linux/drivers/platform/chrome/cros_ec_lpc.c
Gwendal Grignou 57b33ff077 mfd: cros_ec: Support multiple EC in a system
Chromebooks can have more than one Embedded Controller so the
cros_ec device id has to be incremented for each EC registered.

Add a new structure to represent multiple EC as different char
devices (e.g: /dev/cros_ec, /dev/cros_pd). It connects to
cros_ec_device and allows sysfs inferface for cros_pd.

Also reduce number of allocated objects, make chromeos sysfs
class object a static and add refcounting to prevent object
deletion while command is in progress.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Dmitry Torokhov <dtor@chromium.org>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-15 13:18:23 +01:00

393 lines
9.4 KiB
C

/*
* cros_ec_lpc - LPC access to the Chrome OS Embedded Controller
*
* Copyright (C) 2012-2015 Google, Inc
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* This driver uses the Chrome OS EC byte-level message-based protocol for
* communicating the keyboard state (which keys are pressed) from a keyboard EC
* to the AP over some bus (such as i2c, lpc, spi). The EC does debouncing,
* but everything else (including deghosting) is done here. The main
* motivation for this is to keep the EC firmware as simple as possible, since
* it cannot be easily upgraded and EC flash/IRAM space is relatively
* expensive.
*/
#include <linux/dmi.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/mfd/cros_ec.h>
#include <linux/mfd/cros_ec_commands.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/printk.h>
#define DRV_NAME "cros_ec_lpc"
static int ec_response_timed_out(void)
{
unsigned long one_second = jiffies + HZ;
usleep_range(200, 300);
do {
if (!(inb(EC_LPC_ADDR_HOST_CMD) & EC_LPC_STATUS_BUSY_MASK))
return 0;
usleep_range(100, 200);
} while (time_before(jiffies, one_second));
return 1;
}
static int cros_ec_pkt_xfer_lpc(struct cros_ec_device *ec,
struct cros_ec_command *msg)
{
struct ec_host_request *request;
struct ec_host_response response;
u8 sum = 0;
int i;
int ret = 0;
u8 *dout;
ret = cros_ec_prepare_tx(ec, msg);
/* Write buffer */
for (i = 0; i < ret; i++)
outb(ec->dout[i], EC_LPC_ADDR_HOST_PACKET + i);
request = (struct ec_host_request *)ec->dout;
/* Here we go */
outb(EC_COMMAND_PROTOCOL_3, EC_LPC_ADDR_HOST_CMD);
if (ec_response_timed_out()) {
dev_warn(ec->dev, "EC responsed timed out\n");
ret = -EIO;
goto done;
}
/* Check result */
msg->result = inb(EC_LPC_ADDR_HOST_DATA);
ret = cros_ec_check_result(ec, msg);
if (ret)
goto done;
/* Read back response */
dout = (u8 *)&response;
for (i = 0; i < sizeof(response); i++) {
dout[i] = inb(EC_LPC_ADDR_HOST_PACKET + i);
sum += dout[i];
}
msg->result = response.result;
if (response.data_len > msg->insize) {
dev_err(ec->dev,
"packet too long (%d bytes, expected %d)",
response.data_len, msg->insize);
ret = -EMSGSIZE;
goto done;
}
/* Read response and process checksum */
for (i = 0; i < response.data_len; i++) {
msg->data[i] =
inb(EC_LPC_ADDR_HOST_PACKET + sizeof(response) + i);
sum += msg->data[i];
}
if (sum) {
dev_err(ec->dev,
"bad packet checksum %02x\n",
response.checksum);
ret = -EBADMSG;
goto done;
