korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-14 15:54:15 +08:00
Code Issues Packages Projects Releases Wiki Activity
d586c86d50
linux/crypto/Kconfig
chandramouli narayanan 7c1da8d0d0 crypto: sha - SHA1 transform x86_64 AVX2 
This git patch adds x86_64 AVX2 optimization of SHA1
transform to crypto support. The patch has been tested with 3.14.0-rc1
kernel.

On a Haswell desktop, with turbo disabled and all cpus running
at maximum frequency, tcrypt shows AVX2 performance improvement
from 3% for 256 bytes update to 16% for 1024 bytes update over
AVX implementation.

This patch adds sha1_avx2_transform(), the glue, build and
configuration changes needed for AVX2 optimization of
SHA1 transform to crypto support.

sha1-ssse3 is one module which adds the necessary optimization
support (SSSE3/AVX/AVX2) for the low-level SHA1 transform function.
With better optimization support, transform function is overridden
as the case may be. In the case of AVX2, due to performance reasons
across datablock sizes, the AVX or AVX2 transform function is used
at run-time as it suits best. The Makefile change therefore appends
the necessary objects to the linkage. Due to this, the patch merely
appends AVX2 transform to the existing build mix and Kconfig support
and leaves the configuration build support as is.

Signed-off-by: Chandramouli Narayanan <mouli@linux.intel.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 21:54:30 +08:00

1411 lines
40 KiB
Plaintext
Raw Blame History

#
# Generic algorithms support
#
config XOR_BLOCKS
tristate
#
# async_tx api: hardware offloaded memory transfer/transform support
#
source "crypto/async_tx/Kconfig"
#
# Cryptographic API Configuration
#
menuconfig CRYPTO
tristate "Cryptographic API"
help
This option provides the core Cryptographic API.
if CRYPTO
comment "Crypto core or helper"
config CRYPTO_FIPS
bool "FIPS 200 compliance"
depends on CRYPTO_ANSI_CPRNG && !CRYPTO_MANAGER_DISABLE_TESTS
help
This options enables the fips boot option which is
required if you want to system to operate in a FIPS 200
certification. You should say no unless you know what
this is.
config CRYPTO_ALGAPI
tristate
select CRYPTO_ALGAPI2
help
This option provides the API for cryptographic algorithms.
config CRYPTO_ALGAPI2
tristate
config CRYPTO_AEAD
tristate
select CRYPTO_AEAD2
select CRYPTO_ALGAPI
config CRYPTO_AEAD2
tristate
select CRYPTO_ALGAPI2
config CRYPTO_BLKCIPHER
tristate
select CRYPTO_BLKCIPHER2
select CRYPTO_ALGAPI
config CRYPTO_BLKCIPHER2
tristate
select CRYPTO_ALGAPI2
select CRYPTO_RNG2
select CRYPTO_WORKQUEUE
config CRYPTO_HASH
tristate
select CRYPTO_HASH2
select CRYPTO_ALGAPI
config CRYPTO_HASH2
tristate
select CRYPTO_ALGAPI2
config CRYPTO_RNG
tristate
select CRYPTO_RNG2
select CRYPTO_ALGAPI
config CRYPTO_RNG2
tristate
select CRYPTO_ALGAPI2
config CRYPTO_PCOMP
tristate
select CRYPTO_PCOMP2
select CRYPTO_ALGAPI
config CRYPTO_PCOMP2
tristate
select CRYPTO_ALGAPI2
config CRYPTO_MANAGER
tristate "Cryptographic algorithm manager"
select CRYPTO_MANAGER2
help
Create default cryptographic template instantiations such as
cbc(aes).
config CRYPTO_MANAGER2
def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y)
select CRYPTO_AEAD2
select CRYPTO_HASH2
select CRYPTO_BLKCIPHER2
select CRYPTO_PCOMP2
config CRYPTO_USER
tristate "Userspace cryptographic algorithm configuration"
depends on NET
select CRYPTO_MANAGER
help
Userspace configuration for cryptographic instantiations such as
cbc(aes).
config CRYPTO_MANAGER_DISABLE_TESTS
bool "Disable run-time self tests"
default y
depends on CRYPTO_MANAGER2
help
Disable run-time self tests that normally take place at
algorithm registration.
config CRYPTO_GF128MUL
tristate "GF(2^128) multiplication functions"
help
Efficient table driven implementation of multiplications in the
field GF(2^128). This is needed by some cypher modes. This
option will be selected automatically if you select such a
cipher mode. Only select this option by hand if you expect to load
an external module that requires these functions.
config CRYPTO_NULL
tristate "Null algorithms"
select CRYPTO_ALGAPI
select CRYPTO_BLKCIPHER
select CRYPTO_HASH
help
These are 'Null' algorithms, used by IPsec, which do nothing.
config CRYPTO_PCRYPT
tristate "Parallel crypto engine"
depends on SMP
select PADATA
select CRYPTO_MANAGER
select CRYPTO_AEAD
help
This converts an arbitrary crypto algorithm into a parallel
algorithm that executes in kernel threads.
config CRYPTO_WORKQUEUE
tristate
config CRYPTO_CRYPTD
tristate "Software async crypto daemon"
select CRYPTO_BLKCIPHER
select CRYPTO_HASH
select CRYPTO_MANAGER
select CRYPTO_WORKQUEUE
help
This is a generic software asynchronous crypto daemon that
converts an arbitrary synchronous software crypto algorithm
into an asynchronous algorithm that executes in a kernel thread.
config CRYPTO_AUTHENC
tristate "Authenc support"
select CRYPTO_AEAD
select CRYPTO_BLKCIPHER
select CRYPTO_MANAGER
select CRYPTO_HASH
help
Authenc: Combined mode wrapper for IPsec.
