mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-22 18:44:44 +08:00
ed5c2f5fd1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
1578 lines
35 KiB
C
1578 lines
35 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Afatech AF9013 demodulator driver
|
|
*
|
|
* Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
|
|
* Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
|
|
*
|
|
* Thanks to Afatech who kindly provided information.
|
|
*/
|
|
|
|
#include "af9013_priv.h"
|
|
|
|
struct af9013_state {
|
|
struct i2c_client *client;
|
|
struct regmap *regmap;
|
|
struct i2c_mux_core *muxc;
|
|
struct dvb_frontend fe;
|
|
u32 clk;
|
|
u8 tuner;
|
|
u32 if_frequency;
|
|
u8 ts_mode;
|
|
u8 ts_output_pin;
|
|
bool spec_inv;
|
|
u8 api_version[4];
|
|
u8 gpio[4];
|
|
|
|
u32 bandwidth_hz;
|
|
enum fe_status fe_status;
|
|
/* RF and IF AGC limits used for signal strength calc */
|
|
u8 strength_en, rf_agc_50, rf_agc_80, if_agc_50, if_agc_80;
|
|
unsigned long set_frontend_jiffies;
|
|
unsigned long read_status_jiffies;
|
|
unsigned long strength_jiffies;
|
|
unsigned long cnr_jiffies;
|
|
unsigned long ber_ucb_jiffies;
|
|
u16 dvbv3_snr;
|
|
u16 dvbv3_strength;
|
|
u32 dvbv3_ber;
|
|
u32 dvbv3_ucblocks;
|
|
bool first_tune;
|
|
};
|
|
|
|
static int af9013_set_gpio(struct af9013_state *state, u8 gpio, u8 gpioval)
|
|
{
|
|
struct i2c_client *client = state->client;
|
|
int ret;
|
|
u8 pos;
|
|
u16 addr;
|
|
|
|
dev_dbg(&client->dev, "gpio %u, gpioval %02x\n", gpio, gpioval);
|
|
|
|
/*
|
|
* GPIO0 & GPIO1 0xd735
|
|
* GPIO2 & GPIO3 0xd736
|
|
*/
|
|
|
|
switch (gpio) {
|
|
case 0:
|
|
case 1:
|
|
addr = 0xd735;
|
|
break;
|
|
case 2:
|
|
case 3:
|
|
addr = 0xd736;
|
|
break;
|
|
|
|
default:
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
switch (gpio) {
|
|
case 0:
|
|
case 2:
|
|
pos = 0;
|
|
break;
|
|
case 1:
|
|
case 3:
|
|
default:
|
|
pos = 4;
|
|
break;
|
|
}
|
|
|
|
ret = regmap_update_bits(state->regmap, addr, 0x0f << pos,
|
|
gpioval << pos);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int af9013_get_tune_settings(struct dvb_frontend *fe,
|
|
struct dvb_frontend_tune_settings *fesettings)
|
|
{
|
|
fesettings->min_delay_ms = 800;
|
|
fesettings->step_size = 0;
|
|
fesettings->max_drift = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int af9013_set_frontend(struct dvb_frontend *fe)
|
|
{
|
|
struct af9013_state *state = fe->demodulator_priv;
|
|
struct i2c_client *client = state->client;
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
int ret, i, sampling_freq;
|
|
bool auto_mode, spec_inv;
|
|
u8 buf[6];
|
|
u32 if_frequency, freq_cw;
|
|
|
|
dev_dbg(&client->dev, "frequency %u, bandwidth_hz %u\n",
|
|
c->frequency, c->bandwidth_hz);
|
|
|
|
/* program tuner */
|
|
if (fe->ops.tuner_ops.set_params) {
|
|
ret = fe->ops.tuner_ops.set_params(fe);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
/* program CFOE coefficients */
|
|
if (c->bandwidth_hz != state->bandwidth_hz) {
|
|
for (i = 0; i < ARRAY_SIZE(coeff_lut); i++) {
|
|
if (coeff_lut[i].clock == state->clk &&
|
|
coeff_lut[i].bandwidth_hz == c->bandwidth_hz) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Return an error if can't find bandwidth or the right clock */
|
|
if (i == ARRAY_SIZE(coeff_lut)) {
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
ret = regmap_bulk_write(state->regmap, 0xae00, coeff_lut[i].val,
|
|
sizeof(coeff_lut[i].val));
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
/* program frequency control */
|
|
if (c->bandwidth_hz != state->bandwidth_hz || state->first_tune) {
|
|
/* get used IF frequency */
|
|
if (fe->ops.tuner_ops.get_if_frequency) {
|
|
ret = fe->ops.tuner_ops.get_if_frequency(fe,
|
|
&if_frequency);
|
|
if (ret)
|
|
goto err;
|
|
} else {
|
|
if_frequency = state->if_frequency;
|
|
}
|
|
|
|
dev_dbg(&client->dev, "if_frequency %u\n", if_frequency);
|
|
|
|
sampling_freq = if_frequency;
|
|
|
|
while (sampling_freq > (state->clk / 2))
|
|
sampling_freq -= state->clk;
|
|
|
|
if (sampling_freq < 0) {
|
|
sampling_freq *= -1;
|
|
spec_inv = state->spec_inv;
|
|
} else {
|
|
spec_inv = !state->spec_inv;
|
|
}
|
|
|
|
freq_cw = DIV_ROUND_CLOSEST_ULL((u64)sampling_freq * 0x800000,
|
|
state->clk);
|
|
|
|
if (spec_inv)
|
|
freq_cw = 0x800000 - freq_cw;
|
|
|
|
buf[0] = (freq_cw >> 0) & 0xff;
|
|
buf[1] = (freq_cw >> 8) & 0xff;
|
|
buf[2] = (freq_cw >> 16) & 0x7f;
|
|
|
|
freq_cw = 0x800000 - freq_cw;
|
|
|
|
buf[3] = (freq_cw >> 0) & 0xff;
|
|
buf[4] = (freq_cw >> 8) & 0xff;
|
|
buf[5] = (freq_cw >> 16) & 0x7f;
|
|
|
|
ret = regmap_bulk_write(state->regmap, 0xd140, buf, 3);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_bulk_write(state->regmap, 0x9be7, buf, 6);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
/* clear TPS lock flag */
|
|
ret = regmap_update_bits(state->regmap, 0xd330, 0x08, 0x08);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* clear MPEG2 lock flag */
|
|
ret = regmap_update_bits(state->regmap, 0xd507, 0x40, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* empty channel function */
