mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-18 17:54:13 +08:00
3e59091828
Default voltage constraints were being provided for fixed voltage regulator where board constraints were not provided but these constraints used INT_MIN as the default minimum voltage which is not a valid value since it is less than zero. Use 1uV instead. Also set the default values we set in the constraints themselves since otherwise the max_uV constraint we determine will not be stored in the actual constraint strucutre and will therefore not be used. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2311 lines
60 KiB
C
2311 lines
60 KiB
C
/*
|
|
* core.c -- Voltage/Current Regulator framework.
|
|
*
|
|
* Copyright 2007, 2008 Wolfson Microelectronics PLC.
|
|
* Copyright 2008 SlimLogic Ltd.
|
|
*
|
|
* Author: Liam Girdwood <lrg@slimlogic.co.uk>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/suspend.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/machine.h>
|
|
|
|
#define REGULATOR_VERSION "0.5"
|
|
|
|
static DEFINE_MUTEX(regulator_list_mutex);
|
|
static LIST_HEAD(regulator_list);
|
|
static LIST_HEAD(regulator_map_list);
|
|
static int has_full_constraints;
|
|
|
|
/*
|
|
* struct regulator_map
|
|
*
|
|
* Used to provide symbolic supply names to devices.
|
|
*/
|
|
struct regulator_map {
|
|
struct list_head list;
|
|
struct device *dev;
|
|
const char *supply;
|
|
struct regulator_dev *regulator;
|
|
};
|
|
|
|
/*
|
|
* struct regulator
|
|
*
|
|
* One for each consumer device.
|
|
*/
|
|
struct regulator {
|
|
struct device *dev;
|
|
struct list_head list;
|
|
int uA_load;
|
|
int min_uV;
|
|
int max_uV;
|
|
char *supply_name;
|
|
struct device_attribute dev_attr;
|
|
struct regulator_dev *rdev;
|
|
};
|
|
|
|
static int _regulator_is_enabled(struct regulator_dev *rdev);
|
|
static int _regulator_disable(struct regulator_dev *rdev);
|
|
static int _regulator_get_voltage(struct regulator_dev *rdev);
|
|
static int _regulator_get_current_limit(struct regulator_dev *rdev);
|
|
static unsigned int _regulator_get_mode(struct regulator_dev *rdev);
|
|
static void _notifier_call_chain(struct regulator_dev *rdev,
|
|
unsigned long event, void *data);
|
|
|
|
/* gets the regulator for a given consumer device */
|
|
static struct regulator *get_device_regulator(struct device *dev)
|
|
{
|
|
struct regulator *regulator = NULL;
|
|
struct regulator_dev *rdev;
|
|
|
|
mutex_lock(®ulator_list_mutex);
|
|
list_for_each_entry(rdev, ®ulator_list, list) {
|
|
mutex_lock(&rdev->mutex);
|
|
list_for_each_entry(regulator, &rdev->consumer_list, list) {
|
|
if (regulator->dev == dev) {
|
|
mutex_unlock(&rdev->mutex);
|
|
mutex_unlock(®ulator_list_mutex);
|
|
return regulator;
|
|
}
|
|
}
|
|
mutex_unlock(&rdev->mutex);
|
|
}
|
|
mutex_unlock(®ulator_list_mutex);
|
|
return NULL;
|
|
}
|
|
|
|
/* Platform voltage constraint check */
|
|
static int regulator_check_voltage(struct regulator_dev *rdev,
|
|
int *min_uV, int *max_uV)
|
|
{
|
|
BUG_ON(*min_uV > *max_uV);
|
|
|
|
if (!rdev->constraints) {
|
|
printk(KERN_ERR "%s: no constraints for %s\n", __func__,
|
|
rdev->desc->name);
|
|
return -ENODEV;
|
|
}
|
|
if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
|
|
printk(KERN_ERR "%s: operation not allowed for %s\n",
|
|
__func__, rdev->desc->name);
|
|
return -EPERM;
|
|
}
|
|
|
|
if (*max_uV > rdev->constraints->max_uV)
|
|
*max_uV = rdev->constraints->max_uV;
|
|
if (*min_uV < rdev->constraints->min_uV)
|
|
*min_uV = rdev->constraints->min_uV;
|
|
|
|
if (*min_uV > *max_uV)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* current constraint check */
|
|
static int regulator_check_current_limit(struct regulator_dev *rdev,
|
|
int *min_uA, int *max_uA)
|
|
{
|
|
BUG_ON(*min_uA > *max_uA);
|
|
|
|
if (!rdev->constraints) {
|
|
printk(KERN_ERR "%s: no constraints for %s\n", __func__,
|
|
rdev->desc->name);
|
|
return -ENODEV;
|
|
}
|
|
if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_CURRENT)) {
|
|
printk(KERN_ERR "%s: operation not allowed for %s\n",
|
|
__func__, rdev->desc->name);
|
|
return -EPERM;
|
|
}
|
|
|
|
if (*max_uA > rdev->constraints->max_uA)
|
|
*max_uA = rdev->constraints->max_uA;
|
|
if (*min_uA < rdev->constraints->min_uA)
|
|
*min_uA = rdev->constraints->min_uA;
|
|
|
|
if (*min_uA > *max_uA)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* operating mode constraint check */
|
|
static int regulator_check_mode(struct regulator_dev *rdev, int mode)
|
|
{
|
|
switch (mode) {
|
|
case REGULATOR_MODE_FAST:
|
|
case REGULATOR_MODE_NORMAL:
|
|
case REGULATOR_MODE_IDLE:
|
|
case REGULATOR_MODE_STANDBY:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!rdev->constraints) {
|
|
printk(KERN_ERR "%s: no constraints for %s\n", __func__,
|
|
rdev->desc->name);
|
|
return -ENODEV;
|
|
}
|
|
if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_MODE)) {
|
|
printk(KERN_ERR "%s: operation not allowed for %s\n",
|
|
__func__, rdev->desc->name);
|
|
return -EPERM;
|
|
}
|
|
if (!(rdev->constraints->valid_modes_mask & mode)) {
|
|
printk(KERN_ERR "%s: invalid mode %x for %s\n",
|
|
__func__, mode, rdev->desc->name);
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* dynamic regulator mode switching constraint check */
|
|
static int regulator_check_drms(struct regulator_dev *rdev)
|
|
{
|
|
if (!rdev->constraints) {
|
|
printk(KERN_ERR "%s: no constraints for %s\n", __func__,
|
|
rdev->desc->name);
|
|
return -ENODEV;
|
|
}
|
|
if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS)) {
|
|
printk(KERN_ERR "%s: operation not allowed for %s\n",
|
|
__func__, rdev->desc->name);
|
|
return -EPERM;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t device_requested_uA_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct regulator *regulator;
|
|
|
|
regulator = get_device_regulator(dev);
|
|
if (regulator == NULL)
|
|
return 0;
|
|
|
|
return sprintf(buf, "%d\n", regulator->uA_load);
|
|
}
|
|
|
|
static ssize_t regulator_uV_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct regulator_dev *rdev = dev_get_drvdata(dev);
|
|
ssize_t ret;
|
|
|
|
mutex_lock(&rdev->mutex);
|
|
ret = sprintf(buf, "%d\n", _regulator_get_voltage(rdev));
|
|
mutex_unlock(&rdev->mutex);
|
|
|
|
return ret;
|
|
}
|
|
static DEVICE_ATTR(microvolts, 0444, regulator_uV_show, NULL);
|
|
|
|
static ssize_t regulator_uA_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct regulator_dev *rdev = dev_get_drvdata(dev);
|
|
|
|
return sprintf(buf, "%d\n", _regulator_get_current_limit(rdev));
|
|
}
|
|
static DEVICE_ATTR(microamps, 0444, regulator_uA_show, NULL);
|
|
|
|
static ssize_t regulator_name_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct regulator_dev *rdev = dev_get_drvdata(dev);
|
|
const char *name;
|
|
|
|
if (rdev->constraints->name)
|
|
name = rdev->constraints->name;
|
|
else if (rdev->desc->name)
|
|
name = rdev->desc->name;
|
|
else
|
|
name = "";
|
|
|
|
return sprintf(buf, "%s\n", name);
|
|
}
|
|
|
|
static ssize_t regulator_print_opmode(char *buf, int mode)
|
|
{
|
|
switch (mode) {
|
|
case REGULATOR_MODE_FAST:
|
|
return sprintf(buf, "fast\n");
|
|
case REGULATOR_MODE_NORMAL:
|
|
return sprintf(buf, "normal\n");
|
|
case REGULATOR_MODE_IDLE:
|
|
return sprintf(buf, "idle\n");
|
|
case REGULATOR_MODE_STANDBY:
|
|
return sprintf(buf, "standby\n");
|
|
}
|
|
return sprintf(buf, "unknown\n");
|
|
}
|
|
|
|
