korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-14 15:54:15 +08:00
Code Issues Packages Projects Releases Wiki Activity
db5bcf87bb
linux/drivers/mfd/axp20x.c
Chen-Yu Tsai 696f0b3f4a mfd: axp20x: Fix AXP806 access errors on cold boot 
The AXP806 supports either master/standalone or slave mode.
Slave mode allows sharing the serial bus, even with multiple
AXP806 which all have the same hardware address.

This is done with extra "serial interface address extension",
or AXP806_BUS_ADDR_EXT, and "register address extension", or
AXP806_REG_ADDR_EXT, registers. The former is read-only, with
1 bit customizable at the factory, and 1 bit depending on the
state of an external pin. The latter is writable. Only when
the these device addressing bits (in the upper 4 bits of the
registers) match, will the device respond to operations on
its other registers.

The AXP806_REG_ADDR_EXT was previously configured by Allwinner's
bootloader. Work on U-boot SPL support now allows us to switch
to mainline U-boot, which doesn't do this for us. There might
be other bare minimum bootloaders out there which don't to this
either. It's best to handle this in the kernel.

This patch sets AXP806_REG_ADDR_EXT to 0x10, which is what we
know to be the proper value for a standard AXP806 in slave mode.
Afterwards it will reinitialize the regmap cache, to purge any
invalid stale values.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-02-13 09:29:42 +00:00

935 lines
29 KiB
C
Raw Blame History

/*
* MFD core driver for the X-Powers' Power Management ICs
*
* AXP20x typically comprises an adaptive USB-Compatible PWM charger, BUCK DC-DC
* converters, LDOs, multiple 12-bit ADCs of voltage, current and temperature
* as well as configurable GPIOs.
*
* This file contains the interface independent core functions.
*
* Copyright (C) 2014 Carlo Caione
*
* Author: Carlo Caione <carlo@caione.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/mfd/axp20x.h>
#include <linux/mfd/core.h>
#include <linux/of_device.h>
#include <linux/acpi.h>
#define AXP20X_OFF 0x80
#define AXP806_REG_ADDR_EXT_ADDR_SLAVE_MODE BIT(4)
static const char * const axp20x_model_names[] = {
"AXP152",
"AXP202",
"AXP209",
"AXP221",
"AXP223",
"AXP288",
"AXP806",
"AXP809",
};
static const struct regmap_range axp152_writeable_ranges[] = {
regmap_reg_range(AXP152_LDO3456_DC1234_CTRL, AXP152_IRQ3_STATE),
regmap_reg_range(AXP152_DCDC_MODE, AXP152_PWM1_DUTY_CYCLE),
};
static const struct regmap_range axp152_volatile_ranges[] = {
regmap_reg_range(AXP152_PWR_OP_MODE, AXP152_PWR_OP_MODE),
regmap_reg_range(AXP152_IRQ1_EN, AXP152_IRQ3_STATE),
regmap_reg_range(AXP152_GPIO_INPUT, AXP152_GPIO_INPUT),
};
static const struct regmap_access_table axp152_writeable_table = {
.yes_ranges = axp152_writeable_ranges,
.n_yes_ranges = ARRAY_SIZE(axp152_writeable_ranges),
};
static const struct regmap_access_table axp152_volatile_table = {
.yes_ranges = axp152_volatile_ranges,
.n_yes_ranges = ARRAY_SIZE(axp152_volatile_ranges),
};
static const struct regmap_range axp20x_writeable_ranges[] = {
regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES),
regmap_reg_range(AXP20X_RDC_H, AXP20X_OCV(AXP20X_OCV_MAX)),
};
static const struct regmap_range axp20x_volatile_ranges[] = {
regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP20X_USB_OTG_STATUS),
regmap_reg_range(AXP20X_CHRG_CTRL1, AXP20X_CHRG_CTRL2),
regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE),
regmap_reg_range(AXP20X_ACIN_V_ADC_H, AXP20X_IPSOUT_V_HIGH_L),
regmap_reg_range(AXP20X_GPIO20_SS, AXP20X_GPIO3_CTRL),
regmap_reg_range(AXP20X_FG_RES, AXP20X_RDC_L),