}
/* Return actual amount of data received */
ret = response.data_len;
done:
return ret;
}
static int cros_ec_cmd_xfer_lpc(struct cros_ec_device *ec,
struct cros_ec_command *msg)
{
struct ec_lpc_host_args args;
int csum;
int i;
int ret = 0;
if (msg->outsize > EC_PROTO2_MAX_PARAM_SIZE ||
msg->insize > EC_PROTO2_MAX_PARAM_SIZE) {
dev_err(ec->dev,
"invalid buffer sizes (out %d, in %d)\n",
msg->outsize, msg->insize);
return -EINVAL;
}
/* Now actually send the command to the EC and get the result */
args.flags = EC_HOST_ARGS_FLAG_FROM_HOST;
args.command_version = msg->version;
args.data_size = msg->outsize;
/* Initialize checksum */
csum = msg->command + args.flags +
args.command_version + args.data_size;
/* Copy data and update checksum */
for (i = 0; i < msg->outsize; i++) {
outb(msg->data[i], EC_LPC_ADDR_HOST_PARAM + i);
csum += msg->data[i];
}
/* Finalize checksum and write args */
args.checksum = csum & 0xFF;
outb(args.flags, EC_LPC_ADDR_HOST_ARGS);
outb(args.command_version, EC_LPC_ADDR_HOST_ARGS + 1);
outb(args.data_size, EC_LPC_ADDR_HOST_ARGS + 2);
outb(args.checksum, EC_LPC_ADDR_HOST_ARGS + 3);
/* Here we go */
outb(msg->command, EC_LPC_ADDR_HOST_CMD);
if (ec_response_timed_out()) {
dev_warn(ec->dev, "EC responsed timed out\n");
ret = -EIO;
goto done;
}
/* Check result */
msg->result = inb(EC_LPC_ADDR_HOST_DATA);
switch (msg->result) {
case EC_RES_SUCCESS:
break;
case EC_RES_IN_PROGRESS:
ret = -EAGAIN;
dev_dbg(ec->dev, "command 0x%02x in progress\n",
msg->command);
goto done;
default:
dev_dbg(ec->dev, "command 0x%02x returned %d\n",
msg->command, msg->result);
}
/* Read back args */
args.flags = inb(EC_LPC_ADDR_HOST_ARGS);
args.command_version = inb(EC_LPC_ADDR_HOST_ARGS + 1);
args.data_size = inb(EC_LPC_ADDR_HOST_ARGS + 2);
args.checksum = inb(EC_LPC_ADDR_HOST_ARGS + 3);
if (args.data_size > msg->insize) {
dev_err(ec->dev,
"packet too long (%d bytes, expected %d)",
args.data_size, msg->insize);
ret = -ENOSPC;
goto done;
}
/* Start calculating response checksum */
csum = msg->command + args.flags +
args.command_version + args.data_size;
/* Read response and update checksum */
for (i = 0; i < args.data_size; i++) {
msg->data[i] = inb(EC_LPC_ADDR_HOST_PARAM + i);
csum += msg->data[i];
}
/* Verify checksum */
if (args.checksum != (csum & 0xFF)) {
dev_err(ec->dev,
"bad packet checksum, expected %02x, got %02x\n",
args.checksum, csum & 0xFF);
ret = -EBADMSG;
goto done;
}
/* Return actual amount of data received */
ret = args.data_size;
done:
return ret;
}
/* Returns num bytes read, or negative on error. Doesn't need locking. */
static int cros_ec_lpc_readmem(struct cros_ec_device *ec, unsigned int offset,
unsigned int bytes, void *dest)
{
int i = offset;
char *s = dest;
int cnt = 0;
if (offset >= EC_MEMMAP_SIZE - bytes)
return -EINVAL;
/* fixed length */
if (bytes) {
for (; cnt < bytes; i++, s++, cnt++)
*s = inb(EC_LPC_ADDR_MEMMAP + i);
return cnt;
}
/* string */
for (; i < EC_MEMMAP_SIZE; i++, s++) {
*s = inb(EC_LPC_ADDR_MEMMAP + i);
cnt++;
if (!*s)
break;
}
return cnt;
}
static int cros_ec_lpc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct cros_ec_device *ec_dev;
int ret;
