mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-21 01:54:51 +08:00
daa5c4d016
If an interrupt is already pending when the interrupt is enabled on the
GXL phy, no IRQ will ever be triggered.
The fix is simply to make sure pending IRQs are cleared before setting
up the irq mask.
Fixes: cf127ff20a ("net: phy: meson-gxl: add interrupt support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
257 lines
6.5 KiB
C
257 lines
6.5 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Amlogic Meson GXL Internal PHY Driver
|
|
*
|
|
* Copyright (C) 2015 Amlogic, Inc. All rights reserved.
|
|
* Copyright (C) 2016 BayLibre, SAS. All rights reserved.
|
|
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/bitfield.h>
|
|
|
|
#define TSTCNTL 20
|
|
#define TSTCNTL_READ BIT(15)
|
|
#define TSTCNTL_WRITE BIT(14)
|
|
#define TSTCNTL_REG_BANK_SEL GENMASK(12, 11)
|
|
#define TSTCNTL_TEST_MODE BIT(10)
|
|
#define TSTCNTL_READ_ADDRESS GENMASK(9, 5)
|
|
#define TSTCNTL_WRITE_ADDRESS GENMASK(4, 0)
|
|
#define TSTREAD1 21
|
|
#define TSTWRITE 23
|
|
#define INTSRC_FLAG 29
|
|
#define INTSRC_ANEG_PR BIT(1)
|
|
#define INTSRC_PARALLEL_FAULT BIT(2)
|
|
#define INTSRC_ANEG_LP_ACK BIT(3)
|
|
#define INTSRC_LINK_DOWN BIT(4)
|
|
#define INTSRC_REMOTE_FAULT BIT(5)
|
|
#define INTSRC_ANEG_COMPLETE BIT(6)
|
|
#define INTSRC_MASK 30
|
|
|
|
#define BANK_ANALOG_DSP 0
|
|
#define BANK_WOL 1
|
|
#define BANK_BIST 3
|
|
|
|
/* WOL Registers */
|
|
#define LPI_STATUS 0xc
|
|
#define LPI_STATUS_RSV12 BIT(12)
|
|
|
|
/* BIST Registers */
|
|
#define FR_PLL_CONTROL 0x1b
|
|
#define FR_PLL_DIV0 0x1c
|
|
#define FR_PLL_DIV1 0x1d
|
|
|
|
static int meson_gxl_open_banks(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
/* Enable Analog and DSP register Bank access by
|
|
* toggling TSTCNTL_TEST_MODE bit in the TSTCNTL register
|
|
*/
|
|
ret = phy_write(phydev, TSTCNTL, 0);
|
|
if (ret)
|
|
return ret;
|
|
ret = phy_write(phydev, TSTCNTL, TSTCNTL_TEST_MODE);
|
|
if (ret)
|
|
return ret;
|
|
ret = phy_write(phydev, TSTCNTL, 0);
|
|
if (ret)
|
|
return ret;
|
|
return phy_write(phydev, TSTCNTL, TSTCNTL_TEST_MODE);
|
|
}
|
|
|
|
static void meson_gxl_close_banks(struct phy_device *phydev)
|
|
{
|
|
phy_write(phydev, TSTCNTL, 0);
|
|
}
|
|
|
|
static int meson_gxl_read_reg(struct phy_device *phydev,
|
|
unsigned int bank, unsigned int reg)
|
|
{
|
|
int ret;
|
|
|
|
ret = meson_gxl_open_banks(phydev);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = phy_write(phydev, TSTCNTL, TSTCNTL_READ |
|
|
FIELD_PREP(TSTCNTL_REG_BANK_SEL, bank) |
|
|
TSTCNTL_TEST_MODE |
|
|
FIELD_PREP(TSTCNTL_READ_ADDRESS, reg));
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = phy_read(phydev, TSTREAD1);
|
|
out:
|
|
/* Close the bank access on our way out */
|
|
meson_gxl_close_banks(phydev);
|
|
return ret;
|
|
}
|
|
|
|
static int meson_gxl_write_reg(struct phy_device *phydev,
|
|
unsigned int bank, unsigned int reg,
|
|
uint16_t value)
|
|
{
|
|
int ret;
|
|
|
|
ret = meson_gxl_open_banks(phydev);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = phy_write(phydev, TSTWRITE, value);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = phy_write(phydev, TSTCNTL, TSTCNTL_WRITE |
|
|
FIELD_PREP(TSTCNTL_REG_BANK_SEL, bank) |
|
|
TSTCNTL_TEST_MODE |
|
|
FIELD_PREP(TSTCNTL_WRITE_ADDRESS, reg));
|
|
|
|
out:
|
|
/* Close the bank access on our way out */
|
|
meson_gxl_close_banks(phydev);
|
|
return ret;
|
|
}
|
|
|
|
static int meson_gxl_config_init(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
/* Enable fractional PLL */
|
|
ret = meson_gxl_write_reg(phydev, BANK_BIST, FR_PLL_CONTROL, 0x5);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Program fraction FR_PLL_DIV1 */
|
|
ret = meson_gxl_write_reg(phydev, BANK_BIST, FR_PLL_DIV1, 0x029a);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Program fraction FR_PLL_DIV1 */
|
|
ret = meson_gxl_write_reg(phydev, BANK_BIST, FR_PLL_DIV0, 0xaaaa);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return genphy_config_init(phydev);
|
|
}
|
|
|
|
/* This function is provided to cope with the possible failures of this phy
|
|
* during aneg process. When aneg fails, the PHY reports that aneg is done
|
|
* but the value found in MII_LPA is wrong:
|
|
* - Early failures: MII_LPA is just 0x0001. if MII_EXPANSION reports that
|
|
* the link partner (LP) supports aneg but the LP never acked our base
|
|
* code word, it is likely that we never sent it to begin with.
