mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-20 09:34:44 +08:00
e865802357
When working on the rp_filter problem, I didn't realise that disabling it on the network devices didn't cover all cases: rp_filter could also be enabled globally in the namespace, in which case it would drop packets, even if the net device has rp_filter=0. Fixes:1ccd58331f("selftests: disable rp_filter when testing bareudp") Fixes:bbbc7aa45e("selftests: add test script for bareudp tunnels") Signed-off-by: Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/f2d459346471f163b239aa9d63ce3e2ba9c62895.1605107012.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
547 lines
21 KiB
Bash
Executable File
547 lines
21 KiB
Bash
Executable File
#!/bin/sh
|
|
# SPDX-License-Identifier: GPL-2.0
|
|
|
|
# Test various bareudp tunnel configurations.
|
|
#
|
|
# The bareudp module allows to tunnel network protocols like IP or MPLS over
|
|
# UDP, without adding any intermediate header. This scripts tests several
|
|
# configurations of bareudp (using IPv4 or IPv6 as underlay and transporting
|
|
# IPv4, IPv6 or MPLS packets on the overlay).
|
|
#
|
|
# Network topology:
|
|
#
|
|
# * A chain of 4 network namespaces, connected with veth pairs. Each veth
|
|
# is assigned an IPv4 and an IPv6 address. A host-route allows a veth to
|
|
# join its peer.
|
|
#
|
|
# * NS0 and NS3 are at the extremities of the chain. They have additional
|
|
# IPv4 and IPv6 addresses on their loopback device. Routes are added in NS0
|
|
# and NS3, so that they can communicate using these overlay IP addresses.
|
|
# For IPv4 and IPv6 reachability tests, the route simply sets the peer's
|
|
# veth address as gateway. For MPLS reachability tests, an MPLS header is
|
|
# also pushed before the IP header.
|
|
#
|
|
# * NS1 and NS2 are the intermediate namespaces. They use a bareudp device to
|
|
# encapsulate the traffic into UDP.
|
|
#
|
|
# +-----------------------------------------------------------------------+
|
|
# | NS0 |
|
|
# | |
|
|
# | lo: |
|
|
# | * IPv4 address: 192.0.2.100/32 |
|
|
# | * IPv6 address: 2001:db8::100/128 |
|
|
# | * IPv6 address: 2001:db8::200/128 |
|
|
# | * IPv4 route: 192.0.2.103/32 reachable via 192.0.2.11 |
|
|
# | * IPv6 route: 2001:db8::103/128 reachable via 2001:db8::11 |
|
|
# | * IPv6 route: 2001:db8::203/128 reachable via 2001:db8::11 |
|
|
# | (encapsulated with MPLS label 203) |
|
|
# | |
|
|
# | veth01: |
|
|
# | ^ * IPv4 address: 192.0.2.10, peer 192.0.2.11/32 |
|
|
# | | * IPv6 address: 2001:db8::10, peer 2001:db8::11/128 |
|
|
# | | |
|
|
# +---+-------------------------------------------------------------------+
|
|
# |
|
|
# | Traffic type: IP or MPLS (depending on test)
|
|
# |
|
|
# +---+-------------------------------------------------------------------+
|
|
# | | NS1 |
|
|
# | | |
|
|
# | v |
|
|
# | veth10: |
|
|
# | * IPv4 address: 192.0.2.11, peer 192.0.2.10/32 |
|
|
# | * IPv6 address: 2001:db8::11, peer 2001:db8::10/128 |
|