This is required for IPSec.
config CRYPTO_TEST
tristate "Testing module"
depends on m
select CRYPTO_MANAGER
help
Quick & dirty crypto test module.
config CRYPTO_ABLK_HELPER
tristate
select CRYPTO_CRYPTD
config CRYPTO_GLUE_HELPER_X86
tristate
depends on X86
select CRYPTO_ALGAPI
comment "Authenticated Encryption with Associated Data"
config CRYPTO_CCM
tristate "CCM support"
select CRYPTO_CTR
select CRYPTO_AEAD
help
Support for Counter with CBC MAC. Required for IPsec.
config CRYPTO_GCM
tristate "GCM/GMAC support"
select CRYPTO_CTR
select CRYPTO_AEAD
select CRYPTO_GHASH
select CRYPTO_NULL
help
Support for Galois/Counter Mode (GCM) and Galois Message
Authentication Code (GMAC). Required for IPSec.
config CRYPTO_SEQIV
tristate "Sequence Number IV Generator"
select CRYPTO_AEAD
select CRYPTO_BLKCIPHER
select CRYPTO_RNG
help
This IV generator generates an IV based on a sequence number by
xoring it with a salt. This algorithm is mainly useful for CTR
comment "Block modes"
config CRYPTO_CBC
tristate "CBC support"
select CRYPTO_BLKCIPHER
select CRYPTO_MANAGER
help
CBC: Cipher Block Chaining mode
This block cipher algorithm is required for IPSec.
config CRYPTO_CTR
tristate "CTR support"
select CRYPTO_BLKCIPHER
select CRYPTO_SEQIV
select CRYPTO_MANAGER
help
CTR: Counter mode
This block cipher algorithm is required for IPSec.
config CRYPTO_CTS
tristate "CTS support"
select CRYPTO_BLKCIPHER
help
CTS: Cipher Text Stealing
This is the Cipher Text Stealing mode as described by
Section 8 of rfc2040 and referenced by rfc3962.
(rfc3962 includes errata information in its Appendix A)
This mode is required for Kerberos gss mechanism support
for AES encryption.
config CRYPTO_ECB
tristate "ECB support"
select CRYPTO_BLKCIPHER
select CRYPTO_MANAGER
help
ECB: Electronic CodeBook mode
This is the simplest block cipher algorithm. It simply encrypts
the input block by block.
config CRYPTO_LRW
tristate "LRW support"
select CRYPTO_BLKCIPHER
select CRYPTO_MANAGER
select CRYPTO_GF128MUL
help
LRW: Liskov Rivest Wagner, a tweakable, non malleable, non movable
narrow block cipher mode for dm-crypt. Use it with cipher
specification string aes-lrw-benbi, the key must be 256, 320 or 384.
The first 128, 192 or 256 bits in the key are used for AES and the
rest is used to tie each cipher block to its logical position.
config CRYPTO_PCBC
tristate "PCBC support"
select CRYPTO_BLKCIPHER
select CRYPTO_MANAGER
help
PCBC: Propagating Cipher Block Chaining mode
This block cipher algorithm is required for RxRPC.
config CRYPTO_XTS
tristate "XTS support"
select CRYPTO_BLKCIPHER
select CRYPTO_MANAGER
select CRYPTO_GF128MUL
help
XTS: IEEE1619/D16 narrow block cipher use with aes-xts-plain,
key size 256, 384 or 512 bits. This implementation currently
can't handle a sectorsize which is not a multiple of 16 bytes.
comment "Hash modes"
config CRYPTO_CMAC
tristate "CMAC support"
select CRYPTO_HASH
select CRYPTO_MANAGER
help
Cipher-based Message Authentication Code (CMAC) specified by
The National Institute of Standards and Technology (NIST).
https://tools.ietf.org/html/rfc4493
http://csrc.nist.gov/publications/nistpubs/800-38B/SP_800-38B.pdf
config CRYPTO_HMAC
tristate "HMAC support"
select CRYPTO_HASH
select CRYPTO_MANAGER
help
HMAC: Keyed-Hashing for Message Authentication (RFC2104).
This is required for IPSec.
config CRYPTO_XCBC
tristate "XCBC support"
select CRYPTO_HASH
select CRYPTO_MANAGER
help
XCBC: Keyed-Hashing with encryption algorithm
http://www.ietf.org/rfc/rfc3566.txt
http://csrc.nist.gov/encryption/modes/proposedmodes/
xcbc-mac/xcbc-mac-spec.pdf
config CRYPTO_VMAC
tristate "VMAC support"
select CRYPTO_HASH
select CRYPTO_MANAGER
help
VMAC is a message authentication algorithm designed for
very high speed on 64-bit architectures.
See also:
<http://fastcrypto.org/vmac>
comment "Digest"
config CRYPTO_CRC32C
tristate "CRC32c CRC algorithm"
select CRYPTO_HASH
select CRC32
help
Castagnoli, et al Cyclic Redundancy-Check Algorithm. Used
by iSCSI for header and data digests and by others.
See Castagnoli93. Module will be crc32c.
config CRYPTO_CRC32C_INTEL
tristate "CRC32c INTEL hardware acceleration"
depends on X86
select CRYPTO_HASH
help
In Intel processor with SSE4.2 supported, the processor will
support CRC32C implementation using hardware accelerated CRC32
instruction. This option will create 'crc32c-intel' module,
which will enable any routine to use the CRC32 instruction to
gain performance compared with software implementation.
