mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-22 10:34:55 +08:00
455e73a07f
they're mostly minor cleanups and some debugfs stuff. The real work that's in here is the typical pile of clk driver updates and new SoC support. Per usual (or maybe just recent trends), Qualcomm gains a handful of SoC drivers additions and has the largest diffstat. After that there are quite a few updates to the Allwinner (sunxi) drivers to support modular drivers and Renesas is heavily updated to add more support for various clks. Overall it looks pretty normal. New Drivers: - Add MDMA and BDMA clks to Ingenic JZ4760 and JZ4770 - MediaTek mt7986 SoC basic support - Clock and reset driver for Toshiba Visconti SoCs - Initial clock driver for the Exynos7885 SoC (Samsung Galaxy A8) - Allwinner D1 clks - Lan966x Generic Clock Controller driver and associated DT bindings - Qualcomm SDX65, SM8450, and MSM8976 GCC clks - Qualcomm SDX65 and SM8450 RPMh clks Updates: - Set suppress_bind_attrs to true for i.MX8ULP driver - Switch from do_div to div64_ul for throughout all i.MX drivers - Fix imx8mn_clko1_sels for i.MX8MN - Remove unused IPG_AUDIO_ROOT from i.MX8MP - Switch parent for audio_root_clk to audio ahb in i.MX8MP driver - Removal of all remaining uses of __clk_lookup() in drivers/clk/samsung - Refactoring of the CPU clocks registration to use common interface - An update of the Exynos850 driver (support for more clock domains) required by the E850-96 development board - Prep for runtime PM and generic power domains on Tegra - Support modular Allwinner clk drivers via platform bus - Lan966x clock driver extended to support clock gating - Add serial (SCI1), watchdog (WDT), timer (OSTM), SPI (RSPI), and thermal (TSU) clocks and resets on Renesas RZ/G2L - Rework SDHI clock handling in the Renesas R-Car Gen3 and RZ/G2 clock drivers, and in the Renesas SDHI driver - Make the Cortex-A55 (I) clock on Renesas RZ/G2L programmable - Document support for the new Renesas R-Car S4-8 (R8A779F0) SoC - Add support for the new Renesas R-Car S4-8 (R8A779F0) SoC - Add GPU clock and resets on Renesas RZ/G2L - Add clk-provider.h to various Qualcomm clk drivers - devm version of clk_hw_register_gate() - kerneldoc fixes in a couple drivers -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmHfOa8RHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSX+Ew/9FaQLRh3ahN+qF8VMJ1K9qUciYBlU+UtC excKfTkJg+1JGMP8dGSRSi/aC/UyLPb0dJDRMKcSZPYIScP+wc3HJHm4i+CpxDcn /wXPW3tvY1CkVq1P7/baesoNiIle5zqpl4+0w9CN5KuoXctc35Pr1GqJ/C0XsDfQ DS3lpck65tr7Wy1muChT1ZR+7hGv6K7olR7FDYNVSDtfJcaOZENSLgbPF6eea0FR /dl+6o1COF23XAGF1GJg88DYRgnEqxLsfFTaC6Hz8DeQdKBVh9GF6tpgLhk7vsaG gcRZxU24KaUw0lNZGdzmagy8ZJ6aZhcuzXQKN9VecbTIhRYNTWmB1VsvbhhEVb1T 96kBAp/II1JZdh/8W7uOmg4Ahupap5+f6JKMfR3zD4aDXkNDsxyXBA5AXtC0GPGN 5340WiJsBz/dD9/YE+mQ7YZKhdvKaGEVbmVUpQHceapeTBk4EIHKSVIq5sKd7qiq ZHxOIizx5MgBJyoSeIxkB3j0KvwSTDNz6WM2F9gnNNtGfuSlA4NAnO1davINNQun +seP+deBviUl+P2u9iodRApfCiEuM3mA548KTba/Z1nJ7sN93/qrqr1FBAUSqY+k xNRXfXIzlOY9ifm6PlvU8QUK0XVtKjt0ld7pFzRkf6EU523DwzL2I2XIY2Eve2vA LaDihwcKyR0= =jB+l -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have a couple patches in the framework core this time around but they're mostly minor cleanups and some debugfs stuff. The real work that's in here is the typical pile of clk driver updates and new SoC support. Per usual (or maybe just recent trends), Qualcomm gains a handful of SoC drivers additions and has the largest diffstat. After that there are quite a few updates to the Allwinner (sunxi) drivers to support modular drivers and Renesas is heavily updated to add more support for various clks. Overall it looks pretty normal. New Drivers: - Add MDMA and BDMA clks to Ingenic JZ4760 and JZ4770 - MediaTek mt7986 SoC basic support - Clock and reset driver for Toshiba Visconti SoCs - Initial clock driver for the Exynos7885 SoC (Samsung Galaxy A8) - Allwinner D1 clks - Lan966x Generic Clock Controller driver and associated DT bindings - Qualcomm SDX65, SM8450, and MSM8976 GCC clks - Qualcomm SDX65 and SM8450 RPMh clks Updates: - Set suppress_bind_attrs to true for i.MX8ULP driver - Switch from do_div to div64_ul for throughout all i.MX drivers - Fix imx8mn_clko1_sels for i.MX8MN - Remove unused IPG_AUDIO_ROOT from i.MX8MP - Switch parent for audio_root_clk to audio ahb in i.MX8MP driver - Removal of all remaining uses of __clk_lookup() in drivers/clk/samsung - Refactoring of the CPU clocks registration to use common interface - An update of the Exynos850 driver (support for more clock domains) required by the E850-96 development board - Prep for runtime PM and generic power domains on Tegra - Support modular Allwinner clk drivers via platform bus - Lan966x clock driver extended to support clock gating - Add serial (SCI1), watchdog (WDT), timer (OSTM), SPI (RSPI), and thermal (TSU) clocks and resets on Renesas RZ/G2L - Rework SDHI clock handling in the Renesas R-Car Gen3 and RZ/G2 clock drivers, and in the Renesas SDHI driver - Make the Cortex-A55 (I) clock on Renesas RZ/G2L programmable - Document support for the new Renesas R-Car S4-8 (R8A779F0) SoC - Add support for the new Renesas R-Car S4-8 (R8A779F0) SoC - Add GPU clock and resets on Renesas RZ/G2L - Add clk-provider.h to various Qualcomm clk drivers - devm version of clk_hw_register_gate() - kerneldoc fixes in a couple drivers" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (131 commits) clk: visconti: Remove pointless NULL check in visconti_pll_add_lookup() clk: mediatek: add mt7986 clock support clk: mediatek: add mt7986 clock IDs dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC clk: mediatek: clk-gate: Use regmap_{set/clear}_bits helpers clk: mediatek: clk-gate: Shrink by adding clockgating bit check helper clk: x86: Fix clk_gate_flags for RV_CLK_GATE clk: x86: Use dynamic con_id string during clk registration ACPI: APD: Add a fmw property clk-name drivers: acpi: acpi_apd: Remove unused device property "is-rv" x86: clk: clk-fch: Add support for newer family of AMD's SOC clk: ingenic: Add MDMA and BDMA clocks dt-bindings: clk/ingenic: Add MDMA and BDMA clocks clk: bm1880: remove kfrees on static allocations clk: Drop unused COMMON_CLK_STM32MP157_SCMI config clk: st: clkgen-mux: search reg within node or parent clk: st: clkgen-fsyn: search reg within node or parent clk: Enable/Disable runtime PM for clk_summary MAINTAINERS: Add entries for Toshiba Visconti PLL and clock controller clk: visconti: Add support common clock driver and reset driver ...
2117 lines
56 KiB
C
2117 lines
56 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
||
/*
|
||
* Copyright (c) 2015, 2018, The Linux Foundation. All rights reserved.
|
||
* Copyright (c) 2021, Qualcomm Innovation Center, Inc. All rights reserved.
|
||
*/
|
||
|
||
#include <linux/kernel.h>
|
||
#include <linux/export.h>
|
||
#include <linux/clk-provider.h>
|
||
#include <linux/regmap.h>
|
||
#include <linux/delay.h>
|
||
|
||
#include "clk-alpha-pll.h"
|
||
#include "common.h"
|
||
|
||
#define PLL_MODE(p) ((p)->offset + 0x0)
|
||
# define PLL_OUTCTRL BIT(0)
|
||
# define PLL_BYPASSNL BIT(1)
|
||
# define PLL_RESET_N BIT(2)
|
||
# define PLL_OFFLINE_REQ BIT(7)
|
||
# define PLL_LOCK_COUNT_SHIFT 8
|
||
# define PLL_LOCK_COUNT_MASK 0x3f
|
||
# define PLL_BIAS_COUNT_SHIFT 14
|
||
# define PLL_BIAS_COUNT_MASK 0x3f
|
||
# define PLL_VOTE_FSM_ENA BIT(20)
|
||
# define PLL_FSM_ENA BIT(20)
|
||
# define PLL_VOTE_FSM_RESET BIT(21)
|
||
# define PLL_UPDATE BIT(22)
|
||
# define PLL_UPDATE_BYPASS BIT(23)
|
||
# define PLL_OFFLINE_ACK BIT(28)
|
||
# define ALPHA_PLL_ACK_LATCH BIT(29)
|
||
# define PLL_ACTIVE_FLAG BIT(30)
|
||
# define PLL_LOCK_DET BIT(31)
|
||
|
||
#define PLL_L_VAL(p) ((p)->offset + (p)->regs[PLL_OFF_L_VAL])
|
||
#define PLL_CAL_L_VAL(p) ((p)->offset + (p)->regs[PLL_OFF_CAL_L_VAL])
|
||
#define PLL_ALPHA_VAL(p) ((p)->offset + (p)->regs[PLL_OFF_ALPHA_VAL])
|
||
#define PLL_ALPHA_VAL_U(p) ((p)->offset + (p)->regs[PLL_OFF_ALPHA_VAL_U])
|
||
|
||
#define PLL_USER_CTL(p) ((p)->offset + (p)->regs[PLL_OFF_USER_CTL])
|
||
# define PLL_POST_DIV_SHIFT 8
|
||
# define PLL_POST_DIV_MASK(p) GENMASK((p)->width, 0)
|
||
# define PLL_ALPHA_EN BIT(24)
|
||
# define PLL_ALPHA_MODE BIT(25)
|
||
# define PLL_VCO_SHIFT 20
|
||
# define PLL_VCO_MASK 0x3
|
||
|
||
#define PLL_USER_CTL_U(p) ((p)->offset + (p)->regs[PLL_OFF_USER_CTL_U])
|
||
#define PLL_USER_CTL_U1(p) ((p)->offset + (p)->regs[PLL_OFF_USER_CTL_U1])
|
||
|
||
#define PLL_CONFIG_CTL(p) ((p)->offset + (p)->regs[PLL_OFF_CONFIG_CTL])
|
||
#define PLL_CONFIG_CTL_U(p) ((p)->offset + (p)->regs[PLL_OFF_CONFIG_CTL_U])
|
||
#define PLL_CONFIG_CTL_U1(p) ((p)->offset + (p)->regs[PLL_OFF_CONFIG_CTL_U1])
|
||
#define PLL_TEST_CTL(p) ((p)->offset + (p)->regs[PLL_OFF_TEST_CTL])
|
||
#define PLL_TEST_CTL_U(p) ((p)->offset + (p)->regs[PLL_OFF_TEST_CTL_U])
|
||
#define PLL_TEST_CTL_U1(p) ((p)->offset + (p)->regs[PLL_OFF_TEST_CTL_U1])
|
||
#define PLL_STATUS(p) ((p)->offset + (p)->regs[PLL_OFF_STATUS])
|
||