static ssize_t regulator_opmode_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct regulator_dev *rdev = dev_get_drvdata(dev);
|
|
|
|
return regulator_print_opmode(buf, _regulator_get_mode(rdev));
|
|
}
|
|
static DEVICE_ATTR(opmode, 0444, regulator_opmode_show, NULL);
|
|
|
|
static ssize_t regulator_print_state(char *buf, int state)
|
|
{
|
|
if (state > 0)
|
|
return sprintf(buf, "enabled\n");
|
|
else if (state == 0)
|
|
return sprintf(buf, "disabled\n");
|
|
else
|
|
return sprintf(buf, "unknown\n");
|
|
}
|
|
|
|
static ssize_t regulator_state_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct regulator_dev *rdev = dev_get_drvdata(dev);
|
|
|
|
return regulator_print_state(buf, _regulator_is_enabled(rdev));
|
|
}
|
|
static DEVICE_ATTR(state, 0444, regulator_state_show, NULL);
|
|
|
|
static ssize_t regulator_status_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct regulator_dev *rdev = dev_get_drvdata(dev);
|
|
int status;
|
|
char *label;
|
|
|
|
status = rdev->desc->ops->get_status(rdev);
|
|
if (status < 0)
|
|
return status;
|
|
|
|
switch (status) {
|
|
case REGULATOR_STATUS_OFF:
|
|
label = "off";
|
|
break;
|
|
case REGULATOR_STATUS_ON:
|
|
label = "on";
|
|
break;
|
|
case REGULATOR_STATUS_ERROR:
|
|
label = "error";
|
|
break;
|
|
case REGULATOR_STATUS_FAST:
|
|
label = "fast";
|
|
break;
|
|
case REGULATOR_STATUS_NORMAL:
|
|
label = "normal";
|
|
break;
|
|
case REGULATOR_STATUS_IDLE:
|
|
label = "idle";
|
|
break;
|
|
case REGULATOR_STATUS_STANDBY:
|
|
label = "standby";
|
|
break;
|
|
default:
|
|
return -ERANGE;
|
|
}
|
|
|
|
return sprintf(buf, "%s\n", label);
|
|
}
|
|
static DEVICE_ATTR(status, 0444, regulator_status_show, NULL);
|
|
|
|
static ssize_t regulator_min_uA_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct regulator_dev *rdev = dev_get_drvdata(dev);
|
|
|
|
if (!rdev->constraints)
|
|
return sprintf(buf, "constraint not defined\n");
|
|
|
|
return sprintf(buf, "%d\n", rdev->constraints->min_uA);
|
|
}
|
|
static DEVICE_ATTR(min_microamps, 0444, regulator_min_uA_show, NULL);
|
|
|
|
static ssize_t regulator_max_uA_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct regulator_dev *rdev = dev_get_drvdata(dev);
|
|
|
|
if (!rdev->constraints)
|
|
return sprintf(buf, "constraint not defined\n");
|
|
|
|
return sprintf(buf, "%d\n", rdev->constraints->max_uA);
|
|
}
|
|
static DEVICE_ATTR(max_microamps, 0444, regulator_max_uA_show, NULL);
|
|
|
|
static ssize_t regulator_min_uV_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct regulator_dev *rdev = dev_get_drvdata(dev);
|
|
|
|
if (!rdev->constraints)
|
|
return sprintf(buf, "constraint not defined\n");
|
|
|
|
return sprintf(buf, "%d\n", rdev->constraints->min_uV);
|
|
}
|
|
static DEVICE_ATTR(min_microvolts, 0444, regulator_min_uV_show, NULL);
|
|
|
|
static ssize_t regulator_max_uV_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct regulator_dev *rdev = dev_get_drvdata(dev);
|
|
|
|
if (!rdev->constraints)
|
|
return sprintf(buf, "constraint not defined\n");
|
|
|
|
return sprintf(buf, "%d\n", rdev->constraints->max_uV);
|
|
}
|
|
static DEVICE_ATTR(max_microvolts, 0444, regulator_max_uV_show, NULL);
|
|
|
|
static ssize_t regulator_total_uA_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct regulator_dev *rdev = dev_get_drvdata(dev);
|
|
struct regulator *regulator;
|
|
int uA = 0;
|
|
|
|
mutex_lock(&rdev->mutex);
|
|
list_for_each_entry(regulator, &rdev->consumer_list, list)
|
|
uA += regulator->uA_load;
|
|
mutex_unlock(&rdev->mutex);
|
|
return sprintf(buf, "%d\n", uA);
|
|
}
|
|
static DEVICE_ATTR(requested_microamps, 0444, regulator_total_uA_show, NULL);
|
|
|
|
static ssize_t regulator_num_users_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct regulator_dev *rdev = dev_get_drvdata(dev);
|
|
return sprintf(buf, "%d\n", rdev->use_count);
|
|
}
|
|
|
|
static ssize_t regulator_type_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct regulator_dev *rdev = dev_get_drvdata(dev);
|
|
|
|
switch (rdev->desc->type) {
|
|
case REGULATOR_VOLTAGE:
|
|
return sprintf(buf, "voltage\n");
|
|
case REGULATOR_CURRENT:
|
|
return sprintf(buf, "current\n");
|
|
}
|
|
return sprintf(buf, "unknown\n");
|
|
}
|
|
|
|
static ssize_t regulator_suspend_mem_uV_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct regulator_dev *rdev = dev_get_drvdata(dev);
|
|
|
|
return sprintf(buf, "%d\n", rdev->constraints->state_mem.uV);
|
|
}
|
|
static DEVICE_ATTR(suspend_mem_microvolts, 0444,
|
|
regulator_suspend_mem_uV_show, NULL);
|
|
|
|
static ssize_t regulator_suspend_disk_uV_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct regulator_dev *rdev = dev_get_drvdata(dev);
|
|
|
|
return sprintf(buf, "%d\n", rdev->constraints->state_disk.uV);
|
|
}
|
|
static DEVICE_ATTR(suspend_disk_microvolts, 0444,
|
|
regulator_suspend_disk_uV_show, NULL);
|
|
|
|
static ssize_t regulator_suspend_standby_uV_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct regulator_dev *rdev = dev_get_drvdata(dev);
|
|
|
|
return sprintf(buf, "%d\n", rdev->constraints->state_standby.uV);
|
|
}
|
|
static DEVICE_ATTR(suspend_standby_microvolts, 0444,
|
|
regulator_suspend_standby_uV_show, NULL);
|
|
|
|
static ssize_t regulator_suspend_mem_mode_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct regulator_dev *rdev = dev_get_drvdata(dev);
|
|
|
|
return regulator_print_opmode(buf,
|
|
rdev->constraints->state_mem.mode);
|
|
}
|
|
static DEVICE_ATTR(suspend_mem_mode, 0444,
|
|
regulator_suspend_mem_mode_show, NULL);
|
|
|
|
static ssize_t regulator_suspend_disk_mode_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct regulator_dev *rdev = dev_get_drvdata(dev);
|
|
|
|
return regulator_print_opmode(buf,
|
|
rdev->constraints->state_disk.mode);
|
|
}
|
|
static DEVICE_ATTR(suspend_disk_mode, 0444,
|
|
regulator_suspend_disk_mode_show, NULL);
|
|
|
|
static ssize_t regulator_suspend_standby_mode_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct regulator_dev *rdev = dev_get_drvdata(dev);
|
|
|
|
return regulator_print_opmode(buf,
|
|
rdev->constraints->state_standby.mode);
|
|
}
|
|
static DEVICE_ATTR(suspend_standby_mode, 0444,
|
|
regulator_suspend_standby_mode_show, NULL);
|
|
|
|
static ssize_t regulator_suspend_mem_state_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct regulator_dev *rdev = dev_get_drvdata(dev);
|
|
|
|
return regulator_print_state(buf,
|
|
rdev->constraints->state_mem.enabled);
|
|
}
|
|
static DEVICE_ATTR(suspend_mem_state, 0444,
|
|
regulator_suspend_mem_state_show, NULL);
|
|
|
|
static ssize_t regulator_suspend_disk_state_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct regulator_dev *rdev = dev_get_drvdata(dev);
|
|
|
|
return regulator_print_state(buf,
|
|
rdev->constraints->state_disk.enabled);
|
|
}
|
|
static DEVICE_ATTR(suspend_disk_state, 0444,
|
|
regulator_suspend_disk_state_show, NULL);
|
|
|
|
static ssize_t regulator_suspend_standby_state_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct regulator_dev *rdev = dev_get_drvdata(dev);
|
|
|
|
return regulator_print_state(buf,
|
|
rdev->constraints->state_standby.enabled);
|
|
}
|
|
static DEVICE_ATTR(suspend_standby_state, 0444,
|
|
regulator_suspend_standby_state_show, NULL);
|
|
|
|
|
|
/*
|
|
* These are the only attributes are present for all regulators.
|
|
* Other attributes are a function of regulator functionality.