};
static const struct regmap_access_table axp20x_writeable_table = {
.yes_ranges = axp20x_writeable_ranges,
.n_yes_ranges = ARRAY_SIZE(axp20x_writeable_ranges),
};
static const struct regmap_access_table axp20x_volatile_table = {
.yes_ranges = axp20x_volatile_ranges,
.n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges),
};
/* AXP22x ranges are shared with the AXP809, as they cover the same range */
static const struct regmap_range axp22x_writeable_ranges[] = {
regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
regmap_reg_range(AXP20X_DCDC_MODE, AXP22X_BATLOW_THRES1),
};
static const struct regmap_range axp22x_volatile_ranges[] = {
regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP20X_PWR_OP_MODE),
regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE),
regmap_reg_range(AXP22X_GPIO_STATE, AXP22X_GPIO_STATE),
regmap_reg_range(AXP22X_PMIC_ADC_H, AXP20X_IPSOUT_V_HIGH_L),
regmap_reg_range(AXP20X_FG_RES, AXP20X_FG_RES),
};
static const struct regmap_access_table axp22x_writeable_table = {
.yes_ranges = axp22x_writeable_ranges,
.n_yes_ranges = ARRAY_SIZE(axp22x_writeable_ranges),
};
static const struct regmap_access_table axp22x_volatile_table = {
.yes_ranges = axp22x_volatile_ranges,
.n_yes_ranges = ARRAY_SIZE(axp22x_volatile_ranges),
};
static const struct regmap_range axp288_writeable_ranges[] = {
regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ6_STATE),
regmap_reg_range(AXP20X_DCDC_MODE, AXP288_FG_TUNE5),
};
static const struct regmap_range axp288_volatile_ranges[] = {
regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP288_POWER_REASON),
regmap_reg_range(AXP288_BC_GLOBAL, AXP288_BC_GLOBAL),
regmap_reg_range(AXP288_BC_DET_STAT, AXP288_BC_DET_STAT),
regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IPSOUT_V_HIGH_L),
regmap_reg_range(AXP20X_TIMER_CTRL, AXP20X_TIMER_CTRL),
regmap_reg_range(AXP22X_GPIO_STATE, AXP22X_GPIO_STATE),
regmap_reg_range(AXP288_RT_BATT_V_H, AXP288_RT_BATT_V_L),
regmap_reg_range(AXP20X_FG_RES, AXP288_FG_CC_CAP_REG),
};
static const struct regmap_access_table axp288_writeable_table = {
.yes_ranges = axp288_writeable_ranges,
.n_yes_ranges = ARRAY_SIZE(axp288_writeable_ranges),
};
static const struct regmap_access_table axp288_volatile_table = {
.yes_ranges = axp288_volatile_ranges,
.n_yes_ranges = ARRAY_SIZE(axp288_volatile_ranges),
};
static const struct regmap_range axp806_writeable_ranges[] = {
regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_DATACACHE(3)),
regmap_reg_range(AXP806_PWR_OUT_CTRL1, AXP806_CLDO3_V_CTRL),
regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ2_EN),
regmap_reg_range(AXP20X_IRQ1_STATE, AXP20X_IRQ2_STATE),
regmap_reg_range(AXP806_REG_ADDR_EXT, AXP806_REG_ADDR_EXT),
};
static const struct regmap_range axp806_volatile_ranges[] = {
regmap_reg_range(AXP20X_IRQ1_STATE, AXP20X_IRQ2_STATE),
};
static const struct regmap_access_table axp806_writeable_table = {
.yes_ranges = axp806_writeable_ranges,
.n_yes_ranges = ARRAY_SIZE(axp806_writeable_ranges),
};
static const struct regmap_access_table axp806_volatile_table = {
.yes_ranges = axp806_volatile_ranges,
.n_yes_ranges = ARRAY_SIZE(axp806_volatile_ranges),
};
static struct resource axp152_pek_resources[] = {
DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_RIS_EDGE, "PEK_DBR"),
DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
};
static struct resource axp20x_ac_power_supply_resources[] = {
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_PLUGIN, "ACIN_PLUGIN"),
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_REMOVAL, "ACIN_REMOVAL"),
