mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-18 00:24:58 +08:00
e611c0fe31
Here are the large set of USB and PHY driver updates for 5.8-rc1. Nothing huge, just lots of little things: - USB gadget fixes and additions all over the place - new PHY drivers - PHY driver fixes and updates - XHCI driver updates - musb driver updates - more USB-serial driver ids added - various USB quirks added - thunderbolt minor updates and fixes - typec updates and additions Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzqVA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynftwCfeanyI6TR5AdfJVZN50B6/ySvVwcAn07i9VRX tnt2kz0UqReYpLt0wyJ7 =YP7o -----END PGP SIGNATURE----- Merge tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY driver updates from Greg KH: "Here are the large set of USB and PHY driver updates for 5.8-rc1. Nothing huge, just lots of little things: - USB gadget fixes and additions all over the place - new PHY drivers - PHY driver fixes and updates - XHCI driver updates - musb driver updates - more USB-serial driver ids added - various USB quirks added - thunderbolt minor updates and fixes - typec updates and additions All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (245 commits) usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs usb: dwc3: meson-g12a: fix error path when fetching the reset line fails Revert "dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings" Revert "dt-bindings: usb: qcom,dwc3: Add compatible for SC7180" Revert "dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver" USB: serial: ch341: fix lockup of devices with limited prescaler USB: serial: ch341: add basis for quirk detection CDC-ACM: heed quirk also in error handling USB: serial: option: add Telit LE910C1-EUX compositions usb: musb: Fix runtime PM imbalance on error usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle usb: musb: use true for 'use_dma' usb: musb: start session in resume for host port usb: musb: return -ESHUTDOWN in urb when three-strikes error happened USB: serial: qcserial: add DW5816e QDL support thunderbolt: Add trivial .shutdown usb: dwc3: keystone: Turn on USB3 PHY before controller dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property dt-bindings: usb: convert keystone-usb.txt to YAML ...
1457 lines
48 KiB
Plaintext
1457 lines
48 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* sama5d4.dtsi - Device Tree Include file for SAMA5D4 family SoC
|
|
*
|
|
* Copyright (C) 2014 Atmel,
|
|
* 2014 Nicolas Ferre <nicolas.ferre@atmel.com>
|
|
*/
|
|
|
|
#include <dt-bindings/clock/at91.h>
|
|
#include <dt-bindings/dma/at91.h>
|
|
#include <dt-bindings/pinctrl/at91.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
model = "Atmel SAMA5D4 family SoC";
|
|
compatible = "atmel,sama5d4";
|
|
interrupt-parent = <&aic>;
|
|
|
|
aliases {
|
|
serial0 = &usart3;
|
|
serial1 = &usart4;
|
|
serial2 = &usart2;
|
|
serial3 = &usart0;
|
|
serial4 = &usart1;
|
|
serial5 = &uart0;
|
|
serial6 = &uart1;
|
|
gpio0 = &pioA;
|
|
gpio1 = &pioB;
|
|
gpio2 = &pioC;
|
|
gpio3 = &pioD;
|
|
gpio4 = &pioE;
|
|
pwm0 = &pwm0;
|
|
ssc0 = &ssc0;
|
|
ssc1 = &ssc1;
|
|
tcb0 = &tcb0;
|
|
tcb1 = &tcb1;
|
|
i2c0 = &i2c0;
|
|
i2c1 = &i2c1;
|
|
i2c2 = &i2c2;
|
|
};
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a5";
|
|
reg = <0>;
|
|
next-level-cache = <&L2>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x20000000 0x20000000>;
|
|
};
|
|
|
|
clocks {
|
|
slow_xtal: slow_xtal {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
main_xtal: main_xtal {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
adc_op_clk: adc_op_clk{
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <1000000>;
|
|
};
|
|
};
|
|
|
|
ns_sram: sram@210000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0x00210000 0x10000>;
|
|
};
|
|
|
|
ahb {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
nfc_sram: sram@100000 {
|
|
compatible = "mmio-sram";
|
|
no-memory-wc;
|
|
reg = <0x100000 0x2400>;
|
|
};
|
|
|
|
usb0: gadget@400000 {
|
|
compatible = "atmel,sama5d3-udc";
|
|
reg = <0x00400000 0x100000
|
|
0xfc02c000 0x4000>;
|
|
interrupts = <47 IRQ_TYPE_LEVEL_HIGH 2>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 47>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
|
|
clock-names = "pclk", "hclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb1: ohci@500000 {
|
|
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
|
|
reg = <0x00500000 0x100000>;
|
|
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_SYSTEM 6>;
|
|
clock-names = "ohci_clk", "hclk", "uhpck";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb2: ehci@600000 {
|
|
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
|
|
reg = <0x00600000 0x100000>;
|
|
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
|
|
clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 46>;
|
|
clock-names = "usb_clk", "ehci_clk";
|
|
status = "disabled";
|
|
};
|
|
|
|
L2: cache-controller@a00000 {
|
|
compatible = "arm,pl310-cache";
|
|
reg = <0x00a00000 0x1000>;
|
|
interrupts = <67 IRQ_TYPE_LEVEL_HIGH 4>;
|
|
cache-unified;
|
|
cache-level = <2>;
|
|
};
|
|
|
|
ebi: ebi@10000000 {
|
|
compatible = "atmel,sama5d3-ebi";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
atmel,smc = <&hsmc>;
|
|
reg = <0x10000000 0x10000000
|
|
0x60000000 0x28000000>;
|
|
ranges = <0x0 0x0 0x10000000 0x10000000
|
|
0x1 0x0 0x60000000 0x10000000
|
|
0x2 0x0 0x70000000 0x10000000
|
|
0x3 0x0 0x80000000 0x8000000>;
|
|
clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
|
|
status = "disabled";
|
|
|
|
nand_controller: nand-controller {
|
|
