mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-17 01:04:19 +08:00
b24413180f
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
424 lines
13 KiB
C
424 lines
13 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/* $Id: aty128.h,v 1.1 1999/10/12 11:00:40 geert Exp $
|
|
* linux/drivers/video/aty128.h
|
|
* Register definitions for ATI Rage128 boards
|
|
*
|
|
* Anthony Tong <atong@uiuc.edu>, 1999
|
|
* Brad Douglas <brad@neruo.com>, 2000
|
|
*/
|
|
|
|
#ifndef REG_RAGE128_H
|
|
#define REG_RAGE128_H
|
|
|
|
#define CLOCK_CNTL_INDEX 0x0008
|
|
#define CLOCK_CNTL_DATA 0x000c
|
|
#define BIOS_0_SCRATCH 0x0010
|
|
#define BUS_CNTL 0x0030
|
|
#define BUS_CNTL1 0x0034
|
|
#define GEN_INT_CNTL 0x0040
|
|
#define CRTC_GEN_CNTL 0x0050
|
|
#define CRTC_EXT_CNTL 0x0054
|
|
#define DAC_CNTL 0x0058
|
|
#define I2C_CNTL_1 0x0094
|
|
#define PALETTE_INDEX 0x00b0
|
|
#define PALETTE_DATA 0x00b4
|
|
#define CNFG_CNTL 0x00e0
|
|
#define GEN_RESET_CNTL 0x00f0
|
|
#define CNFG_MEMSIZE 0x00f8
|
|
#define MEM_CNTL 0x0140
|
|
#define MEM_POWER_MISC 0x015c
|
|
#define AGP_BASE 0x0170
|
|
#define AGP_CNTL 0x0174
|
|
#define AGP_APER_OFFSET 0x0178
|
|
#define PCI_GART_PAGE 0x017c
|
|
#define PC_NGUI_MODE 0x0180
|
|
#define PC_NGUI_CTLSTAT 0x0184
|
|
#define MPP_TB_CONFIG 0x01C0
|
|
#define MPP_GP_CONFIG 0x01C8
|
|
#define VIPH_CONTROL 0x01D0
|
|
#define CRTC_H_TOTAL_DISP 0x0200
|
|
#define CRTC_H_SYNC_STRT_WID 0x0204
|
|
#define CRTC_V_TOTAL_DISP 0x0208
|
|
#define CRTC_V_SYNC_STRT_WID 0x020c
|
|
#define CRTC_VLINE_CRNT_VLINE 0x0210
|
|
#define CRTC_CRNT_FRAME 0x0214
|
|
#define CRTC_GUI_TRIG_VLINE 0x0218
|
|
#define CRTC_OFFSET 0x0224
|
|
#define CRTC_OFFSET_CNTL 0x0228
|
|
#define CRTC_PITCH 0x022c
|
|
#define OVR_CLR 0x0230
|
|
#define OVR_WID_LEFT_RIGHT 0x0234
|
|
#define OVR_WID_TOP_BOTTOM 0x0238
|
|
#define LVDS_GEN_CNTL 0x02d0
|
|
#define DDA_CONFIG 0x02e0
|
|
#define DDA_ON_OFF 0x02e4
|
|
#define VGA_DDA_CONFIG 0x02e8
|
|
#define VGA_DDA_ON_OFF 0x02ec
|
|
#define CRTC2_H_TOTAL_DISP 0x0300
|
|
#define CRTC2_H_SYNC_STRT_WID 0x0304
|
|
#define CRTC2_V_TOTAL_DISP 0x0308
|
|
#define CRTC2_V_SYNC_STRT_WID 0x030c
|
|
#define CRTC2_VLINE_CRNT_VLINE 0x0310
|
|
#define CRTC2_CRNT_FRAME 0x0314
|
|
#define CRTC2_GUI_TRIG_VLINE 0x0318
|
|
#define CRTC2_OFFSET 0x0324
|
|
#define CRTC2_OFFSET_CNTL 0x0328
|
|
#define CRTC2_PITCH 0x032c
|
|
#define DDA2_CONFIG 0x03e0
|
|
