mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-17 07:54:54 +08:00
f0f59a00a1
Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
15976 lines
440 KiB
C
15976 lines
440 KiB
C
/*
|
|
* Copyright © 2006-2007 Intel Corporation
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the "Software"),
|
|
* to deal in the Software without restriction, including without limitation
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice (including the next
|
|
* paragraph) shall be included in all copies or substantial portions of the
|
|
* Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
|
|
* DEALINGS IN THE SOFTWARE.
|
|
*
|
|
* Authors:
|
|
* Eric Anholt <eric@anholt.net>
|
|
*/
|
|
|
|
#include <linux/dmi.h>
|
|
#include <linux/module.h>
|
|
#include <linux/input.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/vgaarb.h>
|
|
#include <drm/drm_edid.h>
|
|
#include <drm/drmP.h>
|
|
#include "intel_drv.h"
|
|
#include <drm/i915_drm.h>
|
|
#include "i915_drv.h"
|
|
#include "i915_trace.h"
|
|
#include <drm/drm_atomic.h>
|
|
#include <drm/drm_atomic_helper.h>
|
|
#include <drm/drm_dp_helper.h>
|
|
#include <drm/drm_crtc_helper.h>
|
|
#include <drm/drm_plane_helper.h>
|
|
#include <drm/drm_rect.h>
|
|
#include <linux/dma_remapping.h>
|
|
|
|
/* Primary plane formats for gen <= 3 */
|
|
static const uint32_t i8xx_primary_formats[] = {
|
|
DRM_FORMAT_C8,
|
|
DRM_FORMAT_RGB565,
|
|
DRM_FORMAT_XRGB1555,
|
|
DRM_FORMAT_XRGB8888,
|
|
};
|
|
|
|
/* Primary plane formats for gen >= 4 */
|
|
static const uint32_t i965_primary_formats[] = {
|
|
DRM_FORMAT_C8,
|
|
DRM_FORMAT_RGB565,
|
|
DRM_FORMAT_XRGB8888,
|
|
DRM_FORMAT_XBGR8888,
|
|
DRM_FORMAT_XRGB2101010,
|
|
DRM_FORMAT_XBGR2101010,
|
|
};
|
|
|
|
static const uint32_t skl_primary_formats[] = {
|
|
DRM_FORMAT_C8,
|
|
DRM_FORMAT_RGB565,
|
|
DRM_FORMAT_XRGB8888,
|
|
DRM_FORMAT_XBGR8888,
|
|
DRM_FORMAT_ARGB8888,
|
|
DRM_FORMAT_ABGR8888,
|
|
DRM_FORMAT_XRGB2101010,
|
|
DRM_FORMAT_XBGR2101010,
|
|
DRM_FORMAT_YUYV,
|
|
DRM_FORMAT_YVYU,
|
|
DRM_FORMAT_UYVY,
|
|
DRM_FORMAT_VYUY,
|
|
};
|
|
|
|
/* Cursor formats */
|
|
static const uint32_t intel_cursor_formats[] = {
|
|
DRM_FORMAT_ARGB8888,
|
|
};
|
|
|
|
static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);
|
|
|
|
static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *pipe_config);
|
|
static void ironlake_pch_clock_get(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *pipe_config);
|
|
|
|
static int intel_framebuffer_init(struct drm_device *dev,
|
|
struct intel_framebuffer *ifb,
|
|
struct drm_mode_fb_cmd2 *mode_cmd,
|
|
struct drm_i915_gem_object *obj);
|
|
static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc);
|
|
static void intel_set_pipe_timings(struct intel_crtc *intel_crtc);
|
|
static void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
|
|
struct intel_link_m_n *m_n,
|
|
struct intel_link_m_n *m2_n2);
|
|
static void ironlake_set_pipeconf(struct drm_crtc *crtc);
|
|
static void haswell_set_pipeconf(struct drm_crtc *crtc);
|
|
static void intel_set_pipe_csc(struct drm_crtc *crtc);
|
|
static void vlv_prepare_pll(struct intel_crtc *crtc,
|
|
const struct intel_crtc_state *pipe_config);
|
|
static void chv_prepare_pll(struct intel_crtc *crtc,
|
|
const struct intel_crtc_state *pipe_config);
|
|
static void intel_begin_crtc_commit(struct drm_crtc *, struct drm_crtc_state *);
|
|
static void intel_finish_crtc_commit(struct drm_crtc *, struct drm_crtc_state *);
|
|
static void skl_init_scalers(struct drm_device *dev, struct intel_crtc *intel_crtc,
|
|
struct intel_crtc_state *crtc_state);
|
|
static int i9xx_get_refclk(const struct intel_crtc_state *crtc_state,
|
|
int num_connectors);
|
|
static void skylake_pfit_enable(struct intel_crtc *crtc);
|
|
static void ironlake_pfit_disable(struct intel_crtc *crtc, bool force);
|
|
static void ironlake_pfit_enable(struct intel_crtc *crtc);
|
|
static void intel_modeset_setup_hw_state(struct drm_device *dev);
|
|
|
|
typedef struct {
|
|
int min, max;
|
|
} intel_range_t;
|
|
|
|
typedef struct {
|
|
int dot_limit;
|
|
int p2_slow, p2_fast;
|
|
} intel_p2_t;
|
|
|
|
typedef struct intel_limit intel_limit_t;
|
|
struct intel_limit {
|
|
intel_range_t dot, vco, n, m, m1, m2, p, p1;
|
|
intel_p2_t p2;
|
|
};
|
|
|
|
/* returns HPLL frequency in kHz */
|
|
static int valleyview_get_vco(struct drm_i915_private *dev_priv)
|
|
{
|
|
int hpll_freq, vco_freq[] = { 800, 1600, 2000, 2400 };
|
|
|
|
/* Obtain SKU information */
|
|
mutex_lock(&dev_priv->sb_lock);
|
|
hpll_freq = vlv_cck_read(dev_priv, CCK_FUSE_REG) &
|
|
CCK_FUSE_HPLL_FREQ_MASK;
|
|
mutex_unlock(&dev_priv->sb_lock);
|
|
|
|
return vco_freq[hpll_freq] * 1000;
|
|
}
|
|
|
|
static int vlv_get_cck_clock_hpll(struct drm_i915_private *dev_priv,
|
|
const char *name, u32 reg)
|
|
{
|
|
u32 val;
|
|
int divider;
|
|
|
|
if (dev_priv->hpll_freq == 0)
|
|
dev_priv->hpll_freq = valleyview_get_vco(dev_priv);
|
|
|
|
mutex_lock(&dev_priv->sb_lock);
|
|
val = vlv_cck_read(dev_priv, reg);
|
|
mutex_unlock(&dev_priv->sb_lock);
|
|
|
|
divider = val & CCK_FREQUENCY_VALUES;
|
|
|
|
WARN((val & CCK_FREQUENCY_STATUS) !=
|
|
(divider << CCK_FREQUENCY_STATUS_SHIFT),
|
|
"%s change in progress\n", name);
|
|
|
|
return DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, divider + 1);
|
|
}
|
|
|
|
int
|
|
intel_pch_rawclk(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
WARN_ON(!HAS_PCH_SPLIT(dev));
|
|
|
|
return I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK;
|
|
}
|
|
|
|
/* hrawclock is 1/4 the FSB frequency */
|
|
int intel_hrawclk(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t clkcfg;
|
|
|
|
/* There is no CLKCFG reg in Valleyview. VLV hrawclk is 200 MHz */
|
|
if (IS_VALLEYVIEW(dev))
|
|
return 200;
|
|
|
|
clkcfg = I915_READ(CLKCFG);
|
|
switch (clkcfg & CLKCFG_FSB_MASK) {
|
|
case CLKCFG_FSB_400:
|
|
return 100;
|
|
case CLKCFG_FSB_533:
|
|
return 133;
|
|
case CLKCFG_FSB_667:
|
|
return 166;
|
|
case CLKCFG_FSB_800:
|
|
return 200;
|
|
case CLKCFG_FSB_1067:
|
|
return 266;
|
|
case CLKCFG_FSB_1333:
|
|
return 333;
|
|
/* these two are just a guess; one of them might be right */
|
|
case CLKCFG_FSB_1600:
|
|
case CLKCFG_FSB_1600_ALT:
|
|
return 400;
|
|
default:
|
|
return 133;
|
|
}
|
|
}
|
|
|
|
static void intel_update_czclk(struct drm_i915_private *dev_priv)
|
|
{
|
|
if (!IS_VALLEYVIEW(dev_priv))
|
|
return;
|
|
|
|
dev_priv->czclk_freq = vlv_get_cck_clock_hpll(dev_priv, "czclk",
|
|
CCK_CZ_CLOCK_CONTROL);
|
|
|
|
DRM_DEBUG_DRIVER("CZ clock rate: %d kHz\n", dev_priv->czclk_freq);
|
|
}
|
|
|
|
static inline u32 /* units of 100MHz */
|
|
intel_fdi_link_freq(struct drm_device *dev)
|
|
{
|
|
if (IS_GEN5(dev)) {
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2;
|
|
} else
|
|
return 27;
|
|
}
|
|
|
|
static const intel_limit_t intel_limits_i8xx_dac = {
|
|
.dot = { .min = 25000, .max = 350000 },
|
|
.vco = { .min = 908000, .max = 1512000 },
|
|
.n = { .min = 2, .max = 16 },
|
|
.m = { .min = 96, .max = 140 },
|
|
.m1 = { .min = 18, .max = 26 },
|
|
.m2 = { .min = 6, .max = 16 },
|
|
.p = { .min = 4, .max = 128 },
|
|
.p1 = { .min = 2, .max = 33 },
|
|
.p2 = { .dot_limit = 165000,
|
|
.p2_slow = 4, .p2_fast = 2 },
|
|
};
|
|
|
|
static const intel_limit_t intel_limits_i8xx_dvo = {
|
|
.dot = { .min = 25000, .max = 350000 },
|
|
.vco = { .min = 908000, .max = 1512000 },
|
|
.n = { .min = 2, .max = 16 },
|
|
.m = { .min = 96, .max = 140 },
|
|
.m1 = { .min = 18, .max = 26 },
|
|
.m2 = { .min = 6, .max = 16 },
|
|
.p = { .min = 4, .max = 128 },
|
|
.p1 = { .min = 2, .max = 33 },
|
|
.p2 = { .dot_limit = 165000,
|
|
.p2_slow = 4, .p2_fast = 4 },
|
|
};
|
|
|
|
static const intel_limit_t intel_limits_i8xx_lvds = {
|
|
.dot = { .min = 25000, .max = 350000 },
|
|
.vco = { .min = 908000, .max = 1512000 },
|
|
.n = { .min = 2, .max = 16 },
|
|
.m = { .min = 96, .max = 140 },
|
|
.m1 = { .min = 18, .max = 26 },
|
|
.m2 = { .min = 6, .max = 16 },
|
|
.p = { .min = 4, .max = 128 },
|
|
.p1 = { .min = 1, .max = 6 },
|
|
.p2 = { .dot_limit = 165000,
|
|
.p2_slow = 14, .p2_fast = 7 },
|
|
};
|
|
|
|
static const intel_limit_t intel_limits_i9xx_sdvo = {
|
|
.dot = { .min = 20000, .max = 400000 },
|
|
.vco = { .min = 1400000, .max = 2800000 },
|
|
.n = { .min = 1, .max = 6 },
|
|
.m = { .min = 70, .max = 120 },
|
|
.m1 = { .min = 8, .max = 18 },
|
|
.m2 = { .min = 3, .max = 7 },
|
|
.p = { .min = 5, .max = 80 },
|
|
.p1 = { .min = 1, .max = 8 },
|
|
.p2 = { .dot_limit = 200000,
|
|
.p2_slow = 10, .p2_fast = 5 },
|
|
};
|
|
|
|
static const intel_limit_t intel_limits_i9xx_lvds = {
|
|
.dot = { .min = 20000, .max = 400000 },
|
|
.vco = { .min = 1400000, .max = 2800000 },
|
|
.n = { .min = 1, .max = 6 },
|
|
.m = { .min = 70, .max = 120 },
|
|
.m1 = { .min = 8, .max = 18 },
|
|
.m2 = { .min = 3, .max = 7 },
|
|
.p = { .min = 7, .max = 98 },
|
|
.p1 = { .min = 1, .max = 8 },
|
|
.p2 = { .dot_limit = 112000,
|
|
.p2_slow = 14, .p2_fast = 7 },
|
|
};
|
|
|
|
|
|
static const intel_limit_t intel_limits_g4x_sdvo = {
|
|
.dot = { .min = 25000, .max = 270000 },
|
|
.vco = { .min = 1750000, .max = 3500000},
|
|
.n = { .min = 1, .max = 4 },
|
|
.m = { .min = 104, .max = 138 },
|
|
.m1 = { .min = 17, .max = 23 },
|
|
.m2 = { .min = 5, .max = 11 },
|
|
.p = { .min = 10, .max = 30 },
|
|
.p1 = { .min = 1, .max = 3},
|
|
.p2 = { .dot_limit = 270000,
|
|
.p2_slow = 10,
|
|
.p2_fast = 10
|
|
},
|
|
};
|
|
|
|
static const intel_limit_t intel_limits_g4x_hdmi = {
|
|
.dot = { .min = 22000, .max = 400000 },
|
|
.vco = { .min = 1750000, .max = 3500000},
|
|
.n = { .min = 1, .max = 4 },
|
|
.m = { .min = 104, .max = 138 },
|
|
.m1 = { .min = 16, .max = 23 },
|
|
.m2 = { .min = 5, .max = 11 },
|
|
.p = { .min = 5, .max = 80 },
|
|
.p1 = { .min = 1, .max = 8},
|
|
.p2 = { .dot_limit = 165000,
|
|
.p2_slow = 10, .p2_fast = 5 },
|
|
};
|
|
|
|
static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
|
|
.dot = { .min = 20000, .max = 115000 },
|
|
.vco = { .min = 1750000, .max = 3500000 },
|
|
.n = { .min = 1, .max = 3 },
|
|
.m = { .min = 104, .max = 138 },
|
|
.m1 = { .min = 17, .max = 23 },
|
|
.m2 = { .min = 5, .max = 11 },
|
|
.p = { .min = 28, .max = 112 },
|
|
.p1 = { .min = 2, .max = 8 },
|
|
.p2 = { .dot_limit = 0,
|
|
.p2_slow = 14, .p2_fast = 14
|
|
},
|
|
};
|
|
|
|
static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
|
|
.dot = { .min = 80000, .max = 224000 },
|
|
.vco = { .min = 1750000, .max = 3500000 },
|
|
.n = { .min = 1, .max = 3 },
|
|
.m = { .min = 104, .max = 138 },
|
|
.m1 = { .min = 17, .max = 23 },
|
|
.m2 = { .min = 5, .max = 11 },
|
|
.p = { .min = 14, .max = 42 },
|
|
.p1 = { .min = 2, .max = 6 },
|
|
.p2 = { .dot_limit = 0,
|
|
.p2_slow = 7, .p2_fast = 7
|
|
},
|
|
};
|
|
|
|
static const intel_limit_t intel_limits_pineview_sdvo = {
|
|
.dot = { .min = 20000, .max = 400000},
|
|
.vco = { .min = 1700000, .max = 3500000 },
|
|
/* Pineview's Ncounter is a ring counter */
|
|
.n = { .min = 3, .max = 6 },
|
|
.m = { .min = 2, .max = 256 },
|
|
/* Pineview only has one combined m divider, which we treat as m2. */
|
|
.m1 = { .min = 0, .max = 0 },
|
|
.m2 = { .min = 0, .max = 254 },
|
|
.p = { .min = 5, .max = 80 },
|
|
.p1 = { .min = 1, .max = 8 },
|
|
.p2 = { .dot_limit = 200000,
|
|
.p2_slow = 10, .p2_fast = 5 },
|
|
};
|
|
|
|
static const intel_limit_t intel_limits_pineview_lvds = {
|
|
.dot = { .min = 20000, .max = 400000 },
|
|
.vco = { .min = 1700000, .max = 3500000 },
|
|
.n = { .min = 3, .max = 6 },
|
|
.m = { .min = 2, .max = 256 },
|
|
.m1 = { .min = 0, .max = 0 },
|
|
.m2 = { .min = 0, .max = 254 },
|
|
.p = { .min = 7, .max = 112 },
|
|
.p1 = { .min = 1, .max = 8 },
|
|
.p2 = { .dot_limit = 112000,
|
|
.p2_slow = 14, .p2_fast = 14 },
|
|
};
|
|
|
|
/* Ironlake / Sandybridge
|
|
*
|
|
* We calculate clock using (register_value + 2) for N/M1/M2, so here
|
|
* the range value for them is (actual_value - 2).
|
|
*/
|
|
static const intel_limit_t intel_limits_ironlake_dac = {
|
|
.dot = { .min = 25000, .max = 350000 },
|
|
.vco = { .min = 1760000, .max = 3510000 },
|
|
.n = { .min = 1, .max = 5 },
|
|
.m = { .min = 79, .max = 127 },
|
|
.m1 = { .min = 12, .max = 22 },
|
|
.m2 = { .min = 5, .max = 9 },
|
|
.p = { .min = 5, .max = 80 },
|
|
.p1 = { .min = 1, .max = 8 },
|
|
.p2 = { .dot_limit = 225000,
|
|
.p2_slow = 10, .p2_fast = 5 },
|
|
};
|
|
|
|
static const intel_limit_t intel_limits_ironlake_single_lvds = {
|
|
.dot = { .min = 25000, .max = 350000 },
|
|
.vco = { .min = 1760000, .max = 3510000 },
|
|
.n = { .min = 1, .max = 3 },
|
|
.m = { .min = 79, .max = 118 },
|
|
.m1 = { .min = 12, .max = 22 },
|
|
.m2 = { .min = 5, .max = 9 },
|
|
.p = { .min = 28, .max = 112 },
|
|
.p1 = { .min = 2, .max = 8 },
|
|
.p2 = { .dot_limit = 225000,
|
|
.p2_slow = 14, .p2_fast = 14 },
|
|
};
|
|
|
|
static const intel_limit_t intel_limits_ironlake_dual_lvds = {
|
|
.dot = { .min = 25000, .max = 350000 },
|
|
.vco = { .min = 1760000, .max = 3510000 },
|
|
.n = { .min = 1, .max = 3 },
|
|
.m = { .min = 79, .max = 127 },
|
|
.m1 = { .min = 12, .max = 22 },
|
|
.m2 = { .min = 5, .max = 9 },
|
|
.p = { .min = 14, .max = 56 },
|
|
.p1 = { .min = 2, .max = 8 },
|
|
.p2 = { .dot_limit = 225000,
|
|
.p2_slow = 7, .p2_fast = 7 },
|
|
};
|
|
|
|
/* LVDS 100mhz refclk limits. */
|
|
static const intel_limit_t intel_limits_ironlake_single_lvds_100m = {
|
|
.dot = { .min = 25000, .max = 350000 },
|
|
.vco = { .min = 1760000, .max = 3510000 },
|
|
.n = { .min = 1, .max = 2 },
|
|
.m = { .min = 79, .max = 126 },
|
|
.m1 = { .min = 12, .max = 22 },
|
|
.m2 = { .min = 5, .max = 9 },
|
|
.p = { .min = 28, .max = 112 },
|
|
.p1 = { .min = 2, .max = 8 },
|
|
.p2 = { .dot_limit = 225000,
|
|
.p2_slow = 14, .p2_fast = 14 },
|
|
};
|
|
|
|
static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
|
|
.dot = { .min = 25000, .max = 350000 },
|
|
.vco = { .min = 1760000, .max = 3510000 },
|
|
.n = { .min = 1, .max = 3 },
|
|
.m = { .min = 79, .max = 126 },
|
|
.m1 = { .min = 12, .max = 22 },
|
|
.m2 = { .min = 5, .max = 9 },
|
|
.p = { .min = 14, .max = 42 },
|
|
.p1 = { .min = 2, .max = 6 },
|
|
.p2 = { .dot_limit = 225000,
|
|
.p2_slow = 7, .p2_fast = 7 },
|
|
};
|
|
|
|
static const intel_limit_t intel_limits_vlv = {
|
|
/*
|
|
* These are the data rate limits (measured in fast clocks)
|
|
* since those are the strictest limits we have. The fast
|
|
* clock and actual rate limits are more relaxed, so checking
|
|
* them would make no difference.
|
|
*/
|
|
.dot = { .min = 25000 * 5, .max = 270000 * 5 },
|
|
.vco = { .min = 4000000, .max = 6000000 },
|
|
.n = { .min = 1, .max = 7 },
|
|
.m1 = { .min = 2, .max = 3 },
|
|
.m2 = { .min = 11, .max = 156 },
|
|
.p1 = { .min = 2, .max = 3 },
|
|
.p2 = { .p2_slow = 2, .p2_fast = 20 }, /* slow=min, fast=max */
|
|
};
|
|
|
|
static const intel_limit_t intel_limits_chv = {
|
|
/*
|
|
* These are the data rate limits (measured in fast clocks)
|
|
* since those are the strictest limits we have. The fast
|
|
* clock and actual rate limits are more relaxed, so checking
|
|
* them would make no difference.
|
|
*/
|
|
.dot = { .min = 25000 * 5, .max = 540000 * 5},
|
|
.vco = { .min = 4800000, .max = 6480000 },
|
|
.n = { .min = 1, .max = 1 },
|
|
.m1 = { .min = 2, .max = 2 },
|
|
.m2 = { .min = 24 << 22, .max = 175 << 22 },
|
|
.p1 = { .min = 2, .max = 4 },
|
|
.p2 = { .p2_slow = 1, .p2_fast = 14 },
|
|
};
|
|
|
|
static const intel_limit_t intel_limits_bxt = {
|
|
/* FIXME: find real dot limits */
|
|
.dot = { .min = 0, .max = INT_MAX },
|
|
.vco = { .min = 4800000, .max = 6700000 },
|
|
.n = { .min = 1, .max = 1 },
|
|
.m1 = { .min = 2, .max = 2 },
|
|
/* FIXME: find real m2 limits */
|
|
.m2 = { .min = 2 << 22, .max = 255 << 22 },
|
|
.p1 = { .min = 2, .max = 4 },
|
|
.p2 = { .p2_slow = 1, .p2_fast = 20 },
|
|
};
|
|
|
|
static bool
|
|
needs_modeset(struct drm_crtc_state *state)
|
|
{
|
|
return drm_atomic_crtc_needs_modeset(state);
|
|
}
|
|
|
|
/**
|
|
* Returns whether any output on the specified pipe is of the specified type
|
|
*/
|
|
bool intel_pipe_has_type(struct intel_crtc *crtc, enum intel_output_type type)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct intel_encoder *encoder;
|
|
|
|
for_each_encoder_on_crtc(dev, &crtc->base, encoder)
|
|
if (encoder->type == type)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
/**
|
|
* Returns whether any output on the specified pipe will have the specified
|
|
* type after a staged modeset is complete, i.e., the same as
|
|
* intel_pipe_has_type() but looking at encoder->new_crtc instead of
|
|
* encoder->crtc.
|
|
*/
|
|
static bool intel_pipe_will_have_type(const struct intel_crtc_state *crtc_state,
|
|
int type)
|
|
{
|
|
struct drm_atomic_state *state = crtc_state->base.state;
|
|
struct drm_connector *connector;
|
|
struct drm_connector_state *connector_state;
|
|
struct intel_encoder *encoder;
|
|
int i, num_connectors = 0;
|
|
|
|
for_each_connector_in_state(state, connector, connector_state, i) {
|
|
if (connector_state->crtc != crtc_state->base.crtc)
|
|
continue;
|
|
|
|
num_connectors++;
|
|
|
|
encoder = to_intel_encoder(connector_state->best_encoder);
|
|
if (encoder->type == type)
|
|
return true;
|
|
}
|
|
|
|
WARN_ON(num_connectors == 0);
|
|
|
|
return false;
|
|
}
|
|
|
|
static const intel_limit_t *
|
|
intel_ironlake_limit(struct intel_crtc_state *crtc_state, int refclk)
|
|
{
|
|
struct drm_device *dev = crtc_state->base.crtc->dev;
|
|
const intel_limit_t *limit;
|
|
|
|
if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
|
|
if (intel_is_dual_link_lvds(dev)) {
|
|
if (refclk == 100000)
|
|
limit = &intel_limits_ironlake_dual_lvds_100m;
|
|
else
|
|
limit = &intel_limits_ironlake_dual_lvds;
|
|
} else {
|
|
if (refclk == 100000)
|
|
limit = &intel_limits_ironlake_single_lvds_100m;
|
|
else
|
|
limit = &intel_limits_ironlake_single_lvds;
|
|
}
|
|
} else
|
|
limit = &intel_limits_ironlake_dac;
|
|
|
|
return limit;
|
|
}
|
|
|
|
static const intel_limit_t *
|
|
intel_g4x_limit(struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct drm_device *dev = crtc_state->base.crtc->dev;
|
|
const intel_limit_t *limit;
|
|
|
|
if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
|
|
if (intel_is_dual_link_lvds(dev))
|
|
limit = &intel_limits_g4x_dual_channel_lvds;
|
|
else
|
|
limit = &intel_limits_g4x_single_channel_lvds;
|
|
} else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_HDMI) ||
|
|
intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_ANALOG)) {
|
|
limit = &intel_limits_g4x_hdmi;
|
|
} else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_SDVO)) {
|
|
limit = &intel_limits_g4x_sdvo;
|
|
} else /* The option is for other outputs */
|
|
limit = &intel_limits_i9xx_sdvo;
|
|
|
|
return limit;
|
|
}
|
|
|
|
static const intel_limit_t *
|
|
intel_limit(struct intel_crtc_state *crtc_state, int refclk)
|
|
{
|
|
struct drm_device *dev = crtc_state->base.crtc->dev;
|
|
const intel_limit_t *limit;
|
|
|
|
if (IS_BROXTON(dev))
|
|
limit = &intel_limits_bxt;
|
|
else if (HAS_PCH_SPLIT(dev))
|
|
limit = intel_ironlake_limit(crtc_state, refclk);
|
|
else if (IS_G4X(dev)) {
|
|
limit = intel_g4x_limit(crtc_state);
|
|
} else if (IS_PINEVIEW(dev)) {
|
|
if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS))
|
|
limit = &intel_limits_pineview_lvds;
|
|
else
|
|
limit = &intel_limits_pineview_sdvo;
|
|
} else if (IS_CHERRYVIEW(dev)) {
|
|
limit = &intel_limits_chv;
|
|
} else if (IS_VALLEYVIEW(dev)) {
|
|
limit = &intel_limits_vlv;
|
|
} else if (!IS_GEN2(dev)) {
|
|
if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS))
|
|
limit = &intel_limits_i9xx_lvds;
|
|
else
|
|
limit = &intel_limits_i9xx_sdvo;
|
|
} else {
|
|
if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS))
|
|
limit = &intel_limits_i8xx_lvds;
|
|
else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_DVO))
|
|
limit = &intel_limits_i8xx_dvo;
|
|
else
|
|
limit = &intel_limits_i8xx_dac;
|
|
}
|
|
return limit;
|
|
}
|
|
|
|
/*
|
|
* Platform specific helpers to calculate the port PLL loopback- (clock.m),
|
|
* and post-divider (clock.p) values, pre- (clock.vco) and post-divided fast
|
|
* (clock.dot) clock rates. This fast dot clock is fed to the port's IO logic.
|
|
* The helpers' return value is the rate of the clock that is fed to the
|
|
* display engine's pipe which can be the above fast dot clock rate or a
|
|
* divided-down version of it.
|
|
*/
|
|
/* m1 is reserved as 0 in Pineview, n is a ring counter */
|
|
static int pnv_calc_dpll_params(int refclk, intel_clock_t *clock)
|
|
{
|
|
clock->m = clock->m2 + 2;
|
|
clock->p = clock->p1 * clock->p2;
|
|
if (WARN_ON(clock->n == 0 || clock->p == 0))
|
|
return 0;
|
|
clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
|
|
clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
|
|
|
|
return clock->dot;
|
|
}
|
|
|
|
static uint32_t i9xx_dpll_compute_m(struct dpll *dpll)
|
|
{
|
|
return 5 * (dpll->m1 + 2) + (dpll->m2 + 2);
|
|
}
|
|
|
|
static int i9xx_calc_dpll_params(int refclk, intel_clock_t *clock)
|
|
{
|
|
clock->m = i9xx_dpll_compute_m(clock);
|
|
clock->p = clock->p1 * clock->p2;
|
|
if (WARN_ON(clock->n + 2 == 0 || clock->p == 0))
|
|
return 0;
|
|
clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n + 2);
|
|
clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
|
|
|
|
return clock->dot;
|
|
}
|
|
|
|
static int vlv_calc_dpll_params(int refclk, intel_clock_t *clock)
|
|
{
|
|
clock->m = clock->m1 * clock->m2;
|
|
clock->p = clock->p1 * clock->p2;
|
|
if (WARN_ON(clock->n == 0 || clock->p == 0))
|
|
return 0;
|
|
clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
|
|
clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
|
|
|
|
return clock->dot / 5;
|
|
}
|
|
|
|
int chv_calc_dpll_params(int refclk, intel_clock_t *clock)
|
|
{
|
|
clock->m = clock->m1 * clock->m2;
|
|
clock->p = clock->p1 * clock->p2;
|
|
if (WARN_ON(clock->n == 0 || clock->p == 0))
|
|
return 0;
|
|
clock->vco = DIV_ROUND_CLOSEST_ULL((uint64_t)refclk * clock->m,
|
|
clock->n << 22);
|
|
clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
|
|
|
|
return clock->dot / 5;
|
|
}
|
|
|
|
#define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
|
|
/**
|
|
* Returns whether the given set of divisors are valid for a given refclk with
|
|
* the given connectors.
|
|
*/
|
|
|
|
static bool intel_PLL_is_valid(struct drm_device *dev,
|
|
const intel_limit_t *limit,
|
|
const intel_clock_t *clock)
|
|
{
|
|
if (clock->n < limit->n.min || limit->n.max < clock->n)
|
|
INTELPllInvalid("n out of range\n");
|
|
if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
|
|
INTELPllInvalid("p1 out of range\n");
|
|
if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
|
|
INTELPllInvalid("m2 out of range\n");
|
|
if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
|
|
INTELPllInvalid("m1 out of range\n");
|
|
|
|
if (!IS_PINEVIEW(dev) && !IS_VALLEYVIEW(dev) && !IS_BROXTON(dev))
|
|
if (clock->m1 <= clock->m2)
|
|
INTELPllInvalid("m1 <= m2\n");
|
|
|
|
if (!IS_VALLEYVIEW(dev) && !IS_BROXTON(dev)) {
|
|
if (clock->p < limit->p.min || limit->p.max < clock->p)
|
|
INTELPllInvalid("p out of range\n");
|
|
if (clock->m < limit->m.min || limit->m.max < clock->m)
|
|
INTELPllInvalid("m out of range\n");
|
|
}
|
|
|
|
if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
|
|
INTELPllInvalid("vco out of range\n");
|
|
/* XXX: We may need to be checking "Dot clock" depending on the multiplier,
|
|
* connector, etc., rather than just a single range.
|
|
*/
|
|
if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
|
|
INTELPllInvalid("dot out of range\n");
|
|
|
|
return true;
|
|
}
|
|
|
|
static int
|
|
i9xx_select_p2_div(const intel_limit_t *limit,
|
|
const struct intel_crtc_state *crtc_state,
|
|
int target)
|
|
{
|
|
struct drm_device *dev = crtc_state->base.crtc->dev;
|
|
|
|
if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
|
|
/*
|
|
* For LVDS just rely on its current settings for dual-channel.
|
|
* We haven't figured out how to reliably set up different
|
|
* single/dual channel state, if we even can.
|
|
*/
|
|
if (intel_is_dual_link_lvds(dev))
|
|
return limit->p2.p2_fast;
|
|
else
|
|
return limit->p2.p2_slow;
|
|
} else {
|
|
if (target < limit->p2.dot_limit)
|
|
return limit->p2.p2_slow;
|
|
else
|
|
return limit->p2.p2_fast;
|
|
}
|
|
}
|
|
|
|
static bool
|
|
i9xx_find_best_dpll(const intel_limit_t *limit,
|
|
struct intel_crtc_state *crtc_state,
|
|
int target, int refclk, intel_clock_t *match_clock,
|
|
intel_clock_t *best_clock)
|
|
{
|
|
struct drm_device *dev = crtc_state->base.crtc->dev;
|
|
intel_clock_t clock;
|
|
int err = target;
|
|
|
|
memset(best_clock, 0, sizeof(*best_clock));
|
|
|
|
clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
|
|
|
|
for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
|
|
clock.m1++) {
|
|
for (clock.m2 = limit->m2.min;
|
|
clock.m2 <= limit->m2.max; clock.m2++) {
|
|
if (clock.m2 >= clock.m1)
|
|
break;
|
|
for (clock.n = limit->n.min;
|
|
clock.n <= limit->n.max; clock.n++) {
|
|
for (clock.p1 = limit->p1.min;
|
|
clock.p1 <= limit->p1.max; clock.p1++) {
|
|
int this_err;
|
|
|
|
i9xx_calc_dpll_params(refclk, &clock);
|
|
if (!intel_PLL_is_valid(dev, limit,
|
|
&clock))
|
|
continue;
|
|
if (match_clock &&
|
|
clock.p != match_clock->p)
|
|
continue;
|
|
|
|
this_err = abs(clock.dot - target);
|
|
if (this_err < err) {
|
|
*best_clock = clock;
|
|
err = this_err;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
return (err != target);
|
|
}
|
|
|
|
static bool
|
|
pnv_find_best_dpll(const intel_limit_t *limit,
|
|
struct intel_crtc_state *crtc_state,
|
|
int target, int refclk, intel_clock_t *match_clock,
|
|
intel_clock_t *best_clock)
|
|
{
|
|
struct drm_device *dev = crtc_state->base.crtc->dev;
|
|
intel_clock_t clock;
|
|
int err = target;
|
|
|
|
memset(best_clock, 0, sizeof(*best_clock));
|
|
|
|
clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
|
|
|
|
for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
|
|
clock.m1++) {
|
|
for (clock.m2 = limit->m2.min;
|
|
clock.m2 <= limit->m2.max; clock.m2++) {
|
|
for (clock.n = limit->n.min;
|
|
clock.n <= limit->n.max; clock.n++) {
|
|
for (clock.p1 = limit->p1.min;
|
|
clock.p1 <= limit->p1.max; clock.p1++) {
|
|
int this_err;
|
|
|
|
pnv_calc_dpll_params(refclk, &clock);
|
|
if (!intel_PLL_is_valid(dev, limit,
|
|
&clock))
|
|
continue;
|
|
if (match_clock &&
|
|
clock.p != match_clock->p)
|
|
continue;
|
|
|
|
this_err = abs(clock.dot - target);
|
|
if (this_err < err) {
|
|
*best_clock = clock;
|
|
err = this_err;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
return (err != target);
|
|
}
|
|
|
|
static bool
|
|
g4x_find_best_dpll(const intel_limit_t *limit,
|
|
struct intel_crtc_state *crtc_state,
|
|
int target, int refclk, intel_clock_t *match_clock,
|
|
intel_clock_t *best_clock)
|
|
{
|
|
struct drm_device *dev = crtc_state->base.crtc->dev;
|
|
intel_clock_t clock;
|
|
int max_n;
|
|
bool found = false;
|
|
/* approximately equals target * 0.00585 */
|
|
int err_most = (target >> 8) + (target >> 9);
|
|
|
|
memset(best_clock, 0, sizeof(*best_clock));
|
|
|
|
clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
|
|
|
|
max_n = limit->n.max;
|
|
/* based on hardware requirement, prefer smaller n to precision */
|
|
for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
|
|
/* based on hardware requirement, prefere larger m1,m2 */
|
|
for (clock.m1 = limit->m1.max;
|
|
clock.m1 >= limit->m1.min; clock.m1--) {
|
|
for (clock.m2 = limit->m2.max;
|
|
clock.m2 >= limit->m2.min; clock.m2--) {
|
|
for (clock.p1 = limit->p1.max;
|
|
clock.p1 >= limit->p1.min; clock.p1--) {
|
|
int this_err;
|
|
|
|
i9xx_calc_dpll_params(refclk, &clock);
|
|
if (!intel_PLL_is_valid(dev, limit,
|
|
&clock))
|
|
continue;
|
|
|
|
this_err = abs(clock.dot - target);
|
|
if (this_err < err_most) {
|
|
*best_clock = clock;
|
|
err_most = this_err;
|
|
max_n = clock.n;
|
|
found = true;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return found;
|
|
}
|
|
|
|
/*
|
|
* Check if the calculated PLL configuration is more optimal compared to the
|
|
* best configuration and error found so far. Return the calculated error.
|
|
*/
|
|
static bool vlv_PLL_is_optimal(struct drm_device *dev, int target_freq,
|
|
const intel_clock_t *calculated_clock,
|
|
const intel_clock_t *best_clock,
|
|
unsigned int best_error_ppm,
|
|
unsigned int *error_ppm)
|
|
{
|
|
/*
|
|
* For CHV ignore the error and consider only the P value.
|
|
* Prefer a bigger P value based on HW requirements.
|
|
*/
|
|
if (IS_CHERRYVIEW(dev)) {
|
|
*error_ppm = 0;
|
|
|
|
return calculated_clock->p > best_clock->p;
|
|
}
|
|
|
|
if (WARN_ON_ONCE(!target_freq))
|
|
return false;
|
|
|
|
*error_ppm = div_u64(1000000ULL *
|
|
abs(target_freq - calculated_clock->dot),
|
|
target_freq);
|
|
/*
|
|
* Prefer a better P value over a better (smaller) error if the error
|
|
* is small. Ensure this preference for future configurations too by
|
|
* setting the error to 0.
|
|
*/
|
|
if (*error_ppm < 100 && calculated_clock->p > best_clock->p) {
|
|
*error_ppm = 0;
|
|
|
|
return true;
|
|
}
|
|
|
|
return *error_ppm + 10 < best_error_ppm;
|
|
}
|
|
|
|
static bool
|
|
vlv_find_best_dpll(const intel_limit_t *limit,
|
|
struct intel_crtc_state *crtc_state,
|
|
int target, int refclk, intel_clock_t *match_clock,
|
|
intel_clock_t *best_clock)
|
|
{
|
|
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
|
|
struct drm_device *dev = crtc->base.dev;
|
|
intel_clock_t clock;
|
|
unsigned int bestppm = 1000000;
|
|
/* min update 19.2 MHz */
|
|
int max_n = min(limit->n.max, refclk / 19200);
|
|
bool found = false;
|
|
|
|
target *= 5; /* fast clock */
|
|
|
|
memset(best_clock, 0, sizeof(*best_clock));
|
|
|
|
/* based on hardware requirement, prefer smaller n to precision */
|
|
for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
|
|
for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
|
|
for (clock.p2 = limit->p2.p2_fast; clock.p2 >= limit->p2.p2_slow;
|
|
clock.p2 -= clock.p2 > 10 ? 2 : 1) {
|
|
clock.p = clock.p1 * clock.p2;
|
|
/* based on hardware requirement, prefer bigger m1,m2 values */
|
|
for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
|
|
unsigned int ppm;
|
|
|
|
clock.m2 = DIV_ROUND_CLOSEST(target * clock.p * clock.n,
|
|
refclk * clock.m1);
|
|
|
|
vlv_calc_dpll_params(refclk, &clock);
|
|
|
|
if (!intel_PLL_is_valid(dev, limit,
|
|
&clock))
|
|
continue;
|
|
|
|
if (!vlv_PLL_is_optimal(dev, target,
|
|
&clock,
|
|
best_clock,
|
|
bestppm, &ppm))
|
|
continue;
|
|
|
|
*best_clock = clock;
|
|
bestppm = ppm;
|
|
found = true;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
return found;
|
|
}
|
|
|
|
static bool
|
|
chv_find_best_dpll(const intel_limit_t *limit,
|
|
struct intel_crtc_state *crtc_state,
|
|
int target, int refclk, intel_clock_t *match_clock,
|
|
intel_clock_t *best_clock)
|
|
{
|
|
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
|
|
struct drm_device *dev = crtc->base.dev;
|
|
unsigned int best_error_ppm;
|
|
intel_clock_t clock;
|
|
uint64_t m2;
|
|
int found = false;
|
|
|
|
memset(best_clock, 0, sizeof(*best_clock));
|
|
best_error_ppm = 1000000;
|
|
|
|
/*
|
|
* Based on hardware doc, the n always set to 1, and m1 always
|
|
* set to 2. If requires to support 200Mhz refclk, we need to
|
|
* revisit this because n may not 1 anymore.
|
|
*/
|
|
clock.n = 1, clock.m1 = 2;
|
|
target *= 5; /* fast clock */
|
|
|
|
for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
|
|
for (clock.p2 = limit->p2.p2_fast;
|
|
clock.p2 >= limit->p2.p2_slow;
|
|
clock.p2 -= clock.p2 > 10 ? 2 : 1) {
|
|
unsigned int error_ppm;
|
|
|
|
clock.p = clock.p1 * clock.p2;
|
|
|
|
m2 = DIV_ROUND_CLOSEST_ULL(((uint64_t)target * clock.p *
|
|
clock.n) << 22, refclk * clock.m1);
|
|
|
|
if (m2 > INT_MAX/clock.m1)
|
|
continue;
|
|
|
|
clock.m2 = m2;
|
|
|
|
chv_calc_dpll_params(refclk, &clock);
|
|
|
|
if (!intel_PLL_is_valid(dev, limit, &clock))
|
|
continue;
|
|
|
|
if (!vlv_PLL_is_optimal(dev, target, &clock, best_clock,
|
|
best_error_ppm, &error_ppm))
|
|
continue;
|
|
|
|
*best_clock = clock;
|
|
best_error_ppm = error_ppm;
|
|
found = true;
|
|
}
|
|
}
|
|
|
|
return found;
|
|
}
|
|
|
|
bool bxt_find_best_dpll(struct intel_crtc_state *crtc_state, int target_clock,
|
|
intel_clock_t *best_clock)
|
|
{
|
|
int refclk = i9xx_get_refclk(crtc_state, 0);
|
|
|
|
return chv_find_best_dpll(intel_limit(crtc_state, refclk), crtc_state,
|
|
target_clock, refclk, NULL, best_clock);
|
|
}
|
|
|
|
bool intel_crtc_active(struct drm_crtc *crtc)
|
|
{
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
|
|
/* Be paranoid as we can arrive here with only partial
|
|
* state retrieved from the hardware during setup.
|
|
*
|
|
* We can ditch the adjusted_mode.crtc_clock check as soon
|
|
* as Haswell has gained clock readout/fastboot support.
|
|
*
|
|
* We can ditch the crtc->primary->fb check as soon as we can
|
|
* properly reconstruct framebuffers.
|
|
*
|
|
* FIXME: The intel_crtc->active here should be switched to
|
|
* crtc->state->active once we have proper CRTC states wired up
|
|
* for atomic.
|
|
*/
|
|
return intel_crtc->active && crtc->primary->state->fb &&
|
|
intel_crtc->config->base.adjusted_mode.crtc_clock;
|
|
}
|
|
|
|
enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe)
|
|
{
|
|
struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
|
|
return intel_crtc->config->cpu_transcoder;
|
|
}
|
|
|
|
static bool pipe_dsl_stopped(struct drm_device *dev, enum pipe pipe)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
i915_reg_t reg = PIPEDSL(pipe);
|
|
u32 line1, line2;
|
|
u32 line_mask;
|
|
|
|
if (IS_GEN2(dev))
|
|
line_mask = DSL_LINEMASK_GEN2;
|
|
else
|
|
line_mask = DSL_LINEMASK_GEN3;
|
|
|
|
line1 = I915_READ(reg) & line_mask;
|
|
msleep(5);
|
|
line2 = I915_READ(reg) & line_mask;
|
|
|
|
return line1 == line2;
|
|
}
|
|
|
|
/*
|
|
* intel_wait_for_pipe_off - wait for pipe to turn off
|
|
* @crtc: crtc whose pipe to wait for
|
|
*
|
|
* After disabling a pipe, we can't wait for vblank in the usual way,
|
|
* spinning on the vblank interrupt status bit, since we won't actually
|
|
* see an interrupt when the pipe is disabled.
|
|
*
|
|
* On Gen4 and above:
|
|
* wait for the pipe register state bit to turn off
|
|
*
|
|
* Otherwise:
|
|
* wait for the display line value to settle (it usually
|
|
* ends up stopping at the start of the next frame).