compatible = "atmel,sama5d3-nand-controller";
|
|
atmel,nfc-sram = <&nfc_sram>;
|
|
atmel,nfc-io = <&nfc_io>;
|
|
ecc-engine = <&pmecc>;
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
nfc_io: nfc-io@90000000 {
|
|
compatible = "atmel,sama5d3-nfc-io", "syscon";
|
|
reg = <0x90000000 0x8000000>;
|
|
};
|
|
|
|
apb {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
hlcdc: hlcdc@f0000000 {
|
|
compatible = "atmel,sama5d4-hlcdc";
|
|
reg = <0xf0000000 0x4000>;
|
|
interrupts = <51 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
|
|
clock-names = "periph_clk","sys_clk", "slow_clk";
|
|
status = "disabled";
|
|
|
|
hlcdc-display-controller {
|
|
compatible = "atmel,hlcdc-display-controller";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
hlcdc_pwm: hlcdc-pwm {
|
|
compatible = "atmel,hlcdc-pwm";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_lcd_pwm>;
|
|
#pwm-cells = <3>;
|
|
};
|
|
};
|
|
|
|
dma1: dma-controller@f0004000 {
|
|
compatible = "atmel,sama5d4-dma";
|
|
reg = <0xf0004000 0x200>;
|
|
interrupts = <50 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
#dma-cells = <1>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 50>;
|
|
clock-names = "dma_clk";
|
|
};
|
|
|
|
isi: isi@f0008000 {
|
|
compatible = "atmel,at91sam9g45-isi";
|
|
reg = <0xf0008000 0x4000>;
|
|
interrupts = <52 IRQ_TYPE_LEVEL_HIGH 5>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_isi_data_0_7>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
|
|
clock-names = "isi_clk";
|
|
status = "disabled";
|
|
port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
ramc0: ramc@f0010000 {
|
|
compatible = "atmel,sama5d3-ddramc";
|
|
reg = <0xf0010000 0x200>;
|
|
clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 16>;
|
|
clock-names = "ddrck", "mpddr";
|
|
};
|
|
|
|
dma0: dma-controller@f0014000 {
|
|
compatible = "atmel,sama5d4-dma";
|
|
reg = <0xf0014000 0x200>;
|
|
interrupts = <8 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
#dma-cells = <1>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
|
|
clock-names = "dma_clk";
|
|
};
|
|
|
|
pmc: pmc@f0018000 {
|
|
compatible = "atmel,sama5d4-pmc", "syscon";
|
|
reg = <0xf0018000 0x120>;
|
|
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
|
|
#clock-cells = <2>;
|
|
clocks = <&clk32k>, <&main_xtal>;
|
|
clock-names = "slow_clk", "main_xtal";
|
|
};
|
|
|
|
mmc0: mmc@f8000000 {
|
|
compatible = "atmel,hsmci";
|
|
reg = <0xf8000000 0x600>;
|
|
interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
dmas = <&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(0))>;
|
|
dma-names = "rxtx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 35>;
|
|
clock-names = "mci_clk";
|
|
};
|
|
|
|
uart0: serial@f8004000 {
|
|
compatible = "atmel,at91sam9260-usart";
|
|
reg = <0xf8004000 0x100>;
|
|
interrupts = <27 IRQ_TYPE_LEVEL_HIGH 5>;
|
|
dmas = <&dma0
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(22))>,
|
|
<&dma0
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(23))>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart0>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
|
|
clock-names = "usart";
|
|
status = "disabled";
|
|
};
|
|
|
|
ssc0: ssc@f8008000 {
|
|
compatible = "atmel,at91sam9g45-ssc";
|
|
reg = <0xf8008000 0x4000>;
|
|
interrupts = <48 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
|
|
dmas = <&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(26))>,
|
|
<&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(27))>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
|
|
clock-names = "pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm0: pwm@f800c000 {
|
|
compatible = "atmel,sama5d3-pwm";
|
|
reg = <0xf800c000 0x300>;
|
|
interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>;
|
|
#pwm-cells = <3>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi0: spi@f8010000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "atmel,at91rm9200-spi";
|
|
reg = <0xf8010000 0x100>;
|
|
interrupts = <37 IRQ_TYPE_LEVEL_HIGH 3>;
|
|
dmas = <&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(10))>,
|
|
<&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(11))>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_spi0>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
|
|
clock-names = "spi_clk";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c0: i2c@f8014000 {
|
|
compatible = "atmel,sama5d4-i2c";
|
|
reg = <0xf8014000 0x4000>;
|
|
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 6>;
|
|
dmas = <&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(2))>,
|
|
<&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(3))>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default", "gpio";
|
|
pinctrl-0 = <&pinctrl_i2c0>;
|
|
pinctrl-1 = <&pinctrl_i2c0_gpio>;
|
|
sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
|
|
scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@f8018000 {
|
|
compatible = "atmel,sama5d4-i2c";
|
|
reg = <0xf8018000 0x4000>;
|
|
interrupts = <33 IRQ_TYPE_LEVEL_HIGH 6>;
|
|
dmas = <&dma0
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(4))>,
|
|
<&dma0
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(5))>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default", "gpio";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
pinctrl-1 = <&pinctrl_i2c1_gpio>;
|
|
sda-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
|
|
scl-gpios = <&pioE 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
|
|
status = "disabled";
|
|
};
|
|
|
|
tcb0: timer@f801c000 {
|
|
compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0xf801c000 0x100>;
|
|
interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 40>, <&clk32k>;
|
|
clock-names = "t0_clk", "slow_clk";
|
|
};
|
|
|
|
macb0: ethernet@f8020000 {
|
|
compatible = "atmel,sama5d4-gem";
|
|
reg = <0xf8020000 0x100>;
|
|
interrupts = <54 IRQ_TYPE_LEVEL_HIGH 3>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_macb0_rmii>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 54>, <&pmc PMC_TYPE_PERIPHERAL 54>;
|
|
clock-names = "hclk", "pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@f8024000 {
|
|
compatible = "atmel,sama5d4-i2c";
|
|
reg = <0xf8024000 0x4000>;
|
|
interrupts = <34 IRQ_TYPE_LEVEL_HIGH 6>;
|
|
dmas = <&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(6))>,
|
|
<&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(7))>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default", "gpio";
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
|
pinctrl-1 = <&pinctrl_i2c2_gpio>;
|
|
sda-gpios = <&pioB 29 GPIO_ACTIVE_HIGH>;
|
|
scl-gpios = <&pioB 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sfr: sfr@f8028000 {
|
|
compatible = "atmel,sama5d4-sfr", "syscon";
|
|
reg = <0xf8028000 0x60>;
|
|
};
|
|
|
|
usart0: serial@f802c000 {
|
|
compatible = "atmel,at91sam9260-usart";
|
|
reg = <0xf802c000 0x100>;
|
|
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
|
|
dmas = <&dma0
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(36))>,
|
|
<&dma0
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(37))>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts &pinctrl_usart0_cts>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
|
|
clock-names = "usart";
|
|
status = "disabled";
|
|
};
|
|
|
|
usart1: serial@f8030000 {
|
|
compatible = "atmel,at91sam9260-usart";
|
|
reg = <0xf8030000 0x100>;
|
|
interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
|
|
dmas = <&dma0
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(38))>,
|
|
<&dma0
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(39))>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts &pinctrl_usart1_cts>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
|
|
clock-names = "usart";
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc1: mmc@fc000000 {
|
|
compatible = "atmel,hsmci";
|
|
reg = <0xfc000000 0x600>;
|
|
interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
dmas = <&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(1))>;
|
|
dma-names = "rxtx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 36>;
|
|
clock-names = "mci_clk";
|
|
};
|
|
|
|
uart1: serial@fc004000 {
|
|
compatible = "atmel,at91sam9260-usart";
|
|
reg = <0xfc004000 0x100>;
|
|
interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
|
|
dmas = <&dma0
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(24))>,
|
|
<&dma0
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(25))>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
|
|
clock-names = "usart";
|
|
status = "disabled";
|
|
};
|
|
|
|
usart2: serial@fc008000 {
|
|
compatible = "atmel,at91sam9260-usart";
|
|
reg = <0xfc008000 0x100>;
|
|
interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
|
|
dmas = <&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(16))>,
|
|
<&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(17))>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts &pinctrl_usart2_cts>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
|
|
clock-names = "usart";
|
|
status = "disabled";
|
|
};
|
|
|
|
usart3: serial@fc00c000 {
|
|
compatible = "atmel,at91sam9260-usart";
|
|
reg = <0xfc00c000 0x100>;
|
|
interrupts = <30 IRQ_TYPE_LEVEL_HIGH 5>;
|
|
dmas = <&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(18))>,
|
|
<&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(19))>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usart3>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
|
|
clock-names = "usart";
|
|
status = "disabled";
|
|
};
|
|
|
|
usart4: serial@fc010000 {
|
|
compatible = "atmel,at91sam9260-usart";
|
|
reg = <0xfc010000 0x100>;
|
|
interrupts = <31 IRQ_TYPE_LEVEL_HIGH 5>;
|
|
dmas = <&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(20))>,
|
|
<&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(21))>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usart4>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 31>;
|
|
clock-names = "usart";
|
|
status = "disabled";
|
|
};
|
|
|
|
ssc1: ssc@fc014000 {
|
|
compatible = "atmel,at91sam9g45-ssc";
|
|
reg = <0xfc014000 0x4000>;
|
|
interrupts = <49 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
|
|
dmas = <&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(28))>,
|
|
<&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(29))>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
|
|
clock-names = "pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi1: spi@fc018000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "atmel,at91rm9200-spi";
|
|
reg = <0xfc018000 0x100>;
|
|
interrupts = <38 IRQ_TYPE_LEVEL_HIGH 3>;
|
|
dmas = <&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(12))>,
|
|
<&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(13))>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_spi1>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
|
|
clock-names = "spi_clk";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi2: spi@fc01c000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "atmel,at91rm9200-spi";
|
|
reg = <0xfc01c000 0x100>;
|
|
interrupts = <39 IRQ_TYPE_LEVEL_HIGH 3>;
|
|
dmas = <&dma0
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(14))>,
|
|
<&dma0