#define DDA2_ON_OFF 0x03e4
|
|
#define CRTC2_GEN_CNTL 0x03f8
|
|
#define CRTC2_STATUS 0x03fc
|
|
#define OV0_SCALE_CNTL 0x0420
|
|
#define SUBPIC_CNTL 0x0540
|
|
#define PM4_BUFFER_OFFSET 0x0700
|
|
#define PM4_BUFFER_CNTL 0x0704
|
|
#define PM4_BUFFER_WM_CNTL 0x0708
|
|
#define PM4_BUFFER_DL_RPTR_ADDR 0x070c
|
|
#define PM4_BUFFER_DL_RPTR 0x0710
|
|
#define PM4_BUFFER_DL_WPTR 0x0714
|
|
#define PM4_VC_FPU_SETUP 0x071c
|
|
#define PM4_FPU_CNTL 0x0720
|
|
#define PM4_VC_FORMAT 0x0724
|
|
#define PM4_VC_CNTL 0x0728
|
|
#define PM4_VC_I01 0x072c
|
|
#define PM4_VC_VLOFF 0x0730
|
|
#define PM4_VC_VLSIZE 0x0734
|
|
#define PM4_IW_INDOFF 0x0738
|
|
#define PM4_IW_INDSIZE 0x073c
|
|
#define PM4_FPU_FPX0 0x0740
|
|
#define PM4_FPU_FPY0 0x0744
|
|
#define PM4_FPU_FPX1 0x0748
|
|
#define PM4_FPU_FPY1 0x074c
|
|
#define PM4_FPU_FPX2 0x0750
|
|
#define PM4_FPU_FPY2 0x0754
|
|
#define PM4_FPU_FPY3 0x0758
|
|
#define PM4_FPU_FPY4 0x075c
|
|
#define PM4_FPU_FPY5 0x0760
|
|
#define PM4_FPU_FPY6 0x0764
|
|
#define PM4_FPU_FPR 0x0768
|
|
#define PM4_FPU_FPG 0x076c
|
|
#define PM4_FPU_FPB 0x0770
|
|
#define PM4_FPU_FPA 0x0774
|
|
#define PM4_FPU_INTXY0 0x0780
|
|
#define PM4_FPU_INTXY1 0x0784
|
|
#define PM4_FPU_INTXY2 0x0788
|
|
#define PM4_FPU_INTARGB 0x078c
|
|
#define PM4_FPU_FPTWICEAREA 0x0790
|
|
#define PM4_FPU_DMAJOR01 0x0794
|
|
#define PM4_FPU_DMAJOR12 0x0798
|
|
#define PM4_FPU_DMAJOR02 0x079c
|
|
#define PM4_FPU_STAT 0x07a0
|
|
#define PM4_STAT 0x07b8
|
|
#define PM4_TEST_CNTL 0x07d0
|
|
#define PM4_MICROCODE_ADDR 0x07d4
|
|
#define PM4_MICROCODE_RADDR 0x07d8
|
|
#define PM4_MICROCODE_DATAH 0x07dc
|
|
#define PM4_MICROCODE_DATAL 0x07e0
|
|
#define PM4_CMDFIFO_ADDR 0x07e4
|
|
#define PM4_CMDFIFO_DATAH 0x07e8
|
|
#define PM4_CMDFIFO_DATAL 0x07ec
|
|
#define PM4_BUFFER_ADDR 0x07f0
|
|
#define PM4_BUFFER_DATAH 0x07f4
|
|
#define PM4_BUFFER_DATAL 0x07f8
|
|
#define PM4_MICRO_CNTL 0x07fc
|
|
#define CAP0_TRIG_CNTL 0x0950
|
|
#define CAP1_TRIG_CNTL 0x09c0
|
|
|
|
/******************************************************************************
|
|
* GUI Block Memory Mapped Registers *
|
|
* These registers are FIFOed. *
|
|
*****************************************************************************/
|
|
#define PM4_FIFO_DATA_EVEN 0x1000
|
|
#define PM4_FIFO_DATA_ODD 0x1004
|
|
|
|
#define DST_OFFSET 0x1404
|
|
#define DST_PITCH 0x1408
|
|
#define DST_WIDTH 0x140c
|
|