|
|
*
|
|
*/
|
|
static void intel_wait_for_pipe_off(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
|
|
enum pipe pipe = crtc->pipe;
|
|
|
|
if (INTEL_INFO(dev)->gen >= 4) {
|
|
i915_reg_t reg = PIPECONF(cpu_transcoder);
|
|
|
|
/* Wait for the Pipe State to go off */
|
|
if (wait_for((I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0,
|
|
100))
|
|
WARN(1, "pipe_off wait timed out\n");
|
|
} else {
|
|
/* Wait for the display line to settle */
|
|
if (wait_for(pipe_dsl_stopped(dev, pipe), 100))
|
|
WARN(1, "pipe_off wait timed out\n");
|
|
}
|
|
}
|
|
|
|
static const char *state_string(bool enabled)
|
|
{
|
|
return enabled ? "on" : "off";
|
|
}
|
|
|
|
/* Only for pre-ILK configs */
|
|
void assert_pll(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, bool state)
|
|
{
|
|
u32 val;
|
|
bool cur_state;
|
|
|
|
val = I915_READ(DPLL(pipe));
|
|
cur_state = !!(val & DPLL_VCO_ENABLE);
|
|
I915_STATE_WARN(cur_state != state,
|
|
"PLL state assertion failure (expected %s, current %s)\n",
|
|
state_string(state), state_string(cur_state));
|
|
}
|
|
|
|
/* XXX: the dsi pll is shared between MIPI DSI ports */
|
|
static void assert_dsi_pll(struct drm_i915_private *dev_priv, bool state)
|
|
{
|
|
u32 val;
|
|
bool cur_state;
|
|
|
|
mutex_lock(&dev_priv->sb_lock);
|
|
val = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
|
|
mutex_unlock(&dev_priv->sb_lock);
|
|
|
|
cur_state = val & DSI_PLL_VCO_EN;
|
|
I915_STATE_WARN(cur_state != state,
|
|
"DSI PLL state assertion failure (expected %s, current %s)\n",
|
|
state_string(state), state_string(cur_state));
|
|
}
|
|
#define assert_dsi_pll_enabled(d) assert_dsi_pll(d, true)
|
|
#define assert_dsi_pll_disabled(d) assert_dsi_pll(d, false)
|
|
|
|
struct intel_shared_dpll *
|
|
intel_crtc_to_shared_dpll(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
|
|
|
|
if (crtc->config->shared_dpll < 0)
|
|
return NULL;
|
|
|
|
return &dev_priv->shared_dplls[crtc->config->shared_dpll];
|
|
}
|
|
|
|
/* For ILK+ */
|
|
void assert_shared_dpll(struct drm_i915_private *dev_priv,
|
|
struct intel_shared_dpll *pll,
|
|
bool state)
|
|
{
|
|
bool cur_state;
|
|
struct intel_dpll_hw_state hw_state;
|
|
|
|
if (WARN (!pll,
|
|
"asserting DPLL %s with no DPLL\n", state_string(state)))
|
|
return;
|
|
|
|
cur_state = pll->get_hw_state(dev_priv, pll, &hw_state);
|
|
I915_STATE_WARN(cur_state != state,
|
|
"%s assertion failure (expected %s, current %s)\n",
|
|
pll->name, state_string(state), state_string(cur_state));
|
|
}
|
|
|
|
static void assert_fdi_tx(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, bool state)
|
|
{
|
|
bool cur_state;
|
|
enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
|
|
pipe);
|
|
|
|
if (HAS_DDI(dev_priv->dev)) {
|
|
/* DDI does not have a specific FDI_TX register */
|
|
u32 val = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
|
|
cur_state = !!(val & TRANS_DDI_FUNC_ENABLE);
|
|
} else {
|
|
u32 val = I915_READ(FDI_TX_CTL(pipe));
|
|
cur_state = !!(val & FDI_TX_ENABLE);
|
|
}
|
|
I915_STATE_WARN(cur_state != state,
|
|
"FDI TX state assertion failure (expected %s, current %s)\n",
|
|
state_string(state), state_string(cur_state));
|
|
}
|
|
#define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true)
|
|
#define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false)
|
|
|
|
static void assert_fdi_rx(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, bool state)
|
|
{
|
|
u32 val;
|
|
bool cur_state;
|
|
|
|
val = I915_READ(FDI_RX_CTL(pipe));
|
|
cur_state = !!(val & FDI_RX_ENABLE);
|
|
I915_STATE_WARN(cur_state != state,
|
|
"FDI RX state assertion failure (expected %s, current %s)\n",
|
|
state_string(state), state_string(cur_state));
|
|
}
|
|
#define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true)
|
|
#define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false)
|
|
|
|
static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe)
|
|
{
|
|
u32 val;
|
|
|
|
/* ILK FDI PLL is always enabled */
|
|
if (INTEL_INFO(dev_priv->dev)->gen == 5)
|
|
return;
|
|
|
|
/* On Haswell, DDI ports are responsible for the FDI PLL setup */
|
|
if (HAS_DDI(dev_priv->dev))
|
|
return;
|
|
|
|
val = I915_READ(FDI_TX_CTL(pipe));
|
|
I915_STATE_WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
|
|
}
|
|
|
|
void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, bool state)
|
|
{
|
|
u32 val;
|
|
bool cur_state;
|
|
|
|
val = I915_READ(FDI_RX_CTL(pipe));
|
|
cur_state = !!(val & FDI_RX_PLL_ENABLE);
|
|
I915_STATE_WARN(cur_state != state,
|
|
"FDI RX PLL assertion failure (expected %s, current %s)\n",
|
|
state_string(state), state_string(cur_state));
|
|
}
|
|
|
|
void assert_panel_unlocked(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe)
|
|
{
|
|
struct drm_device *dev = dev_priv->dev;
|
|
i915_reg_t pp_reg;
|
|
u32 val;
|
|
enum pipe panel_pipe = PIPE_A;
|
|
bool locked = true;
|
|
|
|
if (WARN_ON(HAS_DDI(dev)))
|
|
return;
|
|
|
|
if (HAS_PCH_SPLIT(dev)) {
|
|
u32 port_sel;
|
|
|
|
pp_reg = PCH_PP_CONTROL;
|
|
port_sel = I915_READ(PCH_PP_ON_DELAYS) & PANEL_PORT_SELECT_MASK;
|
|
|
|
if (port_sel == PANEL_PORT_SELECT_LVDS &&
|
|
I915_READ(PCH_LVDS) & LVDS_PIPEB_SELECT)
|
|
panel_pipe = PIPE_B;
|
|
/* XXX: else fix for eDP */
|
|
} else if (IS_VALLEYVIEW(dev)) {
|
|
/* presumably write lock depends on pipe, not port select */
|
|
pp_reg = VLV_PIPE_PP_CONTROL(pipe);
|
|
panel_pipe = pipe;
|
|
} else {
|
|
pp_reg = PP_CONTROL;
|
|
if (I915_READ(LVDS) & LVDS_PIPEB_SELECT)
|
|
panel_pipe = PIPE_B;
|
|
}
|
|
|
|
val = I915_READ(pp_reg);
|
|
if (!(val & PANEL_POWER_ON) ||
|
|
((val & PANEL_UNLOCK_MASK) == PANEL_UNLOCK_REGS))
|
|
locked = false;
|
|
|
|
I915_STATE_WARN(panel_pipe == pipe && locked,
|
|
"panel assertion failure, pipe %c regs locked\n",
|
|
pipe_name(pipe));
|
|
}
|
|
|
|
static void assert_cursor(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, bool state)
|
|
{
|
|
struct drm_device *dev = dev_priv->dev;
|
|
bool cur_state;
|
|
|
|
if (IS_845G(dev) || IS_I865G(dev))
|
|
cur_state = I915_READ(CURCNTR(PIPE_A)) & CURSOR_ENABLE;
|
|
else
|
|
cur_state = I915_READ(CURCNTR(pipe)) & CURSOR_MODE;
|
|
|
|
I915_STATE_WARN(cur_state != state,
|
|
"cursor on pipe %c assertion failure (expected %s, current %s)\n",
|
|
pipe_name(pipe), state_string(state), state_string(cur_state));
|
|
}
|
|
#define assert_cursor_enabled(d, p) assert_cursor(d, p, true)
|
|
#define assert_cursor_disabled(d, p) assert_cursor(d, p, false)
|
|
|
|
void assert_pipe(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, bool state)
|
|
{
|
|
bool cur_state;
|
|
enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
|
|
pipe);
|
|
|
|
/* if we need the pipe quirk it must be always on */
|
|
if ((pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
|
|
(pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
|
|
state = true;
|
|
|
|
if (!intel_display_power_is_enabled(dev_priv,
|
|
POWER_DOMAIN_TRANSCODER(cpu_transcoder))) {
|
|
cur_state = false;
|
|
} else {
|
|
u32 val = I915_READ(PIPECONF(cpu_transcoder));
|
|
cur_state = !!(val & PIPECONF_ENABLE);
|
|
}
|
|
|
|
I915_STATE_WARN(cur_state != state,
|
|
"pipe %c assertion failure (expected %s, current %s)\n",
|
|
pipe_name(pipe), state_string(state), state_string(cur_state));
|
|
}
|
|
|
|
static void assert_plane(struct drm_i915_private *dev_priv,
|
|
enum plane plane, bool state)
|
|
{
|
|
u32 val;
|
|
bool cur_state;
|
|
|
|
val = I915_READ(DSPCNTR(plane));
|
|
cur_state = !!(val & DISPLAY_PLANE_ENABLE);
|
|
I915_STATE_WARN(cur_state != state,
|
|
"plane %c assertion failure (expected %s, current %s)\n",
|
|
plane_name(plane), state_string(state), state_string(cur_state));
|
|
}
|
|
|
|
#define assert_plane_enabled(d, p) assert_plane(d, p, true)
|
|
#define assert_plane_disabled(d, p) assert_plane(d, p, false)
|
|
|
|
static void assert_planes_disabled(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe)
|
|
{
|
|
struct drm_device *dev = dev_priv->dev;
|
|
int i;
|
|
|
|
/* Primary planes are fixed to pipes on gen4+ */
|
|
if (INTEL_INFO(dev)->gen >= 4) {
|
|
u32 val = I915_READ(DSPCNTR(pipe));
|
|
I915_STATE_WARN(val & DISPLAY_PLANE_ENABLE,
|
|
"plane %c assertion failure, should be disabled but not\n",
|
|
plane_name(pipe));
|
|
return;
|
|
}
|
|
|
|
/* Need to check both planes against the pipe */
|
|
for_each_pipe(dev_priv, i) {
|
|
u32 val = I915_READ(DSPCNTR(i));
|
|
enum pipe cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
|
|
DISPPLANE_SEL_PIPE_SHIFT;
|
|
I915_STATE_WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
|
|
"plane %c assertion failure, should be off on pipe %c but is still active\n",
|
|
plane_name(i), pipe_name(pipe));
|
|
}
|
|
}
|
|
|
|
static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe)
|
|
{
|
|
struct drm_device *dev = dev_priv->dev;
|
|
int sprite;
|
|
|
|
if (INTEL_INFO(dev)->gen >= 9) {
|
|
for_each_sprite(dev_priv, pipe, sprite) {
|
|
u32 val = I915_READ(PLANE_CTL(pipe, sprite));
|
|
I915_STATE_WARN(val & PLANE_CTL_ENABLE,
|
|
"plane %d assertion failure, should be off on pipe %c but is still active\n",
|
|
sprite, pipe_name(pipe));
|
|
}
|
|
} else if (IS_VALLEYVIEW(dev)) {
|
|
for_each_sprite(dev_priv, pipe, sprite) {
|
|
u32 val = I915_READ(SPCNTR(pipe, sprite));
|
|
I915_STATE_WARN(val & SP_ENABLE,
|
|
"sprite %c assertion failure, should be off on pipe %c but is still active\n",
|
|
sprite_name(pipe, sprite), pipe_name(pipe));
|
|
}
|
|
} else if (INTEL_INFO(dev)->gen >= 7) {
|
|
u32 val = I915_READ(SPRCTL(pipe));
|
|
I915_STATE_WARN(val & SPRITE_ENABLE,
|
|
"sprite %c assertion failure, should be off on pipe %c but is still active\n",
|
|
plane_name(pipe), pipe_name(pipe));
|
|
} else if (INTEL_INFO(dev)->gen >= 5) {
|
|
u32 val = I915_READ(DVSCNTR(pipe));
|
|
I915_STATE_WARN(val & DVS_ENABLE,
|
|
"sprite %c assertion failure, should be off on pipe %c but is still active\n",
|
|
plane_name(pipe), pipe_name(pipe));
|
|
}
|
|
}
|
|
|
|
static void assert_vblank_disabled(struct drm_crtc *crtc)
|
|
{
|
|
if (I915_STATE_WARN_ON(drm_crtc_vblank_get(crtc) == 0))
|
|
drm_crtc_vblank_put(crtc);
|
|
}
|
|
|
|
static void ibx_assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 val;
|
|
bool enabled;
|
|
|
|
I915_STATE_WARN_ON(!(HAS_PCH_IBX(dev_priv->dev) || HAS_PCH_CPT(dev_priv->dev)));
|
|
|
|
val = I915_READ(PCH_DREF_CONTROL);
|
|
enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK |
|
|
DREF_SUPERSPREAD_SOURCE_MASK));
|
|
I915_STATE_WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n");
|
|
}
|
|
|
|
static void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe)
|
|
{
|
|
u32 val;
|
|
bool enabled;
|
|
|
|
val = I915_READ(PCH_TRANSCONF(pipe));
|
|
enabled = !!(val & TRANS_ENABLE);
|
|
I915_STATE_WARN(enabled,
|
|
"transcoder assertion failed, should be off on pipe %c but is still active\n",
|
|
pipe_name(pipe));
|
|
}
|
|
|
|
static bool dp_pipe_enabled(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, u32 port_sel, u32 val)
|
|
{
|
|
if ((val & DP_PORT_EN) == 0)
|
|
return false;
|
|
|
|
if (HAS_PCH_CPT(dev_priv->dev)) {
|
|
u32 trans_dp_ctl = I915_READ(TRANS_DP_CTL(pipe));
|
|
if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel)
|
|
return false;
|
|
} else if (IS_CHERRYVIEW(dev_priv->dev)) {
|
|
if ((val & DP_PIPE_MASK_CHV) != DP_PIPE_SELECT_CHV(pipe))
|
|
return false;
|
|
} else {
|
|
if ((val & DP_PIPE_MASK) != (pipe << 30))
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, u32 val)
|
|
{
|
|
if ((val & SDVO_ENABLE) == 0)
|
|
return false;
|
|
|
|
if (HAS_PCH_CPT(dev_priv->dev)) {
|
|
if ((val & SDVO_PIPE_SEL_MASK_CPT) != SDVO_PIPE_SEL_CPT(pipe))
|
|
return false;
|
|
} else if (IS_CHERRYVIEW(dev_priv->dev)) {
|
|
if ((val & SDVO_PIPE_SEL_MASK_CHV) != SDVO_PIPE_SEL_CHV(pipe))
|
|
return false;
|
|
} else {
|
|
if ((val & SDVO_PIPE_SEL_MASK) != SDVO_PIPE_SEL(pipe))
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, u32 val)
|
|
{
|
|
if ((val & LVDS_PORT_EN) == 0)
|
|
return false;
|
|
|
|
if (HAS_PCH_CPT(dev_priv->dev)) {
|
|
if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
|
|
return false;
|
|
} else {
|
|
if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe))
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, u32 val)
|
|
{
|
|
if ((val & ADPA_DAC_ENABLE) == 0)
|
|
return false;
|
|
if (HAS_PCH_CPT(dev_priv->dev)) {
|
|
if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
|
|
return false;
|
|
} else {
|
|
if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe))
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, i915_reg_t reg,
|
|
u32 port_sel)
|
|
{
|
|
u32 val = I915_READ(reg);
|
|
I915_STATE_WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
|
|
"PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
|
|
i915_mmio_reg_offset(reg), pipe_name(pipe));
|
|
|
|
I915_STATE_WARN(HAS_PCH_IBX(dev_priv->dev) && (val & DP_PORT_EN) == 0
|
|
&& (val & DP_PIPEB_SELECT),
|
|
"IBX PCH dp port still using transcoder B\n");
|
|
}
|
|
|
|
static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, i915_reg_t reg)
|
|
{
|
|
u32 val = I915_READ(reg);
|
|
I915_STATE_WARN(hdmi_pipe_enabled(dev_priv, pipe, val),
|
|
"PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
|
|
i915_mmio_reg_offset(reg), pipe_name(pipe));
|
|
|
|
I915_STATE_WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_ENABLE) == 0
|
|
&& (val & SDVO_PIPE_B_SELECT),
|
|
"IBX PCH hdmi port still using transcoder B\n");
|
|
}
|
|
|
|
static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe)
|
|
{
|
|
u32 val;
|
|
|
|
assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
|
|
assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
|
|
assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
|
|
|
|
val = I915_READ(PCH_ADPA);
|
|
I915_STATE_WARN(adpa_pipe_enabled(dev_priv, pipe, val),
|
|
"PCH VGA enabled on transcoder %c, should be disabled\n",
|
|
pipe_name(pipe));
|
|
|
|
val = I915_READ(PCH_LVDS);
|
|
I915_STATE_WARN(lvds_pipe_enabled(dev_priv, pipe, val),
|
|
"PCH LVDS enabled on transcoder %c, should be disabled\n",
|
|
pipe_name(pipe));
|
|
|
|
assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIB);
|
|
assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIC);
|
|
assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMID);
|
|
}
|
|
|
|
static void vlv_enable_pll(struct intel_crtc *crtc,
|
|
const struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
i915_reg_t reg = DPLL(crtc->pipe);
|
|
u32 dpll = pipe_config->dpll_hw_state.dpll;
|
|
|
|
assert_pipe_disabled(dev_priv, crtc->pipe);
|
|
|
|
/* No really, not for ILK+ */
|
|
BUG_ON(!IS_VALLEYVIEW(dev_priv->dev));
|
|
|
|
/* PLL is protected by panel, make sure we can write it */
|
|
if (IS_MOBILE(dev_priv->dev))
|
|
assert_panel_unlocked(dev_priv, crtc->pipe);
|
|
|
|
I915_WRITE(reg, dpll);
|
|
POSTING_READ(reg);
|
|
udelay(150);
|
|
|
|
if (wait_for(((I915_READ(reg) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
|
|
DRM_ERROR("DPLL %d failed to lock\n", crtc->pipe);
|
|
|
|
I915_WRITE(DPLL_MD(crtc->pipe), pipe_config->dpll_hw_state.dpll_md);
|
|
POSTING_READ(DPLL_MD(crtc->pipe));
|
|
|
|
/* We do this three times for luck */
|
|
I915_WRITE(reg, dpll);
|
|
POSTING_READ(reg);
|
|
udelay(150); /* wait for warmup */
|
|
I915_WRITE(reg, dpll);
|
|
POSTING_READ(reg);
|
|
udelay(150); /* wait for warmup */
|
|
I915_WRITE(reg, dpll);
|
|
POSTING_READ(reg);
|
|
udelay(150); /* wait for warmup */
|
|
}
|
|
|
|
static void chv_enable_pll(struct intel_crtc *crtc,
|
|
const struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int pipe = crtc->pipe;
|
|
enum dpio_channel port = vlv_pipe_to_channel(pipe);
|
|
u32 tmp;
|
|
|
|
assert_pipe_disabled(dev_priv, crtc->pipe);
|
|
|
|
BUG_ON(!IS_CHERRYVIEW(dev_priv->dev));
|
|
|
|
mutex_lock(&dev_priv->sb_lock);
|
|
|
|
/* Enable back the 10bit clock to display controller */
|
|
tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
|
|
tmp |= DPIO_DCLKP_EN;
|
|
vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), tmp);
|
|
|
|
mutex_unlock(&dev_priv->sb_lock);
|
|
|
|
/*
|
|
* Need to wait > 100ns between dclkp clock enable bit and PLL enable.
|
|
*/
|
|
udelay(1);
|
|
|
|
/* Enable PLL */
|
|
I915_WRITE(DPLL(pipe), pipe_config->dpll_hw_state.dpll);
|
|
|
|
/* Check PLL is locked */
|
|
if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
|
|
DRM_ERROR("PLL %d failed to lock\n", pipe);
|
|
|
|
/* not sure when this should be written */
|
|
I915_WRITE(DPLL_MD(pipe), pipe_config->dpll_hw_state.dpll_md);
|
|
POSTING_READ(DPLL_MD(pipe));
|
|
}
|
|
|
|
static int intel_num_dvo_pipes(struct drm_device *dev)
|
|
{
|
|
struct intel_crtc *crtc;
|
|
int count = 0;
|
|
|
|
for_each_intel_crtc(dev, crtc)
|
|
count += crtc->base.state->active &&
|
|
intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO);
|
|
|
|
return count;
|
|
}
|
|
|
|
static void i9xx_enable_pll(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
i915_reg_t reg = DPLL(crtc->pipe);
|
|
u32 dpll = crtc->config->dpll_hw_state.dpll;
|
|
|
|
assert_pipe_disabled(dev_priv, crtc->pipe);
|
|
|
|
/* No really, not for ILK+ */
|
|
BUG_ON(INTEL_INFO(dev)->gen >= 5);
|
|
|
|
/* PLL is protected by panel, make sure we can write it */
|
|
if (IS_MOBILE(dev) && !IS_I830(dev))
|
|
assert_panel_unlocked(dev_priv, crtc->pipe);
|
|
|
|
/* Enable DVO 2x clock on both PLLs if necessary */
|
|
if (IS_I830(dev) && intel_num_dvo_pipes(dev) > 0) {
|
|
/*
|
|
* It appears to be important that we don't enable this
|
|
* for the current pipe before otherwise configuring the
|
|
* PLL. No idea how this should be handled if multiple
|
|
* DVO outputs are enabled simultaneosly.
|
|
*/
|
|
dpll |= DPLL_DVO_2X_MODE;
|
|
I915_WRITE(DPLL(!crtc->pipe),
|
|
I915_READ(DPLL(!crtc->pipe)) | DPLL_DVO_2X_MODE);
|
|
}
|
|
|
|
/* Wait for the clocks to stabilize. */
|
|
POSTING_READ(reg);
|
|
udelay(150);
|
|
|
|
if (INTEL_INFO(dev)->gen >= 4) {
|
|
I915_WRITE(DPLL_MD(crtc->pipe),
|
|
crtc->config->dpll_hw_state.dpll_md);
|
|
} else {
|
|
/* The pixel multiplier can only be updated once the
|
|
* DPLL is enabled and the clocks are stable.
|
|
*
|
|
* So write it again.
|
|
*/
|
|
I915_WRITE(reg, dpll);
|
|
}
|
|
|
|
/* We do this three times for luck */
|
|
I915_WRITE(reg, dpll);
|
|
POSTING_READ(reg);
|
|
udelay(150); /* wait for warmup */
|
|
I915_WRITE(reg, dpll);
|
|
POSTING_READ(reg);
|
|
udelay(150); /* wait for warmup */
|
|
I915_WRITE(reg, dpll);
|
|
POSTING_READ(reg);
|
|
udelay(150); /* wait for warmup */
|
|
}
|
|
|
|
/**
|
|
* i9xx_disable_pll - disable a PLL
|
|
* @dev_priv: i915 private structure
|
|
* @pipe: pipe PLL to disable
|
|
*
|
|
* Disable the PLL for @pipe, making sure the pipe is off first.
|
|
*
|
|
* Note! This is for pre-ILK only.
|
|
*/
|
|
static void i9xx_disable_pll(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
enum pipe pipe = crtc->pipe;
|
|
|
|
/* Disable DVO 2x clock on both PLLs if necessary */
|
|
if (IS_I830(dev) &&
|
|
intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO) &&
|
|
!intel_num_dvo_pipes(dev)) {
|
|
I915_WRITE(DPLL(PIPE_B),
|
|
I915_READ(DPLL(PIPE_B)) & ~DPLL_DVO_2X_MODE);
|
|
I915_WRITE(DPLL(PIPE_A),
|
|
I915_READ(DPLL(PIPE_A)) & ~DPLL_DVO_2X_MODE);
|
|
}
|
|
|
|
/* Don't disable pipe or pipe PLLs if needed */
|
|
if ((pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
|
|
(pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
|
|
return;
|
|
|
|
/* Make sure the pipe isn't still relying on us */
|
|
assert_pipe_disabled(dev_priv, pipe);
|
|
|
|
I915_WRITE(DPLL(pipe), DPLL_VGA_MODE_DIS);
|
|
POSTING_READ(DPLL(pipe));
|
|
}
|
|
|
|
static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
|
|
{
|
|
u32 val;
|
|
|
|
/* Make sure the pipe isn't still relying on us */
|
|
assert_pipe_disabled(dev_priv, pipe);
|
|
|
|
/*
|
|
* Leave integrated clock source and reference clock enabled for pipe B.
|
|
* The latter is needed for VGA hotplug / manual detection.
|
|
*/
|
|
val = DPLL_VGA_MODE_DIS;
|
|
if (pipe == PIPE_B)
|
|
val = DPLL_INTEGRATED_CRI_CLK_VLV | DPLL_REF_CLK_ENABLE_VLV;
|
|
I915_WRITE(DPLL(pipe), val);
|
|
POSTING_READ(DPLL(pipe));
|
|
|
|
}
|
|
|
|
static void chv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
|
|
{
|
|
enum dpio_channel port = vlv_pipe_to_channel(pipe);
|
|
u32 val;
|
|
|
|
/* Make sure the pipe isn't still relying on us */
|
|
assert_pipe_disabled(dev_priv, pipe);
|
|
|
|
/* Set PLL en = 0 */
|
|
val = DPLL_SSC_REF_CLK_CHV |
|
|
DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
|
|
if (pipe != PIPE_A)
|
|
val |= DPLL_INTEGRATED_CRI_CLK_VLV;
|
|
I915_WRITE(DPLL(pipe), val);
|
|
POSTING_READ(DPLL(pipe));
|
|
|
|
mutex_lock(&dev_priv->sb_lock);
|
|
|
|
/* Disable 10bit clock to display controller */
|
|
val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
|
|
val &= ~DPIO_DCLKP_EN;
|
|
vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), val);
|
|
|
|
mutex_unlock(&dev_priv->sb_lock);
|
|
}
|
|
|
|
void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
|
|
struct intel_digital_port *dport,
|
|
unsigned int expected_mask)
|
|
{
|
|
u32 port_mask;
|
|
i915_reg_t dpll_reg;
|
|
|
|
switch (dport->port) {
|
|
case PORT_B:
|
|
port_mask = DPLL_PORTB_READY_MASK;
|
|
dpll_reg = DPLL(0);
|
|
break;
|
|
case PORT_C:
|
|
port_mask = DPLL_PORTC_READY_MASK;
|
|
dpll_reg = DPLL(0);
|
|
expected_mask <<= 4;
|
|
break;
|
|
case PORT_D:
|
|
port_mask = DPLL_PORTD_READY_MASK;
|
|
dpll_reg = DPIO_PHY_STATUS;
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
|
|
if (wait_for((I915_READ(dpll_reg) & port_mask) == expected_mask, 1000))
|
|
WARN(1, "timed out waiting for port %c ready: got 0x%x, expected 0x%x\n",
|
|
port_name(dport->port), I915_READ(dpll_reg) & port_mask, expected_mask);
|
|
}
|
|
|
|
static void intel_prepare_shared_dpll(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
|
|
|
|
if (WARN_ON(pll == NULL))
|
|
return;
|
|
|
|
WARN_ON(!pll->config.crtc_mask);
|
|
if (pll->active == 0) {
|
|
DRM_DEBUG_DRIVER("setting up %s\n", pll->name);
|
|
WARN_ON(pll->on);
|
|
assert_shared_dpll_disabled(dev_priv, pll);
|
|
|
|
pll->mode_set(dev_priv, pll);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* intel_enable_shared_dpll - enable PCH PLL
|
|
* @dev_priv: i915 private structure
|
|
* @pipe: pipe PLL to enable
|
|
*
|
|
* The PCH PLL needs to be enabled before the PCH transcoder, since it
|
|
* drives the transcoder clock.
|
|
*/
|
|
static void intel_enable_shared_dpll(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
|
|
|
|
if (WARN_ON(pll == NULL))
|
|
return;
|
|
|
|
if (WARN_ON(pll->config.crtc_mask == 0))
|
|
return;
|
|
|
|
DRM_DEBUG_KMS("enable %s (active %d, on? %d) for crtc %d\n",
|
|
pll->name, pll->active, pll->on,
|
|
crtc->base.base.id);
|
|
|
|
if (pll->active++) {
|
|
WARN_ON(!pll->on);
|
|
assert_shared_dpll_enabled(dev_priv, pll);
|
|
return;
|
|
}
|
|
WARN_ON(pll->on);
|
|
|
|
intel_display_power_get(dev_priv, POWER_DOMAIN_PLLS);
|
|
|
|
DRM_DEBUG_KMS("enabling %s\n", pll->name);
|
|
pll->enable(dev_priv, pll);
|
|
pll->on = true;
|
|
}
|
|
|
|
static void intel_disable_shared_dpll(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
|
|
|
|
/* PCH only available on ILK+ */
|
|
if (INTEL_INFO(dev)->gen < 5)
|
|
return;
|
|
|
|
if (pll == NULL)
|
|
return;
|
|
|
|
if (WARN_ON(!(pll->config.crtc_mask & (1 << drm_crtc_index(&crtc->base)))))
|
|
return;
|
|
|
|
DRM_DEBUG_KMS("disable %s (active %d, on? %d) for crtc %d\n",
|
|
pll->name, pll->active, pll->on,
|
|
crtc->base.base.id);
|
|
|
|
if (WARN_ON(pll->active == 0)) {
|
|
assert_shared_dpll_disabled(dev_priv, pll);
|
|
return;
|
|
}
|
|
|
|
assert_shared_dpll_enabled(dev_priv, pll);
|
|
WARN_ON(!pll->on);
|
|
if (--pll->active)
|
|
return;
|
|
|
|
DRM_DEBUG_KMS("disabling %s\n", pll->name);
|
|
pll->disable(dev_priv, pll);
|
|
pll->on = false;
|
|
|
|
intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS);
|
|
}
|
|
|
|
static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe)
|
|
{
|
|
struct drm_device *dev = dev_priv->dev;
|
|
struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
i915_reg_t reg;
|
|
uint32_t val, pipeconf_val;
|
|
|
|
/* PCH only available on ILK+ */
|
|
BUG_ON(!HAS_PCH_SPLIT(dev));
|
|
|
|
/* Make sure PCH DPLL is enabled */
|
|
assert_shared_dpll_enabled(dev_priv,
|
|
intel_crtc_to_shared_dpll(intel_crtc));
|
|
|
|
/* FDI must be feeding us bits for PCH ports */
|
|
assert_fdi_tx_enabled(dev_priv, pipe);
|
|
assert_fdi_rx_enabled(dev_priv, pipe);
|
|
|
|
if (HAS_PCH_CPT(dev)) {
|
|
/* Workaround: Set the timing override bit before enabling the
|
|
* pch transcoder. */
|
|
reg = TRANS_CHICKEN2(pipe);
|
|
val = I915_READ(reg);
|
|
val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
|
|
I915_WRITE(reg, val);
|
|
}
|
|
|
|
reg = PCH_TRANSCONF(pipe);
|
|
val = I915_READ(reg);
|
|
pipeconf_val = I915_READ(PIPECONF(pipe));
|
|
|
|
if (HAS_PCH_IBX(dev_priv->dev)) {
|
|
/*
|
|
* Make the BPC in transcoder be consistent with
|
|
* that in pipeconf reg. For HDMI we must use 8bpc
|
|
* here for both 8bpc and 12bpc.
|
|
*/
|
|
val &= ~PIPECONF_BPC_MASK;
|
|
if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_HDMI))
|
|
val |= PIPECONF_8BPC;
|
|
else
|
|
val |= pipeconf_val & PIPECONF_BPC_MASK;
|
|
}
|
|
|
|
val &= ~TRANS_INTERLACE_MASK;
|
|
if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK)
|
|
if (HAS_PCH_IBX(dev_priv->dev) &&
|
|
intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_SDVO))
|
|
val |= TRANS_LEGACY_INTERLACED_ILK;
|
|
else
|
|
val |= TRANS_INTERLACED;
|
|
else
|
|
val |= TRANS_PROGRESSIVE;
|
|
|
|
I915_WRITE(reg, val | TRANS_ENABLE);
|
|
if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100))
|
|
DRM_ERROR("failed to enable transcoder %c\n", pipe_name(pipe));
|
|
}
|
|
|
|
static void lpt_enable_pch_transcoder(struct drm_i915_private *dev_priv,
|
|
enum transcoder cpu_transcoder)
|
|
{
|
|
u32 val, pipeconf_val;
|
|
|
|
/* PCH only available on ILK+ */
|
|
BUG_ON(!HAS_PCH_SPLIT(dev_priv->dev));
|
|
|
|
/* FDI must be feeding us bits for PCH ports */
|
|
assert_fdi_tx_enabled(dev_priv, (enum pipe) cpu_transcoder);
|
|
assert_fdi_rx_enabled(dev_priv, TRANSCODER_A);
|
|
|
|
/* Workaround: set timing override bit. */
|
|
val = I915_READ(TRANS_CHICKEN2(PIPE_A));
|
|
val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
|
|
I915_WRITE(TRANS_CHICKEN2(PIPE_A), val);
|
|
|
|
val = TRANS_ENABLE;
|
|
pipeconf_val = I915_READ(PIPECONF(cpu_transcoder));
|
|
|
|
if ((pipeconf_val & PIPECONF_INTERLACE_MASK_HSW) ==
|
|
PIPECONF_INTERLACED_ILK)
|
|
val |= TRANS_INTERLACED;
|
|
else
|
|
val |= TRANS_PROGRESSIVE;
|
|
|
|
I915_WRITE(LPT_TRANSCONF, val);
|
|
if (wait_for(I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE, 100))
|
|
DRM_ERROR("Failed to enable PCH transcoder\n");
|
|
}
|
|
|
|
static void ironlake_disable_pch_transcoder(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe)
|
|
{
|
|
struct drm_device *dev = dev_priv->dev;
|
|
i915_reg_t reg;
|
|
uint32_t val;
|
|
|
|
/* FDI relies on the transcoder */
|
|
assert_fdi_tx_disabled(dev_priv, pipe);
|
|
assert_fdi_rx_disabled(dev_priv, pipe);
|
|
|
|
/* Ports must be off as well */
|
|
assert_pch_ports_disabled(dev_priv, pipe);
|
|
|
|
reg = PCH_TRANSCONF(pipe);
|
|
val = I915_READ(reg);
|
|
val &= ~TRANS_ENABLE;
|
|
I915_WRITE(reg, val);
|
|
/* wait for PCH transcoder off, transcoder state */
|
|
if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50))
|
|
DRM_ERROR("failed to disable transcoder %c\n", pipe_name(pipe));
|
|
|
|
if (HAS_PCH_CPT(dev)) {
|
|
/* Workaround: Clear the timing override chicken bit again. */
|
|
reg = TRANS_CHICKEN2(pipe);
|
|
val = I915_READ(reg);
|
|
val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
|
|
I915_WRITE(reg, val);
|
|
}
|
|
}
|
|
|
|
static void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 val;
|
|
|
|
val = I915_READ(LPT_TRANSCONF);
|
|
val &= ~TRANS_ENABLE;
|
|
I915_WRITE(LPT_TRANSCONF, val);
|
|
/* wait for PCH transcoder off, transcoder state */
|
|
if (wait_for((I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE) == 0, 50))
|
|
DRM_ERROR("Failed to disable PCH transcoder\n");
|
|
|
|
/* Workaround: clear timing override bit. */
|
|
val = I915_READ(TRANS_CHICKEN2(PIPE_A));
|
|
val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
|
|
I915_WRITE(TRANS_CHICKEN2(PIPE_A), val);
|
|
}
|
|
|
|
/**
|
|
* intel_enable_pipe - enable a pipe, asserting requirements
|
|
* @crtc: crtc responsible for the pipe
|
|
*
|
|
* Enable @crtc's pipe, making sure that various hardware specific requirements
|
|
* are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc.
|
|
*/
|
|
static void intel_enable_pipe(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
enum pipe pipe = crtc->pipe;
|
|
enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
|
|
enum pipe pch_transcoder;
|
|
i915_reg_t reg;
|
|
u32 val;
|
|
|
|
DRM_DEBUG_KMS("enabling pipe %c\n", pipe_name(pipe));
|
|
|
|
assert_planes_disabled(dev_priv, pipe);
|
|
assert_cursor_disabled(dev_priv, pipe);
|
|
assert_sprites_disabled(dev_priv, pipe);
|
|
|
|
if (HAS_PCH_LPT(dev_priv->dev))
|
|
pch_transcoder = TRANSCODER_A;
|
|
else
|
|
pch_transcoder = pipe;
|
|
|
|
/*
|
|
* A pipe without a PLL won't actually be able to drive bits from
|
|
* a plane. On ILK+ the pipe PLLs are integrated, so we don't
|
|
* need the check.
|
|
*/
|
|
if (HAS_GMCH_DISPLAY(dev_priv->dev))
|
|
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI))
|
|
assert_dsi_pll_enabled(dev_priv);
|
|
else
|
|
assert_pll_enabled(dev_priv, pipe);
|
|
else {
|
|
if (crtc->config->has_pch_encoder) {
|
|
/* if driving the PCH, we need FDI enabled */
|
|
assert_fdi_rx_pll_enabled(dev_priv, pch_transcoder);
|
|
assert_fdi_tx_pll_enabled(dev_priv,
|
|
(enum pipe) cpu_transcoder);
|
|
}
|
|
/* FIXME: assert CPU port conditions for SNB+ */
|
|
}
|
|
|
|
reg = PIPECONF(cpu_transcoder);
|
|
val = I915_READ(reg);
|
|
if (val & PIPECONF_ENABLE) {
|
|
WARN_ON(!((pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
|
|
(pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE)));
|
|
return;
|
|
}
|
|
|
|
I915_WRITE(reg, val | PIPECONF_ENABLE);
|
|
POSTING_READ(reg);
|
|
}
|
|
|
|
/**
|
|
* intel_disable_pipe - disable a pipe, asserting requirements
|
|
* @crtc: crtc whose pipes is to be disabled
|
|
*
|
|
* Disable the pipe of @crtc, making sure that various hardware
|
|
* specific requirements are met, if applicable, e.g. plane
|
|
* disabled, panel fitter off, etc.
|
|
*
|
|
* Will wait until the pipe has shut down before returning.
|
|
*/
|
|
static void intel_disable_pipe(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
|
|
enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
|
|
enum pipe pipe = crtc->pipe;
|
|
i915_reg_t reg;
|
|
u32 val;
|
|
|
|
DRM_DEBUG_KMS("disabling pipe %c\n", pipe_name(pipe));
|
|
|
|
/*
|
|
* Make sure planes won't keep trying to pump pixels to us,
|
|
* or we might hang the display.
|
|
*/
|
|
assert_planes_disabled(dev_priv, pipe);
|
|
assert_cursor_disabled(dev_priv, pipe);
|
|
assert_sprites_disabled(dev_priv, pipe);
|
|
|
|
reg = PIPECONF(cpu_transcoder);
|
|
val = I915_READ(reg);
|
|
if ((val & PIPECONF_ENABLE) == 0)
|
|
return;
|
|
|
|
/*
|
|
* Double wide has implications for planes
|
|
* so best keep it disabled when not needed.
|
|
*/
|
|
if (crtc->config->double_wide)
|
|
val &= ~PIPECONF_DOUBLE_WIDE;
|
|
|
|
/* Don't disable pipe or pipe PLLs if needed */
|
|
if (!(pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) &&
|
|
!(pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
|
|
val &= ~PIPECONF_ENABLE;
|
|
|
|
I915_WRITE(reg, val);
|
|
if ((val & PIPECONF_ENABLE) == 0)
|
|
intel_wait_for_pipe_off(crtc);
|
|
}
|
|
|
|
static bool need_vtd_wa(struct drm_device *dev)
|
|
{
|
|
#ifdef CONFIG_INTEL_IOMMU
|
|
if (INTEL_INFO(dev)->gen >= 6 && intel_iommu_gfx_mapped)
|
|
return true;
|
|
#endif
|
|
return false;
|
|
}
|
|
|
|
unsigned int
|
|
intel_tile_height(struct drm_device *dev, uint32_t pixel_format,
|
|
uint64_t fb_format_modifier, unsigned int plane)
|
|
{
|
|
unsigned int tile_height;
|
|
uint32_t pixel_bytes;
|
|
|
|
switch (fb_format_modifier) {
|
|
case DRM_FORMAT_MOD_NONE:
|
|
tile_height = 1;
|
|
break;
|
|
case I915_FORMAT_MOD_X_TILED:
|
|
tile_height = IS_GEN2(dev) ? 16 : 8;
|
|
break;
|
|
case I915_FORMAT_MOD_Y_TILED:
|
|
tile_height = 32;
|
|
break;
|
|
case I915_FORMAT_MOD_Yf_TILED:
|
|
pixel_bytes = drm_format_plane_cpp(pixel_format, plane);
|
|
switch (pixel_bytes) {
|
|
default:
|
|
case 1:
|
|
tile_height = 64;
|
|
break;
|
|
case 2:
|
|
case 4:
|
|
tile_height = 32;
|
|
break;
|
|
case 8:
|
|
tile_height = 16;
|
|
break;
|
|
case 16:
|
|
WARN_ONCE(1,
|
|
"128-bit pixels are not supported for display!");
|
|
tile_height = 16;
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
MISSING_CASE(fb_format_modifier);
|
|
tile_height = 1;
|
|
break;
|
|
}
|
|
|
|
return tile_height;
|
|
}
|
|
|
|
unsigned int
|
|
intel_fb_align_height(struct drm_device *dev, unsigned int height,
|
|
uint32_t pixel_format, uint64_t fb_format_modifier)
|
|
{
|
|
return ALIGN(height, intel_tile_height(dev, pixel_format,
|
|
fb_format_modifier, 0));
|
|
}
|
|
|
|
static int
|
|
intel_fill_fb_ggtt_view(struct i915_ggtt_view *view, struct drm_framebuffer *fb,
|
|
const struct drm_plane_state *plane_state)
|
|
{
|
|
struct intel_rotation_info *info = &view->rotation_info;
|
|
unsigned int tile_height, tile_pitch;
|
|
|
|
*view = i915_ggtt_view_normal;
|
|
|
|
if (!plane_state)
|
|
return 0;
|
|
|
|
if (!intel_rotation_90_or_270(plane_state->rotation))
|
|
return 0;
|
|
|
|
*view = i915_ggtt_view_rotated;
|
|
|
|
info->height = fb->height;
|
|
info->pixel_format = fb->pixel_format;
|
|
info->pitch = fb->pitches[0];
|
|
info->uv_offset = fb->offsets[1];
|
|
info->fb_modifier = fb->modifier[0];
|
|
|
|
tile_height = intel_tile_height(fb->dev, fb->pixel_format,
|
|
fb->modifier[0], 0);
|
|
tile_pitch = PAGE_SIZE / tile_height;
|
|
info->width_pages = DIV_ROUND_UP(fb->pitches[0], tile_pitch);
|
|
info->height_pages = DIV_ROUND_UP(fb->height, tile_height);
|
|
info->size = info->width_pages * info->height_pages * PAGE_SIZE;
|
|
|
|
if (info->pixel_format == DRM_FORMAT_NV12) {
|
|
tile_height = intel_tile_height(fb->dev, fb->pixel_format,
|
|
fb->modifier[0], 1);
|
|
tile_pitch = PAGE_SIZE / tile_height;
|
|
info->width_pages_uv = DIV_ROUND_UP(fb->pitches[0], tile_pitch);
|
|
info->height_pages_uv = DIV_ROUND_UP(fb->height / 2,
|
|
tile_height);
|
|
info->size_uv = info->width_pages_uv * info->height_pages_uv *
|
|
PAGE_SIZE;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int intel_linear_alignment(struct drm_i915_private *dev_priv)
|
|
{
|
|
if (INTEL_INFO(dev_priv)->gen >= 9)
|
|
return 256 * 1024;
|
|
else if (IS_BROADWATER(dev_priv) || IS_CRESTLINE(dev_priv) ||
|
|
IS_VALLEYVIEW(dev_priv))
|
|
return 128 * 1024;
|
|
else if (INTEL_INFO(dev_priv)->gen >= 4)
|
|
return 4 * 1024;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
intel_pin_and_fence_fb_obj(struct drm_plane *plane,
|
|
struct drm_framebuffer *fb,
|
|
const struct drm_plane_state *plane_state)
|
|
{
|
|
struct drm_device *dev = fb->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_i915_gem_object *obj = intel_fb_obj(fb);
|
|
struct i915_ggtt_view view;
|
|
u32 alignment;
|
|
int ret;
|
|
|
|
WARN_ON(!mutex_is_locked(&dev->struct_mutex));
|
|
|
|
switch (fb->modifier[0]) {
|
|
case DRM_FORMAT_MOD_NONE:
|
|
alignment = intel_linear_alignment(dev_priv);
|
|
break;
|
|
case I915_FORMAT_MOD_X_TILED:
|
|
if (INTEL_INFO(dev)->gen >= 9)
|
|
alignment = 256 * 1024;
|
|
else {
|
|
/* pin() will align the object as required by fence */
|
|
alignment = 0;
|
|
}
|
|
break;
|
|
case I915_FORMAT_MOD_Y_TILED:
|
|
case I915_FORMAT_MOD_Yf_TILED:
|
|
if (WARN_ONCE(INTEL_INFO(dev)->gen < 9,
|
|
"Y tiling bo slipped through, driver bug!\n"))
|
|
return -EINVAL;
|
|
alignment = 1 * 1024 * 1024;
|
|
break;
|
|
default:
|
|
MISSING_CASE(fb->modifier[0]);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = intel_fill_fb_ggtt_view(&view, fb, plane_state);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Note that the w/a also requires 64 PTE of padding following the
|
|
* bo. We currently fill all unused PTE with the shadow page and so
|
|
* we should always have valid PTE following the scanout preventing
|
|
* the VT-d warning.
|
|
*/
|
|
if (need_vtd_wa(dev) && alignment < 256 * 1024)
|
|
alignment = 256 * 1024;
|
|
|
|
/*
|
|
* Global gtt pte registers are special registers which actually forward
|
|
* writes to a chunk of system memory. Which means that there is no risk
|
|
* that the register values disappear as soon as we call
|
|
* intel_runtime_pm_put(), so it is correct to wrap only the
|
|
* pin/unpin/fence and not more.
|
|
*/
|
|
intel_runtime_pm_get(dev_priv);
|
|
|
|
ret = i915_gem_object_pin_to_display_plane(obj, alignment,
|
|
&view);
|
|
if (ret)
|
|
goto err_pm;
|
|
|
|
/* Install a fence for tiled scan-out. Pre-i965 always needs a
|
|
* fence, whereas 965+ only requires a fence if using
|
|
* framebuffer compression. For simplicity, we always install
|
|
* a fence as the cost is not that onerous.
|
|
*/
|
|
ret = i915_gem_object_get_fence(obj);
|
|
if (ret == -EDEADLK) {
|
|
/*
|
|
* -EDEADLK means there are no free fences
|
|
* no pending flips.
|
|
*
|
|
* This is propagated to atomic, but it uses
|
|
* -EDEADLK to force a locking recovery, so
|
|
* change the returned error to -EBUSY.
