mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-15 23:14:31 +08:00
e79ab194d1
These are updates for platform specific code on 32-bit ARM machines, essentially anything that can not (yet) be expressed using DT files. Noteworthy changes include: - Added support for the TI DRA71x family of SoCs in mach-omap2, this is an new variant of the the DRA72x/DRA74x automotive infotainment chips we already supported for a while. - Added support for the ST STM32F746 SoC, the first Cortex-M7 based microcontroller we support, related to the smaller STM32F4 family. - Renesas adds support for r8a7743 and r8a7745 in mach-shmobile, see http://elinux.org/RZ-G - SMP is now supported on the OX820 platform - A lot of code in mach-omap2 gets removed as a follow-up to removing support for board files in the previous release - Davinci has some new work to improve USB support - For i.MX, the performance monitor now supports profiling the memory controller using 'perf' Conflicts: arch/arm/mach-shmobile/setup-rcar-gen2.c: rcar_gen2_clocks_init() is gone, calling of_clk_init(NULL) is sufficient now. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUAWFMS9WCrR//JCVInAQIG+Q/7BElvubqO/Cc/VEAyoB5iF9OB9wPD2t5p O0KwtrTtzqJZJNGTmPiesR4DMZH07O1XoW8HqvBPeXtB7/t0tmOegwK+WABbpkSE ZQgUjtrIGwteJXYqU2BbhooO8G6mEsfWaqdGX8ZiIk40fPhMN6536lG+JA8DV7uv ckAPHCZkIf34lDtwljN97Cvj1TT9lBFp04bx7alKqfg1IMV+iMSxvSRHuuFlxRCk kzwVXDmFlZLmueU2KbQXTuOUrvehIGlZ/X5QWlxfrjwCwnOvr54p8WDoVWu2UkHm Dc8BVfsBny8mCZJRzfDD1S0PD0mWn1msdOhRb4VRzsC9DnRI4qbL0/Hstu8A7yUQ kBtMyVtFTzvRSclABbHHN6Mnm37AyNwSIKIB8h2U1m7YHqZGwHLaflVT5sf3tl7m 4arTVqHtR8oSU5G5a2FTznMM2rfIx4LcCBbLQxWqzmO4Qrh4j6t7c2i7+VTfFAja 0bToLgTArKK/cep6PWeBnMH14nzlXoKtBf2T8qwQPuAmLKy9E0ZduLKZ01B/nqrj OXcsnG0OUuqU4RgbIaDssRU4ohKIk8JcAl60TdRFhzj+/LTbeMaWVwbWuQS+iHd3 zfzGUoUIhElx0vHt6ghR0BYQadszb1z9V0NEs3UM0v5cWlNodX//3okH8lZmSW6w +fO4dSnIKIA= =BF6Y -----END PGP SIGNATURE----- Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "These are updates for platform specific code on 32-bit ARM machines, essentially anything that can not (yet) be expressed using DT files. Noteworthy changes include: - Added support for the TI DRA71x family of SoCs in mach-omap2, this is an new variant of the the DRA72x/DRA74x automotive infotainment chips we already supported for a while. - Added support for the ST STM32F746 SoC, the first Cortex-M7 based microcontroller we support, related to the smaller STM32F4 family. - Renesas adds support for r8a7743 and r8a7745 in mach-shmobile, see http://elinux.org/RZ-G - SMP is now supported on the OX820 platform - A lot of code in mach-omap2 gets removed as a follow-up to removing support for board files in the previous release - Davinci has some new work to improve USB support - For i.MX, the performance monitor now supports profiling the memory controller using 'perf'" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (95 commits) ARM: davinci: da830-evm: use gpio descriptor for mmc pins ARM: davinci: da850-evm: use gpio descriptor for mmc pins ARM: davinci: hawk: use gpio descriptor for mmc pins ARM: ARTPEC-6: add select MFD_SYSCON to MACH_ARTPEC6 ARM: davinci: da8xx: Fix ohci device name ARM: oxnas: Add OX820 config and makefile entry ARM: oxnas: Add OX820 SMP support ARM: davinci: PM: fix build when da850 not compiled in ARM: orion5x: remove legacy support of ls-chl ARM: integrator: drop EBI access use syscon ARM: BCM5301X: Add back handler ignoring external imprecise aborts ARM: davinci: PM: support da8xx DT platforms ARM: davinci: PM: cleanup: remove references to pdata ARM: davinci: PM: rework init, remove platform device ARM: Kconfig: Introduce MACH_STM32F746 flag ARM: mach-stm32: Add a new SOC - STM32F746 ARM: shmobile: document SK-RZG1E board ARM: shmobile: r8a7745: basic SoC support ARM: imx: mach-imx6ul: add imx6ull support ARM: zynq: Reserve correct amount of non-DMA RAM ...