|
# | |
|
|
# | bareudp_ns1: |
|
|
# | * Encapsulate IP or MPLS packets received on veth10 into UDP |
|
|
# | and send the resulting packets through veth12. |
|
|
# | * Decapsulate bareudp packets (either IP or MPLS, over UDP) |
|
|
# | received on veth12 and send the inner packets through veth10. |
|
|
# | |
|
|
# | veth12: |
|
|
# | ^ * IPv4 address: 192.0.2.21, peer 192.0.2.22/32 |
|
|
# | | * IPv6 address: 2001:db8::21, peer 2001:db8::22/128 |
|
|
# | | |
|
|
# +---+-------------------------------------------------------------------+
|
|
# |
|
|
# | Traffic type: IP or MPLS (depending on test), over UDP
|
|
# |
|
|
# +---+-------------------------------------------------------------------+
|
|
# | | NS2 |
|
|
# | | |
|
|
# | v |
|
|
# | veth21: |
|
|
# | * IPv4 address: 192.0.2.22, peer 192.0.2.21/32 |
|
|
# | * IPv6 address: 2001:db8::22, peer 2001:db8::21/128 |
|
|
# | |
|
|
# | bareudp_ns2: |
|
|
# | * Decapsulate bareudp packets (either IP or MPLS, over UDP) |
|
|
# | received on veth21 and send the inner packets through veth23. |
|
|
# | * Encapsulate IP or MPLS packets received on veth23 into UDP |
|
|
# | and send the resulting packets through veth21. |
|
|
# | |
|
|
# | veth23: |
|
|
# | ^ * IPv4 address: 192.0.2.32, peer 192.0.2.33/32 |
|
|
# | | * IPv6 address: 2001:db8::32, peer 2001:db8::33/128 |
|
|
# | | |
|
|
# +---+-------------------------------------------------------------------+
|
|
# |
|
|
# | Traffic type: IP or MPLS (depending on test)
|
|
# |
|
|
# +---+-------------------------------------------------------------------+
|
|
# | | NS3 |
|
|
# | v |
|
|
# | veth32: |
|
|
# | * IPv4 address: 192.0.2.33, peer 192.0.2.32/32 |
|
|
# | * IPv6 address: 2001:db8::33, peer 2001:db8::32/128 |
|
|
# | |
|
|
# | lo: |
|
|
# | * IPv4 address: 192.0.2.103/32 |
|
|
# | * IPv6 address: 2001:db8::103/128 |
|
|
# | * IPv6 address: 2001:db8::203/128 |
|
|
# | * IPv4 route: 192.0.2.100/32 reachable via 192.0.2.32 |
|
|
# | * IPv6 route: 2001:db8::100/128 reachable via 2001:db8::32 |
|
|
# | * IPv6 route: 2001:db8::200/128 reachable via 2001:db8::32 |
|
|
# | (encapsulated with MPLS label 200) |
|
|
# | |
|
|
# +-----------------------------------------------------------------------+
|
|
|
|
ERR=4 # Return 4 by default, which is the SKIP code for kselftest
|
|
PING6="ping"
|
|
PAUSE_ON_FAIL="no"
|
|
|
|
readonly NS0=$(mktemp -u ns0-XXXXXXXX)
|
|
readonly NS1=$(mktemp -u ns1-XXXXXXXX)
|
|
readonly NS2=$(mktemp -u ns2-XXXXXXXX)
|
|
readonly NS3=$(mktemp -u ns3-XXXXXXXX)
|
|
|
|
# Exit the script after having removed the network namespaces it created
|
|
#
|
|
# Parameters:
|
|
#
|
|
# * The list of network namespaces to delete before exiting.
|
|
#
|
|
exit_cleanup()
|
|
{
|
|
for ns in "$@"; do
|
|
ip netns delete "${ns}" 2>/dev/null || true
|
|
done
|
|
|
|
if [ "${ERR}" -eq 4 ]; then
|
|
echo "Error: Setting up the testing environment failed." >&2
|
|
fi
|
|
|
|
exit "${ERR}"
