mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-29 22:14:41 +08:00
45a3ec8913
The SC8180x platform comes with 4 PCIe controllers, typically used for things such as NVME storage or connecting a SDX55 5G modem. Add a compatible for this, that just reuses the 1.9.0 ops. Link: https://lore.kernel.org/linux-arm-msm/20210725040038.3966348-4-bjorn.andersson@linaro.org/ Link: https://lore.kernel.org/r/20210823154958.305677-2-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [lorenzo.pieralisi@arm.com: updated match data structure] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
1656 lines
43 KiB
C
1656 lines
43 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Qualcomm PCIe root complex driver
|
|
*
|
|
* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
|
|
* Copyright 2015 Linaro Limited.
|
|
*
|
|
* Author: Stanimir Varbanov <svarbanov@mm-sol.com>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/crc8.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/types.h>
|
|
|
|
#include "../../pci.h"
|
|
#include "pcie-designware.h"
|
|
|
|
#define PCIE20_PARF_SYS_CTRL 0x00
|
|
#define MST_WAKEUP_EN BIT(13)
|
|
#define SLV_WAKEUP_EN BIT(12)
|
|
#define MSTR_ACLK_CGC_DIS BIT(10)
|
|
#define SLV_ACLK_CGC_DIS BIT(9)
|
|
#define CORE_CLK_CGC_DIS BIT(6)
|
|
#define AUX_PWR_DET BIT(4)
|
|
#define L23_CLK_RMV_DIS BIT(2)
|
|
#define L1_CLK_RMV_DIS BIT(1)
|
|
|
|
#define PCIE20_PARF_PHY_CTRL 0x40
|
|
#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK GENMASK(20, 16)
|
|
#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) ((x) << 16)
|
|
|
|
#define PCIE20_PARF_PHY_REFCLK 0x4C
|
|
#define PHY_REFCLK_SSP_EN BIT(16)
|
|
#define PHY_REFCLK_USE_PAD BIT(12)
|
|
|
|
#define PCIE20_PARF_DBI_BASE_ADDR 0x168
|
|
#define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16C
|
|
#define PCIE20_PARF_MHI_CLOCK_RESET_CTRL 0x174
|
|
#define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT 0x178
|
|
#define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1A8
|
|
#define PCIE20_PARF_LTSSM 0x1B0
|
|
#define PCIE20_PARF_SID_OFFSET 0x234
|
|
#define PCIE20_PARF_BDF_TRANSLATE_CFG 0x24C
|
|
#define PCIE20_PARF_DEVICE_TYPE 0x1000
|
|
#define PCIE20_PARF_BDF_TO_SID_TABLE_N 0x2000
|
|
|
|
#define PCIE20_ELBI_SYS_CTRL 0x04
|
|
#define PCIE20_ELBI_SYS_CTRL_LT_ENABLE BIT(0)
|
|
|
|
#define PCIE20_AXI_MSTR_RESP_COMP_CTRL0 0x818
|
|
#define CFG_REMOTE_RD_REQ_BRIDGE_SIZE_2K 0x4
|
|
#define CFG_REMOTE_RD_REQ_BRIDGE_SIZE_4K 0x5
|
|
#define PCIE20_AXI_MSTR_RESP_COMP_CTRL1 0x81c
|
|
#define CFG_BRIDGE_SB_INIT BIT(0)
|
|
|
|
#define PCIE_CAP_LINK1_VAL 0x2FD7F
|
|
|
|
#define PCIE20_PARF_Q2A_FLUSH 0x1AC
|
|
|
|
#define PCIE20_MISC_CONTROL_1_REG 0x8BC
|
|
#define DBI_RO_WR_EN 1
|
|
|
|
#define PERST_DELAY_US 1000
|
|
/* PARF registers */
|
|
#define PCIE20_PARF_PCS_DEEMPH 0x34
|
|
#define PCS_DEEMPH_TX_DEEMPH_GEN1(x) ((x) << 16)
|
|
#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x) ((x) << 8)
|
|
#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x) ((x) << 0)
|
|
|
|
#define PCIE20_PARF_PCS_SWING 0x38
|
|
#define PCS_SWING_TX_SWING_FULL(x) ((x) << 8)
|
|
#define PCS_SWING_TX_SWING_LOW(x) ((x) << 0)
|
|
|
|
#define PCIE20_PARF_CONFIG_BITS 0x50
|
|
#define PHY_RX0_EQ(x) ((x) << 24)
|
|
|
|
#define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358
|
|
#define SLV_ADDR_SPACE_SZ 0x10000000
|
|
|
|
#define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xa0
|
|
|
|
#define DEVICE_TYPE_RC 0x4
|
|
|
|
#define QCOM_PCIE_2_1_0_MAX_SUPPLY 3
|
|
#define QCOM_PCIE_2_1_0_MAX_CLOCKS 5
|
|
|
|
#define QCOM_PCIE_CRC8_POLYNOMIAL (BIT(2) | BIT(1) | BIT(0))
|
|
|
|
struct qcom_pcie_resources_2_1_0 {
|
|
struct clk_bulk_data clks[QCOM_PCIE_2_1_0_MAX_CLOCKS];
|
|
struct reset_control *pci_reset;
|
|
struct reset_control *axi_reset;
|
|
struct reset_control *ahb_reset;
|
|
struct reset_control *por_reset;
|
|
struct reset_control *phy_reset;
|
|
struct reset_control *ext_reset;
|
|
struct regulator_bulk_data supplies[QCOM_PCIE_2_1_0_MAX_SUPPLY];
|
|
};
|
|
|
|
struct qcom_pcie_resources_1_0_0 {
|
|
struct clk *iface;
|
|
struct clk *aux;
|
|
struct clk *master_bus;
|
|
struct clk *slave_bus;
|
|
struct reset_control *core;
|
|
struct regulator *vdda;
|
|
};
|
|
|
|
#define QCOM_PCIE_2_3_2_MAX_SUPPLY 2
|
|
struct qcom_pcie_resources_2_3_2 {
|
|
struct clk *aux_clk;
|
|
struct clk *master_clk;
|
|
struct clk *slave_clk;
|
|
struct clk *cfg_clk;
|
|
struct clk *pipe_clk;
|
|
struct regulator_bulk_data supplies[QCOM_PCIE_2_3_2_MAX_SUPPLY];
|
|
};
|
|
|
|
#define QCOM_PCIE_2_4_0_MAX_CLOCKS 4
|
|
struct qcom_pcie_resources_2_4_0 {
|
|
struct clk_bulk_data clks[QCOM_PCIE_2_4_0_MAX_CLOCKS];
|
|
int num_clks;
|
|
struct reset_control *axi_m_reset;
|
|
struct reset_control *axi_s_reset;
|
|
struct reset_control *pipe_reset;
|
|
struct reset_control *axi_m_vmid_reset;
|
|
struct reset_control *axi_s_xpu_reset;
|
|
struct reset_control *parf_reset;
|
|
struct reset_control *phy_reset;
|
|
struct reset_control *axi_m_sticky_reset;
|
|
struct reset_control *pipe_sticky_reset;
|
|
struct reset_control *pwr_reset;
|
|
struct reset_control *ahb_reset;
|
|
struct reset_control *phy_ahb_reset;
|
|
};
|
|
|
|
struct qcom_pcie_resources_2_3_3 {
|
|
struct clk *iface;
|
|
struct clk *axi_m_clk;
|
|
struct clk *axi_s_clk;
|
|
struct clk *ahb_clk;
|
|
struct clk *aux_clk;
|
|
struct reset_control *rst[7];
|
|
};
|
|
|
|
/* 6 clocks typically, 7 for sm8250 */
|
|
struct qcom_pcie_resources_2_7_0 {
|
|
struct clk_bulk_data clks[7];
|
|
int num_clks;
|
|
struct regulator_bulk_data supplies[2];
|
|
struct reset_control *pci_reset;
|
|
struct clk *pipe_clk;
|
|
struct clk *pipe_clk_src;
|
|
struct clk *phy_pipe_clk;
|
|
struct clk *ref_clk_src;
|
|
};
|
|
|
|
union qcom_pcie_resources {
|
|
struct qcom_pcie_resources_1_0_0 v1_0_0;
|
|
struct qcom_pcie_resources_2_1_0 v2_1_0;
|
|
struct qcom_pcie_resources_2_3_2 v2_3_2;
|
|
struct qcom_pcie_resources_2_3_3 v2_3_3;
|
|
struct qcom_pcie_resources_2_4_0 v2_4_0;
|
|
struct qcom_pcie_resources_2_7_0 v2_7_0;
|
|
};
|
|
|
|
struct qcom_pcie;
|
|
|
|
struct qcom_pcie_ops {
|
|
int (*get_resources)(struct qcom_pcie *pcie);
|
|
int (*init)(struct qcom_pcie *pcie);
|
|
int (*post_init)(struct qcom_pcie *pcie);
|
|
void (*deinit)(struct qcom_pcie *pcie);
|
|
void (*post_deinit)(struct qcom_pcie *pcie);
|
|
void (*ltssm_enable)(struct qcom_pcie *pcie);