Module will be crc32c-intel.
config CRYPTO_CRC32C_SPARC64
tristate "CRC32c CRC algorithm (SPARC64)"
depends on SPARC64
select CRYPTO_HASH
select CRC32
help
CRC32c CRC algorithm implemented using sparc64 crypto instructions,
when available.
config CRYPTO_CRC32
tristate "CRC32 CRC algorithm"
select CRYPTO_HASH
select CRC32
help
CRC-32-IEEE 802.3 cyclic redundancy-check algorithm.
Shash crypto api wrappers to crc32_le function.
config CRYPTO_CRC32_PCLMUL
tristate "CRC32 PCLMULQDQ hardware acceleration"
depends on X86
select CRYPTO_HASH
select CRC32
help
From Intel Westmere and AMD Bulldozer processor with SSE4.2
and PCLMULQDQ supported, the processor will support
CRC32 PCLMULQDQ implementation using hardware accelerated PCLMULQDQ
instruction. This option will create 'crc32-plcmul' module,
which will enable any routine to use the CRC-32-IEEE 802.3 checksum
and gain better performance as compared with the table implementation.
config CRYPTO_CRCT10DIF
tristate "CRCT10DIF algorithm"
select CRYPTO_HASH
help
CRC T10 Data Integrity Field computation is being cast as
a crypto transform. This allows for faster crc t10 diff
transforms to be used if they are available.
config CRYPTO_CRCT10DIF_PCLMUL
tristate "CRCT10DIF PCLMULQDQ hardware acceleration"
depends on X86 && 64BIT && CRC_T10DIF
select CRYPTO_HASH
help
For x86_64 processors with SSE4.2 and PCLMULQDQ supported,
CRC T10 DIF PCLMULQDQ computation can be hardware
accelerated PCLMULQDQ instruction. This option will create
'crct10dif-plcmul' module, which is faster when computing the
crct10dif checksum as compared with the generic table implementation.
config CRYPTO_GHASH
tristate "GHASH digest algorithm"
select CRYPTO_GF128MUL
help
GHASH is message digest algorithm for GCM (Galois/Counter Mode).
config CRYPTO_MD4
tristate "MD4 digest algorithm"
select CRYPTO_HASH
help
MD4 message digest algorithm (RFC1320).
config CRYPTO_MD5
tristate "MD5 digest algorithm"
select CRYPTO_HASH
help
MD5 message digest algorithm (RFC1321).
config CRYPTO_MD5_SPARC64
tristate "MD5 digest algorithm (SPARC64)"
depends on SPARC64
select CRYPTO_MD5
select CRYPTO_HASH
help
MD5 message digest algorithm (RFC1321) implemented
using sparc64 crypto instructions, when available.
config CRYPTO_MICHAEL_MIC
tristate "Michael MIC keyed digest algorithm"
select CRYPTO_HASH
help
Michael MIC is used for message integrity protection in TKIP
(IEEE 802.11i). This algorithm is required for TKIP, but it
should not be used for other purposes because of the weakness
of the algorithm.
config CRYPTO_RMD128
tristate "RIPEMD-128 digest algorithm"
select CRYPTO_HASH
help
RIPEMD-128 (ISO/IEC 10118-3:2004).
RIPEMD-128 is a 128-bit cryptographic hash function. It should only
be used as a secure replacement for RIPEMD. For other use cases,
RIPEMD-160 should be used.
Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
config CRYPTO_RMD160
tristate "RIPEMD-160 digest algorithm"
select CRYPTO_HASH
help
RIPEMD-160 (ISO/IEC 10118-3:2004).
RIPEMD-160 is a 160-bit cryptographic hash function. It is intended
to be used as a secure replacement for the 128-bit hash functions
MD4, MD5 and it's predecessor RIPEMD
(not to be confused with RIPEMD-128).
It's speed is comparable to SHA1 and there are no known attacks
against RIPEMD-160.
Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
config CRYPTO_RMD256
tristate "RIPEMD-256 digest algorithm"
select CRYPTO_HASH
help
RIPEMD-256 is an optional extension of RIPEMD-128 with a
256 bit hash. It is intended for applications that require
longer hash-results, without needing a larger security level
(than RIPEMD-128).
Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
config CRYPTO_RMD320
tristate "RIPEMD-320 digest algorithm"
select CRYPTO_HASH
help
RIPEMD-320 is an optional extension of RIPEMD-160 with a
320 bit hash. It is intended for applications that require
longer hash-results, without needing a larger security level
(than RIPEMD-160).
Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
config CRYPTO_SHA1
tristate "SHA1 digest algorithm"
select CRYPTO_HASH
help
SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2).
config CRYPTO_SHA1_SSSE3
tristate "SHA1 digest algorithm (SSSE3/AVX/AVX2)"
depends on X86 && 64BIT
select CRYPTO_SHA1
select CRYPTO_HASH
help
SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
using Supplemental SSE3 (SSSE3) instructions or Advanced Vector
Extensions (AVX/AVX2), when available.
config CRYPTO_SHA256_SSSE3
tristate "SHA256 digest algorithm (SSSE3/AVX/AVX2)"
depends on X86 && 64BIT
select CRYPTO_SHA256
select CRYPTO_HASH
help
SHA-256 secure hash standard (DFIPS 180-2) implemented
using Supplemental SSE3 (SSSE3) instructions, or Advanced Vector
Extensions version 1 (AVX1), or Advanced Vector Extensions
version 2 (AVX2) instructions, when available.
config CRYPTO_SHA512_SSSE3
tristate "SHA512 digest algorithm (SSSE3/AVX/AVX2)"
depends on X86 && 64BIT
select CRYPTO_SHA512
select CRYPTO_HASH
help
SHA-512 secure hash standard (DFIPS 180-2) implemented
using Supplemental SSE3 (SSSE3) instructions, or Advanced Vector
Extensions version 1 (AVX1), or Advanced Vector Extensions
version 2 (AVX2) instructions, when available.