|
|
*/
|
|
ret = -EBUSY;
|
|
goto err_unpin;
|
|
} else if (ret)
|
|
goto err_unpin;
|
|
|
|
i915_gem_object_pin_fence(obj);
|
|
|
|
intel_runtime_pm_put(dev_priv);
|
|
return 0;
|
|
|
|
err_unpin:
|
|
i915_gem_object_unpin_from_display_plane(obj, &view);
|
|
err_pm:
|
|
intel_runtime_pm_put(dev_priv);
|
|
return ret;
|
|
}
|
|
|
|
static void intel_unpin_fb_obj(struct drm_framebuffer *fb,
|
|
const struct drm_plane_state *plane_state)
|
|
{
|
|
struct drm_i915_gem_object *obj = intel_fb_obj(fb);
|
|
struct i915_ggtt_view view;
|
|
int ret;
|
|
|
|
WARN_ON(!mutex_is_locked(&obj->base.dev->struct_mutex));
|
|
|
|
ret = intel_fill_fb_ggtt_view(&view, fb, plane_state);
|
|
WARN_ONCE(ret, "Couldn't get view from plane state!");
|
|
|
|
i915_gem_object_unpin_fence(obj);
|
|
i915_gem_object_unpin_from_display_plane(obj, &view);
|
|
}
|
|
|
|
/* Computes the linear offset to the base tile and adjusts x, y. bytes per pixel
|
|
* is assumed to be a power-of-two. */
|
|
unsigned long intel_gen4_compute_page_offset(struct drm_i915_private *dev_priv,
|
|
int *x, int *y,
|
|
unsigned int tiling_mode,
|
|
unsigned int cpp,
|
|
unsigned int pitch)
|
|
{
|
|
if (tiling_mode != I915_TILING_NONE) {
|
|
unsigned int tile_rows, tiles;
|
|
|
|
tile_rows = *y / 8;
|
|
*y %= 8;
|
|
|
|
tiles = *x / (512/cpp);
|
|
*x %= 512/cpp;
|
|
|
|
return tile_rows * pitch * 8 + tiles * 4096;
|
|
} else {
|
|
unsigned int alignment = intel_linear_alignment(dev_priv) - 1;
|
|
unsigned int offset;
|
|
|
|
offset = *y * pitch + *x * cpp;
|
|
*y = (offset & alignment) / pitch;
|
|
*x = ((offset & alignment) - *y * pitch) / cpp;
|
|
return offset & ~alignment;
|
|
}
|
|
}
|
|
|
|
static int i9xx_format_to_fourcc(int format)
|
|
{
|
|
switch (format) {
|
|
case DISPPLANE_8BPP:
|
|
return DRM_FORMAT_C8;
|
|
case DISPPLANE_BGRX555:
|
|
return DRM_FORMAT_XRGB1555;
|
|
case DISPPLANE_BGRX565:
|
|
return DRM_FORMAT_RGB565;
|
|
default:
|
|
case DISPPLANE_BGRX888:
|
|
return DRM_FORMAT_XRGB8888;
|
|
case DISPPLANE_RGBX888:
|
|
return DRM_FORMAT_XBGR8888;
|
|
case DISPPLANE_BGRX101010:
|
|
return DRM_FORMAT_XRGB2101010;
|
|
case DISPPLANE_RGBX101010:
|
|
return DRM_FORMAT_XBGR2101010;
|
|
}
|
|
}
|
|
|
|
static int skl_format_to_fourcc(int format, bool rgb_order, bool alpha)
|
|
{
|
|
switch (format) {
|
|
case PLANE_CTL_FORMAT_RGB_565:
|
|
return DRM_FORMAT_RGB565;
|
|
default:
|
|
case PLANE_CTL_FORMAT_XRGB_8888:
|
|
if (rgb_order) {
|
|
if (alpha)
|
|
return DRM_FORMAT_ABGR8888;
|
|
else
|
|
return DRM_FORMAT_XBGR8888;
|
|
} else {
|
|
if (alpha)
|
|
return DRM_FORMAT_ARGB8888;
|
|
else
|
|
return DRM_FORMAT_XRGB8888;
|
|
}
|
|
case PLANE_CTL_FORMAT_XRGB_2101010:
|
|
if (rgb_order)
|
|
return DRM_FORMAT_XBGR2101010;
|
|
else
|
|
return DRM_FORMAT_XRGB2101010;
|
|
}
|
|
}
|
|
|
|
static bool
|
|
intel_alloc_initial_plane_obj(struct intel_crtc *crtc,
|
|
struct intel_initial_plane_config *plane_config)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct drm_i915_gem_object *obj = NULL;
|
|
struct drm_mode_fb_cmd2 mode_cmd = { 0 };
|
|
struct drm_framebuffer *fb = &plane_config->fb->base;
|
|
u32 base_aligned = round_down(plane_config->base, PAGE_SIZE);
|
|
u32 size_aligned = round_up(plane_config->base + plane_config->size,
|
|
PAGE_SIZE);
|
|
|
|
size_aligned -= base_aligned;
|
|
|
|
if (plane_config->size == 0)
|
|
return false;
|
|
|
|
/* If the FB is too big, just don't use it since fbdev is not very
|
|
* important and we should probably use that space with FBC or other
|
|
* features. */
|
|
if (size_aligned * 2 > dev_priv->gtt.stolen_usable_size)
|
|
return false;
|
|
|
|
obj = i915_gem_object_create_stolen_for_preallocated(dev,
|
|
base_aligned,
|
|
base_aligned,
|
|
size_aligned);
|
|
if (!obj)
|
|
return false;
|
|
|
|
obj->tiling_mode = plane_config->tiling;
|
|
if (obj->tiling_mode == I915_TILING_X)
|
|
obj->stride = fb->pitches[0];
|
|
|
|
mode_cmd.pixel_format = fb->pixel_format;
|
|
mode_cmd.width = fb->width;
|
|
mode_cmd.height = fb->height;
|
|
mode_cmd.pitches[0] = fb->pitches[0];
|
|
mode_cmd.modifier[0] = fb->modifier[0];
|
|
mode_cmd.flags = DRM_MODE_FB_MODIFIERS;
|
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
if (intel_framebuffer_init(dev, to_intel_framebuffer(fb),
|
|
&mode_cmd, obj)) {
|
|
DRM_DEBUG_KMS("intel fb init failed\n");
|
|
goto out_unref_obj;
|
|
}
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
DRM_DEBUG_KMS("initial plane fb obj %p\n", obj);
|
|
return true;
|
|
|
|
out_unref_obj:
|
|
drm_gem_object_unreference(&obj->base);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
return false;
|
|
}
|
|
|
|
/* Update plane->state->fb to match plane->fb after driver-internal updates */
|
|
static void
|
|
update_state_fb(struct drm_plane *plane)
|
|
{
|
|
if (plane->fb == plane->state->fb)
|
|
return;
|
|
|
|
if (plane->state->fb)
|
|
drm_framebuffer_unreference(plane->state->fb);
|
|
plane->state->fb = plane->fb;
|
|
if (plane->state->fb)
|
|
drm_framebuffer_reference(plane->state->fb);
|
|
}
|
|
|
|
static void
|
|
intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
|
|
struct intel_initial_plane_config *plane_config)
|
|
{
|
|
struct drm_device *dev = intel_crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_crtc *c;
|
|
struct intel_crtc *i;
|
|
struct drm_i915_gem_object *obj;
|
|
struct drm_plane *primary = intel_crtc->base.primary;
|
|
struct drm_plane_state *plane_state = primary->state;
|
|
struct drm_framebuffer *fb;
|
|
|
|
if (!plane_config->fb)
|
|
return;
|
|
|
|
if (intel_alloc_initial_plane_obj(intel_crtc, plane_config)) {
|
|
fb = &plane_config->fb->base;
|
|
goto valid_fb;
|
|
}
|
|
|
|
kfree(plane_config->fb);
|
|
|
|
/*
|
|
* Failed to alloc the obj, check to see if we should share
|
|
* an fb with another CRTC instead
|
|
*/
|
|
for_each_crtc(dev, c) {
|
|
i = to_intel_crtc(c);
|
|
|
|
if (c == &intel_crtc->base)
|
|
continue;
|
|
|
|
if (!i->active)
|
|
continue;
|
|
|
|
fb = c->primary->fb;
|
|
if (!fb)
|
|
continue;
|
|
|
|
obj = intel_fb_obj(fb);
|
|
if (i915_gem_obj_ggtt_offset(obj) == plane_config->base) {
|
|
drm_framebuffer_reference(fb);
|
|
goto valid_fb;
|
|
}
|
|
}
|
|
|
|
return;
|
|
|
|
valid_fb:
|
|
plane_state->src_x = plane_state->src_y = 0;
|
|
plane_state->src_w = fb->width << 16;
|
|
plane_state->src_h = fb->height << 16;
|
|
|
|
plane_state->crtc_x = plane_state->src_y = 0;
|
|
plane_state->crtc_w = fb->width;
|
|
plane_state->crtc_h = fb->height;
|
|
|
|
obj = intel_fb_obj(fb);
|
|
if (obj->tiling_mode != I915_TILING_NONE)
|
|
dev_priv->preserve_bios_swizzle = true;
|
|
|
|
drm_framebuffer_reference(fb);
|
|
primary->fb = primary->state->fb = fb;
|
|
primary->crtc = primary->state->crtc = &intel_crtc->base;
|
|
intel_crtc->base.state->plane_mask |= (1 << drm_plane_index(primary));
|
|
obj->frontbuffer_bits |= to_intel_plane(primary)->frontbuffer_bit;
|
|
}
|
|
|
|
static void i9xx_update_primary_plane(struct drm_crtc *crtc,
|
|
struct drm_framebuffer *fb,
|
|
int x, int y)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct drm_plane *primary = crtc->primary;
|
|
bool visible = to_intel_plane_state(primary->state)->visible;
|
|
struct drm_i915_gem_object *obj;
|
|
int plane = intel_crtc->plane;
|
|
unsigned long linear_offset;
|
|
u32 dspcntr;
|
|
i915_reg_t reg = DSPCNTR(plane);
|
|
int pixel_size;
|
|
|
|
if (!visible || !fb) {
|
|
I915_WRITE(reg, 0);
|
|
if (INTEL_INFO(dev)->gen >= 4)
|
|
I915_WRITE(DSPSURF(plane), 0);
|
|
else
|
|
I915_WRITE(DSPADDR(plane), 0);
|
|
POSTING_READ(reg);
|
|
return;
|
|
}
|
|
|
|
obj = intel_fb_obj(fb);
|
|
if (WARN_ON(obj == NULL))
|
|
return;
|
|
|
|
pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
|
|
|
|
dspcntr = DISPPLANE_GAMMA_ENABLE;
|
|
|
|
dspcntr |= DISPLAY_PLANE_ENABLE;
|
|
|
|
if (INTEL_INFO(dev)->gen < 4) {
|
|
if (intel_crtc->pipe == PIPE_B)
|
|
dspcntr |= DISPPLANE_SEL_PIPE_B;
|
|
|
|
/* pipesrc and dspsize control the size that is scaled from,
|
|
* which should always be the user's requested size.
|
|
*/
|
|
I915_WRITE(DSPSIZE(plane),
|
|
((intel_crtc->config->pipe_src_h - 1) << 16) |
|
|
(intel_crtc->config->pipe_src_w - 1));
|
|
I915_WRITE(DSPPOS(plane), 0);
|
|
} else if (IS_CHERRYVIEW(dev) && plane == PLANE_B) {
|
|
I915_WRITE(PRIMSIZE(plane),
|
|
((intel_crtc->config->pipe_src_h - 1) << 16) |
|
|
(intel_crtc->config->pipe_src_w - 1));
|
|
I915_WRITE(PRIMPOS(plane), 0);
|
|
I915_WRITE(PRIMCNSTALPHA(plane), 0);
|
|
}
|
|
|
|
switch (fb->pixel_format) {
|
|
case DRM_FORMAT_C8:
|
|
dspcntr |= DISPPLANE_8BPP;
|
|
break;
|
|
case DRM_FORMAT_XRGB1555:
|
|
dspcntr |= DISPPLANE_BGRX555;
|
|
break;
|
|
case DRM_FORMAT_RGB565:
|
|
dspcntr |= DISPPLANE_BGRX565;
|
|
break;
|
|
case DRM_FORMAT_XRGB8888:
|
|
dspcntr |= DISPPLANE_BGRX888;
|
|
break;
|
|
case DRM_FORMAT_XBGR8888:
|
|
dspcntr |= DISPPLANE_RGBX888;
|
|
break;
|
|
case DRM_FORMAT_XRGB2101010:
|
|
dspcntr |= DISPPLANE_BGRX101010;
|
|
break;
|
|
case DRM_FORMAT_XBGR2101010:
|
|
dspcntr |= DISPPLANE_RGBX101010;
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
|
|
if (INTEL_INFO(dev)->gen >= 4 &&
|
|
obj->tiling_mode != I915_TILING_NONE)
|
|
dspcntr |= DISPPLANE_TILED;
|
|
|
|
if (IS_G4X(dev))
|
|
dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
|
|
|
|
linear_offset = y * fb->pitches[0] + x * pixel_size;
|
|
|
|
if (INTEL_INFO(dev)->gen >= 4) {
|
|
intel_crtc->dspaddr_offset =
|
|
intel_gen4_compute_page_offset(dev_priv,
|
|
&x, &y, obj->tiling_mode,
|
|
pixel_size,
|
|
fb->pitches[0]);
|
|
linear_offset -= intel_crtc->dspaddr_offset;
|
|
} else {
|
|
intel_crtc->dspaddr_offset = linear_offset;
|
|
}
|
|
|
|
if (crtc->primary->state->rotation == BIT(DRM_ROTATE_180)) {
|
|
dspcntr |= DISPPLANE_ROTATE_180;
|
|
|
|
x += (intel_crtc->config->pipe_src_w - 1);
|
|
y += (intel_crtc->config->pipe_src_h - 1);
|
|
|
|
/* Finding the last pixel of the last line of the display
|
|
data and adding to linear_offset*/
|
|
linear_offset +=
|
|
(intel_crtc->config->pipe_src_h - 1) * fb->pitches[0] +
|
|
(intel_crtc->config->pipe_src_w - 1) * pixel_size;
|
|
}
|
|
|
|
intel_crtc->adjusted_x = x;
|
|
intel_crtc->adjusted_y = y;
|
|
|
|
I915_WRITE(reg, dspcntr);
|
|
|
|
I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
|
|
if (INTEL_INFO(dev)->gen >= 4) {
|
|
I915_WRITE(DSPSURF(plane),
|
|
i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
|
|
I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
|
|
I915_WRITE(DSPLINOFF(plane), linear_offset);
|
|
} else
|
|
I915_WRITE(DSPADDR(plane), i915_gem_obj_ggtt_offset(obj) + linear_offset);
|
|
POSTING_READ(reg);
|
|
}
|
|
|
|
static void ironlake_update_primary_plane(struct drm_crtc *crtc,
|
|
struct drm_framebuffer *fb,
|
|
int x, int y)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct drm_plane *primary = crtc->primary;
|
|
bool visible = to_intel_plane_state(primary->state)->visible;
|
|
struct drm_i915_gem_object *obj;
|
|
int plane = intel_crtc->plane;
|
|
unsigned long linear_offset;
|
|
u32 dspcntr;
|
|
i915_reg_t reg = DSPCNTR(plane);
|
|
int pixel_size;
|
|
|
|
if (!visible || !fb) {
|
|
I915_WRITE(reg, 0);
|
|
I915_WRITE(DSPSURF(plane), 0);
|
|
POSTING_READ(reg);
|
|
return;
|
|
}
|
|
|
|
obj = intel_fb_obj(fb);
|
|
if (WARN_ON(obj == NULL))
|
|
return;
|
|
|
|
pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
|
|
|
|
dspcntr = DISPPLANE_GAMMA_ENABLE;
|
|
|
|
dspcntr |= DISPLAY_PLANE_ENABLE;
|
|
|
|
if (IS_HASWELL(dev) || IS_BROADWELL(dev))
|
|
dspcntr |= DISPPLANE_PIPE_CSC_ENABLE;
|
|
|
|
switch (fb->pixel_format) {
|
|
case DRM_FORMAT_C8:
|
|
dspcntr |= DISPPLANE_8BPP;
|
|
break;
|
|
case DRM_FORMAT_RGB565:
|
|
dspcntr |= DISPPLANE_BGRX565;
|
|
break;
|
|
case DRM_FORMAT_XRGB8888:
|
|
dspcntr |= DISPPLANE_BGRX888;
|
|
break;
|
|
case DRM_FORMAT_XBGR8888:
|
|
dspcntr |= DISPPLANE_RGBX888;
|
|
break;
|
|
case DRM_FORMAT_XRGB2101010:
|
|
dspcntr |= DISPPLANE_BGRX101010;
|
|
break;
|
|
case DRM_FORMAT_XBGR2101010:
|
|
dspcntr |= DISPPLANE_RGBX101010;
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
|
|
if (obj->tiling_mode != I915_TILING_NONE)
|
|
dspcntr |= DISPPLANE_TILED;
|
|
|
|
if (!IS_HASWELL(dev) && !IS_BROADWELL(dev))
|
|
dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
|
|
|
|
linear_offset = y * fb->pitches[0] + x * pixel_size;
|
|
intel_crtc->dspaddr_offset =
|
|
intel_gen4_compute_page_offset(dev_priv,
|
|
&x, &y, obj->tiling_mode,
|
|
pixel_size,
|
|
fb->pitches[0]);
|
|
linear_offset -= intel_crtc->dspaddr_offset;
|
|
if (crtc->primary->state->rotation == BIT(DRM_ROTATE_180)) {
|
|
dspcntr |= DISPPLANE_ROTATE_180;
|
|
|
|
if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) {
|
|
x += (intel_crtc->config->pipe_src_w - 1);
|
|
y += (intel_crtc->config->pipe_src_h - 1);
|
|
|
|
/* Finding the last pixel of the last line of the display
|
|
data and adding to linear_offset*/
|
|
linear_offset +=
|
|
(intel_crtc->config->pipe_src_h - 1) * fb->pitches[0] +
|
|
(intel_crtc->config->pipe_src_w - 1) * pixel_size;
|
|
}
|
|
}
|
|
|
|
intel_crtc->adjusted_x = x;
|
|
intel_crtc->adjusted_y = y;
|
|
|
|
I915_WRITE(reg, dspcntr);
|
|
|
|
I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
|
|
I915_WRITE(DSPSURF(plane),
|
|
i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
|
|
if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
|
|
I915_WRITE(DSPOFFSET(plane), (y << 16) | x);
|
|
} else {
|
|
I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
|
|
I915_WRITE(DSPLINOFF(plane), linear_offset);
|
|
}
|
|
POSTING_READ(reg);
|
|
}
|
|
|
|
u32 intel_fb_stride_alignment(struct drm_device *dev, uint64_t fb_modifier,
|
|
uint32_t pixel_format)
|
|
{
|
|
u32 bits_per_pixel = drm_format_plane_cpp(pixel_format, 0) * 8;
|
|
|
|
/*
|
|
* The stride is either expressed as a multiple of 64 bytes
|
|
* chunks for linear buffers or in number of tiles for tiled
|
|
* buffers.
|
|
*/
|
|
switch (fb_modifier) {
|
|
case DRM_FORMAT_MOD_NONE:
|
|
return 64;
|
|
case I915_FORMAT_MOD_X_TILED:
|
|
if (INTEL_INFO(dev)->gen == 2)
|
|
return 128;
|
|
return 512;
|
|
case I915_FORMAT_MOD_Y_TILED:
|
|
/* No need to check for old gens and Y tiling since this is
|
|
* about the display engine and those will be blocked before
|
|
* we get here.
|
|
*/
|
|
return 128;
|
|
case I915_FORMAT_MOD_Yf_TILED:
|
|
if (bits_per_pixel == 8)
|
|
return 64;
|
|
else
|
|
return 128;
|
|
default:
|
|
MISSING_CASE(fb_modifier);
|
|
return 64;
|
|
}
|
|
}
|
|
|
|
u32 intel_plane_obj_offset(struct intel_plane *intel_plane,
|
|
struct drm_i915_gem_object *obj,
|
|
unsigned int plane)
|
|
{
|
|
const struct i915_ggtt_view *view = &i915_ggtt_view_normal;
|
|
struct i915_vma *vma;
|
|
u64 offset;
|
|
|
|
if (intel_rotation_90_or_270(intel_plane->base.state->rotation))
|
|
view = &i915_ggtt_view_rotated;
|
|
|
|
vma = i915_gem_obj_to_ggtt_view(obj, view);
|
|
if (WARN(!vma, "ggtt vma for display object not found! (view=%u)\n",
|
|
view->type))
|
|
return -1;
|
|
|
|
offset = vma->node.start;
|
|
|
|
if (plane == 1) {
|
|
offset += vma->ggtt_view.rotation_info.uv_start_page *
|
|
PAGE_SIZE;
|
|
}
|
|
|
|
WARN_ON(upper_32_bits(offset));
|
|
|
|
return lower_32_bits(offset);
|
|
}
|
|
|
|
static void skl_detach_scaler(struct intel_crtc *intel_crtc, int id)
|
|
{
|
|
struct drm_device *dev = intel_crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
I915_WRITE(SKL_PS_CTRL(intel_crtc->pipe, id), 0);
|
|
I915_WRITE(SKL_PS_WIN_POS(intel_crtc->pipe, id), 0);
|
|
I915_WRITE(SKL_PS_WIN_SZ(intel_crtc->pipe, id), 0);
|
|
}
|
|
|
|
/*
|
|
* This function detaches (aka. unbinds) unused scalers in hardware
|
|
*/
|
|
static void skl_detach_scalers(struct intel_crtc *intel_crtc)
|
|
{
|
|
struct intel_crtc_scaler_state *scaler_state;
|
|
int i;
|
|
|
|
scaler_state = &intel_crtc->config->scaler_state;
|
|
|
|
/* loop through and disable scalers that aren't in use */
|
|
for (i = 0; i < intel_crtc->num_scalers; i++) {
|
|
if (!scaler_state->scalers[i].in_use)
|
|
skl_detach_scaler(intel_crtc, i);
|
|
}
|
|
}
|
|
|
|
u32 skl_plane_ctl_format(uint32_t pixel_format)
|
|
{
|
|
switch (pixel_format) {
|
|
case DRM_FORMAT_C8:
|
|
return PLANE_CTL_FORMAT_INDEXED;
|
|
case DRM_FORMAT_RGB565:
|
|
return PLANE_CTL_FORMAT_RGB_565;
|
|
case DRM_FORMAT_XBGR8888:
|
|
return PLANE_CTL_FORMAT_XRGB_8888 | PLANE_CTL_ORDER_RGBX;
|
|
case DRM_FORMAT_XRGB8888:
|
|
return PLANE_CTL_FORMAT_XRGB_8888;
|
|
/*
|
|
* XXX: For ARBG/ABGR formats we default to expecting scanout buffers
|
|
* to be already pre-multiplied. We need to add a knob (or a different
|
|
* DRM_FORMAT) for user-space to configure that.
|
|
*/
|
|
case DRM_FORMAT_ABGR8888:
|
|
return PLANE_CTL_FORMAT_XRGB_8888 | PLANE_CTL_ORDER_RGBX |
|
|
PLANE_CTL_ALPHA_SW_PREMULTIPLY;
|
|
case DRM_FORMAT_ARGB8888:
|
|
return PLANE_CTL_FORMAT_XRGB_8888 |
|
|
PLANE_CTL_ALPHA_SW_PREMULTIPLY;
|
|
case DRM_FORMAT_XRGB2101010:
|
|
return PLANE_CTL_FORMAT_XRGB_2101010;
|
|
case DRM_FORMAT_XBGR2101010:
|
|
return PLANE_CTL_ORDER_RGBX | PLANE_CTL_FORMAT_XRGB_2101010;
|
|
case DRM_FORMAT_YUYV:
|
|
return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YUYV;
|
|
case DRM_FORMAT_YVYU:
|
|
return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YVYU;
|
|
case DRM_FORMAT_UYVY:
|
|
return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_UYVY;
|
|
case DRM_FORMAT_VYUY:
|
|
return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_VYUY;
|
|
default:
|
|
MISSING_CASE(pixel_format);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
u32 skl_plane_ctl_tiling(uint64_t fb_modifier)
|
|
{
|
|
switch (fb_modifier) {
|
|
case DRM_FORMAT_MOD_NONE:
|
|
break;
|
|
case I915_FORMAT_MOD_X_TILED:
|
|
return PLANE_CTL_TILED_X;
|
|
case I915_FORMAT_MOD_Y_TILED:
|
|
return PLANE_CTL_TILED_Y;
|
|
case I915_FORMAT_MOD_Yf_TILED:
|
|
return PLANE_CTL_TILED_YF;
|
|
default:
|
|
MISSING_CASE(fb_modifier);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
u32 skl_plane_ctl_rotation(unsigned int rotation)
|
|
{
|
|
switch (rotation) {
|
|
case BIT(DRM_ROTATE_0):
|
|
break;
|
|
/*
|
|
* DRM_ROTATE_ is counter clockwise to stay compatible with Xrandr
|
|
* while i915 HW rotation is clockwise, thats why this swapping.
|
|
*/
|
|
case BIT(DRM_ROTATE_90):
|
|
return PLANE_CTL_ROTATE_270;
|
|
case BIT(DRM_ROTATE_180):
|
|
return PLANE_CTL_ROTATE_180;
|
|
case BIT(DRM_ROTATE_270):
|
|
return PLANE_CTL_ROTATE_90;
|
|
default:
|
|
MISSING_CASE(rotation);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void skylake_update_primary_plane(struct drm_crtc *crtc,
|
|
struct drm_framebuffer *fb,
|
|
int x, int y)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct drm_plane *plane = crtc->primary;
|
|
bool visible = to_intel_plane_state(plane->state)->visible;
|
|
struct drm_i915_gem_object *obj;
|
|
int pipe = intel_crtc->pipe;
|
|
u32 plane_ctl, stride_div, stride;
|
|
u32 tile_height, plane_offset, plane_size;
|
|
unsigned int rotation;
|
|
int x_offset, y_offset;
|
|
u32 surf_addr;
|
|
struct intel_crtc_state *crtc_state = intel_crtc->config;
|
|
struct intel_plane_state *plane_state;
|
|
int src_x = 0, src_y = 0, src_w = 0, src_h = 0;
|
|
int dst_x = 0, dst_y = 0, dst_w = 0, dst_h = 0;
|
|
int scaler_id = -1;
|
|
|
|
plane_state = to_intel_plane_state(plane->state);
|
|
|
|
if (!visible || !fb) {
|
|
I915_WRITE(PLANE_CTL(pipe, 0), 0);
|
|
I915_WRITE(PLANE_SURF(pipe, 0), 0);
|
|
POSTING_READ(PLANE_CTL(pipe, 0));
|
|
return;
|
|
}
|
|
|
|
plane_ctl = PLANE_CTL_ENABLE |
|
|
PLANE_CTL_PIPE_GAMMA_ENABLE |
|
|
PLANE_CTL_PIPE_CSC_ENABLE;
|
|
|
|
plane_ctl |= skl_plane_ctl_format(fb->pixel_format);
|
|
plane_ctl |= skl_plane_ctl_tiling(fb->modifier[0]);
|
|
plane_ctl |= PLANE_CTL_PLANE_GAMMA_DISABLE;
|
|
|
|
rotation = plane->state->rotation;
|
|
plane_ctl |= skl_plane_ctl_rotation(rotation);
|
|
|
|
obj = intel_fb_obj(fb);
|
|
stride_div = intel_fb_stride_alignment(dev, fb->modifier[0],
|
|
fb->pixel_format);
|
|
surf_addr = intel_plane_obj_offset(to_intel_plane(plane), obj, 0);
|
|
|
|
WARN_ON(drm_rect_width(&plane_state->src) == 0);
|
|
|
|
scaler_id = plane_state->scaler_id;
|
|
src_x = plane_state->src.x1 >> 16;
|
|
src_y = plane_state->src.y1 >> 16;
|
|
src_w = drm_rect_width(&plane_state->src) >> 16;
|
|
src_h = drm_rect_height(&plane_state->src) >> 16;
|
|
dst_x = plane_state->dst.x1;
|
|
dst_y = plane_state->dst.y1;
|
|
dst_w = drm_rect_width(&plane_state->dst);
|
|
dst_h = drm_rect_height(&plane_state->dst);
|
|
|
|
WARN_ON(x != src_x || y != src_y);
|
|
|
|
if (intel_rotation_90_or_270(rotation)) {
|
|
/* stride = Surface height in tiles */
|
|
tile_height = intel_tile_height(dev, fb->pixel_format,
|
|
fb->modifier[0], 0);
|
|
stride = DIV_ROUND_UP(fb->height, tile_height);
|
|
x_offset = stride * tile_height - y - src_h;
|
|
y_offset = x;
|
|
plane_size = (src_w - 1) << 16 | (src_h - 1);
|
|
} else {
|
|
stride = fb->pitches[0] / stride_div;
|
|
x_offset = x;
|
|
y_offset = y;
|
|
plane_size = (src_h - 1) << 16 | (src_w - 1);
|
|
}
|
|
plane_offset = y_offset << 16 | x_offset;
|
|
|
|
intel_crtc->adjusted_x = x_offset;
|
|
intel_crtc->adjusted_y = y_offset;
|
|
|
|
I915_WRITE(PLANE_CTL(pipe, 0), plane_ctl);
|
|
I915_WRITE(PLANE_OFFSET(pipe, 0), plane_offset);
|
|
I915_WRITE(PLANE_SIZE(pipe, 0), plane_size);
|
|
I915_WRITE(PLANE_STRIDE(pipe, 0), stride);
|
|
|
|
if (scaler_id >= 0) {
|
|
uint32_t ps_ctrl = 0;
|
|
|
|
WARN_ON(!dst_w || !dst_h);
|
|
ps_ctrl = PS_SCALER_EN | PS_PLANE_SEL(0) |
|
|
crtc_state->scaler_state.scalers[scaler_id].mode;
|
|
I915_WRITE(SKL_PS_CTRL(pipe, scaler_id), ps_ctrl);
|
|
I915_WRITE(SKL_PS_PWR_GATE(pipe, scaler_id), 0);
|
|
I915_WRITE(SKL_PS_WIN_POS(pipe, scaler_id), (dst_x << 16) | dst_y);
|
|
I915_WRITE(SKL_PS_WIN_SZ(pipe, scaler_id), (dst_w << 16) | dst_h);
|
|
I915_WRITE(PLANE_POS(pipe, 0), 0);
|
|
} else {
|
|
I915_WRITE(PLANE_POS(pipe, 0), (dst_y << 16) | dst_x);
|
|
}
|
|
|
|
I915_WRITE(PLANE_SURF(pipe, 0), surf_addr);
|
|
|
|
POSTING_READ(PLANE_SURF(pipe, 0));
|
|
}
|
|
|
|
/* Assume fb object is pinned & idle & fenced and just update base pointers */
|
|
static int
|
|
intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
|
|
int x, int y, enum mode_set_atomic state)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (dev_priv->fbc.disable_fbc)
|
|
dev_priv->fbc.disable_fbc(dev_priv);
|
|
|
|
dev_priv->display.update_primary_plane(crtc, fb, x, y);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void intel_complete_page_flips(struct drm_device *dev)
|
|
{
|
|
struct drm_crtc *crtc;
|
|
|
|
for_each_crtc(dev, crtc) {
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
enum plane plane = intel_crtc->plane;
|
|
|
|
intel_prepare_page_flip(dev, plane);
|
|
intel_finish_page_flip_plane(dev, plane);
|
|
}
|
|
}
|
|
|
|
static void intel_update_primary_planes(struct drm_device *dev)
|
|
{
|
|
struct drm_crtc *crtc;
|
|
|
|
for_each_crtc(dev, crtc) {
|
|
struct intel_plane *plane = to_intel_plane(crtc->primary);
|
|
struct intel_plane_state *plane_state;
|
|
|
|
drm_modeset_lock_crtc(crtc, &plane->base);
|
|
plane_state = to_intel_plane_state(plane->base.state);
|
|
|
|
if (crtc->state->active && plane_state->base.fb)
|
|
plane->commit_plane(&plane->base, plane_state);
|
|
|
|
drm_modeset_unlock_crtc(crtc);
|
|
}
|
|
}
|
|
|
|
void intel_prepare_reset(struct drm_device *dev)
|
|
{
|
|
/* no reset support for gen2 */
|
|
if (IS_GEN2(dev))
|
|
return;
|
|
|
|
/* reset doesn't touch the display */
|
|
if (INTEL_INFO(dev)->gen >= 5 || IS_G4X(dev))
|
|
return;
|
|
|
|
drm_modeset_lock_all(dev);
|
|
/*
|
|
* Disabling the crtcs gracefully seems nicer. Also the
|
|
* g33 docs say we should at least disable all the planes.
|
|
*/
|
|
intel_display_suspend(dev);
|
|
}
|
|
|
|
void intel_finish_reset(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
|
|
/*
|
|
* Flips in the rings will be nuked by the reset,
|
|
* so complete all pending flips so that user space
|
|
* will get its events and not get stuck.
|
|
*/
|
|
intel_complete_page_flips(dev);
|
|
|
|
/* no reset support for gen2 */
|
|
if (IS_GEN2(dev))
|
|
return;
|
|
|
|
/* reset doesn't touch the display */
|
|
if (INTEL_INFO(dev)->gen >= 5 || IS_G4X(dev)) {
|
|
/*
|
|
* Flips in the rings have been nuked by the reset,
|
|
* so update the base address of all primary
|
|
* planes to the the last fb to make sure we're
|
|
* showing the correct fb after a reset.
|
|
*
|
|
* FIXME: Atomic will make this obsolete since we won't schedule
|
|
* CS-based flips (which might get lost in gpu resets) any more.
|
|
*/
|
|
intel_update_primary_planes(dev);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* The display has been reset as well,
|
|
* so need a full re-initialization.
|
|
*/
|
|
intel_runtime_pm_disable_interrupts(dev_priv);
|
|
intel_runtime_pm_enable_interrupts(dev_priv);
|
|
|
|
intel_modeset_init_hw(dev);
|
|
|
|
spin_lock_irq(&dev_priv->irq_lock);
|
|
if (dev_priv->display.hpd_irq_setup)
|
|
dev_priv->display.hpd_irq_setup(dev);
|
|
spin_unlock_irq(&dev_priv->irq_lock);
|
|
|
|
intel_display_resume(dev);
|
|
|
|
intel_hpd_init(dev_priv);
|
|
|
|
drm_modeset_unlock_all(dev);
|
|
}
|
|
|
|
static bool intel_crtc_has_pending_flip(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
bool pending;
|
|
|
|
if (i915_reset_in_progress(&dev_priv->gpu_error) ||
|
|
intel_crtc->reset_counter != atomic_read(&dev_priv->gpu_error.reset_counter))
|
|
return false;
|
|
|
|
spin_lock_irq(&dev->event_lock);
|
|
pending = to_intel_crtc(crtc)->unpin_work != NULL;
|
|
spin_unlock_irq(&dev->event_lock);
|
|
|
|
return pending;
|
|
}
|
|
|
|
static void intel_update_pipe_config(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *old_crtc_state)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc_state *pipe_config =
|
|
to_intel_crtc_state(crtc->base.state);
|
|
|
|
/* drm_atomic_helper_update_legacy_modeset_state might not be called. */
|
|
crtc->base.mode = crtc->base.state->mode;
|
|
|
|
DRM_DEBUG_KMS("Updating pipe size %ix%i -> %ix%i\n",
|
|
old_crtc_state->pipe_src_w, old_crtc_state->pipe_src_h,
|
|
pipe_config->pipe_src_w, pipe_config->pipe_src_h);
|
|
|
|
if (HAS_DDI(dev))
|
|
intel_set_pipe_csc(&crtc->base);
|
|
|
|
/*
|
|
* Update pipe size and adjust fitter if needed: the reason for this is
|
|
* that in compute_mode_changes we check the native mode (not the pfit
|
|
* mode) to see if we can flip rather than do a full mode set. In the
|
|
* fastboot case, we'll flip, but if we don't update the pipesrc and
|
|
* pfit state, we'll end up with a big fb scanned out into the wrong
|
|
* sized surface.
|
|
*/
|
|
|
|
I915_WRITE(PIPESRC(crtc->pipe),
|
|
((pipe_config->pipe_src_w - 1) << 16) |
|
|
(pipe_config->pipe_src_h - 1));
|
|
|
|
/* on skylake this is done by detaching scalers */
|
|
if (INTEL_INFO(dev)->gen >= 9) {
|
|
skl_detach_scalers(crtc);
|
|
|
|
if (pipe_config->pch_pfit.enabled)
|
|
skylake_pfit_enable(crtc);
|
|
} else if (HAS_PCH_SPLIT(dev)) {
|
|
if (pipe_config->pch_pfit.enabled)
|
|
ironlake_pfit_enable(crtc);
|
|
else if (old_crtc_state->pch_pfit.enabled)
|
|
ironlake_pfit_disable(crtc, true);
|
|
}
|
|
}
|
|
|
|
static void intel_fdi_normal_train(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
i915_reg_t reg;
|
|
u32 temp;
|
|
|
|
/* enable normal train */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
if (IS_IVYBRIDGE(dev)) {
|
|
temp &= ~FDI_LINK_TRAIN_NONE_IVB;
|
|
temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE;
|
|
} else {
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
|
|
}
|
|
I915_WRITE(reg, temp);
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
if (HAS_PCH_CPT(dev)) {
|
|
temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
|
|
temp |= FDI_LINK_TRAIN_NORMAL_CPT;
|
|
} else {
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_NONE;
|
|
}
|
|
I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
|
|
|
|
/* wait one idle pattern time */
|
|
POSTING_READ(reg);
|
|
udelay(1000);
|
|
|
|
/* IVB wants error correction enabled */
|
|
if (IS_IVYBRIDGE(dev))
|
|
I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE |
|
|
FDI_FE_ERRC_ENABLE);
|
|
}
|
|
|
|
/* The FDI link training functions for ILK/Ibexpeak. */
|
|
static void ironlake_fdi_link_train(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
i915_reg_t reg;
|
|
u32 temp, tries;
|
|
|
|
/* FDI needs bits from pipe first */
|
|
assert_pipe_enabled(dev_priv, pipe);
|
|
|
|
/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
|
|
for train result */
|
|
reg = FDI_RX_IMR(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_RX_SYMBOL_LOCK;
|
|
temp &= ~FDI_RX_BIT_LOCK;
|
|
I915_WRITE(reg, temp);
|
|
I915_READ(reg);
|
|
udelay(150);
|
|
|
|
/* enable CPU FDI TX and PCH FDI RX */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_DP_PORT_WIDTH_MASK;
|
|
temp |= FDI_DP_PORT_WIDTH(intel_crtc->config->fdi_lanes);
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1;
|
|
I915_WRITE(reg, temp | FDI_TX_ENABLE);
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1;
|
|
I915_WRITE(reg, temp | FDI_RX_ENABLE);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(150);
|
|
|
|
/* Ironlake workaround, enable clock pointer after FDI enable*/
|
|
I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
|
|
I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR |
|
|
FDI_RX_PHASE_SYNC_POINTER_EN);
|
|
|
|
reg = FDI_RX_IIR(pipe);
|
|
for (tries = 0; tries < 5; tries++) {
|
|
temp = I915_READ(reg);
|
|
DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
|
|
|
|
if ((temp & FDI_RX_BIT_LOCK)) {
|
|
DRM_DEBUG_KMS("FDI train 1 done.\n");
|
|
I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
|
|
break;
|
|
}
|
|
}
|
|
if (tries == 5)
|
|
DRM_ERROR("FDI train 1 fail!\n");
|
|
|
|
/* Train 2 */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_2;
|
|
I915_WRITE(reg, temp);
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_2;
|
|
I915_WRITE(reg, temp);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(150);
|
|
|
|
reg = FDI_RX_IIR(pipe);
|
|
for (tries = 0; tries < 5; tries++) {
|
|
temp = I915_READ(reg);
|
|
DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
|
|
|
|
if (temp & FDI_RX_SYMBOL_LOCK) {
|
|
I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
|
|
DRM_DEBUG_KMS("FDI train 2 done.\n");
|
|
break;
|
|
}
|
|
}
|
|
if (tries == 5)
|
|
DRM_ERROR("FDI train 2 fail!\n");
|
|
|
|
DRM_DEBUG_KMS("FDI train done\n");
|
|
|
|
}
|
|
|
|
static const int snb_b_fdi_train_param[] = {
|
|
FDI_LINK_TRAIN_400MV_0DB_SNB_B,
|
|
FDI_LINK_TRAIN_400MV_6DB_SNB_B,
|
|
FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
|
|
FDI_LINK_TRAIN_800MV_0DB_SNB_B,
|
|
};
|
|
|
|
/* The FDI link training functions for SNB/Cougarpoint. */
|
|
static void gen6_fdi_link_train(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
i915_reg_t reg;
|
|
u32 temp, i, retry;
|
|
|
|
/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
|
|
for train result */
|
|
reg = FDI_RX_IMR(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_RX_SYMBOL_LOCK;
|
|
temp &= ~FDI_RX_BIT_LOCK;
|
|
I915_WRITE(reg, temp);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(150);
|
|
|
|
/* enable CPU FDI TX and PCH FDI RX */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_DP_PORT_WIDTH_MASK;
|
|
temp |= FDI_DP_PORT_WIDTH(intel_crtc->config->fdi_lanes);
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1;
|
|
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
|
|
/* SNB-B */
|
|
temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
|
|
I915_WRITE(reg, temp | FDI_TX_ENABLE);
|
|
|
|
I915_WRITE(FDI_RX_MISC(pipe),
|
|
FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
if (HAS_PCH_CPT(dev)) {
|
|
temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
|
|
} else {
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1;
|
|
}
|
|
I915_WRITE(reg, temp | FDI_RX_ENABLE);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(150);
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
|
|
temp |= snb_b_fdi_train_param[i];
|
|
I915_WRITE(reg, temp);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(500);
|
|
|
|
for (retry = 0; retry < 5; retry++) {
|
|
reg = FDI_RX_IIR(pipe);
|
|
temp = I915_READ(reg);
|
|
DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
|
|
if (temp & FDI_RX_BIT_LOCK) {
|
|
I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
|
|
DRM_DEBUG_KMS("FDI train 1 done.\n");
|
|
break;
|
|
}
|
|
udelay(50);
|
|
}
|
|
if (retry < 5)
|
|
break;
|
|
}
|
|
if (i == 4)
|
|
DRM_ERROR("FDI train 1 fail!\n");
|
|
|
|
/* Train 2 */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_2;
|
|
if (IS_GEN6(dev)) {
|
|
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
|
|
/* SNB-B */
|
|
temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
|
|
}
|
|
I915_WRITE(reg, temp);
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
if (HAS_PCH_CPT(dev)) {
|
|
temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
|
|
} else {
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_2;
|
|
}
|
|
I915_WRITE(reg, temp);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(150);
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
|
|
temp |= snb_b_fdi_train_param[i];
|
|
I915_WRITE(reg, temp);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(500);
|
|
|
|
for (retry = 0; retry < 5; retry++) {
|
|
reg = FDI_RX_IIR(pipe);
|
|
temp = I915_READ(reg);
|
|
DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
|
|
if (temp & FDI_RX_SYMBOL_LOCK) {
|
|
I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
|
|
DRM_DEBUG_KMS("FDI train 2 done.\n");
|
|
break;
|
|
}
|
|
udelay(50);
|
|
}
|
|
if (retry < 5)
|
|
break;
|
|
}
|
|
if (i == 4)
|
|
DRM_ERROR("FDI train 2 fail!\n");
|
|
|
|
DRM_DEBUG_KMS("FDI train done.\n");
|
|
}
|
|
|
|
/* Manual link training for Ivy Bridge A0 parts */
|
|
static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
i915_reg_t reg;
|
|
u32 temp, i, j;
|
|
|
|
/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
|
|
for train result */
|
|
reg = FDI_RX_IMR(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_RX_SYMBOL_LOCK;
|
|
temp &= ~FDI_RX_BIT_LOCK;
|
|
I915_WRITE(reg, temp);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(150);
|
|
|
|
DRM_DEBUG_KMS("FDI_RX_IIR before link train 0x%x\n",
|
|
I915_READ(FDI_RX_IIR(pipe)));
|
|
|
|
/* Try each vswing and preemphasis setting twice before moving on */
|
|
for (j = 0; j < ARRAY_SIZE(snb_b_fdi_train_param) * 2; j++) {
|
|
/* disable first in case we need to retry */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
|
|
temp &= ~FDI_TX_ENABLE;
|
|
I915_WRITE(reg, temp);
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_LINK_TRAIN_AUTO;
|
|
temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
|
|
temp &= ~FDI_RX_ENABLE;
|
|
I915_WRITE(reg, temp);
|
|
|
|
/* enable CPU FDI TX and PCH FDI RX */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_DP_PORT_WIDTH_MASK;
|
|
temp |= FDI_DP_PORT_WIDTH(intel_crtc->config->fdi_lanes);
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
|
|
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
|
|
temp |= snb_b_fdi_train_param[j/2];
|
|
temp |= FDI_COMPOSITE_SYNC;
|
|
I915_WRITE(reg, temp | FDI_TX_ENABLE);
|
|
|
|
I915_WRITE(FDI_RX_MISC(pipe),
|
|
FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
|
|
temp |= FDI_COMPOSITE_SYNC;
|
|
I915_WRITE(reg, temp | FDI_RX_ENABLE);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(1); /* should be 0.5us */
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
reg = FDI_RX_IIR(pipe);
|
|
temp = I915_READ(reg);
|
|
DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
|
|
|
|
if (temp & FDI_RX_BIT_LOCK ||
|
|
(I915_READ(reg) & FDI_RX_BIT_LOCK)) {
|
|
I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
|
|
DRM_DEBUG_KMS("FDI train 1 done, level %i.\n",
|
|
i);
|
|
break;
|
|
}
|
|
udelay(1); /* should be 0.5us */
|
|
}
|
|
if (i == 4) {
|
|
DRM_DEBUG_KMS("FDI train 1 fail on vswing %d\n", j / 2);
|
|
continue;
|
|
}
|
|
|
|
/* Train 2 */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_LINK_TRAIN_NONE_IVB;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
|
|
I915_WRITE(reg, temp);
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
|
|
I915_WRITE(reg, temp);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(2); /* should be 1.5us */
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
reg = FDI_RX_IIR(pipe);
|
|
temp = I915_READ(reg);
|
|
DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
|
|
|
|
if (temp & FDI_RX_SYMBOL_LOCK ||
|
|
(I915_READ(reg) & FDI_RX_SYMBOL_LOCK)) {
|
|
I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
|
|
DRM_DEBUG_KMS("FDI train 2 done, level %i.\n",
|
|
i);
|
|
goto train_done;
|
|
}
|
|
udelay(2); /* should be 1.5us */
|
|
}
|
|
if (i == 4)
|
|
DRM_DEBUG_KMS("FDI train 2 fail on vswing %d\n", j / 2);
|
|
}
|
|
|
|
train_done:
|
|
DRM_DEBUG_KMS("FDI train done.\n");
|
|
}
|
|
|
|
static void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc)
|
|
{
|
|
struct drm_device *dev = intel_crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int pipe = intel_crtc->pipe;
|
|
i915_reg_t reg;
|
|
u32 temp;
|
|
|
|
/* enable PCH FDI RX PLL, wait warmup plus DMI latency */
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~(FDI_DP_PORT_WIDTH_MASK | (0x7 << 16));
|
|
temp |= FDI_DP_PORT_WIDTH(intel_crtc->config->fdi_lanes);
|
|
temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
|
|
I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(200);
|
|
|
|
/* Switch from Rawclk to PCDclk */
|
|
temp = I915_READ(reg);
|
|
I915_WRITE(reg, temp | FDI_PCDCLK);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(200);
|
|
|
|
/* Enable CPU FDI TX PLL, always on for Ironlake */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
if ((temp & FDI_TX_PLL_ENABLE) == 0) {
|
|
I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(100);
|
|
}
|
|
}
|
|
|
|
static void ironlake_fdi_pll_disable(struct intel_crtc *intel_crtc)
|
|
{
|
|
struct drm_device *dev = intel_crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int pipe = intel_crtc->pipe;
|
|
i915_reg_t reg;
|
|
u32 temp;
|
|
|
|
/* Switch from PCDclk to Rawclk */
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
I915_WRITE(reg, temp & ~FDI_PCDCLK);
|
|
|
|
/* Disable CPU FDI TX PLL */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(100);
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE);
|
|
|
|
/* Wait for the clocks to turn off. */
|
|
POSTING_READ(reg);
|
|
udelay(100);
|
|
}
|
|
|
|
static void ironlake_fdi_disable(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
i915_reg_t reg;
|
|
u32 temp;
|
|
|
|
/* disable CPU FDI tx and PCH FDI rx */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
|
|
POSTING_READ(reg);
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~(0x7 << 16);
|
|
temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
|
|
I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(100);
|
|
|
|
/* Ironlake workaround, disable clock pointer after downing FDI */
|
|
if (HAS_PCH_IBX(dev))
|
|
I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
|
|
|
|
/* still set train pattern 1 */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1;
|
|
I915_WRITE(reg, temp);
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
if (HAS_PCH_CPT(dev)) {
|
|
temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
|
|
} else {
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1;
|
|
}
|
|
/* BPC in FDI rx is consistent with that in PIPECONF */
|
|
temp &= ~(0x07 << 16);
|
|
temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
|
|
I915_WRITE(reg, temp);
|
|
|
|
POSTING_READ(reg);
|
|
udelay(100);
|
|
}
|
|
|
|
bool intel_has_pending_fb_unpin(struct drm_device *dev)
|
|
{
|
|
struct intel_crtc *crtc;
|
|
|
|
/* Note that we don't need to be called with mode_config.lock here
|
|
* as our list of CRTC objects is static for the lifetime of the
|
|
* device and so cannot disappear as we iterate. Similarly, we can
|
|
* happily treat the predicates as racy, atomic checks as userspace
|
|
* cannot claim and pin a new fb without at least acquring the
|
|
* struct_mutex and so serialising with us.
|
|
*/
|
|
for_each_intel_crtc(dev, crtc) {
|
|
if (atomic_read(&crtc->unpin_work_count) == 0)
|
|
continue;
|
|
|
|
if (crtc->unpin_work)
|
|
intel_wait_for_vblank(dev, crtc->pipe);
|
|
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static void page_flip_completed(struct intel_crtc *intel_crtc)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
|
|
struct intel_unpin_work *work = intel_crtc->unpin_work;
|
|
|
|
/* ensure that the unpin work is consistent wrt ->pending. */
|
|
smp_rmb();
|
|
intel_crtc->unpin_work = NULL;
|
|
|
|
if (work->event)
|
|
drm_send_vblank_event(intel_crtc->base.dev,
|
|
intel_crtc->pipe,
|
|
work->event);
|
|
|
|
drm_crtc_vblank_put(&intel_crtc->base);
|
|
|
|
wake_up_all(&dev_priv->pending_flip_queue);
|
|
queue_work(dev_priv->wq, &work->work);
|
|
|
|
trace_i915_flip_complete(intel_crtc->plane,
|
|
work->pending_flip_obj);
|
|
}
|
|
|
|
static int intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
long ret;
|
|
|
|
WARN_ON(waitqueue_active(&dev_priv->pending_flip_queue));
|
|
|
|
ret = wait_event_interruptible_timeout(
|
|
dev_priv->pending_flip_queue,
|
|
!intel_crtc_has_pending_flip(crtc),
|
|
60*HZ);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (ret == 0) {
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
|
|
spin_lock_irq(&dev->event_lock);
|
|
if (intel_crtc->unpin_work) {
|
|
WARN_ONCE(1, "Removing stuck page flip\n");
|
|
page_flip_completed(intel_crtc);
|
|
}
|
|
spin_unlock_irq(&dev->event_lock);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Program iCLKIP clock to the desired frequency */
|
|
static void lpt_program_iclkip(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int clock = to_intel_crtc(crtc)->config->base.adjusted_mode.crtc_clock;
|
|
u32 divsel, phaseinc, auxdiv, phasedir = 0;
|
|
u32 temp;
|
|
|
|
mutex_lock(&dev_priv->sb_lock);
|
|
|
|
/* It is necessary to ungate the pixclk gate prior to programming
|
|
* the divisors, and gate it back when it is done.
|
|
*/
|
|
I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_GATE);
|
|
|
|
/* Disable SSCCTL */
|
|
intel_sbi_write(dev_priv, SBI_SSCCTL6,
|
|
intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK) |
|
|
SBI_SSCCTL_DISABLE,
|
|
SBI_ICLK);
|
|
|
|
/* 20MHz is a corner case which is out of range for the 7-bit divisor */
|
|
if (clock == 20000) {
|
|
auxdiv = 1;
|
|
divsel = 0x41;
|
|
phaseinc = 0x20;
|
|
} else {
|
|
/* The iCLK virtual clock root frequency is in MHz,
|
|
* but the adjusted_mode->crtc_clock in in KHz. To get the
|
|
* divisors, it is necessary to divide one by another, so we
|
|
* convert the virtual clock precision to KHz here for higher
|
|
* precision.
