linux/drivers/usb/phy/phy-generic.c
Felipe Balbi 2f36ff6915 usb: phy: generic: allow multiples calls to usb_phy_generic_register()
it's now very easy to return a platform_device pointer
and have the caller pass it as argument when calling
usb_phy_generic_unregister().

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21 14:07:25 -05:00

310 lines
7.0 KiB
C

/*
* drivers/usb/otg/nop-usb-xceiv.c
*
* NOP USB transceiver for all USB transceiver which are either built-in
* into USB IP or which are mostly autonomous.
*
* Copyright (C) 2009 Texas Instruments Inc
* Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Current status:
* This provides a "nop" transceiver for PHYs which are
* autonomous such as isp1504, isp1707, etc.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/usb/otg.h>
#include <linux/usb/usb_phy_generic.h>
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/regulator/consumer.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include "phy-generic.h"
struct platform_device *usb_phy_generic_register(void)
{
return platform_device_register_simple("usb_phy_generic",
PLATFORM_DEVID_AUTO, NULL, 0);
}
EXPORT_SYMBOL_GPL(usb_phy_generic_register);
void usb_phy_generic_unregister(struct platform_device *pdev)
{
platform_device_unregister(pdev);
}
EXPORT_SYMBOL_GPL(usb_phy_generic_unregister);
static int nop_set_suspend(struct usb_phy *x, int suspend)
{
return 0;
}
static void nop_reset_set(struct usb_phy_generic *nop, int asserted)
{
int value;
if (!gpio_is_valid(nop->gpio_reset))
return;
value = asserted;
if (nop->reset_active_low)
value = !value;
gpio_set_value_cansleep(nop->gpio_reset, value);
if (!asserted)
usleep_range(10000, 20000);
}
int usb_gen_phy_init(struct usb_phy *phy)
{
struct usb_phy_generic *nop = dev_get_drvdata(phy->dev);
if (!IS_ERR(nop->vcc)) {
if (regulator_enable(nop->vcc))
dev_err(phy->dev, "Failed to enable power\n");
}
if (!IS_ERR(nop->clk))
clk_prepare_enable(nop->clk);
/* De-assert RESET */
nop_reset_set(nop, 0);
return 0;
}
EXPORT_SYMBOL_GPL(usb_gen_phy_init);
void usb_gen_phy_shutdown(struct usb_phy *phy)
{
struct usb_phy_generic *nop = dev_get_drvdata(phy->dev);
/* Assert RESET */
nop_reset_set(nop, 1);
if (!IS_ERR(nop->clk))
clk_disable_unprepare(nop->clk);
if (!IS_ERR(nop->vcc)) {
if (regulator_disable(nop->vcc))
dev_err(phy->dev, "Failed to disable power\n");
}
}
EXPORT_SYMBOL_GPL(usb_gen_phy_shutdown);
static int nop_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
{
if (!otg)
return -ENODEV;
if (!gadget) {
otg->gadget = NULL;
return -ENODEV;
}
otg->gadget = gadget;
otg->phy->state = OTG_STATE_B_IDLE;
return 0;
}
static int nop_set_host(struct usb_otg *otg, struct usb_bus *host)
{
if (!otg)
return -ENODEV;
if (!host) {
otg->host = NULL;
return -ENODEV;
}
otg->host = host;
return 0;
}
int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
struct usb_phy_generic_platform_data *pdata)
{
enum usb_phy_type type = USB_PHY_TYPE_USB2;
int err;
u32 clk_rate = 0;
bool needs_vcc = false;
nop->reset_active_low = true; /* default behaviour */
if (dev->of_node) {
struct device_node *node = dev->of_node;
enum of_gpio_flags flags = 0;
if (of_property_read_u32(node, "clock-frequency", &clk_rate))
