linux/drivers/net/ethernet/ti/davinci_mdio.c
Stephen Boyd 0e658fdd4b drivers: net: davinci_mdio: Use of_device_get_match_data()
Use the more modern API to get the match data out of the of match table.
This saves some code, lines, and nicely avoids referencing the match
table when it is undefined with configurations where CONFIG_OF=n.

Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: <linux-omap@vger.kernel.org>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210123034428.2841052-3-swboyd@chromium.org
2021-01-26 12:17:31 -06:00

537 lines
12 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* DaVinci MDIO Module driver
*
* Copyright (C) 2010 Texas Instruments.
*
* Shamelessly ripped out of davinci_emac.c, original copyrights follow:
*
* Copyright (C) 2009 Texas Instruments.
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/phy.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/pm_runtime.h>
#include <linux/davinci_emac.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_mdio.h>
#include <linux/pinctrl/consumer.h>
/*
* This timeout definition is a worst-case ultra defensive measure against
* unexpected controller lock ups. Ideally, we should never ever hit this
* scenario in practice.
*/
#define MDIO_TIMEOUT 100 /* msecs */
#define PHY_REG_MASK 0x1f
#define PHY_ID_MASK 0x1f
#define DEF_OUT_FREQ 2200000 /* 2.2 MHz */
struct davinci_mdio_of_param {
int autosuspend_delay_ms;
};
struct davinci_mdio_regs {
u32 version;
u32 control;
#define CONTROL_IDLE BIT(31)
#define CONTROL_ENABLE BIT(30)
#define CONTROL_MAX_DIV (0xffff)
u32 alive;
u32 link;
u32 linkintraw;
u32 linkintmasked;
u32 __reserved_0[2];
u32 userintraw;
u32 userintmasked;
u32 userintmaskset;
u32 userintmaskclr;
u32 __reserved_1[20];
struct {
u32 access;
#define USERACCESS_GO BIT(31)
#define USERACCESS_WRITE BIT(30)
#define USERACCESS_ACK BIT(29)
#define USERACCESS_READ (0)
#define USERACCESS_DATA (0xffff)
u32 physel;
} user[0];
};
static const struct mdio_platform_data default_pdata = {
.bus_freq = DEF_OUT_FREQ,
};
struct davinci_mdio_data {
struct mdio_platform_data pdata;
struct davinci_mdio_regs __iomem *regs;
struct clk *clk;
struct device *dev;
struct mii_bus *bus;
bool active_in_suspend;
unsigned long access_time; /* jiffies */
/* Indicates that driver shouldn't modify phy_mask in case
* if MDIO bus is registered from DT.
*/
bool skip_scan;
u32 clk_div;
};
static void davinci_mdio_init_clk(struct davinci_mdio_data *data)
{
u32 mdio_in, div, mdio_out_khz, access_time;
mdio_in = clk_get_rate(data->clk);
div = (mdio_in / data->pdata.bus_freq) - 1;
if (div > CONTROL_MAX_DIV)
div = CONTROL_MAX_DIV;
data->clk_div = div;
/*
* One mdio transaction consists of:
* 32 bits of preamble
* 32 bits of transferred data
* 24 bits of bus yield (not needed unless shared?)
*/
mdio_out_khz = mdio_in / (1000 * (div + 1));
access_time = (88 * 1000) / mdio_out_khz;
/*
* In the worst case, we could be kicking off a user-access immediately
* after the mdio bus scan state-machine triggered its own read. If
* so, our request could get deferred by one access cycle. We
* defensively allow for 4 access cycles.
