mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-13 22:14:20 +08:00
044abbde7b
The clk-phase property is used to represent the 2 clock phase values that is needed for the SD/MMC driver. Add a prepare function to the clk_ops, that will use the syscon driver to set sdmmc_clk's phase shift that is located in the system manager. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> --- v9: none v8: Use degrees in the clk-phase binding property v7: Add dts property to represent the clk phase of the sdmmc_clk. Add a prepare function to the gate clk that will toggle clock phase setting. Remove the "altr,socfpga-sdmmc-sdr-clk" clock type. v6: Add a new clock type "altr,socfpga-sdmmc-sdr-clk" that will be used to set the phase shift settings. v5: Use the "snps,dw-mshc" binding v4: Use the sdmmc_clk prepare function to set the phase shift settings v3: Not use the syscon driver because as of 3.13-rc1, the syscon driver is loaded after the clock driver. v2: Use the syscon driver
264 lines
6.7 KiB
C
264 lines
6.7 KiB
C
/*
|
|
* Copyright 2011-2012 Calxeda, Inc.
|
|
* Copyright (C) 2012-2013 Altera Corporation <www.altera.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Based from clk-highbank.c
|
|
*
|
|
*/
|
|
#include <linux/clk.h>
|
|
#include <linux/clkdev.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/io.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/of.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#include "clk.h"
|
|
|
|
#define SOCFPGA_L4_MP_CLK "l4_mp_clk"
|
|
#define SOCFPGA_L4_SP_CLK "l4_sp_clk"
|
|
#define SOCFPGA_NAND_CLK "nand_clk"
|
|
#define SOCFPGA_NAND_X_CLK "nand_x_clk"
|
|
#define SOCFPGA_MMC_CLK "sdmmc_clk"
|
|
#define SOCFPGA_GPIO_DB_CLK_OFFSET 0xA8
|
|
|
|
#define div_mask(width) ((1 << (width)) - 1)
|
|
#define streq(a, b) (strcmp((a), (b)) == 0)
|
|
|
|
#define to_socfpga_gate_clk(p) container_of(p, struct socfpga_gate_clk, hw.hw)
|
|
|
|
/* SDMMC Group for System Manager defines */
|
|
#define SYSMGR_SDMMCGRP_CTRL_OFFSET 0x108
|
|
#define SYSMGR_SDMMC_CTRL_SET(smplsel, drvsel) \
|
|
((((smplsel) & 0x7) << 3) | (((drvsel) & 0x7) << 0))
|
|
|
|
static u8 socfpga_clk_get_parent(struct clk_hw *hwclk)
|
|
{
|
|
u32 l4_src;
|
|
u32 perpll_src;
|
|
|
|
if (streq(hwclk->init->name, SOCFPGA_L4_MP_CLK)) {
|
|
l4_src = readl(clk_mgr_base_addr + CLKMGR_L4SRC);
|
|
return l4_src &= 0x1;
|
|
}
|
|
if (streq(hwclk->init->name, SOCFPGA_L4_SP_CLK)) {
|
|
l4_src = readl(clk_mgr_base_addr + CLKMGR_L4SRC);
|
|
return !!(l4_src & 2);
|
|
}
|
|
|
|
perpll_src = readl(clk_mgr_base_addr + CLKMGR_PERPLL_SRC);
|
|
if (streq(hwclk->init->name, SOCFPGA_MMC_CLK))
|
|
return perpll_src &= 0x3;
|
|
if (streq(hwclk->init->name, SOCFPGA_NAND_CLK) ||