363 lines
11 KiB
C
363 lines
11 KiB
C
/*
|
|
* Marvell PXA25x family clocks
|
|
*
|
|
* Copyright (C) 2014 Robert Jarzmik
|
|
*
|
|
* Heavily inspired from former arch/arm/mach-pxa/pxa25x.c.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* For non-devicetree platforms. Once pxa is fully converted to devicetree, this
|
|
* should go away.
|
|
*/
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/clkdev.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <mach/pxa2xx-regs.h>
|
|
#include <mach/smemc.h>
|
|
|
|
#include <dt-bindings/clock/pxa-clock.h>
|
|
#include "clk-pxa.h"
|
|
|
|
#define KHz 1000
|
|
#define MHz (1000 * 1000)
|
|
|
|
enum {
|
|
PXA_CORE_RUN = 0,
|
|
PXA_CORE_TURBO,
|
|
};
|
|
|
|
#define PXA25x_CLKCFG(T) \
|
|
(CLKCFG_FCS | \
|
|
((T) ? CLKCFG_TURBO : 0))
|
|
#define PXA25x_CCCR(N2, M, L) (N2 << 7 | M << 5 | L)
|
|
|
|
#define MDCNFG_DRAC2(mdcnfg) (((mdcnfg) >> 21) & 0x3)
|
|
#define MDCNFG_DRAC0(mdcnfg) (((mdcnfg) >> 5) & 0x3)
|
|
|
|
/* Define the refresh period in mSec for the SDRAM and the number of rows */
|
|
#define SDRAM_TREF 64 /* standard 64ms SDRAM */
|
|
|
|
/*
|
|
* Various clock factors driven by the CCCR register.
|
|
*/
|
|
|
|
/* Crystal Frequency to Memory Frequency Multiplier (L) */
|
|
static unsigned char L_clk_mult[32] = { 0, 27, 32, 36, 40, 45, 0, };
|
|
|
|
/* Memory Frequency to Run Mode Frequency Multiplier (M) */
|
|
static unsigned char M_clk_mult[4] = { 0, 1, 2, 4 };
|
|
|
|
/* Run Mode Frequency to Turbo Mode Frequency Multiplier (N) */
|
|
/* Note: we store the value N * 2 here. */
|
|
static unsigned char N2_clk_mult[8] = { 0, 0, 2, 3, 4, 0, 6, 0 };
|
|
|
|
static const char * const get_freq_khz[] = {
|
|
"core", "run", "cpll", "memory"
|
|
};
|
|
|
|
static int get_sdram_rows(void)
|
|
{
|
|
static int sdram_rows;
|
|
unsigned int drac2 = 0, drac0 = 0;
|
|
u32 mdcnfg;
|
|
|
|
if (sdram_rows)
|
|
return sdram_rows;
|
|
|
|
mdcnfg = readl_relaxed(MDCNFG);
|
|
|
|
if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
|
|
drac2 = MDCNFG_DRAC2(mdcnfg);
|
|
|
|
if (mdcnfg & (MDCNFG_DE0 | MDCNFG_DE1))
|
|
drac0 = MDCNFG_DRAC0(mdcnfg);
|
|
|
|
sdram_rows = 1 << (11 + max(drac0, drac2));
|
|
return sdram_rows;
|
|
}
|
|
|
|
static u32 mdrefr_dri(unsigned int freq_khz)
|
|
{
|
|
u32 interval = freq_khz * SDRAM_TREF / get_sdram_rows();
|
|
|
|
return interval / 32;
|
|
}
|
|
|
|
/*
|
|
* Get the clock frequency as reflected by CCCR and the turbo flag.