*/
data->access_time = usecs_to_jiffies(access_time * 4);
if (!data->access_time)
data->access_time = 1;
}
static void davinci_mdio_enable(struct davinci_mdio_data *data)
{
/* set enable and clock divider */
writel(data->clk_div | CONTROL_ENABLE, &data->regs->control);
}
static int davinci_mdio_reset(struct mii_bus *bus)
{
struct davinci_mdio_data *data = bus->priv;
u32 phy_mask, ver;
int ret;
ret = pm_runtime_get_sync(data->dev);
if (ret < 0) {
pm_runtime_put_noidle(data->dev);
return ret;
}
/* wait for scan logic to settle */
msleep(PHY_MAX_ADDR * data->access_time);
/* dump hardware version info */
ver = readl(&data->regs->version);
dev_info(data->dev,
"davinci mdio revision %d.%d, bus freq %ld\n",
(ver >> 8) & 0xff, ver & 0xff,
data->pdata.bus_freq);
if (data->skip_scan)
goto done;
/* get phy mask from the alive register */
phy_mask = readl(&data->regs->alive);
if (phy_mask) {
/* restrict mdio bus to live phys only */
dev_info(data->dev, "detected phy mask %x\n", ~phy_mask);
phy_mask = ~phy_mask;
} else {
/* desperately scan all phys */
dev_warn(data->dev, "no live phy, scanning all\n");
phy_mask = 0;
}
data->bus->phy_mask = phy_mask;
done:
pm_runtime_mark_last_busy(data->dev);
pm_runtime_put_autosuspend(data->dev);
return 0;
}
/* wait until hardware is ready for another user access */
static inline int wait_for_user_access(struct davinci_mdio_data *data)
{
struct davinci_mdio_regs __iomem *regs = data->regs;
unsigned long timeout = jiffies + msecs_to_jiffies(MDIO_TIMEOUT);
u32 reg;
while (time_after(timeout, jiffies)) {
reg = readl(&regs->user[0].access);
if ((reg & USERACCESS_GO) == 0)
return 0;
reg = readl(&regs->control);
if ((reg & CONTROL_IDLE) == 0) {
usleep_range(100, 200);
continue;
}
/*
* An emac soft_reset may have clobbered the mdio controller's
* state machine. We need to reset and retry the current
* operation
*/
dev_warn(data->dev, "resetting idled controller\n");
davinci_mdio_enable(data);
return -EAGAIN;
}
reg = readl(&regs->user[0].access);
if ((reg & USERACCESS_GO) == 0)
return 0;
dev_err(data->dev, "timed out waiting for user access\n");
return -ETIMEDOUT;
}
/* wait until hardware state machine is idle */
static inline int wait_for_idle(struct davinci_mdio_data *data)
{
struct davinci_mdio_regs __iomem *regs = data->regs;
u32 val, ret;
ret = readl_poll_timeout(&regs->control, val, val & CONTROL_IDLE,
0, MDIO_TIMEOUT * 1000);
if (ret)
dev_err(data->dev, "timed out waiting for idle\n");
return ret;
}
static int davinci_mdio_read(struct mii_bus *bus, int phy_id, int phy_reg)
{
struct davinci_mdio_data *data = bus->priv;
u32 reg;
int ret;
if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK)
return -EINVAL;
ret = pm_runtime_get_sync(data->dev);
if (ret < 0) {
pm_runtime_put_noidle(data->dev);
return ret;
}
reg = (USERACCESS_GO | USERACCESS_READ | (phy_reg << 21) |
(phy_id << 16));
while (1) {
ret = wait_for_user_access(data);
if (ret == -EAGAIN)
continue;
if (ret < 0)
break;
writel(reg, &data->regs->user[0].access);
ret = wait_for_user_access(data);
if (ret == -EAGAIN)
continue;
if (ret < 0)
break;
reg = readl(&data->regs->user[0].access);
ret = (reg & USERACCESS_ACK) ? (reg & USERACCESS_DATA) : -EIO;
break;
}
pm_runtime_mark_last_busy(data->dev);
pm_runtime_put_autosuspend(data->dev);
return ret;
}
static int davinci_mdio_write(struct mii_bus *bus, int phy_id,
int phy_reg, u16 phy_data)
{
struct davinci_mdio_data *data = bus->priv;
u32 reg;
int ret;
if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK)
return -EINVAL;
ret = pm_runtime_get_sync(data->dev);
if (ret < 0) {
pm_runtime_put_noidle(data->dev);
return ret;
}
reg = (USERACCESS_GO | USERACCESS_WRITE | (phy_reg << 21) |
(phy_id << 16) | (phy_data & USERACCESS_DATA));
while (1) {
ret = wait_for_user_access(data);
if (ret == -EAGAIN)
continue;
if (ret < 0)
break;
writel(reg, &data->regs->user[0].access);
ret = wait_for_user_access(data);
if (ret == -EAGAIN)
continue;
break;
}
pm_runtime_mark_last_busy(data->dev);
pm_runtime_put_autosuspend(data->dev);
return ret;
}
static int davinci_mdio_probe_dt(struct mdio_platform_data *data,
struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
u32 prop;
if (!node)
return -EINVAL;
if (of_property_read_u32(node, "bus_freq", &prop)) {
dev_err(&pdev->dev, "Missing bus_freq property in the DT.\n");
return -EINVAL;
}
data->bus_freq = prop;
return 0;
}
#if IS_ENABLED(CONFIG_OF)
static const struct davinci_mdio_of_param of_cpsw_mdio_data = {
.autosuspend_delay_ms = 100,
};
static const struct of_device_id davinci_mdio_of_mtable[] = {
{ .compatible = "ti,davinci_mdio", },
{ .compatible = "ti,cpsw-mdio", .data = &of_cpsw_mdio_data},