#define PLL_OPMODE(p) ((p)->offset + (p)->regs[PLL_OFF_OPMODE])
|
||
#define PLL_FRAC(p) ((p)->offset + (p)->regs[PLL_OFF_FRAC])
|
||
|
||
const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
|
||
[CLK_ALPHA_PLL_TYPE_DEFAULT] = {
|
||
[PLL_OFF_L_VAL] = 0x04,
|
||
[PLL_OFF_ALPHA_VAL] = 0x08,
|
||
[PLL_OFF_ALPHA_VAL_U] = 0x0c,
|
||
[PLL_OFF_USER_CTL] = 0x10,
|
||
[PLL_OFF_USER_CTL_U] = 0x14,
|
||
[PLL_OFF_CONFIG_CTL] = 0x18,
|
||
[PLL_OFF_TEST_CTL] = 0x1c,
|
||
[PLL_OFF_TEST_CTL_U] = 0x20,
|
||
[PLL_OFF_STATUS] = 0x24,
|
||
},
|
||
[CLK_ALPHA_PLL_TYPE_HUAYRA] = {
|
||
[PLL_OFF_L_VAL] = 0x04,
|
||
[PLL_OFF_ALPHA_VAL] = 0x08,
|
||
[PLL_OFF_USER_CTL] = 0x10,
|
||
[PLL_OFF_CONFIG_CTL] = 0x14,
|
||
[PLL_OFF_CONFIG_CTL_U] = 0x18,
|
||
[PLL_OFF_TEST_CTL] = 0x1c,
|
||
[PLL_OFF_TEST_CTL_U] = 0x20,
|
||
[PLL_OFF_STATUS] = 0x24,
|
||
},
|
||
[CLK_ALPHA_PLL_TYPE_BRAMMO] = {
|
||
[PLL_OFF_L_VAL] = 0x04,
|
||
[PLL_OFF_ALPHA_VAL] = 0x08,
|
||
[PLL_OFF_ALPHA_VAL_U] = 0x0c,
|
||
[PLL_OFF_USER_CTL] = 0x10,
|
||
[PLL_OFF_CONFIG_CTL] = 0x18,
|
||
[PLL_OFF_TEST_CTL] = 0x1c,
|
||
[PLL_OFF_STATUS] = 0x24,
|
||
},
|
||
[CLK_ALPHA_PLL_TYPE_FABIA] = {
|
||
[PLL_OFF_L_VAL] = 0x04,
|
||
[PLL_OFF_USER_CTL] = 0x0c,
|
||
[PLL_OFF_USER_CTL_U] = 0x10,
|
||
[PLL_OFF_CONFIG_CTL] = 0x14,
|
||
[PLL_OFF_CONFIG_CTL_U] = 0x18,
|
||
[PLL_OFF_TEST_CTL] = 0x1c,
|
||
[PLL_OFF_TEST_CTL_U] = 0x20,
|
||
[PLL_OFF_STATUS] = 0x24,
|
||
[PLL_OFF_OPMODE] = 0x2c,
|
||
[PLL_OFF_FRAC] = 0x38,
|
||
},
|
||
[CLK_ALPHA_PLL_TYPE_TRION] = {
|
||
[PLL_OFF_L_VAL] = 0x04,
|
||
[PLL_OFF_CAL_L_VAL] = 0x08,
|
||
[PLL_OFF_USER_CTL] = 0x0c,
|
||
[PLL_OFF_USER_CTL_U] = 0x10,
|
||
[PLL_OFF_USER_CTL_U1] = 0x14,
|
||
[PLL_OFF_CONFIG_CTL] = 0x18,
|
||
[PLL_OFF_CONFIG_CTL_U] = 0x1c,
|
||
[PLL_OFF_CONFIG_CTL_U1] = 0x20,
|
||
[PLL_OFF_TEST_CTL] = 0x24,
|
||
[PLL_OFF_TEST_CTL_U] = 0x28,
|
||
[PLL_OFF_TEST_CTL_U1] = 0x2c,
|
||
[PLL_OFF_STATUS] = 0x30,
|
||
[PLL_OFF_OPMODE] = 0x38,
|
||
[PLL_OFF_ALPHA_VAL] = 0x40,
|
||
},
|
||
[CLK_ALPHA_PLL_TYPE_AGERA] = {
|
||
[PLL_OFF_L_VAL] = 0x04,
|
||
[PLL_OFF_ALPHA_VAL] = 0x08,
|
||
[PLL_OFF_USER_CTL] = 0x0c,
|
||
[PLL_OFF_CONFIG_CTL] = 0x10,
|
||
[PLL_OFF_CONFIG_CTL_U] = 0x14,
|
||
[PLL_OFF_TEST_CTL] = 0x18,
|
||
[PLL_OFF_TEST_CTL_U] = 0x1c,
|
||
[PLL_OFF_STATUS] = 0x2c,
|
||
},
|
||
[CLK_ALPHA_PLL_TYPE_ZONDA] = {
|
||
[PLL_OFF_L_VAL] = 0x04,
|
||
[PLL_OFF_ALPHA_VAL] = 0x08,
|
||
[PLL_OFF_USER_CTL] = 0x0c,
|
||
[PLL_OFF_CONFIG_CTL] = 0x10,
|
||
[PLL_OFF_CONFIG_CTL_U] = 0x14,
|
||
[PLL_OFF_CONFIG_CTL_U1] = 0x18,
|
||
[PLL_OFF_TEST_CTL] = 0x1c,
|
||
[PLL_OFF_TEST_CTL_U] = 0x20,
|
||
[PLL_OFF_TEST_CTL_U1] = 0x24,
|
||
[PLL_OFF_OPMODE] = 0x28,
|
||
[PLL_OFF_STATUS] = 0x38,
|
||
},
|
||
[CLK_ALPHA_PLL_TYPE_LUCID_EVO] = {
|
||
[PLL_OFF_OPMODE] = 0x04,
|
||
[PLL_OFF_STATUS] = 0x0c,
|
||
[PLL_OFF_L_VAL] = 0x10,
|
||
[PLL_OFF_ALPHA_VAL] = 0x14,
|
||
[PLL_OFF_USER_CTL] = 0x18,
|
||
[PLL_OFF_USER_CTL_U] = 0x1c,
|
||
[PLL_OFF_CONFIG_CTL] = 0x20,
|
||
[PLL_OFF_CONFIG_CTL_U] = 0x24,
|
||
[PLL_OFF_CONFIG_CTL_U1] = 0x28,
|
||
[PLL_OFF_TEST_CTL] = 0x2c,
|
||
[PLL_OFF_TEST_CTL_U] = 0x30,
|
||
[PLL_OFF_TEST_CTL_U1] = 0x34,
|
||
},
|
||
};
|
||
EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
|
||
|
||
/*
|
||
* Even though 40 bits are present, use only 32 for ease of calculation.
|
||
*/
|
||
#define ALPHA_REG_BITWIDTH 40
|
||
#define ALPHA_REG_16BIT_WIDTH 16
|
||
#define ALPHA_BITWIDTH 32U
|
||
#define ALPHA_SHIFT(w) min(w, ALPHA_BITWIDTH)
|
||
|
||
#define PLL_HUAYRA_M_WIDTH 8
|
||
#define PLL_HUAYRA_M_SHIFT 8
|
||
#define PLL_HUAYRA_M_MASK 0xff
|
||
#define PLL_HUAYRA_N_SHIFT 0
|
||
#define PLL_HUAYRA_N_MASK 0xff
|
||
#define PLL_HUAYRA_ALPHA_WIDTH 16
|
||
|
||
#define PLL_STANDBY 0x0
|
||
#define PLL_RUN 0x1
|
||
#define PLL_OUT_MASK 0x7
|
||
#define PLL_RATE_MARGIN 500
|
||
|
||
/* TRION PLL specific settings and offsets */
|
||
#define TRION_PLL_CAL_VAL 0x44
|
||
#define TRION_PCAL_DONE BIT(26)
|
||
|
||
/* LUCID PLL specific settings and offsets */
|
||
#define LUCID_PCAL_DONE BIT(27)
|
||
|
||
/* LUCID 5LPE PLL specific settings and offsets */
|
||
#define LUCID_5LPE_PCAL_DONE BIT(11)
|
||
#define LUCID_5LPE_ALPHA_PLL_ACK_LATCH BIT(13)
|
||
#define LUCID_5LPE_PLL_LATCH_INPUT BIT(14)
|
||
#define LUCID_5LPE_ENABLE_VOTE_RUN BIT(21)
|
||
|
||
/* LUCID EVO PLL specific settings and offsets */
|
||
#define LUCID_EVO_ENABLE_VOTE_RUN BIT(25)
|
||
#define LUCID_EVO_PLL_L_VAL_MASK GENMASK(15, 0)
|
||
|
||
/* ZONDA PLL specific */
|
||
#define ZONDA_PLL_OUT_MASK 0xf
|
||
#define ZONDA_STAY_IN_CFA BIT(16)
|
||
#define ZONDA_PLL_FREQ_LOCK_DET BIT(29)
|
||
|
||
#define pll_alpha_width(p) \
|
||
((PLL_ALPHA_VAL_U(p) - PLL_ALPHA_VAL(p) == 4) ? \
|
||
ALPHA_REG_BITWIDTH : ALPHA_REG_16BIT_WIDTH)
|
||
|
||
#define pll_has_64bit_config(p) ((PLL_CONFIG_CTL_U(p) - PLL_CONFIG_CTL(p)) == 4)
|
||
|
||
#define to_clk_alpha_pll(_hw) container_of(to_clk_regmap(_hw), \
|
||
struct clk_alpha_pll, clkr)
|
||
|
||
#define to_clk_alpha_pll_postdiv(_hw) container_of(to_clk_regmap(_hw), \
|
||
struct clk_alpha_pll_postdiv, clkr)
|
||
|
||
static int wait_for_pll(struct clk_alpha_pll *pll, u32 mask, bool inverse,
|
||
const char *action)
|
||
{
|
||
u32 val;
|
||
int count;
|
||
int ret;
|
||
const char *name = clk_hw_get_name(&pll->clkr.hw);
|
||
|
||
ret = regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
|
||
if (ret)
|
||
return ret;
|
||
|
||
for (count = 200; count > 0; count--) {
|
||
ret = regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
|
||
if (ret)
|
||
return ret;
|
||
if (inverse && !(val & mask))
|
||
return 0;
|
||
else if ((val & mask) == mask)
|
||
return 0;
|
||
|
||
udelay(1);
|
||
}
|
||
|
||
WARN(1, "%s failed to %s!\n", name, action);
|
||
return -ETIMEDOUT;
|
||
}
|
||
|
||
#define wait_for_pll_enable_active(pll) \
|
||
wait_for_pll(pll, PLL_ACTIVE_FLAG, 0, "enable")
|
||
|
||
#define wait_for_pll_enable_lock(pll) \
|
||
wait_for_pll(pll, PLL_LOCK_DET, 0, "enable")
|
||
|
||
#define wait_for_zonda_pll_freq_lock(pll) \
|
||
wait_for_pll(pll, ZONDA_PLL_FREQ_LOCK_DET, 0, "freq enable")
|
||
|
||
#define wait_for_pll_disable(pll) \
|
||
wait_for_pll(pll, PLL_ACTIVE_FLAG, 1, "disable")
|
||
|
||
#define wait_for_pll_offline(pll) \
|
||
wait_for_pll(pll, PLL_OFFLINE_ACK, 0, "offline")
|
||
|
||
#define wait_for_pll_update(pll) \
|
||
wait_for_pll(pll, PLL_UPDATE, 1, "update")
|
||
|
||
#define wait_for_pll_update_ack_set(pll) \
|
||
wait_for_pll(pll, ALPHA_PLL_ACK_LATCH, 0, "update_ack_set")
|
||
|
||
#define wait_for_pll_update_ack_clear(pll) \
|
||
wait_for_pll(pll, ALPHA_PLL_ACK_LATCH, 1, "update_ack_clear")
|
||
|
||
static void clk_alpha_pll_write_config(struct regmap *regmap, unsigned int reg,
|
||
unsigned int val)
|
||
{
|
||
if (val)
|
||
regmap_write(regmap, reg, val);
|
||
}
|
||
|
||
void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
|
||
const struct alpha_pll_config *config)
|
||
{
|
||
u32 val, mask;
|
||
|
||
regmap_write(regmap, PLL_L_VAL(pll), config->l);
|
||
regmap_write(regmap, PLL_ALPHA_VAL(pll), config->alpha);
|
||
regmap_write(regmap, PLL_CONFIG_CTL(pll), config->config_ctl_val);
|
||
|
||
if (pll_has_64bit_config(pll))
|
||
regmap_write(regmap, PLL_CONFIG_CTL_U(pll),
|
||
config->config_ctl_hi_val);
|
||
|
||
if (pll_alpha_width(pll) > 32)
|
||
regmap_write(regmap, PLL_ALPHA_VAL_U(pll), config->alpha_hi);
|
||
|
||
val = config->main_output_mask;
|
||
val |= config->aux_output_mask;
|
||
val |= config->aux2_output_mask;
|
||
val |= config->early_output_mask;
|
||
val |= config->pre_div_val;
|
||
val |= config->post_div_val;
|
||
val |= config->vco_val;
|
||
val |= config->alpha_en_mask;
|
||
val |= config->alpha_mode_mask;
|
||
|
||
mask = config->main_output_mask;
|
||
mask |= config->aux_output_mask;
|
||
mask |= config->aux2_output_mask;
|
||
mask |= config->early_output_mask;
|
||
mask |= config->pre_div_mask;
|
||
mask |= config->post_div_mask;
|
||
mask |= config->vco_mask;
|
||
|
||
regmap_update_bits(regmap, PLL_USER_CTL(pll), mask, val);
|
||
|
||
if (pll->flags & SUPPORTS_FSM_MODE)
|
||
qcom_pll_set_fsm_mode(regmap, PLL_MODE(pll), 6, 0);
|
||
}
|
||
EXPORT_SYMBOL_GPL(clk_alpha_pll_configure);
|
||
|
||
static int clk_alpha_pll_hwfsm_enable(struct clk_hw *hw)
|
||
{
|
||
int ret;
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
u32 val;
|
||
|
||
ret = regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
|
||
if (ret)
|
||
return ret;
|
||
|
||
val |= PLL_FSM_ENA;
|
||
|
||
if (pll->flags & SUPPORTS_OFFLINE_REQ)
|
||
val &= ~PLL_OFFLINE_REQ;
|
||
|
||
ret = regmap_write(pll->clkr.regmap, PLL_MODE(pll), val);
|
||
if (ret)
|
||
return ret;
|
||
|
||
/* Make sure enable request goes through before waiting for update */
|
||
mb();
|
||
|
||
return wait_for_pll_enable_active(pll);
|
||
}
|
||
|
||
static void clk_alpha_pll_hwfsm_disable(struct clk_hw *hw)
|
||
{
|
||
int ret;
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
u32 val;
|
||
|
||
ret = regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
|
||