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_OVER_V, "ACIN_OVER_V"),
};
static struct resource axp20x_pek_resources[] = {
{
.name = "PEK_DBR",
.start = AXP20X_IRQ_PEK_RIS_EDGE,
.end = AXP20X_IRQ_PEK_RIS_EDGE,
.flags = IORESOURCE_IRQ,
}, {
.name = "PEK_DBF",
.start = AXP20X_IRQ_PEK_FAL_EDGE,
.end = AXP20X_IRQ_PEK_FAL_EDGE,
.flags = IORESOURCE_IRQ,
},
};
static struct resource axp20x_usb_power_supply_resources[] = {
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_PLUGIN, "VBUS_PLUGIN"),
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"),
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_VALID, "VBUS_VALID"),
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_NOT_VALID, "VBUS_NOT_VALID"),
};
static struct resource axp22x_usb_power_supply_resources[] = {
DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_VBUS_PLUGIN, "VBUS_PLUGIN"),
DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"),
};
static struct resource axp22x_pek_resources[] = {
{
.name = "PEK_DBR",
.start = AXP22X_IRQ_PEK_RIS_EDGE,
.end = AXP22X_IRQ_PEK_RIS_EDGE,
.flags = IORESOURCE_IRQ,
}, {
.name = "PEK_DBF",
.start = AXP22X_IRQ_PEK_FAL_EDGE,
.end = AXP22X_IRQ_PEK_FAL_EDGE,
.flags = IORESOURCE_IRQ,
},
};
static struct resource axp288_power_button_resources[] = {
{
.name = "PEK_DBR",
.start = AXP288_IRQ_POKP,
.end = AXP288_IRQ_POKP,
.flags = IORESOURCE_IRQ,
},
{
.name = "PEK_DBF",
.start = AXP288_IRQ_POKN,
.end = AXP288_IRQ_POKN,
.flags = IORESOURCE_IRQ,
},
};
static struct resource axp288_fuel_gauge_resources[] = {
{
.start = AXP288_IRQ_QWBTU,
.end = AXP288_IRQ_QWBTU,
.flags = IORESOURCE_IRQ,
},
{
.start = AXP288_IRQ_WBTU,
.end = AXP288_IRQ_WBTU,
.flags = IORESOURCE_IRQ,
},
{
.start = AXP288_IRQ_QWBTO,
.end = AXP288_IRQ_QWBTO,
.flags = IORESOURCE_IRQ,
},
{
.start = AXP288_IRQ_WBTO,
.end = AXP288_IRQ_WBTO,
.flags = IORESOURCE_IRQ,
},
{
.start = AXP288_IRQ_WL2,
.end = AXP288_IRQ_WL2,
.flags = IORESOURCE_IRQ,
},
{
.start = AXP288_IRQ_WL1,
.end = AXP288_IRQ_WL1,
.flags = IORESOURCE_IRQ,
},
};
static struct resource axp809_pek_resources[] = {
{
.name = "PEK_DBR",
.start = AXP809_IRQ_PEK_RIS_EDGE,
.end = AXP809_IRQ_PEK_RIS_EDGE,
.flags = IORESOURCE_IRQ,
}, {
.name = "PEK_DBF",
.start = AXP809_IRQ_PEK_FAL_EDGE,
.end = AXP809_IRQ_PEK_FAL_EDGE,
.flags = IORESOURCE_IRQ,
},
};
static const struct regmap_config axp152_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.wr_table = &axp152_writeable_table,
.volatile_table = &axp152_volatile_table,
.max_register = AXP152_PWM1_DUTY_CYCLE,
.cache_type = REGCACHE_RBTREE,
};
static const struct regmap_config axp20x_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.wr_table = &axp20x_writeable_table,
.volatile_table = &axp20x_volatile_table,
.max_register = AXP20X_OCV(AXP20X_OCV_MAX),
.cache_type = REGCACHE_RBTREE,
};
static const struct regmap_config axp22x_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.wr_table = &axp22x_writeable_table,
.volatile_table = &axp22x_volatile_table,
.max_register = AXP22X_BATLOW_THRES1,
.cache_type = REGCACHE_RBTREE,
};
static const struct regmap_config axp288_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.wr_table = &axp288_writeable_table,
.volatile_table = &axp288_volatile_table,
.max_register = AXP288_FG_TUNE5,
.cache_type = REGCACHE_RBTREE,
};
static const struct regmap_config axp806_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.wr_table = &axp806_writeable_table,
.volatile_table = &axp806_volatile_table,
.max_register = AXP806_REG_ADDR_EXT,
.cache_type = REGCACHE_RBTREE,
};
#define INIT_REGMAP_IRQ(_variant, _irq, _off, _mask) \
[_variant##_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) }
