mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-27 14:14:24 +08:00
b888f50586
Fix the 'make W=1" issue: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/leds/blink/leds-bcm63138.o Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240517-md-leds-bcm63138-v1-1-247b7302edb6@quicinc.com Signed-off-by: Lee Jones <lee@kernel.org>
309 lines
7.9 KiB
C
309 lines
7.9 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
|
|
*/
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#define BCM63138_MAX_LEDS 32
|
|
#define BCM63138_MAX_BRIGHTNESS 9
|
|
|
|
#define BCM63138_LED_BITS 4 /* how many bits control a single LED */
|
|
#define BCM63138_LED_MASK ((1 << BCM63138_LED_BITS) - 1) /* 0xf */
|
|
#define BCM63138_LEDS_PER_REG (32 / BCM63138_LED_BITS) /* 8 */
|
|
|
|
#define BCM63138_GLB_CTRL 0x00
|
|
#define BCM63138_GLB_CTRL_SERIAL_LED_DATA_PPOL 0x00000002
|
|
#define BCM63138_GLB_CTRL_SERIAL_LED_EN_POL 0x00000008
|
|
#define BCM63138_MASK 0x04
|
|
#define BCM63138_HW_LED_EN 0x08
|
|
#define BCM63138_SERIAL_LED_SHIFT_SEL 0x0c
|
|
#define BCM63138_FLASH_RATE_CTRL1 0x10
|
|
#define BCM63138_FLASH_RATE_CTRL2 0x14
|
|
#define BCM63138_FLASH_RATE_CTRL3 0x18
|
|
#define BCM63138_FLASH_RATE_CTRL4 0x1c
|
|
#define BCM63138_BRIGHT_CTRL1 0x20
|
|
#define BCM63138_BRIGHT_CTRL2 0x24
|
|
#define BCM63138_BRIGHT_CTRL3 0x28
|
|
#define BCM63138_BRIGHT_CTRL4 0x2c
|
|
#define BCM63138_POWER_LED_CFG 0x30
|
|
#define BCM63138_HW_POLARITY 0xb4
|
|
#define BCM63138_SW_DATA 0xb8
|
|
#define BCM63138_SW_POLARITY 0xbc
|
|
#define BCM63138_PARALLEL_LED_POLARITY 0xc0
|
|
#define BCM63138_SERIAL_LED_POLARITY 0xc4
|
|
#define BCM63138_HW_LED_STATUS 0xc8
|
|
#define BCM63138_FLASH_CTRL_STATUS 0xcc
|
|
#define BCM63138_FLASH_BRT_CTRL 0xd0
|
|
#define BCM63138_FLASH_P_LED_OUT_STATUS 0xd4
|
|
#define BCM63138_FLASH_S_LED_OUT_STATUS 0xd8
|
|
|
|
struct bcm63138_leds {
|
|
struct device *dev;
|
|
void __iomem *base;
|
|
spinlock_t lock;
|
|
};
|
|
|
|
struct bcm63138_led {
|
|
struct bcm63138_leds *leds;
|
|
struct led_classdev cdev;
|
|
u32 pin;
|
|
bool active_low;
|
|
};
|
|
|
|
/*
|
|
* I/O access
|
|
*/
|
|
|
|
static void bcm63138_leds_write(struct bcm63138_leds *leds, unsigned int reg,
|
|
u32 data)
|
|
{
|
|
writel(data, leds->base + reg);
|
|
}
|
|
|
|
static unsigned long bcm63138_leds_read(struct bcm63138_leds *leds,
|
|
unsigned int reg)
|
|
{
|
|
return readl(leds->base + reg);
|
|
}
|
|
|
|
static void bcm63138_leds_update_bits(struct bcm63138_leds *leds,
|
|
unsigned int reg, u32 mask, u32 val)
|
|
{
|
|
WARN_ON(val & ~mask);
|
|
|
|
bcm63138_leds_write(leds, reg, (bcm63138_leds_read(leds, reg) & ~mask) | (val & mask));
|
|
}
|
|
|
|
/*
|
|
* Helpers
|
|
*/
|
|
|
|
static void bcm63138_leds_set_flash_rate(struct bcm63138_leds *leds,
|
|
struct bcm63138_led *led,
|
|
u8 value)
|
|
{
|
|
int reg_offset = (led->pin >> fls((BCM63138_LEDS_PER_REG - 1))) * 4;
|
|
int shift = (led->pin & (BCM63138_LEDS_PER_REG - 1)) * BCM63138_LED_BITS;
|
|
|
|
