mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-27 14:14:24 +08:00
24d95bb046
Make similar OF and ID table to extend support for ID match using i2c_match_data(). Currently it works only for OF match tables as the driver_data is wrong for ID match. While at it, drop trailing comma in the terminator entry from ID table. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230828165447.106058-1-biju.das.jz@bp.renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
235 lines
5.8 KiB
C
235 lines
5.8 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
//
|
|
// SY8824C/SY8824E regulator driver
|
|
//
|
|
// Copyright (C) 2019 Synaptics Incorporated
|
|
//
|
|
// Author: Jisheng Zhang <jszhang@kernel.org>
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/of.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
|
|
#define SY8824C_BUCK_EN (1 << 7)
|
|
#define SY8824C_MODE (1 << 6)
|
|
|
|
struct sy8824_config {
|
|
/* registers */
|
|
unsigned int vol_reg;
|
|
unsigned int mode_reg;
|
|
unsigned int enable_reg;
|
|
/* Voltage range and step(linear) */
|
|
unsigned int vsel_min;
|
|
unsigned int vsel_step;
|
|
unsigned int vsel_count;
|
|
const struct regmap_config *config;
|
|
};
|
|
|
|
struct sy8824_device_info {
|
|
struct device *dev;
|
|
struct regulator_desc desc;
|
|
struct regulator_init_data *regulator;
|
|
const struct sy8824_config *cfg;
|
|
};
|
|
|
|
static int sy8824_set_mode(struct regulator_dev *rdev, unsigned int mode)
|
|
{
|
|
struct sy8824_device_info *di = rdev_get_drvdata(rdev);
|
|
const struct sy8824_config *cfg = di->cfg;
|
|
|
|
switch (mode) {
|
|
case REGULATOR_MODE_FAST:
|
|
regmap_update_bits(rdev->regmap, cfg->mode_reg,
|
|
SY8824C_MODE, SY8824C_MODE);
|
|
break;
|
|
case REGULATOR_MODE_NORMAL:
|
|
regmap_update_bits(rdev->regmap, cfg->mode_reg,
|
|
SY8824C_MODE, 0);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int sy8824_get_mode(struct regulator_dev *rdev)
|
|
{
|
|
struct sy8824_device_info *di = rdev_get_drvdata(rdev);
|
|
const struct sy8824_config *cfg = di->cfg;
|
|
u32 val;
|
|
int ret = 0;
|
|
|
|
ret = regmap_read(rdev->regmap, cfg->mode_reg, &val);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (val & SY8824C_MODE)
|
|
return REGULATOR_MODE_FAST;
|
|
else
|
|
return REGULATOR_MODE_NORMAL;
|
|
}
|
|
|
|
static const struct regulator_ops sy8824_regulator_ops = {
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.set_mode = sy8824_set_mode,
|
|
.get_mode = sy8824_get_mode,
|
|
};
|
|
|
|
static int sy8824_regulator_register(struct sy8824_device_info *di,
|
|
struct regulator_config *config)
|
|
{
|
|
struct regulator_desc *rdesc = &di->desc;
|
|
const struct sy8824_config *cfg = di->cfg;
|
|
struct regulator_dev *rdev;
|
|
|
|
rdesc->name = "sy8824-reg";
|
|
rdesc->supply_name = "vin";
|
|
rdesc->ops = &sy8824_regulator_ops;
|
|
rdesc->type = REGULATOR_VOLTAGE;
|
|
rdesc->n_voltages = cfg->vsel_count;
|
|
rdesc->enable_reg = cfg->enable_reg;
|
|
rdesc->enable_mask = SY8824C_BUCK_EN;
|
|
rdesc->min_uV = cfg->vsel_min;
|
|
rdesc->uV_step = cfg->vsel_step;
|
|
rdesc->vsel_reg = cfg->vol_reg;
|
|
rdesc->vsel_mask = cfg->vsel_count - 1;
|
|
rdesc->owner = THIS_MODULE;
|
|
|
|
rdev = devm_regulator_register(di->dev, &di->desc, config);
|
|
return PTR_ERR_OR_ZERO(rdev);
|
|
}
|
|
|
|
static const struct regmap_config sy8824_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.num_reg_defaults_raw = 1,
