linux/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
Yakir Yang d698f0eb9d drm/rockchip: analogix_dp: update the comments about why need to hardcode VOP output mode
The hardware IC designed that VOP must output the RGB10 video format to
eDP contoller, and if eDP panel only support RGB8, then eDP contoller
should cut down the video data, not via VOP contoller, that's why we need
to hardcode the VOP output mode to RGA10 here.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Acked-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Tomasz Figa <tomasz.figa@chromium.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
2016-07-05 21:53:39 +08:00

441 lines
11 KiB
C

/*
* Rockchip SoC DP (Display Port) interface driver.
*
* Copyright (C) Fuzhou Rockchip Electronics Co., Ltd.
* Author: Andy Yan <andy.yan@rock-chips.com>
* Yakir Yang <ykk@rock-chips.com>
* Jeff Chen <jeff.chen@rock-chips.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/component.h>
#include <linux/mfd/syscon.h>
#include <linux/of_device.h>
#include <linux/of_graph.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/clk.h>
#include <drm/drmP.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_dp_helper.h>
#include <drm/drm_of.h>
#include <drm/drm_panel.h>
#include <video/of_videomode.h>
#include <video/videomode.h>
#include <drm/bridge/analogix_dp.h>
#include "rockchip_drm_drv.h"
#include "rockchip_drm_vop.h"
#define RK3288_GRF_SOC_CON6 0x25c
#define RK3288_EDP_LCDC_SEL BIT(5)
#define RK3399_GRF_SOC_CON20 0x6250
#define RK3399_EDP_LCDC_SEL BIT(5)
#define HIWORD_UPDATE(val, mask) (val | (mask) << 16)
#define to_dp(nm) container_of(nm, struct rockchip_dp_device, nm)
/**
* struct rockchip_dp_chip_data - splite the grf setting of kind of chips
* @lcdsel_grf_reg: grf register offset of lcdc select
* @lcdsel_big: reg value of selecting vop big for eDP
* @lcdsel_lit: reg value of selecting vop little for eDP
* @chip_type: specific chip type
*/
struct rockchip_dp_chip_data {
u32 lcdsel_grf_reg;
u32 lcdsel_big;
u32 lcdsel_lit;
u32 chip_type;
};
struct rockchip_dp_device {
struct drm_device *drm_dev;
struct device *dev;
struct drm_encoder encoder;
struct drm_display_mode mode;
struct clk *pclk;
struct regmap *grf;
struct reset_control *rst;
const struct rockchip_dp_chip_data *data;
struct analogix_dp_plat_data plat_data;
};
static int rockchip_dp_pre_init(struct rockchip_dp_device *dp)
{
reset_control_assert(dp->rst);
usleep_range(10, 20);
reset_control_deassert(dp->rst);
return 0;
}
static int rockchip_dp_poweron(struct analogix_dp_plat_data *plat_data)
{
struct rockchip_dp_device *dp = to_dp(plat_data);
int ret;
ret = clk_prepare_enable(dp->pclk);
if (ret < 0) {
dev_err(dp->dev, "failed to enable pclk %d\n", ret);
return ret;
}
ret = rockchip_dp_pre_init(dp);
if (ret < 0) {
dev_err(dp->dev, "failed to dp pre init %d\n", ret);
return ret;
}
return 0;
}
static int rockchip_dp_powerdown(struct analogix_dp_plat_data *plat_data)
{
struct rockchip_dp_device *dp = to_dp(plat_data);
clk_disable_unprepare(dp->pclk);
return 0;
}
static int rockchip_dp_get_modes(struct analogix_dp_plat_data *plat_data,
struct drm_connector *connector)
{
struct drm_display_info *di = &connector->display_info;
/* VOP couldn't output YUV video format for eDP rightly */
u32 mask = DRM_COLOR_FORMAT_YCRCB444 | DRM_COLOR_FORMAT_YCRCB422;
if ((di->color_formats & mask)) {
DRM_DEBUG_KMS("Swapping display color format from YUV to RGB\n");
di->color_formats &= ~mask;
di->color_formats |= DRM_COLOR_FORMAT_RGB444;
di->bpc = 8;
}
return 0;
}
static bool
rockchip_dp_drm_encoder_mode_fixup(struct drm_encoder *encoder,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
/* do nothing */
return true;
}
static void rockchip_dp_drm_encoder_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted)
{
/* do nothing */
}
static void rockchip_dp_drm_encoder_enable(struct drm_encoder *encoder)
{
struct rockchip_dp_device *dp = to_dp(encoder);
int ret;
u32 val;
ret = drm_of_encoder_active_endpoint_id(dp->dev->of_node, encoder);
if (ret < 0)
return;
if (ret)
val = dp->data->lcdsel_lit;
else
val = dp->data->lcdsel_big;
dev_dbg(dp->dev, "vop %s output to dp\n", (ret) ? "LIT" : "BIG");
ret = regmap_write(dp->grf, dp->data->lcdsel_grf_reg, val);
if (ret != 0) {
dev_err(dp->dev, "Could not write to GRF: %d\n", ret);
return;
}
}
static void rockchip_dp_drm_encoder_nop(struct drm_encoder *encoder)
{
/* do nothing */
}
static int
rockchip_dp_drm_encoder_atomic_check(struct drm_encoder *encoder,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
{
struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state);
struct rockchip_dp_device *dp = to_dp(encoder);
int ret;
/*
* The hardware IC designed that VOP must output the RGB10 video
* format to eDP controller, and if eDP panel only support RGB8,
* then eDP controller should cut down the video data, not via VOP
* controller, that's why we need to hardcode the VOP output mode
* to RGA10 here.