|
|
streq(hwclk->init->name, SOCFPGA_NAND_X_CLK))
|
|
return (perpll_src >> 2) & 3;
|
|
|
|
/* QSPI clock */
|
|
return (perpll_src >> 4) & 3;
|
|
|
|
}
|
|
|
|
static int socfpga_clk_set_parent(struct clk_hw *hwclk, u8 parent)
|
|
{
|
|
u32 src_reg;
|
|
|
|
if (streq(hwclk->init->name, SOCFPGA_L4_MP_CLK)) {
|
|
src_reg = readl(clk_mgr_base_addr + CLKMGR_L4SRC);
|
|
src_reg &= ~0x1;
|
|
src_reg |= parent;
|
|
writel(src_reg, clk_mgr_base_addr + CLKMGR_L4SRC);
|
|
} else if (streq(hwclk->init->name, SOCFPGA_L4_SP_CLK)) {
|
|
src_reg = readl(clk_mgr_base_addr + CLKMGR_L4SRC);
|
|
src_reg &= ~0x2;
|
|
src_reg |= (parent << 1);
|
|
writel(src_reg, clk_mgr_base_addr + CLKMGR_L4SRC);
|
|
} else {
|
|
src_reg = readl(clk_mgr_base_addr + CLKMGR_PERPLL_SRC);
|
|
if (streq(hwclk->init->name, SOCFPGA_MMC_CLK)) {
|
|
src_reg &= ~0x3;
|
|
src_reg |= parent;
|
|
} else if (streq(hwclk->init->name, SOCFPGA_NAND_CLK) ||
|
|
streq(hwclk->init->name, SOCFPGA_NAND_X_CLK)) {
|
|
src_reg &= ~0xC;
|
|
src_reg |= (parent << 2);
|
|
} else {/* QSPI clock */
|
|
src_reg &= ~0x30;
|
|
src_reg |= (parent << 4);
|
|
}
|
|
writel(src_reg, clk_mgr_base_addr + CLKMGR_PERPLL_SRC);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned long socfpga_clk_recalc_rate(struct clk_hw *hwclk,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct socfpga_gate_clk *socfpgaclk = to_socfpga_gate_clk(hwclk);
|
|
u32 div = 1, val;
|
|
|
|
if (socfpgaclk->fixed_div)
|
|
div = socfpgaclk->fixed_div;
|
|
else if (socfpgaclk->div_reg) {
|
|
val = readl(socfpgaclk->div_reg) >> socfpgaclk->shift;
|
|
val &= div_mask(socfpgaclk->width);
|
|
/* Check for GPIO_DB_CLK by its offset */
|
|
if ((int) socfpgaclk->div_reg & SOCFPGA_GPIO_DB_CLK_OFFSET)
|
|
div = val + 1;
|
|
else
|
|
div = (1 << val);
|
|
}
|
|
|
|
return parent_rate / div;
|
|
}
|
|
|
|
static int socfpga_clk_prepare(struct clk_hw *hwclk)
|
|
{
|
|
struct socfpga_gate_clk *socfpgaclk = to_socfpga_gate_clk(hwclk);
|
|
struct regmap *sys_mgr_base_addr;
|
|
int i;
|
|
u32 hs_timing;
|
|
u32 clk_phase[2];
|
|
|
|
if (socfpgaclk->clk_phase[0] || socfpgaclk->clk_phase[1]) {
|
|
sys_mgr_base_addr = syscon_regmap_lookup_by_compatible("altr,sys-mgr");
|
|
if (IS_ERR(sys_mgr_base_addr)) {
|
|
pr_err("%s: failed to find altr,sys-mgr regmap!\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
switch (socfpgaclk->clk_phase[i]) {
|
|
case 0:
|
|
clk_phase[i] = 0;
|
|
break;
|
|
case 45:
|
|
clk_phase[i] = 1;
|
|
break;
|
|
case 90:
|
|
clk_phase[i] = 2;
|
|
break;
|
|
case 135:
|
|
clk_phase[i] = 3;
|
|
break;
|
|
case 180:
|
|
clk_phase[i] = 4;
|
|
break;
|
|
case 225:
|
|
clk_phase[i] = 5;
|
|
break;
|
|
case 270:
|
|
clk_phase[i] = 6;
|
|
break;
|
|
case 315:
|
|
clk_phase[i] = 7;
|
|
break;
|
|
default:
|
|
clk_phase[i] = 0;
|
|
break;
|
|
}
|
|
}
|
|
hs_timing = SYSMGR_SDMMC_CTRL_SET(clk_phase[0], clk_phase[1]);
|
|
regmap_write(sys_mgr_base_addr, SYSMGR_SDMMCGRP_CTRL_OFFSET,
|
|
hs_timing);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct clk_ops gateclk_ops = {
|
|
.prepare = socfpga_clk_prepare,
|
|
.recalc_rate = socfpga_clk_recalc_rate,
|
|
.get_parent = socfpga_clk_get_parent,
|
|
.set_parent = socfpga_clk_set_parent,
|
|
};
|
|
|
|
static void __init __socfpga_gate_init(struct device_node *node,
|
|
const struct clk_ops *ops)
|
|
{
|
|
u32 clk_gate[2];
|
|
u32 div_reg[3];
|
|
u32 clk_phase[2];
|
|
u32 fixed_div;
|
|
struct clk *clk;
|
|
struct socfpga_gate_clk *socfpga_clk;
|
|
const char *clk_name = node->name;
|
|
const char *parent_name[SOCFPGA_MAX_PARENTS];
|
|
struct clk_init_data init;
|
|
int rc;
|
|
int i = 0;
|
|
|
|
socfpga_clk = kzalloc(sizeof(*socfpga_clk), GFP_KERNEL);
|
|
if (WARN_ON(!socfpga_clk))
|
|
return;
|
|
|
|
rc = of_property_read_u32_array(node, "clk-gate", clk_gate, 2);
|
|
if (rc)
|
|
clk_gate[0] = 0;
|
|
|
|
if (clk_gate[0]) {
|
|
socfpga_clk->hw.reg = clk_mgr_base_addr + clk_gate[0];
|
|
socfpga_clk->hw.bit_idx = clk_gate[1];
|
|
|
|
gateclk_ops.enable = clk_gate_ops.enable;
|
|
gateclk_ops.disable = clk_gate_ops.disable;
|
|
}
|
|
|
|
rc = of_property_read_u32(node, "fixed-divider", &fixed_div);
|
|
if (rc)
|
|
socfpga_clk->fixed_div = 0;
|
|
else
|
|
socfpga_clk->fixed_div = fixed_div;
|
|
|
|
rc = of_property_read_u32_array(node, "div-reg", div_reg, 3);
|
|
if (!rc) {
|
|
socfpga_clk->div_reg = clk_mgr_base_addr + div_reg[0];
|
|
socfpga_clk->shift = div_reg[1];
|
|
socfpga_clk->width = div_reg[2];
|
|
} else {
|
|
socfpga_clk->div_reg = 0;
|
|
}
|
|
|
|
rc = of_property_read_u32_array(node, "clk-phase", clk_phase, 2);
|
|
if (!rc) {
|
|
socfpga_clk->clk_phase[0] = clk_phase[0];
|
|
socfpga_clk->clk_phase[1] = clk_phase[1];
|
|
}
|
|
|
|
of_property_read_string(node, "clock-output-names", &clk_name);
|
|
|
|
init.name = clk_name;
|
|
init.ops = ops;
|
|
init.flags = 0;
|
|
while (i < SOCFPGA_MAX_PARENTS && (parent_name[i] =
|
|
of_clk_get_parent_name(node, i)) != NULL)
|
|
i++;
|
|
|
|
init.parent_names = parent_name;
|
|
init.num_parents = i;
|
|
socfpga_clk->hw.hw.init = &init;
|
|
|
|
clk = clk_register(NULL, &socfpga_clk->hw.hw);
|
|
if (WARN_ON(IS_ERR(clk))) {
|
|
kfree(socfpga_clk);
|
|
return;
|
|
}
|
|
rc = of_clk_add_provider(node, of_clk_src_simple_get, clk);
|
|
if (WARN_ON(rc))
|
|
return;
|
|
}
|
|
|
|
void __init socfpga_gate_init(struct device_node *node)
|
|
{
|
|
__socfpga_gate_init(node, &gateclk_ops);
|
|
}
|