|
|
.cache_type = REGCACHE_FLAT,
|
|
};
|
|
|
|
static const struct regmap_config sy20276_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.num_reg_defaults_raw = 2,
|
|
.cache_type = REGCACHE_FLAT,
|
|
};
|
|
|
|
static int sy8824_i2c_probe(struct i2c_client *client)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct device_node *np = dev->of_node;
|
|
struct sy8824_device_info *di;
|
|
struct regulator_config config = { };
|
|
struct regmap *regmap;
|
|
int ret;
|
|
|
|
di = devm_kzalloc(dev, sizeof(struct sy8824_device_info), GFP_KERNEL);
|
|
if (!di)
|
|
return -ENOMEM;
|
|
|
|
di->regulator = of_get_regulator_init_data(dev, np, &di->desc);
|
|
if (!di->regulator) {
|
|
dev_err(dev, "Platform data not found!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
di->dev = dev;
|
|
di->cfg = i2c_get_match_data(client);
|
|
|
|
regmap = devm_regmap_init_i2c(client, di->cfg->config);
|
|
if (IS_ERR(regmap)) {
|
|
dev_err(dev, "Failed to allocate regmap!\n");
|
|
return PTR_ERR(regmap);
|
|
}
|
|
i2c_set_clientdata(client, di);
|
|
|
|
config.dev = di->dev;
|
|
config.init_data = di->regulator;
|
|
config.regmap = regmap;
|
|
config.driver_data = di;
|
|
config.of_node = np;
|
|
|
|
ret = sy8824_regulator_register(di, &config);
|
|
if (ret < 0)
|
|
dev_err(dev, "Failed to register regulator!\n");
|
|
return ret;
|
|
}
|
|
|
|
static const struct sy8824_config sy8824c_cfg = {
|
|
.vol_reg = 0x00,
|
|
.mode_reg = 0x00,
|
|
.enable_reg = 0x00,
|
|
.vsel_min = 762500,
|
|
.vsel_step = 12500,
|
|
.vsel_count = 64,
|
|
.config = &sy8824_regmap_config,
|
|
};
|
|
|
|
static const struct sy8824_config sy8824e_cfg = {
|
|
.vol_reg = 0x00,
|
|
.mode_reg = 0x00,
|
|
.enable_reg = 0x00,
|
|
.vsel_min = 700000,
|
|
.vsel_step = 12500,
|
|
.vsel_count = 64,
|
|
.config = &sy8824_regmap_config,
|
|
};
|
|
|
|
static const struct sy8824_config sy20276_cfg = {
|
|
.vol_reg = 0x00,
|
|
.mode_reg = 0x01,
|
|
.enable_reg = 0x01,
|
|
.vsel_min = 600000,
|
|
.vsel_step = 10000,
|
|
.vsel_count = 128,
|
|
.config = &sy20276_regmap_config,
|
|
};
|
|
|
|
static const struct sy8824_config sy20278_cfg = {
|
|
.vol_reg = 0x00,
|
|
.mode_reg = 0x01,
|
|
.enable_reg = 0x01,
|
|
.vsel_min = 762500,
|
|
.vsel_step = 12500,
|
|
.vsel_count = 64,
|
|
.config = &sy20276_regmap_config,
|
|
};
|
|
|
|
static const struct of_device_id sy8824_dt_ids[] = {
|
|
{ .compatible = "silergy,sy8824c", .data = &sy8824c_cfg },
|
|
{ .compatible = "silergy,sy8824e", .data = &sy8824e_cfg },
|
|
{ .compatible = "silergy,sy20276", .data = &sy20276_cfg },
|
|
{ .compatible = "silergy,sy20278", .data = &sy20278_cfg },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sy8824_dt_ids);
|
|
|
|
static const struct i2c_device_id sy8824_id[] = {
|
|
{ "sy8824", (kernel_ulong_t)&sy8824c_cfg },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, sy8824_id);
|
|
|
|
static struct i2c_driver sy8824_regulator_driver = {
|
|
.driver = {
|
|
.name = "sy8824-regulator",
|
|
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
|
|
.of_match_table = sy8824_dt_ids,
|
|
},
|
|
.probe = sy8824_i2c_probe,
|
|
.id_table = sy8824_id,
|
|
};
|
|
module_i2c_driver(sy8824_regulator_driver);
|
|
|
|
MODULE_AUTHOR("Jisheng Zhang <jszhang@kernel.org>");
|
|
MODULE_DESCRIPTION("SY8824C/SY8824E regulator driver");
|
|
MODULE_LICENSE("GPL v2");
|