static const struct regmap_irq axp152_regmap_irqs[] = {
INIT_REGMAP_IRQ(AXP152, LDO0IN_CONNECT, 0, 6),
INIT_REGMAP_IRQ(AXP152, LDO0IN_REMOVAL, 0, 5),
INIT_REGMAP_IRQ(AXP152, ALDO0IN_CONNECT, 0, 3),
INIT_REGMAP_IRQ(AXP152, ALDO0IN_REMOVAL, 0, 2),
INIT_REGMAP_IRQ(AXP152, DCDC1_V_LOW, 1, 5),
INIT_REGMAP_IRQ(AXP152, DCDC2_V_LOW, 1, 4),
INIT_REGMAP_IRQ(AXP152, DCDC3_V_LOW, 1, 3),
INIT_REGMAP_IRQ(AXP152, DCDC4_V_LOW, 1, 2),
INIT_REGMAP_IRQ(AXP152, PEK_SHORT, 1, 1),
INIT_REGMAP_IRQ(AXP152, PEK_LONG, 1, 0),
INIT_REGMAP_IRQ(AXP152, TIMER, 2, 7),
INIT_REGMAP_IRQ(AXP152, PEK_RIS_EDGE, 2, 6),
INIT_REGMAP_IRQ(AXP152, PEK_FAL_EDGE, 2, 5),
INIT_REGMAP_IRQ(AXP152, GPIO3_INPUT, 2, 3),
INIT_REGMAP_IRQ(AXP152, GPIO2_INPUT, 2, 2),
INIT_REGMAP_IRQ(AXP152, GPIO1_INPUT, 2, 1),
INIT_REGMAP_IRQ(AXP152, GPIO0_INPUT, 2, 0),
};
static const struct regmap_irq axp20x_regmap_irqs[] = {
INIT_REGMAP_IRQ(AXP20X, ACIN_OVER_V, 0, 7),
INIT_REGMAP_IRQ(AXP20X, ACIN_PLUGIN, 0, 6),
INIT_REGMAP_IRQ(AXP20X, ACIN_REMOVAL, 0, 5),
INIT_REGMAP_IRQ(AXP20X, VBUS_OVER_V, 0, 4),
INIT_REGMAP_IRQ(AXP20X, VBUS_PLUGIN, 0, 3),
INIT_REGMAP_IRQ(AXP20X, VBUS_REMOVAL, 0, 2),
INIT_REGMAP_IRQ(AXP20X, VBUS_V_LOW, 0, 1),
INIT_REGMAP_IRQ(AXP20X, BATT_PLUGIN, 1, 7),
INIT_REGMAP_IRQ(AXP20X, BATT_REMOVAL, 1, 6),
INIT_REGMAP_IRQ(AXP20X, BATT_ENT_ACT_MODE, 1, 5),
INIT_REGMAP_IRQ(AXP20X, BATT_EXIT_ACT_MODE, 1, 4),
INIT_REGMAP_IRQ(AXP20X, CHARG, 1, 3),
INIT_REGMAP_IRQ(AXP20X, CHARG_DONE, 1, 2),
INIT_REGMAP_IRQ(AXP20X, BATT_TEMP_HIGH, 1, 1),
INIT_REGMAP_IRQ(AXP20X, BATT_TEMP_LOW, 1, 0),
INIT_REGMAP_IRQ(AXP20X, DIE_TEMP_HIGH, 2, 7),
INIT_REGMAP_IRQ(AXP20X, CHARG_I_LOW, 2, 6),
INIT_REGMAP_IRQ(AXP20X, DCDC1_V_LONG, 2, 5),
INIT_REGMAP_IRQ(AXP20X, DCDC2_V_LONG, 2, 4),
INIT_REGMAP_IRQ(AXP20X, DCDC3_V_LONG, 2, 3),
INIT_REGMAP_IRQ(AXP20X, PEK_SHORT, 2, 1),
INIT_REGMAP_IRQ(AXP20X, PEK_LONG, 2, 0),
INIT_REGMAP_IRQ(AXP20X, N_OE_PWR_ON, 3, 7),
INIT_REGMAP_IRQ(AXP20X, N_OE_PWR_OFF, 3, 6),
INIT_REGMAP_IRQ(AXP20X, VBUS_VALID, 3, 5),
INIT_REGMAP_IRQ(AXP20X, VBUS_NOT_VALID, 3, 4),
INIT_REGMAP_IRQ(AXP20X, VBUS_SESS_VALID, 3, 3),
INIT_REGMAP_IRQ(AXP20X, VBUS_SESS_END, 3, 2),
INIT_REGMAP_IRQ(AXP20X, LOW_PWR_LVL1, 3, 1),
INIT_REGMAP_IRQ(AXP20X, LOW_PWR_LVL2, 3, 0),
INIT_REGMAP_IRQ(AXP20X, TIMER, 4, 7),
INIT_REGMAP_IRQ(AXP20X, PEK_RIS_EDGE, 4, 6),
INIT_REGMAP_IRQ(AXP20X, PEK_FAL_EDGE, 4, 5),
INIT_REGMAP_IRQ(AXP20X, GPIO3_INPUT, 4, 3),
INIT_REGMAP_IRQ(AXP20X, GPIO2_INPUT, 4, 2),
INIT_REGMAP_IRQ(AXP20X, GPIO1_INPUT, 4, 1),
INIT_REGMAP_IRQ(AXP20X, GPIO0_INPUT, 4, 0),
};
static const struct regmap_irq axp22x_regmap_irqs[] = {
INIT_REGMAP_IRQ(AXP22X, ACIN_OVER_V, 0, 7),
INIT_REGMAP_IRQ(AXP22X, ACIN_PLUGIN, 0, 6),
INIT_REGMAP_IRQ(AXP22X, ACIN_REMOVAL, 0, 5),
INIT_REGMAP_IRQ(AXP22X, VBUS_OVER_V, 0, 4),
INIT_REGMAP_IRQ(AXP22X, VBUS_PLUGIN, 0, 3),
INIT_REGMAP_IRQ(AXP22X, VBUS_REMOVAL, 0, 2),
INIT_REGMAP_IRQ(AXP22X, VBUS_V_LOW, 0, 1),
INIT_REGMAP_IRQ(AXP22X, BATT_PLUGIN, 1, 7),
INIT_REGMAP_IRQ(AXP22X, BATT_REMOVAL, 1, 6),
INIT_REGMAP_IRQ(AXP22X, BATT_ENT_ACT_MODE, 1, 5),
INIT_REGMAP_IRQ(AXP22X, BATT_EXIT_ACT_MODE, 1, 4),
INIT_REGMAP_IRQ(AXP22X, CHARG, 1, 3),
INIT_REGMAP_IRQ(AXP22X, CHARG_DONE, 1, 2),
INIT_REGMAP_IRQ(AXP22X, BATT_TEMP_HIGH, 1, 1),
INIT_REGMAP_IRQ(AXP22X, BATT_TEMP_LOW, 1, 0),
INIT_REGMAP_IRQ(AXP22X, DIE_TEMP_HIGH, 2, 7),
INIT_REGMAP_IRQ(AXP22X, PEK_SHORT, 2, 1),
INIT_REGMAP_IRQ(AXP22X, PEK_LONG, 2, 0),
INIT_REGMAP_IRQ(AXP22X, LOW_PWR_LVL1, 3, 1),
INIT_REGMAP_IRQ(AXP22X, LOW_PWR_LVL2, 3, 0),
INIT_REGMAP_IRQ(AXP22X, TIMER, 4, 7),
INIT_REGMAP_IRQ(AXP22X, PEK_RIS_EDGE, 4, 6),