|
|
ret = regmap_update_bits(state->regmap, 0x9bfe, 0x01, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* empty DVB-T channel function */
|
|
ret = regmap_update_bits(state->regmap, 0x9bc2, 0x01, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* transmission parameters */
|
|
auto_mode = false;
|
|
memset(buf, 0, 3);
|
|
|
|
switch (c->transmission_mode) {
|
|
case TRANSMISSION_MODE_AUTO:
|
|
auto_mode = true;
|
|
break;
|
|
case TRANSMISSION_MODE_2K:
|
|
break;
|
|
case TRANSMISSION_MODE_8K:
|
|
buf[0] |= (1 << 0);
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid transmission_mode\n");
|
|
auto_mode = true;
|
|
}
|
|
|
|
switch (c->guard_interval) {
|
|
case GUARD_INTERVAL_AUTO:
|
|
auto_mode = true;
|
|
break;
|
|
case GUARD_INTERVAL_1_32:
|
|
break;
|
|
case GUARD_INTERVAL_1_16:
|
|
buf[0] |= (1 << 2);
|
|
break;
|
|
case GUARD_INTERVAL_1_8:
|
|
buf[0] |= (2 << 2);
|
|
break;
|
|
case GUARD_INTERVAL_1_4:
|
|
buf[0] |= (3 << 2);
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid guard_interval\n");
|
|
auto_mode = true;
|
|
}
|
|
|
|
switch (c->hierarchy) {
|
|
case HIERARCHY_AUTO:
|
|
auto_mode = true;
|
|
break;
|
|
case HIERARCHY_NONE:
|
|
break;
|
|
case HIERARCHY_1:
|
|
buf[0] |= (1 << 4);
|
|
break;
|
|
case HIERARCHY_2:
|
|
buf[0] |= (2 << 4);
|
|
break;
|
|
case HIERARCHY_4:
|
|
buf[0] |= (3 << 4);
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid hierarchy\n");
|
|
auto_mode = true;
|
|
}
|
|
|
|
switch (c->modulation) {
|
|
case QAM_AUTO:
|
|
auto_mode = true;
|
|
break;
|
|
case QPSK:
|
|
break;
|
|
case QAM_16:
|
|
buf[1] |= (1 << 6);
|
|
break;
|
|
case QAM_64:
|
|
buf[1] |= (2 << 6);
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid modulation\n");
|
|
auto_mode = true;
|
|
}
|
|
|
|
/* Use HP. How and which case we can switch to LP? */
|
|
buf[1] |= (1 << 4);
|
|
|
|
switch (c->code_rate_HP) {
|
|
case FEC_AUTO:
|
|
auto_mode = true;
|
|
break;
|
|
case FEC_1_2:
|
|
break;
|
|
case FEC_2_3:
|
|
buf[2] |= (1 << 0);
|
|
break;
|
|
case FEC_3_4:
|
|
buf[2] |= (2 << 0);
|
|
break;
|
|
case FEC_5_6:
|
|
buf[2] |= (3 << 0);
|
|
break;
|
|
case FEC_7_8:
|
|
buf[2] |= (4 << 0);
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid code_rate_HP\n");
|
|
auto_mode = true;
|
|
}
|
|
|
|
switch (c->code_rate_LP) {
|
|
case FEC_AUTO:
|
|
auto_mode = true;
|
|
break;
|
|
case FEC_1_2:
|
|
break;
|
|
case FEC_2_3:
|
|
buf[2] |= (1 << 3);
|
|
break;
|
|
case FEC_3_4:
|
|
buf[2] |= (2 << 3);
|
|
break;
|
|
case FEC_5_6:
|
|
buf[2] |= (3 << 3);
|
|
break;
|
|
case FEC_7_8:
|
|
buf[2] |= (4 << 3);
|
|
break;
|
|
case FEC_NONE:
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid code_rate_LP\n");
|
|
auto_mode = true;
|
|
}
|
|
|
|
switch (c->bandwidth_hz) {
|
|
case 6000000:
|
|
break;
|
|
case 7000000:
|
|
buf[1] |= (1 << 2);
|
|
break;
|
|
case 8000000:
|
|
buf[1] |= (2 << 2);
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid bandwidth_hz\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
ret = regmap_bulk_write(state->regmap, 0xd3c0, buf, 3);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (auto_mode) {
|
|
/* clear easy mode flag */
|
|
ret = regmap_write(state->regmap, 0xaefd, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
dev_dbg(&client->dev, "auto params\n");
|
|
} else {
|
|
/* set easy mode flag */
|
|
ret = regmap_write(state->regmap, 0xaefd, 0x01);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(state->regmap, 0xaefe, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
dev_dbg(&client->dev, "manual params\n");
|
|
}
|
|
|
|
/* Reset FSM */
|
|
ret = regmap_write(state->regmap, 0xffff, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
state->bandwidth_hz = c->bandwidth_hz;
|
|
state->set_frontend_jiffies = jiffies;
|
|
state->first_tune = false;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int af9013_get_frontend(struct dvb_frontend *fe,
|
|
struct dtv_frontend_properties *c)
|
|
{
|
|
struct af9013_state *state = fe->demodulator_priv;
|
|
struct i2c_client *client = state->client;
|
|
int ret;
|
|
u8 buf[3];
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
ret = regmap_bulk_read(state->regmap, 0xd3c0, buf, 3);
|
|
if (ret)
|
|
goto err;
|
|
|
|
switch ((buf[1] >> 6) & 3) {
|
|
case 0:
|
|
c->modulation = QPSK;
|
|
break;
|
|
case 1:
|
|
c->modulation = QAM_16;
|
|
break;
|
|
case 2:
|
|
c->modulation = QAM_64;
|
|
break;
|
|
}
|
|
|
|
switch ((buf[0] >> 0) & 3) {
|
|
case 0:
|
|
c->transmission_mode = TRANSMISSION_MODE_2K;
|
|
break;
|
|
case 1:
|
|
c->transmission_mode = TRANSMISSION_MODE_8K;
|
|
}
|
|
|
|
switch ((buf[0] >> 2) & 3) {
|
|
case 0:
|
|
c->guard_interval = GUARD_INTERVAL_1_32;
|
|
break;
|
|
case 1:
|
|
c->guard_interval = GUARD_INTERVAL_1_16;
|
|
break;
|
|
case 2:
|
|
c->guard_interval = GUARD_INTERVAL_1_8;
|
|
break;
|
|
case 3:
|
|
c->guard_interval = GUARD_INTERVAL_1_4;
|
|
break;
|
|
}
|
|
|
|
switch ((buf[0] >> 4) & 7) {
|
|
case 0:
|
|