|
|
*/
|
|
u32 iclk_virtual_root_freq = 172800 * 1000;
|
|
u32 iclk_pi_range = 64;
|
|
u32 desired_divisor, msb_divisor_value, pi_value;
|
|
|
|
desired_divisor = (iclk_virtual_root_freq / clock);
|
|
msb_divisor_value = desired_divisor / iclk_pi_range;
|
|
pi_value = desired_divisor % iclk_pi_range;
|
|
|
|
auxdiv = 0;
|
|
divsel = msb_divisor_value - 2;
|
|
phaseinc = pi_value;
|
|
}
|
|
|
|
/* This should not happen with any sane values */
|
|
WARN_ON(SBI_SSCDIVINTPHASE_DIVSEL(divsel) &
|
|
~SBI_SSCDIVINTPHASE_DIVSEL_MASK);
|
|
WARN_ON(SBI_SSCDIVINTPHASE_DIR(phasedir) &
|
|
~SBI_SSCDIVINTPHASE_INCVAL_MASK);
|
|
|
|
DRM_DEBUG_KMS("iCLKIP clock: found settings for %dKHz refresh rate: auxdiv=%x, divsel=%x, phasedir=%x, phaseinc=%x\n",
|
|
clock,
|
|
auxdiv,
|
|
divsel,
|
|
phasedir,
|
|
phaseinc);
|
|
|
|
/* Program SSCDIVINTPHASE6 */
|
|
temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6, SBI_ICLK);
|
|
temp &= ~SBI_SSCDIVINTPHASE_DIVSEL_MASK;
|
|
temp |= SBI_SSCDIVINTPHASE_DIVSEL(divsel);
|
|
temp &= ~SBI_SSCDIVINTPHASE_INCVAL_MASK;
|
|
temp |= SBI_SSCDIVINTPHASE_INCVAL(phaseinc);
|
|
temp |= SBI_SSCDIVINTPHASE_DIR(phasedir);
|
|
temp |= SBI_SSCDIVINTPHASE_PROPAGATE;
|
|
intel_sbi_write(dev_priv, SBI_SSCDIVINTPHASE6, temp, SBI_ICLK);
|
|
|
|
/* Program SSCAUXDIV */
|
|
temp = intel_sbi_read(dev_priv, SBI_SSCAUXDIV6, SBI_ICLK);
|
|
temp &= ~SBI_SSCAUXDIV_FINALDIV2SEL(1);
|
|
temp |= SBI_SSCAUXDIV_FINALDIV2SEL(auxdiv);
|
|
intel_sbi_write(dev_priv, SBI_SSCAUXDIV6, temp, SBI_ICLK);
|
|
|
|
/* Enable modulator and associated divider */
|
|
temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK);
|
|
temp &= ~SBI_SSCCTL_DISABLE;
|
|
intel_sbi_write(dev_priv, SBI_SSCCTL6, temp, SBI_ICLK);
|
|
|
|
/* Wait for initialization time */
|
|
udelay(24);
|
|
|
|
I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_UNGATE);
|
|
|
|
mutex_unlock(&dev_priv->sb_lock);
|
|
}
|
|
|
|
static void ironlake_pch_transcoder_set_timings(struct intel_crtc *crtc,
|
|
enum pipe pch_transcoder)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
|
|
|
|
I915_WRITE(PCH_TRANS_HTOTAL(pch_transcoder),
|
|
I915_READ(HTOTAL(cpu_transcoder)));
|
|
I915_WRITE(PCH_TRANS_HBLANK(pch_transcoder),
|
|
I915_READ(HBLANK(cpu_transcoder)));
|
|
I915_WRITE(PCH_TRANS_HSYNC(pch_transcoder),
|
|
I915_READ(HSYNC(cpu_transcoder)));
|
|
|
|
I915_WRITE(PCH_TRANS_VTOTAL(pch_transcoder),
|
|
I915_READ(VTOTAL(cpu_transcoder)));
|
|
I915_WRITE(PCH_TRANS_VBLANK(pch_transcoder),
|
|
I915_READ(VBLANK(cpu_transcoder)));
|
|
I915_WRITE(PCH_TRANS_VSYNC(pch_transcoder),
|
|
I915_READ(VSYNC(cpu_transcoder)));
|
|
I915_WRITE(PCH_TRANS_VSYNCSHIFT(pch_transcoder),
|
|
I915_READ(VSYNCSHIFT(cpu_transcoder)));
|
|
}
|
|
|
|
static void cpt_set_fdi_bc_bifurcation(struct drm_device *dev, bool enable)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t temp;
|
|
|
|
temp = I915_READ(SOUTH_CHICKEN1);
|
|
if (!!(temp & FDI_BC_BIFURCATION_SELECT) == enable)
|
|
return;
|
|
|
|
WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
|
|
WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
|
|
|
|
temp &= ~FDI_BC_BIFURCATION_SELECT;
|
|
if (enable)
|
|
temp |= FDI_BC_BIFURCATION_SELECT;
|
|
|
|
DRM_DEBUG_KMS("%sabling fdi C rx\n", enable ? "en" : "dis");
|
|
I915_WRITE(SOUTH_CHICKEN1, temp);
|
|
POSTING_READ(SOUTH_CHICKEN1);
|
|
}
|
|
|
|
static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc)
|
|
{
|
|
struct drm_device *dev = intel_crtc->base.dev;
|
|
|
|
switch (intel_crtc->pipe) {
|
|
case PIPE_A:
|
|
break;
|
|
case PIPE_B:
|
|
if (intel_crtc->config->fdi_lanes > 2)
|
|
cpt_set_fdi_bc_bifurcation(dev, false);
|
|
else
|
|
cpt_set_fdi_bc_bifurcation(dev, true);
|
|
|
|
break;
|
|
case PIPE_C:
|
|
cpt_set_fdi_bc_bifurcation(dev, true);
|
|
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
/* Return which DP Port should be selected for Transcoder DP control */
|
|
static enum port
|
|
intel_trans_dp_port_sel(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct intel_encoder *encoder;
|
|
|
|
for_each_encoder_on_crtc(dev, crtc, encoder) {
|
|
if (encoder->type == INTEL_OUTPUT_DISPLAYPORT ||
|
|
encoder->type == INTEL_OUTPUT_EDP)
|
|
return enc_to_dig_port(&encoder->base)->port;
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Enable PCH resources required for PCH ports:
|
|
* - PCH PLLs
|
|
* - FDI training & RX/TX
|
|
* - update transcoder timings
|
|
* - DP transcoding bits
|
|
* - transcoder
|
|
*/
|
|
static void ironlake_pch_enable(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
u32 temp;
|
|
|
|
assert_pch_transcoder_disabled(dev_priv, pipe);
|
|
|
|
if (IS_IVYBRIDGE(dev))
|
|
ivybridge_update_fdi_bc_bifurcation(intel_crtc);
|
|
|
|
/* Write the TU size bits before fdi link training, so that error
|
|
* detection works. */
|
|
I915_WRITE(FDI_RX_TUSIZE1(pipe),
|
|
I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK);
|
|
|
|
/* For PCH output, training FDI link */
|
|
dev_priv->display.fdi_link_train(crtc);
|
|
|
|
/* We need to program the right clock selection before writing the pixel
|
|
* mutliplier into the DPLL. */
|
|
if (HAS_PCH_CPT(dev)) {
|
|
u32 sel;
|
|
|
|
temp = I915_READ(PCH_DPLL_SEL);
|
|
temp |= TRANS_DPLL_ENABLE(pipe);
|
|
sel = TRANS_DPLLB_SEL(pipe);
|
|
if (intel_crtc->config->shared_dpll == DPLL_ID_PCH_PLL_B)
|
|
temp |= sel;
|
|
else
|
|
temp &= ~sel;
|
|
I915_WRITE(PCH_DPLL_SEL, temp);
|
|
}
|
|
|
|
/* XXX: pch pll's can be enabled any time before we enable the PCH
|
|
* transcoder, and we actually should do this to not upset any PCH
|
|
* transcoder that already use the clock when we share it.
|
|
*
|
|
* Note that enable_shared_dpll tries to do the right thing, but
|
|
* get_shared_dpll unconditionally resets the pll - we need that to have
|
|
* the right LVDS enable sequence. */
|
|
intel_enable_shared_dpll(intel_crtc);
|
|
|
|
/* set transcoder timing, panel must allow it */
|
|
assert_panel_unlocked(dev_priv, pipe);
|
|
ironlake_pch_transcoder_set_timings(intel_crtc, pipe);
|
|
|
|
intel_fdi_normal_train(crtc);
|
|
|
|
/* For PCH DP, enable TRANS_DP_CTL */
|
|
if (HAS_PCH_CPT(dev) && intel_crtc->config->has_dp_encoder) {
|
|
const struct drm_display_mode *adjusted_mode =
|
|
&intel_crtc->config->base.adjusted_mode;
|
|
u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) >> 5;
|
|
i915_reg_t reg = TRANS_DP_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~(TRANS_DP_PORT_SEL_MASK |
|
|
TRANS_DP_SYNC_MASK |
|
|
TRANS_DP_BPC_MASK);
|
|
temp |= TRANS_DP_OUTPUT_ENABLE;
|
|
temp |= bpc << 9; /* same format but at 11:9 */
|
|
|
|
if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
|
|
temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
|
|
if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
|
|
temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
|
|
|
|
switch (intel_trans_dp_port_sel(crtc)) {
|
|
case PORT_B:
|
|
temp |= TRANS_DP_PORT_SEL_B;
|
|
break;
|
|
case PORT_C:
|
|
temp |= TRANS_DP_PORT_SEL_C;
|
|
break;
|
|
case PORT_D:
|
|
temp |= TRANS_DP_PORT_SEL_D;
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
|
|
I915_WRITE(reg, temp);
|
|
}
|
|
|
|
ironlake_enable_pch_transcoder(dev_priv, pipe);
|
|
}
|
|
|
|
static void lpt_pch_enable(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
|
|
|
|
assert_pch_transcoder_disabled(dev_priv, TRANSCODER_A);
|
|
|
|
lpt_program_iclkip(crtc);
|
|
|
|
/* Set transcoder timing. */
|
|
ironlake_pch_transcoder_set_timings(intel_crtc, PIPE_A);
|
|
|
|
lpt_enable_pch_transcoder(dev_priv, cpu_transcoder);
|
|
}
|
|
|
|
struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
|
|
struct intel_shared_dpll *pll;
|
|
struct intel_shared_dpll_config *shared_dpll;
|
|
enum intel_dpll_id i;
|
|
|
|
shared_dpll = intel_atomic_get_shared_dpll_state(crtc_state->base.state);
|
|
|
|
if (HAS_PCH_IBX(dev_priv->dev)) {
|
|
/* Ironlake PCH has a fixed PLL->PCH pipe mapping. */
|
|
i = (enum intel_dpll_id) crtc->pipe;
|
|
pll = &dev_priv->shared_dplls[i];
|
|
|
|
DRM_DEBUG_KMS("CRTC:%d using pre-allocated %s\n",
|
|
crtc->base.base.id, pll->name);
|
|
|
|
WARN_ON(shared_dpll[i].crtc_mask);
|
|
|
|
goto found;
|
|
}
|
|
|
|
if (IS_BROXTON(dev_priv->dev)) {
|
|
/* PLL is attached to port in bxt */
|
|
struct intel_encoder *encoder;
|
|
struct intel_digital_port *intel_dig_port;
|
|
|
|
encoder = intel_ddi_get_crtc_new_encoder(crtc_state);
|
|
if (WARN_ON(!encoder))
|
|
return NULL;
|
|
|
|
intel_dig_port = enc_to_dig_port(&encoder->base);
|
|
/* 1:1 mapping between ports and PLLs */
|
|
i = (enum intel_dpll_id)intel_dig_port->port;
|
|
pll = &dev_priv->shared_dplls[i];
|
|
DRM_DEBUG_KMS("CRTC:%d using pre-allocated %s\n",
|
|
crtc->base.base.id, pll->name);
|
|
WARN_ON(shared_dpll[i].crtc_mask);
|
|
|
|
goto found;
|
|
}
|
|
|
|
for (i = 0; i < dev_priv->num_shared_dpll; i++) {
|
|
pll = &dev_priv->shared_dplls[i];
|
|
|
|
/* Only want to check enabled timings first */
|
|
if (shared_dpll[i].crtc_mask == 0)
|
|
continue;
|
|
|
|
if (memcmp(&crtc_state->dpll_hw_state,
|
|
&shared_dpll[i].hw_state,
|
|
sizeof(crtc_state->dpll_hw_state)) == 0) {
|
|
DRM_DEBUG_KMS("CRTC:%d sharing existing %s (crtc mask 0x%08x, ative %d)\n",
|
|
crtc->base.base.id, pll->name,
|
|
shared_dpll[i].crtc_mask,
|
|
pll->active);
|
|
goto found;
|
|
}
|
|
}
|
|
|
|
/* Ok no matching timings, maybe there's a free one? */
|
|
for (i = 0; i < dev_priv->num_shared_dpll; i++) {
|
|
pll = &dev_priv->shared_dplls[i];
|
|
if (shared_dpll[i].crtc_mask == 0) {
|
|
DRM_DEBUG_KMS("CRTC:%d allocated %s\n",
|
|
crtc->base.base.id, pll->name);
|
|
goto found;
|
|
}
|
|
}
|
|
|
|
return NULL;
|
|
|
|
found:
|
|
if (shared_dpll[i].crtc_mask == 0)
|
|
shared_dpll[i].hw_state =
|
|
crtc_state->dpll_hw_state;
|
|
|
|
crtc_state->shared_dpll = i;
|
|
DRM_DEBUG_DRIVER("using %s for pipe %c\n", pll->name,
|
|
pipe_name(crtc->pipe));
|
|
|
|
shared_dpll[i].crtc_mask |= 1 << crtc->pipe;
|
|
|
|
return pll;
|
|
}
|
|
|
|
static void intel_shared_dpll_commit(struct drm_atomic_state *state)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(state->dev);
|
|
struct intel_shared_dpll_config *shared_dpll;
|
|
struct intel_shared_dpll *pll;
|
|
enum intel_dpll_id i;
|
|
|
|
if (!to_intel_atomic_state(state)->dpll_set)
|
|
return;
|
|
|
|
shared_dpll = to_intel_atomic_state(state)->shared_dpll;
|
|
for (i = 0; i < dev_priv->num_shared_dpll; i++) {
|
|
pll = &dev_priv->shared_dplls[i];
|
|
pll->config = shared_dpll[i];
|
|
}
|
|
}
|
|
|
|
static void cpt_verify_modeset(struct drm_device *dev, int pipe)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
i915_reg_t dslreg = PIPEDSL(pipe);
|
|
u32 temp;
|
|
|
|
temp = I915_READ(dslreg);
|
|
udelay(500);
|
|
if (wait_for(I915_READ(dslreg) != temp, 5)) {
|
|
if (wait_for(I915_READ(dslreg) != temp, 5))
|
|
DRM_ERROR("mode set failed: pipe %c stuck\n", pipe_name(pipe));
|
|
}
|
|
}
|
|
|
|
static int
|
|
skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
|
|
unsigned scaler_user, int *scaler_id, unsigned int rotation,
|
|
int src_w, int src_h, int dst_w, int dst_h)
|
|
{
|
|
struct intel_crtc_scaler_state *scaler_state =
|
|
&crtc_state->scaler_state;
|
|
struct intel_crtc *intel_crtc =
|
|
to_intel_crtc(crtc_state->base.crtc);
|
|
int need_scaling;
|
|
|
|
need_scaling = intel_rotation_90_or_270(rotation) ?
|
|
(src_h != dst_w || src_w != dst_h):
|
|
(src_w != dst_w || src_h != dst_h);
|
|
|
|
/*
|
|
* if plane is being disabled or scaler is no more required or force detach
|
|
* - free scaler binded to this plane/crtc
|
|
* - in order to do this, update crtc->scaler_usage
|
|
*
|
|
* Here scaler state in crtc_state is set free so that
|
|
* scaler can be assigned to other user. Actual register
|
|
* update to free the scaler is done in plane/panel-fit programming.
|
|
* For this purpose crtc/plane_state->scaler_id isn't reset here.
|
|
*/
|
|
if (force_detach || !need_scaling) {
|
|
if (*scaler_id >= 0) {
|
|
scaler_state->scaler_users &= ~(1 << scaler_user);
|
|
scaler_state->scalers[*scaler_id].in_use = 0;
|
|
|
|
DRM_DEBUG_KMS("scaler_user index %u.%u: "
|
|
"Staged freeing scaler id %d scaler_users = 0x%x\n",
|
|
intel_crtc->pipe, scaler_user, *scaler_id,
|
|
scaler_state->scaler_users);
|
|
*scaler_id = -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* range checks */
|
|
if (src_w < SKL_MIN_SRC_W || src_h < SKL_MIN_SRC_H ||
|
|
dst_w < SKL_MIN_DST_W || dst_h < SKL_MIN_DST_H ||
|
|
|
|
src_w > SKL_MAX_SRC_W || src_h > SKL_MAX_SRC_H ||
|
|
dst_w > SKL_MAX_DST_W || dst_h > SKL_MAX_DST_H) {
|
|
DRM_DEBUG_KMS("scaler_user index %u.%u: src %ux%u dst %ux%u "
|
|
"size is out of scaler range\n",
|
|
intel_crtc->pipe, scaler_user, src_w, src_h, dst_w, dst_h);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* mark this plane as a scaler user in crtc_state */
|
|
scaler_state->scaler_users |= (1 << scaler_user);
|
|
DRM_DEBUG_KMS("scaler_user index %u.%u: "
|
|
"staged scaling request for %ux%u->%ux%u scaler_users = 0x%x\n",
|
|
intel_crtc->pipe, scaler_user, src_w, src_h, dst_w, dst_h,
|
|
scaler_state->scaler_users);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* skl_update_scaler_crtc - Stages update to scaler state for a given crtc.
|
|
*
|
|
* @state: crtc's scaler state
|
|
*
|
|
* Return
|
|
* 0 - scaler_usage updated successfully
|
|
* error - requested scaling cannot be supported or other error condition
|
|
*/
|
|
int skl_update_scaler_crtc(struct intel_crtc_state *state)
|
|
{
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(state->base.crtc);
|
|
const struct drm_display_mode *adjusted_mode = &state->base.adjusted_mode;
|
|
|
|
DRM_DEBUG_KMS("Updating scaler for [CRTC:%i] scaler_user index %u.%u\n",
|
|
intel_crtc->base.base.id, intel_crtc->pipe, SKL_CRTC_INDEX);
|
|
|
|
return skl_update_scaler(state, !state->base.active, SKL_CRTC_INDEX,
|
|
&state->scaler_state.scaler_id, DRM_ROTATE_0,
|
|
state->pipe_src_w, state->pipe_src_h,
|
|
adjusted_mode->crtc_hdisplay, adjusted_mode->crtc_vdisplay);
|
|
}
|
|
|
|
/**
|
|
* skl_update_scaler_plane - Stages update to scaler state for a given plane.
|
|
*
|
|
* @state: crtc's scaler state
|
|
* @plane_state: atomic plane state to update
|
|
*
|
|
* Return
|
|
* 0 - scaler_usage updated successfully
|
|
* error - requested scaling cannot be supported or other error condition
|
|
*/
|
|
static int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,
|
|
struct intel_plane_state *plane_state)
|
|
{
|
|
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
|
|
struct intel_plane *intel_plane =
|
|
to_intel_plane(plane_state->base.plane);
|
|
struct drm_framebuffer *fb = plane_state->base.fb;
|
|
int ret;
|
|
|
|
bool force_detach = !fb || !plane_state->visible;
|
|
|
|
DRM_DEBUG_KMS("Updating scaler for [PLANE:%d] scaler_user index %u.%u\n",
|
|
intel_plane->base.base.id, intel_crtc->pipe,
|
|
drm_plane_index(&intel_plane->base));
|
|
|
|
ret = skl_update_scaler(crtc_state, force_detach,
|
|
drm_plane_index(&intel_plane->base),
|
|
&plane_state->scaler_id,
|
|
plane_state->base.rotation,
|
|
drm_rect_width(&plane_state->src) >> 16,
|
|
drm_rect_height(&plane_state->src) >> 16,
|
|
drm_rect_width(&plane_state->dst),
|
|
drm_rect_height(&plane_state->dst));
|
|
|
|
if (ret || plane_state->scaler_id < 0)
|
|
return ret;
|
|
|
|
/* check colorkey */
|
|
if (plane_state->ckey.flags != I915_SET_COLORKEY_NONE) {
|
|
DRM_DEBUG_KMS("[PLANE:%d] scaling with color key not allowed",
|
|
intel_plane->base.base.id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Check src format */
|
|
switch (fb->pixel_format) {
|
|
case DRM_FORMAT_RGB565:
|
|
case DRM_FORMAT_XBGR8888:
|
|
case DRM_FORMAT_XRGB8888:
|
|
case DRM_FORMAT_ABGR8888:
|
|
case DRM_FORMAT_ARGB8888:
|
|
case DRM_FORMAT_XRGB2101010:
|
|
case DRM_FORMAT_XBGR2101010:
|
|
case DRM_FORMAT_YUYV:
|
|
case DRM_FORMAT_YVYU:
|
|
case DRM_FORMAT_UYVY:
|
|
case DRM_FORMAT_VYUY:
|
|
break;
|
|
default:
|
|
DRM_DEBUG_KMS("[PLANE:%d] FB:%d unsupported scaling format 0x%x\n",
|
|
intel_plane->base.base.id, fb->base.id, fb->pixel_format);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void skylake_scaler_disable(struct intel_crtc *crtc)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < crtc->num_scalers; i++)
|
|
skl_detach_scaler(crtc, i);
|
|
}
|
|
|
|
static void skylake_pfit_enable(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int pipe = crtc->pipe;
|
|
struct intel_crtc_scaler_state *scaler_state =
|
|
&crtc->config->scaler_state;
|
|
|
|
DRM_DEBUG_KMS("for crtc_state = %p\n", crtc->config);
|
|
|
|
if (crtc->config->pch_pfit.enabled) {
|
|
int id;
|
|
|
|
if (WARN_ON(crtc->config->scaler_state.scaler_id < 0)) {
|
|
DRM_ERROR("Requesting pfit without getting a scaler first\n");
|
|
return;
|
|
}
|
|
|
|
id = scaler_state->scaler_id;
|
|
I915_WRITE(SKL_PS_CTRL(pipe, id), PS_SCALER_EN |
|
|
PS_FILTER_MEDIUM | scaler_state->scalers[id].mode);
|
|
I915_WRITE(SKL_PS_WIN_POS(pipe, id), crtc->config->pch_pfit.pos);
|
|
I915_WRITE(SKL_PS_WIN_SZ(pipe, id), crtc->config->pch_pfit.size);
|
|
|
|
DRM_DEBUG_KMS("for crtc_state = %p scaler_id = %d\n", crtc->config, id);
|
|
}
|
|
}
|
|
|
|
static void ironlake_pfit_enable(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int pipe = crtc->pipe;
|
|
|
|
if (crtc->config->pch_pfit.enabled) {
|
|
/* Force use of hard-coded filter coefficients
|
|
* as some pre-programmed values are broken,
|
|
* e.g. x201.
|
|
*/
|
|
if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev))
|
|
I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3 |
|
|
PF_PIPE_SEL_IVB(pipe));
|
|
else
|
|
I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3);
|
|
I915_WRITE(PF_WIN_POS(pipe), crtc->config->pch_pfit.pos);
|
|
I915_WRITE(PF_WIN_SZ(pipe), crtc->config->pch_pfit.size);
|
|
}
|
|
}
|
|
|
|
void hsw_enable_ips(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (!crtc->config->ips_enabled)
|
|
return;
|
|
|
|
/* We can only enable IPS after we enable a plane and wait for a vblank */
|
|
intel_wait_for_vblank(dev, crtc->pipe);
|
|
|
|
assert_plane_enabled(dev_priv, crtc->plane);
|
|
if (IS_BROADWELL(dev)) {
|
|
mutex_lock(&dev_priv->rps.hw_lock);
|
|
WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0xc0000000));
|
|
mutex_unlock(&dev_priv->rps.hw_lock);
|
|
/* Quoting Art Runyan: "its not safe to expect any particular
|
|
* value in IPS_CTL bit 31 after enabling IPS through the
|
|
* mailbox." Moreover, the mailbox may return a bogus state,
|
|
* so we need to just enable it and continue on.
|
|
*/
|
|
} else {
|
|
I915_WRITE(IPS_CTL, IPS_ENABLE);
|
|
/* The bit only becomes 1 in the next vblank, so this wait here
|
|
* is essentially intel_wait_for_vblank. If we don't have this
|
|
* and don't wait for vblanks until the end of crtc_enable, then
|
|
* the HW state readout code will complain that the expected
|
|
* IPS_CTL value is not the one we read. */
|
|
if (wait_for(I915_READ_NOTRACE(IPS_CTL) & IPS_ENABLE, 50))
|
|
DRM_ERROR("Timed out waiting for IPS enable\n");
|
|
}
|
|
}
|
|
|
|
void hsw_disable_ips(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (!crtc->config->ips_enabled)
|
|
return;
|
|
|
|
assert_plane_enabled(dev_priv, crtc->plane);
|
|
if (IS_BROADWELL(dev)) {
|
|
mutex_lock(&dev_priv->rps.hw_lock);
|
|
WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0));
|
|
mutex_unlock(&dev_priv->rps.hw_lock);
|
|
/* wait for pcode to finish disabling IPS, which may take up to 42ms */
|
|
if (wait_for((I915_READ(IPS_CTL) & IPS_ENABLE) == 0, 42))
|
|
DRM_ERROR("Timed out waiting for IPS disable\n");
|
|
} else {
|
|
I915_WRITE(IPS_CTL, 0);
|
|
POSTING_READ(IPS_CTL);
|
|
}
|
|
|
|
/* We need to wait for a vblank before we can disable the plane. */
|
|
intel_wait_for_vblank(dev, crtc->pipe);
|
|
}
|
|
|
|
/** Loads the palette/gamma unit for the CRTC with the prepared values */
|
|
static void intel_crtc_load_lut(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
enum pipe pipe = intel_crtc->pipe;
|
|
int i;
|
|
bool reenable_ips = false;
|
|
|
|
/* The clocks have to be on to load the palette. */
|
|
if (!crtc->state->active)
|
|
return;
|
|
|
|
if (HAS_GMCH_DISPLAY(dev_priv->dev)) {
|
|
if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DSI))
|
|
assert_dsi_pll_enabled(dev_priv);
|
|
else
|
|
assert_pll_enabled(dev_priv, pipe);
|
|
}
|
|
|
|
/* Workaround : Do not read or write the pipe palette/gamma data while
|
|
* GAMMA_MODE is configured for split gamma and IPS_CTL has IPS enabled.
|
|
*/
|
|
if (IS_HASWELL(dev) && intel_crtc->config->ips_enabled &&
|
|
((I915_READ(GAMMA_MODE(pipe)) & GAMMA_MODE_MODE_MASK) ==
|
|
GAMMA_MODE_MODE_SPLIT)) {
|
|
hsw_disable_ips(intel_crtc);
|
|
reenable_ips = true;
|
|
}
|
|
|
|
for (i = 0; i < 256; i++) {
|
|
i915_reg_t palreg;
|
|
|
|
if (HAS_GMCH_DISPLAY(dev))
|
|
palreg = PALETTE(pipe, i);
|
|
else
|
|
palreg = LGC_PALETTE(pipe, i);
|
|
|
|
I915_WRITE(palreg,
|
|
(intel_crtc->lut_r[i] << 16) |
|
|
(intel_crtc->lut_g[i] << 8) |
|
|
intel_crtc->lut_b[i]);
|
|
}
|
|
|
|
if (reenable_ips)
|
|
hsw_enable_ips(intel_crtc);
|
|
}
|
|
|
|
static void intel_crtc_dpms_overlay_disable(struct intel_crtc *intel_crtc)
|
|
{
|
|
if (intel_crtc->overlay) {
|
|
struct drm_device *dev = intel_crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
dev_priv->mm.interruptible = false;
|
|
(void) intel_overlay_switch_off(intel_crtc->overlay);
|
|
dev_priv->mm.interruptible = true;
|
|
mutex_unlock(&dev->struct_mutex);
|
|
}
|
|
|
|
/* Let userspace switch the overlay on again. In most cases userspace
|
|
* has to recompute where to put it anyway.
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* intel_post_enable_primary - Perform operations after enabling primary plane
|
|
* @crtc: the CRTC whose primary plane was just enabled
|
|
*
|
|
* Performs potentially sleeping operations that must be done after the primary
|
|
* plane is enabled, such as updating FBC and IPS. Note that this may be
|
|
* called due to an explicit primary plane update, or due to an implicit
|
|
* re-enable that is caused when a sprite plane is updated to no longer
|
|
* completely hide the primary plane.
|
|
*/
|
|
static void
|
|
intel_post_enable_primary(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
|
|
/*
|
|
* BDW signals flip done immediately if the plane
|
|
* is disabled, even if the plane enable is already
|
|
* armed to occur at the next vblank :(
|
|
*/
|
|
if (IS_BROADWELL(dev))
|
|
intel_wait_for_vblank(dev, pipe);
|
|
|
|
/*
|
|
* FIXME IPS should be fine as long as one plane is
|
|
* enabled, but in practice it seems to have problems
|
|
* when going from primary only to sprite only and vice
|
|
* versa.
|
|
*/
|
|
hsw_enable_ips(intel_crtc);
|
|
|
|
/*
|
|
* Gen2 reports pipe underruns whenever all planes are disabled.
|
|
* So don't enable underrun reporting before at least some planes
|
|
* are enabled.
|
|
* FIXME: Need to fix the logic to work when we turn off all planes
|
|
* but leave the pipe running.
|
|
*/
|
|
if (IS_GEN2(dev))
|
|
intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
|
|
|
|
/* Underruns don't always raise interrupts, so check manually. */
|
|
intel_check_cpu_fifo_underruns(dev_priv);
|
|
intel_check_pch_fifo_underruns(dev_priv);
|
|
}
|
|
|
|
/**
|
|
* intel_pre_disable_primary - Perform operations before disabling primary plane
|
|
* @crtc: the CRTC whose primary plane is to be disabled
|
|
*
|
|
* Performs potentially sleeping operations that must be done before the
|
|
* primary plane is disabled, such as updating FBC and IPS. Note that this may
|
|
* be called due to an explicit primary plane update, or due to an implicit
|
|
* disable that is caused when a sprite plane completely hides the primary
|
|
* plane.
|
|
*/
|
|
static void
|
|
intel_pre_disable_primary(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
|
|
/*
|
|
* Gen2 reports pipe underruns whenever all planes are disabled.
|
|
* So diasble underrun reporting before all the planes get disabled.
|
|
* FIXME: Need to fix the logic to work when we turn off all planes
|
|
* but leave the pipe running.
|
|
*/
|
|
if (IS_GEN2(dev))
|
|
intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
|
|
|
|
/*
|
|
* Vblank time updates from the shadow to live plane control register
|
|
* are blocked if the memory self-refresh mode is active at that
|
|
* moment. So to make sure the plane gets truly disabled, disable
|
|
* first the self-refresh mode. The self-refresh enable bit in turn
|
|
* will be checked/applied by the HW only at the next frame start
|
|
* event which is after the vblank start event, so we need to have a
|
|
* wait-for-vblank between disabling the plane and the pipe.
|
|
*/
|
|
if (HAS_GMCH_DISPLAY(dev)) {
|
|
intel_set_memory_cxsr(dev_priv, false);
|
|
dev_priv->wm.vlv.cxsr = false;
|
|
intel_wait_for_vblank(dev, pipe);
|
|
}
|
|
|
|
/*
|
|
* FIXME IPS should be fine as long as one plane is
|
|
* enabled, but in practice it seems to have problems
|
|
* when going from primary only to sprite only and vice
|
|
* versa.
|
|
*/
|
|
hsw_disable_ips(intel_crtc);
|
|
}
|
|
|
|
static void intel_post_plane_update(struct intel_crtc *crtc)
|
|
{
|
|
struct intel_crtc_atomic_commit *atomic = &crtc->atomic;
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (atomic->wait_vblank)
|
|
intel_wait_for_vblank(dev, crtc->pipe);
|
|
|
|
intel_frontbuffer_flip(dev, atomic->fb_bits);
|
|
|
|
if (atomic->disable_cxsr)
|
|
crtc->wm.cxsr_allowed = true;
|
|
|
|
if (crtc->atomic.update_wm_post)
|
|
intel_update_watermarks(&crtc->base);
|
|
|
|
if (atomic->update_fbc)
|
|
intel_fbc_update(dev_priv);
|
|
|
|
if (atomic->post_enable_primary)
|
|
intel_post_enable_primary(&crtc->base);
|
|
|
|
memset(atomic, 0, sizeof(*atomic));
|
|
}
|
|
|
|
static void intel_pre_plane_update(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc_atomic_commit *atomic = &crtc->atomic;
|
|
|
|
if (atomic->disable_fbc)
|
|
intel_fbc_disable_crtc(crtc);
|
|
|
|
if (crtc->atomic.disable_ips)
|
|
hsw_disable_ips(crtc);
|
|
|
|
if (atomic->pre_disable_primary)
|
|
intel_pre_disable_primary(&crtc->base);
|
|
|
|
if (atomic->disable_cxsr) {
|
|
crtc->wm.cxsr_allowed = false;
|
|
intel_set_memory_cxsr(dev_priv, false);
|
|
}
|
|
}
|
|
|
|
static void intel_crtc_disable_planes(struct drm_crtc *crtc, unsigned plane_mask)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct drm_plane *p;
|
|
int pipe = intel_crtc->pipe;
|
|
|
|
intel_crtc_dpms_overlay_disable(intel_crtc);
|
|
|
|
drm_for_each_plane_mask(p, dev, plane_mask)
|
|
to_intel_plane(p)->disable_plane(p, crtc);
|
|
|
|
/*
|
|
* FIXME: Once we grow proper nuclear flip support out of this we need
|
|
* to compute the mask of flip planes precisely. For the time being
|
|
* consider this a flip to a NULL plane.
|
|
*/
|
|
intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_ALL_MASK(pipe));
|
|
}
|
|
|
|
static void ironlake_crtc_enable(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct intel_encoder *encoder;
|
|
int pipe = intel_crtc->pipe;
|
|
|
|
if (WARN_ON(intel_crtc->active))
|
|
return;
|
|
|
|
if (intel_crtc->config->has_pch_encoder)
|
|
intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, false);
|
|
|
|
if (intel_crtc->config->has_pch_encoder)
|
|
intel_prepare_shared_dpll(intel_crtc);
|
|
|
|
if (intel_crtc->config->has_dp_encoder)
|
|
intel_dp_set_m_n(intel_crtc, M1_N1);
|
|
|
|
intel_set_pipe_timings(intel_crtc);
|
|
|
|
if (intel_crtc->config->has_pch_encoder) {
|
|
intel_cpu_transcoder_set_m_n(intel_crtc,
|
|
&intel_crtc->config->fdi_m_n, NULL);
|
|
}
|
|
|
|
ironlake_set_pipeconf(crtc);
|
|
|
|
intel_crtc->active = true;
|
|
|
|
intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
|
|
|
|
for_each_encoder_on_crtc(dev, crtc, encoder)
|
|
if (encoder->pre_enable)
|
|
encoder->pre_enable(encoder);
|
|
|
|
if (intel_crtc->config->has_pch_encoder) {
|
|
/* Note: FDI PLL enabling _must_ be done before we enable the
|
|
* cpu pipes, hence this is separate from all the other fdi/pch
|
|
* enabling. */
|
|
ironlake_fdi_pll_enable(intel_crtc);
|
|
} else {
|
|
assert_fdi_tx_disabled(dev_priv, pipe);
|
|
assert_fdi_rx_disabled(dev_priv, pipe);
|
|
}
|
|
|
|
ironlake_pfit_enable(intel_crtc);
|
|
|
|
/*
|
|
* On ILK+ LUT must be loaded before the pipe is running but with
|
|
* clocks enabled
|
|
*/
|
|
intel_crtc_load_lut(crtc);
|
|
|
|
intel_update_watermarks(crtc);
|
|
intel_enable_pipe(intel_crtc);
|
|
|
|
if (intel_crtc->config->has_pch_encoder)
|
|
ironlake_pch_enable(crtc);
|
|
|
|
assert_vblank_disabled(crtc);
|
|
drm_crtc_vblank_on(crtc);
|
|
|
|
for_each_encoder_on_crtc(dev, crtc, encoder)
|
|
encoder->enable(encoder);
|
|
|
|
if (HAS_PCH_CPT(dev))
|
|
cpt_verify_modeset(dev, intel_crtc->pipe);
|
|
|
|
/* Must wait for vblank to avoid spurious PCH FIFO underruns */
|
|
if (intel_crtc->config->has_pch_encoder)
|
|
intel_wait_for_vblank(dev, pipe);
|
|
intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, true);
|
|
}
|
|
|
|
/* IPS only exists on ULT machines and is tied to pipe A. */
|
|
static bool hsw_crtc_supports_ips(struct intel_crtc *crtc)
|
|
{
|
|
return HAS_IPS(crtc->base.dev) && crtc->pipe == PIPE_A;
|
|
}
|
|
|
|
static void haswell_crtc_enable(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct intel_encoder *encoder;
|
|
int pipe = intel_crtc->pipe, hsw_workaround_pipe;
|
|
struct intel_crtc_state *pipe_config =
|
|
to_intel_crtc_state(crtc->state);
|
|
bool is_dsi = intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DSI);
|
|
|
|
if (WARN_ON(intel_crtc->active))
|
|
return;
|
|
|
|
if (intel_crtc->config->has_pch_encoder)
|
|
intel_set_pch_fifo_underrun_reporting(dev_priv, TRANSCODER_A,
|
|
false);
|
|
|
|
if (intel_crtc_to_shared_dpll(intel_crtc))
|
|
intel_enable_shared_dpll(intel_crtc);
|
|
|
|
if (intel_crtc->config->has_dp_encoder)
|
|
intel_dp_set_m_n(intel_crtc, M1_N1);
|
|
|
|
intel_set_pipe_timings(intel_crtc);
|
|
|
|
if (intel_crtc->config->cpu_transcoder != TRANSCODER_EDP) {
|
|
I915_WRITE(PIPE_MULT(intel_crtc->config->cpu_transcoder),
|
|
intel_crtc->config->pixel_multiplier - 1);
|
|
}
|
|
|
|
if (intel_crtc->config->has_pch_encoder) {
|
|
intel_cpu_transcoder_set_m_n(intel_crtc,
|
|
&intel_crtc->config->fdi_m_n, NULL);
|
|
}
|
|
|
|
haswell_set_pipeconf(crtc);
|
|
|
|
intel_set_pipe_csc(crtc);
|
|
|
|
intel_crtc->active = true;
|
|
|
|
intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
|
|
for_each_encoder_on_crtc(dev, crtc, encoder) {
|
|
if (encoder->pre_pll_enable)
|
|
encoder->pre_pll_enable(encoder);
|
|
if (encoder->pre_enable)
|
|
encoder->pre_enable(encoder);
|
|
}
|
|
|
|
if (intel_crtc->config->has_pch_encoder)
|
|
dev_priv->display.fdi_link_train(crtc);
|
|
|
|
if (!is_dsi)
|
|
intel_ddi_enable_pipe_clock(intel_crtc);
|
|
|
|
if (INTEL_INFO(dev)->gen >= 9)
|
|
skylake_pfit_enable(intel_crtc);
|
|
else
|
|
ironlake_pfit_enable(intel_crtc);
|
|
|
|
/*
|
|
* On ILK+ LUT must be loaded before the pipe is running but with
|
|
* clocks enabled
|
|
*/
|
|
intel_crtc_load_lut(crtc);
|
|
|
|
intel_ddi_set_pipe_settings(crtc);
|
|
if (!is_dsi)
|
|
intel_ddi_enable_transcoder_func(crtc);
|
|
|
|
intel_update_watermarks(crtc);
|
|
intel_enable_pipe(intel_crtc);
|
|
|
|
if (intel_crtc->config->has_pch_encoder)
|
|
lpt_pch_enable(crtc);
|
|
|
|
if (intel_crtc->config->dp_encoder_is_mst && !is_dsi)
|
|
intel_ddi_set_vc_payload_alloc(crtc, true);
|
|
|
|
assert_vblank_disabled(crtc);
|
|
drm_crtc_vblank_on(crtc);
|
|
|
|
for_each_encoder_on_crtc(dev, crtc, encoder) {
|
|
encoder->enable(encoder);
|
|
intel_opregion_notify_encoder(encoder, true);
|
|
}
|
|
|
|
if (intel_crtc->config->has_pch_encoder)
|
|
intel_set_pch_fifo_underrun_reporting(dev_priv, TRANSCODER_A,
|
|
true);
|
|
|
|
/* If we change the relative order between pipe/planes enabling, we need
|
|
* to change the workaround. */
|
|
hsw_workaround_pipe = pipe_config->hsw_workaround_pipe;
|
|
if (IS_HASWELL(dev) && hsw_workaround_pipe != INVALID_PIPE) {
|
|
intel_wait_for_vblank(dev, hsw_workaround_pipe);
|
|
intel_wait_for_vblank(dev, hsw_workaround_pipe);
|
|
}
|
|
}
|
|
|
|
static void ironlake_pfit_disable(struct intel_crtc *crtc, bool force)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int pipe = crtc->pipe;
|
|
|
|
/* To avoid upsetting the power well on haswell only disable the pfit if
|
|
* it's in use. The hw state code will make sure we get this right. */
|
|
if (force || crtc->config->pch_pfit.enabled) {
|
|
I915_WRITE(PF_CTL(pipe), 0);
|
|
I915_WRITE(PF_WIN_POS(pipe), 0);
|
|
I915_WRITE(PF_WIN_SZ(pipe), 0);
|
|
}
|
|
}
|
|
|
|
static void ironlake_crtc_disable(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct intel_encoder *encoder;
|
|
int pipe = intel_crtc->pipe;
|
|
|
|
if (intel_crtc->config->has_pch_encoder)
|
|
intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, false);
|
|
|
|
for_each_encoder_on_crtc(dev, crtc, encoder)
|
|
encoder->disable(encoder);
|
|
|
|
drm_crtc_vblank_off(crtc);
|
|
assert_vblank_disabled(crtc);
|
|
|
|
intel_disable_pipe(intel_crtc);
|
|
|
|
ironlake_pfit_disable(intel_crtc, false);
|
|
|
|
if (intel_crtc->config->has_pch_encoder)
|
|
ironlake_fdi_disable(crtc);
|
|
|
|
for_each_encoder_on_crtc(dev, crtc, encoder)
|
|
if (encoder->post_disable)
|
|
encoder->post_disable(encoder);
|
|
|
|
if (intel_crtc->config->has_pch_encoder) {
|
|
ironlake_disable_pch_transcoder(dev_priv, pipe);
|
|
|
|
if (HAS_PCH_CPT(dev)) {
|
|
i915_reg_t reg;
|
|
u32 temp;
|
|
|
|
/* disable TRANS_DP_CTL */
|
|
reg = TRANS_DP_CTL(pipe);
|
|
temp = I915_READ(reg);
|
|
temp &= ~(TRANS_DP_OUTPUT_ENABLE |
|
|
TRANS_DP_PORT_SEL_MASK);
|
|
temp |= TRANS_DP_PORT_SEL_NONE;
|
|
I915_WRITE(reg, temp);
|
|
|
|
/* disable DPLL_SEL */
|
|
temp = I915_READ(PCH_DPLL_SEL);
|
|
temp &= ~(TRANS_DPLL_ENABLE(pipe) | TRANS_DPLLB_SEL(pipe));
|
|
I915_WRITE(PCH_DPLL_SEL, temp);
|
|
}
|
|
|
|
ironlake_fdi_pll_disable(intel_crtc);
|
|
}
|
|
|
|
intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, true);
|
|
}
|
|
|
|
static void haswell_crtc_disable(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct intel_encoder *encoder;
|
|
enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
|
|
bool is_dsi = intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DSI);
|
|
|
|
if (intel_crtc->config->has_pch_encoder)
|
|
intel_set_pch_fifo_underrun_reporting(dev_priv, TRANSCODER_A,
|
|
false);
|
|
|
|
for_each_encoder_on_crtc(dev, crtc, encoder) {
|
|
intel_opregion_notify_encoder(encoder, false);
|
|
encoder->disable(encoder);
|
|
}
|
|
|
|
drm_crtc_vblank_off(crtc);
|
|
assert_vblank_disabled(crtc);
|
|
|
|
intel_disable_pipe(intel_crtc);
|
|
|
|
if (intel_crtc->config->dp_encoder_is_mst)
|
|
intel_ddi_set_vc_payload_alloc(crtc, false);
|
|
|
|
if (!is_dsi)
|
|
intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder);
|
|
|
|
if (INTEL_INFO(dev)->gen >= 9)
|
|
skylake_scaler_disable(intel_crtc);
|
|
else
|
|
ironlake_pfit_disable(intel_crtc, false);
|
|
|
|
if (!is_dsi)
|
|
intel_ddi_disable_pipe_clock(intel_crtc);
|
|
|
|
if (intel_crtc->config->has_pch_encoder) {
|
|
lpt_disable_pch_transcoder(dev_priv);
|
|
intel_ddi_fdi_disable(crtc);
|
|
}
|
|
|
|
for_each_encoder_on_crtc(dev, crtc, encoder)
|
|
if (encoder->post_disable)
|
|
encoder->post_disable(encoder);
|
|
|
|
if (intel_crtc->config->has_pch_encoder)
|
|
intel_set_pch_fifo_underrun_reporting(dev_priv, TRANSCODER_A,
|
|
true);
|
|
}
|
|
|
|
static void i9xx_pfit_enable(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc_state *pipe_config = crtc->config;
|
|
|
|
if (!pipe_config->gmch_pfit.control)
|
|
return;
|
|
|
|
/*
|
|
* The panel fitter should only be adjusted whilst the pipe is disabled,
|
|
* according to register description and PRM.
