linux/drivers/gpu/drm/panel/panel-samsung-sofef00.c
Cai Huoqing d60b93917a drm/panel: sofef00: Make use of the helper function dev_err_probe()
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104635.11675-1-caihuoqing@baidu.com
2021-10-14 22:11:07 +02:00

349 lines
8.4 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/* Copyright (c) 2020 Caleb Connolly <caleb@connolly.tech>
* Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
* Copyright (c) 2020, The Linux Foundation. All rights reserved.
*/
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/regulator/consumer.h>
#include <linux/swab.h>
#include <linux/backlight.h>
#include <video/mipi_display.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
struct sofef00_panel {
struct drm_panel panel;
struct mipi_dsi_device *dsi;
struct regulator *supply;
struct gpio_desc *reset_gpio;
const struct drm_display_mode *mode;
bool prepared;
};
static inline
struct sofef00_panel *to_sofef00_panel(struct drm_panel *panel)
{
return container_of(panel, struct sofef00_panel, panel);
}
#define dsi_dcs_write_seq(dsi, seq...) do { \
static const u8 d[] = { seq }; \
int ret; \
ret = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \
if (ret < 0) \
return ret; \
} while (0)
static void sofef00_panel_reset(struct sofef00_panel *ctx)
{
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
usleep_range(5000, 6000);
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
usleep_range(2000, 3000);
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
usleep_range(12000, 13000);
}
static int sofef00_panel_on(struct sofef00_panel *ctx)
{
struct mipi_dsi_device *dsi = ctx->dsi;
struct device *dev = &dsi->dev;
int ret;
dsi->mode_flags |= MIPI_DSI_MODE_LPM;
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
if (ret < 0) {
dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
return ret;
}
usleep_range(10000, 11000);
dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a);
ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
if (ret < 0) {
dev_err(dev, "Failed to set tear on: %d\n", ret);
return ret;
}
dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5);
dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a);
dsi_dcs_write_seq(dsi, 0xb0, 0x07);
dsi_dcs_write_seq(dsi, 0xb6, 0x12);
dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5);
dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20);
dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
ret = mipi_dsi_dcs_set_display_on(dsi);
if (ret < 0) {
dev_err(dev, "Failed to set display on: %d\n", ret);
return ret;
}
return 0;
}
static int sofef00_panel_off(struct sofef00_panel *ctx)
{
struct mipi_dsi_device *dsi = ctx->dsi;
struct device *dev = &dsi->dev;
int ret;
dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
ret = mipi_dsi_dcs_set_display_off(dsi);
if (ret < 0) {
dev_err(dev, "Failed to set display off: %d\n", ret);
return ret;
}
msleep(40);
ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
if (ret < 0) {
dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
return ret;
}
msleep(160);
return 0;
}
static int sofef00_panel_prepare(struct drm_panel *panel)
{
struct sofef00_panel *ctx = to_sofef00_panel(panel);
struct device *dev = &ctx->dsi->dev;
int ret;
if (ctx->prepared)
return 0;
ret = regulator_enable(ctx->supply);
if (ret < 0) {
dev_err(dev, "Failed to enable regulator: %d\n", ret);
return ret;
}
sofef00_panel_reset(ctx);
ret = sofef00_panel_on(ctx);
if (ret < 0) {
dev_err(dev, "Failed to initialize panel: %d\n", ret);
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
return ret;
}
ctx->prepared = true;
return 0;
}
static int sofef00_panel_unprepare(struct drm_panel *panel)
{
struct sofef00_panel *ctx = to_sofef00_panel(panel);
struct device *dev = &ctx->dsi->dev;
int ret;
if (!ctx->prepared)
return 0;
ret = sofef00_panel_off(ctx);
if (ret < 0)
dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
regulator_disable(ctx->supply);
ctx->prepared = false;
return 0;
}
static const struct drm_display_mode enchilada_panel_mode = {
.clock = (1080 + 112 + 16 + 36) * (2280 + 36 + 8 + 12) * 60 / 1000,
.hdisplay = 1080,
.hsync_start = 1080 + 112,
.hsync_end = 1080 + 112 + 16,
.htotal = 1080 + 112 + 16 + 36,
.vdisplay = 2280,