config CRYPTO_SHA1_SPARC64
tristate "SHA1 digest algorithm (SPARC64)"
depends on SPARC64
select CRYPTO_SHA1
select CRYPTO_HASH
help
SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
using sparc64 crypto instructions, when available.
config CRYPTO_SHA1_ARM
tristate "SHA1 digest algorithm (ARM-asm)"
depends on ARM
select CRYPTO_SHA1
select CRYPTO_HASH
help
SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
using optimized ARM assembler.
config CRYPTO_SHA1_PPC
tristate "SHA1 digest algorithm (powerpc)"
depends on PPC
help
This is the powerpc hardware accelerated implementation of the
SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2).
config CRYPTO_SHA256
tristate "SHA224 and SHA256 digest algorithm"
select CRYPTO_HASH
help
SHA256 secure hash standard (DFIPS 180-2).
This version of SHA implements a 256 bit hash with 128 bits of
security against collision attacks.
This code also includes SHA-224, a 224 bit hash with 112 bits
of security against collision attacks.
config CRYPTO_SHA256_SPARC64
tristate "SHA224 and SHA256 digest algorithm (SPARC64)"
depends on SPARC64
select CRYPTO_SHA256
select CRYPTO_HASH
help
SHA-256 secure hash standard (DFIPS 180-2) implemented
using sparc64 crypto instructions, when available.
config CRYPTO_SHA512
tristate "SHA384 and SHA512 digest algorithms"
select CRYPTO_HASH
help
SHA512 secure hash standard (DFIPS 180-2).
This version of SHA implements a 512 bit hash with 256 bits of
security against collision attacks.
This code also includes SHA-384, a 384 bit hash with 192 bits
of security against collision attacks.
config CRYPTO_SHA512_SPARC64
tristate "SHA384 and SHA512 digest algorithm (SPARC64)"
depends on SPARC64
select CRYPTO_SHA512
select CRYPTO_HASH
help
SHA-512 secure hash standard (DFIPS 180-2) implemented
using sparc64 crypto instructions, when available.
config CRYPTO_TGR192
tristate "Tiger digest algorithms"
select CRYPTO_HASH
help
Tiger hash algorithm 192, 160 and 128-bit hashes
Tiger is a hash function optimized for 64-bit processors while
still having decent performance on 32-bit processors.
Tiger was developed by Ross Anderson and Eli Biham.
See also:
<http://www.cs.technion.ac.il/~biham/Reports/Tiger/>.
config CRYPTO_WP512
tristate "Whirlpool digest algorithms"
select CRYPTO_HASH
help
Whirlpool hash algorithm 512, 384 and 256-bit hashes
Whirlpool-512 is part of the NESSIE cryptographic primitives.
Whirlpool will be part of the ISO/IEC 10118-3:2003(E) standard
See also:
<http://www.larc.usp.br/~pbarreto/WhirlpoolPage.html>
config CRYPTO_GHASH_CLMUL_NI_INTEL
tristate "GHASH digest algorithm (CLMUL-NI accelerated)"
depends on X86 && 64BIT
select CRYPTO_CRYPTD
help
GHASH is message digest algorithm for GCM (Galois/Counter Mode).
The implementation is accelerated by CLMUL-NI of Intel.
comment "Ciphers"
config CRYPTO_AES
tristate "AES cipher algorithms"
select CRYPTO_ALGAPI
help
AES cipher algorithms (FIPS-197). AES uses the Rijndael
algorithm.
Rijndael appears to be consistently a very good performer in
both hardware and software across a wide range of computing
environments regardless of its use in feedback or non-feedback
modes. Its key setup time is excellent, and its key agility is
good. Rijndael's very low memory requirements make it very well
suited for restricted-space environments, in which it also
demonstrates excellent performance. Rijndael's operations are
among the easiest to defend against power and timing attacks.
The AES specifies three key sizes: 128, 192 and 256 bits
See <http://csrc.nist.gov/CryptoToolkit/aes/> for more information.
config CRYPTO_AES_586
tristate "AES cipher algorithms (i586)"
depends on (X86 || UML_X86) && !64BIT
select CRYPTO_ALGAPI
select CRYPTO_AES
help
AES cipher algorithms (FIPS-197). AES uses the Rijndael
algorithm.
Rijndael appears to be consistently a very good performer in
both hardware and software across a wide range of computing
environments regardless of its use in feedback or non-feedback
modes. Its key setup time is excellent, and its key agility is
good. Rijndael's very low memory requirements make it very well
suited for restricted-space environments, in which it also
demonstrates excellent performance. Rijndael's operations are
among the easiest to defend against power and timing attacks.
The AES specifies three key sizes: 128, 192 and 256 bits
See <http://csrc.nist.gov/encryption/aes/> for more information.
config CRYPTO_AES_X86_64
tristate "AES cipher algorithms (x86_64)"
depends on (X86 || UML_X86) && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_AES
help
AES cipher algorithms (FIPS-197). AES uses the Rijndael
algorithm.
Rijndael appears to be consistently a very good performer in
both hardware and software across a wide range of computing
environments regardless of its use in feedback or non-feedback
modes. Its key setup time is excellent, and its key agility is
good. Rijndael's very low memory requirements make it very well
suited for restricted-space environments, in which it also
demonstrates excellent performance. Rijndael's operations are
among the easiest to defend against power and timing attacks.
