Shawn Guo d1654b803f ARM: mxs: enable pinctrl dummy states ... The mxs pinctrl driver will only support DT probe. That said, the mxs device drivers can only get pinctrl state from pinctrl subsystem when the drivers get probed from device tree. Before converting the whole mxs platform support over to device tree, we need to enable pinctrl dummy states for those non-DT board files to ensure the pinctrl API adopted by mxs device drivers will work for both DT and non-DT probe. Instead of calling pinctrl_provide_dummies() directly in every board file, the patch introduces soc specific calls mx23_soc_init() and mx28_soc_init() for boards' .init_machine hook to invoke, so that any soc specific setup for non-DT boot only can be added there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>		2012-05-08 23:05:17 +08:00
..
devices	ARM: driver specific updates	2012-03-27 16:41:24 -07:00
include/mach	ARM: mxs: enable pinctrl dummy states	2012-05-08 23:05:17 +08:00
clock-mx23.c	ARM: driver specific updates	2012-03-27 16:41:24 -07:00
clock-mx28.c	ARM: driver specific updates	2012-03-27 16:41:24 -07:00
clock.c	ARM: mxs: select HAVE_CLK_PREPARE for clock	2011-12-28 21:35:08 +08:00
devices-mx23.h	ARM: mxs: add GPMI-NAND support for imx23/imx28	2012-02-11 07:39:53 -08:00
devices-mx28.h	ARM: mxs: add GPMI-NAND support for imx23/imx28	2012-02-11 07:39:53 -08:00
devices.c	ARM: amba: mxs: convert to use amba_device_alloc	2012-01-25 11:02:02 +00:00
icoll.c	arm: Fold irq_set_chip/irq_set_handler	2011-03-29 14:47:58 +02:00
iomux.c	ARM: mxs: Add iomux support	2010-12-20 17:29:58 +01:00
Kconfig	ARM: mxs: Add initial support for Bluegiga APX4 Development Kit	2012-02-04 07:35:54 +08:00
mach-apx4devkit.c	ARM: mxs: enable pinctrl dummy states	2012-05-08 23:05:17 +08:00
mach-m28evk.c	ARM: mxs: enable pinctrl dummy states	2012-05-08 23:05:17 +08:00
mach-mx23evk.c	ARM: mxs: enable pinctrl dummy states	2012-05-08 23:05:17 +08:00
mach-mx28evk.c	ARM: mxs: enable pinctrl dummy states	2012-05-08 23:05:17 +08:00
mach-stmp378x_devb.c	ARM: mxs: enable pinctrl dummy states	2012-05-08 23:05:17 +08:00
mach-tx28.c	ARM: mxs: enable pinctrl dummy states	2012-05-08 23:05:17 +08:00
Makefile	ARM: mxs: Add initial support for Bluegiga APX4 Development Kit	2012-02-04 07:35:54 +08:00
Makefile.boot	ARM: 7022/1: allow to detect conflicting zreladdrs	2011-10-17 09:12:40 +01:00
mm.c	ARM: mxs: enable pinctrl dummy states	2012-05-08 23:05:17 +08:00
module-tx28.c	ARM: mxs/tx28: add __initconst for fec pdata	2011-12-02 13:27:22 +08:00
module-tx28.h	ARM: mxs: configure and register the second FEC device on TX28/STK5-V4	2011-03-23 15:08:14 +01:00
ocotp.c	arm: mxs: include asm/processor.h for cpu_relax()	2011-06-06 09:50:04 +02:00
pm.c	ARM: substitute arch_idle()	2012-01-20 18:55:19 -05:00
regs-clkctrl-mx23.h	ARM i.MX23: remove reserved register defines	2011-01-28 08:28:52 +01:00
regs-clkctrl-mx28.h	ARM i.MX28: remove reserved register defines	2011-01-28 08:28:57 +01:00
system.c	Disintegrate and delete asm/system.h	2012-03-28 15:58:21 -07:00
timer.c	ARM: mxs: convert platform code to clk_prepare/clk_unprepare	2011-12-28 21:26:07 +08:00