.vsync_start = 2280 + 36,
.vsync_end = 2280 + 36 + 8,
.vtotal = 2280 + 36 + 8 + 12,
.width_mm = 68,
.height_mm = 145,
};
static const struct drm_display_mode fajita_panel_mode = {
.clock = (1080 + 72 + 16 + 36) * (2340 + 32 + 4 + 18) * 60 / 1000,
.hdisplay = 1080,
.hsync_start = 1080 + 72,
.hsync_end = 1080 + 72 + 16,
.htotal = 1080 + 72 + 16 + 36,
.vdisplay = 2340,
.vsync_start = 2340 + 32,
.vsync_end = 2340 + 32 + 4,
.vtotal = 2340 + 32 + 4 + 18,
.width_mm = 68,
.height_mm = 145,
};
static int sofef00_panel_get_modes(struct drm_panel *panel, struct drm_connector *connector)
{
struct drm_display_mode *mode;
struct sofef00_panel *ctx = to_sofef00_panel(panel);
mode = drm_mode_duplicate(connector->dev, ctx->mode);
if (!mode)
return -ENOMEM;
drm_mode_set_name(mode);
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
connector->display_info.width_mm = mode->width_mm;
connector->display_info.height_mm = mode->height_mm;
drm_mode_probed_add(connector, mode);
return 1;
}
static const struct drm_panel_funcs sofef00_panel_panel_funcs = {
.prepare = sofef00_panel_prepare,
.unprepare = sofef00_panel_unprepare,
.get_modes = sofef00_panel_get_modes,
};
static int sofef00_panel_bl_update_status(struct backlight_device *bl)
{
struct mipi_dsi_device *dsi = bl_get_data(bl);
int err;
u16 brightness;
brightness = (u16)backlight_get_brightness(bl);
// This panel needs the high and low bytes swapped for the brightness value
brightness = __swab16(brightness);
err = mipi_dsi_dcs_set_display_brightness(dsi, brightness);
if (err < 0)
return err;
return 0;
}
static const struct backlight_ops sofef00_panel_bl_ops = {
.update_status = sofef00_panel_bl_update_status,
};
static struct backlight_device *
sofef00_create_backlight(struct mipi_dsi_device *dsi)
{
struct device *dev = &dsi->dev;
const struct backlight_properties props = {
.type = BACKLIGHT_PLATFORM,
.brightness = 1023,
.max_brightness = 1023,
};
return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
&sofef00_panel_bl_ops, &props);
}
static int sofef00_panel_probe(struct mipi_dsi_device *dsi)
{
struct device *dev = &dsi->dev;
struct sofef00_panel *ctx;
int ret;
ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
ctx->mode = of_device_get_match_data(dev);
if (!ctx->mode) {
dev_err(dev, "Missing device mode\n");
return -ENODEV;
}
ctx->supply = devm_regulator_get(dev, "vddio");
if (IS_ERR(ctx->supply))
return dev_err_probe(dev, PTR_ERR(ctx->supply),
"Failed to get vddio regulator\n");
ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(ctx->reset_gpio))
return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
"Failed to get reset-gpios\n");
ctx->dsi = dsi;
mipi_dsi_set_drvdata(dsi, ctx);
dsi->lanes = 4;
dsi->format = MIPI_DSI_FMT_RGB888;
drm_panel_init(&ctx->panel, dev, &sofef00_panel_panel_funcs,
DRM_MODE_CONNECTOR_DSI);
ctx->panel.backlight = sofef00_create_backlight(dsi);
if (IS_ERR(ctx->panel.backlight))
return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight),
"Failed to create backlight\n");
drm_panel_add(&ctx->panel);
ret = mipi_dsi_attach(dsi);
if (ret < 0) {
dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
drm_panel_remove(&ctx->panel);
return ret;
}
return 0;
}
static int sofef00_panel_remove(struct mipi_dsi_device *dsi)
{
struct sofef00_panel *ctx = mipi_dsi_get_drvdata(dsi);
int ret;
ret = mipi_dsi_detach(dsi);
if (ret < 0)
dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
drm_panel_remove(&ctx->panel);
return 0;
}
static const struct of_device_id sofef00_panel_of_match[] = {
{ // OnePlus 6 / enchilada
.compatible = "samsung,sofef00",
.data = &enchilada_panel_mode,
},
{ // OnePlus 6T / fajita
.compatible = "samsung,s6e3fc2x01",
.data = &fajita_panel_mode,
},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, sofef00_panel_of_match);
static struct mipi_dsi_driver sofef00_panel_driver = {
.probe = sofef00_panel_probe,
.remove = sofef00_panel_remove,
.driver = {
.name = "panel-oneplus6",
.of_match_table = sofef00_panel_of_match,
},
};
module_mipi_dsi_driver(sofef00_panel_driver);
MODULE_AUTHOR("Caleb Connolly <caleb@connolly.tech>");
MODULE_DESCRIPTION("DRM driver for Samsung AMOLED DSI panels found in OnePlus 6/6T phones");
MODULE_LICENSE("GPL v2");