The AES specifies three key sizes: 128, 192 and 256 bits
See <http://csrc.nist.gov/encryption/aes/> for more information.
config CRYPTO_AES_NI_INTEL
tristate "AES cipher algorithms (AES-NI)"
depends on X86
select CRYPTO_AES_X86_64 if 64BIT
select CRYPTO_AES_586 if !64BIT
select CRYPTO_CRYPTD
select CRYPTO_ABLK_HELPER
select CRYPTO_ALGAPI
select CRYPTO_GLUE_HELPER_X86 if 64BIT
select CRYPTO_LRW
select CRYPTO_XTS
help
Use Intel AES-NI instructions for AES algorithm.
AES cipher algorithms (FIPS-197). AES uses the Rijndael
algorithm.
Rijndael appears to be consistently a very good performer in
both hardware and software across a wide range of computing
environments regardless of its use in feedback or non-feedback
modes. Its key setup time is excellent, and its key agility is
good. Rijndael's very low memory requirements make it very well
suited for restricted-space environments, in which it also
demonstrates excellent performance. Rijndael's operations are
among the easiest to defend against power and timing attacks.
The AES specifies three key sizes: 128, 192 and 256 bits
See <http://csrc.nist.gov/encryption/aes/> for more information.
In addition to AES cipher algorithm support, the acceleration
for some popular block cipher mode is supported too, including
ECB, CBC, LRW, PCBC, XTS. The 64 bit version has additional
acceleration for CTR.
config CRYPTO_AES_SPARC64
tristate "AES cipher algorithms (SPARC64)"
depends on SPARC64
select CRYPTO_CRYPTD
select CRYPTO_ALGAPI
help
Use SPARC64 crypto opcodes for AES algorithm.
AES cipher algorithms (FIPS-197). AES uses the Rijndael
algorithm.
Rijndael appears to be consistently a very good performer in
both hardware and software across a wide range of computing
environments regardless of its use in feedback or non-feedback
modes. Its key setup time is excellent, and its key agility is
good. Rijndael's very low memory requirements make it very well
suited for restricted-space environments, in which it also
demonstrates excellent performance. Rijndael's operations are
among the easiest to defend against power and timing attacks.
The AES specifies three key sizes: 128, 192 and 256 bits
See <http://csrc.nist.gov/encryption/aes/> for more information.
In addition to AES cipher algorithm support, the acceleration
for some popular block cipher mode is supported too, including
ECB and CBC.
config CRYPTO_AES_ARM
tristate "AES cipher algorithms (ARM-asm)"
depends on ARM
select CRYPTO_ALGAPI
select CRYPTO_AES
help
Use optimized AES assembler routines for ARM platforms.
AES cipher algorithms (FIPS-197). AES uses the Rijndael
algorithm.
Rijndael appears to be consistently a very good performer in
both hardware and software across a wide range of computing
environments regardless of its use in feedback or non-feedback
modes. Its key setup time is excellent, and its key agility is
good. Rijndael's very low memory requirements make it very well
suited for restricted-space environments, in which it also
demonstrates excellent performance. Rijndael's operations are
among the easiest to defend against power and timing attacks.
The AES specifies three key sizes: 128, 192 and 256 bits
See <http://csrc.nist.gov/encryption/aes/> for more information.
config CRYPTO_AES_ARM_BS
tristate "Bit sliced AES using NEON instructions"
depends on ARM && KERNEL_MODE_NEON
select CRYPTO_ALGAPI
select CRYPTO_AES_ARM
select CRYPTO_ABLK_HELPER
help
Use a faster and more secure NEON based implementation of AES in CBC,
CTR and XTS modes
Bit sliced AES gives around 45% speedup on Cortex-A15 for CTR mode
and for XTS mode encryption, CBC and XTS mode decryption speedup is
around 25%. (CBC encryption speed is not affected by this driver.)
This implementation does not rely on any lookup tables so it is
believed to be invulnerable to cache timing attacks.
config CRYPTO_ANUBIS
tristate "Anubis cipher algorithm"
select CRYPTO_ALGAPI
help
Anubis cipher algorithm.
Anubis is a variable key length cipher which can use keys from
128 bits to 320 bits in length. It was evaluated as a entrant
in the NESSIE competition.
See also:
<https://www.cosic.esat.kuleuven.be/nessie/reports/>
<http://www.larc.usp.br/~pbarreto/AnubisPage.html>
config CRYPTO_ARC4
tristate "ARC4 cipher algorithm"
select CRYPTO_BLKCIPHER
help
ARC4 cipher algorithm.
ARC4 is a stream cipher using keys ranging from 8 bits to 2048
bits in length. This algorithm is required for driver-based
WEP, but it should not be for other purposes because of the
weakness of the algorithm.
config CRYPTO_BLOWFISH
tristate "Blowfish cipher algorithm"
select CRYPTO_ALGAPI
select CRYPTO_BLOWFISH_COMMON
help
Blowfish cipher algorithm, by Bruce Schneier.
This is a variable key length cipher which can use keys from 32
bits to 448 bits in length. It's fast, simple and specifically
designed for use on "large microprocessors".
See also:
<http://www.schneier.com/blowfish.html>
config CRYPTO_BLOWFISH_COMMON
tristate
help
Common parts of the Blowfish cipher algorithm shared by the
generic c and the assembler implementations.
See also:
<http://www.schneier.com/blowfish.html>
config CRYPTO_BLOWFISH_X86_64
tristate "Blowfish cipher algorithm (x86_64)"
depends on X86 && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_BLOWFISH_COMMON
help
Blowfish cipher algorithm (x86_64), by Bruce Schneier.
This is a variable key length cipher which can use keys from 32
bits to 448 bits in length. It's fast, simple and specifically
designed for use on "large microprocessors".