c->hierarchy = HIERARCHY_NONE;
|
|
break;
|
|
case 1:
|
|
c->hierarchy = HIERARCHY_1;
|
|
break;
|
|
case 2:
|
|
c->hierarchy = HIERARCHY_2;
|
|
break;
|
|
case 3:
|
|
c->hierarchy = HIERARCHY_4;
|
|
break;
|
|
}
|
|
|
|
switch ((buf[2] >> 0) & 7) {
|
|
case 0:
|
|
c->code_rate_HP = FEC_1_2;
|
|
break;
|
|
case 1:
|
|
c->code_rate_HP = FEC_2_3;
|
|
break;
|
|
case 2:
|
|
c->code_rate_HP = FEC_3_4;
|
|
break;
|
|
case 3:
|
|
c->code_rate_HP = FEC_5_6;
|
|
break;
|
|
case 4:
|
|
c->code_rate_HP = FEC_7_8;
|
|
break;
|
|
}
|
|
|
|
switch ((buf[2] >> 3) & 7) {
|
|
case 0:
|
|
c->code_rate_LP = FEC_1_2;
|
|
break;
|
|
case 1:
|
|
c->code_rate_LP = FEC_2_3;
|
|
break;
|
|
case 2:
|
|
c->code_rate_LP = FEC_3_4;
|
|
break;
|
|
case 3:
|
|
c->code_rate_LP = FEC_5_6;
|
|
break;
|
|
case 4:
|
|
c->code_rate_LP = FEC_7_8;
|
|
break;
|
|
}
|
|
|
|
switch ((buf[1] >> 2) & 3) {
|
|
case 0:
|
|
c->bandwidth_hz = 6000000;
|
|
break;
|
|
case 1:
|
|
c->bandwidth_hz = 7000000;
|
|
break;
|
|
case 2:
|
|
c->bandwidth_hz = 8000000;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int af9013_read_status(struct dvb_frontend *fe, enum fe_status *status)
|
|
{
|
|
struct af9013_state *state = fe->demodulator_priv;
|
|
struct i2c_client *client = state->client;
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
int ret, stmp1;
|
|
unsigned int utmp, utmp1, utmp2, utmp3, utmp4;
|
|
u8 buf[7];
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
/*
|
|
* Return status from the cache if it is younger than 2000ms with the
|
|
* exception of last tune is done during 4000ms.
|
|
*/
|
|
if (time_is_after_jiffies(state->read_status_jiffies + msecs_to_jiffies(2000)) &&
|
|
time_is_before_jiffies(state->set_frontend_jiffies + msecs_to_jiffies(4000))) {
|
|
*status = state->fe_status;
|
|
} else {
|
|
/* MPEG2 lock */
|
|
ret = regmap_read(state->regmap, 0xd507, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if ((utmp >> 6) & 0x01) {
|
|
utmp1 = FE_HAS_SIGNAL | FE_HAS_CARRIER |
|
|
FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
|
|
} else {
|
|
/* TPS lock */
|
|
ret = regmap_read(state->regmap, 0xd330, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if ((utmp >> 3) & 0x01)
|
|
utmp1 = FE_HAS_SIGNAL | FE_HAS_CARRIER |
|
|
FE_HAS_VITERBI;
|
|
else
|
|
utmp1 = 0;
|
|
}
|
|
|
|
dev_dbg(&client->dev, "fe_status %02x\n", utmp1);
|
|
|
|
state->read_status_jiffies = jiffies;
|
|
|
|
state->fe_status = utmp1;
|
|
*status = utmp1;
|
|
}
|
|
|
|
/* Signal strength */
|
|
switch (state->strength_en) {
|
|
case 0:
|
|
/* Check if we support signal strength */
|
|
ret = regmap_read(state->regmap, 0x9bee, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if ((utmp >> 0) & 0x01) {
|
|
/* Read agc values for signal strength estimation */
|
|
ret = regmap_read(state->regmap, 0x9bbd, &utmp1);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_read(state->regmap, 0x9bd0, &utmp2);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_read(state->regmap, 0x9be2, &utmp3);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_read(state->regmap, 0x9be4, &utmp4);
|
|
if (ret)
|
|
goto err;
|
|
|
|
state->rf_agc_50 = utmp1;
|
|
state->rf_agc_80 = utmp2;
|
|
state->if_agc_50 = utmp3;
|
|
state->if_agc_80 = utmp4;
|
|
dev_dbg(&client->dev,
|
|
"rf_agc_50 %u, rf_agc_80 %u, if_agc_50 %u, if_agc_80 %u\n",
|
|
utmp1, utmp2, utmp3, utmp4);
|
|
|
|
state->strength_en = 1;
|
|
} else {
|
|
/* Signal strength is not supported */
|
|
state->strength_en = 2;
|
|
break;
|
|
}
|
|
fallthrough;
|
|
case 1:
|
|
if (time_is_after_jiffies(state->strength_jiffies + msecs_to_jiffies(2000)))
|
|
break;
|
|
|
|
/* Read value */
|
|
ret = regmap_bulk_read(state->regmap, 0xd07c, buf, 2);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/*
|
|
* Construct line equation from tuner dependent -80/-50 dBm agc
|
|
* limits and use it to map current agc value to dBm estimate
|
|
*/
|
|
#define agc_gain (buf[0] + buf[1])
|
|
#define agc_gain_50dbm (state->rf_agc_50 + state->if_agc_50)
|
|
#define agc_gain_80dbm (state->rf_agc_80 + state->if_agc_80)
|
|
stmp1 = 30000 * (agc_gain - agc_gain_80dbm) /
|
|
(agc_gain_50dbm - agc_gain_80dbm) - 80000;
|
|
|
|
dev_dbg(&client->dev,
|
|
"strength %d, agc_gain %d, agc_gain_50dbm %d, agc_gain_80dbm %d\n",
|
|
stmp1, agc_gain, agc_gain_50dbm, agc_gain_80dbm);
|
|
|
|
state->strength_jiffies = jiffies;
|
|
/* Convert [-90, -30] dBm to [0x0000, 0xffff] for dvbv3 */
|
|
utmp1 = clamp(stmp1 + 90000, 0, 60000);
|
|
state->dvbv3_strength = div_u64((u64)utmp1 * 0xffff, 60000);
|
|
|
|
c->strength.stat[0].scale = FE_SCALE_DECIBEL;
|
|
c->strength.stat[0].svalue = stmp1;
|
|
break;
|
|
default:
|
|
c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
break;
|
|
}
|
|
|
|
/* CNR */
|
|
switch (state->fe_status & FE_HAS_VITERBI) {
|
|
case FE_HAS_VITERBI:
|
|
if (time_is_after_jiffies(state->cnr_jiffies + msecs_to_jiffies(2000)))
|
|
break;
|
|
|
|
/* Check if cnr ready */
|
|
ret = regmap_read(state->regmap, 0xd2e1, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (!((utmp >> 3) & 0x01)) {
