linux/drivers/net/ethernet/intel/igc/igc_base.c
Sasha Neftin 7241069f7a igc: Remove unused phy_type enum
Complete to commit 8e153faf58 ("igc: Remove unused phy type")
i225 parts have only one PHY. There is no point to use phy_type enum.
Clean up the code accordingly, and get rid of the unused enum lines.

Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-05-10 14:02:40 -07:00

420 lines
10 KiB
C

// SPDX-License-Identifier: GPL-2.0
/* Copyright (c) 2018 Intel Corporation */
#include <linux/delay.h>
#include "igc_hw.h"
#include "igc_i225.h"
#include "igc_mac.h"
#include "igc_base.h"
#include "igc.h"
/**
* igc_reset_hw_base - Reset hardware
* @hw: pointer to the HW structure
*
* This resets the hardware into a known state. This is a
* function pointer entry point called by the api module.
*/
static s32 igc_reset_hw_base(struct igc_hw *hw)
{
s32 ret_val;
u32 ctrl;
/* Prevent the PCI-E bus from sticking if there is no TLP connection
* on the last TLP read/write transaction when MAC is reset.
*/
ret_val = igc_disable_pcie_master(hw);
if (ret_val)
hw_dbg("PCI-E Master disable polling has failed\n");
hw_dbg("Masking off all interrupts\n");
wr32(IGC_IMC, 0xffffffff);
wr32(IGC_RCTL, 0);
wr32(IGC_TCTL, IGC_TCTL_PSP);
wrfl();
usleep_range(10000, 20000);
ctrl = rd32(IGC_CTRL);
hw_dbg("Issuing a global reset to MAC\n");
wr32(IGC_CTRL, ctrl | IGC_CTRL_RST);
ret_val = igc_get_auto_rd_done(hw);
if (ret_val) {
/* When auto config read does not complete, do not
* return with an error. This can happen in situations
* where there is no eeprom and prevents getting link.
*/
hw_dbg("Auto Read Done did not complete\n");
}
/* Clear any pending interrupt events. */
wr32(IGC_IMC, 0xffffffff);
rd32(IGC_ICR);
return ret_val;
}
/**
* igc_init_nvm_params_base - Init NVM func ptrs.
* @hw: pointer to the HW structure
*/
static s32 igc_init_nvm_params_base(struct igc_hw *hw)
{
struct igc_nvm_info *nvm = &hw->nvm;
u32 eecd = rd32(IGC_EECD);
u16 size;
size = (u16)((eecd & IGC_EECD_SIZE_EX_MASK) >>
IGC_EECD_SIZE_EX_SHIFT);
/* Added to a constant, "size" becomes the left-shift value
* for setting word_size.
*/
size += NVM_WORD_SIZE_BASE_SHIFT;
/* Just in case size is out of range, cap it to the largest
* EEPROM size supported
*/
if (size > 15)
size = 15;
nvm->type = igc_nvm_eeprom_spi;
nvm->word_size = BIT(size);
nvm->opcode_bits = 8;
nvm->delay_usec = 1;
nvm->page_size = eecd & IGC_EECD_ADDR_BITS ? 32 : 8;
nvm->address_bits = eecd & IGC_EECD_ADDR_BITS ?
16 : 8;
if (nvm->word_size == BIT(15))
nvm->page_size = 128;
return 0;
}
/**
* igc_setup_copper_link_base - Configure copper link settings
* @hw: pointer to the HW structure
*
* Configures the link for auto-neg or forced speed and duplex. Then we check
* for link, once link is established calls to configure collision distance
* and flow control are called.
*/
static s32 igc_setup_copper_link_base(struct igc_hw *hw)
{
s32 ret_val = 0;
u32 ctrl;
ctrl = rd32(IGC_CTRL);
ctrl |= IGC_CTRL_SLU;
ctrl &= ~(IGC_CTRL_FRCSPD | IGC_CTRL_FRCDPX);
wr32(IGC_CTRL, ctrl);
ret_val = igc_setup_copper_link(hw);
return ret_val;
}
/**
* igc_init_mac_params_base - Init MAC func ptrs.
* @hw: pointer to the HW structure
*/
static s32 igc_init_mac_params_base(struct igc_hw *hw)
{
struct igc_dev_spec_base *dev_spec = &hw->dev_spec._base;
struct igc_mac_info *mac = &hw->mac;
/* Set mta register count */
mac->mta_reg_count = 128;
mac->rar_entry_count = IGC_RAR_ENTRIES;
/* reset */
mac->ops.reset_hw = igc_reset_hw_base;
mac->ops.acquire_swfw_sync = igc_acquire_swfw_sync_i225;
mac->ops.release_swfw_sync = igc_release_swfw_sync_i225;
/* Allow a single clear of the SW semaphore on I225 */
if (mac->type == igc_i225)
dev_spec->clear_semaphore_once = true;
/* physical interface link setup */
mac->ops.setup_physical_interface = igc_setup_copper_link_base;
return 0;
}
/**
* igc_init_phy_params_base - Init PHY func ptrs.