*/
s->output_mode = ROCKCHIP_OUT_MODE_AAAA;
s->output_type = DRM_MODE_CONNECTOR_eDP;
if (dp->data->chip_type == RK3399_EDP) {
/*
* For RK3399, VOP Lit must code the out mode to RGB888,
* VOP Big must code the out mode to RGB10.
*/
ret = drm_of_encoder_active_endpoint_id(dp->dev->of_node,
encoder);
if (ret > 0)
s->output_mode = ROCKCHIP_OUT_MODE_P888;
}
return 0;
}
static struct drm_encoder_helper_funcs rockchip_dp_encoder_helper_funcs = {
.mode_fixup = rockchip_dp_drm_encoder_mode_fixup,
.mode_set = rockchip_dp_drm_encoder_mode_set,
.enable = rockchip_dp_drm_encoder_enable,
.disable = rockchip_dp_drm_encoder_nop,
.atomic_check = rockchip_dp_drm_encoder_atomic_check,
};
static void rockchip_dp_drm_encoder_destroy(struct drm_encoder *encoder)
{
drm_encoder_cleanup(encoder);
}
static struct drm_encoder_funcs rockchip_dp_encoder_funcs = {
.destroy = rockchip_dp_drm_encoder_destroy,
};
static int rockchip_dp_init(struct rockchip_dp_device *dp)
{
struct device *dev = dp->dev;
struct device_node *np = dev->of_node;
int ret;
dp->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
if (IS_ERR(dp->grf)) {
dev_err(dev, "failed to get rockchip,grf property\n");
return PTR_ERR(dp->grf);
}
dp->pclk = devm_clk_get(dev, "pclk");
if (IS_ERR(dp->pclk)) {
dev_err(dev, "failed to get pclk property\n");
return PTR_ERR(dp->pclk);
}
dp->rst = devm_reset_control_get(dev, "dp");
if (IS_ERR(dp->rst)) {
dev_err(dev, "failed to get dp reset control\n");
return PTR_ERR(dp->rst);
}
ret = clk_prepare_enable(dp->pclk);
if (ret < 0) {
dev_err(dp->dev, "failed to enable pclk %d\n", ret);
return ret;
}
ret = rockchip_dp_pre_init(dp);
if (ret < 0) {
dev_err(dp->dev, "failed to pre init %d\n", ret);
return ret;
}
return 0;
}
static int rockchip_dp_drm_create_encoder(struct rockchip_dp_device *dp)
{
struct drm_encoder *encoder = &dp->encoder;
struct drm_device *drm_dev = dp->drm_dev;
struct device *dev = dp->dev;
int ret;
encoder->possible_crtcs = drm_of_find_possible_crtcs(drm_dev,
dev->of_node);
DRM_DEBUG_KMS("possible_crtcs = 0x%x\n", encoder->possible_crtcs);
ret = drm_encoder_init(drm_dev, encoder, &rockchip_dp_encoder_funcs,
DRM_MODE_ENCODER_TMDS, NULL);
if (ret) {
DRM_ERROR("failed to initialize encoder with drm\n");
return ret;
}
drm_encoder_helper_add(encoder, &rockchip_dp_encoder_helper_funcs);
return 0;
}
static int rockchip_dp_bind(struct device *dev, struct device *master,
void *data)
{
struct rockchip_dp_device *dp = dev_get_drvdata(dev);
const struct rockchip_dp_chip_data *dp_data;
struct drm_device *drm_dev = data;
int ret;
/*
* Just like the probe function said, we don't need the
* device drvrate anymore, we should leave the charge to
* analogix dp driver, set the device drvdata to NULL.
