mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-15 06:55:13 +08:00
9e264f3f85
Supporting multi-cs in spi drivers would require the chip_select & cs_gpiod members of struct spi_device to be an array. But changing the type of these members to array would break the spi driver functionality. To make the transition smoother introduced four new APIs to get/set the spi->chip_select & spi->cs_gpiod and replaced all spi->chip_select and spi->cs_gpiod references with get or set API calls. While adding multi-cs support in further patches the chip_select & cs_gpiod members of the spi_device structure would be converted to arrays & the "idx" parameter of the APIs would be used as array index i.e., spi->chip_select[idx] & spi->cs_gpiod[idx] respectively. Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Acked-by: Heiko Stuebner <heiko@sntech.de> # Rockchip drivers Reviewed-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> # Aspeed driver Reviewed-by: Dhruva Gole <d-gole@ti.com> # SPI Cadence QSPI Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> # spi-stm32-qspi Acked-by: William Zhang <william.zhang@broadcom.com> # bcm63xx-hsspi driver Reviewed-by: Serge Semin <fancer.lancer@gmail.com> # DW SSI part Link: https://lore.kernel.org/r/167847070432.26.15076794204368669839@mailman-core.alsa-project.org Signed-off-by: Mark Brown <broonie@kernel.org>
322 lines
7.5 KiB
C
322 lines
7.5 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/* Copyright (C) 2022 Hewlett-Packard Development Company, L.P. */
|
|
|
|
#include <linux/iopoll.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/spi-mem.h>
|
|
|
|
#define GXP_SPI0_MAX_CHIPSELECT 2
|
|
#define GXP_SPI_SLEEP_TIME 1
|
|
#define GXP_SPI_TIMEOUT (130 * 1000000 / GXP_SPI_SLEEP_TIME)
|
|
|
|
#define MANUAL_MODE 0
|
|
#define DIRECT_MODE 1
|
|
#define SPILDAT_LEN 256
|
|
|
|
#define OFFSET_SPIMCFG 0x0
|
|
#define OFFSET_SPIMCTRL 0x4
|
|
#define OFFSET_SPICMD 0x5
|
|
#define OFFSET_SPIDCNT 0x6
|
|
#define OFFSET_SPIADDR 0x8
|
|
#define OFFSET_SPIINTSTS 0xc
|
|
|
|
#define SPIMCTRL_START 0x01
|
|
#define SPIMCTRL_BUSY 0x02
|
|
#define SPIMCTRL_DIR 0x08
|
|
|
|
struct gxp_spi;
|
|
|
|
struct gxp_spi_chip {
|
|
struct gxp_spi *spifi;
|
|
u32 cs;
|
|
};
|
|
|
|
struct gxp_spi_data {
|
|
u32 max_cs;
|
|
u32 mode_bits;
|
|
};
|
|
|
|
struct gxp_spi {
|
|
const struct gxp_spi_data *data;
|
|
void __iomem *reg_base;
|
|
void __iomem *dat_base;
|
|
void __iomem *dir_base;
|
|
struct device *dev;
|
|
struct gxp_spi_chip chips[GXP_SPI0_MAX_CHIPSELECT];
|
|
};
|
|
|
|
static void gxp_spi_set_mode(struct gxp_spi *spifi, int mode)
|
|
{
|
|
u8 value;
|
|
void __iomem *reg_base = spifi->reg_base;
|
|
|
|
value = readb(reg_base + OFFSET_SPIMCTRL);
|
|
|
|
if (mode == MANUAL_MODE) {
|
|
writeb(0x55, reg_base + OFFSET_SPICMD);
|
|
writeb(0xaa, reg_base + OFFSET_SPICMD);
|
|
value &= ~0x30;
|
|
} else {
|
|
value |= 0x30;
|
|
}
|
|
writeb(value, reg_base + OFFSET_SPIMCTRL);
|
|
}
|
|
|
|
static int gxp_spi_read_reg(struct gxp_spi_chip *chip, const struct spi_mem_op *op)
|
|
{
|
|
int ret;
|
|
struct gxp_spi *spifi = chip->spifi;
|
|
void __iomem *reg_base = spifi->reg_base;
|
|
u32 value;
|
|
|
|
value = readl(reg_base + OFFSET_SPIMCFG);
|
|
value &= ~(1 << 24);
|
|
value |= (chip->cs << 24);
|
|
value &= ~(0x07 << 16);
