linux/arch/arm/mach-pxa/pxa27x.c
Linus Torvalds bf1fa6f155 ARM: SoC changes for 6.5
These are mostly minor cleanups and bugfixes that address harmless
 problems.
 
 The largest branch is a conversion of the omap platform
 to use GPIO descriptors throughout the tree, for any devices that
 are not fully converted to devicetree.
 
 The Samsung Exynos platform gains back support for the Exynos4212
 chip that was previously unused and removed but is now used for
 the Samsung Galaxy Tab3.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmScsH8ACgkQYKtH/8kJ
 UicTOhAAxQB1zySNJ4vOwTnV9Mrey+b/1RvjKDwZAa3uuP6vgpPjAjqVxlRxl+TM
 SWal+0zzj+vrFTkTl0niT+DzMFOEnLqhBd7smN8YKmC+hD3t9g5Dos7Q/IsUVlrT
 SnXDmit+eSI2QXFeO1OM0LdmniLDcKydsQ8o4beKF6YaJRGYACNSmtIjB3KvWccv
 3cQXoaqN5rFoQxbLiGVINVyDU3Qpie2m8RqUcVWSmva46UM2yDAUWXwFNxcP8jXp
 WjL+NaiH7Ea/pzPcn3895u5ybIOZSylxLGRzL1ktewJqczUKf701qVZbf6enZp99
 SbEQQh4DKm4DkpQ/JdPoO9x3InORAGUQ1p0Ssa92rKuiEVSXsQUeO3BNAYGfvpy3
 o3QElSp6hlDWOHk9KawHzY3lfMsvKnTckFQDZxMbvC0+tQj6cDIM/qWo74CdZ07S
 UxVa1C9L2Lerv6IAG3v2meI9HjBn7DInWjfOAOxj2gX/ryIrdX9lO0692n6nVYca
 szH3CANjwPCPrtjAE2RXPjLTK+6nmQDavcEVEiG1SoGTplLh7RZgeQXV+5iIaOLp
 Nc8MDddR656kPBEprgoEugGZuLjsY2IGaLj+FNGriOEBKo5jpfEFeRQ2GPKxoyWR
 OHeWtxcFtBc2SnfVOtdMQ/X3UZTd4vlJYbNffiL+2NSM0iMBbHs=
 =z6FU
 -----END PGP SIGNATURE-----

Merge tag 'soc-arm-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC updates from Arnd Bergmann:
 "These are mostly minor cleanups and bugfixes that address harmless
  problems.

  The largest branch is a conversion of the omap platform to use GPIO
  descriptors throughout the tree, for any devices that are not fully
  converted to devicetree.

  The Samsung Exynos platform gains back support for the Exynos4212 chip
  that was previously unused and removed but is now used for the Samsung
  Galaxy Tab3"

* tag 'soc-arm-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
  ARM: omap2: Fix copy/paste bug
  MAINTAINERS: Replace my email address
  Input: ads7846 - fix pointer cast warning
  Input: ads7846 - Fix usage of match data
  ARM: omap2: Fix checkpatch issues
  arm: omap1: replace printk() with pr_err macro
  ARM: omap: Fix checkpatch issues
  ARM: s3c: Switch i2c drivers back to use .probe()
  ARM: versatile: mark mmc_status() static
  ARM: spear: include "pl080.h" for pl080_get_signal() prototype
  ARM: sa1100: address missing prototype warnings
  ARM: pxa: fix missing-prototypes warnings
  ARM: orion5x: fix d2net gpio initialization
  ARM: omap2: fix missing tick_broadcast() prototype
  ARM: omap1: add missing include
  ARM: lpc32xx: add missing include
  ARM: imx: add missing include
  ARM: highbank: add missing include
  ARM: ep93xx: fix missing-prototype warnings
  ARM: davinci: fix davinci_cpufreq_init() declaration
  ...
2023-06-29 15:28:33 -07:00

