linux/arch/arm64/boot/dts/freescale
Linus Torvalds 854e80bcfd ARM: devicetree updates for v5.7
Most of the commits are for additional hardware support and minor fixes
 for existing machines for all the usual platforms: qcom, amlogic, at91,
 gemini, mediatek, ti, socfpga, i.mx, layerscape, uniphier, rockchip,
 exynos, ux500, mvebu, tegra, stm32, renesas, sunxi, broadcom, omap,
 and versatile.
 
 The conversion of binding files to machine-readable yaml format
 continues, along with fixes found during the validation.
 Andre Przywara takes over maintainership for the old Calxeda Highbank
 platform and provides a number of updates.
 
 The OMAP2+ platforms see a continued move from platform data into
 dts files, for many devices that relied on a mix of auxiliary data
 in addition to the DT description
 
 A moderate number of new SoCs and machines are added, here is a full
 list:
 
 - Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865
   (SM8250) is the current high-end phone chip, and IPQ6018 is a new
   WiFi-6 router chip.
 
 - Mediatek MT8516 application processor SoC for voice assistants, along
   with the "pumpkin" development board
 
 - NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an
   evaluation board.
 
 - Kontron "sl28" board family based on NXP LS1028A
 
 - Eleven variations of the new i.MX6 TechNexion Pico board, combining
   the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7
   SoM carriers
 
 - Three additional variants of the Toradex Colibri board family, all
   based on versions of the NXP i.MX7.
 
 - The Pinebook Pro laptop based on Rockchip RK3399
 
 - Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based on
   the ST-Ericsson u8500 platform
 
 - DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on
   STMicroelectronics stm32mp157
 
 - Renesas M3ULCB starter kit for R-Car M3-W+
 
 - Hoperun HiHope development board with Renesas RZ/G2M
 
 - Pine64 PineTab tablet and PinePhone phone, both based on Allwinner A64
 
 - Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner A20
 
 - PocketBook Touch Lux 3 ebook reader, based on Allwinner A13
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl6HpMkACgkQmmx57+YA
 GNkGsQ/+KRbE74XGQvZww5PleaesqoZZhrt2gbi0pEJZ/JTgNa3dBkT+JwlToe/H
 x7nFVfMZeEl4O9GO0+/CH2tsmQa5BA8R9JddhFxwnZ48ZYLQAdaukwt94LM2zj3K
 GFgs47N4DAAF5QJoXNtmmQCXUWbj7A/0S5TTpXe94TYPN9XiJCdsyNNLpW3undTe
 K1HLnd4yWGforQc/VfRsV/Gsqi1VNHgL34M3belahiG7x0lytJDCHfhsfmIdxdGR
 n3LVRRJr6NhKcuUw3XtA8MxT4dTAcgHjbbDLkS/b1nHfuXMi0/zW8VPBzD/xyHL7
 fbFl8ayUMANB6FD/U7ptUC/0IMXuHDUn4B60CEEzK8ddkEbErrmXlYVGogpFHxvm
 MqrW8CnO0YEr0YMNAIyZoqHYGq8+8DCq+SRH48brdPzuiKI6OahdV1o07ulGhOjq
 ihwoZNE+J0NjeaX7C1xBX3DT1XqdcNPCmu3gx6r06u2FVXVm1J19YkIzQnEXQvKy
 NRIw5LIOfEsxkMSQ0oUuAUUUY1Fq1zuHqD8MmgBd3jqIULQqgfahmPL6Dtwm5QFf
 R17YsMcQ7ae1Pp7a+D3Jrkbn+s2y8wmJZIqH3eWebps9RvpWmrxzsRfOJ2czhqM1
 NY7Z/TGMM7lGM75DZ+xskfk7UCAX+hqMSTiNg9xbRo8946GAbV4=
 =ye2F
 -----END PGP SIGNATURE-----

Merge tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM devicetree updates from Arnd Bergmann:
 "Most of the commits are for additional hardware support and minor
  fixes for existing machines for all the usual platforms: qcom,
  amlogic, at91, gemini, mediatek, ti, socfpga, i.mx, layerscape,
  uniphier, rockchip, exynos, ux500, mvebu, tegra, stm32, renesas,
  sunxi, broadcom, omap, and versatile.