|
|
int (*config_sid)(struct qcom_pcie *pcie);
|
|
};
|
|
|
|
struct qcom_pcie_cfg {
|
|
const struct qcom_pcie_ops *ops;
|
|
unsigned int pipe_clk_need_muxing:1;
|
|
};
|
|
|
|
struct qcom_pcie {
|
|
struct dw_pcie *pci;
|
|
void __iomem *parf; /* DT parf */
|
|
void __iomem *elbi; /* DT elbi */
|
|
union qcom_pcie_resources res;
|
|
struct phy *phy;
|
|
struct gpio_desc *reset;
|
|
const struct qcom_pcie_ops *ops;
|
|
unsigned int pipe_clk_need_muxing:1;
|
|
};
|
|
|
|
#define to_qcom_pcie(x) dev_get_drvdata((x)->dev)
|
|
|
|
static void qcom_ep_reset_assert(struct qcom_pcie *pcie)
|
|
{
|
|
gpiod_set_value_cansleep(pcie->reset, 1);
|
|
usleep_range(PERST_DELAY_US, PERST_DELAY_US + 500);
|
|
}
|
|
|
|
static void qcom_ep_reset_deassert(struct qcom_pcie *pcie)
|
|
{
|
|
/* Ensure that PERST has been asserted for at least 100 ms */
|
|
msleep(100);
|
|
gpiod_set_value_cansleep(pcie->reset, 0);
|
|
usleep_range(PERST_DELAY_US, PERST_DELAY_US + 500);
|
|
}
|
|
|
|
static int qcom_pcie_start_link(struct dw_pcie *pci)
|
|
{
|
|
struct qcom_pcie *pcie = to_qcom_pcie(pci);
|
|
|
|
/* Enable Link Training state machine */
|
|
if (pcie->ops->ltssm_enable)
|
|
pcie->ops->ltssm_enable(pcie);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void qcom_pcie_2_1_0_ltssm_enable(struct qcom_pcie *pcie)
|
|
{
|
|
u32 val;
|
|
|
|
/* enable link training */
|
|
val = readl(pcie->elbi + PCIE20_ELBI_SYS_CTRL);
|
|
val |= PCIE20_ELBI_SYS_CTRL_LT_ENABLE;
|
|
writel(val, pcie->elbi + PCIE20_ELBI_SYS_CTRL);
|
|
}
|
|
|
|
static int qcom_pcie_get_resources_2_1_0(struct qcom_pcie *pcie)
|
|
{
|
|
struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
|
|
struct dw_pcie *pci = pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
int ret;
|
|
|
|
res->supplies[0].supply = "vdda";
|
|
res->supplies[1].supply = "vdda_phy";
|
|
res->supplies[2].supply = "vdda_refclk";
|
|
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(res->supplies),
|
|
res->supplies);
|
|
if (ret)
|
|
return ret;
|
|
|
|
res->clks[0].id = "iface";
|
|
res->clks[1].id = "core";
|
|
res->clks[2].id = "phy";
|
|
res->clks[3].id = "aux";
|
|
res->clks[4].id = "ref";
|
|
|
|
/* iface, core, phy are required */
|
|
ret = devm_clk_bulk_get(dev, 3, res->clks);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* aux, ref are optional */
|
|
ret = devm_clk_bulk_get_optional(dev, 2, res->clks + 3);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
res->pci_reset = devm_reset_control_get_exclusive(dev, "pci");
|
|
if (IS_ERR(res->pci_reset))
|
|
return PTR_ERR(res->pci_reset);
|
|
|
|
res->axi_reset = devm_reset_control_get_exclusive(dev, "axi");
|
|
if (IS_ERR(res->axi_reset))
|
|
return PTR_ERR(res->axi_reset);
|
|
|
|
res->ahb_reset = devm_reset_control_get_exclusive(dev, "ahb");
|
|
if (IS_ERR(res->ahb_reset))
|
|
return PTR_ERR(res->ahb_reset);
|
|
|
|
res->por_reset = devm_reset_control_get_exclusive(dev, "por");
|
|
if (IS_ERR(res->por_reset))
|
|
return PTR_ERR(res->por_reset);
|
|
|
|
res->ext_reset = devm_reset_control_get_optional_exclusive(dev, "ext");
|
|
if (IS_ERR(res->ext_reset))
|
|
return PTR_ERR(res->ext_reset);
|
|
|
|
res->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
|
|
return PTR_ERR_OR_ZERO(res->phy_reset);
|
|
}
|
|
|
|
static void qcom_pcie_deinit_2_1_0(struct qcom_pcie *pcie)
|
|
{
|
|
struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
|
|
|
|
clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks);
|
|
reset_control_assert(res->pci_reset);
|
|
reset_control_assert(res->axi_reset);
|
|
reset_control_assert(res->ahb_reset);
|
|
reset_control_assert(res->por_reset);
|
|
reset_control_assert(res->ext_reset);
|
|
reset_control_assert(res->phy_reset);
|
|
|
|
writel(1, pcie->parf + PCIE20_PARF_PHY_CTRL);
|
|
|
|
regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
|
|
}
|
|
|
|
static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
|
|
{
|
|
struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
|
|
struct dw_pcie *pci = pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
struct device_node *node = dev->of_node;
|
|
u32 val;
|
|
int ret;
|
|
|
|
/* reset the PCIe interface as uboot can leave it undefined state */
|
|
reset_control_assert(res->pci_reset);
|
|
reset_control_assert(res->axi_reset);
|
|
reset_control_assert(res->ahb_reset);
|
|
reset_control_assert(res->por_reset);
|
|
reset_control_assert(res->ext_reset);
|
|
reset_control_assert(res->phy_reset);
|
|
|
|
writel(1, pcie->parf + PCIE20_PARF_PHY_CTRL);
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(res->supplies), res->supplies);
|
|
if (ret < 0) {
|
|
dev_err(dev, "cannot enable regulators\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = reset_control_deassert(res->ahb_reset);
|
|
if (ret) {
|
|
dev_err(dev, "cannot deassert ahb reset\n");
|
|
goto err_deassert_ahb;
|
|
}
|
|
|
|
ret = reset_control_deassert(res->ext_reset);
|
|
if (ret) {
|
|
dev_err(dev, "cannot deassert ext reset\n");
|
|
goto err_deassert_ext;
|
|
}
|
|
|
|
ret = reset_control_deassert(res->phy_reset);
|
|
if (ret) {
|
|
dev_err(dev, "cannot deassert phy reset\n");
|
|
goto err_deassert_phy;
|
|
}
|
|
|
|
ret = reset_control_deassert(res->pci_reset);
|
|
if (ret) {
|
|
dev_err(dev, "cannot deassert pci reset\n");
|
|
goto err_deassert_pci;
|
|
}
|
|
|
|
ret = reset_control_deassert(res->por_reset);
|
|
if (ret) {
|
|
dev_err(dev, "cannot deassert por reset\n");
|
|
goto err_deassert_por;
|
|
}
|
|
|
|
ret = reset_control_deassert(res->axi_reset);
|
|
if (ret) {
|
|
dev_err(dev, "cannot deassert axi reset\n");
|
|
goto err_deassert_axi;
|
|
}
|
|
|
|
ret = clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks);
|
|
if (ret)
|
|
goto err_clks;
|
|
|
|
/* enable PCIe clocks and resets */
|
|
val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
|
|
val &= ~BIT(0);
|
|
writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
|
|
|
|
if (of_device_is_compatible(node, "qcom,pcie-ipq8064") ||
|
|
of_device_is_compatible(node, "qcom,pcie-ipq8064-v2")) {
|
|
writel(PCS_DEEMPH_TX_DEEMPH_GEN1(24) |
|
|
PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(24) |
|
|
PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(34),
|
|
pcie->parf + PCIE20_PARF_PCS_DEEMPH);
|
|
writel(PCS_SWING_TX_SWING_FULL(120) |
|
|
PCS_SWING_TX_SWING_LOW(120),
|
|
pcie->parf + PCIE20_PARF_PCS_SWING);
|
|