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(15))>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_spi2>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
|
|
clock-names = "spi_clk";
|
|
status = "disabled";
|
|
};
|
|
|
|
tcb1: timer@fc020000 {
|
|
compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0xfc020000 0x100>;
|
|
interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 41>, <&clk32k>;
|
|
clock-names = "t0_clk", "slow_clk";
|
|
};
|
|
|
|
tcb2: timer@fc024000 {
|
|
compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0xfc024000 0x100>;
|
|
interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&clk32k>;
|
|
clock-names = "t0_clk", "slow_clk";
|
|
};
|
|
|
|
macb1: ethernet@fc028000 {
|
|
compatible = "atmel,sama5d4-gem";
|
|
reg = <0xfc028000 0x100>;
|
|
interrupts = <55 IRQ_TYPE_LEVEL_HIGH 3>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_macb1_rmii>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_PERIPHERAL 55>;
|
|
clock-names = "hclk", "pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
trng@fc030000 {
|
|
compatible = "atmel,at91sam9g45-trng";
|
|
reg = <0xfc030000 0x100>;
|
|
interrupts = <53 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 53>;
|
|
};
|
|
|
|
adc0: adc@fc034000 {
|
|
compatible = "atmel,at91sam9x5-adc";
|
|
reg = <0xfc034000 0x100>;
|
|
interrupts = <44 IRQ_TYPE_LEVEL_HIGH 5>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 44>,
|
|
<&adc_op_clk>;
|
|
clock-names = "adc_clk", "adc_op_clk";
|
|
atmel,adc-channels-used = <0x01f>;
|
|
atmel,adc-startup-time = <40>;
|
|
atmel,adc-use-external-triggers;
|
|
atmel,adc-vref = <3000>;
|
|
atmel,adc-res = <8 10>;
|
|
atmel,adc-sample-hold-time = <11>;
|
|
atmel,adc-res-names = "lowres", "highres";
|
|
atmel,adc-ts-pressure-threshold = <10000>;
|
|
status = "disabled";
|
|
|
|
trigger0 {
|
|
trigger-name = "external-rising";
|
|
trigger-value = <0x1>;
|
|
trigger-external;
|
|
};
|
|
trigger1 {
|
|
trigger-name = "external-falling";
|
|
trigger-value = <0x2>;
|
|
trigger-external;
|
|
};
|
|
trigger2 {
|
|
trigger-name = "external-any";
|
|
trigger-value = <0x3>;
|
|
trigger-external;
|
|
};
|
|
trigger3 {
|
|
trigger-name = "continuous";
|
|
trigger-value = <0x6>;
|
|
};
|
|
};
|
|
|
|
aes@fc044000 {
|
|
compatible = "atmel,at91sam9g46-aes";
|
|
reg = <0xfc044000 0x100>;
|
|
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(41))>,
|
|
<&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(40))>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
|
|
clock-names = "aes_clk";
|
|
status = "okay";
|
|
};
|
|
|
|
tdes@fc04c000 {
|
|
compatible = "atmel,at91sam9g46-tdes";
|
|
reg = <0xfc04c000 0x100>;
|
|
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(42))>,
|
|
<&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(43))>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
|
|
clock-names = "tdes_clk";
|
|
status = "okay";
|
|
};
|
|
|
|
sha@fc050000 {
|
|
compatible = "atmel,at91sam9g46-sha";
|
|
reg = <0xfc050000 0x100>;
|
|
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(44))>;
|
|
dma-names = "tx";
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
|
|
clock-names = "sha_clk";
|
|
status = "okay";
|
|
};
|
|
|
|
hsmc: smc@fc05c000 {
|
|
compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
|
|
reg = <0xfc05c000 0x1000>;
|
|
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 6>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
pmecc: ecc-engine@ffffc070 {
|
|
compatible = "atmel,sama5d4-pmecc";
|
|
reg = <0xfc05c070 0x490>,
|
|
<0xfc05c500 0x100>;
|
|
};
|
|
};
|
|
|
|
reset_controller: rstc@fc068600 {
|
|
compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
|
|
reg = <0xfc068600 0x10>;
|
|
clocks = <&clk32k>;
|
|
};
|
|
|
|
shutdown_controller: shdwc@fc068610 {
|
|
compatible = "atmel,at91sam9x5-shdwc";
|
|
reg = <0xfc068610 0x10>;
|
|
clocks = <&clk32k>;
|
|
};
|
|
|
|
pit: timer@fc068630 {
|
|
compatible = "atmel,at91sam9260-pit";
|
|
reg = <0xfc068630 0x10>;
|
|
interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
|
|
clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>;
|
|
};
|
|
|
|
watchdog: watchdog@fc068640 {
|
|
compatible = "atmel,sama5d4-wdt";
|
|
reg = <0xfc068640 0x10>;
|
|
interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
|
|
clocks = <&clk32k>;
|
|
status = "disabled";
|
|
};
|
|
|
|
clk32k: sckc@fc068650 {
|
|
compatible = "atmel,sama5d4-sckc";
|
|
reg = <0xfc068650 0x4>;
|
|
#clock-cells = <0>;
|
|
clocks = <&slow_xtal>;
|
|
};
|
|
|
|
rtc@fc0686b0 {
|
|
compatible = "atmel,sama5d4-rtc";
|
|
reg = <0xfc0686b0 0x30>;
|
|
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
|
|
clocks = <&clk32k>;
|
|
};
|
|
|
|
dbgu: serial@fc069000 {
|
|
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
|
|
reg = <0xfc069000 0x200>;
|
|
interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_dbgu>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
|
|
clock-names = "usart";
|
|
status = "disabled";
|
|
};
|
|
|
|
|
|
pinctrl: pinctrl@fc06a000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
|
|
ranges = <0xfc068000 0xfc068000 0x100
|
|
0xfc06a000 0xfc06a000 0x4000>;
|
|
/* WARNING: revisit as pin spec has changed */
|
|
atmel,mux-mask = <
|
|
/* A B C */
|
|
0xffffffff 0x3ffcfe7c 0x1c010101 /* pioA */
|
|
0x7fffffff 0xfffccc3a 0x3f00cc3a /* pioB */
|
|
0xffffffff 0x3ff83fff 0xff00ffff /* pioC */
|
|
0x0003ff00 0x8002a800 0x00000000 /* pioD */
|
|
0xffffffff 0x7fffffff 0x76fff1bf /* pioE */
|
|
>;
|
|
|
|
pioA: gpio@fc06a000 {
|
|
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
|
|
reg = <0xfc06a000 0x100>;
|
|
