linux/drivers/scsi/isci
Marcin Tomczak d4ec1cf61f [SCSI] isci: Fix IO fails when pull cable from phy in x4 wideport in MPC mode.
Failure seen pulling a cable from a x4 port configured in manual port
configuration (MPC) mode (MPC mode is set by the the OEM paramaters
provided by the platform or isci_firmware.bin).  While IO running to
devices behind and expander, plugging out the cable from phy is causing
IO failures and IO drops on disks and never recover.

It happens because during link up/down the phy were being taken out of
the port.

Fix: during link down the phy is kept in the same logical port.

Signed-off-by: Marcin Tomczak <marcin.tomczak@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16 11:45:19 +04:00
..
host.c [SCSI] isci: link speeds default to gen 2 2012-01-16 11:43:59 +04:00
host.h [SCSI] isci: oem parameter format v1.3 (cable select) 2012-01-16 11:43:04 +04:00
init.c [SCSI] isci: update version to 1.1 2012-01-16 11:44:54 +04:00
isci.h [SCSI] isci: oem parameter format v1.3 (cable select) 2012-01-16 11:43:04 +04:00
Makefile isci: merge sata.[ch] into request.c 2011-07-03 04:04:52 -07:00
phy.c [SCSI] isci: oem parameter format v1.1 (ssc select) 2012-01-16 11:42:00 +04:00
phy.h isci: kill 'get/set' macros 2011-07-03 04:04:52 -07:00
port_config.c [SCSI] isci: fix missed unlock in apc_agent_timeout() 2011-10-02 13:08:00 -05:00
port.c [SCSI] isci: Fix IO fails when pull cable from phy in x4 wideport in MPC mode. 2012-01-16 11:45:19 +04:00
port.h [SCSI] isci: revert bcn filtering 2011-10-31 13:23:01 +04:00
probe_roms.c [SCSI] isci: update afe (analog-front-end) recipe for C1 2012-01-16 11:40:29 +04:00
probe_roms.h [SCSI] isci: oem parameter format v1.3 (cable select) 2012-01-16 11:43:04 +04:00
registers.h [SCSI] isci: fix sgpio register definitions 2011-09-22 15:00:56 +04:00
remote_device.c [SCSI] isci: No need to manage the pending reset bit on pending requests. 2011-10-31 13:20:28 +04:00
remote_device.h [SCSI] isci: No need to manage the pending reset bit on pending requests. 2011-10-31 13:20:28 +04:00
remote_node_context.c isci: kill 'get/set' macros 2011-07-03 04:04:52 -07:00
remote_node_context.h isci: kill 'get/set' macros 2011-07-03 04:04:52 -07:00
remote_node_table.c isci: retire scic_sds_ and scic_ prefixes 2011-07-03 04:04:52 -07:00
remote_node_table.h isci: retire scic_sds_ and scic_ prefixes 2011-07-03 04:04:52 -07:00
request.c [SCSI] isci: Remove redundant isci_request.ttype field. 2011-10-31 13:19:47 +04:00
request.h [SCSI] isci: Remove redundant isci_request.ttype field. 2011-10-31 13:19:47 +04:00
sas.h [SCSI] isci: fix support for large smp requests 2011-10-02 13:07:17 -05:00
scu_completion_codes.h isci: uplevel register hardware data structures and unsolicited frame handling 2011-07-03 04:04:47 -07:00
scu_event_codes.h isci: uplevel register hardware data structures and unsolicited frame handling 2011-07-03 04:04:47 -07:00
scu_remote_node_context.h isci: move remote_device handling out of the core 2011-07-03 04:00:38 -07:00
scu_task_context.h isci: uplevel register hardware data structures and unsolicited frame handling 2011-07-03 04:04:47 -07:00
task.c [SCSI] isci: remove unused 'isci_tmf->device' field 2012-01-16 11:44:15 +04:00
task.h [SCSI] isci: remove unused 'isci_tmf->device' field 2012-01-16 11:44:15 +04:00
unsolicited_frame_control.c [SCSI] isci: fix 32-bit operation when CONFIG_HIGHMEM64G=n 2011-08-23 19:50:27 -07:00
unsolicited_frame_control.h [SCSI] isci: fix 32-bit operation when CONFIG_HIGHMEM64G=n 2011-08-23 19:50:27 -07:00