bcm63138_leds_update_bits(leds, BCM63138_FLASH_RATE_CTRL1 + reg_offset,
|
|
BCM63138_LED_MASK << shift, value << shift);
|
|
}
|
|
|
|
static void bcm63138_leds_set_bright(struct bcm63138_leds *leds,
|
|
struct bcm63138_led *led,
|
|
u8 value)
|
|
{
|
|
int reg_offset = (led->pin >> fls((BCM63138_LEDS_PER_REG - 1))) * 4;
|
|
int shift = (led->pin & (BCM63138_LEDS_PER_REG - 1)) * BCM63138_LED_BITS;
|
|
|
|
bcm63138_leds_update_bits(leds, BCM63138_BRIGHT_CTRL1 + reg_offset,
|
|
BCM63138_LED_MASK << shift, value << shift);
|
|
}
|
|
|
|
static void bcm63138_leds_enable_led(struct bcm63138_leds *leds,
|
|
struct bcm63138_led *led,
|
|
enum led_brightness value)
|
|
{
|
|
u32 bit = BIT(led->pin);
|
|
|
|
bcm63138_leds_update_bits(leds, BCM63138_SW_DATA, bit, value ? bit : 0);
|
|
}
|
|
|
|
/*
|
|
* API callbacks
|
|
*/
|
|
|
|
static void bcm63138_leds_brightness_set(struct led_classdev *led_cdev,
|
|
enum led_brightness value)
|
|
{
|
|
struct bcm63138_led *led = container_of(led_cdev, struct bcm63138_led, cdev);
|
|
struct bcm63138_leds *leds = led->leds;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&leds->lock, flags);
|
|
|
|
bcm63138_leds_enable_led(leds, led, value);
|
|
if (!value)
|
|
bcm63138_leds_set_flash_rate(leds, led, 0);
|
|
else
|
|
bcm63138_leds_set_bright(leds, led, value);
|
|
|
|
spin_unlock_irqrestore(&leds->lock, flags);
|
|
}
|
|
|
|
static int bcm63138_leds_blink_set(struct led_classdev *led_cdev,
|
|
unsigned long *delay_on,
|
|
unsigned long *delay_off)
|
|
{
|
|
struct bcm63138_led *led = container_of(led_cdev, struct bcm63138_led, cdev);
|
|
struct bcm63138_leds *leds = led->leds;
|
|
unsigned long flags;
|
|
u8 value;
|
|
|
|
if (!*delay_on && !*delay_off) {
|
|
*delay_on = 640;
|
|
*delay_off = 640;
|
|
}
|
|
|
|
if (*delay_on != *delay_off) {
|
|
dev_dbg(led_cdev->dev, "Blinking at unequal delays is not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (*delay_on) {
|
|
case 1152 ... 1408: /* 1280 ms ± 10% */
|
|
value = 0x7;
|
|
break;
|
|
case 576 ... 704: /* 640 ms ± 10% */
|
|
value = 0x6;
|
|
break;
|
|
case 288 ... 352: /* 320 ms ± 10% */
|
|
value = 0x5;
|
|
break;
|
|
case 126 ... 154: /* 140 ms ± 10% */
|
|
value = 0x4;
|
|
break;
|
|
case 59 ... 72: /* 65 ms ± 10% */
|
|
value = 0x3;
|
|
break;
|
|
default:
|
|
dev_dbg(led_cdev->dev, "Blinking delay value %lu is unsupported\n",
|
|
*delay_on);
|
|
return -EINVAL;
|
|
}
|
|
|
|
spin_lock_irqsave(&leds->lock, flags);
|
|
|
|
bcm63138_leds_enable_led(leds, led, BCM63138_MAX_BRIGHTNESS);
|
|
bcm63138_leds_set_flash_rate(leds, led, value);
|
|
|
|
spin_unlock_irqrestore(&leds->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* LED driver
|
|
*/
|
|
|
|
static void bcm63138_leds_create_led(struct bcm63138_leds *leds,
|
|
struct device_node *np)
|
|
{
|
|
struct led_init_data init_data = {
|
|
.fwnode = of_fwnode_handle(np),
|
|
};
|
|
struct device *dev = leds->dev;
|
|
struct bcm63138_led *led;
|
|
struct pinctrl *pinctrl;
|
|
u32 bit;