|
|
value &= ~(0x1f << 19);
|
|
writel(value, reg_base + OFFSET_SPIMCFG);
|
|
|
|
writel(0, reg_base + OFFSET_SPIADDR);
|
|
|
|
writeb(op->cmd.opcode, reg_base + OFFSET_SPICMD);
|
|
|
|
writew(op->data.nbytes, reg_base + OFFSET_SPIDCNT);
|
|
|
|
value = readb(reg_base + OFFSET_SPIMCTRL);
|
|
value &= ~SPIMCTRL_DIR;
|
|
value |= SPIMCTRL_START;
|
|
|
|
writeb(value, reg_base + OFFSET_SPIMCTRL);
|
|
|
|
ret = readb_poll_timeout(reg_base + OFFSET_SPIMCTRL, value,
|
|
!(value & SPIMCTRL_BUSY),
|
|
GXP_SPI_SLEEP_TIME, GXP_SPI_TIMEOUT);
|
|
if (ret) {
|
|
dev_warn(spifi->dev, "read reg busy time out\n");
|
|
return ret;
|
|
}
|
|
|
|
memcpy_fromio(op->data.buf.in, spifi->dat_base, op->data.nbytes);
|
|
return ret;
|
|
}
|
|
|
|
static int gxp_spi_write_reg(struct gxp_spi_chip *chip, const struct spi_mem_op *op)
|
|
{
|
|
int ret;
|
|
struct gxp_spi *spifi = chip->spifi;
|
|
void __iomem *reg_base = spifi->reg_base;
|
|
u32 value;
|
|
|
|
value = readl(reg_base + OFFSET_SPIMCFG);
|
|
value &= ~(1 << 24);
|
|
value |= (chip->cs << 24);
|
|
value &= ~(0x07 << 16);
|
|
value &= ~(0x1f << 19);
|
|
writel(value, reg_base + OFFSET_SPIMCFG);
|
|
|
|
writel(0, reg_base + OFFSET_SPIADDR);
|
|
|
|
writeb(op->cmd.opcode, reg_base + OFFSET_SPICMD);
|
|
|
|
memcpy_toio(spifi->dat_base, op->data.buf.in, op->data.nbytes);
|
|
|
|
writew(op->data.nbytes, reg_base + OFFSET_SPIDCNT);
|
|
|
|
value = readb(reg_base + OFFSET_SPIMCTRL);
|
|
value |= SPIMCTRL_DIR;
|
|
value |= SPIMCTRL_START;
|
|
|
|
writeb(value, reg_base + OFFSET_SPIMCTRL);
|
|
|
|
ret = readb_poll_timeout(reg_base + OFFSET_SPIMCTRL, value,
|
|
!(value & SPIMCTRL_BUSY),
|
|
GXP_SPI_SLEEP_TIME, GXP_SPI_TIMEOUT);
|
|
if (ret)
|
|
dev_warn(spifi->dev, "write reg busy time out\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t gxp_spi_read(struct gxp_spi_chip *chip, const struct spi_mem_op *op)
|
|
{
|
|
struct gxp_spi *spifi = chip->spifi;
|
|
u32 offset = op->addr.val;
|
|
|
|
if (chip->cs == 0)
|
|
offset += 0x4000000;
|
|
|
|
memcpy_fromio(op->data.buf.in, spifi->dir_base + offset, op->data.nbytes);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t gxp_spi_write(struct gxp_spi_chip *chip, const struct spi_mem_op *op)
|
|
{
|
|
struct gxp_spi *spifi = chip->spifi;
|
|
void __iomem *reg_base = spifi->reg_base;
|
|
u32 write_len;
|
|
u32 value;
|
|
int ret;
|
|
|
|
write_len = op->data.nbytes;
|
|
if (write_len > SPILDAT_LEN)
|
|
write_len = SPILDAT_LEN;
|
|
|
|
value = readl(reg_base + OFFSET_SPIMCFG);
|
|
value &= ~(1 << 24);
|
|
value |= (chip->cs << 24);
|
|
value &= ~(0x07 << 16);
|
|
value |= (op->addr.nbytes << 16);
|
|
value &= ~(0x1f << 19);
|
|
writel(value, reg_base + OFFSET_SPIMCFG);
|
|
|
|
writel(op->addr.val, reg_base + OFFSET_SPIADDR);
|
|
|
|
writeb(op->cmd.opcode, reg_base + OFFSET_SPICMD);
|
|
|
|
writew(write_len, reg_base + OFFSET_SPIDCNT);
|
|
|
|
memcpy_toio(spifi->dat_base, op->data.buf.in, write_len);
|
|
|
|
value = readb(reg_base + OFFSET_SPIMCTRL);
|
|
value |= SPIMCTRL_DIR;
|
|
value |= SPIMCTRL_START;
|
|
|
|
writeb(value, reg_base + OFFSET_SPIMCTRL);
|
|
|
|
ret = readb_poll_timeout(reg_base + OFFSET_SPIMCTRL, value,
|
|
!(value & SPIMCTRL_BUSY),
|
|
GXP_SPI_SLEEP_TIME, GXP_SPI_TIMEOUT);
|
|
if (ret) {
|
|
dev_warn(spifi->dev, "write busy time out\n");
|
|
return ret;