if (ret)
|
||
return;
|
||
|
||
if (pll->flags & SUPPORTS_OFFLINE_REQ) {
|
||
ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll),
|
||
PLL_OFFLINE_REQ, PLL_OFFLINE_REQ);
|
||
if (ret)
|
||
return;
|
||
|
||
ret = wait_for_pll_offline(pll);
|
||
if (ret)
|
||
return;
|
||
}
|
||
|
||
/* Disable hwfsm */
|
||
ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll),
|
||
PLL_FSM_ENA, 0);
|
||
if (ret)
|
||
return;
|
||
|
||
wait_for_pll_disable(pll);
|
||
}
|
||
|
||
static int pll_is_enabled(struct clk_hw *hw, u32 mask)
|
||
{
|
||
int ret;
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
u32 val;
|
||
|
||
ret = regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
|
||
if (ret)
|
||
return ret;
|
||
|
||
return !!(val & mask);
|
||
}
|
||
|
||
static int clk_alpha_pll_hwfsm_is_enabled(struct clk_hw *hw)
|
||
{
|
||
return pll_is_enabled(hw, PLL_ACTIVE_FLAG);
|
||
}
|
||
|
||
static int clk_alpha_pll_is_enabled(struct clk_hw *hw)
|
||
{
|
||
return pll_is_enabled(hw, PLL_LOCK_DET);
|
||
}
|
||
|
||
static int clk_alpha_pll_enable(struct clk_hw *hw)
|
||
{
|
||
int ret;
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
u32 val, mask;
|
||
|
||
mask = PLL_OUTCTRL | PLL_RESET_N | PLL_BYPASSNL;
|
||
ret = regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
|
||
if (ret)
|
||
return ret;
|
||
|
||
/* If in FSM mode, just vote for it */
|
||
if (val & PLL_VOTE_FSM_ENA) {
|
||
ret = clk_enable_regmap(hw);
|
||
if (ret)
|
||
return ret;
|
||
return wait_for_pll_enable_active(pll);
|
||
}
|
||
|
||
/* Skip if already enabled */
|
||
if ((val & mask) == mask)
|
||
return 0;
|
||
|
||
ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll),
|
||
PLL_BYPASSNL, PLL_BYPASSNL);
|
||
if (ret)
|
||
return ret;
|
||
|
||
/*
|
||
* H/W requires a 5us delay between disabling the bypass and
|
||
* de-asserting the reset.
|
||
*/
|
||
mb();
|
||
udelay(5);
|
||
|
||
ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll),
|
||
PLL_RESET_N, PLL_RESET_N);
|
||
if (ret)
|
||
return ret;
|
||
|
||
ret = wait_for_pll_enable_lock(pll);
|
||
if (ret)
|
||
return ret;
|
||
|
||
ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll),
|
||
PLL_OUTCTRL, PLL_OUTCTRL);
|
||
|
||
/* Ensure that the write above goes through before returning. */
|
||
mb();
|
||
return ret;
|
||
}
|
||
|
||
static void clk_alpha_pll_disable(struct clk_hw *hw)
|
||
{
|
||
int ret;
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
u32 val, mask;
|
||
|
||
ret = regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
|
||
if (ret)
|
||
return;
|
||
|
||
/* If in FSM mode, just unvote it */
|
||
if (val & PLL_VOTE_FSM_ENA) {
|
||
clk_disable_regmap(hw);
|
||
return;
|
||
}
|
||
|
||
mask = PLL_OUTCTRL;
|
||
regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), mask, 0);
|
||
|
||
/* Delay of 2 output clock ticks required until output is disabled */
|
||
mb();
|
||
udelay(1);
|
||
|
||
mask = PLL_RESET_N | PLL_BYPASSNL;
|
||
regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), mask, 0);
|
||
}
|
||
|
||
static unsigned long
|
||
alpha_pll_calc_rate(u64 prate, u32 l, u32 a, u32 alpha_width)
|
||
{
|
||
return (prate * l) + ((prate * a) >> ALPHA_SHIFT(alpha_width));
|
||
}
|
||
|
||
static unsigned long
|
||
alpha_pll_round_rate(unsigned long rate, unsigned long prate, u32 *l, u64 *a,
|
||
u32 alpha_width)
|
||
{
|
||
u64 remainder;
|
||
u64 quotient;
|
||
|
||
quotient = rate;
|
||
remainder = do_div(quotient, prate);
|
||
*l = quotient;
|
||
|
||
if (!remainder) {
|
||
*a = 0;
|
||
return rate;
|
||
}
|
||
|
||
/* Upper ALPHA_BITWIDTH bits of Alpha */
|
||
quotient = remainder << ALPHA_SHIFT(alpha_width);
|
||
|
||
remainder = do_div(quotient, prate);
|
||
|
||
if (remainder)
|
||
quotient++;
|
||
|
||
*a = quotient;
|
||
return alpha_pll_calc_rate(prate, *l, *a, alpha_width);
|
||
}
|
||
|
||
static const struct pll_vco *
|
||
alpha_pll_find_vco(const struct clk_alpha_pll *pll, unsigned long rate)
|
||
{
|
||
const struct pll_vco *v = pll->vco_table;
|
||
const struct pll_vco *end = v + pll->num_vco;
|
||
|
||
for (; v < end; v++)
|
||
if (rate >= v->min_freq && rate <= v->max_freq)
|
||
return v;
|
||
|
||
return NULL;
|
||
}
|
||
|
||
static unsigned long
|
||
clk_alpha_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
|
||
{
|
||
u32 l, low, high, ctl;
|
||
u64 a = 0, prate = parent_rate;
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
u32 alpha_width = pll_alpha_width(pll);
|
||
|
||
regmap_read(pll->clkr.regmap, PLL_L_VAL(pll), &l);
|
||
|
||
regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &ctl);
|
||
if (ctl & PLL_ALPHA_EN) {
|
||
regmap_read(pll->clkr.regmap, PLL_ALPHA_VAL(pll), &low);
|
||
if (alpha_width > 32) {
|
||
regmap_read(pll->clkr.regmap, PLL_ALPHA_VAL_U(pll),
|
||
&high);
|
||
a = (u64)high << 32 | low;
|
||
} else {
|
||
a = low & GENMASK(alpha_width - 1, 0);
|
||
}
|
||
|
||
if (alpha_width > ALPHA_BITWIDTH)
|
||
a >>= alpha_width - ALPHA_BITWIDTH;
|
||
}
|
||
|
||
return alpha_pll_calc_rate(prate, l, a, alpha_width);
|
||
}
|
||
|
||
|
||
static int __clk_alpha_pll_update_latch(struct clk_alpha_pll *pll)
|
||
{
|
||
int ret;
|
||
u32 mode;
|
||
|
||
regmap_read(pll->clkr.regmap, PLL_MODE(pll), &mode);
|
||
|
||
/* Latch the input to the PLL */
|
||
regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_UPDATE,
|
||
PLL_UPDATE);
|
||
|
||
/* Wait for 2 reference cycle before checking ACK bit */
|
||
udelay(1);
|
||
|
||
/*
|
||
* PLL will latch the new L, Alpha and freq control word.
|
||
* PLL will respond by raising PLL_ACK_LATCH output when new programming
|
||
* has been latched in and PLL is being updated. When
|
||
* UPDATE_LOGIC_BYPASS bit is not set, PLL_UPDATE will be cleared
|
||
* automatically by hardware when PLL_ACK_LATCH is asserted by PLL.
|
||
*/
|
||
if (mode & PLL_UPDATE_BYPASS) {
|
||
ret = wait_for_pll_update_ack_set(pll);
|
||
if (ret)
|
||
return ret;
|
||
|
||
regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_UPDATE, 0);
|
||
} else {
|
||
ret = wait_for_pll_update(pll);
|
||
if (ret)
|
||
return ret;
|
||
}
|
||
|
||
ret = wait_for_pll_update_ack_clear(pll);
|
||
if (ret)
|
||
return ret;
|
||
|
||
/* Wait for PLL output to stabilize */
|
||
udelay(10);
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int clk_alpha_pll_update_latch(struct clk_alpha_pll *pll,
|
||
int (*is_enabled)(struct clk_hw *))
|
||
{
|
||
if (!is_enabled(&pll->clkr.hw) ||
|
||
!(pll->flags & SUPPORTS_DYNAMIC_UPDATE))
|
||
return 0;
|
||
|
||
return __clk_alpha_pll_update_latch(pll);
|
||
}
|
||
|
||
static int __clk_alpha_pll_set_rate(struct clk_hw *hw, unsigned long rate,
|
||
unsigned long prate,
|
||
int (*is_enabled)(struct clk_hw *))
|
||
{
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
const struct pll_vco *vco;
|
||
u32 l, alpha_width = pll_alpha_width(pll);
|
||
u64 a;
|
||
|
||
rate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);
|
||
vco = alpha_pll_find_vco(pll, rate);
|
||
if (pll->vco_table && !vco) {
|
||
pr_err("%s: alpha pll not in a valid vco range\n",
|
||
clk_hw_get_name(hw));
|
||
return -EINVAL;
|
||
}
|
||
|
||
regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
|
||
|
||
if (alpha_width > ALPHA_BITWIDTH)
|
||
a <<= alpha_width - ALPHA_BITWIDTH;
|
||
|
||
if (alpha_width > 32)
|
||
regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL_U(pll), a >> 32);
|
||
|
||
regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
|
||
|
||
if (vco) {
|
||
regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll),
|
||
PLL_VCO_MASK << PLL_VCO_SHIFT,
|
||
vco->val << PLL_VCO_SHIFT);
|
||
}
|
||
|
||
regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll),
|
||
PLL_ALPHA_EN, PLL_ALPHA_EN);
|
||
|
||
return clk_alpha_pll_update_latch(pll, is_enabled);
|
||
}
|
||
|
||
static int clk_alpha_pll_set_rate(struct clk_hw *hw, unsigned long rate,
|
||
unsigned long prate)
|
||
{
|
||
return __clk_alpha_pll_set_rate(hw, rate, prate,
|
||
clk_alpha_pll_is_enabled);
|
||
}
|
||
|
||
static int clk_alpha_pll_hwfsm_set_rate(struct clk_hw *hw, unsigned long rate,
|
||
unsigned long prate)
|
||
{
|
||
return __clk_alpha_pll_set_rate(hw, rate, prate,
|
||
clk_alpha_pll_hwfsm_is_enabled);
|
||
}
|
||
|
||
static long clk_alpha_pll_round_rate(struct clk_hw *hw, unsigned long rate,
|
||
unsigned long *prate)
|
||
{
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
u32 l, alpha_width = pll_alpha_width(pll);
|
||
u64 a;
|
||
unsigned long min_freq, max_freq;
|
||
|
||
rate = alpha_pll_round_rate(rate, *prate, &l, &a, alpha_width);
|
||
if (!pll->vco_table || alpha_pll_find_vco(pll, rate))
|
||
return rate;
|
||
|
||
min_freq = pll->vco_table[0].min_freq;
|
||
max_freq = pll->vco_table[pll->num_vco - 1].max_freq;
|
||
|
||
return clamp(rate, min_freq, max_freq);
|
||
}
|
||
|
||
static unsigned long
|
||
alpha_huayra_pll_calc_rate(u64 prate, u32 l, u32 a)
|
||
{
|
||
/*
|
||
* a contains 16 bit alpha_val in two’s complement number in the range
|
||
* of [-0.5, 0.5).