writel(PHY_RX0_EQ(4), pcie->parf + PCIE20_PARF_CONFIG_BITS);
|
|
}
|
|
|
|
if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) {
|
|
/* set TX termination offset */
|
|
val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
|
|
val &= ~PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK;
|
|
val |= PHY_CTRL_PHY_TX0_TERM_OFFSET(7);
|
|
writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
|
|
}
|
|
|
|
/* enable external reference clock */
|
|
val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
|
|
/* USE_PAD is required only for ipq806x */
|
|
if (!of_device_is_compatible(node, "qcom,pcie-apq8064"))
|
|
val &= ~PHY_REFCLK_USE_PAD;
|
|
val |= PHY_REFCLK_SSP_EN;
|
|
writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
|
|
|
|
/* wait for clock acquisition */
|
|
usleep_range(1000, 1500);
|
|
|
|
/* Set the Max TLP size to 2K, instead of using default of 4K */
|
|
writel(CFG_REMOTE_RD_REQ_BRIDGE_SIZE_2K,
|
|
pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL0);
|
|
writel(CFG_BRIDGE_SB_INIT,
|
|
pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1);
|
|
|
|
return 0;
|
|
|
|
err_clks:
|
|
reset_control_assert(res->axi_reset);
|
|
err_deassert_axi:
|
|
reset_control_assert(res->por_reset);
|
|
err_deassert_por:
|
|
reset_control_assert(res->pci_reset);
|
|
err_deassert_pci:
|
|
reset_control_assert(res->phy_reset);
|
|
err_deassert_phy:
|
|
reset_control_assert(res->ext_reset);
|
|
err_deassert_ext:
|
|
reset_control_assert(res->ahb_reset);
|
|
err_deassert_ahb:
|
|
regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int qcom_pcie_get_resources_1_0_0(struct qcom_pcie *pcie)
|
|
{
|
|
struct qcom_pcie_resources_1_0_0 *res = &pcie->res.v1_0_0;
|
|
struct dw_pcie *pci = pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
|
|
res->vdda = devm_regulator_get(dev, "vdda");
|
|
if (IS_ERR(res->vdda))
|
|
return PTR_ERR(res->vdda);
|
|
|
|
res->iface = devm_clk_get(dev, "iface");
|
|
if (IS_ERR(res->iface))
|
|
return PTR_ERR(res->iface);
|
|
|
|
res->aux = devm_clk_get(dev, "aux");
|
|
if (IS_ERR(res->aux))
|
|
return PTR_ERR(res->aux);
|
|
|
|
res->master_bus = devm_clk_get(dev, "master_bus");
|
|
if (IS_ERR(res->master_bus))
|
|
return PTR_ERR(res->master_bus);
|
|
|
|
res->slave_bus = devm_clk_get(dev, "slave_bus");
|
|
if (IS_ERR(res->slave_bus))
|
|
return PTR_ERR(res->slave_bus);
|
|
|
|
res->core = devm_reset_control_get_exclusive(dev, "core");
|
|
return PTR_ERR_OR_ZERO(res->core);
|
|
}
|
|
|
|
static void qcom_pcie_deinit_1_0_0(struct qcom_pcie *pcie)
|
|
{
|
|
struct qcom_pcie_resources_1_0_0 *res = &pcie->res.v1_0_0;
|
|
|
|
reset_control_assert(res->core);
|
|
clk_disable_unprepare(res->slave_bus);
|
|
clk_disable_unprepare(res->master_bus);
|
|
clk_disable_unprepare(res->iface);
|
|
clk_disable_unprepare(res->aux);
|
|
regulator_disable(res->vdda);
|
|
}
|
|
|
|
static int qcom_pcie_init_1_0_0(struct qcom_pcie *pcie)
|
|
{
|
|
struct qcom_pcie_resources_1_0_0 *res = &pcie->res.v1_0_0;
|
|
struct dw_pcie *pci = pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
int ret;
|
|
|
|
ret = reset_control_deassert(res->core);
|
|
if (ret) {
|
|
dev_err(dev, "cannot deassert core reset\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(res->aux);
|
|
if (ret) {
|
|
dev_err(dev, "cannot prepare/enable aux clock\n");
|
|
goto err_res;
|
|
}
|
|
|
|
ret = clk_prepare_enable(res->iface);
|
|
if (ret) {
|
|
dev_err(dev, "cannot prepare/enable iface clock\n");
|
|
goto err_aux;
|
|
}
|
|
|
|
ret = clk_prepare_enable(res->master_bus);
|
|
if (ret) {
|
|
dev_err(dev, "cannot prepare/enable master_bus clock\n");
|
|
goto err_iface;
|
|
}
|
|
|
|
ret = clk_prepare_enable(res->slave_bus);
|
|
if (ret) {
|
|
dev_err(dev, "cannot prepare/enable slave_bus clock\n");
|
|
goto err_master;
|
|
}
|
|
|
|
ret = regulator_enable(res->vdda);
|
|
if (ret) {
|
|
dev_err(dev, "cannot enable vdda regulator\n");
|
|
goto err_slave;
|
|
}
|
|
|
|
/* change DBI base address */
|
|
writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR);
|
|
|
|
if (IS_ENABLED(CONFIG_PCI_MSI)) {
|
|
u32 val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT);
|
|
|
|
val |= BIT(31);
|
|
writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT);
|
|
}
|
|
|
|
return 0;
|
|
err_slave:
|
|
clk_disable_unprepare(res->slave_bus);
|
|
err_master:
|
|
clk_disable_unprepare(res->master_bus);
|
|
err_iface:
|
|
clk_disable_unprepare(res->iface);
|
|
err_aux:
|
|
clk_disable_unprepare(res->aux);
|
|
err_res:
|
|
reset_control_assert(res->core);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void qcom_pcie_2_3_2_ltssm_enable(struct qcom_pcie *pcie)
|
|
{
|
|
u32 val;
|
|
|
|
/* enable link training */
|
|
val = readl(pcie->parf + PCIE20_PARF_LTSSM);
|
|
val |= BIT(8);
|
|
writel(val, pcie->parf + PCIE20_PARF_LTSSM);
|
|
}
|
|
|
|
static int qcom_pcie_get_resources_2_3_2(struct qcom_pcie *pcie)
|
|
{
|
|
struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
|
|
struct dw_pcie *pci = pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
int ret;
|
|
|
|
res->supplies[0].supply = "vdda";
|
|
res->supplies[1].supply = "vddpe-3v3";
|
|
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(res->supplies),
|
|
res->supplies);
|
|
if (ret)
|
|
return ret;
|
|
|
|
res->aux_clk = devm_clk_get(dev, "aux");
|
|
if (IS_ERR(res->aux_clk))
|
|
return PTR_ERR(res->aux_clk);
|
|
|
|
res->cfg_clk = devm_clk_get(dev, "cfg");
|
|
if (IS_ERR(res->cfg_clk))
|
|
return PTR_ERR(res->cfg_clk);
|
|
|
|
res->master_clk = devm_clk_get(dev, "bus_master");
|
|
if (IS_ERR(res->master_clk))
|
|
return PTR_ERR(res->master_clk);
|
|
|
|
res->slave_clk = devm_clk_get(dev, "bus_slave");
|
|
if (IS_ERR(res->slave_clk))
|
|
return PTR_ERR(res->slave_clk);
|
|
|
|
res->pipe_clk = devm_clk_get(dev, "pipe");
|
|
return PTR_ERR_OR_ZERO(res->pipe_clk);
|
|
}
|
|
|
|
static void qcom_pcie_deinit_2_3_2(struct qcom_pcie *pcie)
|
|
{
|
|
struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
|
|
|
|
clk_disable_unprepare(res->slave_clk);
|
|
clk_disable_unprepare(res->master_clk);
|
|
clk_disable_unprepare(res->cfg_clk);
|
|
clk_disable_unprepare(res->aux_clk);
|
|
|
|
regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
|
|
}
|
|
|
|
static void qcom_pcie_post_deinit_2_3_2(struct qcom_pcie *pcie)
|
|
{
|
|
struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
|
|
|
|
clk_disable_unprepare(res->pipe_clk);