|
|
* We assume these values have been applied via a fcs.
|
|
* If info is not 0 we also display the current settings.
|
|
*/
|
|
unsigned int pxa25x_get_clk_frequency_khz(int info)
|
|
{
|
|
struct clk *clk;
|
|
unsigned long clks[5];
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(get_freq_khz); i++) {
|
|
clk = clk_get(NULL, get_freq_khz[i]);
|
|
if (IS_ERR(clk)) {
|
|
clks[i] = 0;
|
|
} else {
|
|
clks[i] = clk_get_rate(clk);
|
|
clk_put(clk);
|
|
}
|
|
}
|
|
|
|
if (info) {
|
|
pr_info("Run Mode clock: %ld.%02ldMHz\n",
|
|
clks[1] / 1000000, (clks[1] % 1000000) / 10000);
|
|
pr_info("Turbo Mode clock: %ld.%02ldMHz\n",
|
|
clks[2] / 1000000, (clks[2] % 1000000) / 10000);
|
|
pr_info("Memory clock: %ld.%02ldMHz\n",
|
|
clks[3] / 1000000, (clks[3] % 1000000) / 10000);
|
|
}
|
|
|
|
return (unsigned int)clks[0] / KHz;
|
|
}
|
|
|
|
static unsigned long clk_pxa25x_memory_get_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
unsigned long cccr = readl(CCCR);
|
|
unsigned int m = M_clk_mult[(cccr >> 5) & 0x03];
|
|
|
|
return parent_rate / m;
|
|
}
|
|
PARENTS(clk_pxa25x_memory) = { "run" };
|
|
RATE_RO_OPS(clk_pxa25x_memory, "memory");
|
|
|
|
PARENTS(pxa25x_pbus95) = { "ppll_95_85mhz", "ppll_95_85mhz" };
|
|
PARENTS(pxa25x_pbus147) = { "ppll_147_46mhz", "ppll_147_46mhz" };
|
|
PARENTS(pxa25x_osc3) = { "osc_3_6864mhz", "osc_3_6864mhz" };
|
|
|
|
#define PXA25X_CKEN(dev_id, con_id, parents, mult, div, \
|
|
bit, is_lp, flags) \
|
|
PXA_CKEN(dev_id, con_id, bit, parents, mult, div, mult, div, \
|
|
is_lp, CKEN, CKEN_ ## bit, flags)
|
|
#define PXA25X_PBUS95_CKEN(dev_id, con_id, bit, mult_hp, div_hp, delay) \
|
|
PXA25X_CKEN(dev_id, con_id, pxa25x_pbus95_parents, mult_hp, \
|
|
div_hp, bit, NULL, 0)
|
|
#define PXA25X_PBUS147_CKEN(dev_id, con_id, bit, mult_hp, div_hp, delay)\
|
|
PXA25X_CKEN(dev_id, con_id, pxa25x_pbus147_parents, mult_hp, \
|
|
div_hp, bit, NULL, 0)
|
|
#define PXA25X_OSC3_CKEN(dev_id, con_id, bit, mult_hp, div_hp, delay) \
|
|
PXA25X_CKEN(dev_id, con_id, pxa25x_osc3_parents, mult_hp, \
|
|
div_hp, bit, NULL, 0)
|
|
|
|
#define PXA25X_CKEN_1RATE(dev_id, con_id, bit, parents, delay) \
|
|
PXA_CKEN_1RATE(dev_id, con_id, bit, parents, \
|
|
CKEN, CKEN_ ## bit, 0)
|
|
#define PXA25X_CKEN_1RATE_AO(dev_id, con_id, bit, parents, delay) \