clk_rate = 0;
needs_vcc = of_property_read_bool(node, "vcc-supply");
nop->gpio_reset = of_get_named_gpio_flags(node, "reset-gpios",
0, &flags);
if (nop->gpio_reset == -EPROBE_DEFER)
return -EPROBE_DEFER;
nop->reset_active_low = flags & OF_GPIO_ACTIVE_LOW;
} else if (pdata) {
type = pdata->type;
clk_rate = pdata->clk_rate;
needs_vcc = pdata->needs_vcc;
nop->gpio_reset = pdata->gpio_reset;
} else {
nop->gpio_reset = -1;
}
nop->phy.otg = devm_kzalloc(dev, sizeof(*nop->phy.otg),
GFP_KERNEL);
if (!nop->phy.otg)
return -ENOMEM;
nop->clk = devm_clk_get(dev, "main_clk");
if (IS_ERR(nop->clk)) {
dev_dbg(dev, "Can't get phy clock: %ld\n",
PTR_ERR(nop->clk));
}
if (!IS_ERR(nop->clk) && clk_rate) {
err = clk_set_rate(nop->clk, clk_rate);
if (err) {
dev_err(dev, "Error setting clock rate\n");
return err;
}
}
nop->vcc = devm_regulator_get(dev, "vcc");
if (IS_ERR(nop->vcc)) {
dev_dbg(dev, "Error getting vcc regulator: %ld\n",
PTR_ERR(nop->vcc));
if (needs_vcc)
return -EPROBE_DEFER;
}
if (gpio_is_valid(nop->gpio_reset)) {
unsigned long gpio_flags;
/* Assert RESET */
if (nop->reset_active_low)
gpio_flags = GPIOF_OUT_INIT_LOW;
else
gpio_flags = GPIOF_OUT_INIT_HIGH;
err = devm_gpio_request_one(dev, nop->gpio_reset,
gpio_flags, dev_name(dev));
if (err) {
dev_err(dev, "Error requesting RESET GPIO %d\n",
nop->gpio_reset);
return err;
}
}
nop->dev = dev;
nop->phy.dev = nop->dev;
nop->phy.label = "nop-xceiv";
nop->phy.set_suspend = nop_set_suspend;
nop->phy.state = OTG_STATE_UNDEFINED;
nop->phy.type = type;
nop->phy.otg->phy = &nop->phy;
nop->phy.otg->set_host = nop_set_host;
nop->phy.otg->set_peripheral = nop_set_peripheral;
return 0;
}
EXPORT_SYMBOL_GPL(usb_phy_gen_create_phy);
static int usb_phy_generic_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct usb_phy_generic *nop;
int err;
nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL);
if (!nop)
return -ENOMEM;
err = usb_phy_gen_create_phy(dev, nop, dev_get_platdata(&pdev->dev));
if (err)
return err;
nop->phy.init = usb_gen_phy_init;
nop->phy.shutdown = usb_gen_phy_shutdown;
err = usb_add_phy_dev(&nop->phy);
if (err) {
dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
err);
return err;
}
platform_set_drvdata(pdev, nop);
return 0;
}
static int usb_phy_generic_remove(struct platform_device *pdev)
{
struct usb_phy_generic *nop = platform_get_drvdata(pdev);
usb_remove_phy(&nop->phy);
return 0;
}
static const struct of_device_id nop_xceiv_dt_ids[] = {
{ .compatible = "usb-nop-xceiv" },
{ }
};
MODULE_DEVICE_TABLE(of, nop_xceiv_dt_ids);
static struct platform_driver usb_phy_generic_driver = {
.probe = usb_phy_generic_probe,
.remove = usb_phy_generic_remove,
.driver = {
.name = "usb_phy_generic",
.owner = THIS_MODULE,
.of_match_table = nop_xceiv_dt_ids,
},
};
static int __init usb_phy_generic_init(void)
{
return platform_driver_register(&usb_phy_generic_driver);
}
subsys_initcall(usb_phy_generic_init);
static void __exit usb_phy_generic_exit(void)
{
platform_driver_unregister(&usb_phy_generic_driver);
}
module_exit(usb_phy_generic_exit);
MODULE_ALIAS("platform:usb_phy_generic");
MODULE_AUTHOR("Texas Instruments Inc");
MODULE_DESCRIPTION("NOP USB Transceiver driver");
MODULE_LICENSE("GPL");