  The conversion of binding files to machine-readable yaml format
  continues, along with fixes found during the validation. Andre
  Przywara takes over maintainership for the old Calxeda Highbank
  platform and provides a number of updates.

  The OMAP2+ platforms see a continued move from platform data into dts
  files, for many devices that relied on a mix of auxiliary data in
  addition to the DT description

  A moderate number of new SoCs and machines are added, here is a full
  list:

   - Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865
     (SM8250) is the current high-end phone chip, and IPQ6018 is a new
     WiFi-6 router chip.

   - Mediatek MT8516 application processor SoC for voice assistants,
     along with the "pumpkin" development board

   - NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an
     evaluation board.

   - Kontron "sl28" board family based on NXP LS1028A

   - Eleven variations of the new i.MX6 TechNexion Pico board, combining
     the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7
     SoM carriers

   - Three additional variants of the Toradex Colibri board family, all
     based on versions of the NXP i.MX7.

   - The Pinebook Pro laptop based on Rockchip RK3399

   - Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based
     on the ST-Ericsson u8500 platform

   - DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on
     STMicroelectronics stm32mp157

   - Renesas M3ULCB starter kit for R-Car M3-W+

   - Hoperun HiHope development board with Renesas RZ/G2M

   - Pine64 PineTab tablet and PinePhone phone, both based on Allwinner
     A64

   - Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner
     A20

   - PocketBook Touch Lux 3 ebook reader, based on Allwinner A13"

* tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (520 commits)
  ARM: dts: ux500: Fix missing node renames
  arm64: dts: Revert "specify console via command line"
  MAINTAINERS: Update Calxeda Highbank maintainership
  arm: dts: calxeda: Group port-phys and sgpio-gpio items
  arm: dts: calxeda: Fix interrupt grouping
  arm: dts: calxeda: Provide UART clock
  arm: dts: calxeda: Basic DT file fixes
  arm64: dts: specify console via command line
  ARM: dts: at91: sama5d27_wlsom1_ek: add USB device node
  ARM: dts: gemini: Add thermal zone to DIR-685
  ARM: dts: gemini: Rename IDE nodes
  ARM: socfpga: arria10: Add ptp_ref clock to ethernet nodes
  arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes
  arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node
  arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC
  arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0
  arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC
  arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes
  arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node
  arm64: dts: khadas-vim3: add SPIFC controller node
  ...
2020-04-03 15:22:05 -07:00
..
fsl-ls208xa-qds.dtsi arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller 2018-12-16 16:24:01 +08:00
fsl-ls208xa-rdb.dtsi arm64: dts: ls208xa: Update qspi node properties for LS2088ARDB 2020-01-09 15:32:29 +08:00
fsl-ls208xa.dtsi arm64: dts: layerscape: add iommu-map property to pci nodes 2020-03-11 16:15:48 +08:00
fsl-ls1012a-frdm.dts arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls1012a-frwy.dts arm64: dts: ls1012a: Add FRWY-LS1012A board support 2018-12-08 10:28:37 +08:00
fsl-ls1012a-oxalis.dts arm64: dts: freescale: Enable PCI-E controller for Oxalis board 2019-03-20 20:58:26 +08:00
fsl-ls1012a-qds.dts arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls1012a-rdb.dts arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls1012a.dtsi pci-v5.4-changes 2019-09-23 19:16:01 -07:00
fsl-ls1028a-kontron-kbox-a-230-ls.dts arm64: dts: ls1028a: disable the felix switch by default 2020-03-16 16:16:00 +08:00
fsl-ls1028a-kontron-sl28-var2.dts arm64: dts: ls1028a: disable the felix switch by default 2020-03-16 16:16:00 +08:00
fsl-ls1028a-kontron-sl28-var3-ads2.dts arm64: dts: ls1028a: sl28: fix on-board EEPROMS 2020-03-16 16:16:00 +08:00
fsl-ls1028a-kontron-sl28-var4.dts arm64: dts: ls1028: sl28: explicitly enable network ports 2020-03-11 15:58:13 +08:00
fsl-ls1028a-kontron-sl28.dts arm64: dts: ls1028a: sl28: fix on-board EEPROMS 2020-03-16 16:16:00 +08:00
fsl-ls1028a-qds.dts arm64: dts: ls1028a: disable all enetc ports by default 2020-03-11 15:58:13 +08:00
fsl-ls1028a-rdb.dts arm64: dts: ls1028a: disable the felix switch by default 2020-03-16 16:16:00 +08:00
fsl-ls1028a.dtsi ARM: devicetree updates for v5.7 2020-04-03 15:22:05 -07:00
fsl-ls1043-post.dtsi arm64: dts: ls1043a: FMan erratum A050385 2020-03-06 21:55:32 -08:00
fsl-ls1043a-qds.dts arm64: dts: fsl: use a generic node name for m25p80 flashes 2019-01-11 17:13:04 +08:00
fsl-ls1043a-rdb.dts arm64: dts: ls1043a-rdb: correct RGMII delay mode to rgmii-id 2020-03-16 14:58:32 -07:00
fsl-ls1043a.dtsi arm64: dts: fsl: Remove num-lanes property from PCIe nodes 2019-08-22 18:25:55 +01:00
fsl-ls1046-post.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls1046a-frwy.dts arm64: dts: ls1046a: Add QSPI node for ls1046afrwy 2019-12-11 11:13:37 +08:00
fsl-ls1046a-qds.dts arm64: dts: fsl: use a generic node name for m25p80 flashes 2019-01-11 17:13:04 +08:00
fsl-ls1046a-rdb.dts arm64: dts: ls1046ardb: set RGMII interfaces to RGMII_ID mode 2020-03-16 14:58:33 -07:00
fsl-ls1046a.dtsi arm64: dts: fsl: Remove num-lanes property from PCIe nodes 2019-08-22 18:25:55 +01:00
fsl-ls1088a-qds.dts arm64: dts: ls1088a: Add QSPI support for NXP LS1088 2019-12-11 11:13:44 +08:00
fsl-ls1088a-rdb.dts arm64: dts: ls1088a: support eMMC HS200 speed mode for RDB board 2020-02-14 11:39:40 +08:00
fsl-ls1088a.dtsi arm64: dts: layerscape: add iommu-map property to pci nodes 2020-03-11 16:15:48 +08:00
fsl-ls2080a-qds.dts arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls2080a-rdb.dts arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls2080a-simu.dts arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls2080a.dtsi arm64: dts: freescale: Add missing cooling device properties for CPUs 2018-07-03 15:01:09 +08:00
fsl-ls2088a-qds.dts arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls2088a-rdb.dts arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls2088a.dtsi arm64: dts: layerscape: removed compatible string "snps,dw-pcie" 2018-12-08 10:28:38 +08:00
