linux/net/dccp/ccids
Ian McDonald 66a377c504 [DCCP]: Fix CCID3
This fixes CCID3 to give much closer performance to RFC4342.

CCID3 is meant to alter sending rate based on RTT and loss.

The performance was verified against:
http://wand.net.nz/~perry/max_download.php

For example I tested with netem and had the following parameters:
Delayed Acks 1, MSS 256 bytes, RTT 105 ms, packet loss 5%.

This gives a theoretical speed of 71.9 Kbits/s. I measured across three
runs with this patch set and got 70.1 Kbits/s. Without this patchset the
average was 232 Kbits/s which means Linux can't be used for CCID3 research
properly.

I also tested with netem turned off so box just acting as router with 1.2
msec RTT. The performance with this is the same with or without the patch
at around 30 Mbit/s.

Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-26 23:40:50 -07:00
..
lib [DCCP]: Fix CCID3 2006-08-26 23:40:50 -07:00
ccid2.c Remove obsolete #include <linux/config.h> 2006-06-30 19:25:36 +02:00
ccid2.h [DCCP] CCID: Improve CCID infrastructure 2006-03-20 19:21:44 -08:00
ccid3.c [DCCP]: Fix CCID3 2006-08-26 23:40:50 -07:00
ccid3.h [DCCP]: Fix CCID3 2006-08-26 23:40:50 -07:00
Kconfig [DCCP]: Kconfig tidy up 2006-03-20 19:24:22 -08:00
Makefile [DCCP] CCID2: Initial CCID2 (TCP-Like) implementation 2006-03-20 17:41:47 -08:00