INIT_REGMAP_IRQ(AXP22X, PEK_FAL_EDGE, 4, 5),
INIT_REGMAP_IRQ(AXP22X, GPIO1_INPUT, 4, 1),
INIT_REGMAP_IRQ(AXP22X, GPIO0_INPUT, 4, 0),
};
/* some IRQs are compatible with axp20x models */
static const struct regmap_irq axp288_regmap_irqs[] = {
INIT_REGMAP_IRQ(AXP288, VBUS_FALL, 0, 2),
INIT_REGMAP_IRQ(AXP288, VBUS_RISE, 0, 3),
INIT_REGMAP_IRQ(AXP288, OV, 0, 4),
INIT_REGMAP_IRQ(AXP288, FALLING_ALT, 0, 5),
INIT_REGMAP_IRQ(AXP288, RISING_ALT, 0, 6),
INIT_REGMAP_IRQ(AXP288, OV_ALT, 0, 7),
INIT_REGMAP_IRQ(AXP288, DONE, 1, 2),
INIT_REGMAP_IRQ(AXP288, CHARGING, 1, 3),
INIT_REGMAP_IRQ(AXP288, SAFE_QUIT, 1, 4),
INIT_REGMAP_IRQ(AXP288, SAFE_ENTER, 1, 5),
INIT_REGMAP_IRQ(AXP288, ABSENT, 1, 6),
INIT_REGMAP_IRQ(AXP288, APPEND, 1, 7),
INIT_REGMAP_IRQ(AXP288, QWBTU, 2, 0),
INIT_REGMAP_IRQ(AXP288, WBTU, 2, 1),
INIT_REGMAP_IRQ(AXP288, QWBTO, 2, 2),
INIT_REGMAP_IRQ(AXP288, WBTO, 2, 3),
INIT_REGMAP_IRQ(AXP288, QCBTU, 2, 4),
INIT_REGMAP_IRQ(AXP288, CBTU, 2, 5),
INIT_REGMAP_IRQ(AXP288, QCBTO, 2, 6),
INIT_REGMAP_IRQ(AXP288, CBTO, 2, 7),
INIT_REGMAP_IRQ(AXP288, WL2, 3, 0),
INIT_REGMAP_IRQ(AXP288, WL1, 3, 1),
INIT_REGMAP_IRQ(AXP288, GPADC, 3, 2),
INIT_REGMAP_IRQ(AXP288, OT, 3, 7),
INIT_REGMAP_IRQ(AXP288, GPIO0, 4, 0),
INIT_REGMAP_IRQ(AXP288, GPIO1, 4, 1),
INIT_REGMAP_IRQ(AXP288, POKO, 4, 2),
INIT_REGMAP_IRQ(AXP288, POKL, 4, 3),
INIT_REGMAP_IRQ(AXP288, POKS, 4, 4),
INIT_REGMAP_IRQ(AXP288, POKN, 4, 5),
INIT_REGMAP_IRQ(AXP288, POKP, 4, 6),
INIT_REGMAP_IRQ(AXP288, TIMER, 4, 7),
INIT_REGMAP_IRQ(AXP288, MV_CHNG, 5, 0),
INIT_REGMAP_IRQ(AXP288, BC_USB_CHNG, 5, 1),
};
static const struct regmap_irq axp806_regmap_irqs[] = {
INIT_REGMAP_IRQ(AXP806, DIE_TEMP_HIGH_LV1, 0, 0),
INIT_REGMAP_IRQ(AXP806, DIE_TEMP_HIGH_LV2, 0, 1),
INIT_REGMAP_IRQ(AXP806, DCDCA_V_LOW, 0, 3),
INIT_REGMAP_IRQ(AXP806, DCDCB_V_LOW, 0, 4),
INIT_REGMAP_IRQ(AXP806, DCDCC_V_LOW, 0, 5),
INIT_REGMAP_IRQ(AXP806, DCDCD_V_LOW, 0, 6),
INIT_REGMAP_IRQ(AXP806, DCDCE_V_LOW, 0, 7),
INIT_REGMAP_IRQ(AXP806, PWROK_LONG, 1, 0),
INIT_REGMAP_IRQ(AXP806, PWROK_SHORT, 1, 1),
INIT_REGMAP_IRQ(AXP806, WAKEUP, 1, 4),
INIT_REGMAP_IRQ(AXP806, PWROK_FALL, 1, 5),
INIT_REGMAP_IRQ(AXP806, PWROK_RISE, 1, 6),
};
static const struct regmap_irq axp809_regmap_irqs[] = {
INIT_REGMAP_IRQ(AXP809, ACIN_OVER_V, 0, 7),
INIT_REGMAP_IRQ(AXP809, ACIN_PLUGIN, 0, 6),
INIT_REGMAP_IRQ(AXP809, ACIN_REMOVAL, 0, 5),
INIT_REGMAP_IRQ(AXP809, VBUS_OVER_V, 0, 4),
INIT_REGMAP_IRQ(AXP809, VBUS_PLUGIN, 0, 3),
INIT_REGMAP_IRQ(AXP809, VBUS_REMOVAL, 0, 2),
INIT_REGMAP_IRQ(AXP809, VBUS_V_LOW, 0, 1),
INIT_REGMAP_IRQ(AXP809, BATT_PLUGIN, 1, 7),
INIT_REGMAP_IRQ(AXP809, BATT_REMOVAL, 1, 6),
INIT_REGMAP_IRQ(AXP809, BATT_ENT_ACT_MODE, 1, 5),
INIT_REGMAP_IRQ(AXP809, BATT_EXIT_ACT_MODE, 1, 4),
INIT_REGMAP_IRQ(AXP809, CHARG, 1, 3),
INIT_REGMAP_IRQ(AXP809, CHARG_DONE, 1, 2),
INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_HIGH, 2, 7),
INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_HIGH_END, 2, 6),
INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_LOW, 2, 5),
INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_LOW_END, 2, 4),
INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_HIGH, 2, 3),
INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_HIGH_END, 2, 2),
INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_LOW, 2, 1),
INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_LOW_END, 2, 0),
INIT_REGMAP_IRQ(AXP809, DIE_TEMP_HIGH, 3, 7),
INIT_REGMAP_IRQ(AXP809, LOW_PWR_LVL1, 3, 1),
INIT_REGMAP_IRQ(AXP809, LOW_PWR_LVL2, 3, 0),
INIT_REGMAP_IRQ(AXP809, TIMER, 4, 7),
INIT_REGMAP_IRQ(AXP809, PEK_RIS_EDGE, 4, 6),
INIT_REGMAP_IRQ(AXP809, PEK_FAL_EDGE, 4, 5),
