Andrew Lunn c047a1f918 dsa: mv88e6xxx: Enable forwarding for unknown to the CPU port ... Frames destined to an unknown address must be forwarded to the CPU port. Otherwise incoming ARP, dhcp leases, etc, do not work. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>		2015-09-29 21:06:51 -07:00
..
bcm_sf2_regs.h	net: dsa: bcm_sf2: add HW bridging support	2015-02-25 17:03:38 -05:00
bcm_sf2.c	net: dsa: bcm_sf2: Fix ageing conditions and operation	2015-09-08 22:27:35 -07:00
bcm_sf2.h	net: dsa: bcm_sf2: Fix 64-bits register writes	2015-09-09 14:14:22 -07:00
Kconfig	dsa: mv88e6352/mv88e6xxx: Add support for Marvell 88E6320 and 88E6321	2015-07-09 14:34:23 -07:00
Makefile	net: dsa: Add support for Marvell 88E6352	2014-10-30 14:54:10 -04:00
mv88e6xxx.c	dsa: mv88e6xxx: Enable forwarding for unknown to the CPU port	2015-09-29 21:06:51 -07:00
mv88e6xxx.h	dsa: mv88e6xxx: Set the RGMII delay based on phy interface	2015-08-31 14:48:02 -07:00
mv88e6060.c	net: dsa: Report known silicon revisions for Marvell 88E6060	2014-10-30 14:54:10 -04:00
mv88e6123_61_65.c	dsa: mv88e6xxx: Allow speed/duplex of port to be configured	2015-08-31 14:48:01 -07:00
mv88e6131.c	dsa: mv88e6xxx: Allow speed/duplex of port to be configured	2015-08-31 14:48:01 -07:00
mv88e6171.c	net: dsa: mv88e6171: add hardware 802.1Q support	2015-09-06 19:50:50 -07:00
mv88e6352.c	dsa: mv88e6xxx: Allow speed/duplex of port to be configured	2015-08-31 14:48:01 -07:00