|
|
dev_dbg(&client->dev, "cnr not ready\n");
|
|
break;
|
|
}
|
|
|
|
/* Read value */
|
|
ret = regmap_bulk_read(state->regmap, 0xd2e3, buf, 3);
|
|
if (ret)
|
|
goto err;
|
|
|
|
utmp1 = buf[2] << 16 | buf[1] << 8 | buf[0] << 0;
|
|
|
|
/* Read current modulation */
|
|
ret = regmap_read(state->regmap, 0xd3c1, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
switch ((utmp >> 6) & 3) {
|
|
case 0:
|
|
/*
|
|
* QPSK
|
|
* CNR[dB] 13 * -log10((1690000 - value) / value) + 2.6
|
|
* value [653799, 1689999], 2.6 / 13 = 3355443
|
|
*/
|
|
utmp1 = clamp(utmp1, 653799U, 1689999U);
|
|
utmp1 = ((u64)(intlog10(utmp1)
|
|
- intlog10(1690000 - utmp1)
|
|
+ 3355443) * 13 * 1000) >> 24;
|
|
break;
|
|
case 1:
|
|
/*
|
|
* QAM-16
|
|
* CNR[dB] 6 * log10((value - 370000) / (828000 - value)) + 15.7
|
|
* value [371105, 827999], 15.7 / 6 = 43900382
|
|
*/
|
|
utmp1 = clamp(utmp1, 371105U, 827999U);
|
|
utmp1 = ((u64)(intlog10(utmp1 - 370000)
|
|
- intlog10(828000 - utmp1)
|
|
+ 43900382) * 6 * 1000) >> 24;
|
|
break;
|
|
case 2:
|
|
/*
|
|
* QAM-64
|
|
* CNR[dB] 8 * log10((value - 193000) / (425000 - value)) + 23.8
|
|
* value [193246, 424999], 23.8 / 8 = 49912218
|
|
*/
|
|
utmp1 = clamp(utmp1, 193246U, 424999U);
|
|
utmp1 = ((u64)(intlog10(utmp1 - 193000)
|
|
- intlog10(425000 - utmp1)
|
|
+ 49912218) * 8 * 1000) >> 24;
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid modulation %u\n",
|
|
(utmp >> 6) & 3);
|
|
utmp1 = 0;
|
|
break;
|
|
}
|
|
|
|
dev_dbg(&client->dev, "cnr %u\n", utmp1);
|
|
|
|
state->cnr_jiffies = jiffies;
|
|
state->dvbv3_snr = utmp1 / 100;
|
|
|
|
c->cnr.stat[0].scale = FE_SCALE_DECIBEL;
|
|
c->cnr.stat[0].svalue = utmp1;
|
|
break;
|
|
default:
|
|
c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
break;
|
|
}
|
|
|
|
/* BER / PER */
|
|
switch (state->fe_status & FE_HAS_SYNC) {
|
|
case FE_HAS_SYNC:
|
|
if (time_is_after_jiffies(state->ber_ucb_jiffies + msecs_to_jiffies(2000)))
|
|
break;
|
|
|
|
/* Check if ber / ucb is ready */
|
|
ret = regmap_read(state->regmap, 0xd391, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (!((utmp >> 4) & 0x01)) {
|
|
dev_dbg(&client->dev, "ber not ready\n");
|
|
break;
|
|
}
|
|
|
|
/* Read value */
|
|
ret = regmap_bulk_read(state->regmap, 0xd385, buf, 7);
|
|
if (ret)
|
|
goto err;
|
|
|
|
utmp1 = buf[4] << 16 | buf[3] << 8 | buf[2] << 0;
|
|
utmp2 = (buf[1] << 8 | buf[0] << 0) * 204 * 8;
|
|
utmp3 = buf[6] << 8 | buf[5] << 0;
|
|
utmp4 = buf[1] << 8 | buf[0] << 0;
|
|
|
|
/* Use 10000 TS packets for measure */
|
|
if (utmp4 != 10000) {
|
|
buf[0] = (10000 >> 0) & 0xff;
|
|
buf[1] = (10000 >> 8) & 0xff;
|
|
ret = regmap_bulk_write(state->regmap, 0xd385, buf, 2);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
/* Reset ber / ucb counter */
|
|
ret = regmap_update_bits(state->regmap, 0xd391, 0x20, 0x20);
|
|
if (ret)
|
|
goto err;
|
|
|
|
dev_dbg(&client->dev, "post_bit_error %u, post_bit_count %u\n",
|
|
utmp1, utmp2);
|
|
dev_dbg(&client->dev, "block_error %u, block_count %u\n",
|
|
utmp3, utmp4);
|
|
|
|
state->ber_ucb_jiffies = jiffies;
|
|
state->dvbv3_ber = utmp1;
|
|
state->dvbv3_ucblocks += utmp3;
|
|
|
|
c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->post_bit_error.stat[0].uvalue += utmp1;
|
|
c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->post_bit_count.stat[0].uvalue += utmp2;
|
|
|
|
c->block_error.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->block_error.stat[0].uvalue += utmp3;
|
|
c->block_count.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->block_count.stat[0].uvalue += utmp4;
|
|
break;
|
|
default:
|
|
c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
|
|
c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int af9013_read_snr(struct dvb_frontend *fe, u16 *snr)
|
|
{
|
|
struct af9013_state *state = fe->demodulator_priv;
|
|
|
|
*snr = state->dvbv3_snr;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int af9013_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
|
|
{
|
|
struct af9013_state *state = fe->demodulator_priv;
|
|
|
|
*strength = state->dvbv3_strength;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int af9013_read_ber(struct dvb_frontend *fe, u32 *ber)
|
|
{
|
|
struct af9013_state *state = fe->demodulator_priv;
|
|
|
|
*ber = state->dvbv3_ber;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int af9013_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
|
|
{
|
|
struct af9013_state *state = fe->demodulator_priv;
|
|
|
|
*ucblocks = state->dvbv3_ucblocks;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int af9013_init(struct dvb_frontend *fe)
|
|
{
|
|
struct af9013_state *state = fe->demodulator_priv;
|
|
struct i2c_client *client = state->client;
|
|
int ret, i, len;
|
|
unsigned int utmp;
|
|
u8 buf[3];
|
|
const struct af9013_reg_mask_val *tab;
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
/* ADC on */
|
|
ret = regmap_update_bits(state->regmap, 0xd73a, 0x08, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* Clear reset */
