mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-14 06:24:53 +08:00
845b978a87
smatch warns that the RC query code could go past the array size:
drivers/media/usb/dvb-usb-v2/rtl28xxu.c:1757 rtl2832u_rc_query() error: buffer overflow 'buf' 128 <= 130
drivers/media/usb/dvb-usb-v2/rtl28xxu.c:1758 rtl2832u_rc_query() error: buffer overflow 'buf' 128 <= 130
The driver logic gets the length of the IR RX buffer with:
ret = rtl28xxu_rd_reg(d, IR_RX_BC, &buf[0]);
...
len = buf[0];
In thesis, this could range between 0 and 255 [1].
While this should never happen in practice, due to hardware limits,
smatch is right when it complains about that, as there's nothing at
the logic that would prevent it. So, if for whatever reason, buf[0]
gets filled by rtl28xx read functions with a value bigger than 128,
it will go past the array.
So, add an explicit check.
[1] I've no idea why smatch thinks that the maximum value is 130.
I double-checked the code several times. Was unable to find any
reason for assuming 130. Perhaps smatch is not properly parsing
u8 here?
Fixes:
|
||
|---|---|---|
| .. | ||
| airspy | ||
| as102 | ||
| au0828 | ||
| b2c2 | ||
| cpia2 | ||
| cx231xx | ||
| dvb-usb | ||
| dvb-usb-v2 | ||
| em28xx | ||
| go7007 | ||
| gspca | ||
| hackrf | ||
| hdpvr | ||
| msi2500 | ||
| pulse8-cec | ||
| pvrusb2 | ||
| pwc | ||
| rainshadow-cec | ||
| s2255 | ||
| siano | ||
| stk1160 | ||
| stkwebcam | ||
| tm6000 | ||
| ttusb-budget | ||
| ttusb-dec | ||
| usbtv | ||
| usbvision | ||
| uvc | ||
| zr364xx | ||
| Kconfig | ||
| Makefile | ||