|
|
}
|
|
|
|
static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie)
|
|
{
|
|
struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
|
|
struct dw_pcie *pci = pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
u32 val;
|
|
int ret;
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(res->supplies), res->supplies);
|
|
if (ret < 0) {
|
|
dev_err(dev, "cannot enable regulators\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(res->aux_clk);
|
|
if (ret) {
|
|
dev_err(dev, "cannot prepare/enable aux clock\n");
|
|
goto err_aux_clk;
|
|
}
|
|
|
|
ret = clk_prepare_enable(res->cfg_clk);
|
|
if (ret) {
|
|
dev_err(dev, "cannot prepare/enable cfg clock\n");
|
|
goto err_cfg_clk;
|
|
}
|
|
|
|
ret = clk_prepare_enable(res->master_clk);
|
|
if (ret) {
|
|
dev_err(dev, "cannot prepare/enable master clock\n");
|
|
goto err_master_clk;
|
|
}
|
|
|
|
ret = clk_prepare_enable(res->slave_clk);
|
|
if (ret) {
|
|
dev_err(dev, "cannot prepare/enable slave clock\n");
|
|
goto err_slave_clk;
|
|
}
|
|
|
|
/* enable PCIe clocks and resets */
|
|
val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
|
|
val &= ~BIT(0);
|
|
writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
|
|
|
|
/* change DBI base address */
|
|
writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR);
|
|
|
|
/* MAC PHY_POWERDOWN MUX DISABLE */
|
|
val = readl(pcie->parf + PCIE20_PARF_SYS_CTRL);
|
|
val &= ~BIT(29);
|
|
writel(val, pcie->parf + PCIE20_PARF_SYS_CTRL);
|
|
|
|
val = readl(pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL);
|
|
val |= BIT(4);
|
|
writel(val, pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL);
|
|
|
|
val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2);
|
|
val |= BIT(31);
|
|
writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2);
|
|
|
|
return 0;
|
|
|
|
err_slave_clk:
|
|
clk_disable_unprepare(res->master_clk);
|
|
err_master_clk:
|
|
clk_disable_unprepare(res->cfg_clk);
|
|
err_cfg_clk:
|
|
clk_disable_unprepare(res->aux_clk);
|
|
|
|
err_aux_clk:
|
|
regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int qcom_pcie_post_init_2_3_2(struct qcom_pcie *pcie)
|
|
{
|
|
struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
|
|
struct dw_pcie *pci = pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(res->pipe_clk);
|
|
if (ret) {
|
|
dev_err(dev, "cannot prepare/enable pipe clock\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qcom_pcie_get_resources_2_4_0(struct qcom_pcie *pcie)
|
|
{
|
|
struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0;
|
|
struct dw_pcie *pci = pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
bool is_ipq = of_device_is_compatible(dev->of_node, "qcom,pcie-ipq4019");
|
|
int ret;
|
|
|
|
res->clks[0].id = "aux";
|
|
res->clks[1].id = "master_bus";
|
|
res->clks[2].id = "slave_bus";
|
|
res->clks[3].id = "iface";
|
|
|
|
/* qcom,pcie-ipq4019 is defined without "iface" */
|
|
res->num_clks = is_ipq ? 3 : 4;
|
|
|
|
ret = devm_clk_bulk_get(dev, res->num_clks, res->clks);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
res->axi_m_reset = devm_reset_control_get_exclusive(dev, "axi_m");
|
|
if (IS_ERR(res->axi_m_reset))
|
|
return PTR_ERR(res->axi_m_reset);
|
|
|
|
res->axi_s_reset = devm_reset_control_get_exclusive(dev, "axi_s");
|
|
if (IS_ERR(res->axi_s_reset))
|
|
return PTR_ERR(res->axi_s_reset);
|
|
|
|
if (is_ipq) {
|
|
/*
|
|
* These resources relates to the PHY or are secure clocks, but
|
|
* are controlled here for IPQ4019
|
|
*/
|
|
res->pipe_reset = devm_reset_control_get_exclusive(dev, "pipe");
|
|
if (IS_ERR(res->pipe_reset))
|
|
return PTR_ERR(res->pipe_reset);
|
|
|
|
res->axi_m_vmid_reset = devm_reset_control_get_exclusive(dev,
|
|
"axi_m_vmid");
|
|
if (IS_ERR(res->axi_m_vmid_reset))
|
|
return PTR_ERR(res->axi_m_vmid_reset);
|
|
|
|
res->axi_s_xpu_reset = devm_reset_control_get_exclusive(dev,
|
|
"axi_s_xpu");
|
|
if (IS_ERR(res->axi_s_xpu_reset))
|
|
return PTR_ERR(res->axi_s_xpu_reset);
|
|
|
|
res->parf_reset = devm_reset_control_get_exclusive(dev, "parf");
|
|
if (IS_ERR(res->parf_reset))
|
|
return PTR_ERR(res->parf_reset);
|
|
|
|
res->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
|
|
if (IS_ERR(res->phy_reset))
|
|
return PTR_ERR(res->phy_reset);
|
|
}
|
|
|
|
res->axi_m_sticky_reset = devm_reset_control_get_exclusive(dev,
|
|
"axi_m_sticky");
|
|
if (IS_ERR(res->axi_m_sticky_reset))
|
|
return PTR_ERR(res->axi_m_sticky_reset);
|
|
|
|
res->pipe_sticky_reset = devm_reset_control_get_exclusive(dev,
|
|
"pipe_sticky");
|
|
if (IS_ERR(res->pipe_sticky_reset))
|
|
return PTR_ERR(res->pipe_sticky_reset);
|
|
|
|
res->pwr_reset = devm_reset_control_get_exclusive(dev, "pwr");
|
|
if (IS_ERR(res->pwr_reset))
|
|
return PTR_ERR(res->pwr_reset);
|
|
|
|
res->ahb_reset = devm_reset_control_get_exclusive(dev, "ahb");
|
|
if (IS_ERR(res->ahb_reset))
|
|
return PTR_ERR(res->ahb_reset);
|
|
|
|
if (is_ipq) {
|
|
res->phy_ahb_reset = devm_reset_control_get_exclusive(dev, "phy_ahb");
|
|
if (IS_ERR(res->phy_ahb_reset))
|
|
return PTR_ERR(res->phy_ahb_reset);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void qcom_pcie_deinit_2_4_0(struct qcom_pcie *pcie)
|
|
{
|
|
struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0;
|
|
|
|
reset_control_assert(res->axi_m_reset);
|
|
reset_control_assert(res->axi_s_reset);
|
|
reset_control_assert(res->pipe_reset);
|
|
reset_control_assert(res->pipe_sticky_reset);
|
|
reset_control_assert(res->phy_reset);
|
|
reset_control_assert(res->phy_ahb_reset);
|
|
reset_control_assert(res->axi_m_sticky_reset);
|
|
reset_control_assert(res->pwr_reset);
|
|
reset_control_assert(res->ahb_reset);
|
|
clk_bulk_disable_unprepare(res->num_clks, res->clks);
|
|
}
|
|
|
|
static int qcom_pcie_init_2_4_0(struct qcom_pcie *pcie)
|
|
{
|
|
struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0;
|
|
struct dw_pcie *pci = pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
u32 val;
|
|
int ret;
|
|
|
|
ret = reset_control_assert(res->axi_m_reset);
|
|
if (ret) {
|
|
dev_err(dev, "cannot assert axi master reset\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = reset_control_assert(res->axi_s_reset);
|
|
if (ret) {
|
|
dev_err(dev, "cannot assert axi slave reset\n");
|
|
return ret;
|
|
}
|
|
|
|
usleep_range(10000, 12000);
|
|
|
|
ret = reset_control_assert(res->pipe_reset);
|
|
if (ret) {
|
|