|
|
ret = regmap_update_bits(state->regmap, 0xd417, 0x02, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* Disable reset */
|
|
ret = regmap_update_bits(state->regmap, 0xd417, 0x10, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* write API version to firmware */
|
|
ret = regmap_bulk_write(state->regmap, 0x9bf2, state->api_version, 4);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* program ADC control */
|
|
switch (state->clk) {
|
|
case 28800000: /* 28.800 MHz */
|
|
utmp = 0;
|
|
break;
|
|
case 20480000: /* 20.480 MHz */
|
|
utmp = 1;
|
|
break;
|
|
case 28000000: /* 28.000 MHz */
|
|
utmp = 2;
|
|
break;
|
|
case 25000000: /* 25.000 MHz */
|
|
utmp = 3;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
ret = regmap_update_bits(state->regmap, 0x9bd2, 0x0f, utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
utmp = div_u64((u64)state->clk * 0x80000, 1000000);
|
|
buf[0] = (utmp >> 0) & 0xff;
|
|
buf[1] = (utmp >> 8) & 0xff;
|
|
buf[2] = (utmp >> 16) & 0xff;
|
|
ret = regmap_bulk_write(state->regmap, 0xd180, buf, 3);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* Demod core settings */
|
|
dev_dbg(&client->dev, "load demod core settings\n");
|
|
len = ARRAY_SIZE(demod_init_tab);
|
|
tab = demod_init_tab;
|
|
for (i = 0; i < len; i++) {
|
|
ret = regmap_update_bits(state->regmap, tab[i].reg, tab[i].mask,
|
|
tab[i].val);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
/* Demod tuner specific settings */
|
|
dev_dbg(&client->dev, "load tuner specific settings\n");
|
|
switch (state->tuner) {
|
|
case AF9013_TUNER_MXL5003D:
|
|
len = ARRAY_SIZE(tuner_init_tab_mxl5003d);
|
|
tab = tuner_init_tab_mxl5003d;
|
|
break;
|
|
case AF9013_TUNER_MXL5005D:
|
|
case AF9013_TUNER_MXL5005R:
|
|
case AF9013_TUNER_MXL5007T:
|
|
len = ARRAY_SIZE(tuner_init_tab_mxl5005);
|
|
tab = tuner_init_tab_mxl5005;
|
|
break;
|
|
case AF9013_TUNER_ENV77H11D5:
|
|
len = ARRAY_SIZE(tuner_init_tab_env77h11d5);
|
|
tab = tuner_init_tab_env77h11d5;
|
|
break;
|
|
case AF9013_TUNER_MT2060:
|
|
len = ARRAY_SIZE(tuner_init_tab_mt2060);
|
|
tab = tuner_init_tab_mt2060;
|
|
break;
|
|
case AF9013_TUNER_MC44S803:
|
|
len = ARRAY_SIZE(tuner_init_tab_mc44s803);
|
|
tab = tuner_init_tab_mc44s803;
|
|
break;
|
|
case AF9013_TUNER_QT1010:
|
|
case AF9013_TUNER_QT1010A:
|
|
len = ARRAY_SIZE(tuner_init_tab_qt1010);
|
|
tab = tuner_init_tab_qt1010;
|
|
break;
|
|
case AF9013_TUNER_MT2060_2:
|
|
len = ARRAY_SIZE(tuner_init_tab_mt2060_2);
|
|
tab = tuner_init_tab_mt2060_2;
|
|
break;
|
|
case AF9013_TUNER_TDA18271:
|
|
case AF9013_TUNER_TDA18218:
|
|
len = ARRAY_SIZE(tuner_init_tab_tda18271);
|
|
tab = tuner_init_tab_tda18271;
|
|
break;
|
|
case AF9013_TUNER_UNKNOWN:
|
|
default:
|
|
len = ARRAY_SIZE(tuner_init_tab_unknown);
|
|
tab = tuner_init_tab_unknown;
|
|
break;
|
|
}
|
|
|
|
for (i = 0; i < len; i++) {
|
|
ret = regmap_update_bits(state->regmap, tab[i].reg, tab[i].mask,
|
|
tab[i].val);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
/* TS interface */
|
|
if (state->ts_output_pin == 7)
|
|
utmp = 1 << 3 | state->ts_mode << 1;
|
|
else
|
|
utmp = 0 << 3 | state->ts_mode << 1;
|
|
ret = regmap_update_bits(state->regmap, 0xd500, 0x0e, utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* enable lock led */
|
|
ret = regmap_update_bits(state->regmap, 0xd730, 0x01, 0x01);
|
|
if (ret)
|
|
goto err;
|
|
|
|
state->first_tune = true;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int af9013_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct af9013_state *state = fe->demodulator_priv;
|
|
struct i2c_client *client = state->client;
|
|
int ret;
|
|
unsigned int utmp;
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
/* disable lock led */
|
|
ret = regmap_update_bits(state->regmap, 0xd730, 0x01, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* Enable reset */
|
|
ret = regmap_update_bits(state->regmap, 0xd417, 0x10, 0x10);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* Start reset execution */
|
|
ret = regmap_write(state->regmap, 0xaeff, 0x01);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* Wait reset performs */
|
|
ret = regmap_read_poll_timeout(state->regmap, 0xd417, utmp,
|
|
(utmp >> 1) & 0x01, 5000, 1000000);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (!((utmp >> 1) & 0x01)) {
|
|
ret = -ETIMEDOUT;
|
|
goto err;
|
|
}
|
|
|
|
/* ADC off */
|
|
ret = regmap_update_bits(state->regmap, 0xd73a, 0x08, 0x08);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static const struct dvb_frontend_ops af9013_ops;
|
|
|
|
static int af9013_download_firmware(struct af9013_state *state)
|
|
{
|
|
struct i2c_client *client = state->client;
|
|
int ret, i, len, rem;
|
|
unsigned int utmp;
|
|
u8 buf[4];
|
|
u16 checksum = 0;
|
|
const struct firmware *firmware;
|
|
const char *name = AF9013_FIRMWARE;
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
/* Check whether firmware is already running */
|
|
ret = regmap_read(state->regmap, 0x98be, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