|
|
*/
|
|
WARN_ON(I915_READ(PFIT_CONTROL) & PFIT_ENABLE);
|
|
assert_pipe_disabled(dev_priv, crtc->pipe);
|
|
|
|
I915_WRITE(PFIT_PGM_RATIOS, pipe_config->gmch_pfit.pgm_ratios);
|
|
I915_WRITE(PFIT_CONTROL, pipe_config->gmch_pfit.control);
|
|
|
|
/* Border color in case we don't scale up to the full screen. Black by
|
|
* default, change to something else for debugging. */
|
|
I915_WRITE(BCLRPAT(crtc->pipe), 0);
|
|
}
|
|
|
|
static enum intel_display_power_domain port_to_power_domain(enum port port)
|
|
{
|
|
switch (port) {
|
|
case PORT_A:
|
|
return POWER_DOMAIN_PORT_DDI_A_LANES;
|
|
case PORT_B:
|
|
return POWER_DOMAIN_PORT_DDI_B_LANES;
|
|
case PORT_C:
|
|
return POWER_DOMAIN_PORT_DDI_C_LANES;
|
|
case PORT_D:
|
|
return POWER_DOMAIN_PORT_DDI_D_LANES;
|
|
case PORT_E:
|
|
return POWER_DOMAIN_PORT_DDI_E_LANES;
|
|
default:
|
|
WARN_ON_ONCE(1);
|
|
return POWER_DOMAIN_PORT_OTHER;
|
|
}
|
|
}
|
|
|
|
static enum intel_display_power_domain port_to_aux_power_domain(enum port port)
|
|
{
|
|
switch (port) {
|
|
case PORT_A:
|
|
return POWER_DOMAIN_AUX_A;
|
|
case PORT_B:
|
|
return POWER_DOMAIN_AUX_B;
|
|
case PORT_C:
|
|
return POWER_DOMAIN_AUX_C;
|
|
case PORT_D:
|
|
return POWER_DOMAIN_AUX_D;
|
|
case PORT_E:
|
|
/* FIXME: Check VBT for actual wiring of PORT E */
|
|
return POWER_DOMAIN_AUX_D;
|
|
default:
|
|
WARN_ON_ONCE(1);
|
|
return POWER_DOMAIN_AUX_A;
|
|
}
|
|
}
|
|
|
|
#define for_each_power_domain(domain, mask) \
|
|
for ((domain) = 0; (domain) < POWER_DOMAIN_NUM; (domain)++) \
|
|
if ((1 << (domain)) & (mask))
|
|
|
|
enum intel_display_power_domain
|
|
intel_display_port_power_domain(struct intel_encoder *intel_encoder)
|
|
{
|
|
struct drm_device *dev = intel_encoder->base.dev;
|
|
struct intel_digital_port *intel_dig_port;
|
|
|
|
switch (intel_encoder->type) {
|
|
case INTEL_OUTPUT_UNKNOWN:
|
|
/* Only DDI platforms should ever use this output type */
|
|
WARN_ON_ONCE(!HAS_DDI(dev));
|
|
case INTEL_OUTPUT_DISPLAYPORT:
|
|
case INTEL_OUTPUT_HDMI:
|
|
case INTEL_OUTPUT_EDP:
|
|
intel_dig_port = enc_to_dig_port(&intel_encoder->base);
|
|
return port_to_power_domain(intel_dig_port->port);
|
|
case INTEL_OUTPUT_DP_MST:
|
|
intel_dig_port = enc_to_mst(&intel_encoder->base)->primary;
|
|
return port_to_power_domain(intel_dig_port->port);
|
|
case INTEL_OUTPUT_ANALOG:
|
|
return POWER_DOMAIN_PORT_CRT;
|
|
case INTEL_OUTPUT_DSI:
|
|
return POWER_DOMAIN_PORT_DSI;
|
|
default:
|
|
return POWER_DOMAIN_PORT_OTHER;
|
|
}
|
|
}
|
|
|
|
enum intel_display_power_domain
|
|
intel_display_port_aux_power_domain(struct intel_encoder *intel_encoder)
|
|
{
|
|
struct drm_device *dev = intel_encoder->base.dev;
|
|
struct intel_digital_port *intel_dig_port;
|
|
|
|
switch (intel_encoder->type) {
|
|
case INTEL_OUTPUT_UNKNOWN:
|
|
/* Only DDI platforms should ever use this output type */
|
|
WARN_ON_ONCE(!HAS_DDI(dev));
|
|
case INTEL_OUTPUT_DISPLAYPORT:
|
|
case INTEL_OUTPUT_EDP:
|
|
intel_dig_port = enc_to_dig_port(&intel_encoder->base);
|
|
return port_to_aux_power_domain(intel_dig_port->port);
|
|
case INTEL_OUTPUT_DP_MST:
|
|
intel_dig_port = enc_to_mst(&intel_encoder->base)->primary;
|
|
return port_to_aux_power_domain(intel_dig_port->port);
|
|
default:
|
|
WARN_ON_ONCE(1);
|
|
return POWER_DOMAIN_AUX_A;
|
|
}
|
|
}
|
|
|
|
static unsigned long get_crtc_power_domains(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct intel_encoder *intel_encoder;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
enum pipe pipe = intel_crtc->pipe;
|
|
unsigned long mask;
|
|
enum transcoder transcoder = intel_crtc->config->cpu_transcoder;
|
|
|
|
if (!crtc->state->active)
|
|
return 0;
|
|
|
|
mask = BIT(POWER_DOMAIN_PIPE(pipe));
|
|
mask |= BIT(POWER_DOMAIN_TRANSCODER(transcoder));
|
|
if (intel_crtc->config->pch_pfit.enabled ||
|
|
intel_crtc->config->pch_pfit.force_thru)
|
|
mask |= BIT(POWER_DOMAIN_PIPE_PANEL_FITTER(pipe));
|
|
|
|
for_each_encoder_on_crtc(dev, crtc, intel_encoder)
|
|
mask |= BIT(intel_display_port_power_domain(intel_encoder));
|
|
|
|
return mask;
|
|
}
|
|
|
|
static unsigned long modeset_get_crtc_power_domains(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_i915_private *dev_priv = crtc->dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
enum intel_display_power_domain domain;
|
|
unsigned long domains, new_domains, old_domains;
|
|
|
|
old_domains = intel_crtc->enabled_power_domains;
|
|
intel_crtc->enabled_power_domains = new_domains = get_crtc_power_domains(crtc);
|
|
|
|
domains = new_domains & ~old_domains;
|
|
|
|
for_each_power_domain(domain, domains)
|
|
intel_display_power_get(dev_priv, domain);
|
|
|
|
return old_domains & ~new_domains;
|
|
}
|
|
|
|
static void modeset_put_power_domains(struct drm_i915_private *dev_priv,
|
|
unsigned long domains)
|
|
{
|
|
enum intel_display_power_domain domain;
|
|
|
|
for_each_power_domain(domain, domains)
|
|
intel_display_power_put(dev_priv, domain);
|
|
}
|
|
|
|
static void modeset_update_crtc_power_domains(struct drm_atomic_state *state)
|
|
{
|
|
struct drm_device *dev = state->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
unsigned long put_domains[I915_MAX_PIPES] = {};
|
|
struct drm_crtc_state *crtc_state;
|
|
struct drm_crtc *crtc;
|
|
int i;
|
|
|
|
for_each_crtc_in_state(state, crtc, crtc_state, i) {
|
|
if (needs_modeset(crtc->state))
|
|
put_domains[to_intel_crtc(crtc)->pipe] =
|
|
modeset_get_crtc_power_domains(crtc);
|
|
}
|
|
|
|
if (dev_priv->display.modeset_commit_cdclk) {
|
|
unsigned int cdclk = to_intel_atomic_state(state)->cdclk;
|
|
|
|
if (cdclk != dev_priv->cdclk_freq &&
|
|
!WARN_ON(!state->allow_modeset))
|
|
dev_priv->display.modeset_commit_cdclk(state);
|
|
}
|
|
|
|
for (i = 0; i < I915_MAX_PIPES; i++)
|
|
if (put_domains[i])
|
|
modeset_put_power_domains(dev_priv, put_domains[i]);
|
|
}
|
|
|
|
static int intel_compute_max_dotclk(struct drm_i915_private *dev_priv)
|
|
{
|
|
int max_cdclk_freq = dev_priv->max_cdclk_freq;
|
|
|
|
if (INTEL_INFO(dev_priv)->gen >= 9 ||
|
|
IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
|
|
return max_cdclk_freq;
|
|
else if (IS_CHERRYVIEW(dev_priv))
|
|
return max_cdclk_freq*95/100;
|
|
else if (INTEL_INFO(dev_priv)->gen < 4)
|
|
return 2*max_cdclk_freq*90/100;
|
|
else
|
|
return max_cdclk_freq*90/100;
|
|
}
|
|
|
|
static void intel_update_max_cdclk(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
|
|
u32 limit = I915_READ(SKL_DFSM) & SKL_DFSM_CDCLK_LIMIT_MASK;
|
|
|
|
if (limit == SKL_DFSM_CDCLK_LIMIT_675)
|
|
dev_priv->max_cdclk_freq = 675000;
|
|
else if (limit == SKL_DFSM_CDCLK_LIMIT_540)
|
|
dev_priv->max_cdclk_freq = 540000;
|
|
else if (limit == SKL_DFSM_CDCLK_LIMIT_450)
|
|
dev_priv->max_cdclk_freq = 450000;
|
|
else
|
|
dev_priv->max_cdclk_freq = 337500;
|
|
} else if (IS_BROADWELL(dev)) {
|
|
/*
|
|
* FIXME with extra cooling we can allow
|
|
* 540 MHz for ULX and 675 Mhz for ULT.
|
|
* How can we know if extra cooling is
|
|
* available? PCI ID, VTB, something else?
|
|
*/
|
|
if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
|
|
dev_priv->max_cdclk_freq = 450000;
|
|
else if (IS_BDW_ULX(dev))
|
|
dev_priv->max_cdclk_freq = 450000;
|
|
else if (IS_BDW_ULT(dev))
|
|
dev_priv->max_cdclk_freq = 540000;
|
|
else
|
|
dev_priv->max_cdclk_freq = 675000;
|
|
} else if (IS_CHERRYVIEW(dev)) {
|
|
dev_priv->max_cdclk_freq = 320000;
|
|
} else if (IS_VALLEYVIEW(dev)) {
|
|
dev_priv->max_cdclk_freq = 400000;
|
|
} else {
|
|
/* otherwise assume cdclk is fixed */
|
|
dev_priv->max_cdclk_freq = dev_priv->cdclk_freq;
|
|
}
|
|
|
|
dev_priv->max_dotclk_freq = intel_compute_max_dotclk(dev_priv);
|
|
|
|
DRM_DEBUG_DRIVER("Max CD clock rate: %d kHz\n",
|
|
dev_priv->max_cdclk_freq);
|
|
|
|
DRM_DEBUG_DRIVER("Max dotclock rate: %d kHz\n",
|
|
dev_priv->max_dotclk_freq);
|
|
}
|
|
|
|
static void intel_update_cdclk(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
dev_priv->cdclk_freq = dev_priv->display.get_display_clock_speed(dev);
|
|
DRM_DEBUG_DRIVER("Current CD clock rate: %d kHz\n",
|
|
dev_priv->cdclk_freq);
|
|
|
|
/*
|
|
* Program the gmbus_freq based on the cdclk frequency.
|
|
* BSpec erroneously claims we should aim for 4MHz, but
|
|
* in fact 1MHz is the correct frequency.
|
|
*/
|
|
if (IS_VALLEYVIEW(dev)) {
|
|
/*
|
|
* Program the gmbus_freq based on the cdclk frequency.
|
|
* BSpec erroneously claims we should aim for 4MHz, but
|
|
* in fact 1MHz is the correct frequency.
|
|
*/
|
|
I915_WRITE(GMBUSFREQ_VLV, DIV_ROUND_UP(dev_priv->cdclk_freq, 1000));
|
|
}
|
|
|
|
if (dev_priv->max_cdclk_freq == 0)
|
|
intel_update_max_cdclk(dev);
|
|
}
|
|
|
|
static void broxton_set_cdclk(struct drm_device *dev, int frequency)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t divider;
|
|
uint32_t ratio;
|
|
uint32_t current_freq;
|
|
int ret;
|
|
|
|
/* frequency = 19.2MHz * ratio / 2 / div{1,1.5,2,4} */
|
|
switch (frequency) {
|
|
case 144000:
|
|
divider = BXT_CDCLK_CD2X_DIV_SEL_4;
|
|
ratio = BXT_DE_PLL_RATIO(60);
|
|
break;
|
|
case 288000:
|
|
divider = BXT_CDCLK_CD2X_DIV_SEL_2;
|
|
ratio = BXT_DE_PLL_RATIO(60);
|
|
break;
|
|
case 384000:
|
|
divider = BXT_CDCLK_CD2X_DIV_SEL_1_5;
|
|
ratio = BXT_DE_PLL_RATIO(60);
|
|
break;
|
|
case 576000:
|
|
divider = BXT_CDCLK_CD2X_DIV_SEL_1;
|
|
ratio = BXT_DE_PLL_RATIO(60);
|
|
break;
|
|
case 624000:
|
|
divider = BXT_CDCLK_CD2X_DIV_SEL_1;
|
|
ratio = BXT_DE_PLL_RATIO(65);
|
|
break;
|
|
case 19200:
|
|
/*
|
|
* Bypass frequency with DE PLL disabled. Init ratio, divider
|
|
* to suppress GCC warning.
|
|
*/
|
|
ratio = 0;
|
|
divider = 0;
|
|
break;
|
|
default:
|
|
DRM_ERROR("unsupported CDCLK freq %d", frequency);
|
|
|
|
return;
|
|
}
|
|
|
|
mutex_lock(&dev_priv->rps.hw_lock);
|
|
/* Inform power controller of upcoming frequency change */
|
|
ret = sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ,
|
|
0x80000000);
|
|
mutex_unlock(&dev_priv->rps.hw_lock);
|
|
|
|
if (ret) {
|
|
DRM_ERROR("PCode CDCLK freq change notify failed (err %d, freq %d)\n",
|
|
ret, frequency);
|
|
return;
|
|
}
|
|
|
|
current_freq = I915_READ(CDCLK_CTL) & CDCLK_FREQ_DECIMAL_MASK;
|
|
/* convert from .1 fixpoint MHz with -1MHz offset to kHz */
|
|
current_freq = current_freq * 500 + 1000;
|
|
|
|
/*
|
|
* DE PLL has to be disabled when
|
|
* - setting to 19.2MHz (bypass, PLL isn't used)
|
|
* - before setting to 624MHz (PLL needs toggling)
|
|
* - before setting to any frequency from 624MHz (PLL needs toggling)
|
|
*/
|
|
if (frequency == 19200 || frequency == 624000 ||
|
|
current_freq == 624000) {
|
|
I915_WRITE(BXT_DE_PLL_ENABLE, ~BXT_DE_PLL_PLL_ENABLE);
|
|
/* Timeout 200us */
|
|
if (wait_for(!(I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK),
|
|
1))
|
|
DRM_ERROR("timout waiting for DE PLL unlock\n");
|
|
}
|
|
|
|
if (frequency != 19200) {
|
|
uint32_t val;
|
|
|
|
val = I915_READ(BXT_DE_PLL_CTL);
|
|
val &= ~BXT_DE_PLL_RATIO_MASK;
|
|
val |= ratio;
|
|
I915_WRITE(BXT_DE_PLL_CTL, val);
|
|
|
|
I915_WRITE(BXT_DE_PLL_ENABLE, BXT_DE_PLL_PLL_ENABLE);
|
|
/* Timeout 200us */
|
|
if (wait_for(I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK, 1))
|
|
DRM_ERROR("timeout waiting for DE PLL lock\n");
|
|
|
|
val = I915_READ(CDCLK_CTL);
|
|
val &= ~BXT_CDCLK_CD2X_DIV_SEL_MASK;
|
|
val |= divider;
|
|
/*
|
|
* Disable SSA Precharge when CD clock frequency < 500 MHz,
|
|
* enable otherwise.
|
|
*/
|
|
val &= ~BXT_CDCLK_SSA_PRECHARGE_ENABLE;
|
|
if (frequency >= 500000)
|
|
val |= BXT_CDCLK_SSA_PRECHARGE_ENABLE;
|
|
|
|
val &= ~CDCLK_FREQ_DECIMAL_MASK;
|
|
/* convert from kHz to .1 fixpoint MHz with -1MHz offset */
|
|
val |= (frequency - 1000) / 500;
|
|
I915_WRITE(CDCLK_CTL, val);
|
|
}
|
|
|
|
mutex_lock(&dev_priv->rps.hw_lock);
|
|
ret = sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ,
|
|
DIV_ROUND_UP(frequency, 25000));
|
|
mutex_unlock(&dev_priv->rps.hw_lock);
|
|
|
|
if (ret) {
|
|
DRM_ERROR("PCode CDCLK freq set failed, (err %d, freq %d)\n",
|
|
ret, frequency);
|
|
return;
|
|
}
|
|
|
|
intel_update_cdclk(dev);
|
|
}
|
|
|
|
void broxton_init_cdclk(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t val;
|
|
|
|
/*
|
|
* NDE_RSTWRN_OPT RST PCH Handshake En must always be 0b on BXT
|
|
* or else the reset will hang because there is no PCH to respond.
|
|
* Move the handshake programming to initialization sequence.
|
|
* Previously was left up to BIOS.
|
|
*/
|
|
val = I915_READ(HSW_NDE_RSTWRN_OPT);
|
|
val &= ~RESET_PCH_HANDSHAKE_ENABLE;
|
|
I915_WRITE(HSW_NDE_RSTWRN_OPT, val);
|
|
|
|
/* Enable PG1 for cdclk */
|
|
intel_display_power_get(dev_priv, POWER_DOMAIN_PLLS);
|
|
|
|
/* check if cd clock is enabled */
|
|
if (I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_PLL_ENABLE) {
|
|
DRM_DEBUG_KMS("Display already initialized\n");
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* FIXME:
|
|
* - The initial CDCLK needs to be read from VBT.
|
|
* Need to make this change after VBT has changes for BXT.
|
|
* - check if setting the max (or any) cdclk freq is really necessary
|
|
* here, it belongs to modeset time
|
|
*/
|
|
broxton_set_cdclk(dev, 624000);
|
|
|
|
I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) | DBUF_POWER_REQUEST);
|
|
POSTING_READ(DBUF_CTL);
|
|
|
|
udelay(10);
|
|
|
|
if (!(I915_READ(DBUF_CTL) & DBUF_POWER_STATE))
|
|
DRM_ERROR("DBuf power enable timeout!\n");
|
|
}
|
|
|
|
void broxton_uninit_cdclk(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) & ~DBUF_POWER_REQUEST);
|
|
POSTING_READ(DBUF_CTL);
|
|
|
|
udelay(10);
|
|
|
|
if (I915_READ(DBUF_CTL) & DBUF_POWER_STATE)
|
|
DRM_ERROR("DBuf power disable timeout!\n");
|
|
|
|
/* Set minimum (bypass) frequency, in effect turning off the DE PLL */
|
|
broxton_set_cdclk(dev, 19200);
|
|
|
|
intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS);
|
|
}
|
|
|
|
static const struct skl_cdclk_entry {
|
|
unsigned int freq;
|
|
unsigned int vco;
|
|
} skl_cdclk_frequencies[] = {
|
|
{ .freq = 308570, .vco = 8640 },
|
|
{ .freq = 337500, .vco = 8100 },
|
|
{ .freq = 432000, .vco = 8640 },
|
|
{ .freq = 450000, .vco = 8100 },
|
|
{ .freq = 540000, .vco = 8100 },
|
|
{ .freq = 617140, .vco = 8640 },
|
|
{ .freq = 675000, .vco = 8100 },
|
|
};
|
|
|
|
static unsigned int skl_cdclk_decimal(unsigned int freq)
|
|
{
|
|
return (freq - 1000) / 500;
|
|
}
|
|
|
|
static unsigned int skl_cdclk_get_vco(unsigned int freq)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(skl_cdclk_frequencies); i++) {
|
|
const struct skl_cdclk_entry *e = &skl_cdclk_frequencies[i];
|
|
|
|
if (e->freq == freq)
|
|
return e->vco;
|
|
}
|
|
|
|
return 8100;
|
|
}
|
|
|
|
static void
|
|
skl_dpll0_enable(struct drm_i915_private *dev_priv, unsigned int required_vco)
|
|
{
|
|
unsigned int min_freq;
|
|
u32 val;
|
|
|
|
/* select the minimum CDCLK before enabling DPLL 0 */
|
|
val = I915_READ(CDCLK_CTL);
|
|
val &= ~CDCLK_FREQ_SEL_MASK | ~CDCLK_FREQ_DECIMAL_MASK;
|
|
val |= CDCLK_FREQ_337_308;
|
|
|
|
if (required_vco == 8640)
|
|
min_freq = 308570;
|
|
else
|
|
min_freq = 337500;
|
|
|
|
val = CDCLK_FREQ_337_308 | skl_cdclk_decimal(min_freq);
|
|
|
|
I915_WRITE(CDCLK_CTL, val);
|
|
POSTING_READ(CDCLK_CTL);
|
|
|
|
/*
|
|
* We always enable DPLL0 with the lowest link rate possible, but still
|
|
* taking into account the VCO required to operate the eDP panel at the
|
|
* desired frequency. The usual DP link rates operate with a VCO of
|
|
* 8100 while the eDP 1.4 alternate link rates need a VCO of 8640.
|
|
* The modeset code is responsible for the selection of the exact link
|
|
* rate later on, with the constraint of choosing a frequency that
|
|
* works with required_vco.
|
|
*/
|
|
val = I915_READ(DPLL_CTRL1);
|
|
|
|
val &= ~(DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) | DPLL_CTRL1_SSC(SKL_DPLL0) |
|
|
DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0));
|
|
val |= DPLL_CTRL1_OVERRIDE(SKL_DPLL0);
|
|
if (required_vco == 8640)
|
|
val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080,
|
|
SKL_DPLL0);
|
|
else
|
|
val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810,
|
|
SKL_DPLL0);
|
|
|
|
I915_WRITE(DPLL_CTRL1, val);
|
|
POSTING_READ(DPLL_CTRL1);
|
|
|
|
I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) | LCPLL_PLL_ENABLE);
|
|
|
|
if (wait_for(I915_READ(LCPLL1_CTL) & LCPLL_PLL_LOCK, 5))
|
|
DRM_ERROR("DPLL0 not locked\n");
|
|
}
|
|
|
|
static bool skl_cdclk_pcu_ready(struct drm_i915_private *dev_priv)
|
|
{
|
|
int ret;
|
|
u32 val;
|
|
|
|
/* inform PCU we want to change CDCLK */
|
|
val = SKL_CDCLK_PREPARE_FOR_CHANGE;
|
|
mutex_lock(&dev_priv->rps.hw_lock);
|
|
ret = sandybridge_pcode_read(dev_priv, SKL_PCODE_CDCLK_CONTROL, &val);
|
|
mutex_unlock(&dev_priv->rps.hw_lock);
|
|
|
|
return ret == 0 && (val & SKL_CDCLK_READY_FOR_CHANGE);
|
|
}
|
|
|
|
static bool skl_cdclk_wait_for_pcu_ready(struct drm_i915_private *dev_priv)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < 15; i++) {
|
|
if (skl_cdclk_pcu_ready(dev_priv))
|
|
return true;
|
|
udelay(10);
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static void skl_set_cdclk(struct drm_i915_private *dev_priv, unsigned int freq)
|
|
{
|
|
struct drm_device *dev = dev_priv->dev;
|
|
u32 freq_select, pcu_ack;
|
|
|
|
DRM_DEBUG_DRIVER("Changing CDCLK to %dKHz\n", freq);
|
|
|
|
if (!skl_cdclk_wait_for_pcu_ready(dev_priv)) {
|
|
DRM_ERROR("failed to inform PCU about cdclk change\n");
|
|
return;
|
|
}
|
|
|
|
/* set CDCLK_CTL */
|
|
switch(freq) {
|
|
case 450000:
|
|
case 432000:
|
|
freq_select = CDCLK_FREQ_450_432;
|
|
pcu_ack = 1;
|
|
break;
|
|
case 540000:
|
|
freq_select = CDCLK_FREQ_540;
|
|
pcu_ack = 2;
|
|
break;
|
|
case 308570:
|
|
case 337500:
|
|
default:
|
|
freq_select = CDCLK_FREQ_337_308;
|
|
pcu_ack = 0;
|
|
break;
|
|
case 617140:
|
|
case 675000:
|
|
freq_select = CDCLK_FREQ_675_617;
|
|
pcu_ack = 3;
|
|
break;
|
|
}
|
|
|
|
I915_WRITE(CDCLK_CTL, freq_select | skl_cdclk_decimal(freq));
|
|
POSTING_READ(CDCLK_CTL);
|
|
|
|
/* inform PCU of the change */
|
|
mutex_lock(&dev_priv->rps.hw_lock);
|
|
sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL, pcu_ack);
|
|
mutex_unlock(&dev_priv->rps.hw_lock);
|
|
|
|
intel_update_cdclk(dev);
|
|
}
|
|
|
|
void skl_uninit_cdclk(struct drm_i915_private *dev_priv)
|
|
{
|
|
/* disable DBUF power */
|
|
I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) & ~DBUF_POWER_REQUEST);
|
|
POSTING_READ(DBUF_CTL);
|
|
|
|
udelay(10);
|
|
|
|
if (I915_READ(DBUF_CTL) & DBUF_POWER_STATE)
|
|
DRM_ERROR("DBuf power disable timeout\n");
|
|
|
|
/* disable DPLL0 */
|
|
I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) & ~LCPLL_PLL_ENABLE);
|
|
if (wait_for(!(I915_READ(LCPLL1_CTL) & LCPLL_PLL_LOCK), 1))
|
|
DRM_ERROR("Couldn't disable DPLL0\n");
|
|
}
|
|
|
|
void skl_init_cdclk(struct drm_i915_private *dev_priv)
|
|
{
|
|
unsigned int required_vco;
|
|
|
|
/* DPLL0 not enabled (happens on early BIOS versions) */
|
|
if (!(I915_READ(LCPLL1_CTL) & LCPLL_PLL_ENABLE)) {
|
|
/* enable DPLL0 */
|
|
required_vco = skl_cdclk_get_vco(dev_priv->skl_boot_cdclk);
|
|
skl_dpll0_enable(dev_priv, required_vco);
|
|
}
|
|
|
|
/* set CDCLK to the frequency the BIOS chose */
|
|
skl_set_cdclk(dev_priv, dev_priv->skl_boot_cdclk);
|
|
|
|
/* enable DBUF power */
|
|
I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) | DBUF_POWER_REQUEST);
|
|
POSTING_READ(DBUF_CTL);
|
|
|
|
udelay(10);
|
|
|
|
if (!(I915_READ(DBUF_CTL) & DBUF_POWER_STATE))
|
|
DRM_ERROR("DBuf power enable timeout\n");
|
|
}
|
|
|
|
int skl_sanitize_cdclk(struct drm_i915_private *dev_priv)
|
|
{
|
|
uint32_t lcpll1 = I915_READ(LCPLL1_CTL);
|
|
uint32_t cdctl = I915_READ(CDCLK_CTL);
|
|
int freq = dev_priv->skl_boot_cdclk;
|
|
|
|
/*
|
|
* check if the pre-os intialized the display
|
|
* There is SWF18 scratchpad register defined which is set by the
|
|
* pre-os which can be used by the OS drivers to check the status
|
|
*/
|
|
if ((I915_READ(SWF_ILK(0x18)) & 0x00FFFFFF) == 0)
|
|
goto sanitize;
|
|
|
|
/* Is PLL enabled and locked ? */
|
|
if (!((lcpll1 & LCPLL_PLL_ENABLE) && (lcpll1 & LCPLL_PLL_LOCK)))
|
|
goto sanitize;
|
|
|
|
/* DPLL okay; verify the cdclock
|
|
*
|
|
* Noticed in some instances that the freq selection is correct but
|
|
* decimal part is programmed wrong from BIOS where pre-os does not
|
|
* enable display. Verify the same as well.
|
|
*/
|
|
if (cdctl == ((cdctl & CDCLK_FREQ_SEL_MASK) | skl_cdclk_decimal(freq)))
|
|
/* All well; nothing to sanitize */
|
|
return false;
|
|
sanitize:
|
|
/*
|
|
* As of now initialize with max cdclk till
|
|
* we get dynamic cdclk support
|
|
* */
|
|
dev_priv->skl_boot_cdclk = dev_priv->max_cdclk_freq;
|
|
skl_init_cdclk(dev_priv);
|
|
|
|
/* we did have to sanitize */
|
|
return true;
|
|
}
|
|
|
|
/* Adjust CDclk dividers to allow high res or save power if possible */
|
|
static void valleyview_set_cdclk(struct drm_device *dev, int cdclk)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 val, cmd;
|
|
|
|
WARN_ON(dev_priv->display.get_display_clock_speed(dev)
|
|
!= dev_priv->cdclk_freq);
|
|
|
|
if (cdclk >= 320000) /* jump to highest voltage for 400MHz too */
|
|
cmd = 2;
|
|
else if (cdclk == 266667)
|
|
cmd = 1;
|
|
else
|
|
cmd = 0;
|
|
|
|
mutex_lock(&dev_priv->rps.hw_lock);
|
|
val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
|
|
val &= ~DSPFREQGUAR_MASK;
|
|
val |= (cmd << DSPFREQGUAR_SHIFT);
|
|
vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val);
|
|
if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) &
|
|
DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT),
|
|
50)) {
|
|
DRM_ERROR("timed out waiting for CDclk change\n");
|
|
}
|
|
mutex_unlock(&dev_priv->rps.hw_lock);
|
|
|
|
mutex_lock(&dev_priv->sb_lock);
|
|
|
|
if (cdclk == 400000) {
|
|
u32 divider;
|
|
|
|
divider = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1;
|
|
|
|
/* adjust cdclk divider */
|
|
val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL);
|
|
val &= ~CCK_FREQUENCY_VALUES;
|
|
val |= divider;
|
|
vlv_cck_write(dev_priv, CCK_DISPLAY_CLOCK_CONTROL, val);
|
|
|
|
if (wait_for((vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL) &
|
|
CCK_FREQUENCY_STATUS) == (divider << CCK_FREQUENCY_STATUS_SHIFT),
|
|
50))
|
|
DRM_ERROR("timed out waiting for CDclk change\n");
|
|
}
|
|
|
|
/* adjust self-refresh exit latency value */
|
|
val = vlv_bunit_read(dev_priv, BUNIT_REG_BISOC);
|
|
val &= ~0x7f;
|
|
|
|
/*
|
|
* For high bandwidth configs, we set a higher latency in the bunit
|
|
* so that the core display fetch happens in time to avoid underruns.
|
|
*/
|
|
if (cdclk == 400000)
|
|
val |= 4500 / 250; /* 4.5 usec */
|
|
else
|
|
val |= 3000 / 250; /* 3.0 usec */
|
|
vlv_bunit_write(dev_priv, BUNIT_REG_BISOC, val);
|
|
|
|
mutex_unlock(&dev_priv->sb_lock);
|
|
|
|
intel_update_cdclk(dev);
|
|
}
|
|
|
|
static void cherryview_set_cdclk(struct drm_device *dev, int cdclk)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 val, cmd;
|
|
|
|
WARN_ON(dev_priv->display.get_display_clock_speed(dev)
|
|
!= dev_priv->cdclk_freq);
|
|
|
|
switch (cdclk) {
|
|
case 333333:
|
|
case 320000:
|
|
case 266667:
|
|
case 200000:
|
|
break;
|
|
default:
|
|
MISSING_CASE(cdclk);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Specs are full of misinformation, but testing on actual
|
|
* hardware has shown that we just need to write the desired
|
|
* CCK divider into the Punit register.
|
|
*/
|
|
cmd = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1;
|
|
|
|
mutex_lock(&dev_priv->rps.hw_lock);
|
|
val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
|
|
val &= ~DSPFREQGUAR_MASK_CHV;
|
|
val |= (cmd << DSPFREQGUAR_SHIFT_CHV);
|
|
vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val);
|
|
if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) &
|
|
DSPFREQSTAT_MASK_CHV) == (cmd << DSPFREQSTAT_SHIFT_CHV),
|
|
50)) {
|
|
DRM_ERROR("timed out waiting for CDclk change\n");
|
|
}
|
|
mutex_unlock(&dev_priv->rps.hw_lock);
|
|
|
|
intel_update_cdclk(dev);
|
|
}
|
|
|
|
static int valleyview_calc_cdclk(struct drm_i915_private *dev_priv,
|
|
int max_pixclk)
|
|
{
|
|
int freq_320 = (dev_priv->hpll_freq << 1) % 320000 != 0 ? 333333 : 320000;
|
|
int limit = IS_CHERRYVIEW(dev_priv) ? 95 : 90;
|
|
|
|
/*
|
|
* Really only a few cases to deal with, as only 4 CDclks are supported:
|
|
* 200MHz
|
|
* 267MHz
|
|
* 320/333MHz (depends on HPLL freq)
|
|
* 400MHz (VLV only)
|
|
* So we check to see whether we're above 90% (VLV) or 95% (CHV)
|
|
* of the lower bin and adjust if needed.
|
|
*
|
|
* We seem to get an unstable or solid color picture at 200MHz.
|
|
* Not sure what's wrong. For now use 200MHz only when all pipes
|
|
* are off.
|
|
*/
|
|
if (!IS_CHERRYVIEW(dev_priv) &&
|
|
max_pixclk > freq_320*limit/100)
|
|
return 400000;
|
|
else if (max_pixclk > 266667*limit/100)
|
|
return freq_320;
|
|
else if (max_pixclk > 0)
|
|
return 266667;
|
|
else
|
|
return 200000;
|
|
}
|
|
|
|
static int broxton_calc_cdclk(struct drm_i915_private *dev_priv,
|
|
int max_pixclk)
|
|
{
|
|
/*
|
|
* FIXME:
|
|
* - remove the guardband, it's not needed on BXT
|
|
* - set 19.2MHz bypass frequency if there are no active pipes
|
|
*/
|
|
if (max_pixclk > 576000*9/10)
|
|
return 624000;
|
|
else if (max_pixclk > 384000*9/10)
|
|
return 576000;
|
|
else if (max_pixclk > 288000*9/10)
|
|
return 384000;
|
|
else if (max_pixclk > 144000*9/10)
|
|
return 288000;
|
|
else
|
|
return 144000;
|
|
}
|
|
|
|
/* Compute the max pixel clock for new configuration. Uses atomic state if
|
|
* that's non-NULL, look at current state otherwise. */
|
|
static int intel_mode_max_pixclk(struct drm_device *dev,
|
|
struct drm_atomic_state *state)
|
|
{
|
|
struct intel_crtc *intel_crtc;
|
|
struct intel_crtc_state *crtc_state;
|
|
int max_pixclk = 0;
|
|
|
|
for_each_intel_crtc(dev, intel_crtc) {
|
|
crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
|
|
if (IS_ERR(crtc_state))
|
|
return PTR_ERR(crtc_state);
|
|
|
|
if (!crtc_state->base.enable)
|
|
continue;
|
|
|
|
max_pixclk = max(max_pixclk,
|
|
crtc_state->base.adjusted_mode.crtc_clock);
|
|
}
|
|
|
|
return max_pixclk;
|
|
}
|
|
|
|
static int valleyview_modeset_calc_cdclk(struct drm_atomic_state *state)
|
|
{
|
|
struct drm_device *dev = state->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int max_pixclk = intel_mode_max_pixclk(dev, state);
|
|
|
|
if (max_pixclk < 0)
|
|
return max_pixclk;
|
|
|
|
to_intel_atomic_state(state)->cdclk =
|
|
valleyview_calc_cdclk(dev_priv, max_pixclk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int broxton_modeset_calc_cdclk(struct drm_atomic_state *state)
|
|
{
|
|
struct drm_device *dev = state->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int max_pixclk = intel_mode_max_pixclk(dev, state);
|
|
|
|
if (max_pixclk < 0)
|
|
return max_pixclk;
|
|
|
|
to_intel_atomic_state(state)->cdclk =
|
|
broxton_calc_cdclk(dev_priv, max_pixclk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv)
|
|
{
|
|
unsigned int credits, default_credits;
|
|
|
|
if (IS_CHERRYVIEW(dev_priv))
|
|
default_credits = PFI_CREDIT(12);
|
|
else
|
|
default_credits = PFI_CREDIT(8);
|
|
|
|
if (dev_priv->cdclk_freq >= dev_priv->czclk_freq) {
|
|
/* CHV suggested value is 31 or 63 */
|
|
if (IS_CHERRYVIEW(dev_priv))
|
|
credits = PFI_CREDIT_63;
|
|
else
|
|
credits = PFI_CREDIT(15);
|
|
} else {
|
|
credits = default_credits;
|
|
}
|
|
|
|
/*
|
|
* WA - write default credits before re-programming
|
|
* FIXME: should we also set the resend bit here?
|
|
*/
|
|
I915_WRITE(GCI_CONTROL, VGA_FAST_MODE_DISABLE |
|
|
default_credits);
|
|
|
|
I915_WRITE(GCI_CONTROL, VGA_FAST_MODE_DISABLE |
|
|
credits | PFI_CREDIT_RESEND);
|
|
|
|
/*
|
|
* FIXME is this guaranteed to clear
|
|
* immediately or should we poll for it?
|
|
*/
|
|
WARN_ON(I915_READ(GCI_CONTROL) & PFI_CREDIT_RESEND);
|
|
}
|
|
|
|
static void valleyview_modeset_commit_cdclk(struct drm_atomic_state *old_state)
|
|
{
|
|
struct drm_device *dev = old_state->dev;
|
|
unsigned int req_cdclk = to_intel_atomic_state(old_state)->cdclk;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
/*
|
|
* FIXME: We can end up here with all power domains off, yet
|
|
* with a CDCLK frequency other than the minimum. To account
|
|
* for this take the PIPE-A power domain, which covers the HW
|
|
* blocks needed for the following programming. This can be
|
|
* removed once it's guaranteed that we get here either with
|
|
* the minimum CDCLK set, or the required power domains
|
|
* enabled.
|
|
*/
|
|
intel_display_power_get(dev_priv, POWER_DOMAIN_PIPE_A);
|
|
|
|
if (IS_CHERRYVIEW(dev))
|
|
cherryview_set_cdclk(dev, req_cdclk);
|
|
else
|
|
valleyview_set_cdclk(dev, req_cdclk);
|
|
|
|
vlv_program_pfi_credits(dev_priv);
|
|
|
|
intel_display_power_put(dev_priv, POWER_DOMAIN_PIPE_A);
|
|
}
|
|
|
|
static void valleyview_crtc_enable(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct intel_encoder *encoder;
|
|
int pipe = intel_crtc->pipe;
|
|
bool is_dsi;
|
|
|
|
if (WARN_ON(intel_crtc->active))
|
|
return;
|
|
|
|
is_dsi = intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DSI);
|
|
|
|
if (intel_crtc->config->has_dp_encoder)
|
|
intel_dp_set_m_n(intel_crtc, M1_N1);
|
|
|
|
intel_set_pipe_timings(intel_crtc);
|
|
|
|
if (IS_CHERRYVIEW(dev) && pipe == PIPE_B) {
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
I915_WRITE(CHV_BLEND(pipe), CHV_BLEND_LEGACY);
|
|
I915_WRITE(CHV_CANVAS(pipe), 0);
|
|
}
|
|
|
|
i9xx_set_pipeconf(intel_crtc);
|
|
|
|
intel_crtc->active = true;
|
|
|
|
intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
|
|
|
|
for_each_encoder_on_crtc(dev, crtc, encoder)
|
|
if (encoder->pre_pll_enable)
|
|
encoder->pre_pll_enable(encoder);
|
|
|
|
if (!is_dsi) {
|
|
if (IS_CHERRYVIEW(dev)) {
|
|
chv_prepare_pll(intel_crtc, intel_crtc->config);
|
|
chv_enable_pll(intel_crtc, intel_crtc->config);
|
|
} else {
|
|
vlv_prepare_pll(intel_crtc, intel_crtc->config);
|
|
vlv_enable_pll(intel_crtc, intel_crtc->config);
|
|
}
|
|
}
|
|
|
|
for_each_encoder_on_crtc(dev, crtc, encoder)
|
|
if (encoder->pre_enable)
|
|
encoder->pre_enable(encoder);
|
|
|
|
i9xx_pfit_enable(intel_crtc);
|
|
|
|
intel_crtc_load_lut(crtc);
|
|
|
|
intel_enable_pipe(intel_crtc);
|
|
|
|
assert_vblank_disabled(crtc);
|
|
drm_crtc_vblank_on(crtc);
|
|
|
|
for_each_encoder_on_crtc(dev, crtc, encoder)
|
|
encoder->enable(encoder);
|
|
}
|
|
|
|
static void i9xx_set_pll_dividers(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
I915_WRITE(FP0(crtc->pipe), crtc->config->dpll_hw_state.fp0);
|
|
I915_WRITE(FP1(crtc->pipe), crtc->config->dpll_hw_state.fp1);
|
|
}
|
|
|
|
static void i9xx_crtc_enable(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct intel_encoder *encoder;
|
|
int pipe = intel_crtc->pipe;
|
|
|
|
if (WARN_ON(intel_crtc->active))
|
|
return;
|
|
|
|
i9xx_set_pll_dividers(intel_crtc);
|
|
|
|
if (intel_crtc->config->has_dp_encoder)
|
|
intel_dp_set_m_n(intel_crtc, M1_N1);
|
|
|
|
intel_set_pipe_timings(intel_crtc);
|
|
|
|
i9xx_set_pipeconf(intel_crtc);
|
|
|
|
intel_crtc->active = true;
|
|
|
|
if (!IS_GEN2(dev))
|
|
intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
|
|
|
|
for_each_encoder_on_crtc(dev, crtc, encoder)
|
|
if (encoder->pre_enable)
|
|
encoder->pre_enable(encoder);
|
|
|
|
i9xx_enable_pll(intel_crtc);
|
|
|
|
i9xx_pfit_enable(intel_crtc);
|
|
|
|
intel_crtc_load_lut(crtc);
|
|
|
|
intel_update_watermarks(crtc);
|
|
intel_enable_pipe(intel_crtc);
|
|
|
|
assert_vblank_disabled(crtc);
|
|
drm_crtc_vblank_on(crtc);
|
|
|
|
for_each_encoder_on_crtc(dev, crtc, encoder)
|
|
encoder->enable(encoder);
|
|
}
|
|
|
|
static void i9xx_pfit_disable(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (!crtc->config->gmch_pfit.control)
|
|
return;
|
|
|
|
assert_pipe_disabled(dev_priv, crtc->pipe);
|
|
|
|
DRM_DEBUG_DRIVER("disabling pfit, current: 0x%08x\n",
|
|
I915_READ(PFIT_CONTROL));
|
|
I915_WRITE(PFIT_CONTROL, 0);
|
|
}
|
|
|
|
static void i9xx_crtc_disable(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct intel_encoder *encoder;
|
|
int pipe = intel_crtc->pipe;
|
|
|
|
/*
|
|
* On gen2 planes are double buffered but the pipe isn't, so we must
|
|
* wait for planes to fully turn off before disabling the pipe.
|
|
* We also need to wait on all gmch platforms because of the
|
|
* self-refresh mode constraint explained above.
|
|
*/
|
|
intel_wait_for_vblank(dev, pipe);
|
|
|
|
for_each_encoder_on_crtc(dev, crtc, encoder)
|
|
encoder->disable(encoder);
|
|
|
|
drm_crtc_vblank_off(crtc);
|
|
assert_vblank_disabled(crtc);
|
|
|
|
intel_disable_pipe(intel_crtc);
|
|
|
|
i9xx_pfit_disable(intel_crtc);
|
|
|
|
for_each_encoder_on_crtc(dev, crtc, encoder)
|
|
if (encoder->post_disable)
|
|
encoder->post_disable(encoder);
|
|
|
|
if (!intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DSI)) {
|
|
if (IS_CHERRYVIEW(dev))
|
|
chv_disable_pll(dev_priv, pipe);
|
|
else if (IS_VALLEYVIEW(dev))
|
|
vlv_disable_pll(dev_priv, pipe);
|
|
else
|
|
i9xx_disable_pll(intel_crtc);
|
|
}
|
|
|
|
for_each_encoder_on_crtc(dev, crtc, encoder)
|
|
if (encoder->post_pll_disable)
|
|
encoder->post_pll_disable(encoder);
|
|
|
|
if (!IS_GEN2(dev))
|
|
intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
|
|
}
|
|
|
|
static void intel_crtc_disable_noatomic(struct drm_crtc *crtc)
|
|
{
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct drm_i915_private *dev_priv = to_i915(crtc->dev);
|
|
enum intel_display_power_domain domain;
|
|
unsigned long domains;
|
|
|
|
if (!intel_crtc->active)
|
|
return;
|
|
|
|
if (to_intel_plane_state(crtc->primary->state)->visible) {
|
|
WARN_ON(intel_crtc->unpin_work);
|
|
|
|
intel_pre_disable_primary(crtc);
|
|
}
|
|
|
|
intel_crtc_disable_planes(crtc, crtc->state->plane_mask);
|
|
dev_priv->display.crtc_disable(crtc);
|
|
intel_crtc->active = false;
|
|
intel_update_watermarks(crtc);
|
|
intel_disable_shared_dpll(intel_crtc);
|
|
|
|
domains = intel_crtc->enabled_power_domains;
|
|
for_each_power_domain(domain, domains)
|
|
intel_display_power_put(dev_priv, domain);
|
|
intel_crtc->enabled_power_domains = 0;
|
|
}
|
|
|
|
/*
|
|
* turn all crtc's off, but do not adjust state
|
|
* This has to be paired with a call to intel_modeset_setup_hw_state.
|
|
*/
|
|
int intel_display_suspend(struct drm_device *dev)
|
|
{
|
|
struct drm_mode_config *config = &dev->mode_config;
|
|
struct drm_modeset_acquire_ctx *ctx = config->acquire_ctx;
|
|
struct drm_atomic_state *state;
|
|
struct drm_crtc *crtc;
|
|
unsigned crtc_mask = 0;
|
|
int ret = 0;
|
|
|
|
if (WARN_ON(!ctx))
|
|
return 0;
|
|
|
|
lockdep_assert_held(&ctx->ww_ctx);
|
|
state = drm_atomic_state_alloc(dev);
|
|
if (WARN_ON(!state))
|
|
return -ENOMEM;
|
|
|
|
state->acquire_ctx = ctx;
|
|
state->allow_modeset = true;
|
|
|
|
for_each_crtc(dev, crtc) {
|
|
struct drm_crtc_state *crtc_state =
|
|
drm_atomic_get_crtc_state(state, crtc);
|
|
|
|
ret = PTR_ERR_OR_ZERO(crtc_state);
|
|
if (ret)
|
|
goto free;
|
|
|
|
if (!crtc_state->active)
|
|
continue;
|
|
|
|
crtc_state->active = false;
|
|
crtc_mask |= 1 << drm_crtc_index(crtc);
|
|
}
|
|
|
|
if (crtc_mask) {
|
|
ret = drm_atomic_commit(state);
|
|
|
|
if (!ret) {
|
|
for_each_crtc(dev, crtc)
|
|
if (crtc_mask & (1 << drm_crtc_index(crtc)))
|
|
crtc->state->active = true;
|
|
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
free:
|
|
if (ret)
|
|
DRM_ERROR("Suspending crtc's failed with %i\n", ret);
|
|
drm_atomic_state_free(state);
|
|
return ret;
|
|
}
|
|
|
|
void intel_encoder_destroy(struct drm_encoder *encoder)
|
|
{
|
|
struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
|
|
|
|
drm_encoder_cleanup(encoder);
|
|
kfree(intel_encoder);
|
|
}
|
|
|
|
/* Cross check the actual hw state with our own modeset state tracking (and it's
|
|
* internal consistency). */
|
|
static void intel_connector_check_state(struct intel_connector *connector)
|
|
{
|
|
struct drm_crtc *crtc = connector->base.state->crtc;
|
|
|
|
DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
|
|
connector->base.base.id,
|
|
connector->base.name);
|
|
|
|
if (connector->get_hw_state(connector)) {
|
|
struct intel_encoder *encoder = connector->encoder;
|
|
struct drm_connector_state *conn_state = connector->base.state;
|
|
|
|
I915_STATE_WARN(!crtc,
|
|
"connector enabled without attached crtc\n");
|
|
|
|
if (!crtc)
|
|
return;
|
|
|
|
I915_STATE_WARN(!crtc->state->active,
|
|
"connector is active, but attached crtc isn't\n");
|
|
|
|
if (!encoder || encoder->type == INTEL_OUTPUT_DP_MST)
|
|
return;
|
|
|
|
I915_STATE_WARN(conn_state->best_encoder != &encoder->base,
|
|
"atomic encoder doesn't match attached encoder\n");
|
|
|
|
I915_STATE_WARN(conn_state->crtc != encoder->base.crtc,
|
|
"attached encoder crtc differs from connector crtc\n");
|
|
} else {
|
|
I915_STATE_WARN(crtc && crtc->state->active,
|
|
"attached crtc is active, but connector isn't\n");
|
|
I915_STATE_WARN(!crtc && connector->base.state->best_encoder,
|
|
"best encoder set without crtc!\n");
|
|
}
|
|
}
|
|
|
|
int intel_connector_init(struct intel_connector *connector)
|
|
{
|
|
struct drm_connector_state *connector_state;
|
|
|
|
connector_state = kzalloc(sizeof *connector_state, GFP_KERNEL);
|
|
if (!connector_state)
|
|
return -ENOMEM;
|
|
|
|
connector->base.state = connector_state;
|
|
return 0;
|
|
}
|
|
|
|
struct intel_connector *intel_connector_alloc(void)
|
|
{
|
|
struct intel_connector *connector;
|
|
|
|
connector = kzalloc(sizeof *connector, GFP_KERNEL);
|
|
if (!connector)
|
|
return NULL;
|
|
|
|
if (intel_connector_init(connector) < 0) {
|
|
kfree(connector);
|
|
return NULL;
|
|
}
|
|
|
|
return connector;
|
|
}
|
|
|
|
/* Simple connector->get_hw_state implementation for encoders that support only
|
|
* one connector and no cloning and hence the encoder state determines the state
|
|
* of the connector. */
|
|
bool intel_connector_get_hw_state(struct intel_connector *connector)
|
|
{
|
|
enum pipe pipe = 0;
|
|
struct intel_encoder *encoder = connector->encoder;
|
|
|
|
return encoder->get_hw_state(encoder, &pipe);
|
|
}
|
|
|
|
static int pipe_required_fdi_lanes(struct intel_crtc_state *crtc_state)
|
|
{
|
|
if (crtc_state->base.enable && crtc_state->has_pch_encoder)
|
|
return crtc_state->fdi_lanes;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ironlake_check_fdi_lanes(struct drm_device *dev, enum pipe pipe,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_atomic_state *state = pipe_config->base.state;
|
|
struct intel_crtc *other_crtc;
|
|
struct intel_crtc_state *other_crtc_state;
|
|
|
|
DRM_DEBUG_KMS("checking fdi config on pipe %c, lanes %i\n",
|
|
pipe_name(pipe), pipe_config->fdi_lanes);
|
|
if (pipe_config->fdi_lanes > 4) {
|
|
DRM_DEBUG_KMS("invalid fdi lane config on pipe %c: %i lanes\n",
|
|
pipe_name(pipe), pipe_config->fdi_lanes);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
|
|
if (pipe_config->fdi_lanes > 2) {
|
|
DRM_DEBUG_KMS("only 2 lanes on haswell, required: %i lanes\n",
|
|
pipe_config->fdi_lanes);
|
|
return -EINVAL;
|
|
} else {
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
if (INTEL_INFO(dev)->num_pipes == 2)
|
|
return 0;
|
|
|
|
/* Ivybridge 3 pipe is really complicated */
|
|
switch (pipe) {
|
|
case PIPE_A:
|
|
return 0;
|
|
case PIPE_B:
|
|
if (pipe_config->fdi_lanes <= 2)
|
|
return 0;
|
|
|
|
other_crtc = to_intel_crtc(intel_get_crtc_for_pipe(dev, PIPE_C));
|
|
other_crtc_state =
|
|
intel_atomic_get_crtc_state(state, other_crtc);
|
|
if (IS_ERR(other_crtc_state))
|
|
return PTR_ERR(other_crtc_state);
|
|
|
|
if (pipe_required_fdi_lanes(other_crtc_state) > 0) {
|
|
DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
|
|
pipe_name(pipe), pipe_config->fdi_lanes);
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
case PIPE_C:
|
|
if (pipe_config->fdi_lanes > 2) {
|
|
DRM_DEBUG_KMS("only 2 lanes on pipe %c: required %i lanes\n",
|
|
pipe_name(pipe), pipe_config->fdi_lanes);
|
|
return -EINVAL;
|
|
}
|
|
|
|
other_crtc = to_intel_crtc(intel_get_crtc_for_pipe(dev, PIPE_B));
|
|
other_crtc_state =
|
|
intel_atomic_get_crtc_state(state, other_crtc);
|
|
if (IS_ERR(other_crtc_state))
|
|
return PTR_ERR(other_crtc_state);
|
|
|
|
if (pipe_required_fdi_lanes(other_crtc_state) > 2) {
|
|
DRM_DEBUG_KMS("fdi link B uses too many lanes to enable link C\n");
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
default:
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
#define RETRY 1
|
|
static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_device *dev = intel_crtc->base.dev;
|
|
const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
|
|
int lane, link_bw, fdi_dotclock, ret;
|
|
bool needs_recompute = false;
|
|
|
|
retry:
|
|
/* FDI is a binary signal running at ~2.7GHz, encoding
|
|
* each output octet as 10 bits. The actual frequency
|
|
* is stored as a divider into a 100MHz clock, and the
|
|
* mode pixel clock is stored in units of 1KHz.