See also:
<http://www.schneier.com/blowfish.html>
config CRYPTO_CAMELLIA
tristate "Camellia cipher algorithms"
depends on CRYPTO
select CRYPTO_ALGAPI
help
Camellia cipher algorithms module.
Camellia is a symmetric key block cipher developed jointly
at NTT and Mitsubishi Electric Corporation.
The Camellia specifies three key sizes: 128, 192 and 256 bits.
See also:
<https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
config CRYPTO_CAMELLIA_X86_64
tristate "Camellia cipher algorithm (x86_64)"
depends on X86 && 64BIT
depends on CRYPTO
select CRYPTO_ALGAPI
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_LRW
select CRYPTO_XTS
help
Camellia cipher algorithm module (x86_64).
Camellia is a symmetric key block cipher developed jointly
at NTT and Mitsubishi Electric Corporation.
The Camellia specifies three key sizes: 128, 192 and 256 bits.
See also:
<https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
config CRYPTO_CAMELLIA_AESNI_AVX_X86_64
tristate "Camellia cipher algorithm (x86_64/AES-NI/AVX)"
depends on X86 && 64BIT
depends on CRYPTO
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
select CRYPTO_ABLK_HELPER
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_CAMELLIA_X86_64
select CRYPTO_LRW
select CRYPTO_XTS
help
Camellia cipher algorithm module (x86_64/AES-NI/AVX).
Camellia is a symmetric key block cipher developed jointly
at NTT and Mitsubishi Electric Corporation.
The Camellia specifies three key sizes: 128, 192 and 256 bits.
See also:
<https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
config CRYPTO_CAMELLIA_AESNI_AVX2_X86_64
tristate "Camellia cipher algorithm (x86_64/AES-NI/AVX2)"
depends on X86 && 64BIT
depends on CRYPTO
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
select CRYPTO_ABLK_HELPER
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_CAMELLIA_X86_64
select CRYPTO_CAMELLIA_AESNI_AVX_X86_64
select CRYPTO_LRW
select CRYPTO_XTS
help
Camellia cipher algorithm module (x86_64/AES-NI/AVX2).
Camellia is a symmetric key block cipher developed jointly
at NTT and Mitsubishi Electric Corporation.
The Camellia specifies three key sizes: 128, 192 and 256 bits.
See also:
<https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
config CRYPTO_CAMELLIA_SPARC64
tristate "Camellia cipher algorithm (SPARC64)"
depends on SPARC64
depends on CRYPTO
select CRYPTO_ALGAPI
help
Camellia cipher algorithm module (SPARC64).
Camellia is a symmetric key block cipher developed jointly
at NTT and Mitsubishi Electric Corporation.
The Camellia specifies three key sizes: 128, 192 and 256 bits.
See also:
<https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
config CRYPTO_CAST_COMMON
tristate
help
Common parts of the CAST cipher algorithms shared by the
generic c and the assembler implementations.
config CRYPTO_CAST5
tristate "CAST5 (CAST-128) cipher algorithm"
select CRYPTO_ALGAPI
select CRYPTO_CAST_COMMON
help
The CAST5 encryption algorithm (synonymous with CAST-128) is
described in RFC2144.
config CRYPTO_CAST5_AVX_X86_64
tristate "CAST5 (CAST-128) cipher algorithm (x86_64/AVX)"
depends on X86 && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
select CRYPTO_ABLK_HELPER
select CRYPTO_CAST_COMMON
select CRYPTO_CAST5
help
The CAST5 encryption algorithm (synonymous with CAST-128) is
described in RFC2144.
This module provides the Cast5 cipher algorithm that processes
sixteen blocks parallel using the AVX instruction set.
config CRYPTO_CAST6
tristate "CAST6 (CAST-256) cipher algorithm"
select CRYPTO_ALGAPI
select CRYPTO_CAST_COMMON
help
The CAST6 encryption algorithm (synonymous with CAST-256) is
described in RFC2612.
config CRYPTO_CAST6_AVX_X86_64
tristate "CAST6 (CAST-256) cipher algorithm (x86_64/AVX)"
depends on X86 && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
select CRYPTO_ABLK_HELPER
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_CAST_COMMON
select CRYPTO_CAST6
select CRYPTO_LRW
select CRYPTO_XTS
help
The CAST6 encryption algorithm (synonymous with CAST-256) is
described in RFC2612.
This module provides the Cast6 cipher algorithm that processes
eight blocks parallel using the AVX instruction set.
config CRYPTO_DES
tristate "DES and Triple DES EDE cipher algorithms"
select CRYPTO_ALGAPI
help
DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3).
config CRYPTO_DES_SPARC64
tristate "DES and Triple DES EDE cipher algorithms (SPARC64)"
depends on SPARC64
select CRYPTO_ALGAPI
select CRYPTO_DES
help
DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3),
optimized using SPARC64 crypto opcodes.
config CRYPTO_FCRYPT
tristate "FCrypt cipher algorithm"
select CRYPTO_ALGAPI
select CRYPTO_BLKCIPHER
help
FCrypt algorithm used by RxRPC.
config CRYPTO_KHAZAD
tristate "Khazad cipher algorithm"
select CRYPTO_ALGAPI
help
Khazad cipher algorithm.
Khazad was a finalist in the initial NESSIE competition. It is
an algorithm optimized for 64-bit processors with good performance
on 32-bit processors. Khazad uses an 128 bit key size.
See also:
<http://www.larc.usp.br/~pbarreto/KhazadPage.html>
config CRYPTO_SALSA20
tristate "Salsa20 stream cipher algorithm"
select CRYPTO_BLKCIPHER
help
Salsa20 stream cipher algorithm.