|
||
*/
|
||
if (a >= BIT(PLL_HUAYRA_ALPHA_WIDTH - 1))
|
||
l -= 1;
|
||
|
||
return (prate * l) + (prate * a >> PLL_HUAYRA_ALPHA_WIDTH);
|
||
}
|
||
|
||
static unsigned long
|
||
alpha_huayra_pll_round_rate(unsigned long rate, unsigned long prate,
|
||
u32 *l, u32 *a)
|
||
{
|
||
u64 remainder;
|
||
u64 quotient;
|
||
|
||
quotient = rate;
|
||
remainder = do_div(quotient, prate);
|
||
*l = quotient;
|
||
|
||
if (!remainder) {
|
||
*a = 0;
|
||
return rate;
|
||
}
|
||
|
||
quotient = remainder << PLL_HUAYRA_ALPHA_WIDTH;
|
||
remainder = do_div(quotient, prate);
|
||
|
||
if (remainder)
|
||
quotient++;
|
||
|
||
/*
|
||
* alpha_val should be in two’s complement number in the range
|
||
* of [-0.5, 0.5) so if quotient >= 0.5 then increment the l value
|
||
* since alpha value will be subtracted in this case.
|
||
*/
|
||
if (quotient >= BIT(PLL_HUAYRA_ALPHA_WIDTH - 1))
|
||
*l += 1;
|
||
|
||
*a = quotient;
|
||
return alpha_huayra_pll_calc_rate(prate, *l, *a);
|
||
}
|
||
|
||
static unsigned long
|
||
alpha_pll_huayra_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
|
||
{
|
||
u64 rate = parent_rate, tmp;
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
u32 l, alpha = 0, ctl, alpha_m, alpha_n;
|
||
|
||
regmap_read(pll->clkr.regmap, PLL_L_VAL(pll), &l);
|
||
regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &ctl);
|
||
|
||
if (ctl & PLL_ALPHA_EN) {
|
||
regmap_read(pll->clkr.regmap, PLL_ALPHA_VAL(pll), &alpha);
|
||
/*
|
||
* Depending upon alpha_mode, it can be treated as M/N value or
|
||
* as a two’s complement number. When alpha_mode=1,
|
||
* pll_alpha_val<15:8>=M and pll_apla_val<7:0>=N
|
||
*
|
||
* Fout=FIN*(L+(M/N))
|
||
*
|
||
* M is a signed number (-128 to 127) and N is unsigned
|
||
* (0 to 255). M/N has to be within +/-0.5.
|
||
*
|
||
* When alpha_mode=0, it is a two’s complement number in the
|
||
* range [-0.5, 0.5).
|
||
*
|
||
* Fout=FIN*(L+(alpha_val)/2^16)
|
||
*
|
||
* where alpha_val is two’s complement number.
|
||
*/
|
||
if (!(ctl & PLL_ALPHA_MODE))
|
||
return alpha_huayra_pll_calc_rate(rate, l, alpha);
|
||
|
||
alpha_m = alpha >> PLL_HUAYRA_M_SHIFT & PLL_HUAYRA_M_MASK;
|
||
alpha_n = alpha >> PLL_HUAYRA_N_SHIFT & PLL_HUAYRA_N_MASK;
|
||
|
||
rate *= l;
|
||
tmp = parent_rate;
|
||
if (alpha_m >= BIT(PLL_HUAYRA_M_WIDTH - 1)) {
|
||
alpha_m = BIT(PLL_HUAYRA_M_WIDTH) - alpha_m;
|
||
tmp *= alpha_m;
|
||
do_div(tmp, alpha_n);
|
||
rate -= tmp;
|
||
} else {
|
||
tmp *= alpha_m;
|
||
do_div(tmp, alpha_n);
|
||
rate += tmp;
|
||
}
|
||
|
||
return rate;
|
||
}
|
||
|
||
return alpha_huayra_pll_calc_rate(rate, l, alpha);
|
||
}
|
||
|
||
static int alpha_pll_huayra_set_rate(struct clk_hw *hw, unsigned long rate,
|
||
unsigned long prate)
|
||
{
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
u32 l, a, ctl, cur_alpha = 0;
|
||
|
||
rate = alpha_huayra_pll_round_rate(rate, prate, &l, &a);
|
||
|
||
regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &ctl);
|
||
|
||
if (ctl & PLL_ALPHA_EN)
|
||
regmap_read(pll->clkr.regmap, PLL_ALPHA_VAL(pll), &cur_alpha);
|
||
|
||
/*
|
||
* Huayra PLL supports PLL dynamic programming. User can change L_VAL,
|
||
* without having to go through the power on sequence.
|
||
*/
|
||
if (clk_alpha_pll_is_enabled(hw)) {
|
||
if (cur_alpha != a) {
|
||
pr_err("%s: clock needs to be gated\n",
|
||
clk_hw_get_name(hw));
|
||
return -EBUSY;
|
||
}
|
||
|
||
regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
|
||
/* Ensure that the write above goes to detect L val change. */
|
||
mb();
|
||
return wait_for_pll_enable_lock(pll);
|
||
}
|
||
|
||
regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
|
||
regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
|
||
|
||
if (a == 0)
|
||
regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll),
|
||
PLL_ALPHA_EN, 0x0);
|
||
else
|
||
regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll),
|
||
PLL_ALPHA_EN | PLL_ALPHA_MODE, PLL_ALPHA_EN);
|
||
|
||
return 0;
|
||
}
|
||
|
||
static long alpha_pll_huayra_round_rate(struct clk_hw *hw, unsigned long rate,
|
||
unsigned long *prate)
|
||
{
|
||
u32 l, a;
|
||
|
||
return alpha_huayra_pll_round_rate(rate, *prate, &l, &a);
|
||
}
|
||
|
||
static int trion_pll_is_enabled(struct clk_alpha_pll *pll,
|
||
struct regmap *regmap)
|
||
{
|
||
u32 mode_val, opmode_val;
|
||
int ret;
|
||
|
||
ret = regmap_read(regmap, PLL_MODE(pll), &mode_val);
|
||
ret |= regmap_read(regmap, PLL_OPMODE(pll), &opmode_val);
|
||
if (ret)
|
||
return 0;
|
||
|
||
return ((opmode_val & PLL_RUN) && (mode_val & PLL_OUTCTRL));
|
||
}
|
||
|
||
static int clk_trion_pll_is_enabled(struct clk_hw *hw)
|
||
{
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
|
||
return trion_pll_is_enabled(pll, pll->clkr.regmap);
|
||
}
|
||
|
||
static int clk_trion_pll_enable(struct clk_hw *hw)
|
||
{
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
struct regmap *regmap = pll->clkr.regmap;
|
||
u32 val;
|
||
int ret;
|
||
|
||
ret = regmap_read(regmap, PLL_MODE(pll), &val);
|
||
if (ret)
|
||
return ret;
|
||
|
||
/* If in FSM mode, just vote for it */
|
||
if (val & PLL_VOTE_FSM_ENA) {
|
||
ret = clk_enable_regmap(hw);
|
||
if (ret)
|
||
return ret;
|
||
return wait_for_pll_enable_active(pll);
|
||
}
|
||
|
||
/* Set operation mode to RUN */
|
||
regmap_write(regmap, PLL_OPMODE(pll), PLL_RUN);
|
||
|
||
ret = wait_for_pll_enable_lock(pll);
|
||
if (ret)
|
||
return ret;
|
||
|
||
/* Enable the PLL outputs */
|
||
ret = regmap_update_bits(regmap, PLL_USER_CTL(pll),
|
||
PLL_OUT_MASK, PLL_OUT_MASK);
|
||
if (ret)
|
||
return ret;
|
||
|
||
/* Enable the global PLL outputs */
|
||
return regmap_update_bits(regmap, PLL_MODE(pll),
|
||
PLL_OUTCTRL, PLL_OUTCTRL);
|
||
}
|
||
|
||
static void clk_trion_pll_disable(struct clk_hw *hw)
|
||
{
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
struct regmap *regmap = pll->clkr.regmap;
|
||
u32 val;
|
||
int ret;
|
||
|
||
ret = regmap_read(regmap, PLL_MODE(pll), &val);
|
||
if (ret)
|
||
return;
|
||
|
||
/* If in FSM mode, just unvote it */
|
||
if (val & PLL_VOTE_FSM_ENA) {
|
||
clk_disable_regmap(hw);
|
||
return;
|
||
}
|
||
|
||
/* Disable the global PLL output */
|
||
ret = regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
|
||
if (ret)
|
||
return;
|
||
|
||
/* Disable the PLL outputs */
|
||
ret = regmap_update_bits(regmap, PLL_USER_CTL(pll),
|
||
PLL_OUT_MASK, 0);
|
||
if (ret)
|
||
return;
|
||
|
||
/* Place the PLL mode in STANDBY */
|
||
regmap_write(regmap, PLL_OPMODE(pll), PLL_STANDBY);
|
||
regmap_update_bits(regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
|
||
}
|
||
|
||
static unsigned long
|
||
clk_trion_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
|
||
{
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
u32 l, frac, alpha_width = pll_alpha_width(pll);
|
||
|
||
regmap_read(pll->clkr.regmap, PLL_L_VAL(pll), &l);
|
||
regmap_read(pll->clkr.regmap, PLL_ALPHA_VAL(pll), &frac);
|
||
|
||
return alpha_pll_calc_rate(parent_rate, l, frac, alpha_width);
|
||
}
|
||
|
||
const struct clk_ops clk_alpha_pll_fixed_ops = {
|
||
.enable = clk_alpha_pll_enable,
|
||
.disable = clk_alpha_pll_disable,
|
||
.is_enabled = clk_alpha_pll_is_enabled,
|
||
.recalc_rate = clk_alpha_pll_recalc_rate,
|
||
};
|
||
EXPORT_SYMBOL_GPL(clk_alpha_pll_fixed_ops);
|
||
|
||
const struct clk_ops clk_alpha_pll_ops = {
|
||
.enable = clk_alpha_pll_enable,
|
||
.disable = clk_alpha_pll_disable,
|
||
.is_enabled = clk_alpha_pll_is_enabled,
|
||
.recalc_rate = clk_alpha_pll_recalc_rate,
|
||
.round_rate = clk_alpha_pll_round_rate,
|
||
.set_rate = clk_alpha_pll_set_rate,
|
||
};
|
||
EXPORT_SYMBOL_GPL(clk_alpha_pll_ops);
|
||
|
||
const struct clk_ops clk_alpha_pll_huayra_ops = {
|
||
.enable = clk_alpha_pll_enable,
|
||
.disable = clk_alpha_pll_disable,
|
||
