mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 10:04:12 +08:00
914b6f290b
Add driver to support Sharp LS06T1SX01 FullHD panel. The panel uses nt35695 driver IC. For example this LCD module can be found in the kwaek.ca Dragonboard Display Adapter Bundle. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211009203806.56821-3-dmitry.baryshkov@linaro.org
334 lines
7.5 KiB
C
334 lines
7.5 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/* Copyright (c) 2021 Linaro Ltd.
|
|
* Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
|
|
* Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include <video/mipi_display.h>
|
|
|
|
#include <drm/drm_mipi_dsi.h>
|
|
#include <drm/drm_modes.h>
|
|
#include <drm/drm_panel.h>
|
|
|
|
struct sharp_ls060 {
|
|
struct drm_panel panel;
|
|
struct mipi_dsi_device *dsi;
|
|
struct regulator *vddi_supply;
|
|
struct regulator *vddh_supply;
|
|
struct regulator *avdd_supply;
|
|
struct regulator *avee_supply;
|
|
struct gpio_desc *reset_gpio;
|
|
bool prepared;
|
|
};
|
|
|
|
static inline struct sharp_ls060 *to_sharp_ls060(struct drm_panel *panel)
|
|
{
|
|
return container_of(panel, struct sharp_ls060, panel);
|
|
}
|
|
|
|
#define dsi_dcs_write_seq(dsi, seq...) ({ \
|
|
static const u8 d[] = { seq }; \
|
|
\
|
|
mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \
|
|
})
|
|
|
|
static void sharp_ls060_reset(struct sharp_ls060 *ctx)
|
|
{
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
|
|
usleep_range(10000, 11000);
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
|
|
usleep_range(10000, 11000);
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
|
|
usleep_range(10000, 11000);
|
|
}
|
|
|
|
static int sharp_ls060_on(struct sharp_ls060 *ctx)
|
|
{
|
|
struct mipi_dsi_device *dsi = ctx->dsi;
|
|
struct device *dev = &dsi->dev;
|
|
int ret;
|
|
|
|
dsi->mode_flags |= MIPI_DSI_MODE_LPM;
|
|
|
|
ret = dsi_dcs_write_seq(dsi, 0xbb, 0x13);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to send command: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_MEMORY_START);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to send command: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
|
|
return ret;
|
|
}
|
|
msleep(120);
|
|
|
|
ret = mipi_dsi_dcs_set_display_on(dsi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to set display on: %d\n", ret);
|
|
return ret;
|
|
}
|
|
msleep(50);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sharp_ls060_off(struct sharp_ls060 *ctx)
|
|
{
|
|
struct mipi_dsi_device *dsi = ctx->dsi;
|
|
struct device *dev = &dsi->dev;
|
|
int ret;
|
|
|
|
dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
|
|
|
|
ret = mipi_dsi_dcs_set_display_off(dsi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to set display off: %d\n", ret);
|
|
return ret;
|
|
}
|
|
usleep_range(2000, 3000);
|
|
|
|
ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
|
|
return ret;
|
|
}
|
|
msleep(121);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sharp_ls060_prepare(struct drm_panel *panel)
|
|
{
|
|
struct sharp_ls060 *ctx = to_sharp_ls060(panel);
|
|
struct device *dev = &ctx->dsi->dev;
|
|
int ret;
|
|
|
|
if (ctx->prepared)
|
|
return 0;
|
|
|
|
ret = regulator_enable(ctx->vddi_supply);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = regulator_enable(ctx->avdd_supply);
|
|
if (ret < 0)
|
|
goto err_avdd;
|
|
|
|
usleep_range(1000, 2000);
|
|
|
|
ret = regulator_enable(ctx->avee_supply);
|
|
if (ret < 0)
|
|
goto err_avee;
|
|
|
|
usleep_range(10000, 11000);
|
|
|
|
ret = regulator_enable(ctx->vddh_supply);
|
|
if (ret < 0)
|
|
goto err_vddh;
|
|
|
|
usleep_range(10000, 11000);
|
|
|
|
sharp_ls060_reset(ctx);
|
|
|
|
ret = sharp_ls060_on(ctx);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to initialize panel: %d\n", ret);
|
|
goto err_on;
|
|
}
|
|
|
|
ctx->prepared = true;
|
|
|
|
return 0;
|
|
|
|
err_on:
|
|
regulator_disable(ctx->vddh_supply);
|
|
|
|
usleep_range(10000, 11000);
|
|
|
|
err_vddh:
|
|
regulator_disable(ctx->avee_supply);
|
|
|
|
err_avee:
|
|
regulator_disable(ctx->avdd_supply);
|
|
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
|
|
|
|
err_avdd:
|
|
regulator_disable(ctx->vddi_supply);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sharp_ls060_unprepare(struct drm_panel *panel)
|
|
{
|
|
struct sharp_ls060 *ctx = to_sharp_ls060(panel);