|
|
}
|
|
|
|
# Create the four network namespaces used by the script (NS0, NS1, NS2 and NS3)
|
|
#
|
|
# New namespaces are cleaned up manually in case of error, to ensure that only
|
|
# namespaces created by this script are deleted.
|
|
create_namespaces()
|
|
{
|
|
ip netns add "${NS0}" || exit_cleanup
|
|
ip netns add "${NS1}" || exit_cleanup "${NS0}"
|
|
ip netns add "${NS2}" || exit_cleanup "${NS0}" "${NS1}"
|
|
ip netns add "${NS3}" || exit_cleanup "${NS0}" "${NS1}" "${NS2}"
|
|
}
|
|
|
|
# The trap function handler
|
|
#
|
|
exit_cleanup_all()
|
|
{
|
|
exit_cleanup "${NS0}" "${NS1}" "${NS2}" "${NS3}"
|
|
}
|
|
|
|
# Configure a network interface using a host route
|
|
#
|
|
# Parameters
|
|
#
|
|
# * $1: the netns the network interface resides in,
|
|
# * $2: the network interface name,
|
|
# * $3: the local IPv4 address to assign to this interface,
|
|
# * $4: the IPv4 address of the remote network interface,
|
|
# * $5: the local IPv6 address to assign to this interface,
|
|
# * $6: the IPv6 address of the remote network interface.
|
|
#
|
|
iface_config()
|
|
{
|
|
local NS="${1}"; readonly NS
|
|
local DEV="${2}"; readonly DEV
|
|
local LOCAL_IP4="${3}"; readonly LOCAL_IP4
|
|
local PEER_IP4="${4}"; readonly PEER_IP4
|
|
local LOCAL_IP6="${5}"; readonly LOCAL_IP6
|
|
local PEER_IP6="${6}"; readonly PEER_IP6
|
|
|
|
ip -netns "${NS}" link set dev "${DEV}" up
|
|
ip -netns "${NS}" address add dev "${DEV}" "${LOCAL_IP4}" peer "${PEER_IP4}"
|
|
ip -netns "${NS}" address add dev "${DEV}" "${LOCAL_IP6}" peer "${PEER_IP6}" nodad
|
|
}
|
|
|
|
# Create base networking topology:
|
|
#
|
|
# * set up the loopback device in all network namespaces (NS0..NS3),
|
|
# * set up a veth pair to connect each netns in sequence (NS0 with NS1,
|
|
# NS1 with NS2, etc.),
|
|
# * add and IPv4 and an IPv6 address on each veth interface,
|
|
# * prepare the ingress qdiscs in the intermediate namespaces.
|
|
#
|
|
setup_underlay()
|
|
{
|
|
for ns in "${NS0}" "${NS1}" "${NS2}" "${NS3}"; do
|
|
ip -netns "${ns}" link set dev lo up
|
|
done;
|
|
|
|
ip link add name veth01 netns "${NS0}" type veth peer name veth10 netns "${NS1}"
|
|
ip link add name veth12 netns "${NS1}" type veth peer name veth21 netns "${NS2}"
|
|
ip link add name veth23 netns "${NS2}" type veth peer name veth32 netns "${NS3}"
|
|
iface_config "${NS0}" veth01 192.0.2.10 192.0.2.11/32 2001:db8::10 2001:db8::11/128
|
|
iface_config "${NS1}" veth10 192.0.2.11 192.0.2.10/32 2001:db8::11 2001:db8::10/128
|
|
iface_config "${NS1}" veth12 192.0.2.21 192.0.2.22/32 2001:db8::21 2001:db8::22/128
|
|
iface_config "${NS2}" veth21 192.0.2.22 192.0.2.21/32 2001:db8::22 2001:db8::21/128
|
|
iface_config "${NS2}" veth23 192.0.2.32 192.0.2.33/32 2001:db8::32 2001:db8::33/128
|
|
iface_config "${NS3}" veth32 192.0.2.33 192.0.2.32/32 2001:db8::33 2001:db8::32/128