|
|
* Hence the bw of each lane in terms of the mode signal
|
|
* is:
|
|
*/
|
|
link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
|
|
|
|
fdi_dotclock = adjusted_mode->crtc_clock;
|
|
|
|
lane = ironlake_get_lanes_required(fdi_dotclock, link_bw,
|
|
pipe_config->pipe_bpp);
|
|
|
|
pipe_config->fdi_lanes = lane;
|
|
|
|
intel_link_compute_m_n(pipe_config->pipe_bpp, lane, fdi_dotclock,
|
|
link_bw, &pipe_config->fdi_m_n);
|
|
|
|
ret = ironlake_check_fdi_lanes(intel_crtc->base.dev,
|
|
intel_crtc->pipe, pipe_config);
|
|
if (ret == -EINVAL && pipe_config->pipe_bpp > 6*3) {
|
|
pipe_config->pipe_bpp -= 2*3;
|
|
DRM_DEBUG_KMS("fdi link bw constraint, reducing pipe bpp to %i\n",
|
|
pipe_config->pipe_bpp);
|
|
needs_recompute = true;
|
|
pipe_config->bw_constrained = true;
|
|
|
|
goto retry;
|
|
}
|
|
|
|
if (needs_recompute)
|
|
return RETRY;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static bool pipe_config_supports_ips(struct drm_i915_private *dev_priv,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
if (pipe_config->pipe_bpp > 24)
|
|
return false;
|
|
|
|
/* HSW can handle pixel rate up to cdclk? */
|
|
if (IS_HASWELL(dev_priv->dev))
|
|
return true;
|
|
|
|
/*
|
|
* We compare against max which means we must take
|
|
* the increased cdclk requirement into account when
|
|
* calculating the new cdclk.
|
|
*
|
|
* Should measure whether using a lower cdclk w/o IPS
|
|
*/
|
|
return ilk_pipe_pixel_rate(pipe_config) <=
|
|
dev_priv->max_cdclk_freq * 95 / 100;
|
|
}
|
|
|
|
static void hsw_compute_ips_config(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
pipe_config->ips_enabled = i915.enable_ips &&
|
|
hsw_crtc_supports_ips(crtc) &&
|
|
pipe_config_supports_ips(dev_priv, pipe_config);
|
|
}
|
|
|
|
static bool intel_crtc_supports_double_wide(const struct intel_crtc *crtc)
|
|
{
|
|
const struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
|
|
|
|
/* GDG double wide on either pipe, otherwise pipe A only */
|
|
return INTEL_INFO(dev_priv)->gen < 4 &&
|
|
(crtc->pipe == PIPE_A || IS_I915G(dev_priv));
|
|
}
|
|
|
|
static int intel_crtc_compute_config(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
|
|
|
|
/* FIXME should check pixel clock limits on all platforms */
|
|
if (INTEL_INFO(dev)->gen < 4) {
|
|
int clock_limit = dev_priv->max_cdclk_freq * 9 / 10;
|
|
|
|
/*
|
|
* Enable double wide mode when the dot clock
|
|
* is > 90% of the (display) core speed.
|
|
*/
|
|
if (intel_crtc_supports_double_wide(crtc) &&
|
|
adjusted_mode->crtc_clock > clock_limit) {
|
|
clock_limit *= 2;
|
|
pipe_config->double_wide = true;
|
|
}
|
|
|
|
if (adjusted_mode->crtc_clock > clock_limit) {
|
|
DRM_DEBUG_KMS("requested pixel clock (%d kHz) too high (max: %d kHz, double wide: %s)\n",
|
|
adjusted_mode->crtc_clock, clock_limit,
|
|
yesno(pipe_config->double_wide));
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Pipe horizontal size must be even in:
|
|
* - DVO ganged mode
|
|
* - LVDS dual channel mode
|
|
* - Double wide pipe
|
|
*/
|
|
if ((intel_pipe_will_have_type(pipe_config, INTEL_OUTPUT_LVDS) &&
|
|
intel_is_dual_link_lvds(dev)) || pipe_config->double_wide)
|
|
pipe_config->pipe_src_w &= ~1;
|
|
|
|
/* Cantiga+ cannot handle modes with a hsync front porch of 0.
|
|
* WaPruneModeWithIncorrectHsyncOffset:ctg,elk,ilk,snb,ivb,vlv,hsw.
|
|
*/
|
|
if ((INTEL_INFO(dev)->gen > 4 || IS_G4X(dev)) &&
|
|
adjusted_mode->crtc_hsync_start == adjusted_mode->crtc_hdisplay)
|
|
return -EINVAL;
|
|
|
|
if (HAS_IPS(dev))
|
|
hsw_compute_ips_config(crtc, pipe_config);
|
|
|
|
if (pipe_config->has_pch_encoder)
|
|
return ironlake_fdi_compute_config(crtc, pipe_config);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int skylake_get_display_clock_speed(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
uint32_t lcpll1 = I915_READ(LCPLL1_CTL);
|
|
uint32_t cdctl = I915_READ(CDCLK_CTL);
|
|
uint32_t linkrate;
|
|
|
|
if (!(lcpll1 & LCPLL_PLL_ENABLE))
|
|
return 24000; /* 24MHz is the cd freq with NSSC ref */
|
|
|
|
if ((cdctl & CDCLK_FREQ_SEL_MASK) == CDCLK_FREQ_540)
|
|
return 540000;
|
|
|
|
linkrate = (I915_READ(DPLL_CTRL1) &
|
|
DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)) >> 1;
|
|
|
|
if (linkrate == DPLL_CTRL1_LINK_RATE_2160 ||
|
|
linkrate == DPLL_CTRL1_LINK_RATE_1080) {
|
|
/* vco 8640 */
|
|
switch (cdctl & CDCLK_FREQ_SEL_MASK) {
|
|
case CDCLK_FREQ_450_432:
|
|
return 432000;
|
|
case CDCLK_FREQ_337_308:
|
|
return 308570;
|
|
case CDCLK_FREQ_675_617:
|
|
return 617140;
|
|
default:
|
|
WARN(1, "Unknown cd freq selection\n");
|
|
}
|
|
} else {
|
|
/* vco 8100 */
|
|
switch (cdctl & CDCLK_FREQ_SEL_MASK) {
|
|
case CDCLK_FREQ_450_432:
|
|
return 450000;
|
|
case CDCLK_FREQ_337_308:
|
|
return 337500;
|
|
case CDCLK_FREQ_675_617:
|
|
return 675000;
|
|
default:
|
|
WARN(1, "Unknown cd freq selection\n");
|
|
}
|
|
}
|
|
|
|
/* error case, do as if DPLL0 isn't enabled */
|
|
return 24000;
|
|
}
|
|
|
|
static int broxton_get_display_clock_speed(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
uint32_t cdctl = I915_READ(CDCLK_CTL);
|
|
uint32_t pll_ratio = I915_READ(BXT_DE_PLL_CTL) & BXT_DE_PLL_RATIO_MASK;
|
|
uint32_t pll_enab = I915_READ(BXT_DE_PLL_ENABLE);
|
|
int cdclk;
|
|
|
|
if (!(pll_enab & BXT_DE_PLL_PLL_ENABLE))
|
|
return 19200;
|
|
|
|
cdclk = 19200 * pll_ratio / 2;
|
|
|
|
switch (cdctl & BXT_CDCLK_CD2X_DIV_SEL_MASK) {
|
|
case BXT_CDCLK_CD2X_DIV_SEL_1:
|
|
return cdclk; /* 576MHz or 624MHz */
|
|
case BXT_CDCLK_CD2X_DIV_SEL_1_5:
|
|
return cdclk * 2 / 3; /* 384MHz */
|
|
case BXT_CDCLK_CD2X_DIV_SEL_2:
|
|
return cdclk / 2; /* 288MHz */
|
|
case BXT_CDCLK_CD2X_DIV_SEL_4:
|
|
return cdclk / 4; /* 144MHz */
|
|
}
|
|
|
|
/* error case, do as if DE PLL isn't enabled */
|
|
return 19200;
|
|
}
|
|
|
|
static int broadwell_get_display_clock_speed(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t lcpll = I915_READ(LCPLL_CTL);
|
|
uint32_t freq = lcpll & LCPLL_CLK_FREQ_MASK;
|
|
|
|
if (lcpll & LCPLL_CD_SOURCE_FCLK)
|
|
return 800000;
|
|
else if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
|
|
return 450000;
|
|
else if (freq == LCPLL_CLK_FREQ_450)
|
|
return 450000;
|
|
else if (freq == LCPLL_CLK_FREQ_54O_BDW)
|
|
return 540000;
|
|
else if (freq == LCPLL_CLK_FREQ_337_5_BDW)
|
|
return 337500;
|
|
else
|
|
return 675000;
|
|
}
|
|
|
|
static int haswell_get_display_clock_speed(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t lcpll = I915_READ(LCPLL_CTL);
|
|
uint32_t freq = lcpll & LCPLL_CLK_FREQ_MASK;
|
|
|
|
if (lcpll & LCPLL_CD_SOURCE_FCLK)
|
|
return 800000;
|
|
else if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
|
|
return 450000;
|
|
else if (freq == LCPLL_CLK_FREQ_450)
|
|
return 450000;
|
|
else if (IS_HSW_ULT(dev))
|
|
return 337500;
|
|
else
|
|
return 540000;
|
|
}
|
|
|
|
static int valleyview_get_display_clock_speed(struct drm_device *dev)
|
|
{
|
|
return vlv_get_cck_clock_hpll(to_i915(dev), "cdclk",
|
|
CCK_DISPLAY_CLOCK_CONTROL);
|
|
}
|
|
|
|
static int ilk_get_display_clock_speed(struct drm_device *dev)
|
|
{
|
|
return 450000;
|
|
}
|
|
|
|
static int i945_get_display_clock_speed(struct drm_device *dev)
|
|
{
|
|
return 400000;
|
|
}
|
|
|
|
static int i915_get_display_clock_speed(struct drm_device *dev)
|
|
{
|
|
return 333333;
|
|
}
|
|
|
|
static int i9xx_misc_get_display_clock_speed(struct drm_device *dev)
|
|
{
|
|
return 200000;
|
|
}
|
|
|
|
static int pnv_get_display_clock_speed(struct drm_device *dev)
|
|
{
|
|
u16 gcfgc = 0;
|
|
|
|
pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
|
|
|
|
switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
|
|
case GC_DISPLAY_CLOCK_267_MHZ_PNV:
|
|
return 266667;
|
|
case GC_DISPLAY_CLOCK_333_MHZ_PNV:
|
|
return 333333;
|
|
case GC_DISPLAY_CLOCK_444_MHZ_PNV:
|
|
return 444444;
|
|
case GC_DISPLAY_CLOCK_200_MHZ_PNV:
|
|
return 200000;
|
|
default:
|
|
DRM_ERROR("Unknown pnv display core clock 0x%04x\n", gcfgc);
|
|
case GC_DISPLAY_CLOCK_133_MHZ_PNV:
|
|
return 133333;
|
|
case GC_DISPLAY_CLOCK_167_MHZ_PNV:
|
|
return 166667;
|
|
}
|
|
}
|
|
|
|
static int i915gm_get_display_clock_speed(struct drm_device *dev)
|
|
{
|
|
u16 gcfgc = 0;
|
|
|
|
pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
|
|
|
|
if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
|
|
return 133333;
|
|
else {
|
|
switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
|
|
case GC_DISPLAY_CLOCK_333_MHZ:
|
|
return 333333;
|
|
default:
|
|
case GC_DISPLAY_CLOCK_190_200_MHZ:
|
|
return 190000;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int i865_get_display_clock_speed(struct drm_device *dev)
|
|
{
|
|
return 266667;
|
|
}
|
|
|
|
static int i85x_get_display_clock_speed(struct drm_device *dev)
|
|
{
|
|
u16 hpllcc = 0;
|
|
|
|
/*
|
|
* 852GM/852GMV only supports 133 MHz and the HPLLCC
|
|
* encoding is different :(
|
|
* FIXME is this the right way to detect 852GM/852GMV?
|
|
*/
|
|
if (dev->pdev->revision == 0x1)
|
|
return 133333;
|
|
|
|
pci_bus_read_config_word(dev->pdev->bus,
|
|
PCI_DEVFN(0, 3), HPLLCC, &hpllcc);
|
|
|
|
/* Assume that the hardware is in the high speed state. This
|
|
* should be the default.
|
|
*/
|
|
switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
|
|
case GC_CLOCK_133_200:
|
|
case GC_CLOCK_133_200_2:
|
|
case GC_CLOCK_100_200:
|
|
return 200000;
|
|
case GC_CLOCK_166_250:
|
|
return 250000;
|
|
case GC_CLOCK_100_133:
|
|
return 133333;
|
|
case GC_CLOCK_133_266:
|
|
case GC_CLOCK_133_266_2:
|
|
case GC_CLOCK_166_266:
|
|
return 266667;
|
|
}
|
|
|
|
/* Shouldn't happen */
|
|
return 0;
|
|
}
|
|
|
|
static int i830_get_display_clock_speed(struct drm_device *dev)
|
|
{
|
|
return 133333;
|
|
}
|
|
|
|
static unsigned int intel_hpll_vco(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
static const unsigned int blb_vco[8] = {
|
|
[0] = 3200000,
|
|
[1] = 4000000,
|
|
[2] = 5333333,
|
|
[3] = 4800000,
|
|
[4] = 6400000,
|
|
};
|
|
static const unsigned int pnv_vco[8] = {
|
|
[0] = 3200000,
|
|
[1] = 4000000,
|
|
[2] = 5333333,
|
|
[3] = 4800000,
|
|
[4] = 2666667,
|
|
};
|
|
static const unsigned int cl_vco[8] = {
|
|
[0] = 3200000,
|
|
[1] = 4000000,
|
|
[2] = 5333333,
|
|
[3] = 6400000,
|
|
[4] = 3333333,
|
|
[5] = 3566667,
|
|
[6] = 4266667,
|
|
};
|
|
static const unsigned int elk_vco[8] = {
|
|
[0] = 3200000,
|
|
[1] = 4000000,
|
|
[2] = 5333333,
|
|
[3] = 4800000,
|
|
};
|
|
static const unsigned int ctg_vco[8] = {
|
|
[0] = 3200000,
|
|
[1] = 4000000,
|
|
[2] = 5333333,
|
|
[3] = 6400000,
|
|
[4] = 2666667,
|
|
[5] = 4266667,
|
|
};
|
|
const unsigned int *vco_table;
|
|
unsigned int vco;
|
|
uint8_t tmp = 0;
|
|
|
|
/* FIXME other chipsets? */
|
|
if (IS_GM45(dev))
|
|
vco_table = ctg_vco;
|
|
else if (IS_G4X(dev))
|
|
vco_table = elk_vco;
|
|
else if (IS_CRESTLINE(dev))
|
|
vco_table = cl_vco;
|
|
else if (IS_PINEVIEW(dev))
|
|
vco_table = pnv_vco;
|
|
else if (IS_G33(dev))
|
|
vco_table = blb_vco;
|
|
else
|
|
return 0;
|
|
|
|
tmp = I915_READ(IS_MOBILE(dev) ? HPLLVCO_MOBILE : HPLLVCO);
|
|
|
|
vco = vco_table[tmp & 0x7];
|
|
if (vco == 0)
|
|
DRM_ERROR("Bad HPLL VCO (HPLLVCO=0x%02x)\n", tmp);
|
|
else
|
|
DRM_DEBUG_KMS("HPLL VCO %u kHz\n", vco);
|
|
|
|
return vco;
|
|
}
|
|
|
|
static int gm45_get_display_clock_speed(struct drm_device *dev)
|
|
{
|
|
unsigned int cdclk_sel, vco = intel_hpll_vco(dev);
|
|
uint16_t tmp = 0;
|
|
|
|
pci_read_config_word(dev->pdev, GCFGC, &tmp);
|
|
|
|
cdclk_sel = (tmp >> 12) & 0x1;
|
|
|
|
switch (vco) {
|
|
case 2666667:
|
|
case 4000000:
|
|
case 5333333:
|
|
return cdclk_sel ? 333333 : 222222;
|
|
case 3200000:
|
|
return cdclk_sel ? 320000 : 228571;
|
|
default:
|
|
DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u, CFGC=0x%04x\n", vco, tmp);
|
|
return 222222;
|
|
}
|
|
}
|
|
|
|
static int i965gm_get_display_clock_speed(struct drm_device *dev)
|
|
{
|
|
static const uint8_t div_3200[] = { 16, 10, 8 };
|
|
static const uint8_t div_4000[] = { 20, 12, 10 };
|
|
static const uint8_t div_5333[] = { 24, 16, 14 };
|
|
const uint8_t *div_table;
|
|
unsigned int cdclk_sel, vco = intel_hpll_vco(dev);
|
|
uint16_t tmp = 0;
|
|
|
|
pci_read_config_word(dev->pdev, GCFGC, &tmp);
|
|
|
|
cdclk_sel = ((tmp >> 8) & 0x1f) - 1;
|
|
|
|
if (cdclk_sel >= ARRAY_SIZE(div_3200))
|
|
goto fail;
|
|
|
|
switch (vco) {
|
|
case 3200000:
|
|
div_table = div_3200;
|
|
break;
|
|
case 4000000:
|
|
div_table = div_4000;
|
|
break;
|
|
case 5333333:
|
|
div_table = div_5333;
|
|
break;
|
|
default:
|
|
goto fail;
|
|
}
|
|
|
|
return DIV_ROUND_CLOSEST(vco, div_table[cdclk_sel]);
|
|
|
|
fail:
|
|
DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%04x\n", vco, tmp);
|
|
return 200000;
|
|
}
|
|
|
|
static int g33_get_display_clock_speed(struct drm_device *dev)
|
|
{
|
|
static const uint8_t div_3200[] = { 12, 10, 8, 7, 5, 16 };
|
|
static const uint8_t div_4000[] = { 14, 12, 10, 8, 6, 20 };
|
|
static const uint8_t div_4800[] = { 20, 14, 12, 10, 8, 24 };
|
|
static const uint8_t div_5333[] = { 20, 16, 12, 12, 8, 28 };
|
|
const uint8_t *div_table;
|
|
unsigned int cdclk_sel, vco = intel_hpll_vco(dev);
|
|
uint16_t tmp = 0;
|
|
|
|
pci_read_config_word(dev->pdev, GCFGC, &tmp);
|
|
|
|
cdclk_sel = (tmp >> 4) & 0x7;
|
|
|
|
if (cdclk_sel >= ARRAY_SIZE(div_3200))
|
|
goto fail;
|
|
|
|
switch (vco) {
|
|
case 3200000:
|
|
div_table = div_3200;
|
|
break;
|
|
case 4000000:
|
|
div_table = div_4000;
|
|
break;
|
|
case 4800000:
|
|
div_table = div_4800;
|
|
break;
|
|
case 5333333:
|
|
div_table = div_5333;
|
|
break;
|
|
default:
|
|
goto fail;
|
|
}
|
|
|
|
return DIV_ROUND_CLOSEST(vco, div_table[cdclk_sel]);
|
|
|
|
fail:
|
|
DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%08x\n", vco, tmp);
|
|
return 190476;
|
|
}
|
|
|
|
static void
|
|
intel_reduce_m_n_ratio(uint32_t *num, uint32_t *den)
|
|
{
|
|
while (*num > DATA_LINK_M_N_MASK ||
|
|
*den > DATA_LINK_M_N_MASK) {
|
|
*num >>= 1;
|
|
*den >>= 1;
|
|
}
|
|
}
|
|
|
|
static void compute_m_n(unsigned int m, unsigned int n,
|
|
uint32_t *ret_m, uint32_t *ret_n)
|
|
{
|
|
*ret_n = min_t(unsigned int, roundup_pow_of_two(n), DATA_LINK_N_MAX);
|
|
*ret_m = div_u64((uint64_t) m * *ret_n, n);
|
|
intel_reduce_m_n_ratio(ret_m, ret_n);
|
|
}
|
|
|
|
void
|
|
intel_link_compute_m_n(int bits_per_pixel, int nlanes,
|
|
int pixel_clock, int link_clock,
|
|
struct intel_link_m_n *m_n)
|
|
{
|
|
m_n->tu = 64;
|
|
|
|
compute_m_n(bits_per_pixel * pixel_clock,
|
|
link_clock * nlanes * 8,
|
|
&m_n->gmch_m, &m_n->gmch_n);
|
|
|
|
compute_m_n(pixel_clock, link_clock,
|
|
&m_n->link_m, &m_n->link_n);
|
|
}
|
|
|
|
static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
|
|
{
|
|
if (i915.panel_use_ssc >= 0)
|
|
return i915.panel_use_ssc != 0;
|
|
return dev_priv->vbt.lvds_use_ssc
|
|
&& !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
|
|
}
|
|
|
|
static int i9xx_get_refclk(const struct intel_crtc_state *crtc_state,
|
|
int num_connectors)
|
|
{
|
|
struct drm_device *dev = crtc_state->base.crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int refclk;
|
|
|
|
WARN_ON(!crtc_state->base.state);
|
|
|
|
if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev)) {
|
|
refclk = 100000;
|
|
} else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
|
|
intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
|
|
refclk = dev_priv->vbt.lvds_ssc_freq;
|
|
DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
|
|
} else if (!IS_GEN2(dev)) {
|
|
refclk = 96000;
|
|
} else {
|
|
refclk = 48000;
|
|
}
|
|
|
|
return refclk;
|
|
}
|
|
|
|
static uint32_t pnv_dpll_compute_fp(struct dpll *dpll)
|
|
{
|
|
return (1 << dpll->n) << 16 | dpll->m2;
|
|
}
|
|
|
|
static uint32_t i9xx_dpll_compute_fp(struct dpll *dpll)
|
|
{
|
|
return dpll->n << 16 | dpll->m1 << 8 | dpll->m2;
|
|
}
|
|
|
|
static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *crtc_state,
|
|
intel_clock_t *reduced_clock)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
u32 fp, fp2 = 0;
|
|
|
|
if (IS_PINEVIEW(dev)) {
|
|
fp = pnv_dpll_compute_fp(&crtc_state->dpll);
|
|
if (reduced_clock)
|
|
fp2 = pnv_dpll_compute_fp(reduced_clock);
|
|
} else {
|
|
fp = i9xx_dpll_compute_fp(&crtc_state->dpll);
|
|
if (reduced_clock)
|
|
fp2 = i9xx_dpll_compute_fp(reduced_clock);
|
|
}
|
|
|
|
crtc_state->dpll_hw_state.fp0 = fp;
|
|
|
|
crtc->lowfreq_avail = false;
|
|
if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
|
|
reduced_clock) {
|
|
crtc_state->dpll_hw_state.fp1 = fp2;
|
|
crtc->lowfreq_avail = true;
|
|
} else {
|
|
crtc_state->dpll_hw_state.fp1 = fp;
|
|
}
|
|
}
|
|
|
|
static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv, enum pipe
|
|
pipe)
|
|
{
|
|
u32 reg_val;
|
|
|
|
/*
|
|
* PLLB opamp always calibrates to max value of 0x3f, force enable it
|
|
* and set it to a reasonable value instead.
|
|
*/
|
|
reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
|
|
reg_val &= 0xffffff00;
|
|
reg_val |= 0x00000030;
|
|
vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
|
|
|
|
reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
|
|
reg_val &= 0x8cffffff;
|
|
reg_val = 0x8c000000;
|
|
vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
|
|
|
|
reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
|
|
reg_val &= 0xffffff00;
|
|
vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
|
|
|
|
reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
|
|
reg_val &= 0x00ffffff;
|
|
reg_val |= 0xb0000000;
|
|
vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
|
|
}
|
|
|
|
static void intel_pch_transcoder_set_m_n(struct intel_crtc *crtc,
|
|
struct intel_link_m_n *m_n)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int pipe = crtc->pipe;
|
|
|
|
I915_WRITE(PCH_TRANS_DATA_M1(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
|
|
I915_WRITE(PCH_TRANS_DATA_N1(pipe), m_n->gmch_n);
|
|
I915_WRITE(PCH_TRANS_LINK_M1(pipe), m_n->link_m);
|
|
I915_WRITE(PCH_TRANS_LINK_N1(pipe), m_n->link_n);
|
|
}
|
|
|
|
static void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
|
|
struct intel_link_m_n *m_n,
|
|
struct intel_link_m_n *m2_n2)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int pipe = crtc->pipe;
|
|
enum transcoder transcoder = crtc->config->cpu_transcoder;
|
|
|
|
if (INTEL_INFO(dev)->gen >= 5) {
|
|
I915_WRITE(PIPE_DATA_M1(transcoder), TU_SIZE(m_n->tu) | m_n->gmch_m);
|
|
I915_WRITE(PIPE_DATA_N1(transcoder), m_n->gmch_n);
|
|
I915_WRITE(PIPE_LINK_M1(transcoder), m_n->link_m);
|
|
I915_WRITE(PIPE_LINK_N1(transcoder), m_n->link_n);
|
|
/* M2_N2 registers to be set only for gen < 8 (M2_N2 available
|
|
* for gen < 8) and if DRRS is supported (to make sure the
|
|
* registers are not unnecessarily accessed).
|
|
*/
|
|
if (m2_n2 && (IS_CHERRYVIEW(dev) || INTEL_INFO(dev)->gen < 8) &&
|
|
crtc->config->has_drrs) {
|
|
I915_WRITE(PIPE_DATA_M2(transcoder),
|
|
TU_SIZE(m2_n2->tu) | m2_n2->gmch_m);
|
|
I915_WRITE(PIPE_DATA_N2(transcoder), m2_n2->gmch_n);
|
|
I915_WRITE(PIPE_LINK_M2(transcoder), m2_n2->link_m);
|
|
I915_WRITE(PIPE_LINK_N2(transcoder), m2_n2->link_n);
|
|
}
|
|
} else {
|
|
I915_WRITE(PIPE_DATA_M_G4X(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
|
|
I915_WRITE(PIPE_DATA_N_G4X(pipe), m_n->gmch_n);
|
|
I915_WRITE(PIPE_LINK_M_G4X(pipe), m_n->link_m);
|
|
I915_WRITE(PIPE_LINK_N_G4X(pipe), m_n->link_n);
|
|
}
|
|
}
|
|
|
|
void intel_dp_set_m_n(struct intel_crtc *crtc, enum link_m_n_set m_n)
|
|
{
|
|
struct intel_link_m_n *dp_m_n, *dp_m2_n2 = NULL;
|
|
|
|
if (m_n == M1_N1) {
|
|
dp_m_n = &crtc->config->dp_m_n;
|
|
dp_m2_n2 = &crtc->config->dp_m2_n2;
|
|
} else if (m_n == M2_N2) {
|
|
|
|
/*
|
|
* M2_N2 registers are not supported. Hence m2_n2 divider value
|
|
* needs to be programmed into M1_N1.
|
|
*/
|
|
dp_m_n = &crtc->config->dp_m2_n2;
|
|
} else {
|
|
DRM_ERROR("Unsupported divider value\n");
|
|
return;
|
|
}
|
|
|
|
if (crtc->config->has_pch_encoder)
|
|
intel_pch_transcoder_set_m_n(crtc, &crtc->config->dp_m_n);
|
|
else
|
|
intel_cpu_transcoder_set_m_n(crtc, dp_m_n, dp_m2_n2);
|
|
}
|
|
|
|
static void vlv_compute_dpll(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
u32 dpll, dpll_md;
|
|
|
|
/*
|
|
* Enable DPIO clock input. We should never disable the reference
|
|
* clock for pipe B, since VGA hotplug / manual detection depends
|
|
* on it.
|
|
*/
|
|
dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REF_CLK_ENABLE_VLV |
|
|
DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_REF_CLK_VLV;
|
|
/* We should never disable this, set it here for state tracking */
|
|
if (crtc->pipe == PIPE_B)
|
|
dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
|
|
dpll |= DPLL_VCO_ENABLE;
|
|
pipe_config->dpll_hw_state.dpll = dpll;
|
|
|
|
dpll_md = (pipe_config->pixel_multiplier - 1)
|
|
<< DPLL_MD_UDI_MULTIPLIER_SHIFT;
|
|
pipe_config->dpll_hw_state.dpll_md = dpll_md;
|
|
}
|
|
|
|
static void vlv_prepare_pll(struct intel_crtc *crtc,
|
|
const struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int pipe = crtc->pipe;
|
|
u32 mdiv;
|
|
u32 bestn, bestm1, bestm2, bestp1, bestp2;
|
|
u32 coreclk, reg_val;
|
|
|
|
mutex_lock(&dev_priv->sb_lock);
|
|
|
|
bestn = pipe_config->dpll.n;
|
|
bestm1 = pipe_config->dpll.m1;
|
|
bestm2 = pipe_config->dpll.m2;
|
|
bestp1 = pipe_config->dpll.p1;
|
|
bestp2 = pipe_config->dpll.p2;
|
|
|
|
/* See eDP HDMI DPIO driver vbios notes doc */
|
|
|
|
/* PLL B needs special handling */
|
|
if (pipe == PIPE_B)
|
|
vlv_pllb_recal_opamp(dev_priv, pipe);
|
|
|
|
/* Set up Tx target for periodic Rcomp update */
|
|
vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9_BCAST, 0x0100000f);
|
|
|
|
/* Disable target IRef on PLL */
|
|
reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW8(pipe));
|
|
reg_val &= 0x00ffffff;
|
|
vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW8(pipe), reg_val);
|
|
|
|
/* Disable fast lock */
|
|
vlv_dpio_write(dev_priv, pipe, VLV_CMN_DW0, 0x610);
|
|
|
|
/* Set idtafcrecal before PLL is enabled */
|
|
mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK));
|
|
mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT));
|
|
mdiv |= ((bestn << DPIO_N_SHIFT));
|
|
mdiv |= (1 << DPIO_K_SHIFT);
|
|
|
|
/*
|
|
* Post divider depends on pixel clock rate, DAC vs digital (and LVDS,
|
|
* but we don't support that).
|
|
* Note: don't use the DAC post divider as it seems unstable.
|
|
*/
|
|
mdiv |= (DPIO_POST_DIV_HDMIDP << DPIO_POST_DIV_SHIFT);
|
|
vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
|
|
|
|
mdiv |= DPIO_ENABLE_CALIBRATION;
|
|
vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
|
|
|
|
/* Set HBR and RBR LPF coefficients */
|
|
if (pipe_config->port_clock == 162000 ||
|
|
intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG) ||
|
|
intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))
|
|
vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
|
|
0x009f0003);
|
|
else
|
|
vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
|
|
0x00d0000f);
|
|
|
|
if (pipe_config->has_dp_encoder) {
|
|
/* Use SSC source */
|
|
if (pipe == PIPE_A)
|
|
vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
|
|
0x0df40000);
|
|
else
|
|
vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
|
|
0x0df70000);
|
|
} else { /* HDMI or VGA */
|
|
/* Use bend source */
|
|
if (pipe == PIPE_A)
|
|
vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
|
|
0x0df70000);
|
|
else
|
|
vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
|
|
0x0df40000);
|
|
}
|
|
|
|
coreclk = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW7(pipe));
|
|
coreclk = (coreclk & 0x0000ff00) | 0x01c00000;
|
|
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
|
|
intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
|
|
coreclk |= 0x01000000;
|
|
vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk);
|
|
|
|
vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000);
|
|
mutex_unlock(&dev_priv->sb_lock);
|
|
}
|
|
|
|
static void chv_compute_dpll(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
pipe_config->dpll_hw_state.dpll = DPLL_SSC_REF_CLK_CHV |
|
|
DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS |
|
|
DPLL_VCO_ENABLE;
|
|
if (crtc->pipe != PIPE_A)
|
|
pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
|
|
|
|
pipe_config->dpll_hw_state.dpll_md =
|
|
(pipe_config->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
|
|
}
|
|
|
|
static void chv_prepare_pll(struct intel_crtc *crtc,
|
|
const struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int pipe = crtc->pipe;
|
|
i915_reg_t dpll_reg = DPLL(crtc->pipe);
|
|
enum dpio_channel port = vlv_pipe_to_channel(pipe);
|
|
u32 loopfilter, tribuf_calcntr;
|
|
u32 bestn, bestm1, bestm2, bestp1, bestp2, bestm2_frac;
|
|
u32 dpio_val;
|
|
int vco;
|
|
|
|
bestn = pipe_config->dpll.n;
|
|
bestm2_frac = pipe_config->dpll.m2 & 0x3fffff;
|
|
bestm1 = pipe_config->dpll.m1;
|
|
bestm2 = pipe_config->dpll.m2 >> 22;
|
|
bestp1 = pipe_config->dpll.p1;
|
|
bestp2 = pipe_config->dpll.p2;
|
|
vco = pipe_config->dpll.vco;
|
|
dpio_val = 0;
|
|
loopfilter = 0;
|
|
|
|
/*
|
|
* Enable Refclk and SSC
|
|
*/
|
|
I915_WRITE(dpll_reg,
|
|
pipe_config->dpll_hw_state.dpll & ~DPLL_VCO_ENABLE);
|
|
|
|
mutex_lock(&dev_priv->sb_lock);
|
|
|
|
/* p1 and p2 divider */
|
|
vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW13(port),
|
|
5 << DPIO_CHV_S1_DIV_SHIFT |
|
|
bestp1 << DPIO_CHV_P1_DIV_SHIFT |
|
|
bestp2 << DPIO_CHV_P2_DIV_SHIFT |
|
|
1 << DPIO_CHV_K_DIV_SHIFT);
|
|
|
|
/* Feedback post-divider - m2 */
|
|
vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW0(port), bestm2);
|
|
|
|
/* Feedback refclk divider - n and m1 */
|
|
vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW1(port),
|
|
DPIO_CHV_M1_DIV_BY_2 |
|
|
1 << DPIO_CHV_N_DIV_SHIFT);
|
|
|
|
/* M2 fraction division */
|
|
vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac);
|
|
|
|
/* M2 fraction division enable */
|
|
dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port));
|
|
dpio_val &= ~(DPIO_CHV_FEEDFWD_GAIN_MASK | DPIO_CHV_FRAC_DIV_EN);
|
|
dpio_val |= (2 << DPIO_CHV_FEEDFWD_GAIN_SHIFT);
|
|
if (bestm2_frac)
|
|
dpio_val |= DPIO_CHV_FRAC_DIV_EN;
|
|
vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW3(port), dpio_val);
|
|
|
|
/* Program digital lock detect threshold */
|
|
dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW9(port));
|
|
dpio_val &= ~(DPIO_CHV_INT_LOCK_THRESHOLD_MASK |
|
|
DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE);
|
|
dpio_val |= (0x5 << DPIO_CHV_INT_LOCK_THRESHOLD_SHIFT);
|
|
if (!bestm2_frac)
|
|
dpio_val |= DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE;
|
|
vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW9(port), dpio_val);
|
|
|
|
/* Loop filter */
|
|
if (vco == 5400000) {
|
|
loopfilter |= (0x3 << DPIO_CHV_PROP_COEFF_SHIFT);
|
|
loopfilter |= (0x8 << DPIO_CHV_INT_COEFF_SHIFT);
|
|
loopfilter |= (0x1 << DPIO_CHV_GAIN_CTRL_SHIFT);
|
|
tribuf_calcntr = 0x9;
|
|
} else if (vco <= 6200000) {
|
|
loopfilter |= (0x5 << DPIO_CHV_PROP_COEFF_SHIFT);
|
|
loopfilter |= (0xB << DPIO_CHV_INT_COEFF_SHIFT);
|
|
loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
|
|
tribuf_calcntr = 0x9;
|
|
} else if (vco <= 6480000) {
|
|
loopfilter |= (0x4 << DPIO_CHV_PROP_COEFF_SHIFT);
|
|
loopfilter |= (0x9 << DPIO_CHV_INT_COEFF_SHIFT);
|
|
loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
|
|
tribuf_calcntr = 0x8;
|
|
} else {
|
|
/* Not supported. Apply the same limits as in the max case */
|
|
loopfilter |= (0x4 << DPIO_CHV_PROP_COEFF_SHIFT);
|
|
loopfilter |= (0x9 << DPIO_CHV_INT_COEFF_SHIFT);
|
|
loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
|
|
tribuf_calcntr = 0;
|
|
}
|
|
vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW6(port), loopfilter);
|
|
|
|
dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW8(port));
|
|
dpio_val &= ~DPIO_CHV_TDC_TARGET_CNT_MASK;
|
|
dpio_val |= (tribuf_calcntr << DPIO_CHV_TDC_TARGET_CNT_SHIFT);
|
|
vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW8(port), dpio_val);
|
|
|
|
/* AFC Recal */
|
|
vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port),
|
|
vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)) |
|
|
DPIO_AFC_RECAL);
|
|
|
|
mutex_unlock(&dev_priv->sb_lock);
|
|
}
|
|
|
|
/**
|
|
* vlv_force_pll_on - forcibly enable just the PLL
|
|
* @dev_priv: i915 private structure
|
|
* @pipe: pipe PLL to enable
|
|
* @dpll: PLL configuration
|
|
*
|
|
* Enable the PLL for @pipe using the supplied @dpll config. To be used
|
|
* in cases where we need the PLL enabled even when @pipe is not going to
|
|
* be enabled.
|
|
*/
|
|
void vlv_force_pll_on(struct drm_device *dev, enum pipe pipe,
|
|
const struct dpll *dpll)
|
|
{
|
|
struct intel_crtc *crtc =
|
|
to_intel_crtc(intel_get_crtc_for_pipe(dev, pipe));
|
|
struct intel_crtc_state pipe_config = {
|
|
.base.crtc = &crtc->base,
|
|
.pixel_multiplier = 1,
|
|
.dpll = *dpll,
|
|
};
|
|
|
|
if (IS_CHERRYVIEW(dev)) {
|
|
chv_compute_dpll(crtc, &pipe_config);
|
|
chv_prepare_pll(crtc, &pipe_config);
|
|
chv_enable_pll(crtc, &pipe_config);
|
|
} else {
|
|
vlv_compute_dpll(crtc, &pipe_config);
|
|
vlv_prepare_pll(crtc, &pipe_config);
|
|
vlv_enable_pll(crtc, &pipe_config);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* vlv_force_pll_off - forcibly disable just the PLL
|
|
* @dev_priv: i915 private structure
|
|
* @pipe: pipe PLL to disable
|
|
*
|
|
* Disable the PLL for @pipe. To be used in cases where we need
|
|
* the PLL enabled even when @pipe is not going to be enabled.
|
|
*/
|
|
void vlv_force_pll_off(struct drm_device *dev, enum pipe pipe)
|
|
{
|
|
if (IS_CHERRYVIEW(dev))
|
|
chv_disable_pll(to_i915(dev), pipe);
|
|
else
|
|
vlv_disable_pll(to_i915(dev), pipe);
|
|
}
|
|
|
|
static void i9xx_compute_dpll(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *crtc_state,
|
|
intel_clock_t *reduced_clock,
|
|
int num_connectors)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 dpll;
|
|
bool is_sdvo;
|
|
struct dpll *clock = &crtc_state->dpll;
|
|
|
|
i9xx_update_pll_dividers(crtc, crtc_state, reduced_clock);
|
|
|
|
is_sdvo = intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_SDVO) ||
|
|
intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_HDMI);
|
|
|
|
dpll = DPLL_VGA_MODE_DIS;
|
|
|
|
if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS))
|
|
dpll |= DPLLB_MODE_LVDS;
|
|
else
|
|
dpll |= DPLLB_MODE_DAC_SERIAL;
|
|
|
|
if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
|
|
dpll |= (crtc_state->pixel_multiplier - 1)
|
|
<< SDVO_MULTIPLIER_SHIFT_HIRES;
|
|
}
|
|
|
|
if (is_sdvo)
|
|
dpll |= DPLL_SDVO_HIGH_SPEED;
|
|
|
|
if (crtc_state->has_dp_encoder)
|
|
dpll |= DPLL_SDVO_HIGH_SPEED;
|
|
|
|
/* compute bitmask from p1 value */
|
|
if (IS_PINEVIEW(dev))
|
|
dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
|
|
else {
|
|
dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
|
|
if (IS_G4X(dev) && reduced_clock)
|
|
dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
|
|
}
|
|
switch (clock->p2) {
|
|
case 5:
|
|
dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
|
|
break;
|
|
case 7:
|
|
dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
|
|
break;
|
|
case 10:
|
|
dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
|
|
break;
|
|
case 14:
|
|
dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
|
|
break;
|
|
}
|
|
if (INTEL_INFO(dev)->gen >= 4)
|
|
dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
|
|
|
|
if (crtc_state->sdvo_tv_clock)
|
|
dpll |= PLL_REF_INPUT_TVCLKINBC;
|
|
else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
|
|
intel_panel_use_ssc(dev_priv) && num_connectors < 2)
|
|
dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
|
|
else
|
|
dpll |= PLL_REF_INPUT_DREFCLK;
|
|
|
|
dpll |= DPLL_VCO_ENABLE;
|
|
crtc_state->dpll_hw_state.dpll = dpll;
|
|
|
|
if (INTEL_INFO(dev)->gen >= 4) {
|
|
u32 dpll_md = (crtc_state->pixel_multiplier - 1)
|
|
<< DPLL_MD_UDI_MULTIPLIER_SHIFT;
|
|
crtc_state->dpll_hw_state.dpll_md = dpll_md;
|
|
}
|
|
}
|
|
|
|
static void i8xx_compute_dpll(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *crtc_state,
|
|
intel_clock_t *reduced_clock,
|
|
int num_connectors)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 dpll;
|
|
struct dpll *clock = &crtc_state->dpll;
|
|
|
|
i9xx_update_pll_dividers(crtc, crtc_state, reduced_clock);
|
|
|
|
dpll = DPLL_VGA_MODE_DIS;
|
|
|
|
if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
|
|
dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
|
|
} else {
|
|
if (clock->p1 == 2)
|
|
dpll |= PLL_P1_DIVIDE_BY_TWO;
|
|
else
|
|
dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
|
|
if (clock->p2 == 4)
|
|
dpll |= PLL_P2_DIVIDE_BY_4;
|
|
}
|
|
|
|
if (!IS_I830(dev) && intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_DVO))
|
|
dpll |= DPLL_DVO_2X_MODE;
|
|
|
|
if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
|
|
intel_panel_use_ssc(dev_priv) && num_connectors < 2)
|
|
dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
|
|
else
|
|
dpll |= PLL_REF_INPUT_DREFCLK;
|
|
|
|
dpll |= DPLL_VCO_ENABLE;
|
|
crtc_state->dpll_hw_state.dpll = dpll;
|
|
}
|
|
|
|
static void intel_set_pipe_timings(struct intel_crtc *intel_crtc)
|
|
{
|
|
struct drm_device *dev = intel_crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
enum pipe pipe = intel_crtc->pipe;
|
|
enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
|
|
const struct drm_display_mode *adjusted_mode = &intel_crtc->config->base.adjusted_mode;
|
|
uint32_t crtc_vtotal, crtc_vblank_end;
|
|
int vsyncshift = 0;
|
|
|
|
/* We need to be careful not to changed the adjusted mode, for otherwise
|
|
* the hw state checker will get angry at the mismatch. */
|
|
crtc_vtotal = adjusted_mode->crtc_vtotal;
|
|
crtc_vblank_end = adjusted_mode->crtc_vblank_end;
|
|
|
|
if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
|
|
/* the chip adds 2 halflines automatically */
|
|
crtc_vtotal -= 1;
|
|
crtc_vblank_end -= 1;
|
|
|
|
if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_SDVO))
|
|
vsyncshift = (adjusted_mode->crtc_htotal - 1) / 2;
|
|
else
|
|
vsyncshift = adjusted_mode->crtc_hsync_start -
|
|
adjusted_mode->crtc_htotal / 2;
|
|
if (vsyncshift < 0)
|
|
vsyncshift += adjusted_mode->crtc_htotal;
|
|
}
|
|
|
|
if (INTEL_INFO(dev)->gen > 3)
|
|
I915_WRITE(VSYNCSHIFT(cpu_transcoder), vsyncshift);
|
|
|
|
I915_WRITE(HTOTAL(cpu_transcoder),
|
|
(adjusted_mode->crtc_hdisplay - 1) |
|
|
((adjusted_mode->crtc_htotal - 1) << 16));
|
|
I915_WRITE(HBLANK(cpu_transcoder),
|
|
(adjusted_mode->crtc_hblank_start - 1) |
|
|
((adjusted_mode->crtc_hblank_end - 1) << 16));
|
|
I915_WRITE(HSYNC(cpu_transcoder),
|
|
(adjusted_mode->crtc_hsync_start - 1) |
|
|
((adjusted_mode->crtc_hsync_end - 1) << 16));
|
|
|
|
I915_WRITE(VTOTAL(cpu_transcoder),
|
|
(adjusted_mode->crtc_vdisplay - 1) |
|
|
((crtc_vtotal - 1) << 16));
|
|
I915_WRITE(VBLANK(cpu_transcoder),
|
|
(adjusted_mode->crtc_vblank_start - 1) |
|
|
((crtc_vblank_end - 1) << 16));
|
|
I915_WRITE(VSYNC(cpu_transcoder),
|
|
(adjusted_mode->crtc_vsync_start - 1) |
|
|
((adjusted_mode->crtc_vsync_end - 1) << 16));
|
|
|
|
/* Workaround: when the EDP input selection is B, the VTOTAL_B must be
|
|
* programmed with the VTOTAL_EDP value. Same for VTOTAL_C. This is
|
|
* documented on the DDI_FUNC_CTL register description, EDP Input Select
|
|
* bits. */
|
|
if (IS_HASWELL(dev) && cpu_transcoder == TRANSCODER_EDP &&
|
|
(pipe == PIPE_B || pipe == PIPE_C))
|
|
I915_WRITE(VTOTAL(pipe), I915_READ(VTOTAL(cpu_transcoder)));
|
|
|
|
/* pipesrc controls the size that is scaled from, which should
|
|
* always be the user's requested size.