|
|
PXA_CKEN_1RATE(dev_id, con_id, bit, parents, \
|
|
CKEN, CKEN_ ## bit, CLK_IGNORE_UNUSED)
|
|
|
|
static struct desc_clk_cken pxa25x_clocks[] __initdata = {
|
|
PXA25X_PBUS95_CKEN("pxa2xx-mci.0", NULL, MMC, 1, 5, 0),
|
|
PXA25X_PBUS95_CKEN("pxa2xx-i2c.0", NULL, I2C, 1, 3, 0),
|
|
PXA25X_PBUS95_CKEN("pxa2xx-ir", "FICPCLK", FICP, 1, 2, 0),
|
|
PXA25X_PBUS95_CKEN("pxa25x-udc", NULL, USB, 1, 2, 5),
|
|
PXA25X_PBUS147_CKEN("pxa2xx-uart.0", NULL, FFUART, 1, 10, 1),
|
|
PXA25X_PBUS147_CKEN("pxa2xx-uart.1", NULL, BTUART, 1, 10, 1),
|
|
PXA25X_PBUS147_CKEN("pxa2xx-uart.2", NULL, STUART, 1, 10, 1),
|
|
PXA25X_PBUS147_CKEN("pxa2xx-uart.3", NULL, HWUART, 1, 10, 1),
|
|
PXA25X_PBUS147_CKEN("pxa2xx-i2s", NULL, I2S, 1, 10, 0),
|
|
PXA25X_PBUS147_CKEN(NULL, "AC97CLK", AC97, 1, 12, 0),
|
|
PXA25X_OSC3_CKEN("pxa25x-ssp.0", NULL, SSP, 1, 1, 0),
|
|
PXA25X_OSC3_CKEN("pxa25x-nssp.1", NULL, NSSP, 1, 1, 0),
|
|
PXA25X_OSC3_CKEN("pxa25x-nssp.2", NULL, ASSP, 1, 1, 0),
|
|
PXA25X_OSC3_CKEN("pxa25x-pwm.0", NULL, PWM0, 1, 1, 0),
|
|
PXA25X_OSC3_CKEN("pxa25x-pwm.1", NULL, PWM1, 1, 1, 0),
|
|
|
|
PXA25X_CKEN_1RATE("pxa2xx-fb", NULL, LCD, clk_pxa25x_memory_parents, 0),
|
|
PXA25X_CKEN_1RATE_AO("pxa2xx-pcmcia", NULL, MEMC,
|
|
clk_pxa25x_memory_parents, 0),
|
|
};
|
|
|
|
/*
|
|
* In this table, PXA25x_CCCR(N2, M, L) has the following meaning, where :
|
|
* - freq_cpll = n * m * L * 3.6864 MHz
|
|
* - n = N2 / 2
|
|
* - m = 2^(M - 1), where 1 <= M <= 3
|
|
* - l = L_clk_mult[L], ie. { 0, 27, 32, 36, 40, 45, 0, }[L]
|
|
*/
|
|
static struct pxa2xx_freq pxa25x_freqs[] = {
|
|
/* CPU MEMBUS CCCR DIV2 CCLKCFG */
|
|
{ 99532800, 99500, PXA25x_CCCR(2, 1, 1), 1, PXA25x_CLKCFG(1)},
|
|
{199065600, 99500, PXA25x_CCCR(4, 1, 1), 0, PXA25x_CLKCFG(1)},
|
|
{298598400, 99500, PXA25x_CCCR(3, 2, 1), 0, PXA25x_CLKCFG(1)},
|
|
{398131200, 99500, PXA25x_CCCR(4, 2, 1), 0, PXA25x_CLKCFG(1)},
|
|
};
|
|
|
|
static u8 clk_pxa25x_core_get_parent(struct clk_hw *hw)
|
|
{
|
|
unsigned long clkcfg;
|
|
unsigned int t;
|
|
|
|
asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg));
|
|
t = clkcfg & (1 << 0);
|
|
if (t)
|
|
return PXA_CORE_TURBO;
|
|
return PXA_CORE_RUN;
|
|
}
|
|
|
|
static int clk_pxa25x_core_set_parent(struct clk_hw *hw, u8 index)
|
|
{
|
|
if (index > PXA_CORE_TURBO)
|
|
return -EINVAL;