|
|
|
|
tc -netns "${NS1}" qdisc add dev veth10 ingress
|
|
tc -netns "${NS2}" qdisc add dev veth23 ingress
|
|
}
|
|
|
|
# Set up the IPv4, IPv6 and MPLS overlays.
|
|
#
|
|
# Configuration is similar for all protocols:
|
|
#
|
|
# * add an overlay IP address on the loopback interface of each edge
|
|
# namespace,
|
|
# * route these IP addresses via the intermediate namespaces (for the MPLS
|
|
# tests, this is also where MPLS encapsulation is done),
|
|
# * add routes for these IP addresses (or MPLS labels) in the intermediate
|
|
# namespaces.
|
|
#
|
|
# The bareudp encapsulation isn't configured in setup_overlay_*(). That will be
|
|
# done just before running the reachability tests.
|
|
|
|
setup_overlay_ipv4()
|
|
{
|
|
# Add the overlay IP addresses and route them through the veth devices
|
|
ip -netns "${NS0}" address add 192.0.2.100/32 dev lo
|
|
ip -netns "${NS3}" address add 192.0.2.103/32 dev lo
|
|
ip -netns "${NS0}" route add 192.0.2.103/32 src 192.0.2.100 via 192.0.2.11
|
|
ip -netns "${NS3}" route add 192.0.2.100/32 src 192.0.2.103 via 192.0.2.32
|
|
|
|
# Route the overlay addresses in the intermediate namespaces
|
|
# (used after bareudp decapsulation)
|
|
ip netns exec "${NS1}" sysctl -qw net.ipv4.ip_forward=1
|
|
ip netns exec "${NS2}" sysctl -qw net.ipv4.ip_forward=1
|
|
ip -netns "${NS1}" route add 192.0.2.100/32 via 192.0.2.10
|
|
ip -netns "${NS2}" route add 192.0.2.103/32 via 192.0.2.33
|
|
|
|
# The intermediate namespaces don't have routes for the reverse path,
|
|
# as it will be handled by tc. So we need to ensure that rp_filter is
|
|
# not going to block the traffic.
|
|
ip netns exec "${NS1}" sysctl -qw net.ipv4.conf.all.rp_filter=0
|
|
ip netns exec "${NS2}" sysctl -qw net.ipv4.conf.all.rp_filter=0
|
|
ip netns exec "${NS1}" sysctl -qw net.ipv4.conf.default.rp_filter=0
|
|
ip netns exec "${NS2}" sysctl -qw net.ipv4.conf.default.rp_filter=0
|
|
}
|
|
|
|
setup_overlay_ipv6()
|
|
{
|
|
# Add the overlay IP addresses and route them through the veth devices
|
|
ip -netns "${NS0}" address add 2001:db8::100/128 dev lo
|
|
ip -netns "${NS3}" address add 2001:db8::103/128 dev lo
|
|
ip -netns "${NS0}" route add 2001:db8::103/128 src 2001:db8::100 via 2001:db8::11
|
|
ip -netns "${NS3}" route add 2001:db8::100/128 src 2001:db8::103 via 2001:db8::32
|
|
|
|
# Route the overlay addresses in the intermediate namespaces
|
|
# (used after bareudp decapsulation)
|
|
ip netns exec "${NS1}" sysctl -qw net.ipv6.conf.all.forwarding=1
|
|
ip netns exec "${NS2}" sysctl -qw net.ipv6.conf.all.forwarding=1
|
|
ip -netns "${NS1}" route add 2001:db8::100/128 via 2001:db8::10
|
|
ip -netns "${NS2}" route add 2001:db8::103/128 via 2001:db8::33
|
|
}
|
|
|
|
setup_overlay_mpls()
|
|
{
|
|
# Add specific overlay IP addresses, routed over MPLS
|
|
ip -netns "${NS0}" address add 2001:db8::200/128 dev lo
|
|
ip -netns "${NS3}" address add 2001:db8::203/128 dev lo
|
|
ip -netns "${NS0}" route add 2001:db8::203/128 src 2001:db8::200 encap mpls 203 via 2001:db8::11
|
|
ip -netns "${NS3}" route add 2001:db8::200/128 src 2001:db8::203 encap mpls 200 via 2001:db8::32
