mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-17 01:04:19 +08:00
23ec8eaf46
The variable r is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
306 lines
6.9 KiB
C
306 lines
6.9 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* I2C Link Layer for ST NCI NFC controller familly based Driver
|
|
* Copyright (C) 2014-2015 STMicroelectronics SAS. All rights reserved.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/nfc.h>
|
|
#include <linux/of.h>
|
|
|
|
#include "st-nci.h"
|
|
|
|
#define DRIVER_DESC "NCI NFC driver for ST_NCI"
|
|
|
|
/* ndlc header */
|
|
#define ST_NCI_FRAME_HEADROOM 1
|
|
#define ST_NCI_FRAME_TAILROOM 0
|
|
|
|
#define ST_NCI_I2C_MIN_SIZE 4 /* PCB(1) + NCI Packet header(3) */
|
|
#define ST_NCI_I2C_MAX_SIZE 250 /* req 4.2.1 */
|
|
|
|
#define ST_NCI_DRIVER_NAME "st_nci"
|
|
#define ST_NCI_I2C_DRIVER_NAME "st_nci_i2c"
|
|
|
|
struct st_nci_i2c_phy {
|
|
struct i2c_client *i2c_dev;
|
|
struct llt_ndlc *ndlc;
|
|
|
|
bool irq_active;
|
|
|
|
struct gpio_desc *gpiod_reset;
|
|
|
|
struct st_nci_se_status se_status;
|
|
};
|
|
|
|
static int st_nci_i2c_enable(void *phy_id)
|
|
{
|
|
struct st_nci_i2c_phy *phy = phy_id;
|
|
|
|
gpiod_set_value(phy->gpiod_reset, 0);
|
|
usleep_range(10000, 15000);
|
|
gpiod_set_value(phy->gpiod_reset, 1);
|
|
usleep_range(80000, 85000);
|
|
|
|
if (phy->ndlc->powered == 0 && phy->irq_active == 0) {
|
|
enable_irq(phy->i2c_dev->irq);
|
|
phy->irq_active = true;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void st_nci_i2c_disable(void *phy_id)
|
|
{
|
|
struct st_nci_i2c_phy *phy = phy_id;
|
|
|
|
disable_irq_nosync(phy->i2c_dev->irq);
|
|
phy->irq_active = false;
|
|
}
|
|
|
|
/*
|
|
* Writing a frame must not return the number of written bytes.
|
|
* It must return either zero for success, or <0 for error.
|
|
* In addition, it must not alter the skb
|
|
*/
|
|
static int st_nci_i2c_write(void *phy_id, struct sk_buff *skb)
|
|
{
|
|
int r;
|
|
struct st_nci_i2c_phy *phy = phy_id;
|
|
struct i2c_client *client = phy->i2c_dev;
|
|
|
|
if (phy->ndlc->hard_fault != 0)
|
|
return phy->ndlc->hard_fault;
|
|
|
|
r = i2c_master_send(client, skb->data, skb->len);
|
|
if (r < 0) { /* Retry, chip was in standby */
|
|
usleep_range(1000, 4000);
|
|
r = i2c_master_send(client, skb->data, skb->len);
|
|
}
|
|
|
|
if (r >= 0) {
|
|
if (r != skb->len)
|
|
r = -EREMOTEIO;
|
|
else
|
|
r = 0;
|
|
}
|
|
|
|
return r;
|
|
}
|
|
|
|
/*
|
|
* Reads an ndlc frame and returns it in a newly allocated sk_buff.
|
|
* returns:
|
|
* 0 : if received frame is complete
|
|
* -EREMOTEIO : i2c read error (fatal)
|
|
* -EBADMSG : frame was incorrect and discarded
|
|
* -ENOMEM : cannot allocate skb, frame dropped
|
|
*/
|
|
static int st_nci_i2c_read(struct st_nci_i2c_phy *phy,
|
|
struct sk_buff **skb)
|
|
{
|
|
int r;
|
|
u8 len;
|
|
u8 buf[ST_NCI_I2C_MAX_SIZE];
|
|
struct i2c_client *client = phy->i2c_dev;
|
|
|
|
r = i2c_master_recv(client, buf, ST_NCI_I2C_MIN_SIZE);
|
|
if (r < 0) { /* Retry, chip was in standby */
|
|
usleep_range(1000, 4000);
|
|
r = i2c_master_recv(client, buf, ST_NCI_I2C_MIN_SIZE);
|
|
}
|
|
|
|
if (r != ST_NCI_I2C_MIN_SIZE)
|
|
return -EREMOTEIO;
|
|
|
|
len = be16_to_cpu(*(__be16 *) (buf + 2));
|
|
if (len > ST_NCI_I2C_MAX_SIZE) {
|
|
nfc_err(&client->dev, "invalid frame len\n");
|
|
return -EBADMSG;
|
|
}
|
|
|
|
*skb = alloc_skb(ST_NCI_I2C_MIN_SIZE + len, GFP_KERNEL);
|
|
if (*skb == NULL)
|
|
return -ENOMEM;
|
|
|
|
skb_reserve(*skb, ST_NCI_I2C_MIN_SIZE);
|
|
skb_put(*skb, ST_NCI_I2C_MIN_SIZE);
|
|
memcpy((*skb)->data, buf, ST_NCI_I2C_MIN_SIZE);
|
|
|
|
if (!len)
|
|
return 0;
|
|
|
|
r = i2c_master_recv(client, buf, len);
|
|
if (r != len) {
|
|
kfree_skb(*skb);
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
skb_put(*skb, len);
|
|
memcpy((*skb)->data + ST_NCI_I2C_MIN_SIZE, buf, len);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Reads an ndlc frame from the chip.