.is_enabled = clk_alpha_pll_is_enabled,
|
||
.recalc_rate = alpha_pll_huayra_recalc_rate,
|
||
.round_rate = alpha_pll_huayra_round_rate,
|
||
.set_rate = alpha_pll_huayra_set_rate,
|
||
};
|
||
EXPORT_SYMBOL_GPL(clk_alpha_pll_huayra_ops);
|
||
|
||
const struct clk_ops clk_alpha_pll_hwfsm_ops = {
|
||
.enable = clk_alpha_pll_hwfsm_enable,
|
||
.disable = clk_alpha_pll_hwfsm_disable,
|
||
.is_enabled = clk_alpha_pll_hwfsm_is_enabled,
|
||
.recalc_rate = clk_alpha_pll_recalc_rate,
|
||
.round_rate = clk_alpha_pll_round_rate,
|
||
.set_rate = clk_alpha_pll_hwfsm_set_rate,
|
||
};
|
||
EXPORT_SYMBOL_GPL(clk_alpha_pll_hwfsm_ops);
|
||
|
||
const struct clk_ops clk_alpha_pll_fixed_trion_ops = {
|
||
.enable = clk_trion_pll_enable,
|
||
.disable = clk_trion_pll_disable,
|
||
.is_enabled = clk_trion_pll_is_enabled,
|
||
.recalc_rate = clk_trion_pll_recalc_rate,
|
||
.round_rate = clk_alpha_pll_round_rate,
|
||
};
|
||
EXPORT_SYMBOL_GPL(clk_alpha_pll_fixed_trion_ops);
|
||
|
||
static unsigned long
|
||
clk_alpha_pll_postdiv_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
|
||
{
|
||
struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
|
||
u32 ctl;
|
||
|
||
regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &ctl);
|
||
|
||
ctl >>= PLL_POST_DIV_SHIFT;
|
||
ctl &= PLL_POST_DIV_MASK(pll);
|
||
|
||
return parent_rate >> fls(ctl);
|
||
}
|
||
|
||
static const struct clk_div_table clk_alpha_div_table[] = {
|
||
{ 0x0, 1 },
|
||
{ 0x1, 2 },
|
||
{ 0x3, 4 },
|
||
{ 0x7, 8 },
|
||
{ 0xf, 16 },
|
||
{ }
|
||
};
|
||
|
||
static const struct clk_div_table clk_alpha_2bit_div_table[] = {
|
||
{ 0x0, 1 },
|
||
{ 0x1, 2 },
|
||
{ 0x3, 4 },
|
||
{ }
|
||
};
|
||
|
||
static long
|
||
clk_alpha_pll_postdiv_round_rate(struct clk_hw *hw, unsigned long rate,
|
||
unsigned long *prate)
|
||
{
|
||
struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
|
||
const struct clk_div_table *table;
|
||
|
||
if (pll->width == 2)
|
||
table = clk_alpha_2bit_div_table;
|
||
else
|
||
table = clk_alpha_div_table;
|
||
|
||
return divider_round_rate(hw, rate, prate, table,
|
||
pll->width, CLK_DIVIDER_POWER_OF_TWO);
|
||
}
|
||
|
||
static long
|
||
clk_alpha_pll_postdiv_round_ro_rate(struct clk_hw *hw, unsigned long rate,
|
||
unsigned long *prate)
|
||
{
|
||
struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
|
||
u32 ctl, div;
|
||
|
||
regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &ctl);
|
||
|
||
ctl >>= PLL_POST_DIV_SHIFT;
|
||
ctl &= BIT(pll->width) - 1;
|
||
div = 1 << fls(ctl);
|
||
|
||
if (clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)
|
||
*prate = clk_hw_round_rate(clk_hw_get_parent(hw), div * rate);
|
||
|
||
return DIV_ROUND_UP_ULL((u64)*prate, div);
|
||
}
|
||
|
||
static int clk_alpha_pll_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
|
||
unsigned long parent_rate)
|
||
{
|
||
struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
|
||
int div;
|
||
|
||
/* 16 -> 0xf, 8 -> 0x7, 4 -> 0x3, 2 -> 0x1, 1 -> 0x0 */
|
||
div = DIV_ROUND_UP_ULL(parent_rate, rate) - 1;
|
||
|
||
return regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll),
|
||
PLL_POST_DIV_MASK(pll) << PLL_POST_DIV_SHIFT,
|
||
div << PLL_POST_DIV_SHIFT);
|
||
}
|
||
|
||
const struct clk_ops clk_alpha_pll_postdiv_ops = {
|
||
.recalc_rate = clk_alpha_pll_postdiv_recalc_rate,
|
||
.round_rate = clk_alpha_pll_postdiv_round_rate,
|
||
.set_rate = clk_alpha_pll_postdiv_set_rate,
|
||
};
|
||
EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_ops);
|
||
|
||
const struct clk_ops clk_alpha_pll_postdiv_ro_ops = {
|
||
.round_rate = clk_alpha_pll_postdiv_round_ro_rate,
|
||
.recalc_rate = clk_alpha_pll_postdiv_recalc_rate,
|
||
};
|
||
EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_ro_ops);
|
||
|
||
void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
|
||
const struct alpha_pll_config *config)
|
||
{
|
||
u32 val, mask;
|
||
|
||
clk_alpha_pll_write_config(regmap, PLL_L_VAL(pll), config->l);
|
||
clk_alpha_pll_write_config(regmap, PLL_FRAC(pll), config->alpha);
|
||
clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL(pll),
|
||
config->config_ctl_val);
|
||
clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL_U(pll),
|
||
config->config_ctl_hi_val);
|
||
clk_alpha_pll_write_config(regmap, PLL_USER_CTL(pll),
|
||
config->user_ctl_val);
|
||
clk_alpha_pll_write_config(regmap, PLL_USER_CTL_U(pll),
|
||
config->user_ctl_hi_val);
|
||
clk_alpha_pll_write_config(regmap, PLL_TEST_CTL(pll),
|
||
config->test_ctl_val);
|
||
clk_alpha_pll_write_config(regmap, PLL_TEST_CTL_U(pll),
|
||
config->test_ctl_hi_val);
|
||
|
||
if (config->post_div_mask) {
|
||
mask = config->post_div_mask;
|
||
val = config->post_div_val;
|
||
regmap_update_bits(regmap, PLL_USER_CTL(pll), mask, val);
|
||
}
|
||
|
||
regmap_update_bits(regmap, PLL_MODE(pll), PLL_UPDATE_BYPASS,
|
||
PLL_UPDATE_BYPASS);
|
||
|
||
regmap_update_bits(regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
|
||
}
|
||
EXPORT_SYMBOL_GPL(clk_fabia_pll_configure);
|
||
|
||
static int alpha_pll_fabia_enable(struct clk_hw *hw)
|
||
{
|
||
int ret;
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
u32 val, opmode_val;
|
||
struct regmap *regmap = pll->clkr.regmap;
|
||
|
||
ret = regmap_read(regmap, PLL_MODE(pll), &val);
|
||
if (ret)
|
||
return ret;
|
||
|
||
/* If in FSM mode, just vote for it */
|
||
if (val & PLL_VOTE_FSM_ENA) {
|
||
ret = clk_enable_regmap(hw);
|
||
if (ret)
|
||
return ret;
|
||
return wait_for_pll_enable_active(pll);
|
||
}
|
||
|
||
ret = regmap_read(regmap, PLL_OPMODE(pll), &opmode_val);
|
||
if (ret)
|
||
return ret;
|
||
|
||
/* Skip If PLL is already running */
|
||
if ((opmode_val & PLL_RUN) && (val & PLL_OUTCTRL))
|
||
return 0;
|
||
|
||
ret = regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
|
||
if (ret)
|
||
return ret;
|
||
|
||
ret = regmap_write(regmap, PLL_OPMODE(pll), PLL_STANDBY);
|
||
if (ret)
|
||
return ret;
|
||
|
||
ret = regmap_update_bits(regmap, PLL_MODE(pll), PLL_RESET_N,
|
||
PLL_RESET_N);
|
||
if (ret)
|
||
return ret;
|
||
|
||
ret = regmap_write(regmap, PLL_OPMODE(pll), PLL_RUN);
|
||
if (ret)
|
||
return ret;
|
||
|
||
ret = wait_for_pll_enable_lock(pll);
|
||
if (ret)
|
||
return ret;
|
||
|
||
ret = regmap_update_bits(regmap, PLL_USER_CTL(pll),
|
||
PLL_OUT_MASK, PLL_OUT_MASK);
|
||
if (ret)
|
||
return ret;
|
||
|
||
return regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL,
|
||
PLL_OUTCTRL);
|
||
}
|
||
|
||
static void alpha_pll_fabia_disable(struct clk_hw *hw)
|
||
{
|
||
int ret;
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
u32 val;
|
||
struct regmap *regmap = pll->clkr.regmap;
|
||
|
||
ret = regmap_read(regmap, PLL_MODE(pll), &val);
|
||
if (ret)
|
||
return;
|
||
|
||
/* If in FSM mode, just unvote it */
|
||
if (val & PLL_FSM_ENA) {
|
||
clk_disable_regmap(hw);
|
||
return;
|
||
}
|
||
|
||
ret = regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
|
||
if (ret)
|
||
return;
|
||
|
||
/* Disable main outputs */
|
||
ret = regmap_update_bits(regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, 0);
|
||
if (ret)
|
||
return;
|
||
|
||
/* Place the PLL in STANDBY */
|
||
regmap_write(regmap, PLL_OPMODE(pll), PLL_STANDBY);
|
||
}
|
||
|
||
static unsigned long alpha_pll_fabia_recalc_rate(struct clk_hw *hw,
|
||
unsigned long parent_rate)
|
||
{
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
u32 l, frac, alpha_width = pll_alpha_width(pll);
|
||
|
||
regmap_read(pll->clkr.regmap, PLL_L_VAL(pll), &l);
|
||
regmap_read(pll->clkr.regmap, PLL_FRAC(pll), &frac);
|
||
|
||
return alpha_pll_calc_rate(parent_rate, l, frac, alpha_width);
|
||
}
|
||
|
||
/*
|
||
* Due to limited number of bits for fractional rate programming, the
|
||
* rounded up rate could be marginally higher than the requested rate.