|
|
* - Late failures: MII_LPA is filled with a value which seems to make sense
|
|
* but it actually is not what the LP is advertising. It seems that we
|
|
* can detect this using a magic bit in the WOL bank (reg 12 - bit 12).
|
|
* If this particular bit is not set when aneg is reported being done,
|
|
* it means MII_LPA is likely to be wrong.
|
|
*
|
|
* In both case, forcing a restart of the aneg process solve the problem.
|
|
* When this failure happens, the first retry is usually successful but,
|
|
* in some cases, it may take up to 6 retries to get a decent result
|
|
*/
|
|
static int meson_gxl_read_status(struct phy_device *phydev)
|
|
{
|
|
int ret, wol, lpa, exp;
|
|
|
|
if (phydev->autoneg == AUTONEG_ENABLE) {
|
|
ret = genphy_aneg_done(phydev);
|
|
if (ret < 0)
|
|
return ret;
|
|
else if (!ret)
|
|
goto read_status_continue;
|
|
|
|
/* Aneg is done, let's check everything is fine */
|
|
wol = meson_gxl_read_reg(phydev, BANK_WOL, LPI_STATUS);
|
|
if (wol < 0)
|
|
return wol;
|
|
|
|
lpa = phy_read(phydev, MII_LPA);
|
|
if (lpa < 0)
|
|
return lpa;
|
|
|
|
exp = phy_read(phydev, MII_EXPANSION);
|
|
if (exp < 0)
|
|
return exp;
|
|
|
|
if (!(wol & LPI_STATUS_RSV12) ||
|
|
((exp & EXPANSION_NWAY) && !(lpa & LPA_LPACK))) {
|
|
/* Looks like aneg failed after all */
|
|
phydev_dbg(phydev, "LPA corruption - aneg restart\n");
|
|
return genphy_restart_aneg(phydev);
|
|
}
|
|
}
|
|
|
|
read_status_continue:
|
|
return genphy_read_status(phydev);
|
|
}
|
|
|
|
static int meson_gxl_ack_interrupt(struct phy_device *phydev)
|
|
{
|
|
int ret = phy_read(phydev, INTSRC_FLAG);
|
|
|
|
return ret < 0 ? ret : 0;
|
|
}
|
|
|
|
static int meson_gxl_config_intr(struct phy_device *phydev)
|
|
{
|
|
u16 val;
|
|
int ret;
|
|
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
|
|
val = INTSRC_ANEG_PR
|
|
| INTSRC_PARALLEL_FAULT
|
|
| INTSRC_ANEG_LP_ACK
|
|
| INTSRC_LINK_DOWN
|
|
| INTSRC_REMOTE_FAULT
|
|
| INTSRC_ANEG_COMPLETE;
|
|
} else {
|
|
val = 0;
|
|
}
|
|
|
|
/* Ack any pending IRQ */
|
|
ret = meson_gxl_ack_interrupt(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return phy_write(phydev, INTSRC_MASK, val);
|
|
}
|
|
|
|
static struct phy_driver meson_gxl_phy[] = {
|
|
{
|
|
.phy_id = 0x01814400,
|
|
.phy_id_mask = 0xfffffff0,
|
|
.name = "Meson GXL Internal PHY",
|
|
.features = PHY_BASIC_FEATURES,
|
|
.flags = PHY_IS_INTERNAL,
|
|
.soft_reset = genphy_soft_reset,
|
|
.config_init = meson_gxl_config_init,
|
|
.aneg_done = genphy_aneg_done,
|
|
.read_status = meson_gxl_read_status,
|
|
.ack_interrupt = meson_gxl_ack_interrupt,
|
|
.config_intr = meson_gxl_config_intr,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
},
|
|
};
|
|
|
|
static struct mdio_device_id __maybe_unused meson_gxl_tbl[] = {
|
|
{ 0x01814400, 0xfffffff0 },
|
|
{ }
|
|
};
|
|
|
|
module_phy_driver(meson_gxl_phy);
|
|
|
|
MODULE_DEVICE_TABLE(mdio, meson_gxl_tbl);
|
|
|
|
MODULE_DESCRIPTION("Amlogic Meson GXL Internal PHY driver");
|
|
MODULE_AUTHOR("Baoqi wang");
|
|
MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
|
|
MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
|
|
MODULE_LICENSE("GPL");
|