Tero Kristo dccaad8950 OMAP3: PM: Force write last pad config register into save area ... Due to OMAP3 erratas 1.157, 1.185 the save of the last pad register (ETK_D14 and ETK_D15) can fail sometimes when there is simultaneous OCP access to the SCM register area. Fixed by writing the last register to the save area. Also, optimized the delay loop for the HW save to include an udelay(1), which limits the number of unnecessary HW accesses to SCM register area during the save. Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Acked-by: Nishanth Menon <nm@ti.com> Reviewed-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>		2010-01-20 18:16:07 -08:00
..
include/mach	omap3: zoom: rename zoom2 name to generic zoom	2009-11-22 10:24:33 -08:00
board-2430sdp.c	mfd: Rename twl4030* driver files to enable re-use	2009-12-13 20:05:51 +01:00
board-3430sdp.c	mfd: Rename twl4030* driver files to enable re-use	2009-12-13 20:05:51 +01:00
board-3630sdp.c	omap: mux: Add 36xx CBP package support	2009-12-11 16:16:33 -08:00
board-4430sdp.c	Merge branch '7xx-iosplit-plat' with omap-fixes	2009-11-10 18:10:34 -08:00
board-am3517evm.c	omap: mux: Add new style init functions to omap3 board-*.c files	2009-12-11 16:16:32 -08:00
board-apollon.c	omap: use smc91x_platdata to setup smc91x	2009-12-11 16:16:33 -08:00
board-cm-t35.c	mfd: twl: fix twl4030 rename for remaining driver, board files	2009-12-16 12:44:04 -08:00
board-generic.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
board-h4.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
board-igep0020.c	mfd: twl: fix twl4030 rename for remaining driver, board files	2009-12-16 12:44:04 -08:00
board-ldp.c	mfd: Rename twl4030* driver files to enable re-use	2009-12-13 20:05:51 +01:00
board-n8x0.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
board-omap3beagle.c	mfd: Rename twl4030* driver files to enable re-use	2009-12-13 20:05:51 +01:00
board-omap3evm.c	mfd: twl: fix twl4030 rename for remaining driver, board files	2009-12-16 12:44:04 -08:00
board-omap3pandora.c	mfd: Rename twl4030* driver files to enable re-use	2009-12-13 20:05:51 +01:00
board-omap3touchbook.c	mfd: twl: fix twl4030 rename for remaining driver, board files	2009-12-16 12:44:04 -08:00
board-overo.c	mfd: Rename twl4030* driver files to enable re-use	2009-12-13 20:05:51 +01:00
board-rx51-peripherals.c	mfd: twl: fix twl4030 rename for remaining driver, board files	2009-12-16 12:44:04 -08:00
board-rx51-sdram.c	omap3: rx51: Add SDRAM init	2009-11-22 10:24:33 -08:00
board-rx51.c	omap: mux: Remove old mux code for 34xx	2009-12-11 16:16:33 -08:00
board-zoom2.c	omap: mux: Add new style init functions to omap3 board-*.c files	2009-12-11 16:16:32 -08:00
board-zoom3.c	omap: mux: Add 36xx CBP package support	2009-12-11 16:16:33 -08:00
board-zoom-debugboard.c	omap3: zoom: rename zoom2 name to generic zoom	2009-11-22 10:24:33 -08:00
board-zoom-peripherals.c	omap2/3: ZOOM: Correcting key mapping for few keys	2010-01-08 10:29:07 -08:00
clock2xxx_data.c	OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx*	2009-12-11 16:16:00 -07:00
clock2xxx.c	OMAP2 clock: dynamically allocate CPUFreq frequency table	2010-01-08 15:23:17 -07:00
clock2xxx.h	OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx*	2009-12-11 16:16:00 -07:00
clock34xx_data.c	OMAP3 clock: Add capability to change rate of dpll4_m5_ck	2010-01-08 15:23:08 -07:00
clock34xx.c	OMAP2: remove duplicated #include	2010-01-08 15:23:03 -07:00
