linux/tools/hv/hv_set_ifconfig.sh
Ani Sinha c3803203bc hv/hv_kvp_daemon: Some small fixes for handling NM keyfiles
Some small fixes:
 - lets make sure we are not adding ipv4 addresses in ipv6 section in
   keyfile and vice versa.
 - ADDR_FAMILY_IPV6 is a bit in addr_family. Test that bit instead of
   checking the whole value of addr_family.
 - Some trivial fixes in hv_set_ifconfig.sh.

These fixes are proposed after doing some internal testing at Red Hat.

CC: Shradha Gupta <shradhagupta@linux.microsoft.com>
CC: Saurabh Sengar <ssengar@linux.microsoft.com>
Fixes: 42999c9046 ("hv/hv_kvp_daemon:Support for keyfile based connection profile")
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Shradha Gupta <Shradhagupta@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20231016133122.2419537-1-anisinha@redhat.com>
2023-11-10 23:27:46 +00:00

93 lines
2.4 KiB
Bash
Executable File

#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# This example script activates an interface based on the specified
# configuration.
#
# In the interest of keeping the KVP daemon code free of distro specific
# information; the kvp daemon code invokes this external script to configure
# the interface.
#
# The only argument to this script is the configuration file that is to
# be used to configure the interface.
#
# Each Distro is expected to implement this script in a distro specific
# fashion. For instance, on Distros that ship with Network Manager enabled,
# this script can be based on the Network Manager APIs for configuring the
# interface.
#
# This example script is based on a RHEL environment.
#
# Here is the ifcfg format of the ip configuration file:
#
# HWADDR=macaddr
# DEVICE=interface name
# BOOTPROTO=<protocol> (where <protocol> is "dhcp" if DHCP is configured
# or "none" if no boot-time protocol should be used)
#
# IPADDR0=ipaddr1
# IPADDR1=ipaddr2
# IPADDRx=ipaddry (where y = x + 1)
#
# NETMASK0=netmask1
# NETMASKx=netmasky (where y = x + 1)
#
# GATEWAY=ipaddr1
# GATEWAYx=ipaddry (where y = x + 1)
#
# DNSx=ipaddrx (where first DNS address is tagged as DNS1 etc)
#
# IPV6 addresses will be tagged as IPV6ADDR, IPV6 gateway will be
# tagged as IPV6_DEFAULTGW and IPV6 NETMASK will be tagged as
# IPV6NETMASK.
#
# Here is the keyfile format of the ip configuration file:
#
# [ethernet]
# mac-address=macaddr
# [connection]
# interface-name=interface name
#
# [ipv4]
# method=<protocol> (where <protocol> is "auto" if DHCP is configured
# or "manual" if no boot-time protocol should be used)
#
# address1=ipaddr1/plen
# address2=ipaddr2/plen
#
# gateway=gateway1;gateway2
#
# dns=dns1;
#
# [ipv6]
# address1=ipaddr1/plen
# address2=ipaddr2/plen
#
# gateway=gateway1;gateway2
#
# dns=dns1;dns2
#
# The host can specify multiple ipv4 and ipv6 addresses to be
# configured for the interface. Furthermore, the configuration
# needs to be persistent. A subsequent GET call on the interface
# is expected to return the configuration that is set via the SET
# call.
#
echo "IPV6INIT=yes" >> $1
echo "NM_CONTROLLED=no" >> $1
echo "PEERDNS=yes" >> $1
echo "ONBOOT=yes" >> $1
cp $1 /etc/sysconfig/network-scripts/
chmod 600 $2
interface=$(echo $2 | awk -F - '{ print $2 }')
filename="${2##*/}"
sed '/\[connection\]/a autoconnect=true' $2 > /etc/NetworkManager/system-connections/${filename}
/sbin/ifdown $interface 2>/dev/null
/sbin/ifup $interface 2>/dev/null