linux/drivers/phy/rockchip
Enric Balletbo i Serra 31926c217b phy: phy-rockchip-inno-usb2: drop reading the utmi-avalid property
That property is no used in mainline and is not documented. The only
board using that property is the rk33-99-evb-rev1 and -rev2 in the
vendor kernel. The existence of a further -rev3 (which also looks way
better cared for compared rev1+2) indicates that the older ones are
probably some sort of preproduction models, where some wiring (on the soc
or board) may have gone wrong.

It is also not clear why this is a hardware-description or a DT
property, so, as noboby seems to care of this just drop reading that
property.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-02-07 11:10:44 +05:30
..
Kconfig phy: add Rockchip Innosilicon hdmi phy 2018-09-10 14:37:37 +05:30
Makefile phy: add Rockchip Innosilicon hdmi phy 2018-09-10 14:37:37 +05:30
phy-rockchip-dp.c
phy-rockchip-emmc.c phy: Convert to using %pOFn instead of device_node.name 2018-09-25 16:10:07 +05:30
phy-rockchip-inno-hdmi.c phy: add Rockchip Innosilicon hdmi phy 2018-09-10 14:37:37 +05:30
phy-rockchip-inno-usb2.c phy: phy-rockchip-inno-usb2: drop reading the utmi-avalid property 2019-02-07 11:10:44 +05:30
phy-rockchip-pcie.c phy: rockchip-pcie: Reconstruct driver to support per-lane PHYs 2017-08-28 13:34:37 -05:00
phy-rockchip-typec.c phy: Use of_node_name_eq for node name comparisons 2018-12-12 10:01:44 +05:30
phy-rockchip-usb.c phy: rockchip-usb: add usb-uart setup for rk3188 2018-09-25 16:10:13 +05:30