|
|
*/
|
|
static struct device_attribute regulator_dev_attrs[] = {
|
|
__ATTR(name, 0444, regulator_name_show, NULL),
|
|
__ATTR(num_users, 0444, regulator_num_users_show, NULL),
|
|
__ATTR(type, 0444, regulator_type_show, NULL),
|
|
__ATTR_NULL,
|
|
};
|
|
|
|
static void regulator_dev_release(struct device *dev)
|
|
{
|
|
struct regulator_dev *rdev = dev_get_drvdata(dev);
|
|
kfree(rdev);
|
|
}
|
|
|
|
static struct class regulator_class = {
|
|
.name = "regulator",
|
|
.dev_release = regulator_dev_release,
|
|
.dev_attrs = regulator_dev_attrs,
|
|
};
|
|
|
|
/* Calculate the new optimum regulator operating mode based on the new total
|
|
* consumer load. All locks held by caller */
|
|
static void drms_uA_update(struct regulator_dev *rdev)
|
|
{
|
|
struct regulator *sibling;
|
|
int current_uA = 0, output_uV, input_uV, err;
|
|
unsigned int mode;
|
|
|
|
err = regulator_check_drms(rdev);
|
|
if (err < 0 || !rdev->desc->ops->get_optimum_mode ||
|
|
!rdev->desc->ops->get_voltage || !rdev->desc->ops->set_mode)
|
|
return;
|
|
|
|
/* get output voltage */
|
|
output_uV = rdev->desc->ops->get_voltage(rdev);
|
|
if (output_uV <= 0)
|
|
return;
|
|
|
|
/* get input voltage */
|
|
if (rdev->supply && rdev->supply->desc->ops->get_voltage)
|
|
input_uV = rdev->supply->desc->ops->get_voltage(rdev->supply);
|
|
else
|
|
input_uV = rdev->constraints->input_uV;
|
|
if (input_uV <= 0)
|
|
return;
|
|
|
|
/* calc total requested load */
|
|
list_for_each_entry(sibling, &rdev->consumer_list, list)
|
|
current_uA += sibling->uA_load;
|
|
|
|
/* now get the optimum mode for our new total regulator load */
|
|
mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV,
|
|
output_uV, current_uA);
|
|
|
|
/* check the new mode is allowed */
|
|
err = regulator_check_mode(rdev, mode);
|
|
if (err == 0)
|
|
rdev->desc->ops->set_mode(rdev, mode);
|
|
}
|
|
|
|
static int suspend_set_state(struct regulator_dev *rdev,
|
|
struct regulator_state *rstate)
|
|
{
|
|
int ret = 0;
|
|
|
|
/* enable & disable are mandatory for suspend control */
|
|
if (!rdev->desc->ops->set_suspend_enable ||
|
|
!rdev->desc->ops->set_suspend_disable) {
|
|
printk(KERN_ERR "%s: no way to set suspend state\n",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (rstate->enabled)
|
|
ret = rdev->desc->ops->set_suspend_enable(rdev);
|
|
else
|
|
ret = rdev->desc->ops->set_suspend_disable(rdev);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "%s: failed to enabled/disable\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
if (rdev->desc->ops->set_suspend_voltage && rstate->uV > 0) {
|
|
ret = rdev->desc->ops->set_suspend_voltage(rdev, rstate->uV);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "%s: failed to set voltage\n",
|
|
__func__);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (rdev->desc->ops->set_suspend_mode && rstate->mode > 0) {
|
|
ret = rdev->desc->ops->set_suspend_mode(rdev, rstate->mode);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "%s: failed to set mode\n", __func__);
|
|
return ret;
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/* locks held by caller */
|
|
static int suspend_prepare(struct regulator_dev *rdev, suspend_state_t state)
|
|
{
|
|
if (!rdev->constraints)
|
|
return -EINVAL;
|
|
|
|
switch (state) {
|
|
case PM_SUSPEND_STANDBY:
|
|
return suspend_set_state(rdev,
|
|
&rdev->constraints->state_standby);
|
|
case PM_SUSPEND_MEM:
|
|
return suspend_set_state(rdev,
|
|
&rdev->constraints->state_mem);
|
|
case PM_SUSPEND_MAX:
|
|
return suspend_set_state(rdev,
|
|
&rdev->constraints->state_disk);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static void print_constraints(struct regulator_dev *rdev)
|
|
{
|
|
struct regulation_constraints *constraints = rdev->constraints;
|
|
char buf[80];
|
|
int count;
|
|
|
|
if (rdev->desc->type == REGULATOR_VOLTAGE) {
|
|
if (constraints->min_uV == constraints->max_uV)
|
|
count = sprintf(buf, "%d mV ",
|
|
constraints->min_uV / 1000);
|
|
else
|
|
count = sprintf(buf, "%d <--> %d mV ",
|
|
constraints->min_uV / 1000,
|
|
constraints->max_uV / 1000);
|
|
} else {
|
|
if (constraints->min_uA == constraints->max_uA)
|
|
count = sprintf(buf, "%d mA ",
|
|
constraints->min_uA / 1000);
|
|
else
|
|
count = sprintf(buf, "%d <--> %d mA ",
|
|
constraints->min_uA / 1000,
|
|
constraints->max_uA / 1000);
|
|
}
|
|
if (constraints->valid_modes_mask & REGULATOR_MODE_FAST)
|
|
count += sprintf(buf + count, "fast ");
|
|
if (constraints->valid_modes_mask & REGULATOR_MODE_NORMAL)
|
|
count += sprintf(buf + count, "normal ");
|
|
if (constraints->valid_modes_mask & REGULATOR_MODE_IDLE)
|
|
count += sprintf(buf + count, "idle ");
|
|
if (constraints->valid_modes_mask & REGULATOR_MODE_STANDBY)
|
|
count += sprintf(buf + count, "standby");
|
|
|
|
printk(KERN_INFO "regulator: %s: %s\n", rdev->desc->name, buf);
|
|
}
|
|
|
|
/**
|
|
* set_machine_constraints - sets regulator constraints
|
|
* @rdev: regulator source
|
|
* @constraints: constraints to apply
|
|
*
|
|
* Allows platform initialisation code to define and constrain
|
|
* regulator circuits e.g. valid voltage/current ranges, etc. NOTE:
|
|
* Constraints *must* be set by platform code in order for some
|
|
* regulator operations to proceed i.e. set_voltage, set_current_limit,
|
|
* set_mode.
|
|
*/
|
|
static int set_machine_constraints(struct regulator_dev *rdev,
|
|
struct regulation_constraints *constraints)
|
|
{
|
|
int ret = 0;
|
|
const char *name;
|
|
struct regulator_ops *ops = rdev->desc->ops;
|
|
|
|
if (constraints->name)
|
|
name = constraints->name;
|
|
else if (rdev->desc->name)
|
|
name = rdev->desc->name;
|
|
else
|
|
name = "regulator";
|
|
|
|
/* constrain machine-level voltage specs to fit
|
|
* the actual range supported by this regulator.
|
|
*/
|
|
if (ops->list_voltage && rdev->desc->n_voltages) {
|
|
int count = rdev->desc->n_voltages;
|
|
int i;
|
|
int min_uV = INT_MAX;
|
|
int max_uV = INT_MIN;
|
|
int cmin = constraints->min_uV;
|
|
int cmax = constraints->max_uV;
|
|
|
|
/* it's safe to autoconfigure fixed-voltage supplies
|
|
and the constraints are used by list_voltage. */
|
|
if (count == 1 && !cmin) {
|
|
cmin = 1;
|
|
cmax = INT_MAX;
|
|
constraints->min_uV = cmin;
|
|
constraints->max_uV = cmax;
|
|
}
|
|
|
|
/* voltage constraints are optional */
|
|
if ((cmin == 0) && (cmax == 0))
|
|
goto out;
|
|
|
|
/* else require explicit machine-level constraints */
|
|
if (cmin <= 0 || cmax <= 0 || cmax < cmin) {
|
|
pr_err("%s: %s '%s' voltage constraints\n",
|
|
__func__, "invalid", name);
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
/* initial: [cmin..cmax] valid, [min_uV..max_uV] not */
|
|
for (i = 0; i < count; i++) {
|
|
int value;
|
|
|
|
value = ops->list_voltage(rdev, i);
|
|
if (value <= 0)
|
|
continue;
|
|
|
|
/* maybe adjust [min_uV..max_uV] */
|
|
if (value >= cmin && value < min_uV)
|
|
min_uV = value;
|
|
if (value <= cmax && value > max_uV)
|
|
max_uV = value;
|
|
}
|
|
|
|
/* final: [min_uV..max_uV] valid iff constraints valid */
|
|
if (max_uV < min_uV) {
|
|
pr_err("%s: %s '%s' voltage constraints\n",
|
|
__func__, "unsupportable", name);
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
/* use regulator's subset of machine constraints */
|
|
if (constraints->min_uV < min_uV) {
|
|
pr_debug("%s: override '%s' %s, %d -> %d\n",
|
|
__func__, name, "min_uV",
|
|
constraints->min_uV, min_uV);
|
|
constraints->min_uV = min_uV;
|
|
}
|
|
if (constraints->max_uV > max_uV) {
|
|
pr_debug("%s: override '%s' %s, %d -> %d\n",
|
|
__func__, name, "max_uV",
|
|
constraints->max_uV, max_uV);
|
|
constraints->max_uV = max_uV;
|
|
}
|
|
}
|
|
|
|
rdev->constraints = constraints;
|
|
|
|
/* do we need to apply the constraint voltage */
|
|
if (rdev->constraints->apply_uV &&
|
|
rdev->constraints->min_uV == rdev->constraints->max_uV &&
|
|
ops->set_voltage) {
|
|
ret = ops->set_voltage(rdev,
|
|
rdev->constraints->min_uV, rdev->constraints->max_uV);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "%s: failed to apply %duV constraint to %s\n",
|
|
__func__,
|
|
rdev->constraints->min_uV, name);
|
|
rdev->constraints = NULL;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
/* do we need to setup our suspend state */
|
|
if (constraints->initial_state) {
|
|
ret = suspend_prepare(rdev, constraints->initial_state);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "%s: failed to set suspend state for %s\n",
|
|
__func__, name);
|
|
rdev->constraints = NULL;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
if (constraints->initial_mode) {
|
|
if (!ops->set_mode) {
|
|
printk(KERN_ERR "%s: no set_mode operation for %s\n",
|
|
__func__, name);
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
ret = ops->set_mode(rdev, constraints->initial_mode);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR
|
|
"%s: failed to set initial mode for %s: %d\n",
|
|
__func__, name, ret);
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
/* If the constraints say the regulator should be on at this point
|
|
* and we have control then make sure it is enabled.
|
|
*/
|
|
if ((constraints->always_on || constraints->boot_on) && ops->enable) {
|
|
ret = ops->enable(rdev);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "%s: failed to enable %s\n",
|
|
__func__, name);
|
|
rdev->constraints = NULL;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
print_constraints(rdev);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* set_supply - set regulator supply regulator
|
|
* @rdev: regulator name
|
|
* @supply_rdev: supply regulator name
|
|
*
|
|
* Called by platform initialisation code to set the supply regulator for this
|
|
* regulator. This ensures that a regulators supply will also be enabled by the
|
|
* core if it's child is enabled.