dev_err(dev, "cannot assert pipe reset\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = reset_control_assert(res->pipe_sticky_reset);
|
|
if (ret) {
|
|
dev_err(dev, "cannot assert pipe sticky reset\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = reset_control_assert(res->phy_reset);
|
|
if (ret) {
|
|
dev_err(dev, "cannot assert phy reset\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = reset_control_assert(res->phy_ahb_reset);
|
|
if (ret) {
|
|
dev_err(dev, "cannot assert phy ahb reset\n");
|
|
return ret;
|
|
}
|
|
|
|
usleep_range(10000, 12000);
|
|
|
|
ret = reset_control_assert(res->axi_m_sticky_reset);
|
|
if (ret) {
|
|
dev_err(dev, "cannot assert axi master sticky reset\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = reset_control_assert(res->pwr_reset);
|
|
if (ret) {
|
|
dev_err(dev, "cannot assert power reset\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = reset_control_assert(res->ahb_reset);
|
|
if (ret) {
|
|
dev_err(dev, "cannot assert ahb reset\n");
|
|
return ret;
|
|
}
|
|
|
|
usleep_range(10000, 12000);
|
|
|
|
ret = reset_control_deassert(res->phy_ahb_reset);
|
|
if (ret) {
|
|
dev_err(dev, "cannot deassert phy ahb reset\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = reset_control_deassert(res->phy_reset);
|
|
if (ret) {
|
|
dev_err(dev, "cannot deassert phy reset\n");
|
|
goto err_rst_phy;
|
|
}
|
|
|
|
ret = reset_control_deassert(res->pipe_reset);
|
|
if (ret) {
|
|
dev_err(dev, "cannot deassert pipe reset\n");
|
|
goto err_rst_pipe;
|
|
}
|
|
|
|
ret = reset_control_deassert(res->pipe_sticky_reset);
|
|
if (ret) {
|
|
dev_err(dev, "cannot deassert pipe sticky reset\n");
|
|
goto err_rst_pipe_sticky;
|
|
}
|
|
|
|
usleep_range(10000, 12000);
|
|
|
|
ret = reset_control_deassert(res->axi_m_reset);
|
|
if (ret) {
|
|
dev_err(dev, "cannot deassert axi master reset\n");
|
|
goto err_rst_axi_m;
|
|
}
|
|
|
|
ret = reset_control_deassert(res->axi_m_sticky_reset);
|
|
if (ret) {
|
|
dev_err(dev, "cannot deassert axi master sticky reset\n");
|
|
goto err_rst_axi_m_sticky;
|
|
}
|
|
|
|
ret = reset_control_deassert(res->axi_s_reset);
|
|
if (ret) {
|
|
dev_err(dev, "cannot deassert axi slave reset\n");
|
|
goto err_rst_axi_s;
|
|
}
|
|
|
|
ret = reset_control_deassert(res->pwr_reset);
|
|
if (ret) {
|
|
dev_err(dev, "cannot deassert power reset\n");
|
|
goto err_rst_pwr;
|
|
}
|
|
|
|
ret = reset_control_deassert(res->ahb_reset);
|
|
if (ret) {
|
|
dev_err(dev, "cannot deassert ahb reset\n");
|
|
goto err_rst_ahb;
|
|
}
|
|
|
|
usleep_range(10000, 12000);
|
|
|
|
ret = clk_bulk_prepare_enable(res->num_clks, res->clks);
|
|
if (ret)
|
|
goto err_clks;
|
|
|
|
/* enable PCIe clocks and resets */
|
|
val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
|
|
val &= ~BIT(0);
|
|
writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
|
|
|
|
/* change DBI base address */
|
|
writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR);
|
|
|
|
/* MAC PHY_POWERDOWN MUX DISABLE */
|
|
val = readl(pcie->parf + PCIE20_PARF_SYS_CTRL);
|
|
val &= ~BIT(29);
|
|
writel(val, pcie->parf + PCIE20_PARF_SYS_CTRL);
|
|
|
|
val = readl(pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL);
|
|
val |= BIT(4);
|
|
writel(val, pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL);
|
|
|
|
val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2);
|
|
val |= BIT(31);
|
|
writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2);
|
|
|
|
return 0;
|
|
|
|
err_clks:
|
|
reset_control_assert(res->ahb_reset);
|
|
err_rst_ahb:
|
|
reset_control_assert(res->pwr_reset);
|
|
err_rst_pwr:
|
|
reset_control_assert(res->axi_s_reset);
|
|
err_rst_axi_s:
|
|
reset_control_assert(res->axi_m_sticky_reset);
|
|
err_rst_axi_m_sticky:
|
|
reset_control_assert(res->axi_m_reset);
|
|
err_rst_axi_m:
|
|
reset_control_assert(res->pipe_sticky_reset);
|
|
err_rst_pipe_sticky:
|
|
reset_control_assert(res->pipe_reset);
|
|
err_rst_pipe:
|
|
reset_control_assert(res->phy_reset);
|
|
err_rst_phy:
|
|
reset_control_assert(res->phy_ahb_reset);
|
|
return ret;
|
|
}
|
|
|
|
static int qcom_pcie_get_resources_2_3_3(struct qcom_pcie *pcie)
|
|
{
|
|
struct qcom_pcie_resources_2_3_3 *res = &pcie->res.v2_3_3;
|
|
struct dw_pcie *pci = pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
int i;
|
|
const char *rst_names[] = { "axi_m", "axi_s", "pipe",
|
|
"axi_m_sticky", "sticky",
|
|
"ahb", "sleep", };
|
|
|
|
res->iface = devm_clk_get(dev, "iface");
|
|
if (IS_ERR(res->iface))
|
|
return PTR_ERR(res->iface);
|
|
|
|
res->axi_m_clk = devm_clk_get(dev, "axi_m");
|
|
if (IS_ERR(res->axi_m_clk))
|
|
return PTR_ERR(res->axi_m_clk);
|
|
|
|
res->axi_s_clk = devm_clk_get(dev, "axi_s");
|
|
if (IS_ERR(res->axi_s_clk))
|
|
return PTR_ERR(res->axi_s_clk);
|
|
|
|
res->ahb_clk = devm_clk_get(dev, "ahb");
|
|
if (IS_ERR(res->ahb_clk))
|
|
return PTR_ERR(res->ahb_clk);
|
|
|
|
res->aux_clk = devm_clk_get(dev, "aux");
|
|
if (IS_ERR(res->aux_clk))
|
|
return PTR_ERR(res->aux_clk);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(rst_names); i++) {
|
|
res->rst[i] = devm_reset_control_get(dev, rst_names[i]);
|
|
if (IS_ERR(res->rst[i]))
|
|
return PTR_ERR(res->rst[i]);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void qcom_pcie_deinit_2_3_3(struct qcom_pcie *pcie)
|
|
{
|
|
struct qcom_pcie_resources_2_3_3 *res = &pcie->res.v2_3_3;
|
|
|
|
clk_disable_unprepare(res->iface);
|
|
clk_disable_unprepare(res->axi_m_clk);
|
|
clk_disable_unprepare(res->axi_s_clk);
|
|
clk_disable_unprepare(res->ahb_clk);
|
|
clk_disable_unprepare(res->aux_clk);
|
|
}
|
|
|
|
static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie)
|
|
{
|
|
struct qcom_pcie_resources_2_3_3 *res = &pcie->res.v2_3_3;
|
|
struct dw_pcie *pci = pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
|
|
int i, ret;
|
|
u32 val;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(res->rst); i++) {
|
|
ret = reset_control_assert(res->rst[i]);
|
|
if (ret) {
|
|
dev_err(dev, "reset #%d assert failed (%d)\n", i, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
usleep_range(2000, 2500);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(res->rst); i++) {
|
|
ret = reset_control_deassert(res->rst[i]);
|
|
if (ret) {
|
|
dev_err(dev, "reset #%d deassert failed (%d)\n", i,
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Don't have a way to see if the reset has completed.