360 lines
8.7 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/pxa27x.c
*
* Author: Nicolas Pitre
* Created: Nov 05, 2002
* Copyright: MontaVista Software Inc.
*
* Code specific to PXA27x aka Bulverde.
*/
#include <linux/dmaengine.h>
#include <linux/dma/pxa-dma.h>
#include <linux/gpio.h>
#include <linux/gpio-pxa.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irqchip.h>
#include <linux/suspend.h>
#include <linux/platform_device.h>
#include <linux/syscore_ops.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/platform_data/i2c-pxa.h>
#include <linux/platform_data/mmp_dma.h>
#include <linux/soc/pxa/cpu.h>
#include <linux/soc/pxa/smemc.h>
#include <asm/mach/map.h>
#include <asm/irq.h>
#include <asm/suspend.h>
#include "irqs.h"
#include "pxa27x.h"
#include "reset.h"
#include <linux/platform_data/pxa2xx_udc.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <linux/platform_data/asoc-pxa.h>
#include "pm.h"
#include "addr-map.h"
#include "smemc.h"
#include "generic.h"
#include "devices.h"
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
void pxa27x_clear_otgph(void)
{
if (cpu_is_pxa27x() && (PSSR & PSSR_OTGPH))
PSSR |= PSSR_OTGPH;
}
EXPORT_SYMBOL(pxa27x_clear_otgph);
static unsigned long ac97_reset_config[] = {
GPIO113_AC97_nRESET_GPIO_HIGH,
GPIO113_AC97_nRESET,
GPIO95_AC97_nRESET_GPIO_HIGH,
GPIO95_AC97_nRESET,
};
void pxa27x_configure_ac97reset(int reset_gpio, bool to_gpio)
{
/*
* This helper function is used to work around a bug in the pxa27x's
* ac97 controller during a warm reset. The configuration of the
* reset_gpio is changed as follows:
* to_gpio == true: configured to generic output gpio and driven high
* to_gpio == false: configured to ac97 controller alt fn AC97_nRESET
*/
if (reset_gpio == 113)
pxa2xx_mfp_config(to_gpio ? &ac97_reset_config[0] :
&ac97_reset_config[1], 1);
if (reset_gpio == 95)
pxa2xx_mfp_config(to_gpio ? &ac97_reset_config[2] :
&ac97_reset_config[3], 1);
}
EXPORT_SYMBOL_GPL(pxa27x_configure_ac97reset);
#ifdef CONFIG_PM
#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
/*
* allow platforms to override default PWRMODE setting used for PM_SUSPEND_MEM
*/
static unsigned int pwrmode = PWRMODE_SLEEP;
/*
* List of global PXA peripheral registers to preserve.
* More ones like CP and general purpose register values are preserved
* with the stack pointer in sleep.S.
*/
enum {
SLEEP_SAVE_PSTR,
SLEEP_SAVE_MDREFR,
SLEEP_SAVE_PCFR,
SLEEP_SAVE_COUNT
};
static void pxa27x_cpu_pm_save(unsigned long *sleep_save)
{
sleep_save[SLEEP_SAVE_MDREFR] = __raw_readl(MDREFR);
SAVE(PCFR);
SAVE(PSTR);
}
static void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
{
__raw_writel(sleep_save[SLEEP_SAVE_MDREFR], MDREFR);
RESTORE(PCFR);
PSSR = PSSR_RDH | PSSR_PH;
RESTORE(PSTR);
}
static void pxa27x_cpu_pm_enter(suspend_state_t state)
{