#define DST_HEIGHT 0x1410
|
|
#define SRC_X 0x1414
|
|
#define SRC_Y 0x1418
|
|
#define DST_X 0x141c
|
|
#define DST_Y 0x1420
|
|
#define SRC_PITCH_OFFSET 0x1428
|
|
#define DST_PITCH_OFFSET 0x142c
|
|
#define SRC_Y_X 0x1434
|
|
#define DST_Y_X 0x1438
|
|
#define DST_HEIGHT_WIDTH 0x143c
|
|
#define DP_GUI_MASTER_CNTL 0x146c
|
|
#define BRUSH_SCALE 0x1470
|
|
#define BRUSH_Y_X 0x1474
|
|
#define DP_BRUSH_BKGD_CLR 0x1478
|
|
#define DP_BRUSH_FRGD_CLR 0x147c
|
|
#define DST_WIDTH_X 0x1588
|
|
#define DST_HEIGHT_WIDTH_8 0x158c
|
|
#define SRC_X_Y 0x1590
|
|
#define DST_X_Y 0x1594
|
|
#define DST_WIDTH_HEIGHT 0x1598
|
|
#define DST_WIDTH_X_INCY 0x159c
|
|
#define DST_HEIGHT_Y 0x15a0
|
|
#define DST_X_SUB 0x15a4
|
|
#define DST_Y_SUB 0x15a8
|
|
#define SRC_OFFSET 0x15ac
|
|
#define SRC_PITCH 0x15b0
|
|
#define DST_HEIGHT_WIDTH_BW 0x15b4
|
|
#define CLR_CMP_CNTL 0x15c0
|
|
#define CLR_CMP_CLR_SRC 0x15c4
|
|
#define CLR_CMP_CLR_DST 0x15c8
|
|
#define CLR_CMP_MASK 0x15cc
|
|
#define DP_SRC_FRGD_CLR 0x15d8
|
|
#define DP_SRC_BKGD_CLR 0x15dc
|
|
#define DST_BRES_ERR 0x1628
|
|
#define DST_BRES_INC 0x162c
|
|
#define DST_BRES_DEC 0x1630
|
|
#define DST_BRES_LNTH 0x1634
|
|
#define DST_BRES_LNTH_SUB 0x1638
|
|
#define SC_LEFT 0x1640
|
|
#define SC_RIGHT 0x1644
|
|
#define SC_TOP 0x1648
|
|
#define SC_BOTTOM 0x164c
|
|
#define SRC_SC_RIGHT 0x1654
|
|
#define SRC_SC_BOTTOM 0x165c
|
|
#define GUI_DEBUG0 0x16a0
|
|
#define GUI_DEBUG1 0x16a4
|
|
#define GUI_TIMEOUT 0x16b0
|
|
#define GUI_TIMEOUT0 0x16b4
|
|
#define GUI_TIMEOUT1 0x16b8
|
|
#define GUI_PROBE 0x16bc
|
|
#define DP_CNTL 0x16c0
|
|
#define DP_DATATYPE 0x16c4
|
|
#define DP_MIX 0x16c8
|
|
#define DP_WRITE_MASK 0x16cc
|
|
#define DP_CNTL_XDIR_YDIR_YMAJOR 0x16d0
|
|
#define DEFAULT_OFFSET 0x16e0
|
|
#define DEFAULT_PITCH 0x16e4
|
|
#define DEFAULT_SC_BOTTOM_RIGHT 0x16e8
|
|
#define SC_TOP_LEFT 0x16ec
|
|
#define SC_BOTTOM_RIGHT 0x16f0
|
|
#define SRC_SC_BOTTOM_RIGHT 0x16f4
|
|
#define WAIT_UNTIL 0x1720
|
|
#define CACHE_CNTL 0x1724
|
|
#define GUI_STAT 0x1740
|
|
#define PC_GUI_MODE 0x1744
|
|
#define PC_GUI_CTLSTAT 0x1748
|
|
#define PC_DEBUG_MODE 0x1760
|
|
#define BRES_DST_ERR_DEC 0x1780
|
|
#define TRAIL_BRES_T12_ERR_DEC 0x1784
|
|
#define TRAIL_BRES_T12_INC 0x1788
|
|
#define DP_T12_CNTL 0x178c
|
|
#define DST_BRES_T1_LNTH 0x1790
|
|
#define DST_BRES_T2_LNTH 0x1794
|
|
#define SCALE_SRC_HEIGHT_WIDTH 0x1994