|
||
*/
|
||
static int alpha_pll_check_rate_margin(struct clk_hw *hw,
|
||
unsigned long rrate, unsigned long rate)
|
||
{
|
||
unsigned long rate_margin = rate + PLL_RATE_MARGIN;
|
||
|
||
if (rrate > rate_margin || rrate < rate) {
|
||
pr_err("%s: Rounded rate %lu not within range [%lu, %lu)\n",
|
||
clk_hw_get_name(hw), rrate, rate, rate_margin);
|
||
return -EINVAL;
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int alpha_pll_fabia_set_rate(struct clk_hw *hw, unsigned long rate,
|
||
unsigned long prate)
|
||
{
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
u32 l, alpha_width = pll_alpha_width(pll);
|
||
unsigned long rrate;
|
||
int ret;
|
||
u64 a;
|
||
|
||
rrate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);
|
||
|
||
ret = alpha_pll_check_rate_margin(hw, rrate, rate);
|
||
if (ret < 0)
|
||
return ret;
|
||
|
||
regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
|
||
regmap_write(pll->clkr.regmap, PLL_FRAC(pll), a);
|
||
|
||
return __clk_alpha_pll_update_latch(pll);
|
||
}
|
||
|
||
static int alpha_pll_fabia_prepare(struct clk_hw *hw)
|
||
{
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
const struct pll_vco *vco;
|
||
struct clk_hw *parent_hw;
|
||
unsigned long cal_freq, rrate;
|
||
u32 cal_l, val, alpha_width = pll_alpha_width(pll);
|
||
const char *name = clk_hw_get_name(hw);
|
||
u64 a;
|
||
int ret;
|
||
|
||
/* Check if calibration needs to be done i.e. PLL is in reset */
|
||
ret = regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
|
||
if (ret)
|
||
return ret;
|
||
|
||
/* Return early if calibration is not needed. */
|
||
if (val & PLL_RESET_N)
|
||
return 0;
|
||
|
||
vco = alpha_pll_find_vco(pll, clk_hw_get_rate(hw));
|
||
if (!vco) {
|
||
pr_err("%s: alpha pll not in a valid vco range\n", name);
|
||
return -EINVAL;
|
||
}
|
||
|
||
cal_freq = DIV_ROUND_CLOSEST((pll->vco_table[0].min_freq +
|
||
pll->vco_table[0].max_freq) * 54, 100);
|
||
|
||
parent_hw = clk_hw_get_parent(hw);
|
||
if (!parent_hw)
|
||
return -EINVAL;
|
||
|
||
rrate = alpha_pll_round_rate(cal_freq, clk_hw_get_rate(parent_hw),
|
||
&cal_l, &a, alpha_width);
|
||
|
||
ret = alpha_pll_check_rate_margin(hw, rrate, cal_freq);
|
||
if (ret < 0)
|
||
return ret;
|
||
|
||
/* Setup PLL for calibration frequency */
|
||
regmap_write(pll->clkr.regmap, PLL_CAL_L_VAL(pll), cal_l);
|
||
|
||
/* Bringup the PLL at calibration frequency */
|
||
ret = clk_alpha_pll_enable(hw);
|
||
if (ret) {
|
||
pr_err("%s: alpha pll calibration failed\n", name);
|
||
return ret;
|
||
}
|
||
|
||
clk_alpha_pll_disable(hw);
|
||
|
||
return 0;
|
||
}
|
||
|
||
const struct clk_ops clk_alpha_pll_fabia_ops = {
|
||
.prepare = alpha_pll_fabia_prepare,
|
||
.enable = alpha_pll_fabia_enable,
|
||
.disable = alpha_pll_fabia_disable,
|
||
.is_enabled = clk_alpha_pll_is_enabled,
|
||
.set_rate = alpha_pll_fabia_set_rate,
|
||
.recalc_rate = alpha_pll_fabia_recalc_rate,
|
||
.round_rate = clk_alpha_pll_round_rate,
|
||
};
|
||
EXPORT_SYMBOL_GPL(clk_alpha_pll_fabia_ops);
|
||
|
||
const struct clk_ops clk_alpha_pll_fixed_fabia_ops = {
|
||
.enable = alpha_pll_fabia_enable,
|
||
.disable = alpha_pll_fabia_disable,
|
||
.is_enabled = clk_alpha_pll_is_enabled,
|
||
.recalc_rate = alpha_pll_fabia_recalc_rate,
|
||
.round_rate = clk_alpha_pll_round_rate,
|
||
};
|
||
EXPORT_SYMBOL_GPL(clk_alpha_pll_fixed_fabia_ops);
|
||
|
||
static unsigned long clk_alpha_pll_postdiv_fabia_recalc_rate(struct clk_hw *hw,
|
||
unsigned long parent_rate)
|
||
{
|
||
struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
|
||
u32 i, div = 1, val;
|
||
int ret;
|
||
|
||
ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
|
||
if (ret)
|
||
return ret;
|
||
|
||
val >>= pll->post_div_shift;
|
||
val &= BIT(pll->width) - 1;
|
||
|
||
for (i = 0; i < pll->num_post_div; i++) {
|
||
if (pll->post_div_table[i].val == val) {
|
||
div = pll->post_div_table[i].div;
|
||
break;
|
||
}
|
||
}
|
||
|
||
return (parent_rate / div);
|
||
}
|
||
|
||
static unsigned long
|
||
clk_trion_pll_postdiv_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
|
||
{
|
||
struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
|
||
struct regmap *regmap = pll->clkr.regmap;
|
||
u32 i, div = 1, val;
|
||
|
||
regmap_read(regmap, PLL_USER_CTL(pll), &val);
|
||
|
||
val >>= pll->post_div_shift;
|
||
val &= PLL_POST_DIV_MASK(pll);
|
||
|
||
for (i = 0; i < pll->num_post_div; i++) {
|
||
if (pll->post_div_table[i].val == val) {
|
||
div = pll->post_div_table[i].div;
|
||
break;
|
||
}
|
||
}
|
||
|
||
return (parent_rate / div);
|
||
}
|
||
|
||
static long
|
||
clk_trion_pll_postdiv_round_rate(struct clk_hw *hw, unsigned long rate,
|
||
unsigned long *prate)
|
||
{
|
||
struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
|
||
|
||
return divider_round_rate(hw, rate, prate, pll->post_div_table,
|
||
pll->width, CLK_DIVIDER_ROUND_CLOSEST);
|
||
};
|
||
|
||
static int
|
||
clk_trion_pll_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
|
||
unsigned long parent_rate)
|
||
{
|
||
struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
|
||
struct regmap *regmap = pll->clkr.regmap;
|
||
int i, val = 0, div;
|
||
|
||
div = DIV_ROUND_UP_ULL(parent_rate, rate);
|
||
for (i = 0; i < pll->num_post_div; i++) {
|
||
if (pll->post_div_table[i].div == div) {
|
||
val = pll->post_div_table[i].val;
|
||
break;
|
||
}
|
||
}
|
||
|
||
return regmap_update_bits(regmap, PLL_USER_CTL(pll),
|
||
PLL_POST_DIV_MASK(pll) << PLL_POST_DIV_SHIFT,
|
||
val << PLL_POST_DIV_SHIFT);
|
||
}
|
||
|
||
const struct clk_ops clk_alpha_pll_postdiv_trion_ops = {
|
||
.recalc_rate = clk_trion_pll_postdiv_recalc_rate,
|
||
.round_rate = clk_trion_pll_postdiv_round_rate,
|
||
.set_rate = clk_trion_pll_postdiv_set_rate,
|
||
};
|
||
EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_trion_ops);
|
||
|
||
static long clk_alpha_pll_postdiv_fabia_round_rate(struct clk_hw *hw,
|
||
unsigned long rate, unsigned long *prate)
|
||
{
|
||
struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
|
||
|
||
return divider_round_rate(hw, rate, prate, pll->post_div_table,
|
||
pll->width, CLK_DIVIDER_ROUND_CLOSEST);
|
||
}
|
||
|
||
static int clk_alpha_pll_postdiv_fabia_set_rate(struct clk_hw *hw,
|
||
unsigned long rate, unsigned long parent_rate)
|
||
{
|
||
struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
|
||
int i, val = 0, div, ret;
|
||
|
||
/*
|
||
* If the PLL is in FSM mode, then treat set_rate callback as a
|
||
* no-operation.
|
||
*/
|
||
ret = regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
|
||
if (ret)
|
||
return ret;
|
||
|
||
if (val & PLL_VOTE_FSM_ENA)
|
||
return 0;
|
||
|
||
div = DIV_ROUND_UP_ULL(parent_rate, rate);
|
||
for (i = 0; i < pll->num_post_div; i++) {
|
||
if (pll->post_div_table[i].div == div) {
|
||
val = pll->post_div_table[i].val;
|
||
break;
|
||
}
|
||
}
|
||
|
||
return regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll),
|
||
(BIT(pll->width) - 1) << pll->post_div_shift,
|
||
val << pll->post_div_shift);
|
||
}
|
||
|
||
const struct clk_ops clk_alpha_pll_postdiv_fabia_ops = {
|
||
.recalc_rate = clk_alpha_pll_postdiv_fabia_recalc_rate,
|
||
.round_rate = clk_alpha_pll_postdiv_fabia_round_rate,
|
||
.set_rate = clk_alpha_pll_postdiv_fabia_set_rate,
|
||
};
|
||
EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_fabia_ops);
|
||
|
||
/**
|
||
* clk_lucid_pll_configure - configure the lucid pll
|
||
*
|
||
* @pll: clk alpha pll
|
||
* @regmap: register map
|
||
* @config: configuration to apply for pll
|
||
*/
|
||
void clk_trion_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
|
||
const struct alpha_pll_config *config)
|
||
{
|
||
/*
|
||
* If the bootloader left the PLL enabled it's likely that there are
|
||
* RCGs that will lock up if we disable the PLL below.
|
||
*/
|
||
if (trion_pll_is_enabled(pll, regmap)) {
|
||
pr_debug("Trion PLL is already enabled, skipping configuration\n");
|
||
return;
|
||
}
|
||
|
||
clk_alpha_pll_write_config(regmap, PLL_L_VAL(pll), config->l);
|
||
regmap_write(regmap, PLL_CAL_L_VAL(pll), TRION_PLL_CAL_VAL);
|
||
clk_alpha_pll_write_config(regmap, PLL_ALPHA_VAL(pll), config->alpha);
|
||
clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL(pll),
|
||
config->config_ctl_val);
|
||
clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL_U(pll),
|
||
config->config_ctl_hi_val);
|
||
clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL_U1(pll),
|
||
config->config_ctl_hi1_val);
|
||
clk_alpha_pll_write_config(regmap, PLL_USER_CTL(pll),
|
||
config->user_ctl_val);
|
||
clk_alpha_pll_write_config(regmap, PLL_USER_CTL_U(pll),
|
||
config->user_ctl_hi_val);
|
||
clk_alpha_pll_write_config(regmap, PLL_USER_CTL_U1(pll),
|
||
config->user_ctl_hi1_val);
|
||
clk_alpha_pll_write_config(regmap, PLL_TEST_CTL(pll),
|
||
config->test_ctl_val);
|
||
clk_alpha_pll_write_config(regmap, PLL_TEST_CTL_U(pll),
|
||
config->test_ctl_hi_val);
|
||
clk_alpha_pll_write_config(regmap, PLL_TEST_CTL_U1(pll),
|
||
config->test_ctl_hi1_val);
|
||
|
||
regmap_update_bits(regmap, PLL_MODE(pll), PLL_UPDATE_BYPASS,
|
||
PLL_UPDATE_BYPASS);
|
||
|
||
/* Disable PLL output */
|
||
regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
|
||
|
||
/* Set operation mode to OFF */
|
||
regmap_write(regmap, PLL_OPMODE(pll), PLL_STANDBY);
|
||
|
||
/* Place the PLL in STANDBY mode */
|
||
regmap_update_bits(regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
|
||
}
|
||
EXPORT_SYMBOL_GPL(clk_trion_pll_configure);
|
||
|
||
/*
|
||
* The TRION PLL requires a power-on self-calibration which happens when the
|
||
* PLL comes out of reset. Calibrate in case it is not completed.
