Stefan-Gabriel Mirea d466d3c121 iio: adc: vf610_adc: Fix VALT selection value for REFSEL bits ... In order to select the alternate voltage reference pair (VALTH/VALTL), the right value for the REFSEL field in the ADCx_CFG register is "01", leading to 0x800 as register mask. See section 8.2.6.4 in the reference manual[1]. [1] http://www.nxp.com/docs/en/reference-manual/VFXXXRM.pdf Fixes: a775427632 ("iio:adc:imx: add Freescale Vybrid vf610 adc driver") Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>		2017-07-06 19:39:28 +01:00
..
accel	iio: accel: st_accel: add SPI-3wire support	2017-07-06 19:32:29 +01:00
adc	iio: adc: vf610_adc: Fix VALT selection value for REFSEL bits	2017-07-06 19:39:28 +01:00
amplifiers	spi: Updates for v4.4	2015-11-05 13:15:12 -08:00
buffer	iio: buffer-dmaengine: Add missing header buffer_impl.h	2017-06-13 20:56:05 +01:00
chemical	drivers: iio: chemical: replace comma with a semicolon	2017-03-30 19:13:23 +01:00
common	iio: accel: st_accel: add SPI-3wire support	2017-07-06 19:32:29 +01:00
counter	iio: pc104: Mask PC/104 drivers via the PC104 Kconfig option	2017-03-15 21:59:08 +00:00
dac	Annotation of module parameters that specify device settings	2017-05-10 19:13:03 -07:00
dummy	iio:dummy: Stop enabling timestamp by default.	2017-01-10 19:54:55 +00:00
frequency	iio: frequency: ad9523: use unsigned int rather then bare unsigned	2016-04-17 10:31:03 +01:00
gyro	Fourth set of IIO new device support, features and cleanups for the 4.12 cycle	2017-04-18 17:13:31 +02:00
health	First set of IIO new device support, features and cleanup for the 4.12 cycle.	2017-03-06 13:17:21 +01:00
humidity	iio: humidity: hts221: Remove unnecessary cast on void pointer	2017-04-02 09:50:32 +01:00
imu	iio: imu: inv_mpu6050: add accel lpf setting for chip >= MPU6500	2017-06-03 09:40:40 +01:00
light	iio: light: tsl2563: use correct event code	2017-06-24 20:42:49 +01:00
magnetometer	Merge 4.11-rc4 into staging-next	2017-03-27 09:11:25 +02:00
orientation	iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)	2016-11-05 17:47:47 +00:00
potentiometer	iio: max5481: Add support for Maxim digital potentiometers	2017-01-28 12:13:31 +00:00
potentiostat	iio: lmp91000: Set parent device	2017-02-19 12:01:52 +00:00
pressure	iio: pressure: st_pressure_core: disable multiread by default for LPS22HB	2017-06-24 20:46:25 +01:00
proximity	iio: proximity: as3935: fix iio_trigger_poll issue	2017-05-07 13:21:55 +01:00
temperature	iio: mlx96014: Add OF device ID table	2017-03-19 10:49:24 +00:00
trigger	Fifth set of IIO fixes for the 4.11 cycle.	2017-04-18 19:38:38 +02:00
iio_core_trigger.h
iio_core.h	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-buffer.c	sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>	2017-03-02 08:42:32 +01:00
industrialio-configfs.c	iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem	2015-12-05 16:25:30 +00:00
industrialio-core.c	char/misc patches for 4.12-rc1	2017-05-04 19:15:35 -07:00
industrialio-event.c	iio: iio_push_event(): Don't crash if the event interface is not registered	2016-09-10 16:40:44 +01:00
industrialio-sw-device.c	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c	iio: core: fix ptr_ret.cocci warnings	2016-01-20 17:09:18 -08:00
industrialio-trigger.c	iio: trigger: fix NULL pointer dereference in iio_trigger_write_current()	2017-05-21 12:36:59 +01:00
industrialio-triggered-event.c
inkern.c	iio: inkern: pass through raw values if no scaling	2017-01-14 12:20:18 +00:00
Kconfig	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00
Makefile	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00