extern void pxa_cpu_standby(void);
#ifndef CONFIG_IWMMXT
u64 acc0;
#ifndef CONFIG_AS_IS_LLVM
asm volatile(".arch_extension xscale\n\t"
"mra %Q0, %R0, acc0" : "=r" (acc0));
#else
asm volatile("mrrc p0, 0, %Q0, %R0, c0" : "=r" (acc0));
#endif
#endif
/* ensure voltage-change sequencer not initiated, which hangs */
PCFR &= ~PCFR_FVC;
/* Clear edge-detect status register. */
PEDR = 0xDF12FE1B;
/* Clear reset status */
RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
switch (state) {
case PM_SUSPEND_STANDBY:
pxa_cpu_standby();
break;
case PM_SUSPEND_MEM:
cpu_suspend(pwrmode, pxa27x_finish_suspend);
#ifndef CONFIG_IWMMXT
#ifndef CONFIG_AS_IS_LLVM
asm volatile(".arch_extension xscale\n\t"
"mar acc0, %Q0, %R0" : "=r" (acc0));
#else
asm volatile("mcrr p0, 0, %Q0, %R0, c0" :: "r" (acc0));
#endif
#endif
break;
}
}
static int pxa27x_cpu_pm_valid(suspend_state_t state)
{
return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
}
static int pxa27x_cpu_pm_prepare(void)
{
/* set resume return address */
PSPR = __pa_symbol(cpu_resume);
return 0;
}
static void pxa27x_cpu_pm_finish(void)
{
/* ensure not to come back here if it wasn't intended */
PSPR = 0;
}
static struct pxa_cpu_pm_fns pxa27x_cpu_pm_fns = {
.save_count = SLEEP_SAVE_COUNT,
.save = pxa27x_cpu_pm_save,
.restore = pxa27x_cpu_pm_restore,
.valid = pxa27x_cpu_pm_valid,
.enter = pxa27x_cpu_pm_enter,
.prepare = pxa27x_cpu_pm_prepare,
.finish = pxa27x_cpu_pm_finish,
};
static void __init pxa27x_init_pm(void)
{
pxa_cpu_pm_fns = &pxa27x_cpu_pm_fns;
}
#else
static inline void pxa27x_init_pm(void) {}
#endif
/* PXA27x: Various gpios can issue wakeup events. This logic only
* handles the simple cases, not the WEMUX2 and WEMUX3 options
*/
static int pxa27x_set_wake(struct irq_data *d, unsigned int on)
{
int gpio = pxa_irq_to_gpio(d->irq);
uint32_t mask;
if (gpio >= 0 && gpio < 128)
return gpio_set_wake(gpio, on);
if (d->irq == IRQ_KEYPAD)
return keypad_set_wake(on);
switch (d->irq) {
case IRQ_RTCAlrm:
mask = PWER_RTC;
break;
case IRQ_USB:
mask = 1u << 26;
break;
default:
return -EINVAL;
}
if (on)
PWER |= mask;
else
PWER &=~mask;
return 0;
}
void __init pxa27x_init_irq(void)
{
pxa_init_irq(34, pxa27x_set_wake);
set_handle_irq(pxa27x_handle_irq);
}
static int __init
pxa27x_dt_init_irq(struct device_node *node, struct device_node *parent)
{
pxa_dt_irq_init(pxa27x_set_wake);
set_handle_irq(ichp_handle_irq);
return 0;
}
IRQCHIP_DECLARE(pxa27x_intc, "marvell,pxa-intc", pxa27x_dt_init_irq);
static struct map_desc pxa27x_io_desc[] __initdata = {
{ /* Mem Ctl */
.virtual = (unsigned long)SMEMC_VIRT,
.pfn = __phys_to_pfn(PXA2XX_SMEMC_BASE),
.length = SMEMC_SIZE,
.type = MT_DEVICE
}, { /* UNCACHED_PHYS_0 */
.virtual = UNCACHED_PHYS_0,
.pfn = __phys_to_pfn(0x00000000),
.length = UNCACHED_PHYS_0_SIZE,
.type = MT_DEVICE
},
};