*/
dev_set_drvdata(dev, NULL);
dp_data = of_device_get_match_data(dev);
if (!dp_data)
return -ENODEV;
ret = rockchip_dp_init(dp);
if (ret < 0)
return ret;
dp->data = dp_data;
dp->drm_dev = drm_dev;
ret = rockchip_dp_drm_create_encoder(dp);
if (ret) {
DRM_ERROR("failed to create drm encoder\n");
return ret;
}
dp->plat_data.encoder = &dp->encoder;
dp->plat_data.dev_type = dp->data->chip_type;
dp->plat_data.power_on = rockchip_dp_poweron;
dp->plat_data.power_off = rockchip_dp_powerdown;
dp->plat_data.get_modes = rockchip_dp_get_modes;
return analogix_dp_bind(dev, dp->drm_dev, &dp->plat_data);
}
static void rockchip_dp_unbind(struct device *dev, struct device *master,
void *data)
{
return analogix_dp_unbind(dev, master, data);
}
static const struct component_ops rockchip_dp_component_ops = {
.bind = rockchip_dp_bind,
.unbind = rockchip_dp_unbind,
};
static int rockchip_dp_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *panel_node, *port, *endpoint;
struct drm_panel *panel = NULL;
struct rockchip_dp_device *dp;
port = of_graph_get_port_by_id(dev->of_node, 1);
if (port) {
endpoint = of_get_child_by_name(port, "endpoint");
of_node_put(port);
if (!endpoint) {
dev_err(dev, "no output endpoint found\n");
return -EINVAL;
}
panel_node = of_graph_get_remote_port_parent(endpoint);
of_node_put(endpoint);
if (!panel_node) {
dev_err(dev, "no output node found\n");
return -EINVAL;
}
panel = of_drm_find_panel(panel_node);
of_node_put(panel_node);
if (!panel) {
DRM_ERROR("failed to find panel\n");
return -EPROBE_DEFER;
}
}
dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL);
if (!dp)
return -ENOMEM;
dp->dev = dev;
dp->plat_data.panel = panel;
/*
* We just use the drvdata until driver run into component
* add function, and then we would set drvdata to null, so
* that analogix dp driver could take charge of the drvdata.
*/
platform_set_drvdata(pdev, dp);
return component_add(dev, &rockchip_dp_component_ops);
}
static int rockchip_dp_remove(struct platform_device *pdev)
{
component_del(&pdev->dev, &rockchip_dp_component_ops);
return 0;
}
static const struct dev_pm_ops rockchip_dp_pm_ops = {
#ifdef CONFIG_PM_SLEEP
.suspend = analogix_dp_suspend,
.resume_early = analogix_dp_resume,
#endif
};
static const struct rockchip_dp_chip_data rk3399_edp = {
.lcdsel_grf_reg = RK3399_GRF_SOC_CON20,
.lcdsel_big = HIWORD_UPDATE(0, RK3399_EDP_LCDC_SEL),
.lcdsel_lit = HIWORD_UPDATE(RK3399_EDP_LCDC_SEL, RK3399_EDP_LCDC_SEL),
.chip_type = RK3399_EDP,
};
static const struct rockchip_dp_chip_data rk3288_dp = {
.lcdsel_grf_reg = RK3288_GRF_SOC_CON6,
.lcdsel_big = HIWORD_UPDATE(0, RK3288_EDP_LCDC_SEL),
.lcdsel_lit = HIWORD_UPDATE(RK3288_EDP_LCDC_SEL, RK3288_EDP_LCDC_SEL),
.chip_type = RK3288_DP,
};
static const struct of_device_id rockchip_dp_dt_ids[] = {
{.compatible = "rockchip,rk3288-dp", .data = &rk3288_dp },
{.compatible = "rockchip,rk3399-edp", .data = &rk3399_edp },
{}
};
MODULE_DEVICE_TABLE(of, rockchip_dp_dt_ids);
static struct platform_driver rockchip_dp_driver = {
.probe = rockchip_dp_probe,
.remove = rockchip_dp_remove,
.driver = {
.name = "rockchip-dp",
.owner = THIS_MODULE,
.pm = &rockchip_dp_pm_ops,
.of_match_table = of_match_ptr(rockchip_dp_dt_ids),
},
};
module_platform_driver(rockchip_dp_driver);
MODULE_AUTHOR("Yakir Yang <ykk@rock-chips.com>");
MODULE_AUTHOR("Jeff chen <jeff.chen@rock-chips.com>");
MODULE_DESCRIPTION("Rockchip Specific Analogix-DP Driver Extension");
MODULE_LICENSE("GPL v2");