|
|
*/
|
|
static int set_supply(struct regulator_dev *rdev,
|
|
struct regulator_dev *supply_rdev)
|
|
{
|
|
int err;
|
|
|
|
err = sysfs_create_link(&rdev->dev.kobj, &supply_rdev->dev.kobj,
|
|
"supply");
|
|
if (err) {
|
|
printk(KERN_ERR
|
|
"%s: could not add device link %s err %d\n",
|
|
__func__, supply_rdev->dev.kobj.name, err);
|
|
goto out;
|
|
}
|
|
rdev->supply = supply_rdev;
|
|
list_add(&rdev->slist, &supply_rdev->supply_list);
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* set_consumer_device_supply: Bind a regulator to a symbolic supply
|
|
* @rdev: regulator source
|
|
* @consumer_dev: device the supply applies to
|
|
* @supply: symbolic name for supply
|
|
*
|
|
* Allows platform initialisation code to map physical regulator
|
|
* sources to symbolic names for supplies for use by devices. Devices
|
|
* should use these symbolic names to request regulators, avoiding the
|
|
* need to provide board-specific regulator names as platform data.
|
|
*/
|
|
static int set_consumer_device_supply(struct regulator_dev *rdev,
|
|
struct device *consumer_dev, const char *supply)
|
|
{
|
|
struct regulator_map *node;
|
|
|
|
if (supply == NULL)
|
|
return -EINVAL;
|
|
|
|
list_for_each_entry(node, ®ulator_map_list, list) {
|
|
if (consumer_dev != node->dev)
|
|
continue;
|
|
if (strcmp(node->supply, supply) != 0)
|
|
continue;
|
|
|
|
dev_dbg(consumer_dev, "%s/%s is '%s' supply; fail %s/%s\n",
|
|
dev_name(&node->regulator->dev),
|
|
node->regulator->desc->name,
|
|
supply,
|
|
dev_name(&rdev->dev), rdev->desc->name);
|
|
return -EBUSY;
|
|
}
|
|
|
|
node = kmalloc(sizeof(struct regulator_map), GFP_KERNEL);
|
|
if (node == NULL)
|
|
return -ENOMEM;
|
|
|
|
node->regulator = rdev;
|
|
node->dev = consumer_dev;
|
|
node->supply = supply;
|
|
|
|
list_add(&node->list, ®ulator_map_list);
|
|
return 0;
|
|
}
|
|
|
|
static void unset_consumer_device_supply(struct regulator_dev *rdev,
|
|
struct device *consumer_dev)
|
|
{
|
|
struct regulator_map *node, *n;
|
|
|
|
list_for_each_entry_safe(node, n, ®ulator_map_list, list) {
|
|
if (rdev == node->regulator &&
|
|
consumer_dev == node->dev) {
|
|
list_del(&node->list);
|
|
kfree(node);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void unset_regulator_supplies(struct regulator_dev *rdev)
|
|
{
|
|
struct regulator_map *node, *n;
|
|
|
|
list_for_each_entry_safe(node, n, ®ulator_map_list, list) {
|
|
if (rdev == node->regulator) {
|
|
list_del(&node->list);
|
|
kfree(node);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
#define REG_STR_SIZE 32
|
|
|
|
static struct regulator *create_regulator(struct regulator_dev *rdev,
|
|
struct device *dev,
|
|
const char *supply_name)
|
|
{
|
|
struct regulator *regulator;
|
|
char buf[REG_STR_SIZE];
|
|
int err, size;
|
|
|
|
regulator = kzalloc(sizeof(*regulator), GFP_KERNEL);
|
|
if (regulator == NULL)
|
|
return NULL;
|
|
|
|
mutex_lock(&rdev->mutex);
|
|
regulator->rdev = rdev;
|
|
list_add(®ulator->list, &rdev->consumer_list);
|
|
|
|
if (dev) {
|
|
/* create a 'requested_microamps_name' sysfs entry */
|
|
size = scnprintf(buf, REG_STR_SIZE, "microamps_requested_%s",
|
|
supply_name);
|
|
if (size >= REG_STR_SIZE)
|
|
goto overflow_err;
|
|
|
|
regulator->dev = dev;
|
|
regulator->dev_attr.attr.name = kstrdup(buf, GFP_KERNEL);
|
|
if (regulator->dev_attr.attr.name == NULL)
|
|
goto attr_name_err;
|
|
|
|
regulator->dev_attr.attr.owner = THIS_MODULE;
|
|
regulator->dev_attr.attr.mode = 0444;
|
|
regulator->dev_attr.show = device_requested_uA_show;
|
|
err = device_create_file(dev, ®ulator->dev_attr);
|
|
if (err < 0) {
|
|
printk(KERN_WARNING "%s: could not add regulator_dev"
|
|
" load sysfs\n", __func__);
|
|
goto attr_name_err;
|
|
}
|
|
|
|
/* also add a link to the device sysfs entry */
|
|
size = scnprintf(buf, REG_STR_SIZE, "%s-%s",
|
|
dev->kobj.name, supply_name);
|
|
if (size >= REG_STR_SIZE)
|
|
goto attr_err;
|
|
|
|
regulator->supply_name = kstrdup(buf, GFP_KERNEL);
|
|
if (regulator->supply_name == NULL)
|
|
goto attr_err;
|
|
|
|
err = sysfs_create_link(&rdev->dev.kobj, &dev->kobj,
|
|
buf);
|
|
if (err) {
|
|
printk(KERN_WARNING
|
|
"%s: could not add device link %s err %d\n",
|
|
__func__, dev->kobj.name, err);
|
|
device_remove_file(dev, ®ulator->dev_attr);
|
|
goto link_name_err;
|
|
}
|
|
}
|
|
mutex_unlock(&rdev->mutex);
|
|
return regulator;
|
|
link_name_err:
|
|
kfree(regulator->supply_name);
|
|
attr_err:
|
|
device_remove_file(regulator->dev, ®ulator->dev_attr);
|
|
attr_name_err:
|
|
kfree(regulator->dev_attr.attr.name);
|
|
overflow_err:
|
|
list_del(®ulator->list);
|
|
kfree(regulator);
|
|
mutex_unlock(&rdev->mutex);
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* regulator_get - lookup and obtain a reference to a regulator.
|
|
* @dev: device for regulator "consumer"
|
|
* @id: Supply name or regulator ID.
|
|
*
|
|
* Returns a struct regulator corresponding to the regulator producer,
|
|
* or IS_ERR() condition containing errno.
|
|
*
|
|
* Use of supply names configured via regulator_set_device_supply() is
|
|
* strongly encouraged. It is recommended that the supply name used
|
|
* should match the name used for the supply and/or the relevant
|
|
* device pins in the datasheet.
|
|
*/
|
|
struct regulator *regulator_get(struct device *dev, const char *id)
|
|
{
|
|
struct regulator_dev *rdev;
|
|
struct regulator_map *map;
|
|
struct regulator *regulator = ERR_PTR(-ENODEV);
|
|
|
|
if (id == NULL) {
|
|
printk(KERN_ERR "regulator: get() with no identifier\n");
|
|
return regulator;
|
|
}
|
|
|
|
mutex_lock(®ulator_list_mutex);
|
|
|
|
list_for_each_entry(map, ®ulator_map_list, list) {
|
|
if (dev == map->dev &&
|
|
strcmp(map->supply, id) == 0) {
|
|
rdev = map->regulator;
|
|
goto found;
|
|
}
|
|
}
|
|
mutex_unlock(®ulator_list_mutex);
|
|
return regulator;
|
|
|
|
found:
|
|
if (!try_module_get(rdev->owner))
|
|
goto out;
|
|
|
|
regulator = create_regulator(rdev, dev, id);
|
|
if (regulator == NULL) {
|
|
regulator = ERR_PTR(-ENOMEM);
|
|
module_put(rdev->owner);
|
|
}
|
|
|
|
out:
|
|
mutex_unlock(®ulator_list_mutex);
|
|
return regulator;
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_get);
|
|
|
|
/**
|
|
* regulator_put - "free" the regulator source
|
|
* @regulator: regulator source
|
|
*
|
|
* Note: drivers must ensure that all regulator_enable calls made on this
|
|
* regulator source are balanced by regulator_disable calls prior to calling
|
|
* this function.
|
|
*/
|
|
void regulator_put(struct regulator *regulator)
|
|
{
|
|
struct regulator_dev *rdev;
|
|
|
|
if (regulator == NULL || IS_ERR(regulator))
|
|
return;
|
|
|
|
mutex_lock(®ulator_list_mutex);
|
|
rdev = regulator->rdev;
|
|
|
|
/* remove any sysfs entries */
|
|
if (regulator->dev) {
|
|
sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name);
|
|
kfree(regulator->supply_name);
|
|
device_remove_file(regulator->dev, ®ulator->dev_attr);
|
|
kfree(regulator->dev_attr.attr.name);
|
|
}
|
|
list_del(®ulator->list);
|
|
kfree(regulator);
|
|
|
|
module_put(rdev->owner);
|
|
mutex_unlock(®ulator_list_mutex);
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_put);
|
|
|
|
/* locks held by regulator_enable() */
|
|
static int _regulator_enable(struct regulator_dev *rdev)
|
|
{
|
|
int ret = -EINVAL;
|
|
|
|
if (!rdev->constraints) {
|
|
printk(KERN_ERR "%s: %s has no constraints\n",
|
|
__func__, rdev->desc->name);
|
|
return ret;
|
|
}
|
|
|
|
/* do we need to enable the supply regulator first */
|
|
if (rdev->supply) {
|
|
ret = _regulator_enable(rdev->supply);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "%s: failed to enable %s: %d\n",
|
|
__func__, rdev->desc->name, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* check voltage and requested load before enabling */
|
|
if (rdev->desc->ops->enable) {
|
|
|
|
if (rdev->constraints &&
|
|
(rdev->constraints->valid_ops_mask &
|
|
REGULATOR_CHANGE_DRMS))
|
|
drms_uA_update(rdev);
|
|
|
|
ret = rdev->desc->ops->enable(rdev);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "%s: failed to enable %s: %d\n",
|
|
__func__, rdev->desc->name, ret);
|
|
return ret;
|
|
}
|
|
rdev->use_count++;
|
|
return ret;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* regulator_enable - enable regulator output
|
|
* @regulator: regulator source
|
|
*
|
|
* Request that the regulator be enabled with the regulator output at
|
|
* the predefined voltage or current value. Calls to regulator_enable()
|
|
* must be balanced with calls to regulator_disable().