Salsa20 is a stream cipher submitted to eSTREAM, the ECRYPT
Stream Cipher Project. See <http://www.ecrypt.eu.org/stream/>
The Salsa20 stream cipher algorithm is designed by Daniel J.
Bernstein <djb@cr.yp.to>. See <http://cr.yp.to/snuffle.html>
config CRYPTO_SALSA20_586
tristate "Salsa20 stream cipher algorithm (i586)"
depends on (X86 || UML_X86) && !64BIT
select CRYPTO_BLKCIPHER
help
Salsa20 stream cipher algorithm.
Salsa20 is a stream cipher submitted to eSTREAM, the ECRYPT
Stream Cipher Project. See <http://www.ecrypt.eu.org/stream/>
The Salsa20 stream cipher algorithm is designed by Daniel J.
Bernstein <djb@cr.yp.to>. See <http://cr.yp.to/snuffle.html>
config CRYPTO_SALSA20_X86_64
tristate "Salsa20 stream cipher algorithm (x86_64)"
depends on (X86 || UML_X86) && 64BIT
select CRYPTO_BLKCIPHER
help
Salsa20 stream cipher algorithm.
Salsa20 is a stream cipher submitted to eSTREAM, the ECRYPT
Stream Cipher Project. See <http://www.ecrypt.eu.org/stream/>
The Salsa20 stream cipher algorithm is designed by Daniel J.
Bernstein <djb@cr.yp.to>. See <http://cr.yp.to/snuffle.html>
config CRYPTO_SEED
tristate "SEED cipher algorithm"
select CRYPTO_ALGAPI
help
SEED cipher algorithm (RFC4269).
SEED is a 128-bit symmetric key block cipher that has been
developed by KISA (Korea Information Security Agency) as a
national standard encryption algorithm of the Republic of Korea.
It is a 16 round block cipher with the key size of 128 bit.
See also:
<http://www.kisa.or.kr/kisa/seed/jsp/seed_eng.jsp>
config CRYPTO_SERPENT
tristate "Serpent cipher algorithm"
select CRYPTO_ALGAPI
help
Serpent cipher algorithm, by Anderson, Biham & Knudsen.
Keys are allowed to be from 0 to 256 bits in length, in steps
of 8 bits. Also includes the 'Tnepres' algorithm, a reversed
variant of Serpent for compatibility with old kerneli.org code.
See also:
<http://www.cl.cam.ac.uk/~rja14/serpent.html>
config CRYPTO_SERPENT_SSE2_X86_64
tristate "Serpent cipher algorithm (x86_64/SSE2)"
depends on X86 && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
select CRYPTO_ABLK_HELPER
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_SERPENT
select CRYPTO_LRW
select CRYPTO_XTS
help
Serpent cipher algorithm, by Anderson, Biham & Knudsen.
Keys are allowed to be from 0 to 256 bits in length, in steps
of 8 bits.
This module provides Serpent cipher algorithm that processes eigth
blocks parallel using SSE2 instruction set.
See also:
<http://www.cl.cam.ac.uk/~rja14/serpent.html>
config CRYPTO_SERPENT_SSE2_586
tristate "Serpent cipher algorithm (i586/SSE2)"
depends on X86 && !64BIT
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
select CRYPTO_ABLK_HELPER
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_SERPENT
select CRYPTO_LRW
select CRYPTO_XTS
help
Serpent cipher algorithm, by Anderson, Biham & Knudsen.
Keys are allowed to be from 0 to 256 bits in length, in steps
of 8 bits.
This module provides Serpent cipher algorithm that processes four
blocks parallel using SSE2 instruction set.
See also:
<http://www.cl.cam.ac.uk/~rja14/serpent.html>
config CRYPTO_SERPENT_AVX_X86_64
tristate "Serpent cipher algorithm (x86_64/AVX)"
depends on X86 && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
select CRYPTO_ABLK_HELPER
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_SERPENT
select CRYPTO_LRW
select CRYPTO_XTS
help
Serpent cipher algorithm, by Anderson, Biham & Knudsen.
Keys are allowed to be from 0 to 256 bits in length, in steps
of 8 bits.
This module provides the Serpent cipher algorithm that processes
eight blocks parallel using the AVX instruction set.
See also:
<http://www.cl.cam.ac.uk/~rja14/serpent.html>
config CRYPTO_SERPENT_AVX2_X86_64
tristate "Serpent cipher algorithm (x86_64/AVX2)"
depends on X86 && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
select CRYPTO_ABLK_HELPER
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_SERPENT
select CRYPTO_SERPENT_AVX_X86_64
select CRYPTO_LRW
select CRYPTO_XTS
help
Serpent cipher algorithm, by Anderson, Biham & Knudsen.
Keys are allowed to be from 0 to 256 bits in length, in steps
of 8 bits.
This module provides Serpent cipher algorithm that processes 16
blocks parallel using AVX2 instruction set.
See also:
<http://www.cl.cam.ac.uk/~rja14/serpent.html>
config CRYPTO_TEA
tristate "TEA, XTEA and XETA cipher algorithms"
select CRYPTO_ALGAPI
help
TEA cipher algorithm.
Tiny Encryption Algorithm is a simple cipher that uses
many rounds for security. It is very fast and uses
little memory.
Xtendend Tiny Encryption Algorithm is a modification to
the TEA algorithm to address a potential key weakness
in the TEA algorithm.
Xtendend Encryption Tiny Algorithm is a mis-implementation
of the XTEA algorithm for compatibility purposes.
config CRYPTO_TWOFISH
tristate "Twofish cipher algorithm"
select CRYPTO_ALGAPI
select CRYPTO_TWOFISH_COMMON
help
Twofish cipher algorithm.