|
|
|
|
# Route the MPLS packets in the intermediate namespaces
|
|
# (used after bareudp decapsulation)
|
|
ip netns exec "${NS1}" sysctl -qw net.mpls.platform_labels=256
|
|
ip netns exec "${NS2}" sysctl -qw net.mpls.platform_labels=256
|
|
ip -netns "${NS1}" -family mpls route add 200 via inet6 2001:db8::10
|
|
ip -netns "${NS2}" -family mpls route add 203 via inet6 2001:db8::33
|
|
}
|
|
|
|
# Run "ping" from NS0 and print the result
|
|
#
|
|
# Parameters:
|
|
#
|
|
# * $1: the variant of ping to use (normally either "ping" or "ping6"),
|
|
# * $2: the IP address to ping,
|
|
# * $3: a human readable description of the purpose of the test.
|
|
#
|
|
# If the test fails and PAUSE_ON_FAIL is active, the user is given the
|
|
# possibility to continue with the next test or to quit immediately.
|
|
#
|
|
ping_test_one()
|
|
{
|
|
local PING="$1"; readonly PING
|
|
local IP="$2"; readonly IP
|
|
local MSG="$3"; readonly MSG
|
|
local RET
|
|
|
|
printf "TEST: %-60s " "${MSG}"
|
|
|
|
set +e
|
|
ip netns exec "${NS0}" "${PING}" -w 5 -c 1 "${IP}" > /dev/null 2>&1
|
|
RET=$?
|
|
set -e
|
|
|
|
if [ "${RET}" -eq 0 ]; then
|
|
printf "[ OK ]\n"
|
|
else
|
|
ERR=1
|
|
printf "[FAIL]\n"
|
|
if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
|
|
printf "\nHit enter to continue, 'q' to quit\n"
|
|
read a
|
|
if [ "$a" = "q" ]; then
|
|
exit 1
|
|
fi
|
|
fi
|
|
fi
|
|
}
|
|
|
|
# Run reachability tests
|
|
#
|
|
# Parameters:
|
|
#
|
|
# * $1: human readable string describing the underlay protocol.
|
|
#
|
|
# $IPV4, $IPV6, $MPLS_UC and $MULTIPROTO are inherited from the calling
|
|
# function.
|
|
#
|
|
ping_test()
|
|
{
|
|
local UNDERLAY="$1"; readonly UNDERLAY
|
|
local MODE
|
|
local MSG
|
|
|
|
if [ "${MULTIPROTO}" = "multiproto" ]; then
|
|
MODE=" (multiproto mode)"
|
|
else
|
|
MODE=""
|
|
fi
|
|
|
|
if [ $IPV4 ]; then
|
|
ping_test_one "ping" "192.0.2.103" "IPv4 packets over ${UNDERLAY}${MODE}"
|
|
fi
|
|
if [ $IPV6 ]; then
|
|
ping_test_one "${PING6}" "2001:db8::103" "IPv6 packets over ${UNDERLAY}${MODE}"
|
|
fi
|
|
if [ $MPLS_UC ]; then
|
|
ping_test_one "${PING6}" "2001:db8::203" "Unicast MPLS packets over ${UNDERLAY}${MODE}"