dev_dbg(&client->dev, "firmware status %02x\n", utmp);
|
|
|
|
if (utmp == 0x0c)
|
|
return 0;
|
|
|
|
dev_info(&client->dev, "found a '%s' in cold state, will try to load a firmware\n",
|
|
af9013_ops.info.name);
|
|
|
|
/* Request the firmware, will block and timeout */
|
|
ret = request_firmware(&firmware, name, &client->dev);
|
|
if (ret) {
|
|
dev_info(&client->dev, "firmware file '%s' not found %d\n",
|
|
name, ret);
|
|
goto err;
|
|
}
|
|
|
|
dev_info(&client->dev, "downloading firmware from file '%s'\n",
|
|
name);
|
|
|
|
/* Write firmware checksum & size */
|
|
for (i = 0; i < firmware->size; i++)
|
|
checksum += firmware->data[i];
|
|
|
|
buf[0] = (checksum >> 8) & 0xff;
|
|
buf[1] = (checksum >> 0) & 0xff;
|
|
buf[2] = (firmware->size >> 8) & 0xff;
|
|
buf[3] = (firmware->size >> 0) & 0xff;
|
|
ret = regmap_bulk_write(state->regmap, 0x50fc, buf, 4);
|
|
if (ret)
|
|
goto err_release_firmware;
|
|
|
|
/* Download firmware */
|
|
#define LEN_MAX 16
|
|
for (rem = firmware->size; rem > 0; rem -= LEN_MAX) {
|
|
len = min(LEN_MAX, rem);
|
|
ret = regmap_bulk_write(state->regmap,
|
|
0x5100 + firmware->size - rem,
|
|
&firmware->data[firmware->size - rem],
|
|
len);
|
|
if (ret) {
|
|
dev_err(&client->dev, "firmware download failed %d\n",
|
|
ret);
|
|
goto err_release_firmware;
|
|
}
|
|
}
|
|
|
|
release_firmware(firmware);
|
|
|
|
/* Boot firmware */
|
|
ret = regmap_write(state->regmap, 0xe205, 0x01);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* Check firmware status. 0c=OK, 04=fail */
|
|
ret = regmap_read_poll_timeout(state->regmap, 0x98be, utmp,
|
|
(utmp == 0x0c || utmp == 0x04),
|
|
5000, 1000000);
|
|
if (ret)
|
|
goto err;
|
|
|
|
dev_dbg(&client->dev, "firmware status %02x\n", utmp);
|
|
|
|
if (utmp == 0x04) {
|
|
ret = -ENODEV;
|
|
dev_err(&client->dev, "firmware did not run\n");
|
|
goto err;
|
|
} else if (utmp != 0x0c) {
|
|
ret = -ENODEV;
|
|
dev_err(&client->dev, "firmware boot timeout\n");
|
|
goto err;
|
|
}
|
|
|
|
dev_info(&client->dev, "found a '%s' in warm state\n",
|
|
af9013_ops.info.name);
|
|
|
|
return 0;
|
|
err_release_firmware:
|
|
release_firmware(firmware);
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static const struct dvb_frontend_ops af9013_ops = {
|
|
.delsys = { SYS_DVBT },
|
|
.info = {
|
|
.name = "Afatech AF9013",
|
|
.frequency_min_hz = 174 * MHz,
|
|
.frequency_max_hz = 862 * MHz,
|
|
.frequency_stepsize_hz = 250 * kHz,
|
|
.caps = FE_CAN_FEC_1_2 |
|
|
FE_CAN_FEC_2_3 |
|
|
FE_CAN_FEC_3_4 |
|
|
FE_CAN_FEC_5_6 |
|
|
FE_CAN_FEC_7_8 |
|
|
FE_CAN_FEC_AUTO |
|
|
FE_CAN_QPSK |
|
|
FE_CAN_QAM_16 |
|
|
FE_CAN_QAM_64 |
|
|
FE_CAN_QAM_AUTO |
|
|
FE_CAN_TRANSMISSION_MODE_AUTO |
|
|
FE_CAN_GUARD_INTERVAL_AUTO |
|
|
FE_CAN_HIERARCHY_AUTO |
|
|
FE_CAN_RECOVER |
|
|
FE_CAN_MUTE_TS
|
|
},
|
|
|
|
.init = af9013_init,
|
|
.sleep = af9013_sleep,
|
|
|
|
.get_tune_settings = af9013_get_tune_settings,
|
|
.set_frontend = af9013_set_frontend,
|
|
.get_frontend = af9013_get_frontend,
|
|
|
|
.read_status = af9013_read_status,
|
|
.read_snr = af9013_read_snr,
|
|
.read_signal_strength = af9013_read_signal_strength,
|
|
.read_ber = af9013_read_ber,
|
|
.read_ucblocks = af9013_read_ucblocks,
|
|
};
|
|
|
|
static int af9013_pid_filter_ctrl(struct dvb_frontend *fe, int onoff)
|
|
{
|
|
struct af9013_state *state = fe->demodulator_priv;
|
|
struct i2c_client *client = state->client;
|
|
int ret;
|
|
|
|
dev_dbg(&client->dev, "onoff %d\n", onoff);
|
|
|
|
ret = regmap_update_bits(state->regmap, 0xd503, 0x01, onoff);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int af9013_pid_filter(struct dvb_frontend *fe, u8 index, u16 pid,
|
|
int onoff)
|
|
{
|
|
struct af9013_state *state = fe->demodulator_priv;
|
|
struct i2c_client *client = state->client;
|
|
int ret;
|
|
u8 buf[2];
|
|
|
|
dev_dbg(&client->dev, "index %d, pid %04x, onoff %d\n",
|
|
index, pid, onoff);
|
|
|
|
if (pid > 0x1fff) {
|
|
/* 0x2000 is kernel virtual pid for whole ts (all pids) */
|
|
ret = 0;
|
|
goto err;
|
|
}
|
|
|
|
buf[0] = (pid >> 0) & 0xff;
|
|
buf[1] = (pid >> 8) & 0xff;
|
|
ret = regmap_bulk_write(state->regmap, 0xd505, buf, 2);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(state->regmap, 0xd504, onoff << 5 | index << 0);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static struct dvb_frontend *af9013_get_dvb_frontend(struct i2c_client *client)
|
|
{
|
|
struct af9013_state *state = i2c_get_clientdata(client);
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
return &state->fe;
|
|
}
|
|
|
|
static struct i2c_adapter *af9013_get_i2c_adapter(struct i2c_client *client)
|
|
{
|
|
struct af9013_state *state = i2c_get_clientdata(client);
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
return state->muxc->adapter[0];
|
|
}
|
|
|
|
/*
|
|
* XXX: Hackish solution. We use virtual register, reg bit 16, to carry info
|
|
* about i2c adapter locking. Own locking is needed because i2c mux call has
|
|
* already locked i2c adapter.