|
|
* Wait for some time.
|
|
*/
|
|
usleep_range(2000, 2500);
|
|
|
|
ret = clk_prepare_enable(res->iface);
|
|
if (ret) {
|
|
dev_err(dev, "cannot prepare/enable core clock\n");
|
|
goto err_clk_iface;
|
|
}
|
|
|
|
ret = clk_prepare_enable(res->axi_m_clk);
|
|
if (ret) {
|
|
dev_err(dev, "cannot prepare/enable core clock\n");
|
|
goto err_clk_axi_m;
|
|
}
|
|
|
|
ret = clk_prepare_enable(res->axi_s_clk);
|
|
if (ret) {
|
|
dev_err(dev, "cannot prepare/enable axi slave clock\n");
|
|
goto err_clk_axi_s;
|
|
}
|
|
|
|
ret = clk_prepare_enable(res->ahb_clk);
|
|
if (ret) {
|
|
dev_err(dev, "cannot prepare/enable ahb clock\n");
|
|
goto err_clk_ahb;
|
|
}
|
|
|
|
ret = clk_prepare_enable(res->aux_clk);
|
|
if (ret) {
|
|
dev_err(dev, "cannot prepare/enable aux clock\n");
|
|
goto err_clk_aux;
|
|
}
|
|
|
|
writel(SLV_ADDR_SPACE_SZ,
|
|
pcie->parf + PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE);
|
|
|
|
val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
|
|
val &= ~BIT(0);
|
|
writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
|
|
|
|
writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR);
|
|
|
|
writel(MST_WAKEUP_EN | SLV_WAKEUP_EN | MSTR_ACLK_CGC_DIS
|
|
| SLV_ACLK_CGC_DIS | CORE_CLK_CGC_DIS |
|
|
AUX_PWR_DET | L23_CLK_RMV_DIS | L1_CLK_RMV_DIS,
|
|
pcie->parf + PCIE20_PARF_SYS_CTRL);
|
|
writel(0, pcie->parf + PCIE20_PARF_Q2A_FLUSH);
|
|
|
|
writel(PCI_COMMAND_MASTER, pci->dbi_base + PCI_COMMAND);
|
|
writel(DBI_RO_WR_EN, pci->dbi_base + PCIE20_MISC_CONTROL_1_REG);
|
|
writel(PCIE_CAP_LINK1_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP);
|
|
|
|
val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP);
|
|
val &= ~PCI_EXP_LNKCAP_ASPMS;
|
|
writel(val, pci->dbi_base + offset + PCI_EXP_LNKCAP);
|
|
|
|
writel(PCI_EXP_DEVCTL2_COMP_TMOUT_DIS, pci->dbi_base + offset +
|
|
PCI_EXP_DEVCTL2);
|
|
|
|
return 0;
|
|
|
|
err_clk_aux:
|
|
clk_disable_unprepare(res->ahb_clk);
|
|
err_clk_ahb:
|
|
clk_disable_unprepare(res->axi_s_clk);
|
|
err_clk_axi_s:
|
|
clk_disable_unprepare(res->axi_m_clk);
|
|
err_clk_axi_m:
|
|
clk_disable_unprepare(res->iface);
|
|
err_clk_iface:
|
|
/*
|
|
* Not checking for failure, will anyway return
|
|
* the original failure in 'ret'.
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(res->rst); i++)
|
|
reset_control_assert(res->rst[i]);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
|
|
{
|
|
struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
|
|
struct dw_pcie *pci = pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
int ret;
|
|
|
|
res->pci_reset = devm_reset_control_get_exclusive(dev, "pci");
|
|
if (IS_ERR(res->pci_reset))
|
|
return PTR_ERR(res->pci_reset);
|
|
|
|
res->supplies[0].supply = "vdda";
|
|
res->supplies[1].supply = "vddpe-3v3";
|
|
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(res->supplies),
|
|
res->supplies);
|
|
if (ret)
|
|
return ret;
|
|
|
|
res->clks[0].id = "aux";
|
|
res->clks[1].id = "cfg";
|
|
res->clks[2].id = "bus_master";
|
|
res->clks[3].id = "bus_slave";
|
|
res->clks[4].id = "slave_q2a";
|
|
res->clks[5].id = "tbu";
|
|
if (of_device_is_compatible(dev->of_node, "qcom,pcie-sm8250")) {
|
|
res->clks[6].id = "ddrss_sf_tbu";
|
|
res->num_clks = 7;
|
|
} else {
|
|
res->num_clks = 6;
|
|
}
|
|
|
|
ret = devm_clk_bulk_get(dev, res->num_clks, res->clks);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (pcie->pipe_clk_need_muxing) {
|
|
res->pipe_clk_src = devm_clk_get(dev, "pipe_mux");
|
|
if (IS_ERR(res->pipe_clk_src))
|
|
return PTR_ERR(res->pipe_clk_src);
|
|
|
|
res->phy_pipe_clk = devm_clk_get(dev, "phy_pipe");
|
|
if (IS_ERR(res->phy_pipe_clk))
|
|
return PTR_ERR(res->phy_pipe_clk);
|
|
|
|
res->ref_clk_src = devm_clk_get(dev, "ref");
|
|
if (IS_ERR(res->ref_clk_src))
|
|
return PTR_ERR(res->ref_clk_src);
|
|
}
|
|
|
|
res->pipe_clk = devm_clk_get(dev, "pipe");
|
|
return PTR_ERR_OR_ZERO(res->pipe_clk);
|
|
}
|
|
|
|
static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
|
|
{
|
|
struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
|
|
struct dw_pcie *pci = pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
u32 val;
|
|
int ret;
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(res->supplies), res->supplies);
|
|
if (ret < 0) {
|
|
dev_err(dev, "cannot enable regulators\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Set TCXO as clock source for pcie_pipe_clk_src */
|
|
if (pcie->pipe_clk_need_muxing)
|
|
clk_set_parent(res->pipe_clk_src, res->ref_clk_src);
|
|
|
|
ret = clk_bulk_prepare_enable(res->num_clks, res->clks);
|
|
if (ret < 0)
|
|
goto err_disable_regulators;
|
|
|
|
ret = reset_control_assert(res->pci_reset);
|
|
if (ret < 0) {
|
|
dev_err(dev, "cannot deassert pci reset\n");
|
|
goto err_disable_clocks;
|
|
}
|
|
|
|
usleep_range(1000, 1500);
|
|
|
|
ret = reset_control_deassert(res->pci_reset);
|
|
if (ret < 0) {
|
|
dev_err(dev, "cannot deassert pci reset\n");
|
|
goto err_disable_clocks;
|
|
}
|
|
|
|
ret = clk_prepare_enable(res->pipe_clk);
|
|
if (ret) {
|
|
dev_err(dev, "cannot prepare/enable pipe clock\n");
|
|
goto err_disable_clocks;
|
|
}
|
|
|
|
/* configure PCIe to RC mode */
|
|
writel(DEVICE_TYPE_RC, pcie->parf + PCIE20_PARF_DEVICE_TYPE);
|
|
|
|
/* enable PCIe clocks and resets */
|
|
val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
|
|
val &= ~BIT(0);
|
|
writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
|
|
|
|
/* change DBI base address */
|
|
writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR);
|
|
|
|
/* MAC PHY_POWERDOWN MUX DISABLE */
|
|
val = readl(pcie->parf + PCIE20_PARF_SYS_CTRL);
|
|
val &= ~BIT(29);
|
|
writel(val, pcie->parf + PCIE20_PARF_SYS_CTRL);
|
|
|
|
val = readl(pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL);
|
|
val |= BIT(4);
|
|