|
|
#define SCALE_OFFSET_0 0x1998
|
|
#define SCALE_PITCH 0x199c
|
|
#define SCALE_X_INC 0x19a0
|
|
#define SCALE_Y_INC 0x19a4
|
|
#define SCALE_HACC 0x19a8
|
|
#define SCALE_VACC 0x19ac
|
|
#define SCALE_DST_X_Y 0x19b0
|
|
#define SCALE_DST_HEIGHT_WIDTH 0x19b4
|
|
#define SCALE_3D_CNTL 0x1a00
|
|
#define SCALE_3D_DATATYPE 0x1a20
|
|
#define SETUP_CNTL 0x1bc4
|
|
#define SOLID_COLOR 0x1bc8
|
|
#define WINDOW_XY_OFFSET 0x1bcc
|
|
#define DRAW_LINE_POINT 0x1bd0
|
|
#define SETUP_CNTL_PM4 0x1bd4
|
|
#define DST_PITCH_OFFSET_C 0x1c80
|
|
#define DP_GUI_MASTER_CNTL_C 0x1c84
|
|
#define SC_TOP_LEFT_C 0x1c88
|
|
#define SC_BOTTOM_RIGHT_C 0x1c8c
|
|
|
|
#define CLR_CMP_MASK_3D 0x1A28
|
|
#define MISC_3D_STATE_CNTL_REG 0x1CA0
|
|
#define MC_SRC1_CNTL 0x19D8
|
|
#define TEX_CNTL 0x1800
|
|
|
|
/* CONSTANTS */
|
|
#define GUI_ACTIVE 0x80000000
|
|
#define ENGINE_IDLE 0x0
|
|
|
|
#define PLL_WR_EN 0x00000080
|
|
|
|
#define CLK_PIN_CNTL 0x0001
|
|
#define PPLL_CNTL 0x0002
|
|
#define PPLL_REF_DIV 0x0003
|
|
#define PPLL_DIV_0 0x0004
|
|
#define PPLL_DIV_1 0x0005
|
|
#define PPLL_DIV_2 0x0006
|
|
#define PPLL_DIV_3 0x0007
|
|
#define VCLK_ECP_CNTL 0x0008
|
|
#define HTOTAL_CNTL 0x0009
|
|
#define X_MPLL_REF_FB_DIV 0x000a
|
|
#define XPLL_CNTL 0x000b
|
|
#define XDLL_CNTL 0x000c
|
|
#define XCLK_CNTL 0x000d
|
|
#define MPLL_CNTL 0x000e
|
|
#define MCLK_CNTL 0x000f
|
|
#define AGP_PLL_CNTL 0x0010
|
|
#define FCP_CNTL 0x0012
|
|
#define PLL_TEST_CNTL 0x0013
|
|
#define P2PLL_CNTL 0x002a
|
|
#define P2PLL_REF_DIV 0x002b
|
|
#define P2PLL_DIV_0 0x002b
|
|
#define POWER_MANAGEMENT 0x002f
|
|
|
|
#define PPLL_RESET 0x01
|
|
#define PPLL_ATOMIC_UPDATE_EN 0x10000
|
|
#define PPLL_VGA_ATOMIC_UPDATE_EN 0x20000
|
|
#define PPLL_REF_DIV_MASK 0x3FF
|
|
#define PPLL_FB3_DIV_MASK 0x7FF
|
|
#define PPLL_POST3_DIV_MASK 0x70000
|
|
#define PPLL_ATOMIC_UPDATE_R 0x8000
|
|
#define PPLL_ATOMIC_UPDATE_W 0x8000
|
|
#define MEM_CFG_TYPE_MASK 0x3
|
|
#define XCLK_SRC_SEL_MASK 0x7
|
|
#define XPLL_FB_DIV_MASK 0xFF00
|
|
#define X_MPLL_REF_DIV_MASK 0xFF
|
|
|
|
/* CRTC control values (CRTC_GEN_CNTL) */
|
|
#define CRTC_CSYNC_EN 0x00000010
|
|
|
|
#define CRTC2_DBL_SCAN_EN 0x00000001
|
|
#define CRTC2_DISPLAY_DIS 0x00800000
|
|
#define CRTC2_FIFO_EXTSENSE 0x00200000
|
|
#define CRTC2_ICON_EN 0x00100000
|
|
#define CRTC2_CUR_EN 0x00010000
|
|
#define CRTC2_EN 0x02000000
|
|