|
|
*/
|
|
I915_WRITE(PIPESRC(pipe),
|
|
((intel_crtc->config->pipe_src_w - 1) << 16) |
|
|
(intel_crtc->config->pipe_src_h - 1));
|
|
}
|
|
|
|
static void intel_get_pipe_timings(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
|
|
uint32_t tmp;
|
|
|
|
tmp = I915_READ(HTOTAL(cpu_transcoder));
|
|
pipe_config->base.adjusted_mode.crtc_hdisplay = (tmp & 0xffff) + 1;
|
|
pipe_config->base.adjusted_mode.crtc_htotal = ((tmp >> 16) & 0xffff) + 1;
|
|
tmp = I915_READ(HBLANK(cpu_transcoder));
|
|
pipe_config->base.adjusted_mode.crtc_hblank_start = (tmp & 0xffff) + 1;
|
|
pipe_config->base.adjusted_mode.crtc_hblank_end = ((tmp >> 16) & 0xffff) + 1;
|
|
tmp = I915_READ(HSYNC(cpu_transcoder));
|
|
pipe_config->base.adjusted_mode.crtc_hsync_start = (tmp & 0xffff) + 1;
|
|
pipe_config->base.adjusted_mode.crtc_hsync_end = ((tmp >> 16) & 0xffff) + 1;
|
|
|
|
tmp = I915_READ(VTOTAL(cpu_transcoder));
|
|
pipe_config->base.adjusted_mode.crtc_vdisplay = (tmp & 0xffff) + 1;
|
|
pipe_config->base.adjusted_mode.crtc_vtotal = ((tmp >> 16) & 0xffff) + 1;
|
|
tmp = I915_READ(VBLANK(cpu_transcoder));
|
|
pipe_config->base.adjusted_mode.crtc_vblank_start = (tmp & 0xffff) + 1;
|
|
pipe_config->base.adjusted_mode.crtc_vblank_end = ((tmp >> 16) & 0xffff) + 1;
|
|
tmp = I915_READ(VSYNC(cpu_transcoder));
|
|
pipe_config->base.adjusted_mode.crtc_vsync_start = (tmp & 0xffff) + 1;
|
|
pipe_config->base.adjusted_mode.crtc_vsync_end = ((tmp >> 16) & 0xffff) + 1;
|
|
|
|
if (I915_READ(PIPECONF(cpu_transcoder)) & PIPECONF_INTERLACE_MASK) {
|
|
pipe_config->base.adjusted_mode.flags |= DRM_MODE_FLAG_INTERLACE;
|
|
pipe_config->base.adjusted_mode.crtc_vtotal += 1;
|
|
pipe_config->base.adjusted_mode.crtc_vblank_end += 1;
|
|
}
|
|
|
|
tmp = I915_READ(PIPESRC(crtc->pipe));
|
|
pipe_config->pipe_src_h = (tmp & 0xffff) + 1;
|
|
pipe_config->pipe_src_w = ((tmp >> 16) & 0xffff) + 1;
|
|
|
|
pipe_config->base.mode.vdisplay = pipe_config->pipe_src_h;
|
|
pipe_config->base.mode.hdisplay = pipe_config->pipe_src_w;
|
|
}
|
|
|
|
void intel_mode_from_pipe_config(struct drm_display_mode *mode,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
mode->hdisplay = pipe_config->base.adjusted_mode.crtc_hdisplay;
|
|
mode->htotal = pipe_config->base.adjusted_mode.crtc_htotal;
|
|
mode->hsync_start = pipe_config->base.adjusted_mode.crtc_hsync_start;
|
|
mode->hsync_end = pipe_config->base.adjusted_mode.crtc_hsync_end;
|
|
|
|
mode->vdisplay = pipe_config->base.adjusted_mode.crtc_vdisplay;
|
|
mode->vtotal = pipe_config->base.adjusted_mode.crtc_vtotal;
|
|
mode->vsync_start = pipe_config->base.adjusted_mode.crtc_vsync_start;
|
|
mode->vsync_end = pipe_config->base.adjusted_mode.crtc_vsync_end;
|
|
|
|
mode->flags = pipe_config->base.adjusted_mode.flags;
|
|
mode->type = DRM_MODE_TYPE_DRIVER;
|
|
|
|
mode->clock = pipe_config->base.adjusted_mode.crtc_clock;
|
|
mode->flags |= pipe_config->base.adjusted_mode.flags;
|
|
|
|
mode->hsync = drm_mode_hsync(mode);
|
|
mode->vrefresh = drm_mode_vrefresh(mode);
|
|
drm_mode_set_name(mode);
|
|
}
|
|
|
|
static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc)
|
|
{
|
|
struct drm_device *dev = intel_crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t pipeconf;
|
|
|
|
pipeconf = 0;
|
|
|
|
if ((intel_crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
|
|
(intel_crtc->pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
|
|
pipeconf |= I915_READ(PIPECONF(intel_crtc->pipe)) & PIPECONF_ENABLE;
|
|
|
|
if (intel_crtc->config->double_wide)
|
|
pipeconf |= PIPECONF_DOUBLE_WIDE;
|
|
|
|
/* only g4x and later have fancy bpc/dither controls */
|
|
if (IS_G4X(dev) || IS_VALLEYVIEW(dev)) {
|
|
/* Bspec claims that we can't use dithering for 30bpp pipes. */
|
|
if (intel_crtc->config->dither && intel_crtc->config->pipe_bpp != 30)
|
|
pipeconf |= PIPECONF_DITHER_EN |
|
|
PIPECONF_DITHER_TYPE_SP;
|
|
|
|
switch (intel_crtc->config->pipe_bpp) {
|
|
case 18:
|
|
pipeconf |= PIPECONF_6BPC;
|
|
break;
|
|
case 24:
|
|
pipeconf |= PIPECONF_8BPC;
|
|
break;
|
|
case 30:
|
|
pipeconf |= PIPECONF_10BPC;
|
|
break;
|
|
default:
|
|
/* Case prevented by intel_choose_pipe_bpp_dither. */
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
if (HAS_PIPE_CXSR(dev)) {
|
|
if (intel_crtc->lowfreq_avail) {
|
|
DRM_DEBUG_KMS("enabling CxSR downclocking\n");
|
|
pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
|
|
} else {
|
|
DRM_DEBUG_KMS("disabling CxSR downclocking\n");
|
|
}
|
|
}
|
|
|
|
if (intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) {
|
|
if (INTEL_INFO(dev)->gen < 4 ||
|
|
intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_SDVO))
|
|
pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
|
|
else
|
|
pipeconf |= PIPECONF_INTERLACE_W_SYNC_SHIFT;
|
|
} else
|
|
pipeconf |= PIPECONF_PROGRESSIVE;
|
|
|
|
if (IS_VALLEYVIEW(dev) && intel_crtc->config->limited_color_range)
|
|
pipeconf |= PIPECONF_COLOR_RANGE_SELECT;
|
|
|
|
I915_WRITE(PIPECONF(intel_crtc->pipe), pipeconf);
|
|
POSTING_READ(PIPECONF(intel_crtc->pipe));
|
|
}
|
|
|
|
static int i9xx_crtc_compute_clock(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int refclk, num_connectors = 0;
|
|
intel_clock_t clock;
|
|
bool ok;
|
|
bool is_dsi = false;
|
|
struct intel_encoder *encoder;
|
|
const intel_limit_t *limit;
|
|
struct drm_atomic_state *state = crtc_state->base.state;
|
|
struct drm_connector *connector;
|
|
struct drm_connector_state *connector_state;
|
|
int i;
|
|
|
|
memset(&crtc_state->dpll_hw_state, 0,
|
|
sizeof(crtc_state->dpll_hw_state));
|
|
|
|
for_each_connector_in_state(state, connector, connector_state, i) {
|
|
if (connector_state->crtc != &crtc->base)
|
|
continue;
|
|
|
|
encoder = to_intel_encoder(connector_state->best_encoder);
|
|
|
|
switch (encoder->type) {
|
|
case INTEL_OUTPUT_DSI:
|
|
is_dsi = true;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
num_connectors++;
|
|
}
|
|
|
|
if (is_dsi)
|
|
return 0;
|
|
|
|
if (!crtc_state->clock_set) {
|
|
refclk = i9xx_get_refclk(crtc_state, num_connectors);
|
|
|
|
/*
|
|
* Returns a set of divisors for the desired target clock with
|
|
* the given refclk, or FALSE. The returned values represent
|
|
* the clock equation: reflck * (5 * (m1 + 2) + (m2 + 2)) / (n +
|
|
* 2) / p1 / p2.
|
|
*/
|
|
limit = intel_limit(crtc_state, refclk);
|
|
ok = dev_priv->display.find_dpll(limit, crtc_state,
|
|
crtc_state->port_clock,
|
|
refclk, NULL, &clock);
|
|
if (!ok) {
|
|
DRM_ERROR("Couldn't find PLL settings for mode!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Compat-code for transition, will disappear. */
|
|
crtc_state->dpll.n = clock.n;
|
|
crtc_state->dpll.m1 = clock.m1;
|
|
crtc_state->dpll.m2 = clock.m2;
|
|
crtc_state->dpll.p1 = clock.p1;
|
|
crtc_state->dpll.p2 = clock.p2;
|
|
}
|
|
|
|
if (IS_GEN2(dev)) {
|
|
i8xx_compute_dpll(crtc, crtc_state, NULL,
|
|
num_connectors);
|
|
} else if (IS_CHERRYVIEW(dev)) {
|
|
chv_compute_dpll(crtc, crtc_state);
|
|
} else if (IS_VALLEYVIEW(dev)) {
|
|
vlv_compute_dpll(crtc, crtc_state);
|
|
} else {
|
|
i9xx_compute_dpll(crtc, crtc_state, NULL,
|
|
num_connectors);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void i9xx_get_pfit_config(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t tmp;
|
|
|
|
if (INTEL_INFO(dev)->gen <= 3 && (IS_I830(dev) || !IS_MOBILE(dev)))
|
|
return;
|
|
|
|
tmp = I915_READ(PFIT_CONTROL);
|
|
if (!(tmp & PFIT_ENABLE))
|
|
return;
|
|
|
|
/* Check whether the pfit is attached to our pipe. */
|
|
if (INTEL_INFO(dev)->gen < 4) {
|
|
if (crtc->pipe != PIPE_B)
|
|
return;
|
|
} else {
|
|
if ((tmp & PFIT_PIPE_MASK) != (crtc->pipe << PFIT_PIPE_SHIFT))
|
|
return;
|
|
}
|
|
|
|
pipe_config->gmch_pfit.control = tmp;
|
|
pipe_config->gmch_pfit.pgm_ratios = I915_READ(PFIT_PGM_RATIOS);
|
|
if (INTEL_INFO(dev)->gen < 5)
|
|
pipe_config->gmch_pfit.lvds_border_bits =
|
|
I915_READ(LVDS) & LVDS_BORDER_ENABLE;
|
|
}
|
|
|
|
static void vlv_crtc_clock_get(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int pipe = pipe_config->cpu_transcoder;
|
|
intel_clock_t clock;
|
|
u32 mdiv;
|
|
int refclk = 100000;
|
|
|
|
/* In case of MIPI DPLL will not even be used */
|
|
if (!(pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE))
|
|
return;
|
|
|
|
mutex_lock(&dev_priv->sb_lock);
|
|
mdiv = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW3(pipe));
|
|
mutex_unlock(&dev_priv->sb_lock);
|
|
|
|
clock.m1 = (mdiv >> DPIO_M1DIV_SHIFT) & 7;
|
|
clock.m2 = mdiv & DPIO_M2DIV_MASK;
|
|
clock.n = (mdiv >> DPIO_N_SHIFT) & 0xf;
|
|
clock.p1 = (mdiv >> DPIO_P1_SHIFT) & 7;
|
|
clock.p2 = (mdiv >> DPIO_P2_SHIFT) & 0x1f;
|
|
|
|
pipe_config->port_clock = vlv_calc_dpll_params(refclk, &clock);
|
|
}
|
|
|
|
static void
|
|
i9xx_get_initial_plane_config(struct intel_crtc *crtc,
|
|
struct intel_initial_plane_config *plane_config)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 val, base, offset;
|
|
int pipe = crtc->pipe, plane = crtc->plane;
|
|
int fourcc, pixel_format;
|
|
unsigned int aligned_height;
|
|
struct drm_framebuffer *fb;
|
|
struct intel_framebuffer *intel_fb;
|
|
|
|
val = I915_READ(DSPCNTR(plane));
|
|
if (!(val & DISPLAY_PLANE_ENABLE))
|
|
return;
|
|
|
|
intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
|
|
if (!intel_fb) {
|
|
DRM_DEBUG_KMS("failed to alloc fb\n");
|
|
return;
|
|
}
|
|
|
|
fb = &intel_fb->base;
|
|
|
|
if (INTEL_INFO(dev)->gen >= 4) {
|
|
if (val & DISPPLANE_TILED) {
|
|
plane_config->tiling = I915_TILING_X;
|
|
fb->modifier[0] = I915_FORMAT_MOD_X_TILED;
|
|
}
|
|
}
|
|
|
|
pixel_format = val & DISPPLANE_PIXFORMAT_MASK;
|
|
fourcc = i9xx_format_to_fourcc(pixel_format);
|
|
fb->pixel_format = fourcc;
|
|
fb->bits_per_pixel = drm_format_plane_cpp(fourcc, 0) * 8;
|
|
|
|
if (INTEL_INFO(dev)->gen >= 4) {
|
|
if (plane_config->tiling)
|
|
offset = I915_READ(DSPTILEOFF(plane));
|
|
else
|
|
offset = I915_READ(DSPLINOFF(plane));
|
|
base = I915_READ(DSPSURF(plane)) & 0xfffff000;
|
|
} else {
|
|
base = I915_READ(DSPADDR(plane));
|
|
}
|
|
plane_config->base = base;
|
|
|
|
val = I915_READ(PIPESRC(pipe));
|
|
fb->width = ((val >> 16) & 0xfff) + 1;
|
|
fb->height = ((val >> 0) & 0xfff) + 1;
|
|
|
|
val = I915_READ(DSPSTRIDE(pipe));
|
|
fb->pitches[0] = val & 0xffffffc0;
|
|
|
|
aligned_height = intel_fb_align_height(dev, fb->height,
|
|
fb->pixel_format,
|
|
fb->modifier[0]);
|
|
|
|
plane_config->size = fb->pitches[0] * aligned_height;
|
|
|
|
DRM_DEBUG_KMS("pipe/plane %c/%d with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
|
|
pipe_name(pipe), plane, fb->width, fb->height,
|
|
fb->bits_per_pixel, base, fb->pitches[0],
|
|
plane_config->size);
|
|
|
|
plane_config->fb = intel_fb;
|
|
}
|
|
|
|
static void chv_crtc_clock_get(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int pipe = pipe_config->cpu_transcoder;
|
|
enum dpio_channel port = vlv_pipe_to_channel(pipe);
|
|
intel_clock_t clock;
|
|
u32 cmn_dw13, pll_dw0, pll_dw1, pll_dw2, pll_dw3;
|
|
int refclk = 100000;
|
|
|
|
mutex_lock(&dev_priv->sb_lock);
|
|
cmn_dw13 = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW13(port));
|
|
pll_dw0 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW0(port));
|
|
pll_dw1 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW1(port));
|
|
pll_dw2 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW2(port));
|
|
pll_dw3 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port));
|
|
mutex_unlock(&dev_priv->sb_lock);
|
|
|
|
clock.m1 = (pll_dw1 & 0x7) == DPIO_CHV_M1_DIV_BY_2 ? 2 : 0;
|
|
clock.m2 = (pll_dw0 & 0xff) << 22;
|
|
if (pll_dw3 & DPIO_CHV_FRAC_DIV_EN)
|
|
clock.m2 |= pll_dw2 & 0x3fffff;
|
|
clock.n = (pll_dw1 >> DPIO_CHV_N_DIV_SHIFT) & 0xf;
|
|
clock.p1 = (cmn_dw13 >> DPIO_CHV_P1_DIV_SHIFT) & 0x7;
|
|
clock.p2 = (cmn_dw13 >> DPIO_CHV_P2_DIV_SHIFT) & 0x1f;
|
|
|
|
pipe_config->port_clock = chv_calc_dpll_params(refclk, &clock);
|
|
}
|
|
|
|
static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t tmp;
|
|
|
|
if (!intel_display_power_is_enabled(dev_priv,
|
|
POWER_DOMAIN_PIPE(crtc->pipe)))
|
|
return false;
|
|
|
|
pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
|
|
pipe_config->shared_dpll = DPLL_ID_PRIVATE;
|
|
|
|
tmp = I915_READ(PIPECONF(crtc->pipe));
|
|
if (!(tmp & PIPECONF_ENABLE))
|
|
return false;
|
|
|
|
if (IS_G4X(dev) || IS_VALLEYVIEW(dev)) {
|
|
switch (tmp & PIPECONF_BPC_MASK) {
|
|
case PIPECONF_6BPC:
|
|
pipe_config->pipe_bpp = 18;
|
|
break;
|
|
case PIPECONF_8BPC:
|
|
pipe_config->pipe_bpp = 24;
|
|
break;
|
|
case PIPECONF_10BPC:
|
|
pipe_config->pipe_bpp = 30;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (IS_VALLEYVIEW(dev) && (tmp & PIPECONF_COLOR_RANGE_SELECT))
|
|
pipe_config->limited_color_range = true;
|
|
|
|
if (INTEL_INFO(dev)->gen < 4)
|
|
pipe_config->double_wide = tmp & PIPECONF_DOUBLE_WIDE;
|
|
|
|
intel_get_pipe_timings(crtc, pipe_config);
|
|
|
|
i9xx_get_pfit_config(crtc, pipe_config);
|
|
|
|
if (INTEL_INFO(dev)->gen >= 4) {
|
|
tmp = I915_READ(DPLL_MD(crtc->pipe));
|
|
pipe_config->pixel_multiplier =
|
|
((tmp & DPLL_MD_UDI_MULTIPLIER_MASK)
|
|
>> DPLL_MD_UDI_MULTIPLIER_SHIFT) + 1;
|
|
pipe_config->dpll_hw_state.dpll_md = tmp;
|
|
} else if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
|
|
tmp = I915_READ(DPLL(crtc->pipe));
|
|
pipe_config->pixel_multiplier =
|
|
((tmp & SDVO_MULTIPLIER_MASK)
|
|
>> SDVO_MULTIPLIER_SHIFT_HIRES) + 1;
|
|
} else {
|
|
/* Note that on i915G/GM the pixel multiplier is in the sdvo
|
|
* port and will be fixed up in the encoder->get_config
|
|
* function. */
|
|
pipe_config->pixel_multiplier = 1;
|
|
}
|
|
pipe_config->dpll_hw_state.dpll = I915_READ(DPLL(crtc->pipe));
|
|
if (!IS_VALLEYVIEW(dev)) {
|
|
/*
|
|
* DPLL_DVO_2X_MODE must be enabled for both DPLLs
|
|
* on 830. Filter it out here so that we don't
|
|
* report errors due to that.
|
|
*/
|
|
if (IS_I830(dev))
|
|
pipe_config->dpll_hw_state.dpll &= ~DPLL_DVO_2X_MODE;
|
|
|
|
pipe_config->dpll_hw_state.fp0 = I915_READ(FP0(crtc->pipe));
|
|
pipe_config->dpll_hw_state.fp1 = I915_READ(FP1(crtc->pipe));
|
|
} else {
|
|
/* Mask out read-only status bits. */
|
|
pipe_config->dpll_hw_state.dpll &= ~(DPLL_LOCK_VLV |
|
|
DPLL_PORTC_READY_MASK |
|
|
DPLL_PORTB_READY_MASK);
|
|
}
|
|
|
|
if (IS_CHERRYVIEW(dev))
|
|
chv_crtc_clock_get(crtc, pipe_config);
|
|
else if (IS_VALLEYVIEW(dev))
|
|
vlv_crtc_clock_get(crtc, pipe_config);
|
|
else
|
|
i9xx_crtc_clock_get(crtc, pipe_config);
|
|
|
|
/*
|
|
* Normally the dotclock is filled in by the encoder .get_config()
|
|
* but in case the pipe is enabled w/o any ports we need a sane
|
|
* default.
|
|
*/
|
|
pipe_config->base.adjusted_mode.crtc_clock =
|
|
pipe_config->port_clock / pipe_config->pixel_multiplier;
|
|
|
|
return true;
|
|
}
|
|
|
|
static void ironlake_init_pch_refclk(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_encoder *encoder;
|
|
u32 val, final;
|
|
bool has_lvds = false;
|
|
bool has_cpu_edp = false;
|
|
bool has_panel = false;
|
|
bool has_ck505 = false;
|
|
bool can_ssc = false;
|
|
|
|
/* We need to take the global config into account */
|
|
for_each_intel_encoder(dev, encoder) {
|
|
switch (encoder->type) {
|
|
case INTEL_OUTPUT_LVDS:
|
|
has_panel = true;
|
|
has_lvds = true;
|
|
break;
|
|
case INTEL_OUTPUT_EDP:
|
|
has_panel = true;
|
|
if (enc_to_dig_port(&encoder->base)->port == PORT_A)
|
|
has_cpu_edp = true;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (HAS_PCH_IBX(dev)) {
|
|
has_ck505 = dev_priv->vbt.display_clock_mode;
|
|
can_ssc = has_ck505;
|
|
} else {
|
|
has_ck505 = false;
|
|
can_ssc = true;
|
|
}
|
|
|
|
DRM_DEBUG_KMS("has_panel %d has_lvds %d has_ck505 %d\n",
|
|
has_panel, has_lvds, has_ck505);
|
|
|
|
/* Ironlake: try to setup display ref clock before DPLL
|
|
* enabling. This is only under driver's control after
|
|
* PCH B stepping, previous chipset stepping should be
|
|
* ignoring this setting.
|
|
*/
|
|
val = I915_READ(PCH_DREF_CONTROL);
|
|
|
|
/* As we must carefully and slowly disable/enable each source in turn,
|
|
* compute the final state we want first and check if we need to
|
|
* make any changes at all.
|
|
*/
|
|
final = val;
|
|
final &= ~DREF_NONSPREAD_SOURCE_MASK;
|
|
if (has_ck505)
|
|
final |= DREF_NONSPREAD_CK505_ENABLE;
|
|
else
|
|
final |= DREF_NONSPREAD_SOURCE_ENABLE;
|
|
|
|
final &= ~DREF_SSC_SOURCE_MASK;
|
|
final &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
|
|
final &= ~DREF_SSC1_ENABLE;
|
|
|
|
if (has_panel) {
|
|
final |= DREF_SSC_SOURCE_ENABLE;
|
|
|
|
if (intel_panel_use_ssc(dev_priv) && can_ssc)
|
|
final |= DREF_SSC1_ENABLE;
|
|
|
|
if (has_cpu_edp) {
|
|
if (intel_panel_use_ssc(dev_priv) && can_ssc)
|
|
final |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
|
|
else
|
|
final |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
|
|
} else
|
|
final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
|
|
} else {
|
|
final |= DREF_SSC_SOURCE_DISABLE;
|
|
final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
|
|
}
|
|
|
|
if (final == val)
|
|
return;
|
|
|
|
/* Always enable nonspread source */
|
|
val &= ~DREF_NONSPREAD_SOURCE_MASK;
|
|
|
|
if (has_ck505)
|
|
val |= DREF_NONSPREAD_CK505_ENABLE;
|
|
else
|
|
val |= DREF_NONSPREAD_SOURCE_ENABLE;
|
|
|
|
if (has_panel) {
|
|
val &= ~DREF_SSC_SOURCE_MASK;
|
|
val |= DREF_SSC_SOURCE_ENABLE;
|
|
|
|
/* SSC must be turned on before enabling the CPU output */
|
|
if (intel_panel_use_ssc(dev_priv) && can_ssc) {
|
|
DRM_DEBUG_KMS("Using SSC on panel\n");
|
|
val |= DREF_SSC1_ENABLE;
|
|
} else
|
|
val &= ~DREF_SSC1_ENABLE;
|
|
|
|
/* Get SSC going before enabling the outputs */
|
|
I915_WRITE(PCH_DREF_CONTROL, val);
|
|
POSTING_READ(PCH_DREF_CONTROL);
|
|
udelay(200);
|
|
|
|
val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
|
|
|
|
/* Enable CPU source on CPU attached eDP */
|
|
if (has_cpu_edp) {
|
|
if (intel_panel_use_ssc(dev_priv) && can_ssc) {
|
|
DRM_DEBUG_KMS("Using SSC on eDP\n");
|
|
val |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
|
|
} else
|
|
val |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
|
|
} else
|
|
val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
|
|
|
|
I915_WRITE(PCH_DREF_CONTROL, val);
|
|
POSTING_READ(PCH_DREF_CONTROL);
|
|
udelay(200);
|
|
} else {
|
|
DRM_DEBUG_KMS("Disabling SSC entirely\n");
|
|
|
|
val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
|
|
|
|
/* Turn off CPU output */
|
|
val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
|
|
|
|
I915_WRITE(PCH_DREF_CONTROL, val);
|
|
POSTING_READ(PCH_DREF_CONTROL);
|
|
udelay(200);
|
|
|
|
/* Turn off the SSC source */
|
|
val &= ~DREF_SSC_SOURCE_MASK;
|
|
val |= DREF_SSC_SOURCE_DISABLE;
|
|
|
|
/* Turn off SSC1 */
|
|
val &= ~DREF_SSC1_ENABLE;
|
|
|
|
I915_WRITE(PCH_DREF_CONTROL, val);
|
|
POSTING_READ(PCH_DREF_CONTROL);
|
|
udelay(200);
|
|
}
|
|
|
|
BUG_ON(val != final);
|
|
}
|
|
|
|
static void lpt_reset_fdi_mphy(struct drm_i915_private *dev_priv)
|
|
{
|
|
uint32_t tmp;
|
|
|
|
tmp = I915_READ(SOUTH_CHICKEN2);
|
|
tmp |= FDI_MPHY_IOSFSB_RESET_CTL;
|
|
I915_WRITE(SOUTH_CHICKEN2, tmp);
|
|
|
|
if (wait_for_atomic_us(I915_READ(SOUTH_CHICKEN2) &
|
|
FDI_MPHY_IOSFSB_RESET_STATUS, 100))
|
|
DRM_ERROR("FDI mPHY reset assert timeout\n");
|
|
|
|
tmp = I915_READ(SOUTH_CHICKEN2);
|
|
tmp &= ~FDI_MPHY_IOSFSB_RESET_CTL;
|
|
I915_WRITE(SOUTH_CHICKEN2, tmp);
|
|
|
|
if (wait_for_atomic_us((I915_READ(SOUTH_CHICKEN2) &
|
|
FDI_MPHY_IOSFSB_RESET_STATUS) == 0, 100))
|
|
DRM_ERROR("FDI mPHY reset de-assert timeout\n");
|
|
}
|
|
|
|
/* WaMPhyProgramming:hsw */
|
|
static void lpt_program_fdi_mphy(struct drm_i915_private *dev_priv)
|
|
{
|
|
uint32_t tmp;
|
|
|
|
tmp = intel_sbi_read(dev_priv, 0x8008, SBI_MPHY);
|
|
tmp &= ~(0xFF << 24);
|
|
tmp |= (0x12 << 24);
|
|
intel_sbi_write(dev_priv, 0x8008, tmp, SBI_MPHY);
|
|
|
|
tmp = intel_sbi_read(dev_priv, 0x2008, SBI_MPHY);
|
|
tmp |= (1 << 11);
|
|
intel_sbi_write(dev_priv, 0x2008, tmp, SBI_MPHY);
|
|
|
|
tmp = intel_sbi_read(dev_priv, 0x2108, SBI_MPHY);
|
|
tmp |= (1 << 11);
|
|
intel_sbi_write(dev_priv, 0x2108, tmp, SBI_MPHY);
|
|
|
|
tmp = intel_sbi_read(dev_priv, 0x206C, SBI_MPHY);
|
|
tmp |= (1 << 24) | (1 << 21) | (1 << 18);
|
|
intel_sbi_write(dev_priv, 0x206C, tmp, SBI_MPHY);
|
|
|
|
tmp = intel_sbi_read(dev_priv, 0x216C, SBI_MPHY);
|
|
tmp |= (1 << 24) | (1 << 21) | (1 << 18);
|
|
intel_sbi_write(dev_priv, 0x216C, tmp, SBI_MPHY);
|
|
|
|
tmp = intel_sbi_read(dev_priv, 0x2080, SBI_MPHY);
|
|
tmp &= ~(7 << 13);
|
|
tmp |= (5 << 13);
|
|
intel_sbi_write(dev_priv, 0x2080, tmp, SBI_MPHY);
|
|
|
|
tmp = intel_sbi_read(dev_priv, 0x2180, SBI_MPHY);
|
|
tmp &= ~(7 << 13);
|
|
tmp |= (5 << 13);
|
|
intel_sbi_write(dev_priv, 0x2180, tmp, SBI_MPHY);
|
|
|
|
tmp = intel_sbi_read(dev_priv, 0x208C, SBI_MPHY);
|
|
tmp &= ~0xFF;
|
|
tmp |= 0x1C;
|
|
intel_sbi_write(dev_priv, 0x208C, tmp, SBI_MPHY);
|
|
|
|
tmp = intel_sbi_read(dev_priv, 0x218C, SBI_MPHY);
|
|
tmp &= ~0xFF;
|
|
tmp |= 0x1C;
|
|
intel_sbi_write(dev_priv, 0x218C, tmp, SBI_MPHY);
|
|
|
|
tmp = intel_sbi_read(dev_priv, 0x2098, SBI_MPHY);
|
|
tmp &= ~(0xFF << 16);
|
|
tmp |= (0x1C << 16);
|
|
intel_sbi_write(dev_priv, 0x2098, tmp, SBI_MPHY);
|
|
|
|
tmp = intel_sbi_read(dev_priv, 0x2198, SBI_MPHY);
|
|
tmp &= ~(0xFF << 16);
|
|
tmp |= (0x1C << 16);
|
|
intel_sbi_write(dev_priv, 0x2198, tmp, SBI_MPHY);
|
|
|
|
tmp = intel_sbi_read(dev_priv, 0x20C4, SBI_MPHY);
|
|
tmp |= (1 << 27);
|
|
intel_sbi_write(dev_priv, 0x20C4, tmp, SBI_MPHY);
|
|
|
|
tmp = intel_sbi_read(dev_priv, 0x21C4, SBI_MPHY);
|
|
tmp |= (1 << 27);
|
|
intel_sbi_write(dev_priv, 0x21C4, tmp, SBI_MPHY);
|
|
|
|
tmp = intel_sbi_read(dev_priv, 0x20EC, SBI_MPHY);
|
|
tmp &= ~(0xF << 28);
|
|
tmp |= (4 << 28);
|
|
intel_sbi_write(dev_priv, 0x20EC, tmp, SBI_MPHY);
|
|
|
|
tmp = intel_sbi_read(dev_priv, 0x21EC, SBI_MPHY);
|
|
tmp &= ~(0xF << 28);
|
|
tmp |= (4 << 28);
|
|
intel_sbi_write(dev_priv, 0x21EC, tmp, SBI_MPHY);
|
|
}
|
|
|
|
/* Implements 3 different sequences from BSpec chapter "Display iCLK
|
|
* Programming" based on the parameters passed:
|
|
* - Sequence to enable CLKOUT_DP
|
|
* - Sequence to enable CLKOUT_DP without spread
|
|
* - Sequence to enable CLKOUT_DP for FDI usage and configure PCH FDI I/O
|
|
*/
|
|
static void lpt_enable_clkout_dp(struct drm_device *dev, bool with_spread,
|
|
bool with_fdi)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t reg, tmp;
|
|
|
|
if (WARN(with_fdi && !with_spread, "FDI requires downspread\n"))
|
|
with_spread = true;
|
|
if (WARN(HAS_PCH_LPT_LP(dev) && with_fdi, "LP PCH doesn't have FDI\n"))
|
|
with_fdi = false;
|
|
|
|
mutex_lock(&dev_priv->sb_lock);
|
|
|
|
tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
|
|
tmp &= ~SBI_SSCCTL_DISABLE;
|
|
tmp |= SBI_SSCCTL_PATHALT;
|
|
intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
|
|
|
|
udelay(24);
|
|
|
|
if (with_spread) {
|
|
tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
|
|
tmp &= ~SBI_SSCCTL_PATHALT;
|
|
intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
|
|
|
|
if (with_fdi) {
|
|
lpt_reset_fdi_mphy(dev_priv);
|
|
lpt_program_fdi_mphy(dev_priv);
|
|
}
|
|
}
|
|
|
|
reg = HAS_PCH_LPT_LP(dev) ? SBI_GEN0 : SBI_DBUFF0;
|
|
tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
|
|
tmp |= SBI_GEN0_CFG_BUFFENABLE_DISABLE;
|
|
intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
|
|
|
|
mutex_unlock(&dev_priv->sb_lock);
|
|
}
|
|
|
|
/* Sequence to disable CLKOUT_DP */
|
|
static void lpt_disable_clkout_dp(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t reg, tmp;
|
|
|
|
mutex_lock(&dev_priv->sb_lock);
|
|
|
|
reg = HAS_PCH_LPT_LP(dev) ? SBI_GEN0 : SBI_DBUFF0;
|
|
tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
|
|
tmp &= ~SBI_GEN0_CFG_BUFFENABLE_DISABLE;
|
|
intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
|
|
|
|
tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
|
|
if (!(tmp & SBI_SSCCTL_DISABLE)) {
|
|
if (!(tmp & SBI_SSCCTL_PATHALT)) {
|
|
tmp |= SBI_SSCCTL_PATHALT;
|
|
intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
|
|
udelay(32);
|
|
}
|
|
tmp |= SBI_SSCCTL_DISABLE;
|
|
intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
|
|
}
|
|
|
|
mutex_unlock(&dev_priv->sb_lock);
|
|
}
|
|
|
|
static void lpt_init_pch_refclk(struct drm_device *dev)
|
|
{
|
|
struct intel_encoder *encoder;
|
|
bool has_vga = false;
|
|
|
|
for_each_intel_encoder(dev, encoder) {
|
|
switch (encoder->type) {
|
|
case INTEL_OUTPUT_ANALOG:
|
|
has_vga = true;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (has_vga)
|
|
lpt_enable_clkout_dp(dev, true, true);
|
|
else
|
|
lpt_disable_clkout_dp(dev);
|
|
}
|
|
|
|
/*
|
|
* Initialize reference clocks when the driver loads
|
|
*/
|
|
void intel_init_pch_refclk(struct drm_device *dev)
|
|
{
|
|
if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
|
|
ironlake_init_pch_refclk(dev);
|
|
else if (HAS_PCH_LPT(dev))
|
|
lpt_init_pch_refclk(dev);
|
|
}
|
|
|
|
static int ironlake_get_refclk(struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct drm_device *dev = crtc_state->base.crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_atomic_state *state = crtc_state->base.state;
|
|
struct drm_connector *connector;
|
|
struct drm_connector_state *connector_state;
|
|
struct intel_encoder *encoder;
|
|
int num_connectors = 0, i;
|
|
bool is_lvds = false;
|
|
|
|
for_each_connector_in_state(state, connector, connector_state, i) {
|
|
if (connector_state->crtc != crtc_state->base.crtc)
|
|
continue;
|
|
|
|
encoder = to_intel_encoder(connector_state->best_encoder);
|
|
|
|
switch (encoder->type) {
|
|
case INTEL_OUTPUT_LVDS:
|
|
is_lvds = true;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
num_connectors++;
|
|
}
|
|
|
|
if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
|
|
DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n",
|
|
dev_priv->vbt.lvds_ssc_freq);
|
|
return dev_priv->vbt.lvds_ssc_freq;
|
|
}
|
|
|
|
return 120000;
|
|
}
|
|
|
|
static void ironlake_set_pipeconf(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_i915_private *dev_priv = crtc->dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
uint32_t val;
|
|
|
|
val = 0;
|
|
|
|
switch (intel_crtc->config->pipe_bpp) {
|
|
case 18:
|
|
val |= PIPECONF_6BPC;
|
|
break;
|
|
case 24:
|
|
val |= PIPECONF_8BPC;
|
|
break;
|
|
case 30:
|
|
val |= PIPECONF_10BPC;
|
|
break;
|
|
case 36:
|
|
val |= PIPECONF_12BPC;
|
|
break;
|
|
default:
|
|
/* Case prevented by intel_choose_pipe_bpp_dither. */
|
|
BUG();
|
|
}
|
|
|
|
if (intel_crtc->config->dither)
|
|
val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
|
|
|
|
if (intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
|
|
val |= PIPECONF_INTERLACED_ILK;
|
|
else
|
|
val |= PIPECONF_PROGRESSIVE;
|
|
|
|
if (intel_crtc->config->limited_color_range)
|
|
val |= PIPECONF_COLOR_RANGE_SELECT;
|
|
|
|
I915_WRITE(PIPECONF(pipe), val);
|
|
POSTING_READ(PIPECONF(pipe));
|
|
}
|
|
|
|
/*
|
|
* Set up the pipe CSC unit.
|
|
*
|
|
* Currently only full range RGB to limited range RGB conversion
|
|
* is supported, but eventually this should handle various
|
|
* RGB<->YCbCr scenarios as well.
|
|
*/
|
|
static void intel_set_pipe_csc(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
uint16_t coeff = 0x7800; /* 1.0 */
|
|
|
|
/*
|
|
* TODO: Check what kind of values actually come out of the pipe
|
|
* with these coeff/postoff values and adjust to get the best
|
|
* accuracy. Perhaps we even need to take the bpc value into
|
|
* consideration.
|
|
*/
|
|
|
|
if (intel_crtc->config->limited_color_range)
|
|
coeff = ((235 - 16) * (1 << 12) / 255) & 0xff8; /* 0.xxx... */
|
|
|
|
/*
|
|
* GY/GU and RY/RU should be the other way around according
|
|
* to BSpec, but reality doesn't agree. Just set them up in
|
|
* a way that results in the correct picture.
|
|
*/
|
|
I915_WRITE(PIPE_CSC_COEFF_RY_GY(pipe), coeff << 16);
|
|
I915_WRITE(PIPE_CSC_COEFF_BY(pipe), 0);
|
|
|
|
I915_WRITE(PIPE_CSC_COEFF_RU_GU(pipe), coeff);
|
|
I915_WRITE(PIPE_CSC_COEFF_BU(pipe), 0);
|
|
|
|
I915_WRITE(PIPE_CSC_COEFF_RV_GV(pipe), 0);
|
|
I915_WRITE(PIPE_CSC_COEFF_BV(pipe), coeff << 16);
|
|
|
|
I915_WRITE(PIPE_CSC_PREOFF_HI(pipe), 0);
|
|
I915_WRITE(PIPE_CSC_PREOFF_ME(pipe), 0);
|
|
I915_WRITE(PIPE_CSC_PREOFF_LO(pipe), 0);
|
|
|
|
if (INTEL_INFO(dev)->gen > 6) {
|
|
uint16_t postoff = 0;
|
|
|
|
if (intel_crtc->config->limited_color_range)
|
|
postoff = (16 * (1 << 12) / 255) & 0x1fff;
|
|
|
|
I915_WRITE(PIPE_CSC_POSTOFF_HI(pipe), postoff);
|
|
I915_WRITE(PIPE_CSC_POSTOFF_ME(pipe), postoff);
|
|
I915_WRITE(PIPE_CSC_POSTOFF_LO(pipe), postoff);
|
|
|
|
I915_WRITE(PIPE_CSC_MODE(pipe), 0);
|
|
} else {
|
|
uint32_t mode = CSC_MODE_YUV_TO_RGB;
|
|
|
|
if (intel_crtc->config->limited_color_range)
|
|
mode |= CSC_BLACK_SCREEN_OFFSET;
|
|
|
|
I915_WRITE(PIPE_CSC_MODE(pipe), mode);
|
|
}
|
|
}
|
|
|
|
static void haswell_set_pipeconf(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
enum pipe pipe = intel_crtc->pipe;
|
|
enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
|
|
uint32_t val;
|
|
|
|
val = 0;
|
|
|
|
if (IS_HASWELL(dev) && intel_crtc->config->dither)
|
|
val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
|
|
|
|
if (intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
|
|
val |= PIPECONF_INTERLACED_ILK;
|
|
else
|
|
val |= PIPECONF_PROGRESSIVE;
|
|
|
|
I915_WRITE(PIPECONF(cpu_transcoder), val);
|
|
POSTING_READ(PIPECONF(cpu_transcoder));
|
|
|
|
I915_WRITE(GAMMA_MODE(intel_crtc->pipe), GAMMA_MODE_MODE_8BIT);
|
|
POSTING_READ(GAMMA_MODE(intel_crtc->pipe));
|
|
|
|
if (IS_BROADWELL(dev) || INTEL_INFO(dev)->gen >= 9) {
|
|
val = 0;
|
|
|
|
switch (intel_crtc->config->pipe_bpp) {
|
|
case 18:
|
|
val |= PIPEMISC_DITHER_6_BPC;
|
|
break;
|
|
case 24:
|
|
val |= PIPEMISC_DITHER_8_BPC;
|
|
break;
|
|
case 30:
|
|
val |= PIPEMISC_DITHER_10_BPC;
|
|
break;
|
|
case 36:
|
|
val |= PIPEMISC_DITHER_12_BPC;
|
|
break;
|
|
default:
|
|
/* Case prevented by pipe_config_set_bpp. */
|
|
BUG();
|
|
}
|
|
|
|
if (intel_crtc->config->dither)
|
|
val |= PIPEMISC_DITHER_ENABLE | PIPEMISC_DITHER_TYPE_SP;
|
|
|
|
I915_WRITE(PIPEMISC(pipe), val);
|
|
}
|
|
}
|
|
|
|
static bool ironlake_compute_clocks(struct drm_crtc *crtc,
|
|
struct intel_crtc_state *crtc_state,
|
|
intel_clock_t *clock,
|
|
bool *has_reduced_clock,
|
|
intel_clock_t *reduced_clock)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int refclk;
|
|
const intel_limit_t *limit;
|
|
bool ret;
|
|
|
|
refclk = ironlake_get_refclk(crtc_state);
|
|
|
|
/*
|
|
* Returns a set of divisors for the desired target clock with the given
|
|
* refclk, or FALSE. The returned values represent the clock equation:
|
|
* reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
|
|
*/
|
|
limit = intel_limit(crtc_state, refclk);
|
|
ret = dev_priv->display.find_dpll(limit, crtc_state,
|
|
crtc_state->port_clock,
|
|
refclk, NULL, clock);
|
|
if (!ret)
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp)
|
|
{
|
|
/*
|
|
* Account for spread spectrum to avoid
|
|
* oversubscribing the link. Max center spread
|
|
* is 2.5%; use 5% for safety's sake.
|
|
*/
|
|
u32 bps = target_clock * bpp * 21 / 20;
|
|
return DIV_ROUND_UP(bps, link_bw * 8);
|
|
}
|
|
|
|
static bool ironlake_needs_fb_cb_tune(struct dpll *dpll, int factor)
|
|
{
|
|
return i9xx_dpll_compute_m(dpll) < factor * dpll->n;
|
|
}
|
|
|
|
static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
|
|
struct intel_crtc_state *crtc_state,
|
|
u32 *fp,
|
|
intel_clock_t *reduced_clock, u32 *fp2)
|
|
{
|
|
struct drm_crtc *crtc = &intel_crtc->base;
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_atomic_state *state = crtc_state->base.state;
|
|
struct drm_connector *connector;
|
|
struct drm_connector_state *connector_state;
|
|
struct intel_encoder *encoder;
|
|
uint32_t dpll;
|
|
int factor, num_connectors = 0, i;
|
|
bool is_lvds = false, is_sdvo = false;
|
|
|
|
for_each_connector_in_state(state, connector, connector_state, i) {
|
|
if (connector_state->crtc != crtc_state->base.crtc)
|
|
continue;
|
|
|
|
encoder = to_intel_encoder(connector_state->best_encoder);
|
|
|
|
switch (encoder->type) {
|
|
case INTEL_OUTPUT_LVDS:
|
|
is_lvds = true;
|
|
break;
|
|
case INTEL_OUTPUT_SDVO:
|
|
case INTEL_OUTPUT_HDMI:
|
|
is_sdvo = true;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
num_connectors++;
|
|
}
|
|
|
|
/* Enable autotuning of the PLL clock (if permissible) */
|
|
factor = 21;
|
|
if (is_lvds) {
|
|
if ((intel_panel_use_ssc(dev_priv) &&
|
|
dev_priv->vbt.lvds_ssc_freq == 100000) ||
|
|
(HAS_PCH_IBX(dev) && intel_is_dual_link_lvds(dev)))
|
|
factor = 25;
|
|
} else if (crtc_state->sdvo_tv_clock)
|
|
factor = 20;
|
|
|
|
if (ironlake_needs_fb_cb_tune(&crtc_state->dpll, factor))
|
|
*fp |= FP_CB_TUNE;
|
|
|
|
if (fp2 && (reduced_clock->m < factor * reduced_clock->n))
|
|
*fp2 |= FP_CB_TUNE;
|
|
|
|
dpll = 0;
|
|
|
|
if (is_lvds)
|
|
dpll |= DPLLB_MODE_LVDS;
|
|
else
|
|
dpll |= DPLLB_MODE_DAC_SERIAL;
|
|
|
|
dpll |= (crtc_state->pixel_multiplier - 1)
|
|
<< PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
|
|
|
|
if (is_sdvo)
|
|
dpll |= DPLL_SDVO_HIGH_SPEED;
|
|
if (crtc_state->has_dp_encoder)
|
|
dpll |= DPLL_SDVO_HIGH_SPEED;
|
|
|
|
/* compute bitmask from p1 value */
|
|
dpll |= (1 << (crtc_state->dpll.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
|
|
/* also FPA1 */
|
|
dpll |= (1 << (crtc_state->dpll.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
|
|
|
|
switch (crtc_state->dpll.p2) {
|
|
case 5:
|
|
dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
|
|
break;
|
|
case 7:
|
|
dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
|
|
break;
|
|
case 10:
|
|
dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
|
|
break;
|
|
case 14:
|
|
dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
|
|
break;
|
|
}
|
|
|
|
if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
|
|
dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
|
|
else
|
|
dpll |= PLL_REF_INPUT_DREFCLK;
|
|
|
|
return dpll | DPLL_VCO_ENABLE;
|
|
}
|
|
|
|
static int ironlake_crtc_compute_clock(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
intel_clock_t clock, reduced_clock;
|
|
u32 dpll = 0, fp = 0, fp2 = 0;
|
|
bool ok, has_reduced_clock = false;
|
|
bool is_lvds = false;
|
|
struct intel_shared_dpll *pll;
|
|
|
|
memset(&crtc_state->dpll_hw_state, 0,
|
|
sizeof(crtc_state->dpll_hw_state));
|
|
|
|
is_lvds = intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS);
|
|
|
|
WARN(!(HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)),
|
|
"Unexpected PCH type %d\n", INTEL_PCH_TYPE(dev));
|
|
|
|
ok = ironlake_compute_clocks(&crtc->base, crtc_state, &clock,
|
|
&has_reduced_clock, &reduced_clock);
|
|
if (!ok && !crtc_state->clock_set) {
|
|
DRM_ERROR("Couldn't find PLL settings for mode!\n");
|
|
return -EINVAL;
|
|
}
|
|
/* Compat-code for transition, will disappear. */
|
|
if (!crtc_state->clock_set) {
|
|
crtc_state->dpll.n = clock.n;
|
|
crtc_state->dpll.m1 = clock.m1;
|
|
crtc_state->dpll.m2 = clock.m2;
|
|
crtc_state->dpll.p1 = clock.p1;
|
|
crtc_state->dpll.p2 = clock.p2;
|
|
}
|
|
|
|
/* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
|
|
if (crtc_state->has_pch_encoder) {
|
|
fp = i9xx_dpll_compute_fp(&crtc_state->dpll);
|
|
if (has_reduced_clock)
|
|
fp2 = i9xx_dpll_compute_fp(&reduced_clock);
|
|
|
|
dpll = ironlake_compute_dpll(crtc, crtc_state,
|
|
&fp, &reduced_clock,
|
|
has_reduced_clock ? &fp2 : NULL);
|
|
|
|
crtc_state->dpll_hw_state.dpll = dpll;
|
|
crtc_state->dpll_hw_state.fp0 = fp;
|
|
if (has_reduced_clock)
|
|
crtc_state->dpll_hw_state.fp1 = fp2;
|
|
else
|
|
crtc_state->dpll_hw_state.fp1 = fp;
|
|
|
|
pll = intel_get_shared_dpll(crtc, crtc_state);
|
|
if (pll == NULL) {
|
|
DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n",
|
|
pipe_name(crtc->pipe));
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (is_lvds && has_reduced_clock)
|
|
crtc->lowfreq_avail = true;
|
|
else
|
|
crtc->lowfreq_avail = false;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void intel_pch_transcoder_get_m_n(struct intel_crtc *crtc,
|
|
struct intel_link_m_n *m_n)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
enum pipe pipe = crtc->pipe;
|
|
|
|
m_n->link_m = I915_READ(PCH_TRANS_LINK_M1(pipe));
|
|
m_n->link_n = I915_READ(PCH_TRANS_LINK_N1(pipe));
|
|
m_n->gmch_m = I915_READ(PCH_TRANS_DATA_M1(pipe))
|
|
& ~TU_SIZE_MASK;
|
|
m_n->gmch_n = I915_READ(PCH_TRANS_DATA_N1(pipe));
|
|
m_n->tu = ((I915_READ(PCH_TRANS_DATA_M1(pipe))
|
|
& TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
|
|
}
|
|
|
|
static void intel_cpu_transcoder_get_m_n(struct intel_crtc *crtc,
|
|
enum transcoder transcoder,
|
|
struct intel_link_m_n *m_n,
|
|
struct intel_link_m_n *m2_n2)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
enum pipe pipe = crtc->pipe;
|
|
|
|
if (INTEL_INFO(dev)->gen >= 5) {
|
|
m_n->link_m = I915_READ(PIPE_LINK_M1(transcoder));
|
|
m_n->link_n = I915_READ(PIPE_LINK_N1(transcoder));
|
|
m_n->gmch_m = I915_READ(PIPE_DATA_M1(transcoder))
|
|
& ~TU_SIZE_MASK;
|
|
m_n->gmch_n = I915_READ(PIPE_DATA_N1(transcoder));
|
|
m_n->tu = ((I915_READ(PIPE_DATA_M1(transcoder))
|
|
& TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
|
|
/* Read M2_N2 registers only for gen < 8 (M2_N2 available for
|
|
* gen < 8) and if DRRS is supported (to make sure the
|
|
* registers are not unnecessarily read).