writel(val, pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL);
|
|
|
|
if (IS_ENABLED(CONFIG_PCI_MSI)) {
|
|
val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT);
|
|
val |= BIT(31);
|
|
writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT);
|
|
}
|
|
|
|
return 0;
|
|
err_disable_clocks:
|
|
clk_bulk_disable_unprepare(res->num_clks, res->clks);
|
|
err_disable_regulators:
|
|
regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void qcom_pcie_deinit_2_7_0(struct qcom_pcie *pcie)
|
|
{
|
|
struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
|
|
|
|
clk_bulk_disable_unprepare(res->num_clks, res->clks);
|
|
regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
|
|
}
|
|
|
|
static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie)
|
|
{
|
|
struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
|
|
|
|
/* Set pipe clock as clock source for pcie_pipe_clk_src */
|
|
if (pcie->pipe_clk_need_muxing)
|
|
clk_set_parent(res->pipe_clk_src, res->phy_pipe_clk);
|
|
|
|
return clk_prepare_enable(res->pipe_clk);
|
|
}
|
|
|
|
static void qcom_pcie_post_deinit_2_7_0(struct qcom_pcie *pcie)
|
|
{
|
|
struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
|
|
|
|
clk_disable_unprepare(res->pipe_clk);
|
|
}
|
|
|
|
static int qcom_pcie_link_up(struct dw_pcie *pci)
|
|
{
|
|
u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
|
|
u16 val = readw(pci->dbi_base + offset + PCI_EXP_LNKSTA);
|
|
|
|
return !!(val & PCI_EXP_LNKSTA_DLLLA);
|
|
}
|
|
|
|
static int qcom_pcie_config_sid_sm8250(struct qcom_pcie *pcie)
|
|
{
|
|
/* iommu map structure */
|
|
struct {
|
|
u32 bdf;
|
|
u32 phandle;
|
|
u32 smmu_sid;
|
|
u32 smmu_sid_len;
|
|
} *map;
|
|
void __iomem *bdf_to_sid_base = pcie->parf + PCIE20_PARF_BDF_TO_SID_TABLE_N;
|
|
struct device *dev = pcie->pci->dev;
|
|
u8 qcom_pcie_crc8_table[CRC8_TABLE_SIZE];
|
|
int i, nr_map, size = 0;
|
|
u32 smmu_sid_base;
|
|
|
|
of_get_property(dev->of_node, "iommu-map", &size);
|
|
if (!size)
|
|
return 0;
|
|
|
|
map = kzalloc(size, GFP_KERNEL);
|
|
if (!map)
|
|
return -ENOMEM;
|
|
|
|
of_property_read_u32_array(dev->of_node,
|
|
"iommu-map", (u32 *)map, size / sizeof(u32));
|
|
|
|
nr_map = size / (sizeof(*map));
|
|
|
|
crc8_populate_msb(qcom_pcie_crc8_table, QCOM_PCIE_CRC8_POLYNOMIAL);
|
|
|
|
/* Registers need to be zero out first */
|
|
memset_io(bdf_to_sid_base, 0, CRC8_TABLE_SIZE * sizeof(u32));
|
|
|
|
/* Extract the SMMU SID base from the first entry of iommu-map */
|
|
smmu_sid_base = map[0].smmu_sid;
|
|
|
|
/* Look for an available entry to hold the mapping */
|
|
for (i = 0; i < nr_map; i++) {
|
|
u16 bdf_be = cpu_to_be16(map[i].bdf);
|
|
u32 val;
|
|
u8 hash;
|
|
|
|
hash = crc8(qcom_pcie_crc8_table, (u8 *)&bdf_be, sizeof(bdf_be),
|
|
0);
|
|
|
|
val = readl(bdf_to_sid_base + hash * sizeof(u32));
|
|
|
|
/* If the register is already populated, look for next available entry */
|
|
while (val) {
|
|
u8 current_hash = hash++;
|
|
u8 next_mask = 0xff;
|
|
|
|
/* If NEXT field is NULL then update it with next hash */
|
|
if (!(val & next_mask)) {
|
|
val |= (u32)hash;
|
|
writel(val, bdf_to_sid_base + current_hash * sizeof(u32));
|
|
}
|
|
|
|
val = readl(bdf_to_sid_base + hash * sizeof(u32));
|
|
}
|
|
|
|
/* BDF [31:16] | SID [15:8] | NEXT [7:0] */
|
|
val = map[i].bdf << 16 | (map[i].smmu_sid - smmu_sid_base) << 8 | 0;
|
|
writel(val, bdf_to_sid_base + hash * sizeof(u32));
|
|
}
|
|
|
|
kfree(map);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qcom_pcie_host_init(struct pcie_port *pp)
|
|
{
|
|
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
|
|
struct qcom_pcie *pcie = to_qcom_pcie(pci);
|
|
int ret;
|
|
|
|
qcom_ep_reset_assert(pcie);
|
|
|
|
ret = pcie->ops->init(pcie);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = phy_power_on(pcie->phy);
|
|
if (ret)
|
|
goto err_deinit;
|
|
|
|
if (pcie->ops->post_init) {
|
|
ret = pcie->ops->post_init(pcie);
|
|
if (ret)
|
|
goto err_disable_phy;
|
|
}
|
|
|
|
qcom_ep_reset_deassert(pcie);
|
|
|
|
if (pcie->ops->config_sid) {
|
|
ret = pcie->ops->config_sid(pcie);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
qcom_ep_reset_assert(pcie);
|
|
if (pcie->ops->post_deinit)
|
|
pcie->ops->post_deinit(pcie);
|
|
err_disable_phy:
|
|
phy_power_off(pcie->phy);
|
|
err_deinit:
|
|
pcie->ops->deinit(pcie);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct dw_pcie_host_ops qcom_pcie_dw_ops = {
|
|
.host_init = qcom_pcie_host_init,
|
|
};
|
|
|
|
/* Qcom IP rev.: 2.1.0 Synopsys IP rev.: 4.01a */
|
|
static const struct qcom_pcie_ops ops_2_1_0 = {
|
|
.get_resources = qcom_pcie_get_resources_2_1_0,
|
|
.init = qcom_pcie_init_2_1_0,
|
|
.deinit = qcom_pcie_deinit_2_1_0,
|
|
.ltssm_enable = qcom_pcie_2_1_0_ltssm_enable,
|
|
};
|
|
|
|
/* Qcom IP rev.: 1.0.0 Synopsys IP rev.: 4.11a */
|
|
static const struct qcom_pcie_ops ops_1_0_0 = {
|
|
.get_resources = qcom_pcie_get_resources_1_0_0,
|
|
.init = qcom_pcie_init_1_0_0,
|
|
.deinit = qcom_pcie_deinit_1_0_0,
|
|
.ltssm_enable = qcom_pcie_2_1_0_ltssm_enable,
|
|
};
|
|
|
|
/* Qcom IP rev.: 2.3.2 Synopsys IP rev.: 4.21a */
|
|
static const struct qcom_pcie_ops ops_2_3_2 = {
|
|
.get_resources = qcom_pcie_get_resources_2_3_2,
|
|
.init = qcom_pcie_init_2_3_2,
|
|
.post_init = qcom_pcie_post_init_2_3_2,
|
|
.deinit = qcom_pcie_deinit_2_3_2,
|
|
.post_deinit = qcom_pcie_post_deinit_2_3_2,
|
|
.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
|
|
};
|
|
|
|
/* Qcom IP rev.: 2.4.0 Synopsys IP rev.: 4.20a */
|
|
static const struct qcom_pcie_ops ops_2_4_0 = {
|
|
.get_resources = qcom_pcie_get_resources_2_4_0,
|
|
.init = qcom_pcie_init_2_4_0,
|
|
.deinit = qcom_pcie_deinit_2_4_0,
|
|
.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
|
|
};
|
|
|
|
/* Qcom IP rev.: 2.3.3 Synopsys IP rev.: 4.30a */
|
|
static const struct qcom_pcie_ops ops_2_3_3 = {
