korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-27 04:54:41 +08:00
Code Issues Packages Projects Releases Wiki Activity
d4e1f5a14e
linux/arch/arm/boot/dts/ste-href-ab8500.dtsi
Linus Walleij 7acacfbc3d ARM: ux500: move AB8500 clock out pins to DT 
This moves the AB8500 pin settings for the clock out pins over
to the device tree. We can delete the special setup calls for the
platforms only using the AB8500 and not AB8505.

Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-04 20:50:50 +01:00

429 lines
9.6 KiB
Plaintext
Raw Blame History

/*
* Copyright 2014 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/ {
soc {
prcmu@80157000 {
ab8500 {
ab8500-gpio {
/* Hog a few default settings */
pinctrl-names = "default";
pinctrl-0 = <&gpio2_default_mode>,
<&gpio4_default_mode>,
<&gpio10_default_mode>,
<&gpio11_default_mode>,
<&gpio12_default_mode>,
<&gpio13_default_mode>,
<&gpio16_default_mode>,
<&gpio24_default_mode>,
<&gpio25_default_mode>,
<&gpio36_default_mode>,
<&gpio37_default_mode>,
<&gpio38_default_mode>,
<&gpio39_default_mode>,
<&gpio42_default_mode>,
<&gpio26_default_mode>,
<&gpio35_default_mode>,
<&ycbcr_default_mode>,
<&pwm_default_mode>,
<&adi1_default_mode>,
<&usbuicc_default_mode>,
<&dmic_default_mode>,
<&extcpena_default_mode>,
<&modsclsda_default_mode>;
/*
* Pins 2, 4, 10, 11, 12, 13, 16, 24, 25, 36, 37, 38, 39 and 42
* are muxed in as GPIO, and configured as INPUT PULL DOWN
*/
gpio2 {
gpio2_default_mode: gpio2_default {
default_mux {
ste,function = "gpio";
ste,pins = "gpio2_a_1";
};
default_cfg {
ste,pins = "GPIO2_T9";
input-enable;
bias-pull-down;
};
};
};
gpio4 {
gpio4_default_mode: gpio4_default {
default_mux {
ste,function = "gpio";
ste,pins = "gpio4_a_1";
};
default_cfg {
ste,pins = "GPIO4_W2";
input-enable;
bias-pull-down;
};
};
};
gpio10 {
gpio10_default_mode: gpio10_default {
default_mux {
ste,function = "gpio";
ste,pins = "gpio10_d_1";
};
default_cfg {
ste,pins = "GPIO10_U17";
input-enable;
bias-pull-down;
};
};
};
gpio11 {
gpio11_default_mode: gpio11_default {
default_mux {
ste,function = "gpio";
ste,pins = "gpio11_d_1";
};
default_cfg {
ste,pins = "GPIO11_AA18";
input-enable;
bias-pull-down;
};
};
};
gpio12 {
gpio12_default_mode: gpio12_default {
default_mux {
ste,function = "gpio";
ste,pins = "gpio12_d_1";
};
default_cfg {
ste,pins = "GPIO12_U16";
input-enable;
bias-pull-down;
};
};
};
gpio13 {
gpio13_default_mode: gpio13_default {
default_mux {
ste,function = "gpio";
ste,pins = "gpio13_d_1";
};
default_cfg {
ste,pins = "GPIO13_W17";
input-enable;
bias-pull-down;
};
};
};
gpio16 {
gpio16_default_mode: gpio16_default {
default_mux {
ste,function = "gpio";
ste,pins = "gpio16_a_1";
};
default_cfg {
ste,pins = "GPIO16_F15";
input-enable;
bias-pull-down;
};
};
};
gpio24 {
gpio24_default_mode: gpio24_default {
default_mux {
ste,function = "gpio";
ste,pins = "gpio24_a_1";
};
default_cfg {
ste,pins = "GPIO24_T14";
input-enable;
bias-pull-down;
};
};
};
gpio25 {
gpio25_default_mode: gpio25_default {
default_mux {
ste,function = "gpio";
ste,pins = "gpio25_a_1";
};
default_cfg {
ste,pins = "GPIO25_R16";
input-enable;
bias-pull-down;
};
};
};
gpio36 {
gpio36_default_mode: gpio36_default {
default_mux {
ste,function = "gpio";
ste,pins = "gpio36_a_1";
};
default_cfg {
ste,pins = "GPIO36_A17";
input-enable;
bias-pull-down;
};
};
};
gpio37 {
gpio37_default_mode: gpio37_default {
default_mux {
ste,function = "gpio";
ste,pins = "gpio37_a_1";
};
default_cfg {
ste,pins = "GPIO37_E15";
input-enable;
bias-pull-down;
};
};
};
gpio38 {
gpio38_default_mode: gpio38_default {
default_mux {
ste,function = "gpio";
ste,pins = "gpio38_a_1";
};
default_cfg {