|
|
*
|
|
* NOTE: the output value can be set by other drivers, boot loader or may be
|
|
* hardwired in the regulator.
|
|
*/
|
|
int regulator_enable(struct regulator *regulator)
|
|
{
|
|
struct regulator_dev *rdev = regulator->rdev;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&rdev->mutex);
|
|
ret = _regulator_enable(rdev);
|
|
mutex_unlock(&rdev->mutex);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_enable);
|
|
|
|
/* locks held by regulator_disable() */
|
|
static int _regulator_disable(struct regulator_dev *rdev)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (WARN(rdev->use_count <= 0,
|
|
"unbalanced disables for %s\n",
|
|
rdev->desc->name))
|
|
return -EIO;
|
|
|
|
/* are we the last user and permitted to disable ? */
|
|
if (rdev->use_count == 1 && !rdev->constraints->always_on) {
|
|
|
|
/* we are last user */
|
|
if (rdev->desc->ops->disable) {
|
|
ret = rdev->desc->ops->disable(rdev);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "%s: failed to disable %s\n",
|
|
__func__, rdev->desc->name);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* decrease our supplies ref count and disable if required */
|
|
if (rdev->supply)
|
|
_regulator_disable(rdev->supply);
|
|
|
|
rdev->use_count = 0;
|
|
} else if (rdev->use_count > 1) {
|
|
|
|
if (rdev->constraints &&
|
|
(rdev->constraints->valid_ops_mask &
|
|
REGULATOR_CHANGE_DRMS))
|
|
drms_uA_update(rdev);
|
|
|
|
rdev->use_count--;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* regulator_disable - disable regulator output
|
|
* @regulator: regulator source
|
|
*
|
|
* Disable the regulator output voltage or current. Calls to
|
|
* regulator_enable() must be balanced with calls to
|
|
* regulator_disable().
|
|
*
|
|
* NOTE: this will only disable the regulator output if no other consumer
|
|
* devices have it enabled, the regulator device supports disabling and
|
|
* machine constraints permit this operation.
|
|
*/
|
|
int regulator_disable(struct regulator *regulator)
|
|
{
|
|
struct regulator_dev *rdev = regulator->rdev;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&rdev->mutex);
|
|
ret = _regulator_disable(rdev);
|
|
mutex_unlock(&rdev->mutex);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_disable);
|
|
|
|
/* locks held by regulator_force_disable() */
|
|
static int _regulator_force_disable(struct regulator_dev *rdev)
|
|
{
|
|
int ret = 0;
|
|
|
|
/* force disable */
|
|
if (rdev->desc->ops->disable) {
|
|
/* ah well, who wants to live forever... */
|
|
ret = rdev->desc->ops->disable(rdev);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "%s: failed to force disable %s\n",
|
|
__func__, rdev->desc->name);
|
|
return ret;
|
|
}
|
|
/* notify other consumers that power has been forced off */
|
|
_notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE,
|
|
NULL);
|
|
}
|
|
|
|
/* decrease our supplies ref count and disable if required */
|
|
if (rdev->supply)
|
|
_regulator_disable(rdev->supply);
|
|
|
|
rdev->use_count = 0;
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* regulator_force_disable - force disable regulator output
|
|
* @regulator: regulator source
|
|
*
|
|
* Forcibly disable the regulator output voltage or current.
|
|
* NOTE: this *will* disable the regulator output even if other consumer
|
|
* devices have it enabled. This should be used for situations when device
|
|
* damage will likely occur if the regulator is not disabled (e.g. over temp).
|
|
*/
|
|
int regulator_force_disable(struct regulator *regulator)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(®ulator->rdev->mutex);
|
|
regulator->uA_load = 0;
|
|
ret = _regulator_force_disable(regulator->rdev);
|
|
mutex_unlock(®ulator->rdev->mutex);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_force_disable);
|
|
|
|
static int _regulator_is_enabled(struct regulator_dev *rdev)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&rdev->mutex);
|
|
|
|
/* sanity check */
|
|
if (!rdev->desc->ops->is_enabled) {
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
ret = rdev->desc->ops->is_enabled(rdev);
|
|
out:
|
|
mutex_unlock(&rdev->mutex);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* regulator_is_enabled - is the regulator output enabled
|
|
* @regulator: regulator source
|
|
*
|
|
* Returns positive if the regulator driver backing the source/client
|
|
* has requested that the device be enabled, zero if it hasn't, else a
|
|
* negative errno code.
|
|
*
|
|
* Note that the device backing this regulator handle can have multiple
|
|
* users, so it might be enabled even if regulator_enable() was never
|
|
* called for this particular source.
|
|
*/
|
|
int regulator_is_enabled(struct regulator *regulator)
|
|
{
|
|
return _regulator_is_enabled(regulator->rdev);
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_is_enabled);
|
|
|
|
/**
|
|
* regulator_count_voltages - count regulator_list_voltage() selectors
|
|
* @regulator: regulator source
|
|
*
|
|
* Returns number of selectors, or negative errno. Selectors are
|
|
* numbered starting at zero, and typically correspond to bitfields
|
|
* in hardware registers.
|
|
*/
|
|
int regulator_count_voltages(struct regulator *regulator)
|
|
{
|
|
struct regulator_dev *rdev = regulator->rdev;
|
|
|
|
return rdev->desc->n_voltages ? : -EINVAL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_count_voltages);
|
|
|
|
/**
|
|
* regulator_list_voltage - enumerate supported voltages
|
|
* @regulator: regulator source
|
|
* @selector: identify voltage to list
|
|
* Context: can sleep
|
|
*
|
|
* Returns a voltage that can be passed to @regulator_set_voltage(),
|
|
* zero if this selector code can't be used on this sytem, or a
|
|
* negative errno.
|
|
*/
|
|
int regulator_list_voltage(struct regulator *regulator, unsigned selector)
|
|
{
|
|
struct regulator_dev *rdev = regulator->rdev;
|
|
struct regulator_ops *ops = rdev->desc->ops;
|
|
int ret;
|
|
|
|
if (!ops->list_voltage || selector >= rdev->desc->n_voltages)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&rdev->mutex);
|
|
ret = ops->list_voltage(rdev, selector);
|
|
mutex_unlock(&rdev->mutex);
|
|
|
|
if (ret > 0) {
|
|
if (ret < rdev->constraints->min_uV)
|
|
ret = 0;
|
|
else if (ret > rdev->constraints->max_uV)
|
|
ret = 0;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_list_voltage);
|
|
|
|
/**
|
|
* regulator_set_voltage - set regulator output voltage
|
|
* @regulator: regulator source
|
|
* @min_uV: Minimum required voltage in uV
|
|
* @max_uV: Maximum acceptable voltage in uV
|
|
*
|
|
* Sets a voltage regulator to the desired output voltage. This can be set
|
|
* during any regulator state. IOW, regulator can be disabled or enabled.
|
|
*
|
|
* If the regulator is enabled then the voltage will change to the new value
|
|
* immediately otherwise if the regulator is disabled the regulator will
|
|
* output at the new voltage when enabled.
|
|
*
|
|
* NOTE: If the regulator is shared between several devices then the lowest
|
|
* request voltage that meets the system constraints will be used.
|
|
* Regulator system constraints must be set for this regulator before
|
|
* calling this function otherwise this call will fail.
|
|
*/
|
|
int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
|
|
{
|
|
struct regulator_dev *rdev = regulator->rdev;
|
|
int ret;
|
|
|
|
mutex_lock(&rdev->mutex);
|
|
|
|
/* sanity check */
|
|
if (!rdev->desc->ops->set_voltage) {
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
/* constraints check */
|
|
ret = regulator_check_voltage(rdev, &min_uV, &max_uV);
|
|
if (ret < 0)
|
|
goto out;
|
|
regulator->min_uV = min_uV;
|
|
regulator->max_uV = max_uV;
|
|
ret = rdev->desc->ops->set_voltage(rdev, min_uV, max_uV);
|
|
|
|
out:
|
|
_notifier_call_chain(rdev, REGULATOR_EVENT_VOLTAGE_CHANGE, NULL);
|
|
mutex_unlock(&rdev->mutex);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_set_voltage);
|
|
|
|
static int _regulator_get_voltage(struct regulator_dev *rdev)
|
|
{
|
|
/* sanity check */
|
|
if (rdev->desc->ops->get_voltage)
|
|
return rdev->desc->ops->get_voltage(rdev);
|
|
else
|
|
return -EINVAL;
|
|
}
|
|
|
|
/**
|
|
* regulator_get_voltage - get regulator output voltage
|
|
* @regulator: regulator source
|
|
*
|
|
* This returns the current regulator voltage in uV.
|
|
*
|
|
* NOTE: If the regulator is disabled it will return the voltage value. This
|
|
* function should not be used to determine regulator state.