|
|
int err;
|
|
|
|
led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
|
|
if (!led) {
|
|
dev_err(dev, "Failed to alloc LED\n");
|
|
return;
|
|
}
|
|
|
|
led->leds = leds;
|
|
|
|
if (of_property_read_u32(np, "reg", &led->pin)) {
|
|
dev_err(dev, "Missing \"reg\" property in %pOF\n", np);
|
|
goto err_free;
|
|
}
|
|
|
|
if (led->pin >= BCM63138_MAX_LEDS) {
|
|
dev_err(dev, "Invalid \"reg\" value %d\n", led->pin);
|
|
goto err_free;
|
|
}
|
|
|
|
led->active_low = of_property_read_bool(np, "active-low");
|
|
|
|
led->cdev.max_brightness = BCM63138_MAX_BRIGHTNESS;
|
|
led->cdev.brightness_set = bcm63138_leds_brightness_set;
|
|
led->cdev.blink_set = bcm63138_leds_blink_set;
|
|
|
|
err = devm_led_classdev_register_ext(dev, &led->cdev, &init_data);
|
|
if (err) {
|
|
dev_err(dev, "Failed to register LED %pOF: %d\n", np, err);
|
|
goto err_free;
|
|
}
|
|
|
|
pinctrl = devm_pinctrl_get_select_default(led->cdev.dev);
|
|
if (IS_ERR(pinctrl) && PTR_ERR(pinctrl) != -ENODEV) {
|
|
dev_warn(led->cdev.dev, "Failed to select %pOF pinctrl: %ld\n",
|
|
np, PTR_ERR(pinctrl));
|
|
}
|
|
|
|
bit = BIT(led->pin);
|
|
bcm63138_leds_update_bits(leds, BCM63138_PARALLEL_LED_POLARITY, bit,
|
|
led->active_low ? 0 : bit);
|
|
bcm63138_leds_update_bits(leds, BCM63138_HW_LED_EN, bit, 0);
|
|
bcm63138_leds_set_flash_rate(leds, led, 0);
|
|
bcm63138_leds_enable_led(leds, led, led->cdev.brightness);
|
|
|
|
return;
|
|
|
|
err_free:
|
|
devm_kfree(dev, led);
|
|
}
|
|
|
|
static int bcm63138_leds_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = dev_of_node(&pdev->dev);
|
|
struct device *dev = &pdev->dev;
|
|
struct bcm63138_leds *leds;
|
|
struct device_node *child;
|
|
|
|
leds = devm_kzalloc(dev, sizeof(*leds), GFP_KERNEL);
|
|
if (!leds)
|
|
return -ENOMEM;
|
|
|
|
leds->dev = dev;
|
|
|
|
leds->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(leds->base))
|
|
return PTR_ERR(leds->base);
|
|
|
|
spin_lock_init(&leds->lock);
|
|
|
|
bcm63138_leds_write(leds, BCM63138_GLB_CTRL,
|
|
BCM63138_GLB_CTRL_SERIAL_LED_DATA_PPOL |
|
|
BCM63138_GLB_CTRL_SERIAL_LED_EN_POL);
|
|
bcm63138_leds_write(leds, BCM63138_HW_LED_EN, 0);
|
|
bcm63138_leds_write(leds, BCM63138_SERIAL_LED_POLARITY, 0);
|
|
bcm63138_leds_write(leds, BCM63138_PARALLEL_LED_POLARITY, 0);
|
|
|
|
for_each_available_child_of_node(np, child) {
|
|
bcm63138_leds_create_led(leds, child);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id bcm63138_leds_of_match_table[] = {
|
|
{ .compatible = "brcm,bcm63138-leds", },
|
|
{ },
|
|
};
|
|
|
|
static struct platform_driver bcm63138_leds_driver = {
|
|
.probe = bcm63138_leds_probe,
|
|
.driver = {
|
|
.name = "leds-bcm63xxx",
|
|
.of_match_table = bcm63138_leds_of_match_table,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(bcm63138_leds_driver);
|
|
|
|
MODULE_AUTHOR("Rafał Miłecki");
|
|
MODULE_DESCRIPTION("Broadcom BCM63138 SoC LED driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(of, bcm63138_leds_of_match_table);
|