ste,pins = "GPIO38_C17";
input-enable;
bias-pull-down;
};
};
};
gpio39 {
gpio39_default_mode: gpio39_default {
default_mux {
ste,function = "gpio";
ste,pins = "gpio39_a_1";
};
default_cfg {
ste,pins = "GPIO39_E16";
input-enable;
bias-pull-down;
};
};
};
gpio42 {
gpio42_default_mode: gpio42_default {
default_mux {
ste,function = "gpio";
ste,pins = "gpio42_a_1";
};
default_cfg {
ste,pins = "GPIO42_U2";
input-enable;
bias-pull-down;
};
};
};
/*
* Pins 26 and 35 muxed in as GPIO, and configured as OUTPUT LOW
*/
gpio26 {
gpio26_default_mode: gpio26_default {
default_mux {
ste,function = "gpio";
ste,pins = "gpio26_d_1";
};
default_cfg {
ste,pins = "GPIO26_M16";
output-low;
};
};
};
gpio35 {
gpio35_default_mode: gpio35_default {
default_mux {
ste,function = "gpio";
ste,pins = "gpio35_d_1";
};
default_cfg {
ste,pins = "GPIO35_W15";
output-low;
};
};
};
/*
* This sets up the YCBCR connector pins, i.e. analog video out.
* Set as input with no bias.
*/
ycbcr {
ycbcr_default_mode: ycbcr_default {
default_mux {
ste,function = "ycbcr";
ste,pins = "ycbcr0123_d_1";
};
default_cfg {
ste,pins = "GPIO6_Y18",
"GPIO7_AA20",
"GPIO8_W18",
"GPIO9_AA19";
input-enable;
bias-disable;
};
};
};
/* This sets up the PWM pins 14 and 15 */
pwm {
pwm_default_mode: pwm_default {
default_mux {
ste,function = "pwmout";
ste,pins = "pwmout1_d_1", "pwmout2_d_1";
};
default_cfg {
ste,pins = "GPIO14_F14",
"GPIO15_B17";
input-enable;
bias-pull-down;
};
};
};
/* This sets up audio interface 1 */
adi1 {
adi1_default_mode: adi1_default {
default_mux {
ste,function = "adi1";
ste,pins = "adi1_d_1";
};
default_cfg {
ste,pins = "GPIO17_P5",
"GPIO18_R5",
"GPIO19_U5",
"GPIO20_T5";
input-enable;
bias-pull-down;
};
};
};
/* This sets up the USB UICC pins */
usbuicc {
usbuicc_default_mode: usbuicc_default {
default_mux {
ste,function = "usbuicc";
ste,pins = "usbuicc_d_1";
};
default_cfg {
ste,pins = "GPIO21_H19",
"GPIO22_G20",
"GPIO23_G19";
input-enable;
bias-pull-down;
};
};
};
/* This sets up the microphone pins */
dmic {
dmic_default_mode: dmic_default {
default_mux {
ste,function = "dmic";
ste,pins = "dmic12_d_1",
"dmic34_d_1",
"dmic56_d_1";
};
default_cfg {
ste,pins = "GPIO27_J6",
"GPIO28_K6",
"GPIO29_G6",
"GPIO30_H6",
"GPIO31_F5",
"GPIO32_G5";
input-enable;
bias-pull-down;
};
};
};
extcpena {
extcpena_default_mode: extcpena_default {
default_mux {
ste,function = "extcpena";
ste,pins = "extcpena_d_1";
};
default_cfg {
ste,pins = "GPIO34_R17";
input-enable;
bias-pull-down;
};
};
};
/* Modem I2C setup (SCL and SDA pins) */
modsclsda {
modsclsda_default_mode: modsclsda_default {
default_mux {
ste,function = "modsclsda";
ste,pins = "modsclsda_d_1";
};
default_cfg {
ste,pins = "GPIO40_T19",
"GPIO41_U19";
input-enable;
bias-pull-down;
};
};
};
/*
* Clock output pins associated with regulators.
*/
sysclkreq2 {
sysclkreq2_default_mode: sysclkreq2_default {
default_mux {
ste,function = "sysclkreq";
ste,pins = "sysclkreq2_d_1";
};
default_cfg {
ste,pins = "GPIO1_T10";
input-enable;
bias-disable;
};
};
sysclkreq2_sleep_mode: sysclkreq2_sleep {
default_mux {
ste,function = "gpio";
ste,pins = "gpio1_a_1";
};
default_cfg {
ste,pins = "GPIO1_T10";
input-enable;
bias-pull-down;
};
};
};
sysclkreq4 {
sysclkreq4_default_mode: sysclkreq4_default {
default_mux {
ste,function = "sysclkreq";
ste,pins = "sysclkreq4_d_1";
};
default_cfg {
ste,pins = "GPIO3_U9";
input-enable;
bias-disable;
};
};
sysclkreq4_sleep_mode: sysclkreq4_sleep {
default_mux {
ste,function = "gpio";
ste,pins = "gpio3_a_1";
};
default_cfg {
ste,pins = "GPIO3_U9";
input-enable;
bias-pull-down;
};
};
};
};
};
};
};
};
Reference in New Issue View Git Blame Copy Permalink