#define CRTC2_DISP_REQ_EN_B 0x04000000
|
|
|
|
#define CRTC_PIX_WIDTH_MASK 0x00000700
|
|
#define CRTC_PIX_WIDTH_4BPP 0x00000100
|
|
#define CRTC_PIX_WIDTH_8BPP 0x00000200
|
|
#define CRTC_PIX_WIDTH_15BPP 0x00000300
|
|
#define CRTC_PIX_WIDTH_16BPP 0x00000400
|
|
#define CRTC_PIX_WIDTH_24BPP 0x00000500
|
|
#define CRTC_PIX_WIDTH_32BPP 0x00000600
|
|
|
|
/* DAC_CNTL bit constants */
|
|
#define DAC_8BIT_EN 0x00000100
|
|
#define DAC_MASK 0xFF000000
|
|
#define DAC_BLANKING 0x00000004
|
|
#define DAC_RANGE_CNTL 0x00000003
|
|
#define DAC_CLK_SEL 0x00000010
|
|
#define DAC_PALETTE_ACCESS_CNTL 0x00000020
|
|
#define DAC_PALETTE2_SNOOP_EN 0x00000040
|
|
#define DAC_PDWN 0x00008000
|
|
|
|
/* CRTC_EXT_CNTL */
|
|
#define CRT_CRTC_ON 0x00008000
|
|
|
|
/* GEN_RESET_CNTL bit constants */
|
|
#define SOFT_RESET_GUI 0x00000001
|
|
#define SOFT_RESET_VCLK 0x00000100
|
|
#define SOFT_RESET_PCLK 0x00000200
|
|
#define SOFT_RESET_ECP 0x00000400
|
|
#define SOFT_RESET_DISPENG_XCLK 0x00000800
|
|
|
|
/* PC_GUI_CTLSTAT bit constants */
|
|
#define PC_BUSY_INIT 0x10000000
|
|
#define PC_BUSY_GUI 0x20000000
|
|
#define PC_BUSY_NGUI 0x40000000
|
|
#define PC_BUSY 0x80000000
|
|
|
|
#define BUS_MASTER_DIS 0x00000040
|
|
#define PM4_BUFFER_CNTL_NONPM4 0x00000000
|
|
|
|
/* DP_DATATYPE bit constants */
|
|
#define DST_8BPP 0x00000002
|
|
#define DST_15BPP 0x00000003
|
|
#define DST_16BPP 0x00000004
|
|
#define DST_24BPP 0x00000005
|
|
#define DST_32BPP 0x00000006
|
|
|
|
#define BRUSH_SOLIDCOLOR 0x00000d00
|
|
|
|
/* DP_GUI_MASTER_CNTL bit constants */
|
|
#define GMC_SRC_PITCH_OFFSET_DEFAULT 0x00000000
|
|
#define GMC_DST_PITCH_OFFSET_DEFAULT 0x00000000
|
|
#define GMC_SRC_CLIP_DEFAULT 0x00000000
|
|
#define GMC_DST_CLIP_DEFAULT 0x00000000
|
|
#define GMC_BRUSH_SOLIDCOLOR 0x000000d0
|
|
#define GMC_SRC_DSTCOLOR 0x00003000
|
|
#define GMC_BYTE_ORDER_MSB_TO_LSB 0x00000000
|
|
#define GMC_DP_SRC_RECT 0x02000000
|
|
#define GMC_3D_FCN_EN_CLR 0x00000000
|
|
#define GMC_AUX_CLIP_CLEAR 0x20000000
|
|
#define GMC_DST_CLR_CMP_FCN_CLEAR 0x10000000
|
|
#define GMC_WRITE_MASK_SET 0x40000000
|
|
#define GMC_DP_CONVERSION_TEMP_6500 0x00000000
|
|
|
|
/* DP_GUI_MASTER_CNTL ROP3 named constants */
|
|
#define ROP3_PATCOPY 0x00f00000
|
|
#define ROP3_SRCCOPY 0x00cc0000
|
|
|
|
#define SRC_DSTCOLOR 0x00030000
|
|
|
|
/* DP_CNTL bit constants */
|
|
#define DST_X_RIGHT_TO_LEFT 0x00000000
|
|