|
|
fi
|
|
}
|
|
|
|
# Set up a bareudp overlay and run reachability tests over IPv4 and IPv6
|
|
#
|
|
# Parameters:
|
|
#
|
|
# * $1: the packet type (protocol) to be handled by bareudp,
|
|
# * $2: a flag to activate or deactivate bareudp's "multiproto" mode.
|
|
#
|
|
test_overlay()
|
|
{
|
|
local ETHERTYPE="$1"; readonly ETHERTYPE
|
|
local MULTIPROTO="$2"; readonly MULTIPROTO
|
|
local IPV4
|
|
local IPV6
|
|
local MPLS_UC
|
|
|
|
case "${ETHERTYPE}" in
|
|
"ipv4")
|
|
IPV4="ipv4"
|
|
if [ "${MULTIPROTO}" = "multiproto" ]; then
|
|
IPV6="ipv6"
|
|
else
|
|
IPV6=""
|
|
fi
|
|
MPLS_UC=""
|
|
;;
|
|
"ipv6")
|
|
IPV6="ipv6"
|
|
IPV4=""
|
|
MPLS_UC=""
|
|
;;
|
|
"mpls_uc")
|
|
MPLS_UC="mpls_uc"
|
|
IPV4=""
|
|
IPV6=""
|
|
;;
|
|
*)
|
|
exit 1
|
|
;;
|
|
esac
|
|
readonly IPV4
|
|
readonly IPV6
|
|
readonly MPLS_UC
|
|
|
|
# Create the bareudp devices in the intermediate namespaces
|
|
ip -netns "${NS1}" link add name bareudp_ns1 up type bareudp dstport 6635 ethertype "${ETHERTYPE}" "${MULTIPROTO}"
|
|
ip -netns "${NS2}" link add name bareudp_ns2 up type bareudp dstport 6635 ethertype "${ETHERTYPE}" "${MULTIPROTO}"
|
|
|
|
# IPv4 over UDPv4
|
|
if [ $IPV4 ]; then
|
|
# Encapsulation instructions for bareudp over IPv4
|
|
tc -netns "${NS1}" filter add dev veth10 ingress protocol ipv4 \
|
|
flower dst_ip 192.0.2.103/32 \
|
|
action tunnel_key set src_ip 192.0.2.21 dst_ip 192.0.2.22 id 0 \
|
|
action mirred egress redirect dev bareudp_ns1
|
|
tc -netns "${NS2}" filter add dev veth23 ingress protocol ipv4 \
|
|
flower dst_ip 192.0.2.100/32 \
|
|
action tunnel_key set src_ip 192.0.2.22 dst_ip 192.0.2.21 id 0 \
|
|
action mirred egress redirect dev bareudp_ns2
|
|
fi
|
|
|
|
# IPv6 over UDPv4
|
|
if [ $IPV6 ]; then
|
|
# Encapsulation instructions for bareudp over IPv4
|
|
tc -netns "${NS1}" filter add dev veth10 ingress protocol ipv6 \
|
|
flower dst_ip 2001:db8::103/128 \
|
|
action tunnel_key set src_ip 192.0.2.21 dst_ip 192.0.2.22 id 0 \
|
|
action mirred egress redirect dev bareudp_ns1
|
|
tc -netns "${NS2}" filter add dev veth23 ingress protocol ipv6 \
|
|
flower dst_ip 2001:db8::100/128 \
|
|
action tunnel_key set src_ip 192.0.2.22 dst_ip 192.0.2.21 id 0 \
|
|
action mirred egress redirect dev bareudp_ns2
|
|
fi
|
|
|
|
# MPLS (unicast) over UDPv4
|
|
if [ $MPLS_UC ]; then
|
|
ip netns exec "${NS1}" sysctl -qw net.mpls.conf.bareudp_ns1.input=1
|
|
ip netns exec "${NS2}" sysctl -qw net.mpls.conf.bareudp_ns2.input=1
|
|
|
|
# Encapsulation instructions for bareudp over IPv4
|
|
tc -netns "${NS1}" filter add dev veth10 ingress protocol mpls_uc \
|
|
flower mpls_label 203 \
|
|
action tunnel_key set src_ip 192.0.2.21 dst_ip 192.0.2.22 id 0 \
|
|
action mirred egress redirect dev bareudp_ns1
|
|
tc -netns "${NS2}" filter add dev veth23 ingress protocol mpls_uc \
|
|
flower mpls_label 200 \
|
|
action tunnel_key set src_ip 192.0.2.22 dst_ip 192.0.2.21 id 0 \
|
|
action mirred egress redirect dev bareudp_ns2
|
|
fi
|
|
|
|
# Test IPv4 underlay
|
|
ping_test "UDPv4"
|
|
|
|
# Cleanup bareudp encapsulation instructions, as they were specific to
|
|
# the IPv4 underlay, before setting up and testing the IPv6 underlay
|