|
|
struct device *dev = &ctx->dsi->dev;
|
|
int ret;
|
|
|
|
if (!ctx->prepared)
|
|
return 0;
|
|
|
|
ret = sharp_ls060_off(ctx);
|
|
if (ret < 0)
|
|
dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
|
|
|
|
regulator_disable(ctx->vddh_supply);
|
|
|
|
usleep_range(10000, 11000);
|
|
|
|
regulator_disable(ctx->avee_supply);
|
|
regulator_disable(ctx->avdd_supply);
|
|
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
|
|
|
|
regulator_disable(ctx->vddi_supply);
|
|
|
|
ctx->prepared = false;
|
|
return 0;
|
|
}
|
|
|
|
static const struct drm_display_mode sharp_ls060_mode = {
|
|
.clock = (1080 + 96 + 16 + 64) * (1920 + 4 + 1 + 16) * 60 / 1000,
|
|
.hdisplay = 1080,
|
|
.hsync_start = 1080 + 96,
|
|
.hsync_end = 1080 + 96 + 16,
|
|
.htotal = 1080 + 96 + 16 + 64,
|
|
.vdisplay = 1920,
|
|
.vsync_start = 1920 + 4,
|
|
.vsync_end = 1920 + 4 + 1,
|
|
.vtotal = 1920 + 4 + 1 + 16,
|
|
.width_mm = 75,
|
|
.height_mm = 132,
|
|
};
|
|
|
|
static int sharp_ls060_get_modes(struct drm_panel *panel,
|
|
struct drm_connector *connector)
|
|
{
|
|
struct drm_display_mode *mode;
|
|
|
|
mode = drm_mode_duplicate(connector->dev, &sharp_ls060_mode);
|
|
if (!mode)
|
|
return -ENOMEM;
|
|
|
|
drm_mode_set_name(mode);
|
|
|
|
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
|
|
connector->display_info.width_mm = mode->width_mm;
|
|
connector->display_info.height_mm = mode->height_mm;
|
|
drm_mode_probed_add(connector, mode);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static const struct drm_panel_funcs sharp_ls060_panel_funcs = {
|
|
.prepare = sharp_ls060_prepare,
|
|
.unprepare = sharp_ls060_unprepare,
|
|
.get_modes = sharp_ls060_get_modes,
|
|
};
|
|
|
|
static int sharp_ls060_probe(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct device *dev = &dsi->dev;
|
|
struct sharp_ls060 *ctx;
|
|
int ret;
|
|
|
|
ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
|
|
if (!ctx)
|
|
return -ENOMEM;
|
|
|
|
ctx->vddi_supply = devm_regulator_get(dev, "vddi");
|
|
if (IS_ERR(ctx->vddi_supply))
|
|
return PTR_ERR(ctx->vddi_supply);
|
|
|
|
ctx->vddh_supply = devm_regulator_get(dev, "vddh");
|
|
if (IS_ERR(ctx->vddh_supply))
|
|
return PTR_ERR(ctx->vddh_supply);
|
|
|
|
ctx->avdd_supply = devm_regulator_get(dev, "avdd");
|
|
if (IS_ERR(ctx->avdd_supply))
|
|
return PTR_ERR(ctx->avdd_supply);
|
|
|
|
ctx->avee_supply = devm_regulator_get(dev, "avee");
|
|
if (IS_ERR(ctx->avee_supply))
|
|
return PTR_ERR(ctx->avee_supply);
|
|
|
|
ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(ctx->reset_gpio))
|
|
return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
|
|
"Failed to get reset-gpios\n");
|
|
|
|
ctx->dsi = dsi;
|
|
mipi_dsi_set_drvdata(dsi, ctx);
|
|
|
|
dsi->lanes = 4;
|
|
dsi->format = MIPI_DSI_FMT_RGB888;
|
|
dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
|
|
MIPI_DSI_MODE_NO_EOT_PACKET |
|
|
MIPI_DSI_CLOCK_NON_CONTINUOUS;
|
|
|
|
drm_panel_init(&ctx->panel, dev, &sharp_ls060_panel_funcs,
|
|
DRM_MODE_CONNECTOR_DSI);
|
|
|
|
ret = drm_panel_of_backlight(&ctx->panel);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "Failed to get backlight\n");
|
|
|
|
drm_panel_add(&ctx->panel);
|
|
|
|
ret = mipi_dsi_attach(dsi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
|
|
drm_panel_remove(&ctx->panel);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sharp_ls060_remove(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct sharp_ls060 *ctx = mipi_dsi_get_drvdata(dsi);
|
|
int ret;
|
|
|
|
ret = mipi_dsi_detach(dsi);
|
|
if (ret < 0)
|
|
dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
|
|
|
|
drm_panel_remove(&ctx->panel);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id sharp_ls060t1sx01_of_match[] = {
|
|
{ .compatible = "sharp,ls060t1sx01" },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sharp_ls060t1sx01_of_match);
|
|
|
|
static struct mipi_dsi_driver sharp_ls060_driver = {
|
|
.probe = sharp_ls060_probe,
|
|
.remove = sharp_ls060_remove,
|
|
.driver = {
|
|
.name = "panel-sharp-ls060t1sx01",
|
|
.of_match_table = sharp_ls060t1sx01_of_match,
|
|
},
|
|
};
|
|
module_mipi_dsi_driver(sharp_ls060_driver);
|
|
|
|
MODULE_AUTHOR("Dmitry Baryshkov <dmitry.baryshkov@linaro.org>");
|
|
MODULE_DESCRIPTION("DRM driver for Sharp LS060T1SX01 1080p video mode dsi panel");
|
|
MODULE_LICENSE("GPL v2");
|