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 1>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
|
|
};
|
|
|
|
pioB: gpio@fc06b000 {
|
|
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
|
|
reg = <0xfc06b000 0x100>;
|
|
interrupts = <24 IRQ_TYPE_LEVEL_HIGH 1>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
|
|
};
|
|
|
|
pioC: gpio@fc06c000 {
|
|
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
|
|
reg = <0xfc06c000 0x100>;
|
|
interrupts = <25 IRQ_TYPE_LEVEL_HIGH 1>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
|
|
};
|
|
|
|
pioD: gpio@fc068000 {
|
|
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
|
|
reg = <0xfc068000 0x100>;
|
|
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
|
|
};
|
|
|
|
pioE: gpio@fc06d000 {
|
|
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
|
|
reg = <0xfc06d000 0x100>;
|
|
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 1>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
|
|
};
|
|
|
|
/* pinctrl pin settings */
|
|
adc0 {
|
|
pinctrl_adc0_adtrg: adc0_adtrg {
|
|
atmel,pins =
|
|
<AT91_PIOE 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* conflicts with USBA_VBUS */
|
|
};
|
|
pinctrl_adc0_ad0: adc0_ad0 {
|
|
atmel,pins =
|
|
<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
pinctrl_adc0_ad1: adc0_ad1 {
|
|
atmel,pins =
|
|
<AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
pinctrl_adc0_ad2: adc0_ad2 {
|
|
atmel,pins =
|
|
<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
pinctrl_adc0_ad3: adc0_ad3 {
|
|
atmel,pins =
|
|
<AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
pinctrl_adc0_ad4: adc0_ad4 {
|
|
atmel,pins =
|
|
<AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
};
|
|
|
|
dbgu {
|
|
pinctrl_dbgu: dbgu-0 {
|
|
atmel,pins =
|
|
<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* conflicts with D14 and TDI */
|
|
AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* conflicts with D15 and TDO */
|
|
};
|
|
};
|
|
|
|
ebi {
|
|
pinctrl_ebi_addr: ebi-addr-0 {
|
|
atmel,pins =
|
|
<AT91_PIOE 0 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOE 1 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
|
|
pinctrl_ebi_nand_addr: ebi-addr-1 {
|
|
atmel,pins =
|
|
<AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
|
|
pinctrl_ebi_cs0: ebi-cs0-0 {
|
|
atmel,pins =
|
|
<AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
|
|
pinctrl_ebi_cs1: ebi-cs1-0 {
|
|
atmel,pins =
|
|
<AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
|
|
pinctrl_ebi_cs2: ebi-cs2-0 {
|
|
atmel,pins =
|
|
<AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
|
|
pinctrl_ebi_cs3: ebi-cs3-0 {
|
|
atmel,pins =
|
|
<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
|
|
pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
|
|
atmel,pins =
|
|
<AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
|
|
pinctrl_ebi_data_8_15: ebi-data-msb-0 {
|
|
atmel,pins =
|
|
<AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE
|
|
AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE
|
|
AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE
|
|
AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE
|
|
AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE
|
|
AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE
|
|
AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE
|
|
AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;
|
|
};
|
|
|
|
pinctrl_ebi_nandrdy: ebi-nandrdy-0 {
|
|
atmel,pins =
|
|
<AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
|
|
pinctrl_ebi_nrd_nandoe: ebi-nrd-nandoe-0 {
|
|
atmel,pins =
|
|
<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
|
|
pinctrl_ebi_nwait: ebi-nwait-0 {
|
|
atmel,pins =
|
|
<AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
|
|
pinctrl_ebi_nwe_nandwe: ebi-nwe-nandwe-0 {
|
|
atmel,pins =
|
|
<AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
|
|
pinctrl_ebi_nwr1_nbs1: ebi-nwr1-nbs1-0 {
|
|
atmel,pins =
|
|
<AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
};
|
|
|
|
i2c0 {
|
|
pinctrl_i2c0: i2c0-0 {
|
|
atmel,pins =
|
|
<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
|
|
pinctrl_i2c0_gpio: i2c0-gpio {
|
|
atmel,pins =
|
|
<AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
|
|
AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
|
|
};
|
|
};
|
|
|
|
i2c1 {
|
|
pinctrl_i2c1: i2c1-0 {
|
|
atmel,pins =
|
|
<AT91_PIOE 29 AT91_PERIPH_C AT91_PINCTRL_NONE /* TWD1, conflicts with UART0 RX and DIBP */
|
|
AT91_PIOE 30 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* TWCK1, conflicts with UART0 TX and DIBN */
|
|
};
|
|
|
|
pinctrl_i2c1_gpio: i2c1-gpio {
|
|
atmel,pins =
|
|
<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
|
|
AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
|
|
};
|
|
};
|
|
|
|
i2c2 {
|
|
pinctrl_i2c2: i2c2-0 {
|
|
atmel,pins =
|
|
<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* TWD2, conflicts with RD0 and PWML1 */
|
|
AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* TWCK2, conflicts with RF0 */
|
|
};
|
|
|
|
pinctrl_i2c2_gpio: i2c2-gpio {
|
|
atmel,pins =
|
|
<AT91_PIOB 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
|
|
AT91_PIOB 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
|
|
};
|
|
};
|
|
|
|
isi {
|
|
pinctrl_isi_data_0_7: isi-0-data-0-7 {
|
|
atmel,pins =
|
|
<AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D0 */
|
|
AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D1 */
|
|
AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D2 */
|
|
AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D3 */
|
|
AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D4 */
|
|
AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D5 */
|
|
AT91_PIOC 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D6 */
|
|
AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D7 */
|
|
AT91_PIOB 1 AT91_PERIPH_C AT91_PINCTRL_NONE /* ISI_PCK, conflict with G0_RXCK */
|
|
AT91_PIOB 3 AT91_PERIPH_C AT91_PINCTRL_NONE /* ISI_VSYNC */
|
|
AT91_PIOB 4 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_HSYNC */
|
|
};
|
|
pinctrl_isi_data_8_9: isi-0-data-8-9 {
|
|
atmel,pins =
|
|
<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE /* ISI_D8, conflicts with SPI0_MISO, PWMH2 */
|
|
AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_D9, conflicts with SPI0_MOSI, PWML2 */
|
|
};
|
|
pinctrl_isi_data_10_11: isi-0-data-10-11 {
|
|
atmel,pins =
|
|
<AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE /* ISI_D10, conflicts with SPI0_SPCK, PWMH3 */
|
|
AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_D11, conflicts with SPI0_NPCS0, PWML3 */
|
|
};
|
|
};
|
|
|
|
lcd {
|
|
pinctrl_lcd_base: lcd-base-0 {
|
|
atmel,pins =
|
|
<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDVSYNC */
|
|
AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDHSYNC */
|
|
AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDEN */
|
|
AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPCK */
|
|
};
|
|
pinctrl_lcd_pwm: lcd-pwm-0 {
|
|
atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPWM */
|
|
};
|
|
pinctrl_lcd_rgb444: lcd-rgb-0 {
|
|
atmel,pins =
|
|
<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
|
|
AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
|
|
AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
|
|
AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
|
|
AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
|
|
AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
|
|
AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
|
|
AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
|
|
AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
|
|
AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
|
|
AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
|
|
AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD11 pin */
|
|
};
|
|
pinctrl_lcd_rgb565: lcd-rgb-1 {
|
|
atmel,pins =
|
|
<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
|
|
AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
|
|
AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
|
|
AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
|
|
AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
|
|
AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
|
|
AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
|
|
AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
|
|
AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
|
|
AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
|
|
AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
|
|
AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
|
|
AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
|
|
AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
|
|
AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
|
|
AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD15 pin */
|
|
};
|
|
pinctrl_lcd_rgb666: lcd-rgb-2 {
|
|
atmel,pins =
|
|
<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
|
|
AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
|
|
AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
|
|
AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
|
|
AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
|
|
AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
|
|
AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
|
|
AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
|
|
AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
|
|
AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
|
|
AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
|
|
AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */
|
|
AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */
|
|
AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */
|
|
AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */
|
|
AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */
|
|
AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */
|
|
AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */
|
|
};
|
|
pinctrl_lcd_rgb777: lcd-rgb-3 {
|
|
atmel,pins =
|
|
/* LCDDAT0 conflicts with TMS */
|
|
<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
|
|
AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
|
|
AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
|
|
AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
|
|
AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
|
|
AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
|
|
AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
|
|
/* LCDDAT8 conflicts with TCK */
|
|
AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
|
|
AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
|
|
AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
|
|
AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
|
|
AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
|
|
AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
|
|
AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */
|
|
/* LCDDAT16 conflicts with NTRST */
|
|
AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD17 pin */
|
|
AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */
|
|
AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */
|
|
AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */
|
|
AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */
|
|
AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */
|
|
AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */
|
|
};
|
|
pinctrl_lcd_rgb888: lcd-rgb-4 {
|
|
atmel,pins =
|
|
<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
|
|
AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
|
|
AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
|
|
AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
|
|
AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
|
|
AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
|
|
AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
|
|
AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
|
|
AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
|
|
AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
|
|
AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
|
|
AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
|
|
AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
|
|
AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
|
|
AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
|
|
AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */
|
|
AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */
|
|
AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD17 pin */
|
|
AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */
|
|
AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */
|
|
AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */
|
|
AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */
|
|
AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */
|
|
AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */
|
|
};
|
|
};
|
|
|
|
macb0 {
|
|
pinctrl_macb0_rmii: macb0_rmii-0 {
|
|
atmel,pins =
|
|
<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_TX0 */
|
|
AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_TX1 */
|
|
AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_RX0 */
|
|
AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_RX1 */
|
|
AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_RXDV */
|
|
AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_RXER */
|
|
AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_TXEN */
|
|
AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_TXCK */
|
|
AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_MDC */
|
|
AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_MDIO */
|
|
>;
|
|
};
|
|
};
|
|
|
|
macb1 {
|
|
pinctrl_macb1_rmii: macb1_rmii-0 {
|
|
atmel,pins =
|
|
<AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TX0 */
|
|
AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TX1 */
|
|
AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RX0 */
|
|
AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RX1 */
|
|
AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RXDV */
|
|
AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RXER */
|
|
AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TXEN */
|
|
AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TXCK */
|
|
AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_MDC */
|
|
AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_MDIO */
|
|
>;
|
|
};
|
|
};
|
|
|
|
mmc0 {
|
|
pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
|
|
atmel,pins =
|
|
<AT91_PIOC 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* MCI0_CK, conflict with PCK1(ISI_MCK) */
|
|
AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_CDA, conflict with NAND_D0 */
|
|
AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA0, conflict with NAND_D1 */
|
|
>;
|
|
};
|
|
pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
|
|
atmel,pins =
|
|
<AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA1, conflict with NAND_D2 */
|
|
AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA2, conflict with NAND_D3 */
|
|
AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA3, conflict with NAND_D4 */
|
|
>;
|
|
};
|
|
pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
|
|
atmel,pins =
|
|
<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA4, conflict with NAND_D5 */
|
|
AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA5, conflict with NAND_D6 */
|
|
AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA6, conflict with NAND_D7 */
|
|
AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA7, conflict with NAND_OE */
|
|
>;
|
|
};
|
|
};
|
|
|
|
mmc1 {
|
|
pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 {
|
|
atmel,pins =
|
|
<AT91_PIOE 18 AT91_PERIPH_C AT91_PINCTRL_NONE /* MCI1_CK */
|
|
AT91_PIOE 19 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* MCI1_CDA */
|
|
AT91_PIOE 20 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* MCI1_DA0 */
|
|
>;
|
|
};
|
|
pinctrl_mmc1_dat1_3: mmc1_dat1_3 {
|
|
atmel,pins =
|
|
<AT91_PIOE 21 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* MCI1_DA1 */
|
|
AT91_PIOE 22 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* MCI1_DA2 */
|
|
AT91_PIOE 23 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* MCI1_DA3 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
nand0 {
|
|
pinctrl_nand: nand-0 {
|
|
atmel,pins =
|
|
<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC13 periph A Read Enable */
|
|
AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC14 periph A Write Enable */
|
|
|
|
AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC17 ALE */
|
|
AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC18 CLE */
|
|
|
|
AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC15 NCS3/Chip Enable */
|
|
AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC16 NANDRDY */
|
|
AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC5 Data bit 0 */
|
|
AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC6 Data bit 1 */
|
|
AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC7 Data bit 2 */
|
|
AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC8 Data bit 3 */
|
|
AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC9 Data bit 4 */
|
|
AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC10 Data bit 5 */
|
|
AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC11 periph A Data bit 6 */
|
|
AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC12 periph A Data bit 7 */
|
|
};
|
|
};
|
|
|
|
spi0 {
|
|
pinctrl_spi0: spi0-0 {
|
|
atmel,pins =
|
|
<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI0_MISO */
|
|
AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI0_MOSI */
|
|
AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI0_SPCK */
|
|
>;
|
|
};
|
|
};
|
|
|
|
ssc0 {
|
|
pinctrl_ssc0_tx: ssc0_tx {
|
|
atmel,pins =
|
|
<AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* TK0 */
|
|
AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE /* TF0 */
|
|
AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TD0 */
|
|
};
|
|
|
|
pinctrl_ssc0_rx: ssc0_rx {
|
|
atmel,pins =
|
|
<AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* RK0 */
|
|
AT91_PIOB 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* RF0 */
|
|
AT91_PIOB 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* RD0 */
|
|
};
|
|
};
|
|
|
|
ssc1 {
|
|
pinctrl_ssc1_tx: ssc1_tx {
|
|
atmel,pins =
|
|
<AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* TK1 */
|
|
AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* TF1 */
|
|
AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TD1 */
|
|
};
|
|
|
|
pinctrl_ssc1_rx: ssc1_rx {
|
|
atmel,pins =
|
|
<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* RK1 */
|
|
AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* RF1 */
|
|
AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* RD1 */
|
|
};
|
|
};
|
|
|
|
spi1 {
|
|
pinctrl_spi1: spi1-0 {
|
|
atmel,pins =
|
|
<AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI1_MISO */
|
|
AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI1_MOSI */
|
|
AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI1_SPCK */
|
|
>;
|
|
};
|
|
};
|
|
|
|
spi2 {
|
|
pinctrl_spi2: spi2-0 {
|
|
atmel,pins =
|
|
<AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* SPI2_MISO conflicts with RTS0 */
|
|
AT91_PIOD 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* SPI2_MOSI conflicts with TXD0 */
|
|
AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE /* SPI2_SPCK conflicts with RTS1 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
uart0 {
|
|
pinctrl_uart0: uart0-0 {
|
|
atmel,pins =
|
|
<AT91_PIOE 29 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* RXD */
|
|
AT91_PIOE 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* TXD */
|
|
>;
|
|
};
|
|
};
|
|
|
|
uart1 {
|
|
pinctrl_uart1: uart1-0 {
|
|
atmel,pins =
|
|
<AT91_PIOC 25 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* RXD */
|
|
AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_NONE /* TXD */
|
|
>;
|
|
};
|
|
};
|
|
|
|
usart0 {
|
|
pinctrl_usart0: usart0-0 {
|
|
atmel,pins =
|
|
<AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* RXD */
|
|
AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* TXD */
|
|
>;
|
|
};
|
|
pinctrl_usart0_rts: usart0_rts-0 {
|
|
atmel,pins = <AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
pinctrl_usart0_cts: usart0_cts-0 {
|
|
atmel,pins = <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
};
|
|
|
|
usart1 {
|
|
pinctrl_usart1: usart1-0 {
|
|
atmel,pins =
|
|
<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* RXD */
|
|
AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* TXD */
|
|
>;
|
|
};
|
|
pinctrl_usart1_rts: usart1_rts-0 {
|
|
atmel,pins = <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
pinctrl_usart1_cts: usart1_cts-0 {
|
|
atmel,pins = <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
};
|
|
|
|
usart2 {
|
|
pinctrl_usart2: usart2-0 {
|
|
atmel,pins =
|
|
<AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* RXD - conflicts with G0_CRS, ISI_HSYNC */
|
|
AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE /* TXD - conflicts with G0_COL, PCK2 */
|
|
>;
|
|
};
|
|
pinctrl_usart2_rts: usart2_rts-0 {
|
|
atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with G0_RX3, PWMH1 */
|
|
};
|
|
pinctrl_usart2_cts: usart2_cts-0 {
|
|
atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with G0_TXER, ISI_VSYNC */
|
|
};
|
|
};
|
|
|
|
usart3 {
|
|
pinctrl_usart3: usart3-0 {
|
|
atmel,pins =
|
|
<AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* RXD */
|
|
AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_NONE /* TXD */
|
|
>;
|
|
};
|
|
};
|
|
|
|
usart4 {
|
|
pinctrl_usart4: usart4-0 {
|
|
atmel,pins =
|
|
<AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* RXD */
|
|
AT91_PIOE 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* TXD */
|
|
>;
|
|
};
|
|
pinctrl_usart4_rts: usart4_rts-0 {
|
|
atmel,pins = <AT91_PIOE 28 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with NWAIT, A19 */
|
|
};
|
|
pinctrl_usart4_cts: usart4_cts-0 {
|
|
atmel,pins = <AT91_PIOE 0 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with A0/NBS0, MCI0_CDB */
|
|
};
|
|
};
|
|
};
|
|
|
|
aic: interrupt-controller@fc06e000 {
|
|
#interrupt-cells = <3>;
|
|
compatible = "atmel,sama5d4-aic";
|
|
interrupt-controller;
|
|
reg = <0xfc06e000 0x200>;
|
|
atmel,external-irqs = <56>;
|
|
};
|
|
};
|
|
};
|
|
};
|