|
tc -netns "${NS1}" filter delete dev veth10 ingress
|
|
tc -netns "${NS2}" filter delete dev veth23 ingress
|
|
|
|
# IPv4 over UDPv6
|
|
if [ $IPV4 ]; then
|
|
# New encapsulation instructions for bareudp over IPv6
|
|
tc -netns "${NS1}" filter add dev veth10 ingress protocol ipv4 \
|
|
flower dst_ip 192.0.2.103/32 \
|
|
action tunnel_key set src_ip 2001:db8::21 dst_ip 2001:db8::22 id 0 \
|
|
action mirred egress redirect dev bareudp_ns1
|
|
tc -netns "${NS2}" filter add dev veth23 ingress protocol ipv4 \
|
|
flower dst_ip 192.0.2.100/32 \
|
|
action tunnel_key set src_ip 2001:db8::22 dst_ip 2001:db8::21 id 0 \
|
|
action mirred egress redirect dev bareudp_ns2
|
|
fi
|
|
|
|
# IPv6 over UDPv6
|
|
if [ $IPV6 ]; then
|
|
# New encapsulation instructions for bareudp over IPv6
|
|
tc -netns "${NS1}" filter add dev veth10 ingress protocol ipv6 \
|
|
flower dst_ip 2001:db8::103/128 \
|
|
action tunnel_key set src_ip 2001:db8::21 dst_ip 2001:db8::22 id 0 \
|
|
action mirred egress redirect dev bareudp_ns1
|
|
tc -netns "${NS2}" filter add dev veth23 ingress protocol ipv6 \
|
|
flower dst_ip 2001:db8::100/128 \
|
|
action tunnel_key set src_ip 2001:db8::22 dst_ip 2001:db8::21 id 0 \
|
|
action mirred egress redirect dev bareudp_ns2
|
|
fi
|
|
|
|
# MPLS (unicast) over UDPv6
|
|
if [ $MPLS_UC ]; then
|
|
# New encapsulation instructions for bareudp over IPv6
|
|
tc -netns "${NS1}" filter add dev veth10 ingress protocol mpls_uc \
|
|
flower mpls_label 203 \
|
|
action tunnel_key set src_ip 2001:db8::21 dst_ip 2001:db8::22 id 0 \
|
|
action mirred egress redirect dev bareudp_ns1
|
|
tc -netns "${NS2}" filter add dev veth23 ingress protocol mpls_uc \
|
|
flower mpls_label 200 \
|
|
action tunnel_key set src_ip 2001:db8::22 dst_ip 2001:db8::21 id 0 \
|
|
action mirred egress redirect dev bareudp_ns2
|
|
fi
|
|
|
|
# Test IPv6 underlay
|
|
ping_test "UDPv6"
|
|
|
|
tc -netns "${NS1}" filter delete dev veth10 ingress
|
|
tc -netns "${NS2}" filter delete dev veth23 ingress
|
|
ip -netns "${NS1}" link delete bareudp_ns1
|
|
ip -netns "${NS2}" link delete bareudp_ns2
|
|
}
|
|
|
|
check_features()
|
|
{
|
|
ip link help 2>&1 | grep -q bareudp
|
|
if [ $? -ne 0 ]; then
|
|
echo "Missing bareudp support in iproute2" >&2
|
|
exit_cleanup
|
|
fi
|
|
|
|
# Use ping6 on systems where ping doesn't handle IPv6
|
|
ping -w 1 -c 1 ::1 > /dev/null 2>&1 || PING6="ping6"
|
|
}
|
|
|
|
usage()
|
|
{
|
|
echo "Usage: $0 [-p]"
|
|
exit 1
|
|
}
|
|
|
|
while getopts :p o
|
|
do
|
|
case $o in
|
|
p) PAUSE_ON_FAIL="yes";;
|
|
*) usage;;
|
|
esac
|
|
done
|
|
|
|
check_features
|
|
|
|
# Create namespaces before setting up the exit trap.
|
|
# Otherwise, exit_cleanup_all() could delete namespaces that were not created
|
|
# by this script.
|
|
create_namespaces
|
|
|
|
set -e
|
|
trap exit_cleanup_all EXIT
|
|
|
|
setup_underlay
|
|
setup_overlay_ipv4
|
|
setup_overlay_ipv6
|
|
setup_overlay_mpls
|
|
|
|
test_overlay ipv4 nomultiproto
|
|
test_overlay ipv6 nomultiproto
|
|
test_overlay ipv4 multiproto
|
|
test_overlay mpls_uc nomultiproto
|
|
|
|
if [ "${ERR}" -eq 1 ]; then
|
|
echo "Some tests failed." >&2
|
|
else
|
|
ERR=0
|
|
fi
|