Erik Ekman 2191b1dfef net/mlx4_en: Update reported link modes for 1/10G ... When link modes were initially added in commit 2c76267943 ("net/mlx4_en: Use PTYS register to query ethtool settings") and later updated for the new ethtool API in commit 3d8f7cc78d ("net: mlx4: use new ETHTOOL_G/SSETTINGS API") the only 1/10G non-baseT link modes configured were 1000baseKX, 10000baseKX4 and 10000baseKR. It looks like these got picked to represent other modes since nothing better was available. Switch to using more specific link modes added in commit 5711a98221 ("net: ethtool: add support for 1000BaseX and missing 10G link modes"). Tested with MCX311A-XCAT connected via DAC. Before: % sudo ethtool enp3s0 Settings for enp3s0: Supported ports: [ FIBRE ] Supported link modes: 1000baseKX/Full 10000baseKR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: 1000baseKX/Full 10000baseKR/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 10000Mb/s Duplex: Full Auto-negotiation: off Port: Direct Attach Copper PHYAD: 0 Transceiver: internal Supports Wake-on: d Wake-on: d Current message level: 0x00000014 (20) link ifdown Link detected: yes With this change: % sudo ethtool enp3s0 Settings for enp3s0: Supported ports: [ FIBRE ] Supported link modes: 1000baseX/Full 10000baseCR/Full 10000baseSR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: 1000baseX/Full 10000baseCR/Full 10000baseSR/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 10000Mb/s Duplex: Full Auto-negotiation: off Port: Direct Attach Copper PHYAD: 0 Transceiver: internal Supports Wake-on: d Wake-on: d Current message level: 0x00000014 (20) link ifdown Link detected: yes Tested-by: Michael Stapelberg <michael@stapelberg.ch> Signed-off-by: Erik Ekman <erik@kryo.se> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>		2021-11-29 13:03:32 +00:00
..
mlx4	net/mlx4_en: Update reported link modes for 1/10G	2021-11-29 13:03:32 +00:00
mlx5/core	net/mlx5: E-Switch, return error if encap isn't supported	2021-11-16 12:20:23 -08:00
mlxbf_gige	gpio updates for v5.16	2021-11-08 11:55:21 -08:00
mlxfw	devlink: Reduce struct devlink exposure	2021-10-12 16:29:16 -07:00
mlxsw	mlxsw: spectrum: Protect driver from buggy firmware	2021-11-23 11:46:18 +00:00
Kconfig	Add Mellanox BlueField Gigabit Ethernet driver	2021-06-25 11:20:23 -07:00
Makefile	Add Mellanox BlueField Gigabit Ethernet driver	2021-06-25 11:20:23 -07:00