|
|
*/
|
|
static int af9013_select(struct i2c_mux_core *muxc, u32 chan)
|
|
{
|
|
struct af9013_state *state = i2c_mux_priv(muxc);
|
|
struct i2c_client *client = state->client;
|
|
int ret;
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
if (state->ts_mode == AF9013_TS_MODE_USB)
|
|
ret = regmap_update_bits(state->regmap, 0x1d417, 0x08, 0x08);
|
|
else
|
|
ret = regmap_update_bits(state->regmap, 0x1d607, 0x04, 0x04);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int af9013_deselect(struct i2c_mux_core *muxc, u32 chan)
|
|
{
|
|
struct af9013_state *state = i2c_mux_priv(muxc);
|
|
struct i2c_client *client = state->client;
|
|
int ret;
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
if (state->ts_mode == AF9013_TS_MODE_USB)
|
|
ret = regmap_update_bits(state->regmap, 0x1d417, 0x08, 0x00);
|
|
else
|
|
ret = regmap_update_bits(state->regmap, 0x1d607, 0x04, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Own I2C access routines needed for regmap as chip uses extra command byte */
|
|
static int af9013_wregs(struct i2c_client *client, u8 cmd, u16 reg,
|
|
const u8 *val, int len, u8 lock)
|
|
{
|
|
int ret;
|
|
u8 buf[21];
|
|
struct i2c_msg msg[1] = {
|
|
{
|
|
.addr = client->addr,
|
|
.flags = 0,
|
|
.len = 3 + len,
|
|
.buf = buf,
|
|
}
|
|
};
|
|
|
|
if (3 + len > sizeof(buf)) {
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
buf[0] = (reg >> 8) & 0xff;
|
|
buf[1] = (reg >> 0) & 0xff;
|
|
buf[2] = cmd;
|
|
memcpy(&buf[3], val, len);
|
|
|
|
if (lock)
|
|
i2c_lock_bus(client->adapter, I2C_LOCK_SEGMENT);
|
|
ret = __i2c_transfer(client->adapter, msg, 1);
|
|
if (lock)
|
|
i2c_unlock_bus(client->adapter, I2C_LOCK_SEGMENT);
|
|
if (ret < 0) {
|
|
goto err;
|
|
} else if (ret != 1) {
|
|
ret = -EREMOTEIO;
|
|
goto err;
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int af9013_rregs(struct i2c_client *client, u8 cmd, u16 reg,
|
|
u8 *val, int len, u8 lock)
|
|
{
|
|
int ret;
|
|
u8 buf[3];
|
|
struct i2c_msg msg[2] = {
|
|
{
|
|
.addr = client->addr,
|
|
.flags = 0,
|
|
.len = 3,
|
|
.buf = buf,
|
|
}, {
|
|
.addr = client->addr,
|
|
.flags = I2C_M_RD,
|
|
.len = len,
|
|
.buf = val,
|
|
}
|
|
};
|
|
|
|
buf[0] = (reg >> 8) & 0xff;
|
|
buf[1] = (reg >> 0) & 0xff;
|
|
buf[2] = cmd;
|
|
|
|
if (lock)
|
|
i2c_lock_bus(client->adapter, I2C_LOCK_SEGMENT);
|
|
ret = __i2c_transfer(client->adapter, msg, 2);
|
|
if (lock)
|
|
i2c_unlock_bus(client->adapter, I2C_LOCK_SEGMENT);
|
|
if (ret < 0) {
|
|
goto err;
|
|
} else if (ret != 2) {
|
|
ret = -EREMOTEIO;
|
|
goto err;
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int af9013_regmap_write(void *context, const void *data, size_t count)
|
|
{
|
|
struct i2c_client *client = context;
|
|
struct af9013_state *state = i2c_get_clientdata(client);
|
|
int ret, i;
|
|
u8 cmd;
|
|
u8 lock = !((u8 *)data)[0];
|
|
u16 reg = ((u8 *)data)[1] << 8 | ((u8 *)data)[2] << 0;
|
|
u8 *val = &((u8 *)data)[3];
|
|
const unsigned int len = count - 3;
|
|
|
|
if (state->ts_mode == AF9013_TS_MODE_USB && (reg & 0xff00) != 0xae00) {
|
|
cmd = 0 << 7|0 << 6|(len - 1) << 2|1 << 1|1 << 0;
|
|
ret = af9013_wregs(client, cmd, reg, val, len, lock);
|
|
if (ret)
|
|
goto err;
|
|
} else if (reg >= 0x5100 && reg < 0x8fff) {
|
|
/* Firmware download */
|
|
cmd = 1 << 7|1 << 6|(len - 1) << 2|1 << 1|1 << 0;
|
|
ret = af9013_wregs(client, cmd, reg, val, len, lock);
|
|
if (ret)
|
|
goto err;
|
|
} else {
|
|
cmd = 0 << 7|0 << 6|(1 - 1) << 2|1 << 1|1 << 0;
|
|
for (i = 0; i < len; i++) {
|
|
ret = af9013_wregs(client, cmd, reg + i, val + i, 1,
|
|
lock);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int af9013_regmap_read(void *context, const void *reg_buf,
|
|
size_t reg_size, void *val_buf, size_t val_size)
|
|
{
|
|
struct i2c_client *client = context;
|
|
struct af9013_state *state = i2c_get_clientdata(client);
|
|
int ret, i;
|
|
u8 cmd;
|
|
u8 lock = !((u8 *)reg_buf)[0];
|
|
u16 reg = ((u8 *)reg_buf)[1] << 8 | ((u8 *)reg_buf)[2] << 0;
|
|
u8 *val = &((u8 *)val_buf)[0];
|
|
const unsigned int len = val_size;
|
|
|
|
if (state->ts_mode == AF9013_TS_MODE_USB && (reg & 0xff00) != 0xae00) {
|
|
cmd = 0 << 7|0 << 6|(len - 1) << 2|1 << 1|0 << 0;
|
|
ret = af9013_rregs(client, cmd, reg, val_buf, len, lock);
|
|
if (ret)
|
|
goto err;
|
|
} else {
|
|
cmd = 0 << 7|0 << 6|(1 - 1) << 2|1 << 1|0 << 0;
|
|