|
|
*/
|
|
int regulator_get_voltage(struct regulator *regulator)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(®ulator->rdev->mutex);
|
|
|
|
ret = _regulator_get_voltage(regulator->rdev);
|
|
|
|
mutex_unlock(®ulator->rdev->mutex);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_get_voltage);
|
|
|
|
/**
|
|
* regulator_set_current_limit - set regulator output current limit
|
|
* @regulator: regulator source
|
|
* @min_uA: Minimuum supported current in uA
|
|
* @max_uA: Maximum supported current in uA
|
|
*
|
|
* Sets current sink to the desired output current. This can be set during
|
|
* any regulator state. IOW, regulator can be disabled or enabled.
|
|
*
|
|
* If the regulator is enabled then the current will change to the new value
|
|
* immediately otherwise if the regulator is disabled the regulator will
|
|
* output at the new current when enabled.
|
|
*
|
|
* NOTE: Regulator system constraints must be set for this regulator before
|
|
* calling this function otherwise this call will fail.
|
|
*/
|
|
int regulator_set_current_limit(struct regulator *regulator,
|
|
int min_uA, int max_uA)
|
|
{
|
|
struct regulator_dev *rdev = regulator->rdev;
|
|
int ret;
|
|
|
|
mutex_lock(&rdev->mutex);
|
|
|
|
/* sanity check */
|
|
if (!rdev->desc->ops->set_current_limit) {
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
/* constraints check */
|
|
ret = regulator_check_current_limit(rdev, &min_uA, &max_uA);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
ret = rdev->desc->ops->set_current_limit(rdev, min_uA, max_uA);
|
|
out:
|
|
mutex_unlock(&rdev->mutex);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_set_current_limit);
|
|
|
|
static int _regulator_get_current_limit(struct regulator_dev *rdev)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&rdev->mutex);
|
|
|
|
/* sanity check */
|
|
if (!rdev->desc->ops->get_current_limit) {
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
ret = rdev->desc->ops->get_current_limit(rdev);
|
|
out:
|
|
mutex_unlock(&rdev->mutex);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* regulator_get_current_limit - get regulator output current
|
|
* @regulator: regulator source
|
|
*
|
|
* This returns the current supplied by the specified current sink in uA.
|
|
*
|
|
* NOTE: If the regulator is disabled it will return the current value. This
|
|
* function should not be used to determine regulator state.
|
|
*/
|
|
int regulator_get_current_limit(struct regulator *regulator)
|
|
{
|
|
return _regulator_get_current_limit(regulator->rdev);
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_get_current_limit);
|
|
|
|
/**
|
|
* regulator_set_mode - set regulator operating mode
|
|
* @regulator: regulator source
|
|
* @mode: operating mode - one of the REGULATOR_MODE constants
|
|
*
|
|
* Set regulator operating mode to increase regulator efficiency or improve
|
|
* regulation performance.
|
|
*
|
|
* NOTE: Regulator system constraints must be set for this regulator before
|
|
* calling this function otherwise this call will fail.
|
|
*/
|
|
int regulator_set_mode(struct regulator *regulator, unsigned int mode)
|
|
{
|
|
struct regulator_dev *rdev = regulator->rdev;
|
|
int ret;
|
|
|
|
mutex_lock(&rdev->mutex);
|
|
|
|
/* sanity check */
|
|
if (!rdev->desc->ops->set_mode) {
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
/* constraints check */
|
|
ret = regulator_check_mode(rdev, mode);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
ret = rdev->desc->ops->set_mode(rdev, mode);
|
|
out:
|
|
mutex_unlock(&rdev->mutex);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_set_mode);
|
|
|
|
static unsigned int _regulator_get_mode(struct regulator_dev *rdev)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&rdev->mutex);
|
|
|
|
/* sanity check */
|
|
if (!rdev->desc->ops->get_mode) {
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
ret = rdev->desc->ops->get_mode(rdev);
|
|
out:
|
|
mutex_unlock(&rdev->mutex);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* regulator_get_mode - get regulator operating mode
|
|
* @regulator: regulator source
|
|
*
|
|
* Get the current regulator operating mode.
|
|
*/
|
|
unsigned int regulator_get_mode(struct regulator *regulator)
|
|
{
|
|
return _regulator_get_mode(regulator->rdev);
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_get_mode);
|
|
|
|
/**
|
|
* regulator_set_optimum_mode - set regulator optimum operating mode
|
|
* @regulator: regulator source
|
|
* @uA_load: load current
|
|
*
|
|
* Notifies the regulator core of a new device load. This is then used by
|
|
* DRMS (if enabled by constraints) to set the most efficient regulator
|
|
* operating mode for the new regulator loading.
|
|
*
|
|
* Consumer devices notify their supply regulator of the maximum power
|
|
* they will require (can be taken from device datasheet in the power
|
|
* consumption tables) when they change operational status and hence power
|
|
* state. Examples of operational state changes that can affect power
|
|
* consumption are :-
|
|
*
|
|
* o Device is opened / closed.
|
|
* o Device I/O is about to begin or has just finished.
|
|
* o Device is idling in between work.
|
|
*
|
|
* This information is also exported via sysfs to userspace.
|
|
*
|
|
* DRMS will sum the total requested load on the regulator and change
|
|
* to the most efficient operating mode if platform constraints allow.
|
|
*
|
|
* Returns the new regulator mode or error.
|
|
*/
|
|
int regulator_set_optimum_mode(struct regulator *regulator, int uA_load)
|
|
{
|
|
struct regulator_dev *rdev = regulator->rdev;
|
|
struct regulator *consumer;
|
|
int ret, output_uV, input_uV, total_uA_load = 0;
|
|
unsigned int mode;
|
|
|
|
mutex_lock(&rdev->mutex);
|
|
|
|
regulator->uA_load = uA_load;
|
|
ret = regulator_check_drms(rdev);
|
|
if (ret < 0)
|
|
goto out;
|
|
ret = -EINVAL;
|
|
|
|
/* sanity check */
|
|
if (!rdev->desc->ops->get_optimum_mode)
|
|
goto out;
|
|
|
|
/* get output voltage */
|
|
output_uV = rdev->desc->ops->get_voltage(rdev);
|
|
if (output_uV <= 0) {
|
|
printk(KERN_ERR "%s: invalid output voltage found for %s\n",
|
|
__func__, rdev->desc->name);
|
|
goto out;
|
|
}
|
|
|
|
/* get input voltage */
|
|
if (rdev->supply && rdev->supply->desc->ops->get_voltage)
|
|
input_uV = rdev->supply->desc->ops->get_voltage(rdev->supply);
|
|
else
|
|
input_uV = rdev->constraints->input_uV;
|
|
if (input_uV <= 0) {
|
|
printk(KERN_ERR "%s: invalid input voltage found for %s\n",
|
|
__func__, rdev->desc->name);
|
|
goto out;
|
|
}
|
|
|
|
/* calc total requested load for this regulator */
|
|
list_for_each_entry(consumer, &rdev->consumer_list, list)
|
|
total_uA_load += consumer->uA_load;
|
|
|
|
mode = rdev->desc->ops->get_optimum_mode(rdev,
|
|
input_uV, output_uV,
|
|
total_uA_load);
|
|
ret = regulator_check_mode(rdev, mode);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "%s: failed to get optimum mode for %s @"
|
|
" %d uA %d -> %d uV\n", __func__, rdev->desc->name,
|
|
total_uA_load, input_uV, output_uV);
|
|
goto out;
|
|
}
|
|
|
|
ret = rdev->desc->ops->set_mode(rdev, mode);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "%s: failed to set optimum mode %x for %s\n",
|
|
__func__, mode, rdev->desc->name);
|
|
goto out;
|
|
}
|
|
ret = mode;
|
|
out:
|
|
mutex_unlock(&rdev->mutex);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_set_optimum_mode);
|
|
|
|
/**
|
|
* regulator_register_notifier - register regulator event notifier
|
|
* @regulator: regulator source
|
|
* @nb: notifier block
|
|
*
|
|
* Register notifier block to receive regulator events.
|
|
*/
|
|
int regulator_register_notifier(struct regulator *regulator,
|
|
struct notifier_block *nb)
|
|
{
|
|
return blocking_notifier_chain_register(®ulator->rdev->notifier,
|
|
nb);
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_register_notifier);
|
|
|
|
/**
|
|
* regulator_unregister_notifier - unregister regulator event notifier
|
|
* @regulator: regulator source
|
|
* @nb: notifier block
|
|
*
|
|
* Unregister regulator event notifier block.
|
|
*/
|
|
int regulator_unregister_notifier(struct regulator *regulator,
|
|
struct notifier_block *nb)
|
|
{
|
|
return blocking_notifier_chain_unregister(®ulator->rdev->notifier,
|
|
nb);
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_unregister_notifier);
|
|
|
|
/* notify regulator consumers and downstream regulator consumers.
|
|
* Note mutex must be held by caller.
|
|
*/
|
|
static void _notifier_call_chain(struct regulator_dev *rdev,
|
|
unsigned long event, void *data)
|
|
{
|
|
struct regulator_dev *_rdev;
|
|
|
|
/* call rdev chain first */
|
|
blocking_notifier_call_chain(&rdev->notifier, event, NULL);
|
|
|
|
/* now notify regulator we supply */
|
|
list_for_each_entry(_rdev, &rdev->supply_list, slist) {
|
|
mutex_lock(&_rdev->mutex);
|
|
_notifier_call_chain(_rdev, event, data);
|
|
mutex_unlock(&_rdev->mutex);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* regulator_bulk_get - get multiple regulator consumers
|
|
*
|
|
* @dev: Device to supply
|
|
* @num_consumers: Number of consumers to register
|
|
* @consumers: Configuration of consumers; clients are stored here.