|
|
}
|
|
|
|
return write_len;
|
|
}
|
|
|
|
static int do_gxp_exec_mem_op(struct spi_mem *mem, const struct spi_mem_op *op)
|
|
{
|
|
struct gxp_spi *spifi = spi_controller_get_devdata(mem->spi->master);
|
|
struct gxp_spi_chip *chip = &spifi->chips[spi_get_chipselect(mem->spi, 0)];
|
|
int ret;
|
|
|
|
if (op->data.dir == SPI_MEM_DATA_IN) {
|
|
if (!op->addr.nbytes)
|
|
ret = gxp_spi_read_reg(chip, op);
|
|
else
|
|
ret = gxp_spi_read(chip, op);
|
|
} else {
|
|
if (!op->addr.nbytes)
|
|
ret = gxp_spi_write_reg(chip, op);
|
|
else
|
|
ret = gxp_spi_write(chip, op);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int gxp_exec_mem_op(struct spi_mem *mem, const struct spi_mem_op *op)
|
|
{
|
|
int ret;
|
|
|
|
ret = do_gxp_exec_mem_op(mem, op);
|
|
if (ret)
|
|
dev_err(&mem->spi->dev, "operation failed: %d", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct spi_controller_mem_ops gxp_spi_mem_ops = {
|
|
.exec_op = gxp_exec_mem_op,
|
|
};
|
|
|
|
static int gxp_spi_setup(struct spi_device *spi)
|
|
{
|
|
struct gxp_spi *spifi = spi_controller_get_devdata(spi->master);
|
|
unsigned int cs = spi_get_chipselect(spi, 0);
|
|
struct gxp_spi_chip *chip = &spifi->chips[cs];
|
|
|
|
chip->spifi = spifi;
|
|
chip->cs = cs;
|
|
|
|
gxp_spi_set_mode(spifi, MANUAL_MODE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gxp_spifi_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
const struct gxp_spi_data *data;
|
|
struct spi_controller *ctlr;
|
|
struct gxp_spi *spifi;
|
|
int ret;
|
|
|
|
data = of_device_get_match_data(&pdev->dev);
|
|
|
|
ctlr = devm_spi_alloc_master(dev, sizeof(*spifi));
|
|
if (!ctlr)
|
|
return -ENOMEM;
|
|
|
|
spifi = spi_controller_get_devdata(ctlr);
|
|
|
|
platform_set_drvdata(pdev, spifi);
|
|
spifi->data = data;
|
|
spifi->dev = dev;
|
|
|
|
spifi->reg_base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(spifi->reg_base))
|
|
return PTR_ERR(spifi->reg_base);
|
|
|
|
spifi->dat_base = devm_platform_ioremap_resource(pdev, 1);
|
|
if (IS_ERR(spifi->dat_base))
|
|
return PTR_ERR(spifi->dat_base);
|
|
|
|
spifi->dir_base = devm_platform_ioremap_resource(pdev, 2);
|
|
if (IS_ERR(spifi->dir_base))
|
|
return PTR_ERR(spifi->dir_base);
|
|
|
|
ctlr->mode_bits = data->mode_bits;
|
|
ctlr->bus_num = pdev->id;
|
|
ctlr->mem_ops = &gxp_spi_mem_ops;
|
|
ctlr->setup = gxp_spi_setup;
|
|
ctlr->num_chipselect = data->max_cs;
|
|
ctlr->dev.of_node = dev->of_node;
|
|
|
|
ret = devm_spi_register_controller(dev, ctlr);
|
|
if (ret) {
|
|
return dev_err_probe(&pdev->dev, ret,
|
|
"failed to register spi controller\n");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct gxp_spi_data gxp_spifi_data = {
|
|
.max_cs = 2,
|
|
.mode_bits = 0,
|
|
};
|
|
|
|
static const struct of_device_id gxp_spifi_match[] = {
|
|
{.compatible = "hpe,gxp-spifi", .data = &gxp_spifi_data },
|
|
{ /* null */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, gxp_spifi_match);
|
|
|
|
static struct platform_driver gxp_spifi_driver = {
|
|
.probe = gxp_spifi_probe,
|
|
.driver = {
|
|
.name = "gxp-spifi",
|
|
.of_match_table = gxp_spifi_match,
|
|
},
|
|
};
|
|
module_platform_driver(gxp_spifi_driver);
|
|
|
|
MODULE_DESCRIPTION("HPE GXP SPI Flash Interface driver");
|
|
MODULE_AUTHOR("Nick Hawkins <nick.hawkins@hpe.com>");
|
|
MODULE_LICENSE("GPL");
|