fsl-lx2160a-cex7.dtsi arm64: dts: lx2160a-cex7: add on-module eeproms 2020-03-11 15:58:13 +08:00
fsl-lx2160a-clearfog-cx.dts arm64: dts: lx2160a: add dts for CEX7 platforms 2019-12-23 11:36:36 +08:00
fsl-lx2160a-clearfog-itx.dtsi arm64: dts: lx2160a: add dts for CEX7 platforms 2019-12-23 11:36:36 +08:00
fsl-lx2160a-honeycomb.dts arm64: dts: lx2160a: add dts for CEX7 platforms 2019-12-23 11:36:36 +08:00
fsl-lx2160a-qds.dts arm64: dts: lx2160aqds: Add FSPI node properties 2020-03-11 16:34:29 +08:00
fsl-lx2160a-rdb.dts arm64: dts: lx2160ardb: Update FSPI node properties 2020-03-11 16:34:11 +08:00
fsl-lx2160a.dtsi arm64: dts: layerscape: add iommu-map property to pci nodes 2020-03-11 16:15:48 +08:00
imx8mm-evk.dts arm64: dts: imx8mm-evk: add phy-reset-gpios for fec1 2020-02-24 09:31:24 +08:00
imx8mm-pinfunc.h arm64: dts: imx8mm: Add missing mux options for UART1 and UART2 signals 2019-12-23 11:41:38 +08:00
imx8mm.dtsi arm64: dts: imx8m: fix aips dts node 2020-03-16 16:16:00 +08:00
imx8mn-ddr4-evk.dts arm64: dts: imx8m: Add ddr controller nodes 2019-12-09 09:22:26 +08:00
imx8mn-evk.dts arm64: dts: imx8mn: Add LPDDR4 EVK board support 2019-10-28 21:48:04 +08:00
imx8mn-evk.dtsi arm64: dts: imx8mn-evk: Enable pca6416 on i2c3 bus 2020-03-11 16:05:39 +08:00
imx8mn-pinfunc.h dt-bindings: imx: Add pinctrl binding doc for i.MX8MN 2019-06-25 10:39:39 +02:00
imx8mn.dtsi arm64: dts: imx8mn: Add snvs clock to powerkey 2020-03-16 16:16:00 +08:00
imx8mp-evk.dts arm64: dts: imx8mp-evk: Enable pca6416 on i2c3 bus 2020-03-11 16:07:17 +08:00
imx8mp-pinfunc.h arm64: dts: freescale: Add i.MX8MP dtsi support 2020-02-17 14:13:32 +08:00
imx8mp.dtsi arm64: dts: imx8mp: Add snvs clock to powerkey 2020-03-16 16:16:00 +08:00
imx8mq-evk.dts arm64: dts: imx8mq-evk: add phy-reset-gpios for fec1 2020-02-24 09:37:19 +08:00
imx8mq-hummingboard-pulse.dts arm64: dts: imx8mq-hummingboard-pulse: add eeprom description 2020-01-09 17:14:46 +08:00
imx8mq-librem5-devkit.dts arm64: dts: librem5-devkit: add lsm9ds1 mount matrix 2020-03-11 15:59:19 +08:00
imx8mq-nitrogen.dts arm64: dts: imx8mq: Move usdhc clocks assignment to board DT 2019-10-28 21:48:03 +08:00
imx8mq-phanbell.dts arm64: dts: imx8mq-phanbell: Fix Ethernet PHY post-reset duration 2020-03-11 17:12:32 +08:00
imx8mq-pico-pi.dts arm64: dts: imx8mq: Move usdhc clocks assignment to board DT 2019-10-28 21:48:03 +08:00
imx8mq-pinfunc.h arm64: add basic DTS for i.MX8MQ 2018-12-16 17:28:01 +08:00
imx8mq-sr-som.dtsi arm64: dts: imx8mq-sr-som: add eeprom description 2020-01-09 17:14:32 +08:00
imx8mq-thor96.dts arm64: dts: freescale: Add devicetree support for Thor96 board 2020-01-09 14:40:55 +08:00
imx8mq-zii-ultra-rmb3.dts arm64: dts: zii-ultra: adjust board names 2019-12-09 15:27:18 +08:00
imx8mq-zii-ultra-zest.dts arm64: dts: zii-ultra: adjust board names 2019-12-09 15:27:18 +08:00
imx8mq-zii-ultra.dtsi ARM: Device-tree updates 2019-12-05 12:09:47 -08:00
imx8mq.dtsi arm64: dts: imx8m: fix aips dts node 2020-03-16 16:16:00 +08:00
imx8qxp-ai_ml.dts arm64: dts: imx8qxp: Move usdhc clocks assignment to board DT 2019-10-28 21:48:03 +08:00
imx8qxp-colibri-eval-v3.dts arm64: dts: freescale: add initial support for colibri imx8x 2019-11-04 09:28:07 +08:00
imx8qxp-colibri-eval-v3.dtsi arm64: dts: freescale: add initial support for colibri imx8x 2019-11-04 09:28:07 +08:00
imx8qxp-colibri.dtsi arm64: dts: freescale: add initial support for colibri imx8x 2019-11-04 09:28:07 +08:00
imx8qxp-mek.dts arm64: dts: imx8qxp-mek: Remove unexisting Ethernet PHY 2020-02-19 10:12:57 +08:00
imx8qxp.dtsi arm64: dts: imx: add i.MX8QXP thermal support 2020-03-11 15:58:13 +08:00
Makefile arm64: dts: ls1028a: sl28: add support for variant 2 2020-03-16 16:16:00 +08:00
qoriq-bman-portals.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-0.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-1.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-2.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-3.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-4.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-5.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-10g-0.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-10g-1.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0.dtsi ARM: Device-tree updates 2018-08-23 14:02:22 -07:00
qoriq-qman-portals.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
s32v234-evb.dts arm64: dts: fsl: Add device tree for S32V234-EVB 2019-10-28 21:48:03 +08:00
s32v234.dtsi arm64: dts: freescale: s32v234: use generic name bus 2020-02-13 11:25:25 +08:00