|
||
*/
|
||
static int __alpha_pll_trion_prepare(struct clk_hw *hw, u32 pcal_done)
|
||
{
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
u32 val;
|
||
int ret;
|
||
|
||
/* Return early if calibration is not needed. */
|
||
regmap_read(pll->clkr.regmap, PLL_STATUS(pll), &val);
|
||
if (val & pcal_done)
|
||
return 0;
|
||
|
||
/* On/off to calibrate */
|
||
ret = clk_trion_pll_enable(hw);
|
||
if (!ret)
|
||
clk_trion_pll_disable(hw);
|
||
|
||
return ret;
|
||
}
|
||
|
||
static int alpha_pll_trion_prepare(struct clk_hw *hw)
|
||
{
|
||
return __alpha_pll_trion_prepare(hw, TRION_PCAL_DONE);
|
||
}
|
||
|
||
static int alpha_pll_lucid_prepare(struct clk_hw *hw)
|
||
{
|
||
return __alpha_pll_trion_prepare(hw, LUCID_PCAL_DONE);
|
||
}
|
||
|
||
static int __alpha_pll_trion_set_rate(struct clk_hw *hw, unsigned long rate,
|
||
unsigned long prate, u32 latch_bit, u32 latch_ack)
|
||
{
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
unsigned long rrate;
|
||
u32 val, l, alpha_width = pll_alpha_width(pll);
|
||
u64 a;
|
||
int ret;
|
||
|
||
rrate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);
|
||
|
||
ret = alpha_pll_check_rate_margin(hw, rrate, rate);
|
||
if (ret < 0)
|
||
return ret;
|
||
|
||
regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
|
||
regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
|
||
|
||
/* Latch the PLL input */
|
||
ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), latch_bit, latch_bit);
|
||
if (ret)
|
||
return ret;
|
||
|
||
/* Wait for 2 reference cycles before checking the ACK bit. */
|
||
udelay(1);
|
||
regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
|
||
if (!(val & latch_ack)) {
|
||
pr_err("Lucid PLL latch failed. Output may be unstable!\n");
|
||
return -EINVAL;
|
||
}
|
||
|
||
/* Return the latch input to 0 */
|
||
ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), latch_bit, 0);
|
||
if (ret)
|
||
return ret;
|
||
|
||
if (clk_hw_is_enabled(hw)) {
|
||
ret = wait_for_pll_enable_lock(pll);
|
||
if (ret)
|
||
return ret;
|
||
}
|
||
|
||
/* Wait for PLL output to stabilize */
|
||
udelay(100);
|
||
return 0;
|
||
}
|
||
|
||
static int alpha_pll_trion_set_rate(struct clk_hw *hw, unsigned long rate,
|
||
unsigned long prate)
|
||
{
|
||
return __alpha_pll_trion_set_rate(hw, rate, prate, PLL_UPDATE, ALPHA_PLL_ACK_LATCH);
|
||
}
|
||
|
||
const struct clk_ops clk_alpha_pll_trion_ops = {
|
||
.prepare = alpha_pll_trion_prepare,
|
||
.enable = clk_trion_pll_enable,
|
||
.disable = clk_trion_pll_disable,
|
||
.is_enabled = clk_trion_pll_is_enabled,
|
||
.recalc_rate = clk_trion_pll_recalc_rate,
|
||
.round_rate = clk_alpha_pll_round_rate,
|
||
.set_rate = alpha_pll_trion_set_rate,
|
||
};
|
||
EXPORT_SYMBOL_GPL(clk_alpha_pll_trion_ops);
|
||
|
||
const struct clk_ops clk_alpha_pll_lucid_ops = {
|
||
.prepare = alpha_pll_lucid_prepare,
|
||
.enable = clk_trion_pll_enable,
|
||
.disable = clk_trion_pll_disable,
|
||
.is_enabled = clk_trion_pll_is_enabled,
|
||
.recalc_rate = clk_trion_pll_recalc_rate,
|
||
.round_rate = clk_alpha_pll_round_rate,
|
||
.set_rate = alpha_pll_trion_set_rate,
|
||
};
|
||
EXPORT_SYMBOL_GPL(clk_alpha_pll_lucid_ops);
|
||
|
||
const struct clk_ops clk_alpha_pll_postdiv_lucid_ops = {
|
||
.recalc_rate = clk_alpha_pll_postdiv_fabia_recalc_rate,
|
||
.round_rate = clk_alpha_pll_postdiv_fabia_round_rate,
|
||
.set_rate = clk_alpha_pll_postdiv_fabia_set_rate,
|
||
};
|
||
EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_lucid_ops);
|
||
|
||
void clk_agera_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
|
||
const struct alpha_pll_config *config)
|
||
{
|
||
clk_alpha_pll_write_config(regmap, PLL_L_VAL(pll), config->l);
|
||
clk_alpha_pll_write_config(regmap, PLL_ALPHA_VAL(pll), config->alpha);
|
||
clk_alpha_pll_write_config(regmap, PLL_USER_CTL(pll),
|
||
config->user_ctl_val);
|
||
clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL(pll),
|
||
config->config_ctl_val);
|
||
clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL_U(pll),
|
||
config->config_ctl_hi_val);
|
||
clk_alpha_pll_write_config(regmap, PLL_TEST_CTL(pll),
|
||
config->test_ctl_val);
|
||
clk_alpha_pll_write_config(regmap, PLL_TEST_CTL_U(pll),
|
||
config->test_ctl_hi_val);
|
||
}
|
||
EXPORT_SYMBOL_GPL(clk_agera_pll_configure);
|
||
|
||
static int clk_alpha_pll_agera_set_rate(struct clk_hw *hw, unsigned long rate,
|
||
unsigned long prate)
|
||
{
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
u32 l, alpha_width = pll_alpha_width(pll);
|
||
int ret;
|
||
unsigned long rrate;
|
||
u64 a;
|
||
|
||
rrate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);
|
||
ret = alpha_pll_check_rate_margin(hw, rrate, rate);
|
||
if (ret < 0)
|
||
return ret;
|
||
|
||
/* change L_VAL without having to go through the power on sequence */
|
||
regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
|
||
regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
|
||
|
||
if (clk_hw_is_enabled(hw))
|
||
return wait_for_pll_enable_lock(pll);
|
||
|
||
return 0;
|
||
}
|
||
|
||
const struct clk_ops clk_alpha_pll_agera_ops = {
|
||
.enable = clk_alpha_pll_enable,
|
||
.disable = clk_alpha_pll_disable,
|
||
.is_enabled = clk_alpha_pll_is_enabled,
|
||
.recalc_rate = alpha_pll_fabia_recalc_rate,
|
||
.round_rate = clk_alpha_pll_round_rate,
|
||
.set_rate = clk_alpha_pll_agera_set_rate,
|
||
};
|
||
EXPORT_SYMBOL_GPL(clk_alpha_pll_agera_ops);
|
||
|
||
static int alpha_pll_lucid_5lpe_enable(struct clk_hw *hw)
|
||
{
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
u32 val;
|
||
int ret;
|
||
|
||
ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
|
||
if (ret)
|
||
return ret;
|
||
|
||
/* If in FSM mode, just vote for it */
|
||
if (val & LUCID_5LPE_ENABLE_VOTE_RUN) {
|
||
ret = clk_enable_regmap(hw);
|
||
if (ret)
|
||
return ret;
|
||
return wait_for_pll_enable_lock(pll);
|
||
}
|
||
|
||
/* Check if PLL is already enabled, return if enabled */
|
||
ret = trion_pll_is_enabled(pll, pll->clkr.regmap);
|
||
if (ret < 0)
|
||
return ret;
|
||
|
||
ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
|
||
if (ret)
|
||
return ret;
|
||
|
||
regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), PLL_RUN);
|
||
|
||
ret = wait_for_pll_enable_lock(pll);
|
||
if (ret)
|
||
return ret;
|
||
|
||
/* Enable the PLL outputs */
|
||
ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, PLL_OUT_MASK);
|
||
if (ret)
|
||
return ret;
|
||
|
||
/* Enable the global PLL outputs */
|
||
return regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_OUTCTRL, PLL_OUTCTRL);
|
||
}
|
||
|
||
static void alpha_pll_lucid_5lpe_disable(struct clk_hw *hw)
|
||
{
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
u32 val;
|
||
int ret;
|
||
|
||
ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
|
||
if (ret)
|
||
return;
|
||
|
||
/* If in FSM mode, just unvote it */
|
||
if (val & LUCID_5LPE_ENABLE_VOTE_RUN) {
|
||
clk_disable_regmap(hw);
|
||
return;
|
||
}
|
||
|
||
/* Disable the global PLL output */
|
||
ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
|
||
if (ret)
|
||
return;
|
||
|
||
/* Disable the PLL outputs */
|
||
ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, 0);
|
||
if (ret)
|
||
return;
|
||
|
||
/* Place the PLL mode in STANDBY */
|
||
regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), PLL_STANDBY);
|
||
}
|
||
|
||
/*
|
||
* The Lucid 5LPE PLL requires a power-on self-calibration which happens
|
||
* when the PLL comes out of reset. Calibrate in case it is not completed.
|
||
*/
|
||
static int alpha_pll_lucid_5lpe_prepare(struct clk_hw *hw)
|
||
{
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
struct clk_hw *p;
|
||
u32 val = 0;
|
||
int ret;
|
||
|
||
/* Return early if calibration is not needed. */
|
||
regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
|
||
if (val & LUCID_5LPE_PCAL_DONE)
|
||
return 0;
|
||
|
||
p = clk_hw_get_parent(hw);
|
||
if (!p)
|
||
return -EINVAL;
|
||
|
||
ret = alpha_pll_lucid_5lpe_enable(hw);
|
||
if (ret)
|
||
return ret;
|
||
|
||
alpha_pll_lucid_5lpe_disable(hw);
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int alpha_pll_lucid_5lpe_set_rate(struct clk_hw *hw, unsigned long rate,
|
||
unsigned long prate)
|
||
{
|
||
return __alpha_pll_trion_set_rate(hw, rate, prate,
|
||
LUCID_5LPE_PLL_LATCH_INPUT,
|
||
LUCID_5LPE_ALPHA_PLL_ACK_LATCH);
|
||
}
|
||
|
||
static int __clk_lucid_pll_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
|
||
unsigned long parent_rate,
|
||
unsigned long enable_vote_run)
|
||
{
|
||
struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
|
||
struct regmap *regmap = pll->clkr.regmap;
|
||
int i, val, div, ret;
|
||
u32 mask;
|
||
|
||
/*
|
||
* If the PLL is in FSM mode, then treat set_rate callback as a
|
||
* no-operation.