clock34xx.h	ARM: OMAP4: PM: Move DPLL control apis to dpll.c	2009-12-11 17:00:46 -07:00
clock44xx_data.c	ARM: OMAP4: PM: Add init api for DPLL nodes	2009-12-11 17:00:47 -07:00
clock44xx.c	ARM: OMAP4: PM: Add support for OMAP4 dpll api's	2009-12-11 17:00:46 -07:00
clock44xx.h	ARM: OMAP4: PM: Move DPLL control apis to dpll.c	2009-12-11 17:00:46 -07:00
clock_common_data.c	OMAP3 clock: convert clock34xx.h to clock34xx_data.c	2009-12-11 16:12:15 -07:00
clock.c	ARM: OMAP4: PM: Add init api for DPLL nodes	2009-12-11 17:00:47 -07:00
clock.h	ARM: OMAP4: PM: Add init api for DPLL nodes	2009-12-11 17:00:47 -07:00
clockdomain.c	ARM: OMAP3: PM: Fix the Invalid CM_CLKSTCTRL reg access.	2010-01-08 15:23:04 -07:00
clockdomains.h	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
cm4xxx.c	omap: Fix 44xx compile	2009-09-24 16:23:07 -07:00
cm44xx.h	ARM: OMAP4: PM: Adds CM1/2 register defs for OMAP4	2009-12-11 17:00:45 -07:00
cm-regbits-24xx.h	[ARM] OMAP2 PRCM: clean up CM_IDLEST bits	2009-02-08 17:50:37 +00:00
cm-regbits-34xx.h	OMAP3: PM: Add D2D clocks and auto-idle setup to PRCM init	2009-05-28 10:59:07 -07:00
cm-regbits-44xx.h	ARM: OMAP4: PM: Adds CM1/2 register field masks	2009-12-11 17:00:45 -07:00
cm.c	OMAP clock/hwmod: fix off-by-one errors	2009-12-11 17:00:43 -07:00
cm.h	ARM: OMAP4: PM: Add dummy hooks for OMAP4 dpll api's	2009-12-11 17:00:46 -07:00
control.c	OMAP3: PM: Program SDRC to send self refresh on timeout of AUTO_CNT	2009-11-11 14:42:28 -08:00
cpuidle34xx.c	OMAP3: CPUidle: Fixed timer resolution	2010-01-20 18:16:02 -08:00
devices.c	omap: mux: Replace omap_cfg_reg() with new style signal or gpio functions	2009-12-11 16:16:32 -08:00
dpll.c	ARM: OMAP4: PM: Add support for OMAP4 dpll api's	2009-12-11 17:00:46 -07:00
emu.c	ARM: 5843/1: OMAP3: add AMBA devices for ETM and ETB	2009-12-02 10:25:23 +00:00
gpmc-onenand.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
gpmc-smc91x.c	omap: use smc91x_platdata to setup smc91x	2009-12-11 16:16:33 -08:00
gpmc.c	ARM: OMAP4: PM: Add dummy hooks for OMAP4 dpll api's	2009-12-11 17:00:46 -07:00
i2c.c	omap: Split i2c platform init for mach-omap1 and mach-omap2	2009-12-11 16:16:32 -08:00
id.c	omap3: id code detection 3525 vs 3515	2009-12-11 16:16:37 -08:00
io.c	OMAP2xxx IO mapping: mark DSP mappings as being 2420-only	2010-01-08 15:23:05 -07:00
iommu2.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
irq.c	OMAP3: PM: Disable interrupt controller AUTOIDLE before WFI	2010-01-20 18:16:00 -08:00
Kconfig	omap3: EVM: Choose OMAP_PACKAGE_CBB	2010-01-08 10:29:08 -08:00
mailbox.c	omap: mailbox: Adds code changes to support OMAP4 mailbox	2009-11-22 10:24:33 -08:00
Makefile	omap3: Board file of Always Innovating OMAP3-based Touch Book	2009-12-11 16:16:34 -08:00
Makefile.boot	[ARM] 3145/1: OMAP 3a/5: Add support for omap24xx	2005-11-10 14:26:51 +00:00
mcbsp.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
mmc-twl4030.c	omap3630: Set omap3630 MMC1 I/O speed to 52Mhz	2009-11-22 10:24:32 -08:00
mmc-twl4030.h	omap_hsmmc: support for deeper power saving states	2009-09-23 07:39:35 -07:00
mux34xx.c	omap: mux: Add 36xx CBP package support	2009-12-11 16:16:33 -08:00
mux34xx.h	omap: mux: Add 36xx CBP package support	2009-12-11 16:16:33 -08:00
mux.c	omap3: Fix booting if package is uninitialized	2010-01-08 10:29:08 -08:00
mux.h	omap: mux: Add 36xx CBP package support	2009-12-11 16:16:33 -08:00
omap3-iommu.c	omap: iommu: reorganize	2009-11-22 10:24:32 -08:00
omap_hwmod_34xx.h	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