|
|
|
|
pxa2xx_core_turbo_switch(index == PXA_CORE_TURBO);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int clk_pxa25x_core_determine_rate(struct clk_hw *hw,
|
|
struct clk_rate_request *req)
|
|
{
|
|
return __clk_mux_determine_rate(hw, req);
|
|
}
|
|
|
|
PARENTS(clk_pxa25x_core) = { "run", "cpll" };
|
|
MUX_OPS(clk_pxa25x_core, "core", CLK_SET_RATE_PARENT);
|
|
|
|
static unsigned long clk_pxa25x_run_get_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
unsigned long cccr = readl(CCCR);
|
|
unsigned int n2 = N2_clk_mult[(cccr >> 7) & 0x07];
|
|
|
|
return (parent_rate / n2) * 2;
|
|
}
|
|
PARENTS(clk_pxa25x_run) = { "cpll" };
|
|
RATE_RO_OPS(clk_pxa25x_run, "run");
|
|
|
|
static unsigned long clk_pxa25x_cpll_get_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
unsigned long clkcfg, cccr = readl(CCCR);
|
|
unsigned int l, m, n2, t;
|
|
|
|
asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg));
|
|
t = clkcfg & (1 << 0);
|
|
l = L_clk_mult[(cccr >> 0) & 0x1f];
|
|
m = M_clk_mult[(cccr >> 5) & 0x03];
|
|
n2 = N2_clk_mult[(cccr >> 7) & 0x07];
|
|
|
|
return m * l * n2 * parent_rate / 2;
|
|
}
|
|
|
|
static int clk_pxa25x_cpll_determine_rate(struct clk_hw *hw,
|
|
struct clk_rate_request *req)
|
|
{
|
|
return pxa2xx_determine_rate(req, pxa25x_freqs,
|
|
ARRAY_SIZE(pxa25x_freqs));
|
|
}
|
|
|
|
static int clk_pxa25x_cpll_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
int i;
|
|
|
|
pr_debug("%s(rate=%lu parent_rate=%lu)\n", __func__, rate, parent_rate);
|
|
for (i = 0; i < ARRAY_SIZE(pxa25x_freqs); i++)
|
|
if (pxa25x_freqs[i].cpll == rate)
|
|
break;
|
|
|
|
if (i >= ARRAY_SIZE(pxa25x_freqs))
|
|
return -EINVAL;
|
|
|
|
pxa2xx_cpll_change(&pxa25x_freqs[i], mdrefr_dri, MDREFR, CCCR);
|
|
|
|
return 0;
|
|
}
|
|
PARENTS(clk_pxa25x_cpll) = { "osc_3_6864mhz" };
|
|
RATE_OPS(clk_pxa25x_cpll, "cpll");
|
|
|
|
static void __init pxa25x_register_core(void)
|
|
{
|
|
clkdev_pxa_register(CLK_NONE, "cpll", NULL,
|
|
clk_register_clk_pxa25x_cpll());
|
|
clkdev_pxa_register(CLK_NONE, "run", NULL,
|
|
clk_register_clk_pxa25x_run());
|
|
clkdev_pxa_register(CLK_CORE, "core", NULL,
|
|
clk_register_clk_pxa25x_core());
|
|
}
|
|
|
|
static void __init pxa25x_register_plls(void)
|
|
{
|
|
clk_register_fixed_rate(NULL, "osc_3_6864mhz", NULL,