|
|
.get_resources = qcom_pcie_get_resources_2_3_3,
|
|
.init = qcom_pcie_init_2_3_3,
|
|
.deinit = qcom_pcie_deinit_2_3_3,
|
|
.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
|
|
};
|
|
|
|
/* Qcom IP rev.: 2.7.0 Synopsys IP rev.: 4.30a */
|
|
static const struct qcom_pcie_ops ops_2_7_0 = {
|
|
.get_resources = qcom_pcie_get_resources_2_7_0,
|
|
.init = qcom_pcie_init_2_7_0,
|
|
.deinit = qcom_pcie_deinit_2_7_0,
|
|
.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
|
|
.post_init = qcom_pcie_post_init_2_7_0,
|
|
.post_deinit = qcom_pcie_post_deinit_2_7_0,
|
|
};
|
|
|
|
/* Qcom IP rev.: 1.9.0 */
|
|
static const struct qcom_pcie_ops ops_1_9_0 = {
|
|
.get_resources = qcom_pcie_get_resources_2_7_0,
|
|
.init = qcom_pcie_init_2_7_0,
|
|
.deinit = qcom_pcie_deinit_2_7_0,
|
|
.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
|
|
.post_init = qcom_pcie_post_init_2_7_0,
|
|
.post_deinit = qcom_pcie_post_deinit_2_7_0,
|
|
.config_sid = qcom_pcie_config_sid_sm8250,
|
|
};
|
|
|
|
static const struct qcom_pcie_cfg apq8084_cfg = {
|
|
.ops = &ops_1_0_0,
|
|
};
|
|
|
|
static const struct qcom_pcie_cfg ipq8064_cfg = {
|
|
.ops = &ops_2_1_0,
|
|
};
|
|
|
|
static const struct qcom_pcie_cfg msm8996_cfg = {
|
|
.ops = &ops_2_3_2,
|
|
};
|
|
|
|
static const struct qcom_pcie_cfg ipq8074_cfg = {
|
|
.ops = &ops_2_3_3,
|
|
};
|
|
|
|
static const struct qcom_pcie_cfg ipq4019_cfg = {
|
|
.ops = &ops_2_4_0,
|
|
};
|
|
|
|
static const struct qcom_pcie_cfg sdm845_cfg = {
|
|
.ops = &ops_2_7_0,
|
|
};
|
|
|
|
static const struct qcom_pcie_cfg sm8250_cfg = {
|
|
.ops = &ops_1_9_0,
|
|
};
|
|
|
|
static const struct qcom_pcie_cfg sc7280_cfg = {
|
|
.ops = &ops_1_9_0,
|
|
.pipe_clk_need_muxing = true,
|
|
};
|
|
|
|
static const struct dw_pcie_ops dw_pcie_ops = {
|
|
.link_up = qcom_pcie_link_up,
|
|
.start_link = qcom_pcie_start_link,
|
|
};
|
|
|
|
static int qcom_pcie_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct pcie_port *pp;
|
|
struct dw_pcie *pci;
|
|
struct qcom_pcie *pcie;
|
|
const struct qcom_pcie_cfg *pcie_cfg;
|
|
int ret;
|
|
|
|
pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
|
|
if (!pcie)
|
|
return -ENOMEM;
|
|
|
|
pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
|
|
if (!pci)
|
|
return -ENOMEM;
|
|
|
|
pm_runtime_enable(dev);
|
|
ret = pm_runtime_get_sync(dev);
|
|
if (ret < 0)
|
|
goto err_pm_runtime_put;
|
|
|
|
pci->dev = dev;
|
|
pci->ops = &dw_pcie_ops;
|
|
pp = &pci->pp;
|
|
|
|
pcie->pci = pci;
|
|
|
|
pcie_cfg = of_device_get_match_data(dev);
|
|
if (!pcie_cfg || !pcie_cfg->ops) {
|
|
dev_err(dev, "Invalid platform data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
pcie->ops = pcie_cfg->ops;
|
|
pcie->pipe_clk_need_muxing = pcie_cfg->pipe_clk_need_muxing;
|
|
|
|
pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(pcie->reset)) {
|
|
ret = PTR_ERR(pcie->reset);
|
|
goto err_pm_runtime_put;
|
|
}
|
|
|
|
pcie->parf = devm_platform_ioremap_resource_byname(pdev, "parf");
|
|
if (IS_ERR(pcie->parf)) {
|
|
ret = PTR_ERR(pcie->parf);
|
|
goto err_pm_runtime_put;
|
|
}
|
|
|
|
pcie->elbi = devm_platform_ioremap_resource_byname(pdev, "elbi");
|
|
if (IS_ERR(pcie->elbi)) {
|
|
ret = PTR_ERR(pcie->elbi);
|
|
goto err_pm_runtime_put;
|
|
}
|
|
|
|
pcie->phy = devm_phy_optional_get(dev, "pciephy");
|
|
if (IS_ERR(pcie->phy)) {
|
|
ret = PTR_ERR(pcie->phy);
|
|
goto err_pm_runtime_put;
|
|
}
|
|
|
|
ret = pcie->ops->get_resources(pcie);
|
|
if (ret)
|
|
goto err_pm_runtime_put;
|
|
|
|
pp->ops = &qcom_pcie_dw_ops;
|
|
|
|
ret = phy_init(pcie->phy);
|
|
if (ret) {
|
|
pm_runtime_disable(&pdev->dev);
|
|
goto err_pm_runtime_put;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, pcie);
|
|
|
|
ret = dw_pcie_host_init(pp);
|
|
if (ret) {
|
|
dev_err(dev, "cannot initialize host\n");
|
|
pm_runtime_disable(&pdev->dev);
|
|
goto err_pm_runtime_put;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_pm_runtime_put:
|
|
pm_runtime_put(dev);
|
|
pm_runtime_disable(dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct of_device_id qcom_pcie_match[] = {
|
|
{ .compatible = "qcom,pcie-apq8084", .data = &apq8084_cfg },
|
|
{ .compatible = "qcom,pcie-ipq8064", .data = &ipq8064_cfg },
|
|
{ .compatible = "qcom,pcie-ipq8064-v2", .data = &ipq8064_cfg },
|
|
{ .compatible = "qcom,pcie-apq8064", .data = &ipq8064_cfg },
|
|
{ .compatible = "qcom,pcie-msm8996", .data = &msm8996_cfg },
|
|
{ .compatible = "qcom,pcie-ipq8074", .data = &ipq8074_cfg },
|
|
{ .compatible = "qcom,pcie-ipq4019", .data = &ipq4019_cfg },
|
|
{ .compatible = "qcom,pcie-qcs404", .data = &ipq4019_cfg },
|
|
{ .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg },
|
|
{ .compatible = "qcom,pcie-sm8250", .data = &sm8250_cfg },
|
|
{ .compatible = "qcom,pcie-sc8180x", .data = &sm8250_cfg },
|
|
{ .compatible = "qcom,pcie-sc7280", .data = &sc7280_cfg },
|
|
{ }
|
|
};
|
|
|
|
static void qcom_fixup_class(struct pci_dev *dev)
|
|
{
|
|
dev->class = PCI_CLASS_BRIDGE_PCI << 8;
|
|
}
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0101, qcom_fixup_class);
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0104, qcom_fixup_class);
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0106, qcom_fixup_class);
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0107, qcom_fixup_class);
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0302, qcom_fixup_class);
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1000, qcom_fixup_class);
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1001, qcom_fixup_class);
|
|
|
|
static struct platform_driver qcom_pcie_driver = {
|
|
.probe = qcom_pcie_probe,
|
|
.driver = {
|
|
.name = "qcom-pcie",
|
|
.suppress_bind_attrs = true,
|
|
.of_match_table = qcom_pcie_match,
|
|
},
|
|
};
|
|
builtin_platform_driver(qcom_pcie_driver);
|