omap_hwmod_2420.h	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
omap_hwmod_2430.h	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
omap_hwmod.c	OMAP: hwmod: warn on missing clockdomain	2009-12-11 17:00:44 -07:00
omap-headsmp.S	OMAP4: AuxCoreBoot registers only accessible in secure mode	2009-12-11 16:16:35 -08:00
omap-smp.c	OMAP4: Remove the secondary wait loop	2009-12-11 16:16:35 -08:00
opp2xxx.h	OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx*	2009-12-11 16:16:00 -07:00
opp2420_data.c	OMAP2xxx OPP: clean up comments in OPP data	2010-01-08 15:23:15 -07:00
opp2430_data.c	OMAP2xxx OPP: clean up comments in OPP data	2010-01-08 15:23:15 -07:00
pm24xx.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
pm34xx.c	OMAP3: PM: Force write last pad config register into save area	2010-01-20 18:16:07 -08:00
pm-debug.c	OMAP: omap3_pm_get_suspend_state() error ignored in pwrdm_suspend_get()	2010-01-20 18:16:07 -08:00
pm.h	OMAP3: PM debug: fix build error when !CONFIG_DEBUG_FS	2010-01-20 18:16:05 -08:00
powerdomain.c	OMAP3: PM: Fix for MPU power domain MEM BANK position	2009-12-11 17:00:42 -07:00
powerdomains24xx.h	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
powerdomains34xx.h	OMAP3: PM: Fix for MPU power domain MEM BANK position	2009-12-11 17:00:42 -07:00
powerdomains.h	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
prcm-common.h	ARM: OMAP4: PM: Adds PRM register shift and mask bits	2009-12-11 17:00:45 -07:00
prcm.c	OMAP3: PM: Removing redundant and potentially dangerous PRCM configration	2010-01-20 18:16:04 -08:00
prm44xx.h	ARM: OMAP4: PM: Adds PRM register defs for OMAP4	2009-12-11 17:00:45 -07:00
prm-regbits-24xx.h	ARM: OMAP2: Powerdomain: Add OMAP2 powerdomains	2008-08-19 11:08:42 +03:00
prm-regbits-34xx.h	OMAP3: PM: Enable IO-CHAIN wakeup	2009-11-11 14:42:28 -08:00
prm-regbits-44xx.h	ARM: OMAP4: PM: Adds PRM register shift and mask bits	2009-12-11 17:00:45 -07:00
prm.h	ARM: OMAP4: PM: Adds PRM register defs for OMAP4	2009-12-11 17:00:45 -07:00
sdram-hynix-h8mbx00u0mer-0em.h	omap3: zoom: Introduce zoom3 board support	2009-11-22 10:24:33 -08:00
sdram-micron-mt46h32m32lf-6.h	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
sdram-qimonda-hyb18m512160af-6.h	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
sdrc2xxx.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
sdrc.c	OMAP2: Add funcs for writing SMS_ROT_* registers	2009-12-09 11:44:32 +02:00
sdrc.h	OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx*	2009-12-11 16:16:00 -07:00
serial.c	omap2/3: make serial_in_override() address the right uart port	2010-01-08 10:29:06 -08:00
sleep24xx.S	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
sleep34xx.S	OMAP3: Fixed ARM aux ctrl register save/restore	2010-01-20 18:16:03 -08:00
sram34xx.S	OMAP3: SDRC: Place SDRC AC timing and MR changes in CORE DVFS SRAM code behind Kconfig	2009-12-11 17:00:42 -07:00
sram242x.S	omap: Split OMAP2_IO_ADDRESS to L3 and L4	2009-10-19 15:25:31 -07:00
sram243x.S	omap: Split OMAP2_IO_ADDRESS to L3 and L4	2009-10-19 15:25:31 -07:00
timer-gp.c	PM debug: allow configurable wakeup from suspend on OMAP GPtimer	2009-11-11 14:42:28 -08:00
timer-mpu.c	ARM: OMAP4: SMP: Add mpu timer support for OMAP4430	2009-06-09 13:03:59 +05:30
usb-ehci.c	omap: mux: Replace omap_cfg_reg() with new style signal or gpio functions	2009-12-11 16:16:32 -08:00
usb-musb.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
usb-tusb6010.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00