INIT_REGMAP_IRQ(AXP809, PEK_SHORT, 4, 4),
INIT_REGMAP_IRQ(AXP809, PEK_LONG, 4, 3),
INIT_REGMAP_IRQ(AXP809, PEK_OVER_OFF, 4, 2),
INIT_REGMAP_IRQ(AXP809, GPIO1_INPUT, 4, 1),
INIT_REGMAP_IRQ(AXP809, GPIO0_INPUT, 4, 0),
};
static const struct regmap_irq_chip axp152_regmap_irq_chip = {
.name = "axp152_irq_chip",
.status_base = AXP152_IRQ1_STATE,
.ack_base = AXP152_IRQ1_STATE,
.mask_base = AXP152_IRQ1_EN,
.mask_invert = true,
.init_ack_masked = true,
.irqs = axp152_regmap_irqs,
.num_irqs = ARRAY_SIZE(axp152_regmap_irqs),
.num_regs = 3,
};
static const struct regmap_irq_chip axp20x_regmap_irq_chip = {
.name = "axp20x_irq_chip",
.status_base = AXP20X_IRQ1_STATE,
.ack_base = AXP20X_IRQ1_STATE,
.mask_base = AXP20X_IRQ1_EN,
.mask_invert = true,
.init_ack_masked = true,
.irqs = axp20x_regmap_irqs,
.num_irqs = ARRAY_SIZE(axp20x_regmap_irqs),
.num_regs = 5,
};
static const struct regmap_irq_chip axp22x_regmap_irq_chip = {
.name = "axp22x_irq_chip",
.status_base = AXP20X_IRQ1_STATE,
.ack_base = AXP20X_IRQ1_STATE,
.mask_base = AXP20X_IRQ1_EN,
.mask_invert = true,
.init_ack_masked = true,
.irqs = axp22x_regmap_irqs,
.num_irqs = ARRAY_SIZE(axp22x_regmap_irqs),
.num_regs = 5,
};
static const struct regmap_irq_chip axp288_regmap_irq_chip = {
.name = "axp288_irq_chip",
.status_base = AXP20X_IRQ1_STATE,
.ack_base = AXP20X_IRQ1_STATE,
.mask_base = AXP20X_IRQ1_EN,
.mask_invert = true,
.init_ack_masked = true,
.irqs = axp288_regmap_irqs,
.num_irqs = ARRAY_SIZE(axp288_regmap_irqs),
.num_regs = 6,
};
static const struct regmap_irq_chip axp806_regmap_irq_chip = {
.name = "axp806",
.status_base = AXP20X_IRQ1_STATE,
.ack_base = AXP20X_IRQ1_STATE,
.mask_base = AXP20X_IRQ1_EN,
.mask_invert = true,
.init_ack_masked = true,
.irqs = axp806_regmap_irqs,
.num_irqs = ARRAY_SIZE(axp806_regmap_irqs),
.num_regs = 2,
};
static const struct regmap_irq_chip axp809_regmap_irq_chip = {
.name = "axp809",
.status_base = AXP20X_IRQ1_STATE,
.ack_base = AXP20X_IRQ1_STATE,
.mask_base = AXP20X_IRQ1_EN,
.mask_invert = true,
.init_ack_masked = true,
.irqs = axp809_regmap_irqs,
.num_irqs = ARRAY_SIZE(axp809_regmap_irqs),
.num_regs = 5,
};
static struct mfd_cell axp20x_cells[] = {
{
.name = "axp20x-gpio",
.of_compatible = "x-powers,axp209-gpio",
}, {
.name = "axp20x-pek",
.num_resources = ARRAY_SIZE(axp20x_pek_resources),
.resources = axp20x_pek_resources,
}, {
.name = "axp20x-regulator",
}, {
.name = "axp20x-ac-power-supply",
.of_compatible = "x-powers,axp202-ac-power-supply",
.num_resources = ARRAY_SIZE(axp20x_ac_power_supply_resources),
.resources = axp20x_ac_power_supply_resources,
}, {
.name = "axp20x-usb-power-supply",
.of_compatible = "x-powers,axp202-usb-power-supply",
.num_resources = ARRAY_SIZE(axp20x_usb_power_supply_resources),
.resources = axp20x_usb_power_supply_resources,
},
};
static struct mfd_cell axp221_cells[] = {
{
.name = "axp20x-pek",
.num_resources = ARRAY_SIZE(axp22x_pek_resources),
.resources = axp22x_pek_resources,
}, {
.name = "axp20x-regulator",
}, {
.name = "axp20x-usb-power-supply",
.of_compatible = "x-powers,axp221-usb-power-supply",
.num_resources = ARRAY_SIZE(axp22x_usb_power_supply_resources),
.resources = axp22x_usb_power_supply_resources,
},
};
static struct mfd_cell axp223_cells[] = {
{
.name = "axp20x-pek",
.num_resources = ARRAY_SIZE(axp22x_pek_resources),
.resources = axp22x_pek_resources,
}, {
.name = "axp20x-regulator",
}, {
.name = "axp20x-usb-power-supply",
.of_compatible = "x-powers,axp223-usb-power-supply",
.num_resources = ARRAY_SIZE(axp22x_usb_power_supply_resources),
.resources = axp22x_usb_power_supply_resources,
},
};