|
|
CLK_GET_RATE_NOCACHE, 3686400);
|
|
clk_register_fixed_rate(NULL, "osc_32_768khz", NULL,
|
|
CLK_GET_RATE_NOCACHE, 32768);
|
|
clk_register_fixed_rate(NULL, "clk_dummy", NULL, 0, 0);
|
|
clk_register_fixed_factor(NULL, "ppll_95_85mhz", "osc_3_6864mhz",
|
|
0, 26, 1);
|
|
clk_register_fixed_factor(NULL, "ppll_147_46mhz", "osc_3_6864mhz",
|
|
0, 40, 1);
|
|
}
|
|
|
|
static void __init pxa25x_base_clocks_init(void)
|
|
{
|
|
pxa25x_register_plls();
|
|
pxa25x_register_core();
|
|
clkdev_pxa_register(CLK_NONE, "system_bus", NULL,
|
|
clk_register_clk_pxa25x_memory());
|
|
}
|
|
|
|
#define DUMMY_CLK(_con_id, _dev_id, _parent) \
|
|
{ .con_id = _con_id, .dev_id = _dev_id, .parent = _parent }
|
|
struct dummy_clk {
|
|
const char *con_id;
|
|
const char *dev_id;
|
|
const char *parent;
|
|
};
|
|
static struct dummy_clk dummy_clks[] __initdata = {
|
|
DUMMY_CLK(NULL, "pxa25x-gpio", "osc_32_768khz"),
|
|
DUMMY_CLK(NULL, "pxa26x-gpio", "osc_32_768khz"),
|
|
DUMMY_CLK("GPIO11_CLK", NULL, "osc_3_6864mhz"),
|
|
DUMMY_CLK("GPIO12_CLK", NULL, "osc_32_768khz"),
|
|
DUMMY_CLK(NULL, "sa1100-rtc", "osc_32_768khz"),
|
|
DUMMY_CLK("OSTIMER0", NULL, "osc_3_6864mhz"),
|
|
DUMMY_CLK("UARTCLK", "pxa2xx-ir", "STUART"),
|
|
};
|
|
|
|
static void __init pxa25x_dummy_clocks_init(void)
|
|
{
|
|
struct clk *clk;
|
|
struct dummy_clk *d;
|
|
const char *name;
|
|
int i;
|
|
|
|
/*
|
|
* All pinctrl logic has been wiped out of the clock driver, especially
|
|
* for gpio11 and gpio12 outputs. Machine code should ensure proper pin
|
|
* control (ie. pxa2xx_mfp_config() invocation).
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(dummy_clks); i++) {
|
|
d = &dummy_clks[i];
|
|
name = d->dev_id ? d->dev_id : d->con_id;
|
|
clk = clk_register_fixed_factor(NULL, name, d->parent, 0, 1, 1);
|
|
clk_register_clkdev(clk, d->con_id, d->dev_id);
|
|
}
|
|
}
|
|
|
|
int __init pxa25x_clocks_init(void)
|
|
{
|
|
pxa25x_base_clocks_init();
|
|
pxa25x_dummy_clocks_init();
|
|
return clk_pxa_cken_init(pxa25x_clocks, ARRAY_SIZE(pxa25x_clocks));
|
|
}
|
|
|
|
static void __init pxa25x_dt_clocks_init(struct device_node *np)
|
|
{
|
|
pxa25x_clocks_init();
|
|
clk_pxa_dt_common_init(np);
|
|
}
|
|
CLK_OF_DECLARE(pxa25x_clks, "marvell,pxa250-core-clocks",
|
|
pxa25x_dt_clocks_init);
|