void __init pxa27x_map_io(void)
{
pxa_map_io();
iotable_init(ARRAY_AND_SIZE(pxa27x_io_desc));
pxa27x_get_clk_frequency_khz(1);
}
/*
* device registration specific to PXA27x.
*/
void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
{
local_irq_disable();
PCFR |= PCFR_PI2CEN;
local_irq_enable();
pxa_register_device(&pxa27x_device_i2c_power, info);
}
static struct pxa_gpio_platform_data pxa27x_gpio_info __initdata = {
.irq_base = PXA_GPIO_TO_IRQ(0),
.gpio_set_wake = gpio_set_wake,
};
static struct platform_device *devices[] __initdata = {
&pxa27x_device_udc,
&pxa_device_pmu,
&pxa_device_i2s,
&pxa_device_asoc_ssp1,
&pxa_device_asoc_ssp2,
&pxa_device_asoc_ssp3,
&pxa_device_asoc_platform,
&pxa_device_rtc,
&pxa27x_device_ssp1,
&pxa27x_device_ssp2,
&pxa27x_device_ssp3,
&pxa27x_device_pwm0,
&pxa27x_device_pwm1,
};
static const struct dma_slave_map pxa27x_slave_map[] = {
/* PXA25x, PXA27x and PXA3xx common entries */
{ "pxa2xx-ac97", "pcm_pcm_mic_mono", PDMA_FILTER_PARAM(LOWEST, 8) },
{ "pxa2xx-ac97", "pcm_pcm_aux_mono_in", PDMA_FILTER_PARAM(LOWEST, 9) },
{ "pxa2xx-ac97", "pcm_pcm_aux_mono_out",
PDMA_FILTER_PARAM(LOWEST, 10) },
{ "pxa2xx-ac97", "pcm_pcm_stereo_in", PDMA_FILTER_PARAM(LOWEST, 11) },
{ "pxa2xx-ac97", "pcm_pcm_stereo_out", PDMA_FILTER_PARAM(LOWEST, 12) },
{ "pxa-ssp-dai.0", "rx", PDMA_FILTER_PARAM(LOWEST, 13) },
{ "pxa-ssp-dai.0", "tx", PDMA_FILTER_PARAM(LOWEST, 14) },
{ "pxa-ssp-dai.1", "rx", PDMA_FILTER_PARAM(LOWEST, 15) },
{ "pxa-ssp-dai.1", "tx", PDMA_FILTER_PARAM(LOWEST, 16) },
{ "pxa2xx-ir", "rx", PDMA_FILTER_PARAM(LOWEST, 17) },
{ "pxa2xx-ir", "tx", PDMA_FILTER_PARAM(LOWEST, 18) },
{ "pxa2xx-mci.0", "rx", PDMA_FILTER_PARAM(LOWEST, 21) },
{ "pxa2xx-mci.0", "tx", PDMA_FILTER_PARAM(LOWEST, 22) },
{ "pxa-ssp-dai.2", "rx", PDMA_FILTER_PARAM(LOWEST, 66) },
{ "pxa-ssp-dai.2", "tx", PDMA_FILTER_PARAM(LOWEST, 67) },
/* PXA27x specific map */
{ "pxa2xx-i2s", "rx", PDMA_FILTER_PARAM(LOWEST, 2) },
{ "pxa2xx-i2s", "tx", PDMA_FILTER_PARAM(LOWEST, 3) },
{ "pxa27x-camera.0", "CI_Y", PDMA_FILTER_PARAM(HIGHEST, 68) },
{ "pxa27x-camera.0", "CI_U", PDMA_FILTER_PARAM(HIGHEST, 69) },
{ "pxa27x-camera.0", "CI_V", PDMA_FILTER_PARAM(HIGHEST, 70) },
};
static struct mmp_dma_platdata pxa27x_dma_pdata = {
.dma_channels = 32,
.nb_requestors = 75,
.slave_map = pxa27x_slave_map,
.slave_map_cnt = ARRAY_SIZE(pxa27x_slave_map),
};
static int __init pxa27x_init(void)
{
int ret = 0;
if (cpu_is_pxa27x()) {
pxa_register_wdt(RCSR);
pxa27x_init_pm();
register_syscore_ops(&pxa_irq_syscore_ops);
register_syscore_ops(&pxa2xx_mfp_syscore_ops);
if (!of_have_populated_dt()) {
pxa_register_device(&pxa27x_device_gpio,
&pxa27x_gpio_info);
pxa2xx_set_dmac_info(&pxa27x_dma_pdata);
ret = platform_add_devices(devices,
ARRAY_SIZE(devices));
}
}
return ret;
}
postcore_initcall(pxa27x_init);