#define DST_X_LEFT_TO_RIGHT 0x00000001
|
|
#define DST_Y_BOTTOM_TO_TOP 0x00000000
|
|
#define DST_Y_TOP_TO_BOTTOM 0x00000002
|
|
#define DST_X_MAJOR 0x00000000
|
|
#define DST_Y_MAJOR 0x00000004
|
|
#define DST_X_TILE 0x00000008
|
|
#define DST_Y_TILE 0x00000010
|
|
#define DST_LAST_PEL 0x00000020
|
|
#define DST_TRAIL_X_RIGHT_TO_LEFT 0x00000000
|
|
#define DST_TRAIL_X_LEFT_TO_RIGHT 0x00000040
|
|
#define DST_TRAP_FILL_RIGHT_TO_LEFT 0x00000000
|
|
#define DST_TRAP_FILL_LEFT_TO_RIGHT 0x00000080
|
|
#define DST_BRES_SIGN 0x00000100
|
|
#define DST_HOST_BIG_ENDIAN_EN 0x00000200
|
|
#define DST_POLYLINE_NONLAST 0x00008000
|
|
#define DST_RASTER_STALL 0x00010000
|
|
#define DST_POLY_EDGE 0x00040000
|
|
|
|
/* DP_MIX bit constants */
|
|
#define DP_SRC_RECT 0x00000200
|
|
#define DP_SRC_HOST 0x00000300
|
|
#define DP_SRC_HOST_BYTEALIGN 0x00000400
|
|
|
|
/* LVDS_GEN_CNTL constants */
|
|
#define LVDS_BL_MOD_LEVEL_MASK 0x0000ff00
|
|
#define LVDS_BL_MOD_LEVEL_SHIFT 8
|
|
#define LVDS_BL_MOD_EN 0x00010000
|
|
#define LVDS_DIGION 0x00040000
|
|
#define LVDS_BLON 0x00080000
|
|
#define LVDS_ON 0x00000001
|
|
#define LVDS_DISPLAY_DIS 0x00000002
|
|
#define LVDS_PANEL_TYPE_2PIX_PER_CLK 0x00000004
|
|
#define LVDS_PANEL_24BITS_TFT 0x00000008
|
|
#define LVDS_FRAME_MOD_NO 0x00000000
|
|
#define LVDS_FRAME_MOD_2_LEVELS 0x00000010
|
|
#define LVDS_FRAME_MOD_4_LEVELS 0x00000020
|
|
#define LVDS_RST_FM 0x00000040
|
|
#define LVDS_EN 0x00000080
|
|
|
|
/* CRTC2_GEN_CNTL constants */
|
|
#define CRTC2_EN 0x02000000
|
|
|
|
/* POWER_MANAGEMENT constants */
|
|
#define PWR_MGT_ON 0x00000001
|
|
#define PWR_MGT_MODE_MASK 0x00000006
|
|
#define PWR_MGT_MODE_PIN 0x00000000
|
|
#define PWR_MGT_MODE_REGISTER 0x00000002
|
|
#define PWR_MGT_MODE_TIMER 0x00000004
|
|
#define PWR_MGT_MODE_PCI 0x00000006
|
|
#define PWR_MGT_AUTO_PWR_UP_EN 0x00000008
|
|
#define PWR_MGT_ACTIVITY_PIN_ON 0x00000010
|
|
#define PWR_MGT_STANDBY_POL 0x00000020
|
|
#define PWR_MGT_SUSPEND_POL 0x00000040
|
|
#define PWR_MGT_SELF_REFRESH 0x00000080
|
|
#define PWR_MGT_ACTIVITY_PIN_EN 0x00000100
|
|
#define PWR_MGT_KEYBD_SNOOP 0x00000200
|
|
#define PWR_MGT_TRISTATE_MEM_EN 0x00000800
|
|
#define PWR_MGT_SELW4MS 0x00001000
|
|
#define PWR_MGT_SLOWDOWN_MCLK 0x00002000
|
|
|
|
#define PMI_PMSCR_REG 0x60
|
|
|
|
/* used by ATI bug fix for hardware ROM */
|
|
#define RAGE128_MPP_TB_CONFIG 0x01c0
|
|
|
|
#endif /* REG_RAGE128_H */
|