linux/sound/soc/qcom/sm8250.c
Dmitry Baryshkov ddf1c4b394
ASoC: qcom: sm8250: fix HDMI audio playback
Current code does not setup CPU dai (causing -EIO errors on playback)
and does not pass SND_SOC_DAIFMT_I2S to codec fmt (causing i2s-hifi
errors). Fix both errors to enable HDMI audio playback on SM8250. Tested
on RB5 platform.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: aa2e278554 ("ASoC: qcom: sm8250: add sound card qrb5165-rb5 support")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201119123145.709891-1-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-20 16:08:38 +00:00

230 lines
5.8 KiB
C

// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2020, Linaro Limited
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of_device.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <sound/pcm.h>
#include <linux/soundwire/sdw.h>
#include "qdsp6/q6afe.h"
#include "common.h"
#define DRIVER_NAME "sm8250"
#define MI2S_BCLK_RATE 1536000
struct sm8250_snd_data {
bool stream_prepared[AFE_PORT_MAX];
struct snd_soc_card *card;
struct sdw_stream_runtime *sruntime[AFE_PORT_MAX];
};
static int sm8250_be_hw_params_fixup(struct snd_soc_pcm_runtime *rtd,
struct snd_pcm_hw_params *params)
{
struct snd_interval *rate = hw_param_interval(params,
SNDRV_PCM_HW_PARAM_RATE);
struct snd_interval *channels = hw_param_interval(params,
SNDRV_PCM_HW_PARAM_CHANNELS);
rate->min = rate->max = 48000;
channels->min = channels->max = 2;
return 0;
}
static int sm8250_snd_startup(struct snd_pcm_substream *substream)
{
unsigned int fmt = SND_SOC_DAIFMT_CBS_CFS;
unsigned int codec_dai_fmt = SND_SOC_DAIFMT_CBS_CFS;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
switch (cpu_dai->id) {
case TERTIARY_MI2S_RX:
codec_dai_fmt |= SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_I2S;
snd_soc_dai_set_sysclk(cpu_dai,
Q6AFE_LPASS_CLK_ID_TER_MI2S_IBIT,
MI2S_BCLK_RATE, SNDRV_PCM_STREAM_PLAYBACK);
snd_soc_dai_set_fmt(cpu_dai, fmt);
snd_soc_dai_set_fmt(codec_dai, codec_dai_fmt);
break;
default:
break;
}
return 0;
}
static int sm8250_snd_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai;
struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
struct sm8250_snd_data *pdata = snd_soc_card_get_drvdata(rtd->card);
struct sdw_stream_runtime *sruntime;
int i;
switch (cpu_dai->id) {
case WSA_CODEC_DMA_RX_0:
for_each_rtd_codec_dais(rtd, i, codec_dai) {
sruntime = snd_soc_dai_get_sdw_stream(codec_dai,
substream->stream);
if (sruntime != ERR_PTR(-ENOTSUPP))
pdata->sruntime[cpu_dai->id] = sruntime;
}
break;
}
return 0;
}
static int sm8250_snd_wsa_dma_prepare(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
struct sm8250_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id];
int ret;
if (!sruntime)
return 0;
if (data->stream_prepared[cpu_dai->id]) {
sdw_disable_stream(sruntime);
sdw_deprepare_stream(sruntime);
data->stream_prepared[cpu_dai->id] = false;
}
ret = sdw_prepare_stream(sruntime);
if (ret)
return ret;
/**
* NOTE: there is a strict hw requirement about the ordering of port
* enables and actual WSA881x PA enable. PA enable should only happen
* after soundwire ports are enabled if not DC on the line is
* accumulated resulting in Click/Pop Noise
* PA enable/mute are handled as part of codec DAPM and digital mute.
*/
ret = sdw_enable_stream(sruntime);
if (ret) {
sdw_deprepare_stream(sruntime);
return ret;
}
data->stream_prepared[cpu_dai->id] = true;
return ret;
}
static int sm8250_snd_prepare(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
switch (cpu_dai->id) {
case WSA_CODEC_DMA_RX_0:
case WSA_CODEC_DMA_RX_1:
return sm8250_snd_wsa_dma_prepare(substream);
default:
break;
}
return 0;
}
static int sm8250_snd_hw_free(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct sm8250_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id];
switch (cpu_dai->id) {
case WSA_CODEC_DMA_RX_0:
case WSA_CODEC_DMA_RX_1:
if (sruntime && data->stream_prepared[cpu_dai->id]) {
sdw_disable_stream(sruntime);
sdw_deprepare_stream(sruntime);
data->stream_prepared[cpu_dai->id] = false;
}
break;
default:
break;
}
return 0;
}
static const struct snd_soc_ops sm8250_be_ops = {
.startup = sm8250_snd_startup,
.hw_params = sm8250_snd_hw_params,
.hw_free = sm8250_snd_hw_free,
.prepare = sm8250_snd_prepare,
};
static void sm8250_add_be_ops(struct snd_soc_card *card)
{
struct snd_soc_dai_link *link;
int i;
for_each_card_prelinks(card, i, link) {
if (link->no_pcm == 1) {
link->be_hw_params_fixup = sm8250_be_hw_params_fixup;
link->ops = &sm8250_be_ops;
}
}
}
static int sm8250_platform_probe(struct platform_device *pdev)
{
struct snd_soc_card *card;
struct sm8250_snd_data *data;
struct device *dev = &pdev->dev;
int ret;
card = devm_kzalloc(dev, sizeof(*card), GFP_KERNEL);
if (!card)
return -ENOMEM;
/* Allocate the private data */
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
card->dev = dev;
dev_set_drvdata(dev, card);
snd_soc_card_set_drvdata(card, data);
ret = qcom_snd_parse_of(card);
if (ret)
return ret;
card->driver_name = DRIVER_NAME;
sm8250_add_be_ops(card);
return devm_snd_soc_register_card(dev, card);
}
static const struct of_device_id snd_sm8250_dt_match[] = {
{.compatible = "qcom,sm8250-sndcard"},
{.compatible = "qcom,qrb5165-rb5-sndcard"},
{}
};
MODULE_DEVICE_TABLE(of, snd_sm8250_dt_match);
static struct platform_driver snd_sm8250_driver = {
.probe = sm8250_platform_probe,
.driver = {
.name = "snd-sm8250",
.of_match_table = snd_sm8250_dt_match,
},
};
module_platform_driver(snd_sm8250_driver);
MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla@linaro.org");
MODULE_DESCRIPTION("SM8250 ASoC Machine Driver");
MODULE_LICENSE("GPL v2");