if (!devm_request_region(dev, EC_LPC_ADDR_MEMMAP, EC_MEMMAP_SIZE,
dev_name(dev))) {
dev_err(dev, "couldn't reserve memmap region\n");
return -EBUSY;
}
if ((inb(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID) != 'E') ||
(inb(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID + 1) != 'C')) {
dev_err(dev, "EC ID not detected\n");
return -ENODEV;
}
if (!devm_request_region(dev, EC_HOST_CMD_REGION0,
EC_HOST_CMD_REGION_SIZE, dev_name(dev))) {
dev_err(dev, "couldn't reserve region0\n");
return -EBUSY;
}
if (!devm_request_region(dev, EC_HOST_CMD_REGION1,
EC_HOST_CMD_REGION_SIZE, dev_name(dev))) {
dev_err(dev, "couldn't reserve region1\n");
return -EBUSY;
}
ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);
if (!ec_dev)
return -ENOMEM;
platform_set_drvdata(pdev, ec_dev);
ec_dev->dev = dev;
ec_dev->phys_name = dev_name(dev);
ec_dev->cmd_xfer = cros_ec_cmd_xfer_lpc;
ec_dev->pkt_xfer = cros_ec_pkt_xfer_lpc;
ec_dev->cmd_readmem = cros_ec_lpc_readmem;
ec_dev->din_size = sizeof(struct ec_host_response) +
sizeof(struct ec_response_get_protocol_info);
ec_dev->dout_size = sizeof(struct ec_host_request);
ret = cros_ec_register(ec_dev);
if (ret) {
dev_err(dev, "couldn't register ec_dev (%d)\n", ret);
return ret;
}
return 0;
}
static int cros_ec_lpc_remove(struct platform_device *pdev)
{
struct cros_ec_device *ec_dev;
ec_dev = platform_get_drvdata(pdev);
cros_ec_remove(ec_dev);
return 0;
}
static struct dmi_system_id cros_ec_lpc_dmi_table[] __initdata = {
{
/*
* Today all Chromebooks/boxes ship with Google_* as version and
* coreboot as bios vendor. No other systems with this
* combination are known to date.
*/
.matches = {
DMI_MATCH(DMI_BIOS_VENDOR, "coreboot"),
DMI_MATCH(DMI_BIOS_VERSION, "Google_"),
},
},
{
/* x86-link, the Chromebook Pixel. */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
DMI_MATCH(DMI_PRODUCT_NAME, "Link"),
},
},
{
/* x86-peppy, the Acer C720 Chromebook. */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "Peppy"),
},
},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(dmi, cros_ec_lpc_dmi_table);
static struct platform_driver cros_ec_lpc_driver = {
.driver = {
.name = DRV_NAME,
},
.probe = cros_ec_lpc_probe,
.remove = cros_ec_lpc_remove,
};
static struct platform_device cros_ec_lpc_device = {
.name = DRV_NAME
};
static int __init cros_ec_lpc_init(void)
{
int ret;
if (!dmi_check_system(cros_ec_lpc_dmi_table)) {
pr_err(DRV_NAME ": unsupported system.\n");
return -ENODEV;
}
/* Register the driver */
ret = platform_driver_register(&cros_ec_lpc_driver);
if (ret) {
pr_err(DRV_NAME ": can't register driver: %d\n", ret);
return ret;
}
/* Register the device, and it'll get hooked up automatically */
ret = platform_device_register(&cros_ec_lpc_device);
if (ret) {
pr_err(DRV_NAME ": can't register device: %d\n", ret);
platform_driver_unregister(&cros_ec_lpc_driver);
return ret;
}
return 0;
}
static void __exit cros_ec_lpc_exit(void)
{
platform_device_unregister(&cros_ec_lpc_device);
platform_driver_unregister(&cros_ec_lpc_driver);
}
module_init(cros_ec_lpc_init);
module_exit(cros_ec_lpc_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("ChromeOS EC LPC driver");