static struct mfd_cell axp152_cells[] = {
{
.name = "axp20x-pek",
.num_resources = ARRAY_SIZE(axp152_pek_resources),
.resources = axp152_pek_resources,
},
};
static struct resource axp288_adc_resources[] = {
{
.name = "GPADC",
.start = AXP288_IRQ_GPADC,
.end = AXP288_IRQ_GPADC,
.flags = IORESOURCE_IRQ,
},
};
static struct resource axp288_extcon_resources[] = {
{
.start = AXP288_IRQ_VBUS_FALL,
.end = AXP288_IRQ_VBUS_FALL,
.flags = IORESOURCE_IRQ,
},
{
.start = AXP288_IRQ_VBUS_RISE,
.end = AXP288_IRQ_VBUS_RISE,
.flags = IORESOURCE_IRQ,
},
{
.start = AXP288_IRQ_MV_CHNG,
.end = AXP288_IRQ_MV_CHNG,
.flags = IORESOURCE_IRQ,
},
{
.start = AXP288_IRQ_BC_USB_CHNG,
.end = AXP288_IRQ_BC_USB_CHNG,
.flags = IORESOURCE_IRQ,
},
};
static struct resource axp288_charger_resources[] = {
{
.start = AXP288_IRQ_OV,
.end = AXP288_IRQ_OV,
.flags = IORESOURCE_IRQ,
},
{
.start = AXP288_IRQ_DONE,
.end = AXP288_IRQ_DONE,
.flags = IORESOURCE_IRQ,
},
{
.start = AXP288_IRQ_CHARGING,
.end = AXP288_IRQ_CHARGING,
.flags = IORESOURCE_IRQ,
},
{
.start = AXP288_IRQ_SAFE_QUIT,
.end = AXP288_IRQ_SAFE_QUIT,
.flags = IORESOURCE_IRQ,
},
{
.start = AXP288_IRQ_SAFE_ENTER,
.end = AXP288_IRQ_SAFE_ENTER,
.flags = IORESOURCE_IRQ,
},
{
.start = AXP288_IRQ_QCBTU,
.end = AXP288_IRQ_QCBTU,
.flags = IORESOURCE_IRQ,
},
{
.start = AXP288_IRQ_CBTU,
.end = AXP288_IRQ_CBTU,
.flags = IORESOURCE_IRQ,
},
{
.start = AXP288_IRQ_QCBTO,
.end = AXP288_IRQ_QCBTO,
.flags = IORESOURCE_IRQ,
},
{
.start = AXP288_IRQ_CBTO,
.end = AXP288_IRQ_CBTO,
.flags = IORESOURCE_IRQ,
},
};
static struct mfd_cell axp288_cells[] = {
{
.name = "axp288_adc",
.num_resources = ARRAY_SIZE(axp288_adc_resources),
.resources = axp288_adc_resources,
},
{
.name = "axp288_extcon",
.num_resources = ARRAY_SIZE(axp288_extcon_resources),
.resources = axp288_extcon_resources,
},
{
.name = "axp288_charger",
.num_resources = ARRAY_SIZE(axp288_charger_resources),
.resources = axp288_charger_resources,
},
{
.name = "axp288_fuel_gauge",
.num_resources = ARRAY_SIZE(axp288_fuel_gauge_resources),
.resources = axp288_fuel_gauge_resources,
},
{
.name = "axp20x-pek",
.num_resources = ARRAY_SIZE(axp288_power_button_resources),
.resources = axp288_power_button_resources,
},
{
.name = "axp288_pmic_acpi",
},
};
static struct mfd_cell axp806_cells[] = {
{
.id = 2,
.name = "axp20x-regulator",
},
};
static struct mfd_cell axp809_cells[] = {
{
.name = "axp20x-pek",
.num_resources = ARRAY_SIZE(axp809_pek_resources),
.resources = axp809_pek_resources,
}, {
.id = 1,
.name = "axp20x-regulator",
},
};
static struct axp20x_dev *axp20x_pm_power_off;
static void axp20x_power_off(void)
{
if (axp20x_pm_power_off->variant == AXP288_ID)
return;
regmap_write(axp20x_pm_power_off->regmap, AXP20X_OFF_CTRL,
AXP20X_OFF);
/* Give capacitors etc. time to drain to avoid kernel panic msg. */
msleep(500);
}
int axp20x_match_device(struct axp20x_dev *axp20x)
{
struct device *dev = axp20x->dev;
const struct acpi_device_id *acpi_id;
const struct of_device_id *of_id;
if (dev->of_node) {
of_id = of_match_device(dev->driver->of_match_table, dev);
if (!of_id) {
dev_err(dev, "Unable to match OF ID\n");
return -ENODEV;
}
axp20x->variant = (long)of_id->data;
} else {
acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev);
if (!acpi_id || !acpi_id->driver_data) {
dev_err(dev, "Unable to match ACPI ID and data\n");
return -ENODEV;
}
axp20x->variant = (long)acpi_id->driver_data;
}
switch (axp20x->variant) {
case AXP152_ID:
axp20x->nr_cells = ARRAY_SIZE(axp152_cells);
axp20x->cells = axp152_cells;
axp20x->regmap_cfg = &axp152_regmap_config;
axp20x->regmap_irq_chip = &axp152_regmap_irq_chip;