|
|
*
|
|
* @return 0 on success, an errno on failure.
|
|
*
|
|
* This helper function allows drivers to get several regulator
|
|
* consumers in one operation. If any of the regulators cannot be
|
|
* acquired then any regulators that were allocated will be freed
|
|
* before returning to the caller.
|
|
*/
|
|
int regulator_bulk_get(struct device *dev, int num_consumers,
|
|
struct regulator_bulk_data *consumers)
|
|
{
|
|
int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < num_consumers; i++)
|
|
consumers[i].consumer = NULL;
|
|
|
|
for (i = 0; i < num_consumers; i++) {
|
|
consumers[i].consumer = regulator_get(dev,
|
|
consumers[i].supply);
|
|
if (IS_ERR(consumers[i].consumer)) {
|
|
dev_err(dev, "Failed to get supply '%s'\n",
|
|
consumers[i].supply);
|
|
ret = PTR_ERR(consumers[i].consumer);
|
|
consumers[i].consumer = NULL;
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
for (i = 0; i < num_consumers && consumers[i].consumer; i++)
|
|
regulator_put(consumers[i].consumer);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_bulk_get);
|
|
|
|
/**
|
|
* regulator_bulk_enable - enable multiple regulator consumers
|
|
*
|
|
* @num_consumers: Number of consumers
|
|
* @consumers: Consumer data; clients are stored here.
|
|
* @return 0 on success, an errno on failure
|
|
*
|
|
* This convenience API allows consumers to enable multiple regulator
|
|
* clients in a single API call. If any consumers cannot be enabled
|
|
* then any others that were enabled will be disabled again prior to
|
|
* return.
|
|
*/
|
|
int regulator_bulk_enable(int num_consumers,
|
|
struct regulator_bulk_data *consumers)
|
|
{
|
|
int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < num_consumers; i++) {
|
|
ret = regulator_enable(consumers[i].consumer);
|
|
if (ret != 0)
|
|
goto err;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
printk(KERN_ERR "Failed to enable %s\n", consumers[i].supply);
|
|
for (i = 0; i < num_consumers; i++)
|
|
regulator_disable(consumers[i].consumer);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_bulk_enable);
|
|
|
|
/**
|
|
* regulator_bulk_disable - disable multiple regulator consumers
|
|
*
|
|
* @num_consumers: Number of consumers
|
|
* @consumers: Consumer data; clients are stored here.
|
|
* @return 0 on success, an errno on failure
|
|
*
|
|
* This convenience API allows consumers to disable multiple regulator
|
|
* clients in a single API call. If any consumers cannot be enabled
|
|
* then any others that were disabled will be disabled again prior to
|
|
* return.
|
|
*/
|
|
int regulator_bulk_disable(int num_consumers,
|
|
struct regulator_bulk_data *consumers)
|
|
{
|
|
int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < num_consumers; i++) {
|
|
ret = regulator_disable(consumers[i].consumer);
|
|
if (ret != 0)
|
|
goto err;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
printk(KERN_ERR "Failed to disable %s\n", consumers[i].supply);
|
|
for (i = 0; i < num_consumers; i++)
|
|
regulator_enable(consumers[i].consumer);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_bulk_disable);
|
|
|
|
/**
|
|
* regulator_bulk_free - free multiple regulator consumers
|
|
*
|
|
* @num_consumers: Number of consumers
|
|
* @consumers: Consumer data; clients are stored here.
|
|
*
|
|
* This convenience API allows consumers to free multiple regulator
|
|
* clients in a single API call.
|
|
*/
|
|
void regulator_bulk_free(int num_consumers,
|
|
struct regulator_bulk_data *consumers)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < num_consumers; i++) {
|
|
regulator_put(consumers[i].consumer);
|
|
consumers[i].consumer = NULL;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_bulk_free);
|
|
|
|
/**
|
|
* regulator_notifier_call_chain - call regulator event notifier
|
|
* @rdev: regulator source
|
|
* @event: notifier block
|
|
* @data: callback-specific data.
|
|
*
|
|
* Called by regulator drivers to notify clients a regulator event has
|
|
* occurred. We also notify regulator clients downstream.
|
|
* Note lock must be held by caller.
|
|
*/
|
|
int regulator_notifier_call_chain(struct regulator_dev *rdev,
|
|
unsigned long event, void *data)
|
|
{
|
|
_notifier_call_chain(rdev, event, data);
|
|
return NOTIFY_DONE;
|
|
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_notifier_call_chain);
|
|
|
|
/*
|
|
* To avoid cluttering sysfs (and memory) with useless state, only
|
|
* create attributes that can be meaningfully displayed.
|
|
*/
|
|
static int add_regulator_attributes(struct regulator_dev *rdev)
|
|
{
|
|
struct device *dev = &rdev->dev;
|
|
struct regulator_ops *ops = rdev->desc->ops;
|
|
int status = 0;
|
|
|
|
/* some attributes need specific methods to be displayed */
|
|
if (ops->get_voltage) {
|
|
status = device_create_file(dev, &dev_attr_microvolts);
|
|
if (status < 0)
|
|
return status;
|
|
}
|
|
if (ops->get_current_limit) {
|
|
status = device_create_file(dev, &dev_attr_microamps);
|
|
if (status < 0)
|
|
return status;
|
|
}
|
|
if (ops->get_mode) {
|
|
status = device_create_file(dev, &dev_attr_opmode);
|
|
if (status < 0)
|
|
return status;
|
|
}
|
|
if (ops->is_enabled) {
|
|
status = device_create_file(dev, &dev_attr_state);
|
|
if (status < 0)
|
|
return status;
|
|
}
|
|
if (ops->get_status) {
|
|
status = device_create_file(dev, &dev_attr_status);
|
|
if (status < 0)
|
|
return status;
|
|
}
|
|
|
|
/* some attributes are type-specific */
|
|
if (rdev->desc->type == REGULATOR_CURRENT) {
|
|
status = device_create_file(dev, &dev_attr_requested_microamps);
|
|
if (status < 0)
|
|
return status;
|
|
}
|
|
|
|
/* all the other attributes exist to support constraints;
|
|
* don't show them if there are no constraints, or if the
|
|
* relevant supporting methods are missing.
|
|
*/
|
|
if (!rdev->constraints)
|
|
return status;
|
|
|
|
/* constraints need specific supporting methods */
|
|
if (ops->set_voltage) {
|
|
status = device_create_file(dev, &dev_attr_min_microvolts);
|
|
if (status < 0)
|
|
return status;
|
|
status = device_create_file(dev, &dev_attr_max_microvolts);
|
|
if (status < 0)
|
|
return status;
|
|
}
|
|
if (ops->set_current_limit) {
|
|
status = device_create_file(dev, &dev_attr_min_microamps);
|
|
if (status < 0)
|
|
return status;
|
|
status = device_create_file(dev, &dev_attr_max_microamps);
|
|
if (status < 0)
|
|
return status;
|
|
}
|
|
|
|
/* suspend mode constraints need multiple supporting methods */
|
|
if (!(ops->set_suspend_enable && ops->set_suspend_disable))
|
|
return status;
|
|
|
|
status = device_create_file(dev, &dev_attr_suspend_standby_state);
|
|
if (status < 0)
|
|
return status;
|
|
status = device_create_file(dev, &dev_attr_suspend_mem_state);
|
|
if (status < 0)
|
|
return status;
|
|
status = device_create_file(dev, &dev_attr_suspend_disk_state);
|
|
if (status < 0)
|
|
return status;
|
|
|
|
if (ops->set_suspend_voltage) {
|
|
status = device_create_file(dev,
|
|
&dev_attr_suspend_standby_microvolts);
|
|
if (status < 0)
|
|
return status;
|
|
status = device_create_file(dev,
|
|
&dev_attr_suspend_mem_microvolts);
|
|
if (status < 0)
|
|
return status;
|
|
status = device_create_file(dev,
|
|
&dev_attr_suspend_disk_microvolts);
|
|
if (status < 0)
|
|
return status;
|
|
}
|
|
|
|
if (ops->set_suspend_mode) {
|
|
status = device_create_file(dev,
|
|
&dev_attr_suspend_standby_mode);
|
|
if (status < 0)
|
|
return status;
|
|
status = device_create_file(dev,
|
|
&dev_attr_suspend_mem_mode);
|
|
if (status < 0)
|
|
return status;
|
|
status = device_create_file(dev,
|
|
&dev_attr_suspend_disk_mode);
|
|
if (status < 0)
|
|
return status;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* regulator_register - register regulator
|
|
* @regulator_desc: regulator to register
|
|
* @dev: struct device for the regulator
|
|
* @init_data: platform provided init data, passed through by driver
|
|
* @driver_data: private regulator data
|
|
*
|
|
* Called by regulator drivers to register a regulator.
|
|
* Returns 0 on success.
