Rajendra Nayak 843be1e7fb clk: qcom: gdsc: Fix handling of hw control enable/disable ... Once a gdsc is brought in and out of HW control, there is a power down and up cycle which can take upto 1us. Polling on the gdsc status immediately after the hw control enable/disable can mislead software/firmware to belive the gdsc is already either on or off, while its yet to complete the power cycle. To avoid this add a 1us delay post a enable/disable of HW control mode. Also after the HW control mode is disabled, poll on the status to check gdsc status reflects its 'on' before force disabling it in software. Reported-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Tested-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Fixes: 904bb4f5c7 ("clk: qcom: gdsc: Add support for gdscs with HW control") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>		2017-01-26 16:00:38 -08:00
..
clk-alpha-pll.c	clk: qcom: Add .is_enabled ops for clk-alpha-pll	2016-11-02 14:52:58 -07:00
clk-alpha-pll.h	clk: qcom: Enable FSM mode for votable alpha PLLs	2016-11-01 18:39:17 -07:00
clk-branch.c	clk: Convert __clk_get_name(hw->clk) to clk_hw_get_name(hw)	2015-08-24 16:49:12 -07:00
clk-branch.h	clk: qcom: Add support for branches/gate clocks	2014-01-16 12:01:01 -08:00
clk-pll.c	clk: qcom: Enable FSM mode for votable alpha PLLs	2016-11-01 18:39:17 -07:00
clk-pll.h	clk: qcom: Add support for SR2 PLLs	2015-07-07 17:19:58 -07:00
clk-rcg2.c	clk: qcom: Add rcg ops to return floor value closest to the requested rate	2016-11-23 11:00:05 -08:00
clk-rcg.c	clk: qcom: Fix pre-divider usage for pixel RCG	2016-02-29 12:57:06 -08:00
clk-rcg.h	clk: qcom: Add rcg ops to return floor value closest to the requested rate	2016-11-23 11:00:05 -08:00
clk-regmap-divider.c	clk: qcom: Add support for regmap divider clocks	2015-01-27 11:49:00 -08:00
clk-regmap-divider.h	clk: qcom: Add support for regmap divider clocks	2015-01-27 11:49:00 -08:00
clk-regmap-mux.c	clk: qcom: Add simple regmap based muxes	2015-01-27 11:49:09 -08:00
clk-regmap-mux.h	clk: qcom: Add simple regmap based muxes	2015-01-27 11:49:09 -08:00
clk-regmap.c	clk: qcom: Migrate to clk_hw based registration and OF APIs	2016-08-24 17:37:06 -07:00
clk-regmap.h	clk: qcom: Migrate to clk_hw based registration and OF APIs	2016-08-24 17:37:06 -07:00
clk-rpm.c	clk: qcom: clk-rpm: Fix clk_hw references	2016-11-23 11:12:48 -08:00
clk-smd-rpm.c	clk: qcom: smd-rpmcc: Add msm8974 clocks	2016-12-21 16:04:35 -08:00
common.c	clk: qcom: Add rcg ops to return floor value closest to the requested rate	2016-11-23 11:00:05 -08:00
common.h	clk: qcom: Add rcg ops to return floor value closest to the requested rate	2016-11-23 11:00:05 -08:00
gcc-apq8084.c	clk: qcom: Move all sdcc rcgs to use clk_rcg2_floor_ops	2016-11-23 11:00:06 -08:00
gcc-ipq806x.c	clk: qcom: ipq806x: Fix board clk rates	2016-11-09 17:10:32 -08:00
gcc-ipq4019.c	clk: qcom: ipq4019: Add the cpu clock frequency change notifier	2016-12-27 13:44:34 -08:00
gcc-mdm9615.c	clk: mdm9615: Add EBI2 clock	2017-01-09 16:33:26 -08:00
gcc-msm8660.c	clk: qcom: add EBI2 clocks to the MSM8660 GCC	2016-07-01 18:12:45 -07:00
gcc-msm8916.c	clk: qcom: Move all sdcc rcgs to use clk_rcg2_floor_ops	2016-11-23 11:00:06 -08:00
gcc-msm8960.c	clk: qcom: Remove CLK_IS_ROOT	2016-03-04 12:53:53 -08:00
gcc-msm8974.c	clk: qcom: Move all sdcc rcgs to use clk_rcg2_floor_ops	2016-11-23 11:00:06 -08:00
gcc-msm8994.c	clk: qcom: Move all sdcc rcgs to use clk_rcg2_floor_ops	2016-11-23 11:00:06 -08:00
gcc-msm8996.c	clk: qcom: Add GCC_MSS_RESET support	2017-01-09 16:06:43 -08:00
gdsc.c	clk: qcom: gdsc: Fix handling of hw control enable/disable	2017-01-26 16:00:38 -08:00
gdsc.h	clk: qcom: gdsc: Add support for gdscs with HW control	2016-11-23 16:41:15 -08:00
Kconfig	Merge branch 'clk-qcom-rpm' into clk-next	2016-11-10 16:50:16 -08:00
lcc-ipq806x.c	clk: qcom: lcc-ipq806x: Fixup overriding val in regmap_read call	2016-11-01 17:44:09 -07:00
lcc-mdm9615.c	clk: mdm9615: Add support for MDM9615 Clock Controllers	2016-08-15 15:51:21 -07:00
lcc-msm8960.c	Revert "clk: qcom: Specify LE device endianness"	2016-02-12 14:24:24 -08:00
Makefile	Merge branch 'clk-qcom-rpm' into clk-next	2016-11-10 16:50:16 -08:00
mmcc-apq8084.c	Revert "clk: qcom: Specify LE device endianness"	2016-02-12 14:24:24 -08:00
mmcc-msm8960.c	clk: qcom: Remove CLK_IS_ROOT	2016-03-04 12:53:53 -08:00
mmcc-msm8974.c	Merge branch 'clk-fixes' into clk-next	2016-02-18 19:17:29 -08:00
mmcc-msm8996.c	clk: qcom: Put venus core0/1 gdscs to hw control mode	2016-11-23 16:41:19 -08:00
reset.c	clk: qcom: Make reset_control_ops const	2016-03-29 16:30:26 -07:00
reset.h	clk: qcom: Make reset_control_ops const	2016-03-29 16:30:26 -07:00