break;
case AXP202_ID:
case AXP209_ID:
axp20x->nr_cells = ARRAY_SIZE(axp20x_cells);
axp20x->cells = axp20x_cells;
axp20x->regmap_cfg = &axp20x_regmap_config;
axp20x->regmap_irq_chip = &axp20x_regmap_irq_chip;
break;
case AXP221_ID:
axp20x->nr_cells = ARRAY_SIZE(axp221_cells);
axp20x->cells = axp221_cells;
axp20x->regmap_cfg = &axp22x_regmap_config;
axp20x->regmap_irq_chip = &axp22x_regmap_irq_chip;
break;
case AXP223_ID:
axp20x->nr_cells = ARRAY_SIZE(axp223_cells);
axp20x->cells = axp223_cells;
axp20x->regmap_cfg = &axp22x_regmap_config;
axp20x->regmap_irq_chip = &axp22x_regmap_irq_chip;
break;
case AXP288_ID:
axp20x->cells = axp288_cells;
axp20x->nr_cells = ARRAY_SIZE(axp288_cells);
axp20x->regmap_cfg = &axp288_regmap_config;
axp20x->regmap_irq_chip = &axp288_regmap_irq_chip;
axp20x->irq_flags = IRQF_TRIGGER_LOW;
break;
case AXP806_ID:
axp20x->nr_cells = ARRAY_SIZE(axp806_cells);
axp20x->cells = axp806_cells;
axp20x->regmap_cfg = &axp806_regmap_config;
axp20x->regmap_irq_chip = &axp806_regmap_irq_chip;
break;
case AXP809_ID:
axp20x->nr_cells = ARRAY_SIZE(axp809_cells);
axp20x->cells = axp809_cells;
axp20x->regmap_cfg = &axp22x_regmap_config;
axp20x->regmap_irq_chip = &axp809_regmap_irq_chip;
break;
default:
dev_err(dev, "unsupported AXP20X ID %lu\n", axp20x->variant);
return -EINVAL;
}
dev_info(dev, "AXP20x variant %s found\n",
axp20x_model_names[axp20x->variant]);
return 0;
}
EXPORT_SYMBOL(axp20x_match_device);
int axp20x_device_probe(struct axp20x_dev *axp20x)
{
int ret;
/*
* The AXP806 supports either master/standalone or slave mode.
* Slave mode allows sharing the serial bus, even with multiple
* AXP806 which all have the same hardware address.
*
* This is done with extra "serial interface address extension",
* or AXP806_BUS_ADDR_EXT, and "register address extension", or
* AXP806_REG_ADDR_EXT, registers. The former is read-only, with
* 1 bit customizable at the factory, and 1 bit depending on the
* state of an external pin. The latter is writable. The device
* will only respond to operations to its other registers when
* the these device addressing bits (in the upper 4 bits of the
* registers) match.
*
* Since we only support an AXP806 chained to an AXP809 in slave
* mode, and there isn't any existing hardware which uses AXP806
* in master mode, or has 2 AXP806s in the same system, we can
* just program the register address extension to the slave mode
* address.
*/
if (axp20x->variant == AXP806_ID)
regmap_write(axp20x->regmap, AXP806_REG_ADDR_EXT,
AXP806_REG_ADDR_EXT_ADDR_SLAVE_MODE);
ret = regmap_add_irq_chip(axp20x->regmap, axp20x->irq,
IRQF_ONESHOT | IRQF_SHARED | axp20x->irq_flags,
-1, axp20x->regmap_irq_chip, &axp20x->regmap_irqc);
if (ret) {
dev_err(axp20x->dev, "failed to add irq chip: %d\n", ret);
return ret;
}
ret = mfd_add_devices(axp20x->dev, -1, axp20x->cells,
axp20x->nr_cells, NULL, 0, NULL);
if (ret) {
dev_err(axp20x->dev, "failed to add MFD devices: %d\n", ret);
regmap_del_irq_chip(axp20x->irq, axp20x->regmap_irqc);
return ret;
}
if (!pm_power_off) {
axp20x_pm_power_off = axp20x;
pm_power_off = axp20x_power_off;
}
dev_info(axp20x->dev, "AXP20X driver loaded\n");
return 0;
}
EXPORT_SYMBOL(axp20x_device_probe);
int axp20x_device_remove(struct axp20x_dev *axp20x)
{
if (axp20x == axp20x_pm_power_off) {
axp20x_pm_power_off = NULL;
pm_power_off = NULL;
}
mfd_remove_devices(axp20x->dev);
regmap_del_irq_chip(axp20x->irq, axp20x->regmap_irqc);
return 0;
}
EXPORT_SYMBOL(axp20x_device_remove);
MODULE_DESCRIPTION("PMIC MFD core driver for AXP20X");
MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink