linux/drivers/usb/serial
Kristian Evensen d1252f0237 USB: serial: option: add support for Quectel EM12
The Quectel EM12 is a Cat. 12 LTE modem. It behaves in the exactly the
same way as the EP06 (including the dynamic configuration behavior), so
the same checks on reserved interfaces, etc. are needed.

Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
2019-03-19 10:37:18 +01:00
..
aircable.c USB: serial: fix module-license macros 2017-11-04 11:58:00 +01:00
ark3116.c ark3116: switch to ->get_serial() 2018-10-13 00:50:35 -04:00
belkin_sa.c USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
belkin_sa.h USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
bus.c USB: serial: use tty_port_register_device() 2018-05-17 11:22:00 +02:00
ch341.c USB: serial: ch341: fix type promotion bug in ch341_control_in() 2018-07-04 15:40:54 +02:00
console.c USB: serial: console: fix reported terminal settings 2018-12-05 11:29:10 +01:00
cp210x.c USB-serial fixes for 5.1-rc1 2019-02-21 17:28:50 +01:00
cyberjack.c USB: serial: cyberjack: use irqsave() in USB's complete callback 2018-06-26 14:13:53 +02:00
cypress_m8.c USB: serial: cypress_m8: remove set but not used variable 'iflag' 2018-10-05 08:58:42 +02:00
cypress_m8.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
digi_acceleport.c USB: serial: digi_acceleport: rename tty flag variable 2018-06-27 07:59:03 +02:00
empeg.c USB: serial: fix module-license macros 2017-11-04 11:58:00 +01:00
ezusb_convert.pl License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
f81232.c f81232: switch to ->get_serial() 2018-10-13 00:50:35 -04:00
f81534.c USB: serial: f81534: fix reading old/new IC config 2018-11-20 18:25:44 +01:00
ftdi_sio_ids.h USB: serial: ftdi_sio: add ID for Hjelmslund Electronics USB485 2019-02-15 09:16:49 +01:00
ftdi_sio.c USB: serial: ftdi_sio: add ID for Hjelmslund Electronics USB485 2019-02-15 09:16:49 +01:00
ftdi_sio.h USB: serial: ftdi_sio: add support for FT232R CBUS gpios 2018-10-05 08:57:06 +02:00
garmin_gps.c USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
generic.c USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
io_16654.h USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
io_edgeport.c io_edgeport: switch to ->get_serial() 2018-10-13 00:50:37 -04:00
io_edgeport.h USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
io_ionsp.h USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
io_ti.c io_ti: switch to ->get_serial() 2018-10-13 00:50:38 -04:00
io_ti.h USB: serial: io_ti: fix array underflow in completion handler 2018-08-27 11:52:34 +02:00
io_usbvend.h USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
ipaq.c USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
ipw.c USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
ir-usb.c USB: serial: cast sizeof() to int when comparing with error code 2018-06-25 10:34:31 +02:00
iuu_phoenix.c USB: serial: iuu_phoenix: drop redundant input-speed re-encoding 2018-07-16 14:12:11 +02:00
iuu_phoenix.h USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
Kconfig USB: add missing SPDX lines to Kconfig and Makefiles 2019-01-22 09:08:17 +01:00
keyspan_pda.c USB: serial: keyspan_pda: fix modem-status error handling 2018-07-06 10:32:14 +02:00
keyspan_usa26msg.h USB: serial: keyspan_usa: add proper SPDX lines for .h files 2019-01-18 11:09:32 +01:00
keyspan_usa28msg.h USB: serial: keyspan_usa: add proper SPDX lines for .h files 2019-01-18 11:09:32 +01:00
keyspan_usa49msg.h USB: serial: keyspan_usa: add proper SPDX lines for .h files 2019-01-18 11:09:32 +01:00
keyspan_usa67msg.h USB: serial: keyspan_usa: add proper SPDX lines for .h files 2019-01-18 11:09:32 +01:00
keyspan_usa90msg.h USB: serial: keyspan_usa: add proper SPDX lines for .h files 2019-01-18 11:09:32 +01:00
keyspan.c USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
kl5kusb105.c USB: serial: kl5kusb105: remove KLSI device id 2018-07-11 10:11:29 +02:00
kl5kusb105.h USB: serial: kl5kusb105: remove KLSI device id 2018-07-11 10:11:29 +02:00
kobil_sct.c USB: serial: kobil_sct: add missing version error handling 2018-07-06 10:42:42 +02:00
kobil_sct.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
Makefile License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
Makefile-keyspan_pda_fw USB: add SPDX identifiers to all remaining Makefiles 2017-11-07 15:53:48 +01:00
mct_u232.c USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
mct_u232.h USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
metro-usb.c USB: serial: fix module-license macros 2017-11-04 11:58:00 +01:00
mos7720.c mos7720: switch to ->get_serial() 2018-10-13 00:50:38 -04:00
mos7840.c USB: serial: mos7840: remove set but not used variables 'number, serial' 2018-12-10 10:20:44 +01:00
mxuport.c USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
navman.c USB: serial: fix module-license macros 2017-11-04 11:58:00 +01:00
omninet.c USB: serial: fix module-license macros 2017-11-04 11:58:00 +01:00
opticon.c opticon: switch to ->get_serial() 2018-10-13 00:50:39 -04:00
option.c USB: serial: option: add support for Quectel EM12 2019-03-19 10:37:18 +01:00
oti6858.c USB: serial: fix module-license macros 2017-11-04 11:58:00 +01:00
oti6858.h USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
pl2303.c USB: serial: pl2303: add new PID to support PL2303TB 2019-01-17 17:24:39 +01:00
pl2303.h USB: serial: pl2303: add new PID to support PL2303TB 2019-01-17 17:24:39 +01:00
qcaux.c USB: serial: fix module-license macros 2017-11-04 11:58:00 +01:00
qcserial.c USB: serial: qcserial: add Sierra Wireless EM7565 2017-12-15 09:41:46 +01:00
quatech2.c USB: serial: quatech2: remove set but not used variable 'port_priv' 2018-11-12 10:08:10 +01:00
safe_serial.c USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
sierra.c USB: serial: sierra: use irqsave() in USB's complete callback 2018-06-26 15:22:25 +02:00
spcp8x5.c USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
ssu100.c ssu100: switch to ->get_serial() 2018-10-13 00:50:41 -04:00
symbolserial.c USB: serial: symbolserial: use irqsave() in USB's complete callback 2018-06-26 15:25:01 +02:00
ti_usb_3410_5052.c Merge branch 'work.tty-ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs 2018-10-24 14:43:41 +01:00
upd78f0730.c USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
usb_debug.c USB: serial: usb_debug: add new USB device id 2017-11-28 09:54:11 +01:00
usb_wwan.c usb_wwan: switch to ->[sg]et_serial() 2018-10-13 00:50:42 -04:00
usb-serial-simple.c USB: serial: simple: add Motorola Tetra TPG2200 device id 2019-01-07 16:37:52 +01:00
usb-serial.c complete ->[sg]et_serial() switchover 2018-10-13 00:50:43 -04:00
usb-wwan.h usb_wwan: switch to ->[sg]et_serial() 2018-10-13 00:50:42 -04:00
visor.c USB: serial: visor: handle potential invalid device configuration 2018-05-02 09:37:19 +02:00
visor.h USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
whiteheat.c whiteheat: switch to ->get_serial() 2018-10-13 00:50:42 -04:00
whiteheat.h USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
wishbone-serial.c USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
xsens_mt.c USB: serial: fix module-license macros 2017-11-04 11:58:00 +01:00