Twofish was submitted as an AES (Advanced Encryption Standard)
candidate cipher by researchers at CounterPane Systems. It is a
16 round block cipher supporting key sizes of 128, 192, and 256
bits.
See also:
<http://www.schneier.com/twofish.html>
config CRYPTO_TWOFISH_COMMON
tristate
help
Common parts of the Twofish cipher algorithm shared by the
generic c and the assembler implementations.
config CRYPTO_TWOFISH_586
tristate "Twofish cipher algorithms (i586)"
depends on (X86 || UML_X86) && !64BIT
select CRYPTO_ALGAPI
select CRYPTO_TWOFISH_COMMON
help
Twofish cipher algorithm.
Twofish was submitted as an AES (Advanced Encryption Standard)
candidate cipher by researchers at CounterPane Systems. It is a
16 round block cipher supporting key sizes of 128, 192, and 256
bits.
See also:
<http://www.schneier.com/twofish.html>
config CRYPTO_TWOFISH_X86_64
tristate "Twofish cipher algorithm (x86_64)"
depends on (X86 || UML_X86) && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_TWOFISH_COMMON
help
Twofish cipher algorithm (x86_64).
Twofish was submitted as an AES (Advanced Encryption Standard)
candidate cipher by researchers at CounterPane Systems. It is a
16 round block cipher supporting key sizes of 128, 192, and 256
bits.
See also:
<http://www.schneier.com/twofish.html>
config CRYPTO_TWOFISH_X86_64_3WAY
tristate "Twofish cipher algorithm (x86_64, 3-way parallel)"
depends on X86 && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_TWOFISH_COMMON
select CRYPTO_TWOFISH_X86_64
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_LRW
select CRYPTO_XTS
help
Twofish cipher algorithm (x86_64, 3-way parallel).
Twofish was submitted as an AES (Advanced Encryption Standard)
candidate cipher by researchers at CounterPane Systems. It is a
16 round block cipher supporting key sizes of 128, 192, and 256
bits.
This module provides Twofish cipher algorithm that processes three
blocks parallel, utilizing resources of out-of-order CPUs better.
See also:
<http://www.schneier.com/twofish.html>
config CRYPTO_TWOFISH_AVX_X86_64
tristate "Twofish cipher algorithm (x86_64/AVX)"
depends on X86 && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
select CRYPTO_ABLK_HELPER
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_TWOFISH_COMMON
select CRYPTO_TWOFISH_X86_64
select CRYPTO_TWOFISH_X86_64_3WAY
select CRYPTO_LRW
select CRYPTO_XTS
help
Twofish cipher algorithm (x86_64/AVX).
Twofish was submitted as an AES (Advanced Encryption Standard)
candidate cipher by researchers at CounterPane Systems. It is a
16 round block cipher supporting key sizes of 128, 192, and 256
bits.
This module provides the Twofish cipher algorithm that processes
eight blocks parallel using the AVX Instruction Set.
See also:
<http://www.schneier.com/twofish.html>
comment "Compression"
config CRYPTO_DEFLATE
tristate "Deflate compression algorithm"
select CRYPTO_ALGAPI
select ZLIB_INFLATE
select ZLIB_DEFLATE
help
This is the Deflate algorithm (RFC1951), specified for use in
IPSec with the IPCOMP protocol (RFC3173, RFC2394).
You will most probably want this if using IPSec.
config CRYPTO_ZLIB
tristate "Zlib compression algorithm"
select CRYPTO_PCOMP
select ZLIB_INFLATE
select ZLIB_DEFLATE
select NLATTR
help
This is the zlib algorithm.
config CRYPTO_LZO
tristate "LZO compression algorithm"
select CRYPTO_ALGAPI
select LZO_COMPRESS
select LZO_DECOMPRESS
help
This is the LZO algorithm.
config CRYPTO_842
tristate "842 compression algorithm"
depends on CRYPTO_DEV_NX_COMPRESS
# 842 uses lzo if the hardware becomes unavailable
select LZO_COMPRESS
select LZO_DECOMPRESS
help
This is the 842 algorithm.
config CRYPTO_LZ4
tristate "LZ4 compression algorithm"
select CRYPTO_ALGAPI
select LZ4_COMPRESS
select LZ4_DECOMPRESS
help
This is the LZ4 algorithm.
config CRYPTO_LZ4HC
tristate "LZ4HC compression algorithm"
select CRYPTO_ALGAPI
select LZ4HC_COMPRESS
select LZ4_DECOMPRESS
help
This is the LZ4 high compression mode algorithm.
comment "Random Number Generation"
config CRYPTO_ANSI_CPRNG
tristate "Pseudo Random Number Generation for Cryptographic modules"
default m
select CRYPTO_AES
select CRYPTO_RNG
help
This option enables the generic pseudo random number generator
for cryptographic modules. Uses the Algorithm specified in
ANSI X9.31 A.2.4. Note that this option must be enabled if
CRYPTO_FIPS is selected
config CRYPTO_USER_API
tristate
config CRYPTO_USER_API_HASH
tristate "User-space interface for hash algorithms"
depends on NET
select CRYPTO_HASH
select CRYPTO_USER_API
help
This option enables the user-spaces interface for hash
algorithms.
config CRYPTO_USER_API_SKCIPHER
tristate "User-space interface for symmetric key cipher algorithms"
depends on NET
select CRYPTO_BLKCIPHER
select CRYPTO_USER_API
help
This option enables the user-spaces interface for symmetric
key cipher algorithms.
config CRYPTO_HASH_INFO
bool
source "drivers/crypto/Kconfig"
source crypto/asymmetric_keys/Kconfig
endif # if CRYPTO
Reference in New Issue View Git Blame Copy Permalink