* @hw: pointer to the HW structure
*/
static s32 igc_init_phy_params_base(struct igc_hw *hw)
{
struct igc_phy_info *phy = &hw->phy;
s32 ret_val = 0;
phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT_2500;
phy->reset_delay_us = 100;
/* set lan id */
hw->bus.func = (rd32(IGC_STATUS) & IGC_STATUS_FUNC_MASK) >>
IGC_STATUS_FUNC_SHIFT;
/* Make sure the PHY is in a good state. Several people have reported
* firmware leaving the PHY's page select register set to something
* other than the default of zero, which causes the PHY ID read to
* access something other than the intended register.
*/
ret_val = hw->phy.ops.reset(hw);
if (ret_val) {
hw_dbg("Error resetting the PHY\n");
goto out;
}
ret_val = igc_get_phy_id(hw);
if (ret_val)
return ret_val;
igc_check_for_copper_link(hw);
out:
return ret_val;
}
static s32 igc_get_invariants_base(struct igc_hw *hw)
{
struct igc_mac_info *mac = &hw->mac;
s32 ret_val = 0;
switch (hw->device_id) {
case IGC_DEV_ID_I225_LM:
case IGC_DEV_ID_I225_V:
case IGC_DEV_ID_I225_I:
case IGC_DEV_ID_I220_V:
case IGC_DEV_ID_I225_K:
case IGC_DEV_ID_I225_K2:
case IGC_DEV_ID_I226_K:
case IGC_DEV_ID_I225_LMVP:
case IGC_DEV_ID_I226_LMVP:
case IGC_DEV_ID_I225_IT:
case IGC_DEV_ID_I226_LM:
case IGC_DEV_ID_I226_V:
case IGC_DEV_ID_I226_IT:
case IGC_DEV_ID_I221_V:
case IGC_DEV_ID_I226_BLANK_NVM:
case IGC_DEV_ID_I225_BLANK_NVM:
mac->type = igc_i225;
break;
default:
return -IGC_ERR_MAC_INIT;
}
hw->phy.media_type = igc_media_type_copper;
/* mac initialization and operations */
ret_val = igc_init_mac_params_base(hw);
if (ret_val)
goto out;
/* NVM initialization */
ret_val = igc_init_nvm_params_base(hw);
switch (hw->mac.type) {
case igc_i225:
ret_val = igc_init_nvm_params_i225(hw);
break;
default:
break;
}
/* setup PHY parameters */
ret_val = igc_init_phy_params_base(hw);
if (ret_val)
goto out;
out:
return ret_val;
}
/**
* igc_acquire_phy_base - Acquire rights to access PHY
* @hw: pointer to the HW structure
*
* Acquire access rights to the correct PHY. This is a
* function pointer entry point called by the api module.
*/
static s32 igc_acquire_phy_base(struct igc_hw *hw)
{
u16 mask = IGC_SWFW_PHY0_SM;
return hw->mac.ops.acquire_swfw_sync(hw, mask);
}
/**
* igc_release_phy_base - Release rights to access PHY
* @hw: pointer to the HW structure
*
* A wrapper to release access rights to the correct PHY. This is a
* function pointer entry point called by the api module.
*/
static void igc_release_phy_base(struct igc_hw *hw)
{
u16 mask = IGC_SWFW_PHY0_SM;
hw->mac.ops.release_swfw_sync(hw, mask);
}
/**
* igc_init_hw_base - Initialize hardware
* @hw: pointer to the HW structure
*
* This inits the hardware readying it for operation.
*/
static s32 igc_init_hw_base(struct igc_hw *hw)
{
struct igc_mac_info *mac = &hw->mac;
u16 i, rar_count = mac->rar_entry_count;
s32 ret_val = 0;
/* Setup the receive address */
igc_init_rx_addrs(hw, rar_count);
/* Zero out the Multicast HASH table */
hw_dbg("Zeroing the MTA\n");
for (i = 0; i < mac->mta_reg_count; i++)
array_wr32(IGC_MTA, i, 0);
/* Zero out the Unicast HASH table */
hw_dbg("Zeroing the UTA\n");
for (i = 0; i < mac->uta_reg_count; i++)
array_wr32(IGC_UTA, i, 0);
/* Setup link and flow control */
ret_val = igc_setup_link(hw);
/* Clear all of the statistics registers (clear on read). It is
* important that we do this after we have tried to establish link
* because the symbol error count will increment wildly if there
* is no link.
*/
igc_clear_hw_cntrs_base(hw);
return ret_val;
}
/**
* igc_power_down_phy_copper_base - Remove link during PHY power down
* @hw: pointer to the HW structure
*
* In the case of a PHY power down to save power, or to turn off link during a
* driver unload, or wake on lan is not enabled, remove the link.
*/
void igc_power_down_phy_copper_base(struct igc_hw *hw)
{
/* If the management interface is not enabled, then power down */
if (!(igc_enable_mng_pass_thru(hw) || igc_check_reset_block(hw)))
igc_power_down_phy_copper(hw);
}
/**
* igc_rx_fifo_flush_base - Clean rx fifo after Rx enable
* @hw: pointer to the HW structure
*
* After Rx enable, if manageability is enabled then there is likely some
* bad data at the start of the fifo and possibly in the DMA fifo. This
* function clears the fifos and flushes any packets that came in as rx was
* being enabled.
*/
void igc_rx_fifo_flush_base(struct igc_hw *hw)
{
u32 rctl, rlpml, rxdctl[4], rfctl, temp_rctl, rx_enabled;
int i, ms_wait;
/* disable IPv6 options as per hardware errata */
rfctl = rd32(IGC_RFCTL);
rfctl |= IGC_RFCTL_IPV6_EX_DIS;
wr32(IGC_RFCTL, rfctl);
if (!(rd32(IGC_MANC) & IGC_MANC_RCV_TCO_EN))
return;
/* Disable all Rx queues */
for (i = 0; i < 4; i++) {
rxdctl[i] = rd32(IGC_RXDCTL(i));
wr32(IGC_RXDCTL(i),
rxdctl[i] & ~IGC_RXDCTL_QUEUE_ENABLE);
}
/* Poll all queues to verify they have shut down */
for (ms_wait = 0; ms_wait < 10; ms_wait++) {
usleep_range(1000, 2000);
rx_enabled = 0;
for (i = 0; i < 4; i++)
rx_enabled |= rd32(IGC_RXDCTL(i));
if (!(rx_enabled & IGC_RXDCTL_QUEUE_ENABLE))
break;
}
if (ms_wait == 10)
hw_dbg("Queue disable timed out after 10ms\n");
/* Clear RLPML, RCTL.SBP, RFCTL.LEF, and set RCTL.LPE so that all
* incoming packets are rejected. Set enable and wait 2ms so that
* any packet that was coming in as RCTL.EN was set is flushed
*/
wr32(IGC_RFCTL, rfctl & ~IGC_RFCTL_LEF);
rlpml = rd32(IGC_RLPML);
wr32(IGC_RLPML, 0);
rctl = rd32(IGC_RCTL);
temp_rctl = rctl & ~(IGC_RCTL_EN | IGC_RCTL_SBP);
temp_rctl |= IGC_RCTL_LPE;
wr32(IGC_RCTL, temp_rctl);
wr32(IGC_RCTL, temp_rctl | IGC_RCTL_EN);
wrfl();
usleep_range(2000, 3000);
/* Enable Rx queues that were previously enabled and restore our
* previous state
*/
for (i = 0; i < 4; i++)
wr32(IGC_RXDCTL(i), rxdctl[i]);
wr32(IGC_RCTL, rctl);
wrfl();
wr32(IGC_RLPML, rlpml);
wr32(IGC_RFCTL, rfctl);
/* Flush receive errors generated by workaround */
rd32(IGC_ROC);
rd32(IGC_RNBC);
rd32(IGC_MPC);
}
static struct igc_mac_operations igc_mac_ops_base = {
.init_hw = igc_init_hw_base,
.check_for_link = igc_check_for_copper_link,
.rar_set = igc_rar_set,
.read_mac_addr = igc_read_mac_addr,
.get_speed_and_duplex = igc_get_speed_and_duplex_copper,
};
static const struct igc_phy_operations igc_phy_ops_base = {
.acquire = igc_acquire_phy_base,
.release = igc_release_phy_base,
.reset = igc_phy_hw_reset,
.read_reg = igc_read_phy_reg_gpy,
.write_reg = igc_write_phy_reg_gpy,
};
const struct igc_info igc_base_info = {
.get_invariants = igc_get_invariants_base,
.mac_ops = &igc_mac_ops_base,
.phy_ops = &igc_phy_ops_base,
};