|
|
*/
|
|
struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
|
|
struct device *dev, struct regulator_init_data *init_data,
|
|
void *driver_data)
|
|
{
|
|
static atomic_t regulator_no = ATOMIC_INIT(0);
|
|
struct regulator_dev *rdev;
|
|
int ret, i;
|
|
|
|
if (regulator_desc == NULL)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
if (regulator_desc->name == NULL || regulator_desc->ops == NULL)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
if (regulator_desc->type != REGULATOR_VOLTAGE &&
|
|
regulator_desc->type != REGULATOR_CURRENT)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
if (!init_data)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
rdev = kzalloc(sizeof(struct regulator_dev), GFP_KERNEL);
|
|
if (rdev == NULL)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
mutex_lock(®ulator_list_mutex);
|
|
|
|
mutex_init(&rdev->mutex);
|
|
rdev->reg_data = driver_data;
|
|
rdev->owner = regulator_desc->owner;
|
|
rdev->desc = regulator_desc;
|
|
INIT_LIST_HEAD(&rdev->consumer_list);
|
|
INIT_LIST_HEAD(&rdev->supply_list);
|
|
INIT_LIST_HEAD(&rdev->list);
|
|
INIT_LIST_HEAD(&rdev->slist);
|
|
BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier);
|
|
|
|
/* preform any regulator specific init */
|
|
if (init_data->regulator_init) {
|
|
ret = init_data->regulator_init(rdev->reg_data);
|
|
if (ret < 0)
|
|
goto clean;
|
|
}
|
|
|
|
/* register with sysfs */
|
|
rdev->dev.class = ®ulator_class;
|
|
rdev->dev.parent = dev;
|
|
dev_set_name(&rdev->dev, "regulator.%d",
|
|
atomic_inc_return(®ulator_no) - 1);
|
|
ret = device_register(&rdev->dev);
|
|
if (ret != 0)
|
|
goto clean;
|
|
|
|
dev_set_drvdata(&rdev->dev, rdev);
|
|
|
|
/* set regulator constraints */
|
|
ret = set_machine_constraints(rdev, &init_data->constraints);
|
|
if (ret < 0)
|
|
goto scrub;
|
|
|
|
/* add attributes supported by this regulator */
|
|
ret = add_regulator_attributes(rdev);
|
|
if (ret < 0)
|
|
goto scrub;
|
|
|
|
/* set supply regulator if it exists */
|
|
if (init_data->supply_regulator_dev) {
|
|
ret = set_supply(rdev,
|
|
dev_get_drvdata(init_data->supply_regulator_dev));
|
|
if (ret < 0)
|
|
goto scrub;
|
|
}
|
|
|
|
/* add consumers devices */
|
|
for (i = 0; i < init_data->num_consumer_supplies; i++) {
|
|
ret = set_consumer_device_supply(rdev,
|
|
init_data->consumer_supplies[i].dev,
|
|
init_data->consumer_supplies[i].supply);
|
|
if (ret < 0) {
|
|
for (--i; i >= 0; i--)
|
|
unset_consumer_device_supply(rdev,
|
|
init_data->consumer_supplies[i].dev);
|
|
goto scrub;
|
|
}
|
|
}
|
|
|
|
list_add(&rdev->list, ®ulator_list);
|
|
out:
|
|
mutex_unlock(®ulator_list_mutex);
|
|
return rdev;
|
|
|
|
scrub:
|
|
device_unregister(&rdev->dev);
|
|
/* device core frees rdev */
|
|
rdev = ERR_PTR(ret);
|
|
goto out;
|
|
|
|
clean:
|
|
kfree(rdev);
|
|
rdev = ERR_PTR(ret);
|
|
goto out;
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_register);
|
|
|
|
/**
|
|
* regulator_unregister - unregister regulator
|
|
* @rdev: regulator to unregister
|
|
*
|
|
* Called by regulator drivers to unregister a regulator.
|
|
*/
|
|
void regulator_unregister(struct regulator_dev *rdev)
|
|
{
|
|
if (rdev == NULL)
|
|
return;
|
|
|
|
mutex_lock(®ulator_list_mutex);
|
|
unset_regulator_supplies(rdev);
|
|
list_del(&rdev->list);
|
|
if (rdev->supply)
|
|
sysfs_remove_link(&rdev->dev.kobj, "supply");
|
|
device_unregister(&rdev->dev);
|
|
mutex_unlock(®ulator_list_mutex);
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_unregister);
|
|
|
|
/**
|
|
* regulator_suspend_prepare - prepare regulators for system wide suspend
|
|
* @state: system suspend state
|
|
*
|
|
* Configure each regulator with it's suspend operating parameters for state.
|
|
* This will usually be called by machine suspend code prior to supending.
|
|
*/
|
|
int regulator_suspend_prepare(suspend_state_t state)
|
|
{
|
|
struct regulator_dev *rdev;
|
|
int ret = 0;
|
|
|
|
/* ON is handled by regulator active state */
|
|
if (state == PM_SUSPEND_ON)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(®ulator_list_mutex);
|
|
list_for_each_entry(rdev, ®ulator_list, list) {
|
|
|
|
mutex_lock(&rdev->mutex);
|
|
ret = suspend_prepare(rdev, state);
|
|
mutex_unlock(&rdev->mutex);
|
|
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "%s: failed to prepare %s\n",
|
|
__func__, rdev->desc->name);
|
|
goto out;
|
|
}
|
|
}
|
|
out:
|
|
mutex_unlock(®ulator_list_mutex);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_suspend_prepare);
|
|
|
|
/**
|
|
* regulator_has_full_constraints - the system has fully specified constraints
|
|
*
|
|
* Calling this function will cause the regulator API to disable all
|
|
* regulators which have a zero use count and don't have an always_on
|
|
* constraint in a late_initcall.
|
|
*
|
|
* The intention is that this will become the default behaviour in a
|
|
* future kernel release so users are encouraged to use this facility
|
|
* now.
|
|
*/
|
|
void regulator_has_full_constraints(void)
|
|
{
|
|
has_full_constraints = 1;
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_has_full_constraints);
|
|
|
|
/**
|
|
* rdev_get_drvdata - get rdev regulator driver data
|
|
* @rdev: regulator
|
|
*
|
|
* Get rdev regulator driver private data. This call can be used in the
|
|
* regulator driver context.
|
|
*/
|
|
void *rdev_get_drvdata(struct regulator_dev *rdev)
|
|
{
|
|
return rdev->reg_data;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rdev_get_drvdata);
|
|
|
|
/**
|
|
* regulator_get_drvdata - get regulator driver data
|
|
* @regulator: regulator
|
|
*
|
|
* Get regulator driver private data. This call can be used in the consumer
|
|
* driver context when non API regulator specific functions need to be called.
|
|
*/
|
|
void *regulator_get_drvdata(struct regulator *regulator)
|
|
{
|
|
return regulator->rdev->reg_data;
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_get_drvdata);
|
|
|
|
/**
|
|
* regulator_set_drvdata - set regulator driver data
|
|
* @regulator: regulator
|
|
* @data: data
|
|
*/
|
|
void regulator_set_drvdata(struct regulator *regulator, void *data)
|
|
{
|
|
regulator->rdev->reg_data = data;
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_set_drvdata);
|
|
|
|
/**
|
|
* regulator_get_id - get regulator ID
|
|
* @rdev: regulator
|
|
*/
|
|
int rdev_get_id(struct regulator_dev *rdev)
|
|
{
|
|
return rdev->desc->id;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rdev_get_id);
|
|
|
|
struct device *rdev_get_dev(struct regulator_dev *rdev)
|
|
{
|
|
return &rdev->dev;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rdev_get_dev);
|
|
|
|
void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data)
|
|
{
|
|
return reg_init_data->driver_data;
|
|
}
|
|
EXPORT_SYMBOL_GPL(regulator_get_init_drvdata);
|
|
|
|
static int __init regulator_init(void)
|
|
{
|
|
printk(KERN_INFO "regulator: core version %s\n", REGULATOR_VERSION);
|
|
return class_register(®ulator_class);
|
|
}
|
|
|
|
/* init early to allow our consumers to complete system booting */
|
|
core_initcall(regulator_init);
|
|
|
|
static int __init regulator_init_complete(void)
|
|
{
|
|
struct regulator_dev *rdev;
|
|
struct regulator_ops *ops;
|
|
struct regulation_constraints *c;
|
|
int enabled, ret;
|
|
const char *name;
|
|
|
|
mutex_lock(®ulator_list_mutex);
|
|
|
|
/* If we have a full configuration then disable any regulators
|
|
* which are not in use or always_on. This will become the
|
|
* default behaviour in the future.
|
|
*/
|
|
list_for_each_entry(rdev, ®ulator_list, list) {
|
|
ops = rdev->desc->ops;
|
|
c = rdev->constraints;
|
|
|
|
if (c->name)
|
|
name = c->name;
|
|
else if (rdev->desc->name)
|
|
name = rdev->desc->name;
|
|
else
|
|
name = "regulator";
|
|
|
|
if (!ops->disable || c->always_on)
|
|
continue;
|
|
|
|
mutex_lock(&rdev->mutex);
|
|
|
|
if (rdev->use_count)
|
|
goto unlock;
|
|
|
|
/* If we can't read the status assume it's on. */
|
|
if (ops->is_enabled)
|
|
enabled = ops->is_enabled(rdev);
|
|
else
|
|
enabled = 1;
|
|
|
|
if (!enabled)
|
|
goto unlock;
|
|
|
|
if (has_full_constraints) {
|
|
/* We log since this may kill the system if it
|
|
* goes wrong. */
|
|
printk(KERN_INFO "%s: disabling %s\n",
|
|
__func__, name);
|
|
ret = ops->disable(rdev);
|
|
if (ret != 0) {
|
|
printk(KERN_ERR
|
|
"%s: couldn't disable %s: %d\n",
|
|
__func__, name, ret);
|
|
}
|
|
} else {
|
|
/* The intention is that in future we will
|
|
* assume that full constraints are provided
|
|
* so warn even if we aren't going to do
|
|
* anything here.
|
|
*/
|
|
printk(KERN_WARNING
|
|
"%s: incomplete constraints, leaving %s on\n",
|
|
__func__, name);
|
|
}
|
|
|
|
unlock:
|
|
mutex_unlock(&rdev->mutex);
|
|
}
|
|
|
|
mutex_unlock(®ulator_list_mutex);
|
|
|
|
return 0;
|
|
}
|
|
late_initcall(regulator_init_complete);
|