for (i = 0; i < len; i++) {
|
|
ret = af9013_rregs(client, cmd, reg + i, val + i, 1,
|
|
lock);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int af9013_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct af9013_state *state;
|
|
struct af9013_platform_data *pdata = client->dev.platform_data;
|
|
struct dtv_frontend_properties *c;
|
|
int ret, i;
|
|
u8 firmware_version[4];
|
|
static const struct regmap_bus regmap_bus = {
|
|
.read = af9013_regmap_read,
|
|
.write = af9013_regmap_write,
|
|
};
|
|
static const struct regmap_config regmap_config = {
|
|
/* Actual reg is 16 bits, see i2c adapter lock */
|
|
.reg_bits = 24,
|
|
.val_bits = 8,
|
|
};
|
|
|
|
state = kzalloc(sizeof(*state), GFP_KERNEL);
|
|
if (!state) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
/* Setup the state */
|
|
state->client = client;
|
|
i2c_set_clientdata(client, state);
|
|
state->clk = pdata->clk;
|
|
state->tuner = pdata->tuner;
|
|
state->if_frequency = pdata->if_frequency;
|
|
state->ts_mode = pdata->ts_mode;
|
|
state->ts_output_pin = pdata->ts_output_pin;
|
|
state->spec_inv = pdata->spec_inv;
|
|
memcpy(&state->api_version, pdata->api_version, sizeof(state->api_version));
|
|
memcpy(&state->gpio, pdata->gpio, sizeof(state->gpio));
|
|
state->regmap = regmap_init(&client->dev, ®map_bus, client,
|
|
®map_config);
|
|
if (IS_ERR(state->regmap)) {
|
|
ret = PTR_ERR(state->regmap);
|
|
goto err_kfree;
|
|
}
|
|
/* Create mux i2c adapter */
|
|
state->muxc = i2c_mux_alloc(client->adapter, &client->dev, 1, 0, 0,
|
|
af9013_select, af9013_deselect);
|
|
if (!state->muxc) {
|
|
ret = -ENOMEM;
|
|
goto err_regmap_exit;
|
|
}
|
|
state->muxc->priv = state;
|
|
ret = i2c_mux_add_adapter(state->muxc, 0, 0, 0);
|
|
if (ret)
|
|
goto err_regmap_exit;
|
|
|
|
/* Download firmware */
|
|
if (state->ts_mode != AF9013_TS_MODE_USB) {
|
|
ret = af9013_download_firmware(state);
|
|
if (ret)
|
|
goto err_i2c_mux_del_adapters;
|
|
}
|
|
|
|
/* Firmware version */
|
|
ret = regmap_bulk_read(state->regmap, 0x5103, firmware_version,
|
|
sizeof(firmware_version));
|
|
if (ret)
|
|
goto err_i2c_mux_del_adapters;
|
|
|
|
/* Set GPIOs */
|
|
for (i = 0; i < sizeof(state->gpio); i++) {
|
|
ret = af9013_set_gpio(state, i, state->gpio[i]);
|
|
if (ret)
|
|
goto err_i2c_mux_del_adapters;
|
|
}
|
|
|
|
/* Create dvb frontend */
|
|
memcpy(&state->fe.ops, &af9013_ops, sizeof(state->fe.ops));
|
|
state->fe.demodulator_priv = state;
|
|
|
|
/* Setup callbacks */
|
|
pdata->get_dvb_frontend = af9013_get_dvb_frontend;
|
|
pdata->get_i2c_adapter = af9013_get_i2c_adapter;
|
|
pdata->pid_filter = af9013_pid_filter;
|
|
pdata->pid_filter_ctrl = af9013_pid_filter_ctrl;
|
|
|
|
/* Init stats to indicate which stats are supported */
|
|
c = &state->fe.dtv_property_cache;
|
|
c->strength.len = 1;
|
|
c->cnr.len = 1;
|
|
c->post_bit_error.len = 1;
|
|
c->post_bit_count.len = 1;
|
|
c->block_error.len = 1;
|
|
c->block_count.len = 1;
|
|
|
|
dev_info(&client->dev, "Afatech AF9013 successfully attached\n");
|
|
dev_info(&client->dev, "firmware version: %d.%d.%d.%d\n",
|
|
firmware_version[0], firmware_version[1],
|
|
firmware_version[2], firmware_version[3]);
|
|
return 0;
|
|
err_i2c_mux_del_adapters:
|
|
i2c_mux_del_adapters(state->muxc);
|
|
err_regmap_exit:
|
|
regmap_exit(state->regmap);
|
|
err_kfree:
|
|
kfree(state);
|
|
err:
|
|
dev_dbg(&client->dev, "failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static void af9013_remove(struct i2c_client *client)
|
|
{
|
|
struct af9013_state *state = i2c_get_clientdata(client);
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
i2c_mux_del_adapters(state->muxc);
|
|
|
|
regmap_exit(state->regmap);
|
|
|
|
kfree(state);
|
|
}
|
|
|
|
static const struct i2c_device_id af9013_id_table[] = {
|
|
{"af9013", 0},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, af9013_id_table);
|
|
|
|
static struct i2c_driver af9013_driver = {
|
|
.driver = {
|
|
.name = "af9013",
|
|
.suppress_bind_attrs = true,
|
|
},
|
|
.probe = af9013_probe,
|
|
.remove = af9013_remove,
|
|
.id_table = af9013_id_table,
|
|
};
|
|
|
|
module_i2c_driver(af9013_driver);
|
|
|
|
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
|
|
MODULE_DESCRIPTION("Afatech AF9013 DVB-T demodulator driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_FIRMWARE(AF9013_FIRMWARE);
|