|
|
*
|
|
* On ST_NCI, IRQ goes in idle state when read starts.
|
|
*/
|
|
static irqreturn_t st_nci_irq_thread_fn(int irq, void *phy_id)
|
|
{
|
|
struct st_nci_i2c_phy *phy = phy_id;
|
|
struct i2c_client *client;
|
|
struct sk_buff *skb = NULL;
|
|
int r;
|
|
|
|
if (!phy || !phy->ndlc || irq != phy->i2c_dev->irq) {
|
|
WARN_ON_ONCE(1);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
client = phy->i2c_dev;
|
|
dev_dbg(&client->dev, "IRQ\n");
|
|
|
|
if (phy->ndlc->hard_fault)
|
|
return IRQ_HANDLED;
|
|
|
|
if (!phy->ndlc->powered) {
|
|
st_nci_i2c_disable(phy);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
r = st_nci_i2c_read(phy, &skb);
|
|
if (r == -EREMOTEIO || r == -ENOMEM || r == -EBADMSG)
|
|
return IRQ_HANDLED;
|
|
|
|
ndlc_recv(phy->ndlc, skb);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct nfc_phy_ops i2c_phy_ops = {
|
|
.write = st_nci_i2c_write,
|
|
.enable = st_nci_i2c_enable,
|
|
.disable = st_nci_i2c_disable,
|
|
};
|
|
|
|
static const struct acpi_gpio_params reset_gpios = { 1, 0, false };
|
|
|
|
static const struct acpi_gpio_mapping acpi_st_nci_gpios[] = {
|
|
{ "reset-gpios", &reset_gpios, 1 },
|
|
{},
|
|
};
|
|
|
|
static int st_nci_i2c_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct st_nci_i2c_phy *phy;
|
|
int r;
|
|
|
|
dev_dbg(&client->dev, "%s\n", __func__);
|
|
dev_dbg(&client->dev, "IRQ: %d\n", client->irq);
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
|
|
nfc_err(&client->dev, "Need I2C_FUNC_I2C\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
phy = devm_kzalloc(dev, sizeof(struct st_nci_i2c_phy), GFP_KERNEL);
|
|
if (!phy)
|
|
return -ENOMEM;
|
|
|
|
phy->i2c_dev = client;
|
|
|
|
i2c_set_clientdata(client, phy);
|
|
|
|
r = devm_acpi_dev_add_driver_gpios(dev, acpi_st_nci_gpios);
|
|
if (r)
|
|
dev_dbg(dev, "Unable to add GPIO mapping table\n");
|
|
|
|
/* Get RESET GPIO */
|
|
phy->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(phy->gpiod_reset)) {
|
|
nfc_err(dev, "Unable to get RESET GPIO\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
phy->se_status.is_ese_present =
|
|
device_property_read_bool(dev, "ese-present");
|
|
phy->se_status.is_uicc_present =
|
|
device_property_read_bool(dev, "uicc-present");
|
|
|
|
r = ndlc_probe(phy, &i2c_phy_ops, &client->dev,
|
|
ST_NCI_FRAME_HEADROOM, ST_NCI_FRAME_TAILROOM,
|
|
&phy->ndlc, &phy->se_status);
|
|
if (r < 0) {
|
|
nfc_err(&client->dev, "Unable to register ndlc layer\n");
|
|
return r;
|
|
}
|
|
|
|
phy->irq_active = true;
|
|
r = devm_request_threaded_irq(&client->dev, client->irq, NULL,
|
|
st_nci_irq_thread_fn,
|
|
IRQF_ONESHOT,
|
|
ST_NCI_DRIVER_NAME, phy);
|
|
if (r < 0)
|
|
nfc_err(&client->dev, "Unable to register IRQ handler\n");
|
|
|
|
return r;
|
|
}
|
|
|
|
static int st_nci_i2c_remove(struct i2c_client *client)
|
|
{
|
|
struct st_nci_i2c_phy *phy = i2c_get_clientdata(client);
|
|
|
|
dev_dbg(&client->dev, "%s\n", __func__);
|
|
|
|
ndlc_remove(phy->ndlc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id st_nci_i2c_id_table[] = {
|
|
{ST_NCI_DRIVER_NAME, 0},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, st_nci_i2c_id_table);
|
|
|
|
static const struct acpi_device_id st_nci_i2c_acpi_match[] = {
|
|
{"SMO2101"},
|
|
{"SMO2102"},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, st_nci_i2c_acpi_match);
|
|
|
|
static const struct of_device_id of_st_nci_i2c_match[] = {
|
|
{ .compatible = "st,st21nfcb-i2c", },
|
|
{ .compatible = "st,st21nfcb_i2c", },
|
|
{ .compatible = "st,st21nfcc-i2c", },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, of_st_nci_i2c_match);
|
|
|
|
static struct i2c_driver st_nci_i2c_driver = {
|
|
.driver = {
|
|
.name = ST_NCI_I2C_DRIVER_NAME,
|
|
.of_match_table = of_match_ptr(of_st_nci_i2c_match),
|
|
.acpi_match_table = ACPI_PTR(st_nci_i2c_acpi_match),
|
|
},
|
|
.probe = st_nci_i2c_probe,
|
|
.id_table = st_nci_i2c_id_table,
|
|
.remove = st_nci_i2c_remove,
|
|
};
|
|
module_i2c_driver(st_nci_i2c_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|