|
||
*/
|
||
ret = regmap_read(regmap, PLL_USER_CTL(pll), &val);
|
||
if (ret)
|
||
return ret;
|
||
|
||
if (val & enable_vote_run)
|
||
return 0;
|
||
|
||
if (!pll->post_div_table) {
|
||
pr_err("Missing the post_div_table for the %s PLL\n",
|
||
clk_hw_get_name(&pll->clkr.hw));
|
||
return -EINVAL;
|
||
}
|
||
|
||
div = DIV_ROUND_UP_ULL((u64)parent_rate, rate);
|
||
for (i = 0; i < pll->num_post_div; i++) {
|
||
if (pll->post_div_table[i].div == div) {
|
||
val = pll->post_div_table[i].val;
|
||
break;
|
||
}
|
||
}
|
||
|
||
mask = GENMASK(pll->width + pll->post_div_shift - 1, pll->post_div_shift);
|
||
return regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll),
|
||
mask, val << pll->post_div_shift);
|
||
}
|
||
|
||
static int clk_lucid_5lpe_pll_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
|
||
unsigned long parent_rate)
|
||
{
|
||
return __clk_lucid_pll_postdiv_set_rate(hw, rate, parent_rate, LUCID_5LPE_ENABLE_VOTE_RUN);
|
||
}
|
||
|
||
const struct clk_ops clk_alpha_pll_lucid_5lpe_ops = {
|
||
.prepare = alpha_pll_lucid_5lpe_prepare,
|
||
.enable = alpha_pll_lucid_5lpe_enable,
|
||
.disable = alpha_pll_lucid_5lpe_disable,
|
||
.is_enabled = clk_trion_pll_is_enabled,
|
||
.recalc_rate = clk_trion_pll_recalc_rate,
|
||
.round_rate = clk_alpha_pll_round_rate,
|
||
.set_rate = alpha_pll_lucid_5lpe_set_rate,
|
||
};
|
||
EXPORT_SYMBOL(clk_alpha_pll_lucid_5lpe_ops);
|
||
|
||
const struct clk_ops clk_alpha_pll_fixed_lucid_5lpe_ops = {
|
||
.enable = alpha_pll_lucid_5lpe_enable,
|
||
.disable = alpha_pll_lucid_5lpe_disable,
|
||
.is_enabled = clk_trion_pll_is_enabled,
|
||
.recalc_rate = clk_trion_pll_recalc_rate,
|
||
.round_rate = clk_alpha_pll_round_rate,
|
||
};
|
||
EXPORT_SYMBOL(clk_alpha_pll_fixed_lucid_5lpe_ops);
|
||
|
||
const struct clk_ops clk_alpha_pll_postdiv_lucid_5lpe_ops = {
|
||
.recalc_rate = clk_alpha_pll_postdiv_fabia_recalc_rate,
|
||
.round_rate = clk_alpha_pll_postdiv_fabia_round_rate,
|
||
.set_rate = clk_lucid_5lpe_pll_postdiv_set_rate,
|
||
};
|
||
EXPORT_SYMBOL(clk_alpha_pll_postdiv_lucid_5lpe_ops);
|
||
|
||
void clk_zonda_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
|
||
const struct alpha_pll_config *config)
|
||
{
|
||
clk_alpha_pll_write_config(regmap, PLL_L_VAL(pll), config->l);
|
||
clk_alpha_pll_write_config(regmap, PLL_ALPHA_VAL(pll), config->alpha);
|
||
clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL(pll), config->config_ctl_val);
|
||
clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL_U(pll), config->config_ctl_hi_val);
|
||
clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL_U1(pll), config->config_ctl_hi1_val);
|
||
clk_alpha_pll_write_config(regmap, PLL_USER_CTL(pll), config->user_ctl_val);
|
||
clk_alpha_pll_write_config(regmap, PLL_USER_CTL_U(pll), config->user_ctl_hi_val);
|
||
clk_alpha_pll_write_config(regmap, PLL_USER_CTL_U1(pll), config->user_ctl_hi1_val);
|
||
clk_alpha_pll_write_config(regmap, PLL_TEST_CTL(pll), config->test_ctl_val);
|
||
clk_alpha_pll_write_config(regmap, PLL_TEST_CTL_U(pll), config->test_ctl_hi_val);
|
||
clk_alpha_pll_write_config(regmap, PLL_TEST_CTL_U1(pll), config->test_ctl_hi1_val);
|
||
|
||
regmap_update_bits(regmap, PLL_MODE(pll), PLL_BYPASSNL, 0);
|
||
|
||
/* Disable PLL output */
|
||
regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
|
||
|
||
/* Set operation mode to OFF */
|
||
regmap_write(regmap, PLL_OPMODE(pll), PLL_STANDBY);
|
||
|
||
/* Place the PLL in STANDBY mode */
|
||
regmap_update_bits(regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
|
||
}
|
||
EXPORT_SYMBOL_GPL(clk_zonda_pll_configure);
|
||
|
||
static int clk_zonda_pll_enable(struct clk_hw *hw)
|
||
{
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
struct regmap *regmap = pll->clkr.regmap;
|
||
u32 val;
|
||
int ret;
|
||
|
||
regmap_read(regmap, PLL_MODE(pll), &val);
|
||
|
||
/* If in FSM mode, just vote for it */
|
||
if (val & PLL_VOTE_FSM_ENA) {
|
||
ret = clk_enable_regmap(hw);
|
||
if (ret)
|
||
return ret;
|
||
return wait_for_pll_enable_active(pll);
|
||
}
|
||
|
||
/* Get the PLL out of bypass mode */
|
||
regmap_update_bits(regmap, PLL_MODE(pll), PLL_BYPASSNL, PLL_BYPASSNL);
|
||
|
||
/*
|
||
* H/W requires a 1us delay between disabling the bypass and
|
||
* de-asserting the reset.
|
||
*/
|
||
udelay(1);
|
||
|
||
regmap_update_bits(regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
|
||
|
||
/* Set operation mode to RUN */
|
||
regmap_write(regmap, PLL_OPMODE(pll), PLL_RUN);
|
||
|
||
regmap_read(regmap, PLL_TEST_CTL(pll), &val);
|
||
|
||
/* If cfa mode then poll for freq lock */
|
||
if (val & ZONDA_STAY_IN_CFA)
|
||
ret = wait_for_zonda_pll_freq_lock(pll);
|
||
else
|
||
ret = wait_for_pll_enable_lock(pll);
|
||
if (ret)
|
||
return ret;
|
||
|
||
/* Enable the PLL outputs */
|
||
regmap_update_bits(regmap, PLL_USER_CTL(pll), ZONDA_PLL_OUT_MASK, ZONDA_PLL_OUT_MASK);
|
||
|
||
/* Enable the global PLL outputs */
|
||
regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL, PLL_OUTCTRL);
|
||
|
||
return 0;
|
||
}
|
||
|
||
static void clk_zonda_pll_disable(struct clk_hw *hw)
|
||
{
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
struct regmap *regmap = pll->clkr.regmap;
|
||
u32 val;
|
||
|
||
regmap_read(regmap, PLL_MODE(pll), &val);
|
||
|
||
/* If in FSM mode, just unvote it */
|
||
if (val & PLL_VOTE_FSM_ENA) {
|
||
clk_disable_regmap(hw);
|
||
return;
|
||
}
|
||
|
||
/* Disable the global PLL output */
|
||
regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
|
||
|
||
/* Disable the PLL outputs */
|
||
regmap_update_bits(regmap, PLL_USER_CTL(pll), ZONDA_PLL_OUT_MASK, 0);
|
||
|
||
/* Put the PLL in bypass and reset */
|
||
regmap_update_bits(regmap, PLL_MODE(pll), PLL_RESET_N | PLL_BYPASSNL, 0);
|
||
|
||
/* Place the PLL mode in OFF state */
|
||
regmap_write(regmap, PLL_OPMODE(pll), 0x0);
|
||
}
|
||
|
||
static int clk_zonda_pll_set_rate(struct clk_hw *hw, unsigned long rate,
|
||
unsigned long prate)
|
||
{
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
unsigned long rrate;
|
||
u32 test_ctl_val;
|
||
u32 l, alpha_width = pll_alpha_width(pll);
|
||
u64 a;
|
||
int ret;
|
||
|
||
rrate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);
|
||
|
||
ret = alpha_pll_check_rate_margin(hw, rrate, rate);
|
||
if (ret < 0)
|
||
return ret;
|
||
|
||
regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
|
||
regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
|
||
|
||
/* Wait before polling for the frequency latch */
|
||
udelay(5);
|
||
|
||
/* Read stay in cfa mode */
|
||
regmap_read(pll->clkr.regmap, PLL_TEST_CTL(pll), &test_ctl_val);
|
||
|
||
/* If cfa mode then poll for freq lock */
|
||
if (test_ctl_val & ZONDA_STAY_IN_CFA)
|
||
ret = wait_for_zonda_pll_freq_lock(pll);
|
||
else
|
||
ret = wait_for_pll_enable_lock(pll);
|
||
if (ret)
|
||
return ret;
|
||
|
||
/* Wait for PLL output to stabilize */
|
||
udelay(100);
|
||
return 0;
|
||
}
|
||
|
||
const struct clk_ops clk_alpha_pll_zonda_ops = {
|
||
.enable = clk_zonda_pll_enable,
|
||
.disable = clk_zonda_pll_disable,
|
||
.is_enabled = clk_trion_pll_is_enabled,
|
||
.recalc_rate = clk_trion_pll_recalc_rate,
|
||
.round_rate = clk_alpha_pll_round_rate,
|
||
.set_rate = clk_zonda_pll_set_rate,
|
||
};
|
||
EXPORT_SYMBOL(clk_alpha_pll_zonda_ops);
|
||
|
||
static int alpha_pll_lucid_evo_enable(struct clk_hw *hw)
|
||
{
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
struct regmap *regmap = pll->clkr.regmap;
|
||
u32 val;
|
||
int ret;
|
||
|
||
ret = regmap_read(regmap, PLL_USER_CTL(pll), &val);
|
||
if (ret)
|
||
return ret;
|
||
|
||
/* If in FSM mode, just vote for it */
|
||
if (val & LUCID_EVO_ENABLE_VOTE_RUN) {
|
||
ret = clk_enable_regmap(hw);
|
||
if (ret)
|
||
return ret;
|
||
return wait_for_pll_enable_lock(pll);
|
||
}
|
||
|
||
/* Check if PLL is already enabled */
|
||
ret = trion_pll_is_enabled(pll, regmap);
|
||
if (ret < 0) {
|
||
return ret;
|
||
} else if (ret) {
|
||
pr_warn("%s PLL is already enabled\n", clk_hw_get_name(&pll->clkr.hw));
|
||
return 0;
|
||
}
|
||
|
||
ret = regmap_update_bits(regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
|
||
if (ret)
|
||
return ret;
|
||
|
||
/* Set operation mode to RUN */
|
||
regmap_write(regmap, PLL_OPMODE(pll), PLL_RUN);
|
||
|
||
ret = wait_for_pll_enable_lock(pll);
|
||
if (ret)
|
||
return ret;
|
||
|
||
/* Enable the PLL outputs */
|
||
ret = regmap_update_bits(regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, PLL_OUT_MASK);
|
||
if (ret)
|
||
return ret;
|
||
|
||
/* Enable the global PLL outputs */
|
||
ret = regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL, PLL_OUTCTRL);
|
||
if (ret)
|
||
return ret;
|
||
|
||
/* Ensure that the write above goes through before returning. */
|
||
mb();
|
||
return ret;
|
||
}
|
||
|
||
static void alpha_pll_lucid_evo_disable(struct clk_hw *hw)
|
||
{
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
struct regmap *regmap = pll->clkr.regmap;
|
||
u32 val;
|
||
int ret;
|
||
|
||
ret = regmap_read(regmap, PLL_USER_CTL(pll), &val);
|
||
if (ret)
|
||
return;
|
||
|
||
/* If in FSM mode, just unvote it */
|
||
if (val & LUCID_EVO_ENABLE_VOTE_RUN) {
|
||
clk_disable_regmap(hw);
|
||
return;
|
||
}
|
||
|
||
/* Disable the global PLL output */
|
||
ret = regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
|
||
if (ret)
|
||
return;
|
||
|
||
/* Disable the PLL outputs */
|
||
ret = regmap_update_bits(regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, 0);
|
||
if (ret)
|
||
return;
|
||
|
||
/* Place the PLL mode in STANDBY */
|
||
regmap_write(regmap, PLL_OPMODE(pll), PLL_STANDBY);
|
||
}
|
||
|
||
static unsigned long alpha_pll_lucid_evo_recalc_rate(struct clk_hw *hw,
|
||
unsigned long parent_rate)
|
||
{
|
||
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
|
||
struct regmap *regmap = pll->clkr.regmap;
|
||
u32 l, frac;
|
||
|
||
regmap_read(regmap, PLL_L_VAL(pll), &l);
|
||
l &= LUCID_EVO_PLL_L_VAL_MASK;
|
||
regmap_read(regmap, PLL_ALPHA_VAL(pll), &frac);
|
||
|
||
return alpha_pll_calc_rate(parent_rate, l, frac, pll_alpha_width(pll));
|
||
}
|
||
|
||
static int clk_lucid_evo_pll_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
|
||
unsigned long parent_rate)
|
||
{
|
||
return __clk_lucid_pll_postdiv_set_rate(hw, rate, parent_rate, LUCID_EVO_ENABLE_VOTE_RUN);
|
||
}
|
||
|
||
const struct clk_ops clk_alpha_pll_fixed_lucid_evo_ops = {
|
||
.enable = alpha_pll_lucid_evo_enable,
|
||
.disable = alpha_pll_lucid_evo_disable,
|
||
.is_enabled = clk_trion_pll_is_enabled,
|
||
.recalc_rate = alpha_pll_lucid_evo_recalc_rate,
|
||
.round_rate = clk_alpha_pll_round_rate,
|
||
};
|
||
EXPORT_SYMBOL_GPL(clk_alpha_pll_fixed_lucid_evo_ops);
|
||
|
||
const struct clk_ops clk_alpha_pll_postdiv_lucid_evo_ops = {
|
||
.recalc_rate = clk_alpha_pll_postdiv_fabia_recalc_rate,
|
||
.round_rate = clk_alpha_pll_postdiv_fabia_round_rate,
|
||
.set_rate = clk_lucid_evo_pll_postdiv_set_rate,
|
||
};
|
||
EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_lucid_evo_ops);
|