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, davinci_mdio_of_mtable);
#endif
static int davinci_mdio_probe(struct platform_device *pdev)
{
struct mdio_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct device *dev = &pdev->dev;
struct davinci_mdio_data *data;
struct resource *res;
struct phy_device *phy;
int ret, addr;
int autosuspend_delay_ms = -1;
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->bus = devm_mdiobus_alloc(dev);
if (!data->bus) {
dev_err(dev, "failed to alloc mii bus\n");
return -ENOMEM;
}
if (IS_ENABLED(CONFIG_OF) && dev->of_node) {
const struct davinci_mdio_of_param *of_mdio_data;
ret = davinci_mdio_probe_dt(&data->pdata, pdev);
if (ret)
return ret;
snprintf(data->bus->id, MII_BUS_ID_SIZE, "%s", pdev->name);
of_mdio_data = of_device_get_match_data(&pdev->dev);
if (of_mdio_data) {
autosuspend_delay_ms =
of_mdio_data->autosuspend_delay_ms;
}
} else {
data->pdata = pdata ? (*pdata) : default_pdata;
snprintf(data->bus->id, MII_BUS_ID_SIZE, "%s-%x",
pdev->name, pdev->id);
}
data->bus->name = dev_name(dev);
data->bus->read = davinci_mdio_read;
data->bus->write = davinci_mdio_write;
data->bus->reset = davinci_mdio_reset;
data->bus->parent = dev;
data->bus->priv = data;
data->clk = devm_clk_get(dev, "fck");
if (IS_ERR(data->clk)) {
dev_err(dev, "failed to get device clock\n");
return PTR_ERR(data->clk);
}
dev_set_drvdata(dev, data);
data->dev = dev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -EINVAL;
data->regs = devm_ioremap(dev, res->start, resource_size(res));
if (!data->regs)
return -ENOMEM;
davinci_mdio_init_clk(data);
pm_runtime_set_autosuspend_delay(&pdev->dev, autosuspend_delay_ms);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_enable(&pdev->dev);
/* register the mii bus
* Create PHYs from DT only in case if PHY child nodes are explicitly
* defined to support backward compatibility with DTs which assume that
* Davinci MDIO will always scan the bus for PHYs detection.
*/
if (dev->of_node && of_get_child_count(dev->of_node))
data->skip_scan = true;
ret = of_mdiobus_register(data->bus, dev->of_node);
if (ret)
goto bail_out;
/* scan and dump the bus */
for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
phy = mdiobus_get_phy(data->bus, addr);
if (phy) {
dev_info(dev, "phy[%d]: device %s, driver %s\n",
phy->mdio.addr, phydev_name(phy),
phy->drv ? phy->drv->name : "unknown");
}
}
return 0;
bail_out:
pm_runtime_dont_use_autosuspend(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return ret;
}
static int davinci_mdio_remove(struct platform_device *pdev)
{
struct davinci_mdio_data *data = platform_get_drvdata(pdev);
if (data->bus)
mdiobus_unregister(data->bus);
pm_runtime_dont_use_autosuspend(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return 0;
}
#ifdef CONFIG_PM
static int davinci_mdio_runtime_suspend(struct device *dev)
{
struct davinci_mdio_data *data = dev_get_drvdata(dev);
u32 ctrl;
/* shutdown the scan state machine */
ctrl = readl(&data->regs->control);
ctrl &= ~CONTROL_ENABLE;
writel(ctrl, &data->regs->control);
wait_for_idle(data);
return 0;
}
static int davinci_mdio_runtime_resume(struct device *dev)
{
struct davinci_mdio_data *data = dev_get_drvdata(dev);
davinci_mdio_enable(data);
return 0;
}
#endif
#ifdef CONFIG_PM_SLEEP
static int davinci_mdio_suspend(struct device *dev)
{
struct davinci_mdio_data *data = dev_get_drvdata(dev);
int ret = 0;
data->active_in_suspend = !pm_runtime_status_suspended(dev);
if (data->active_in_suspend)
ret = pm_runtime_force_suspend(dev);
if (ret < 0)
return ret;
/* Select sleep pin state */
pinctrl_pm_select_sleep_state(dev);
return 0;
}
static int davinci_mdio_resume(struct device *dev)
{
struct davinci_mdio_data *data = dev_get_drvdata(dev);
/* Select default pin state */
pinctrl_pm_select_default_state(dev);
if (data->active_in_suspend)
pm_runtime_force_resume(dev);
return 0;
}
#endif
static const struct dev_pm_ops davinci_mdio_pm_ops = {
SET_RUNTIME_PM_OPS(davinci_mdio_runtime_suspend,
davinci_mdio_runtime_resume, NULL)
SET_LATE_SYSTEM_SLEEP_PM_OPS(davinci_mdio_suspend, davinci_mdio_resume)
};
static struct platform_driver davinci_mdio_driver = {
.driver = {
.name = "davinci_mdio",
.pm = &davinci_mdio_pm_ops,
.of_match_table = of_match_ptr(davinci_mdio_of_mtable),
},
.probe = davinci_mdio_probe,
.remove = davinci_mdio_remove,
};
static int __init davinci_mdio_init(void)
{
return platform_driver_register(&davinci_mdio_driver);
}
device_initcall(davinci_mdio_init);
static void __exit davinci_mdio_exit(void)
{
platform_driver_unregister(&davinci_mdio_driver);
}
module_exit(davinci_mdio_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("DaVinci MDIO driver");