|
|
*/
|
|
if (m2_n2 && INTEL_INFO(dev)->gen < 8 &&
|
|
crtc->config->has_drrs) {
|
|
m2_n2->link_m = I915_READ(PIPE_LINK_M2(transcoder));
|
|
m2_n2->link_n = I915_READ(PIPE_LINK_N2(transcoder));
|
|
m2_n2->gmch_m = I915_READ(PIPE_DATA_M2(transcoder))
|
|
& ~TU_SIZE_MASK;
|
|
m2_n2->gmch_n = I915_READ(PIPE_DATA_N2(transcoder));
|
|
m2_n2->tu = ((I915_READ(PIPE_DATA_M2(transcoder))
|
|
& TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
|
|
}
|
|
} else {
|
|
m_n->link_m = I915_READ(PIPE_LINK_M_G4X(pipe));
|
|
m_n->link_n = I915_READ(PIPE_LINK_N_G4X(pipe));
|
|
m_n->gmch_m = I915_READ(PIPE_DATA_M_G4X(pipe))
|
|
& ~TU_SIZE_MASK;
|
|
m_n->gmch_n = I915_READ(PIPE_DATA_N_G4X(pipe));
|
|
m_n->tu = ((I915_READ(PIPE_DATA_M_G4X(pipe))
|
|
& TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
|
|
}
|
|
}
|
|
|
|
void intel_dp_get_m_n(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
if (pipe_config->has_pch_encoder)
|
|
intel_pch_transcoder_get_m_n(crtc, &pipe_config->dp_m_n);
|
|
else
|
|
intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder,
|
|
&pipe_config->dp_m_n,
|
|
&pipe_config->dp_m2_n2);
|
|
}
|
|
|
|
static void ironlake_get_fdi_m_n_config(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder,
|
|
&pipe_config->fdi_m_n, NULL);
|
|
}
|
|
|
|
static void skylake_get_pfit_config(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc_scaler_state *scaler_state = &pipe_config->scaler_state;
|
|
uint32_t ps_ctrl = 0;
|
|
int id = -1;
|
|
int i;
|
|
|
|
/* find scaler attached to this pipe */
|
|
for (i = 0; i < crtc->num_scalers; i++) {
|
|
ps_ctrl = I915_READ(SKL_PS_CTRL(crtc->pipe, i));
|
|
if (ps_ctrl & PS_SCALER_EN && !(ps_ctrl & PS_PLANE_SEL_MASK)) {
|
|
id = i;
|
|
pipe_config->pch_pfit.enabled = true;
|
|
pipe_config->pch_pfit.pos = I915_READ(SKL_PS_WIN_POS(crtc->pipe, i));
|
|
pipe_config->pch_pfit.size = I915_READ(SKL_PS_WIN_SZ(crtc->pipe, i));
|
|
break;
|
|
}
|
|
}
|
|
|
|
scaler_state->scaler_id = id;
|
|
if (id >= 0) {
|
|
scaler_state->scaler_users |= (1 << SKL_CRTC_INDEX);
|
|
} else {
|
|
scaler_state->scaler_users &= ~(1 << SKL_CRTC_INDEX);
|
|
}
|
|
}
|
|
|
|
static void
|
|
skylake_get_initial_plane_config(struct intel_crtc *crtc,
|
|
struct intel_initial_plane_config *plane_config)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 val, base, offset, stride_mult, tiling;
|
|
int pipe = crtc->pipe;
|
|
int fourcc, pixel_format;
|
|
unsigned int aligned_height;
|
|
struct drm_framebuffer *fb;
|
|
struct intel_framebuffer *intel_fb;
|
|
|
|
intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
|
|
if (!intel_fb) {
|
|
DRM_DEBUG_KMS("failed to alloc fb\n");
|
|
return;
|
|
}
|
|
|
|
fb = &intel_fb->base;
|
|
|
|
val = I915_READ(PLANE_CTL(pipe, 0));
|
|
if (!(val & PLANE_CTL_ENABLE))
|
|
goto error;
|
|
|
|
pixel_format = val & PLANE_CTL_FORMAT_MASK;
|
|
fourcc = skl_format_to_fourcc(pixel_format,
|
|
val & PLANE_CTL_ORDER_RGBX,
|
|
val & PLANE_CTL_ALPHA_MASK);
|
|
fb->pixel_format = fourcc;
|
|
fb->bits_per_pixel = drm_format_plane_cpp(fourcc, 0) * 8;
|
|
|
|
tiling = val & PLANE_CTL_TILED_MASK;
|
|
switch (tiling) {
|
|
case PLANE_CTL_TILED_LINEAR:
|
|
fb->modifier[0] = DRM_FORMAT_MOD_NONE;
|
|
break;
|
|
case PLANE_CTL_TILED_X:
|
|
plane_config->tiling = I915_TILING_X;
|
|
fb->modifier[0] = I915_FORMAT_MOD_X_TILED;
|
|
break;
|
|
case PLANE_CTL_TILED_Y:
|
|
fb->modifier[0] = I915_FORMAT_MOD_Y_TILED;
|
|
break;
|
|
case PLANE_CTL_TILED_YF:
|
|
fb->modifier[0] = I915_FORMAT_MOD_Yf_TILED;
|
|
break;
|
|
default:
|
|
MISSING_CASE(tiling);
|
|
goto error;
|
|
}
|
|
|
|
base = I915_READ(PLANE_SURF(pipe, 0)) & 0xfffff000;
|
|
plane_config->base = base;
|
|
|
|
offset = I915_READ(PLANE_OFFSET(pipe, 0));
|
|
|
|
val = I915_READ(PLANE_SIZE(pipe, 0));
|
|
fb->height = ((val >> 16) & 0xfff) + 1;
|
|
fb->width = ((val >> 0) & 0x1fff) + 1;
|
|
|
|
val = I915_READ(PLANE_STRIDE(pipe, 0));
|
|
stride_mult = intel_fb_stride_alignment(dev, fb->modifier[0],
|
|
fb->pixel_format);
|
|
fb->pitches[0] = (val & 0x3ff) * stride_mult;
|
|
|
|
aligned_height = intel_fb_align_height(dev, fb->height,
|
|
fb->pixel_format,
|
|
fb->modifier[0]);
|
|
|
|
plane_config->size = fb->pitches[0] * aligned_height;
|
|
|
|
DRM_DEBUG_KMS("pipe %c with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
|
|
pipe_name(pipe), fb->width, fb->height,
|
|
fb->bits_per_pixel, base, fb->pitches[0],
|
|
plane_config->size);
|
|
|
|
plane_config->fb = intel_fb;
|
|
return;
|
|
|
|
error:
|
|
kfree(fb);
|
|
}
|
|
|
|
static void ironlake_get_pfit_config(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t tmp;
|
|
|
|
tmp = I915_READ(PF_CTL(crtc->pipe));
|
|
|
|
if (tmp & PF_ENABLE) {
|
|
pipe_config->pch_pfit.enabled = true;
|
|
pipe_config->pch_pfit.pos = I915_READ(PF_WIN_POS(crtc->pipe));
|
|
pipe_config->pch_pfit.size = I915_READ(PF_WIN_SZ(crtc->pipe));
|
|
|
|
/* We currently do not free assignements of panel fitters on
|
|
* ivb/hsw (since we don't use the higher upscaling modes which
|
|
* differentiates them) so just WARN about this case for now. */
|
|
if (IS_GEN7(dev)) {
|
|
WARN_ON((tmp & PF_PIPE_SEL_MASK_IVB) !=
|
|
PF_PIPE_SEL_IVB(crtc->pipe));
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
ironlake_get_initial_plane_config(struct intel_crtc *crtc,
|
|
struct intel_initial_plane_config *plane_config)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 val, base, offset;
|
|
int pipe = crtc->pipe;
|
|
int fourcc, pixel_format;
|
|
unsigned int aligned_height;
|
|
struct drm_framebuffer *fb;
|
|
struct intel_framebuffer *intel_fb;
|
|
|
|
val = I915_READ(DSPCNTR(pipe));
|
|
if (!(val & DISPLAY_PLANE_ENABLE))
|
|
return;
|
|
|
|
intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
|
|
if (!intel_fb) {
|
|
DRM_DEBUG_KMS("failed to alloc fb\n");
|
|
return;
|
|
}
|
|
|
|
fb = &intel_fb->base;
|
|
|
|
if (INTEL_INFO(dev)->gen >= 4) {
|
|
if (val & DISPPLANE_TILED) {
|
|
plane_config->tiling = I915_TILING_X;
|
|
fb->modifier[0] = I915_FORMAT_MOD_X_TILED;
|
|
}
|
|
}
|
|
|
|
pixel_format = val & DISPPLANE_PIXFORMAT_MASK;
|
|
fourcc = i9xx_format_to_fourcc(pixel_format);
|
|
fb->pixel_format = fourcc;
|
|
fb->bits_per_pixel = drm_format_plane_cpp(fourcc, 0) * 8;
|
|
|
|
base = I915_READ(DSPSURF(pipe)) & 0xfffff000;
|
|
if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
|
|
offset = I915_READ(DSPOFFSET(pipe));
|
|
} else {
|
|
if (plane_config->tiling)
|
|
offset = I915_READ(DSPTILEOFF(pipe));
|
|
else
|
|
offset = I915_READ(DSPLINOFF(pipe));
|
|
}
|
|
plane_config->base = base;
|
|
|
|
val = I915_READ(PIPESRC(pipe));
|
|
fb->width = ((val >> 16) & 0xfff) + 1;
|
|
fb->height = ((val >> 0) & 0xfff) + 1;
|
|
|
|
val = I915_READ(DSPSTRIDE(pipe));
|
|
fb->pitches[0] = val & 0xffffffc0;
|
|
|
|
aligned_height = intel_fb_align_height(dev, fb->height,
|
|
fb->pixel_format,
|
|
fb->modifier[0]);
|
|
|
|
plane_config->size = fb->pitches[0] * aligned_height;
|
|
|
|
DRM_DEBUG_KMS("pipe %c with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
|
|
pipe_name(pipe), fb->width, fb->height,
|
|
fb->bits_per_pixel, base, fb->pitches[0],
|
|
plane_config->size);
|
|
|
|
plane_config->fb = intel_fb;
|
|
}
|
|
|
|
static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t tmp;
|
|
|
|
if (!intel_display_power_is_enabled(dev_priv,
|
|
POWER_DOMAIN_PIPE(crtc->pipe)))
|
|
return false;
|
|
|
|
pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
|
|
pipe_config->shared_dpll = DPLL_ID_PRIVATE;
|
|
|
|
tmp = I915_READ(PIPECONF(crtc->pipe));
|
|
if (!(tmp & PIPECONF_ENABLE))
|
|
return false;
|
|
|
|
switch (tmp & PIPECONF_BPC_MASK) {
|
|
case PIPECONF_6BPC:
|
|
pipe_config->pipe_bpp = 18;
|
|
break;
|
|
case PIPECONF_8BPC:
|
|
pipe_config->pipe_bpp = 24;
|
|
break;
|
|
case PIPECONF_10BPC:
|
|
pipe_config->pipe_bpp = 30;
|
|
break;
|
|
case PIPECONF_12BPC:
|
|
pipe_config->pipe_bpp = 36;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (tmp & PIPECONF_COLOR_RANGE_SELECT)
|
|
pipe_config->limited_color_range = true;
|
|
|
|
if (I915_READ(PCH_TRANSCONF(crtc->pipe)) & TRANS_ENABLE) {
|
|
struct intel_shared_dpll *pll;
|
|
|
|
pipe_config->has_pch_encoder = true;
|
|
|
|
tmp = I915_READ(FDI_RX_CTL(crtc->pipe));
|
|
pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
|
|
FDI_DP_PORT_WIDTH_SHIFT) + 1;
|
|
|
|
ironlake_get_fdi_m_n_config(crtc, pipe_config);
|
|
|
|
if (HAS_PCH_IBX(dev_priv->dev)) {
|
|
pipe_config->shared_dpll =
|
|
(enum intel_dpll_id) crtc->pipe;
|
|
} else {
|
|
tmp = I915_READ(PCH_DPLL_SEL);
|
|
if (tmp & TRANS_DPLLB_SEL(crtc->pipe))
|
|
pipe_config->shared_dpll = DPLL_ID_PCH_PLL_B;
|
|
else
|
|
pipe_config->shared_dpll = DPLL_ID_PCH_PLL_A;
|
|
}
|
|
|
|
pll = &dev_priv->shared_dplls[pipe_config->shared_dpll];
|
|
|
|
WARN_ON(!pll->get_hw_state(dev_priv, pll,
|
|
&pipe_config->dpll_hw_state));
|
|
|
|
tmp = pipe_config->dpll_hw_state.dpll;
|
|
pipe_config->pixel_multiplier =
|
|
((tmp & PLL_REF_SDVO_HDMI_MULTIPLIER_MASK)
|
|
>> PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT) + 1;
|
|
|
|
ironlake_pch_clock_get(crtc, pipe_config);
|
|
} else {
|
|
pipe_config->pixel_multiplier = 1;
|
|
}
|
|
|
|
intel_get_pipe_timings(crtc, pipe_config);
|
|
|
|
ironlake_get_pfit_config(crtc, pipe_config);
|
|
|
|
return true;
|
|
}
|
|
|
|
static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct drm_device *dev = dev_priv->dev;
|
|
struct intel_crtc *crtc;
|
|
|
|
for_each_intel_crtc(dev, crtc)
|
|
I915_STATE_WARN(crtc->active, "CRTC for pipe %c enabled\n",
|
|
pipe_name(crtc->pipe));
|
|
|
|
I915_STATE_WARN(I915_READ(HSW_PWR_WELL_DRIVER), "Power well on\n");
|
|
I915_STATE_WARN(I915_READ(SPLL_CTL) & SPLL_PLL_ENABLE, "SPLL enabled\n");
|
|
I915_STATE_WARN(I915_READ(WRPLL_CTL(0)) & WRPLL_PLL_ENABLE, "WRPLL1 enabled\n");
|
|
I915_STATE_WARN(I915_READ(WRPLL_CTL(1)) & WRPLL_PLL_ENABLE, "WRPLL2 enabled\n");
|
|
I915_STATE_WARN(I915_READ(PCH_PP_STATUS) & PP_ON, "Panel power on\n");
|
|
I915_STATE_WARN(I915_READ(BLC_PWM_CPU_CTL2) & BLM_PWM_ENABLE,
|
|
"CPU PWM1 enabled\n");
|
|
if (IS_HASWELL(dev))
|
|
I915_STATE_WARN(I915_READ(HSW_BLC_PWM2_CTL) & BLM_PWM_ENABLE,
|
|
"CPU PWM2 enabled\n");
|
|
I915_STATE_WARN(I915_READ(BLC_PWM_PCH_CTL1) & BLM_PCH_PWM_ENABLE,
|
|
"PCH PWM1 enabled\n");
|
|
I915_STATE_WARN(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE,
|
|
"Utility pin enabled\n");
|
|
I915_STATE_WARN(I915_READ(PCH_GTC_CTL) & PCH_GTC_ENABLE, "PCH GTC enabled\n");
|
|
|
|
/*
|
|
* In theory we can still leave IRQs enabled, as long as only the HPD
|
|
* interrupts remain enabled. We used to check for that, but since it's
|
|
* gen-specific and since we only disable LCPLL after we fully disable
|
|
* the interrupts, the check below should be enough.
|
|
*/
|
|
I915_STATE_WARN(intel_irqs_enabled(dev_priv), "IRQs enabled\n");
|
|
}
|
|
|
|
static uint32_t hsw_read_dcomp(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct drm_device *dev = dev_priv->dev;
|
|
|
|
if (IS_HASWELL(dev))
|
|
return I915_READ(D_COMP_HSW);
|
|
else
|
|
return I915_READ(D_COMP_BDW);
|
|
}
|
|
|
|
static void hsw_write_dcomp(struct drm_i915_private *dev_priv, uint32_t val)
|
|
{
|
|
struct drm_device *dev = dev_priv->dev;
|
|
|
|
if (IS_HASWELL(dev)) {
|
|
mutex_lock(&dev_priv->rps.hw_lock);
|
|
if (sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_D_COMP,
|
|
val))
|
|
DRM_ERROR("Failed to write to D_COMP\n");
|
|
mutex_unlock(&dev_priv->rps.hw_lock);
|
|
} else {
|
|
I915_WRITE(D_COMP_BDW, val);
|
|
POSTING_READ(D_COMP_BDW);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* This function implements pieces of two sequences from BSpec:
|
|
* - Sequence for display software to disable LCPLL
|
|
* - Sequence for display software to allow package C8+
|
|
* The steps implemented here are just the steps that actually touch the LCPLL
|
|
* register. Callers should take care of disabling all the display engine
|
|
* functions, doing the mode unset, fixing interrupts, etc.
|
|
*/
|
|
static void hsw_disable_lcpll(struct drm_i915_private *dev_priv,
|
|
bool switch_to_fclk, bool allow_power_down)
|
|
{
|
|
uint32_t val;
|
|
|
|
assert_can_disable_lcpll(dev_priv);
|
|
|
|
val = I915_READ(LCPLL_CTL);
|
|
|
|
if (switch_to_fclk) {
|
|
val |= LCPLL_CD_SOURCE_FCLK;
|
|
I915_WRITE(LCPLL_CTL, val);
|
|
|
|
if (wait_for_atomic_us(I915_READ(LCPLL_CTL) &
|
|
LCPLL_CD_SOURCE_FCLK_DONE, 1))
|
|
DRM_ERROR("Switching to FCLK failed\n");
|
|
|
|
val = I915_READ(LCPLL_CTL);
|
|
}
|
|
|
|
val |= LCPLL_PLL_DISABLE;
|
|
I915_WRITE(LCPLL_CTL, val);
|
|
POSTING_READ(LCPLL_CTL);
|
|
|
|
if (wait_for((I915_READ(LCPLL_CTL) & LCPLL_PLL_LOCK) == 0, 1))
|
|
DRM_ERROR("LCPLL still locked\n");
|
|
|
|
val = hsw_read_dcomp(dev_priv);
|
|
val |= D_COMP_COMP_DISABLE;
|
|
hsw_write_dcomp(dev_priv, val);
|
|
ndelay(100);
|
|
|
|
if (wait_for((hsw_read_dcomp(dev_priv) & D_COMP_RCOMP_IN_PROGRESS) == 0,
|
|
1))
|
|
DRM_ERROR("D_COMP RCOMP still in progress\n");
|
|
|
|
if (allow_power_down) {
|
|
val = I915_READ(LCPLL_CTL);
|
|
val |= LCPLL_POWER_DOWN_ALLOW;
|
|
I915_WRITE(LCPLL_CTL, val);
|
|
POSTING_READ(LCPLL_CTL);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Fully restores LCPLL, disallowing power down and switching back to LCPLL
|
|
* source.
|
|
*/
|
|
static void hsw_restore_lcpll(struct drm_i915_private *dev_priv)
|
|
{
|
|
uint32_t val;
|
|
|
|
val = I915_READ(LCPLL_CTL);
|
|
|
|
if ((val & (LCPLL_PLL_LOCK | LCPLL_PLL_DISABLE | LCPLL_CD_SOURCE_FCLK |
|
|
LCPLL_POWER_DOWN_ALLOW)) == LCPLL_PLL_LOCK)
|
|
return;
|
|
|
|
/*
|
|
* Make sure we're not on PC8 state before disabling PC8, otherwise
|
|
* we'll hang the machine. To prevent PC8 state, just enable force_wake.
|
|
*/
|
|
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
|
|
|
|
if (val & LCPLL_POWER_DOWN_ALLOW) {
|
|
val &= ~LCPLL_POWER_DOWN_ALLOW;
|
|
I915_WRITE(LCPLL_CTL, val);
|
|
POSTING_READ(LCPLL_CTL);
|
|
}
|
|
|
|
val = hsw_read_dcomp(dev_priv);
|
|
val |= D_COMP_COMP_FORCE;
|
|
val &= ~D_COMP_COMP_DISABLE;
|
|
hsw_write_dcomp(dev_priv, val);
|
|
|
|
val = I915_READ(LCPLL_CTL);
|
|
val &= ~LCPLL_PLL_DISABLE;
|
|
I915_WRITE(LCPLL_CTL, val);
|
|
|
|
if (wait_for(I915_READ(LCPLL_CTL) & LCPLL_PLL_LOCK, 5))
|
|
DRM_ERROR("LCPLL not locked yet\n");
|
|
|
|
if (val & LCPLL_CD_SOURCE_FCLK) {
|
|
val = I915_READ(LCPLL_CTL);
|
|
val &= ~LCPLL_CD_SOURCE_FCLK;
|
|
I915_WRITE(LCPLL_CTL, val);
|
|
|
|
if (wait_for_atomic_us((I915_READ(LCPLL_CTL) &
|
|
LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
|
|
DRM_ERROR("Switching back to LCPLL failed\n");
|
|
}
|
|
|
|
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
|
|
intel_update_cdclk(dev_priv->dev);
|
|
}
|
|
|
|
/*
|
|
* Package states C8 and deeper are really deep PC states that can only be
|
|
* reached when all the devices on the system allow it, so even if the graphics
|
|
* device allows PC8+, it doesn't mean the system will actually get to these
|
|
* states. Our driver only allows PC8+ when going into runtime PM.
|
|
*
|
|
* The requirements for PC8+ are that all the outputs are disabled, the power
|
|
* well is disabled and most interrupts are disabled, and these are also
|
|
* requirements for runtime PM. When these conditions are met, we manually do
|
|
* the other conditions: disable the interrupts, clocks and switch LCPLL refclk
|
|
* to Fclk. If we're in PC8+ and we get an non-hotplug interrupt, we can hard
|
|
* hang the machine.
|
|
*
|
|
* When we really reach PC8 or deeper states (not just when we allow it) we lose
|
|
* the state of some registers, so when we come back from PC8+ we need to
|
|
* restore this state. We don't get into PC8+ if we're not in RC6, so we don't
|
|
* need to take care of the registers kept by RC6. Notice that this happens even
|
|
* if we don't put the device in PCI D3 state (which is what currently happens
|
|
* because of the runtime PM support).
|
|
*
|
|
* For more, read "Display Sequences for Package C8" on the hardware
|
|
* documentation.
|
|
*/
|
|
void hsw_enable_pc8(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct drm_device *dev = dev_priv->dev;
|
|
uint32_t val;
|
|
|
|
DRM_DEBUG_KMS("Enabling package C8+\n");
|
|
|
|
if (HAS_PCH_LPT_LP(dev)) {
|
|
val = I915_READ(SOUTH_DSPCLK_GATE_D);
|
|
val &= ~PCH_LP_PARTITION_LEVEL_DISABLE;
|
|
I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
|
|
}
|
|
|
|
lpt_disable_clkout_dp(dev);
|
|
hsw_disable_lcpll(dev_priv, true, true);
|
|
}
|
|
|
|
void hsw_disable_pc8(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct drm_device *dev = dev_priv->dev;
|
|
uint32_t val;
|
|
|
|
DRM_DEBUG_KMS("Disabling package C8+\n");
|
|
|
|
hsw_restore_lcpll(dev_priv);
|
|
lpt_init_pch_refclk(dev);
|
|
|
|
if (HAS_PCH_LPT_LP(dev)) {
|
|
val = I915_READ(SOUTH_DSPCLK_GATE_D);
|
|
val |= PCH_LP_PARTITION_LEVEL_DISABLE;
|
|
I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
|
|
}
|
|
|
|
intel_prepare_ddi(dev);
|
|
}
|
|
|
|
static void broxton_modeset_commit_cdclk(struct drm_atomic_state *old_state)
|
|
{
|
|
struct drm_device *dev = old_state->dev;
|
|
unsigned int req_cdclk = to_intel_atomic_state(old_state)->cdclk;
|
|
|
|
broxton_set_cdclk(dev, req_cdclk);
|
|
}
|
|
|
|
/* compute the max rate for new configuration */
|
|
static int ilk_max_pixel_rate(struct drm_atomic_state *state)
|
|
{
|
|
struct intel_crtc *intel_crtc;
|
|
struct intel_crtc_state *crtc_state;
|
|
int max_pixel_rate = 0;
|
|
|
|
for_each_intel_crtc(state->dev, intel_crtc) {
|
|
int pixel_rate;
|
|
|
|
crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
|
|
if (IS_ERR(crtc_state))
|
|
return PTR_ERR(crtc_state);
|
|
|
|
if (!crtc_state->base.enable)
|
|
continue;
|
|
|
|
pixel_rate = ilk_pipe_pixel_rate(crtc_state);
|
|
|
|
/* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
|
|
if (IS_BROADWELL(state->dev) && crtc_state->ips_enabled)
|
|
pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95);
|
|
|
|
max_pixel_rate = max(max_pixel_rate, pixel_rate);
|
|
}
|
|
|
|
return max_pixel_rate;
|
|
}
|
|
|
|
static void broadwell_set_cdclk(struct drm_device *dev, int cdclk)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t val, data;
|
|
int ret;
|
|
|
|
if (WARN((I915_READ(LCPLL_CTL) &
|
|
(LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK |
|
|
LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE |
|
|
LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW |
|
|
LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK,
|
|
"trying to change cdclk frequency with cdclk not enabled\n"))
|
|
return;
|
|
|
|
mutex_lock(&dev_priv->rps.hw_lock);
|
|
ret = sandybridge_pcode_write(dev_priv,
|
|
BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
|
|
mutex_unlock(&dev_priv->rps.hw_lock);
|
|
if (ret) {
|
|
DRM_ERROR("failed to inform pcode about cdclk change\n");
|
|
return;
|
|
}
|
|
|
|
val = I915_READ(LCPLL_CTL);
|
|
val |= LCPLL_CD_SOURCE_FCLK;
|
|
I915_WRITE(LCPLL_CTL, val);
|
|
|
|
if (wait_for_atomic_us(I915_READ(LCPLL_CTL) &
|
|
LCPLL_CD_SOURCE_FCLK_DONE, 1))
|
|
DRM_ERROR("Switching to FCLK failed\n");
|
|
|
|
val = I915_READ(LCPLL_CTL);
|
|
val &= ~LCPLL_CLK_FREQ_MASK;
|
|
|
|
switch (cdclk) {
|
|
case 450000:
|
|
val |= LCPLL_CLK_FREQ_450;
|
|
data = 0;
|
|
break;
|
|
case 540000:
|
|
val |= LCPLL_CLK_FREQ_54O_BDW;
|
|
data = 1;
|
|
break;
|
|
case 337500:
|
|
val |= LCPLL_CLK_FREQ_337_5_BDW;
|
|
data = 2;
|
|
break;
|
|
case 675000:
|
|
val |= LCPLL_CLK_FREQ_675_BDW;
|
|
data = 3;
|
|
break;
|
|
default:
|
|
WARN(1, "invalid cdclk frequency\n");
|
|
return;
|
|
}
|
|
|
|
I915_WRITE(LCPLL_CTL, val);
|
|
|
|
val = I915_READ(LCPLL_CTL);
|
|
val &= ~LCPLL_CD_SOURCE_FCLK;
|
|
I915_WRITE(LCPLL_CTL, val);
|
|
|
|
if (wait_for_atomic_us((I915_READ(LCPLL_CTL) &
|
|
LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
|
|
DRM_ERROR("Switching back to LCPLL failed\n");
|
|
|
|
mutex_lock(&dev_priv->rps.hw_lock);
|
|
sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, data);
|
|
mutex_unlock(&dev_priv->rps.hw_lock);
|
|
|
|
intel_update_cdclk(dev);
|
|
|
|
WARN(cdclk != dev_priv->cdclk_freq,
|
|
"cdclk requested %d kHz but got %d kHz\n",
|
|
cdclk, dev_priv->cdclk_freq);
|
|
}
|
|
|
|
static int broadwell_modeset_calc_cdclk(struct drm_atomic_state *state)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(state->dev);
|
|
int max_pixclk = ilk_max_pixel_rate(state);
|
|
int cdclk;
|
|
|
|
/*
|
|
* FIXME should also account for plane ratio
|
|
* once 64bpp pixel formats are supported.
|
|
*/
|
|
if (max_pixclk > 540000)
|
|
cdclk = 675000;
|
|
else if (max_pixclk > 450000)
|
|
cdclk = 540000;
|
|
else if (max_pixclk > 337500)
|
|
cdclk = 450000;
|
|
else
|
|
cdclk = 337500;
|
|
|
|
/*
|
|
* FIXME move the cdclk caclulation to
|
|
* compute_config() so we can fail gracegully.
|
|
*/
|
|
if (cdclk > dev_priv->max_cdclk_freq) {
|
|
DRM_ERROR("requested cdclk (%d kHz) exceeds max (%d kHz)\n",
|
|
cdclk, dev_priv->max_cdclk_freq);
|
|
cdclk = dev_priv->max_cdclk_freq;
|
|
}
|
|
|
|
to_intel_atomic_state(state)->cdclk = cdclk;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void broadwell_modeset_commit_cdclk(struct drm_atomic_state *old_state)
|
|
{
|
|
struct drm_device *dev = old_state->dev;
|
|
unsigned int req_cdclk = to_intel_atomic_state(old_state)->cdclk;
|
|
|
|
broadwell_set_cdclk(dev, req_cdclk);
|
|
}
|
|
|
|
static int haswell_crtc_compute_clock(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *crtc_state)
|
|
{
|
|
if (!intel_ddi_pll_select(crtc, crtc_state))
|
|
return -EINVAL;
|
|
|
|
crtc->lowfreq_avail = false;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bxt_get_ddi_pll(struct drm_i915_private *dev_priv,
|
|
enum port port,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
switch (port) {
|
|
case PORT_A:
|
|
pipe_config->ddi_pll_sel = SKL_DPLL0;
|
|
pipe_config->shared_dpll = DPLL_ID_SKL_DPLL1;
|
|
break;
|
|
case PORT_B:
|
|
pipe_config->ddi_pll_sel = SKL_DPLL1;
|
|
pipe_config->shared_dpll = DPLL_ID_SKL_DPLL2;
|
|
break;
|
|
case PORT_C:
|
|
pipe_config->ddi_pll_sel = SKL_DPLL2;
|
|
pipe_config->shared_dpll = DPLL_ID_SKL_DPLL3;
|
|
break;
|
|
default:
|
|
DRM_ERROR("Incorrect port type\n");
|
|
}
|
|
}
|
|
|
|
static void skylake_get_ddi_pll(struct drm_i915_private *dev_priv,
|
|
enum port port,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
u32 temp, dpll_ctl1;
|
|
|
|
temp = I915_READ(DPLL_CTRL2) & DPLL_CTRL2_DDI_CLK_SEL_MASK(port);
|
|
pipe_config->ddi_pll_sel = temp >> (port * 3 + 1);
|
|
|
|
switch (pipe_config->ddi_pll_sel) {
|
|
case SKL_DPLL0:
|
|
/*
|
|
* On SKL the eDP DPLL (DPLL0 as we don't use SSC) is not part
|
|
* of the shared DPLL framework and thus needs to be read out
|
|
* separately
|
|
*/
|
|
dpll_ctl1 = I915_READ(DPLL_CTRL1);
|
|
pipe_config->dpll_hw_state.ctrl1 = dpll_ctl1 & 0x3f;
|
|
break;
|
|
case SKL_DPLL1:
|
|
pipe_config->shared_dpll = DPLL_ID_SKL_DPLL1;
|
|
break;
|
|
case SKL_DPLL2:
|
|
pipe_config->shared_dpll = DPLL_ID_SKL_DPLL2;
|
|
break;
|
|
case SKL_DPLL3:
|
|
pipe_config->shared_dpll = DPLL_ID_SKL_DPLL3;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void haswell_get_ddi_pll(struct drm_i915_private *dev_priv,
|
|
enum port port,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
pipe_config->ddi_pll_sel = I915_READ(PORT_CLK_SEL(port));
|
|
|
|
switch (pipe_config->ddi_pll_sel) {
|
|
case PORT_CLK_SEL_WRPLL1:
|
|
pipe_config->shared_dpll = DPLL_ID_WRPLL1;
|
|
break;
|
|
case PORT_CLK_SEL_WRPLL2:
|
|
pipe_config->shared_dpll = DPLL_ID_WRPLL2;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void haswell_get_ddi_port_state(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_shared_dpll *pll;
|
|
enum port port;
|
|
uint32_t tmp;
|
|
|
|
tmp = I915_READ(TRANS_DDI_FUNC_CTL(pipe_config->cpu_transcoder));
|
|
|
|
port = (tmp & TRANS_DDI_PORT_MASK) >> TRANS_DDI_PORT_SHIFT;
|
|
|
|
if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
|
|
skylake_get_ddi_pll(dev_priv, port, pipe_config);
|
|
else if (IS_BROXTON(dev))
|
|
bxt_get_ddi_pll(dev_priv, port, pipe_config);
|
|
else
|
|
haswell_get_ddi_pll(dev_priv, port, pipe_config);
|
|
|
|
if (pipe_config->shared_dpll >= 0) {
|
|
pll = &dev_priv->shared_dplls[pipe_config->shared_dpll];
|
|
|
|
WARN_ON(!pll->get_hw_state(dev_priv, pll,
|
|
&pipe_config->dpll_hw_state));
|
|
}
|
|
|
|
/*
|
|
* Haswell has only FDI/PCH transcoder A. It is which is connected to
|
|
* DDI E. So just check whether this pipe is wired to DDI E and whether
|
|
* the PCH transcoder is on.
|
|
*/
|
|
if (INTEL_INFO(dev)->gen < 9 &&
|
|
(port == PORT_E) && I915_READ(LPT_TRANSCONF) & TRANS_ENABLE) {
|
|
pipe_config->has_pch_encoder = true;
|
|
|
|
tmp = I915_READ(FDI_RX_CTL(PIPE_A));
|
|
pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
|
|
FDI_DP_PORT_WIDTH_SHIFT) + 1;
|
|
|
|
ironlake_get_fdi_m_n_config(crtc, pipe_config);
|
|
}
|
|
}
|
|
|
|
static bool haswell_get_pipe_config(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
enum intel_display_power_domain pfit_domain;
|
|
uint32_t tmp;
|
|
|
|
if (!intel_display_power_is_enabled(dev_priv,
|
|
POWER_DOMAIN_PIPE(crtc->pipe)))
|
|
return false;
|
|
|
|
pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
|
|
pipe_config->shared_dpll = DPLL_ID_PRIVATE;
|
|
|
|
tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
|
|
if (tmp & TRANS_DDI_FUNC_ENABLE) {
|
|
enum pipe trans_edp_pipe;
|
|
switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
|
|
default:
|
|
WARN(1, "unknown pipe linked to edp transcoder\n");
|
|
case TRANS_DDI_EDP_INPUT_A_ONOFF:
|
|
case TRANS_DDI_EDP_INPUT_A_ON:
|
|
trans_edp_pipe = PIPE_A;
|
|
break;
|
|
case TRANS_DDI_EDP_INPUT_B_ONOFF:
|
|
trans_edp_pipe = PIPE_B;
|
|
break;
|
|
case TRANS_DDI_EDP_INPUT_C_ONOFF:
|
|
trans_edp_pipe = PIPE_C;
|
|
break;
|
|
}
|
|
|
|
if (trans_edp_pipe == crtc->pipe)
|
|
pipe_config->cpu_transcoder = TRANSCODER_EDP;
|
|
}
|
|
|
|
if (!intel_display_power_is_enabled(dev_priv,
|
|
POWER_DOMAIN_TRANSCODER(pipe_config->cpu_transcoder)))
|
|
return false;
|
|
|
|
tmp = I915_READ(PIPECONF(pipe_config->cpu_transcoder));
|
|
if (!(tmp & PIPECONF_ENABLE))
|
|
return false;
|
|
|
|
haswell_get_ddi_port_state(crtc, pipe_config);
|
|
|
|
intel_get_pipe_timings(crtc, pipe_config);
|
|
|
|
if (INTEL_INFO(dev)->gen >= 9) {
|
|
skl_init_scalers(dev, crtc, pipe_config);
|
|
}
|
|
|
|
pfit_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
|
|
|
|
if (INTEL_INFO(dev)->gen >= 9) {
|
|
pipe_config->scaler_state.scaler_id = -1;
|
|
pipe_config->scaler_state.scaler_users &= ~(1 << SKL_CRTC_INDEX);
|
|
}
|
|
|
|
if (intel_display_power_is_enabled(dev_priv, pfit_domain)) {
|
|
if (INTEL_INFO(dev)->gen >= 9)
|
|
skylake_get_pfit_config(crtc, pipe_config);
|
|
else
|
|
ironlake_get_pfit_config(crtc, pipe_config);
|
|
}
|
|
|
|
if (IS_HASWELL(dev))
|
|
pipe_config->ips_enabled = hsw_crtc_supports_ips(crtc) &&
|
|
(I915_READ(IPS_CTL) & IPS_ENABLE);
|
|
|
|
if (pipe_config->cpu_transcoder != TRANSCODER_EDP) {
|
|
pipe_config->pixel_multiplier =
|
|
I915_READ(PIPE_MULT(pipe_config->cpu_transcoder)) + 1;
|
|
} else {
|
|
pipe_config->pixel_multiplier = 1;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static void i845_update_cursor(struct drm_crtc *crtc, u32 base)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
uint32_t cntl = 0, size = 0;
|
|
|
|
if (base) {
|
|
unsigned int width = intel_crtc->base.cursor->state->crtc_w;
|
|
unsigned int height = intel_crtc->base.cursor->state->crtc_h;
|
|
unsigned int stride = roundup_pow_of_two(width) * 4;
|
|
|
|
switch (stride) {
|
|
default:
|
|
WARN_ONCE(1, "Invalid cursor width/stride, width=%u, stride=%u\n",
|
|
width, stride);
|
|
stride = 256;
|
|
/* fallthrough */
|
|
case 256:
|
|
case 512:
|
|
case 1024:
|
|
case 2048:
|
|
break;
|
|
}
|
|
|
|
cntl |= CURSOR_ENABLE |
|
|
CURSOR_GAMMA_ENABLE |
|
|
CURSOR_FORMAT_ARGB |
|
|
CURSOR_STRIDE(stride);
|
|
|
|
size = (height << 12) | width;
|
|
}
|
|
|
|
if (intel_crtc->cursor_cntl != 0 &&
|
|
(intel_crtc->cursor_base != base ||
|
|
intel_crtc->cursor_size != size ||
|
|
intel_crtc->cursor_cntl != cntl)) {
|
|
/* On these chipsets we can only modify the base/size/stride
|
|
* whilst the cursor is disabled.
|
|
*/
|
|
I915_WRITE(CURCNTR(PIPE_A), 0);
|
|
POSTING_READ(CURCNTR(PIPE_A));
|
|
intel_crtc->cursor_cntl = 0;
|
|
}
|
|
|
|
if (intel_crtc->cursor_base != base) {
|
|
I915_WRITE(CURBASE(PIPE_A), base);
|
|
intel_crtc->cursor_base = base;
|
|
}
|
|
|
|
if (intel_crtc->cursor_size != size) {
|
|
I915_WRITE(CURSIZE, size);
|
|
intel_crtc->cursor_size = size;
|
|
}
|
|
|
|
if (intel_crtc->cursor_cntl != cntl) {
|
|
I915_WRITE(CURCNTR(PIPE_A), cntl);
|
|
POSTING_READ(CURCNTR(PIPE_A));
|
|
intel_crtc->cursor_cntl = cntl;
|
|
}
|
|
}
|
|
|
|
static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
uint32_t cntl;
|
|
|
|
cntl = 0;
|
|
if (base) {
|
|
cntl = MCURSOR_GAMMA_ENABLE;
|
|
switch (intel_crtc->base.cursor->state->crtc_w) {
|
|
case 64:
|
|
cntl |= CURSOR_MODE_64_ARGB_AX;
|
|
break;
|
|
case 128:
|
|
cntl |= CURSOR_MODE_128_ARGB_AX;
|
|
break;
|
|
case 256:
|
|
cntl |= CURSOR_MODE_256_ARGB_AX;
|
|
break;
|
|
default:
|
|
MISSING_CASE(intel_crtc->base.cursor->state->crtc_w);
|
|
return;
|
|
}
|
|
cntl |= pipe << 28; /* Connect to correct pipe */
|
|
|
|
if (HAS_DDI(dev))
|
|
cntl |= CURSOR_PIPE_CSC_ENABLE;
|
|
}
|
|
|
|
if (crtc->cursor->state->rotation == BIT(DRM_ROTATE_180))
|
|
cntl |= CURSOR_ROTATE_180;
|
|
|
|
if (intel_crtc->cursor_cntl != cntl) {
|
|
I915_WRITE(CURCNTR(pipe), cntl);
|
|
POSTING_READ(CURCNTR(pipe));
|
|
intel_crtc->cursor_cntl = cntl;
|
|
}
|
|
|
|
/* and commit changes on next vblank */
|
|
I915_WRITE(CURBASE(pipe), base);
|
|
POSTING_READ(CURBASE(pipe));
|
|
|
|
intel_crtc->cursor_base = base;
|
|
}
|
|
|
|
/* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
|
|
static void intel_crtc_update_cursor(struct drm_crtc *crtc,
|
|
bool on)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
struct drm_plane_state *cursor_state = crtc->cursor->state;
|
|
int x = cursor_state->crtc_x;
|
|
int y = cursor_state->crtc_y;
|
|
u32 base = 0, pos = 0;
|
|
|
|
if (on)
|
|
base = intel_crtc->cursor_addr;
|
|
|
|
if (x >= intel_crtc->config->pipe_src_w)
|
|
base = 0;
|
|
|
|
if (y >= intel_crtc->config->pipe_src_h)
|
|
base = 0;
|
|
|
|
if (x < 0) {
|
|
if (x + cursor_state->crtc_w <= 0)
|
|
base = 0;
|
|
|
|
pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
|
|
x = -x;
|
|
}
|
|
pos |= x << CURSOR_X_SHIFT;
|
|
|
|
if (y < 0) {
|
|
if (y + cursor_state->crtc_h <= 0)
|
|
base = 0;
|
|
|
|
pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
|
|
y = -y;
|
|
}
|
|
pos |= y << CURSOR_Y_SHIFT;
|
|
|
|
if (base == 0 && intel_crtc->cursor_base == 0)
|
|
return;
|
|
|
|
I915_WRITE(CURPOS(pipe), pos);
|
|
|
|
/* ILK+ do this automagically */
|
|
if (HAS_GMCH_DISPLAY(dev) &&
|
|
crtc->cursor->state->rotation == BIT(DRM_ROTATE_180)) {
|
|
base += (cursor_state->crtc_h *
|
|
cursor_state->crtc_w - 1) * 4;
|
|
}
|
|
|
|
if (IS_845G(dev) || IS_I865G(dev))
|
|
i845_update_cursor(crtc, base);
|
|
else
|
|
i9xx_update_cursor(crtc, base);
|
|
}
|
|
|
|
static bool cursor_size_ok(struct drm_device *dev,
|
|
uint32_t width, uint32_t height)
|
|
{
|
|
if (width == 0 || height == 0)
|
|
return false;
|
|
|
|
/*
|
|
* 845g/865g are special in that they are only limited by
|
|
* the width of their cursors, the height is arbitrary up to
|
|
* the precision of the register. Everything else requires
|
|
* square cursors, limited to a few power-of-two sizes.
|
|
*/
|
|
if (IS_845G(dev) || IS_I865G(dev)) {
|
|
if ((width & 63) != 0)
|
|
return false;
|
|
|
|
if (width > (IS_845G(dev) ? 64 : 512))
|
|
return false;
|
|
|
|
if (height > 1023)
|
|
return false;
|
|
} else {
|
|
switch (width | height) {
|
|
case 256:
|
|
case 128:
|
|
if (IS_GEN2(dev))
|
|
return false;
|
|
case 64:
|
|
break;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
|
|
u16 *blue, uint32_t start, uint32_t size)
|
|
{
|
|
int end = (start + size > 256) ? 256 : start + size, i;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
|
|
for (i = start; i < end; i++) {
|
|
intel_crtc->lut_r[i] = red[i] >> 8;
|
|
intel_crtc->lut_g[i] = green[i] >> 8;
|
|
intel_crtc->lut_b[i] = blue[i] >> 8;
|
|
}
|
|
|
|
intel_crtc_load_lut(crtc);
|
|
}
|
|
|
|
/* VESA 640x480x72Hz mode to set on the pipe */
|
|
static struct drm_display_mode load_detect_mode = {
|
|
DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
|
|
704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
|
|
};
|
|
|
|
struct drm_framebuffer *
|
|
__intel_framebuffer_create(struct drm_device *dev,
|
|
struct drm_mode_fb_cmd2 *mode_cmd,
|
|
struct drm_i915_gem_object *obj)
|
|
{
|
|
struct intel_framebuffer *intel_fb;
|
|
int ret;
|
|
|
|
intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
|
|
if (!intel_fb)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return &intel_fb->base;
|
|
|
|
err:
|
|
kfree(intel_fb);
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
static struct drm_framebuffer *
|
|
intel_framebuffer_create(struct drm_device *dev,
|
|
struct drm_mode_fb_cmd2 *mode_cmd,
|
|
struct drm_i915_gem_object *obj)
|
|
{
|
|
struct drm_framebuffer *fb;
|
|
int ret;
|
|
|
|
ret = i915_mutex_lock_interruptible(dev);
|
|
if (ret)
|
|
return ERR_PTR(ret);
|
|
fb = __intel_framebuffer_create(dev, mode_cmd, obj);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
return fb;
|
|
}
|
|
|
|
static u32
|
|
intel_framebuffer_pitch_for_width(int width, int bpp)
|
|
{
|
|
u32 pitch = DIV_ROUND_UP(width * bpp, 8);
|
|
return ALIGN(pitch, 64);
|
|
}
|
|
|
|
static u32
|
|
intel_framebuffer_size_for_mode(struct drm_display_mode *mode, int bpp)
|
|
{
|
|
u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp);
|
|
return PAGE_ALIGN(pitch * mode->vdisplay);
|
|
}
|
|
|
|
static struct drm_framebuffer *
|
|
intel_framebuffer_create_for_mode(struct drm_device *dev,
|
|
struct drm_display_mode *mode,
|
|
int depth, int bpp)
|
|
{
|
|
struct drm_framebuffer *fb;
|
|
struct drm_i915_gem_object *obj;
|
|
struct drm_mode_fb_cmd2 mode_cmd = { 0 };
|
|
|
|
obj = i915_gem_alloc_object(dev,
|
|
intel_framebuffer_size_for_mode(mode, bpp));
|
|
if (obj == NULL)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
mode_cmd.width = mode->hdisplay;
|
|
mode_cmd.height = mode->vdisplay;
|
|
mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width,
|
|
bpp);
|
|
mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth);
|
|
|
|
fb = intel_framebuffer_create(dev, &mode_cmd, obj);
|
|
if (IS_ERR(fb))
|
|
drm_gem_object_unreference_unlocked(&obj->base);
|
|
|
|
return fb;
|
|
}
|
|
|
|
static struct drm_framebuffer *
|
|
mode_fits_in_fbdev(struct drm_device *dev,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
#ifdef CONFIG_DRM_FBDEV_EMULATION
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_i915_gem_object *obj;
|
|
struct drm_framebuffer *fb;
|
|
|
|
if (!dev_priv->fbdev)
|
|
return NULL;
|
|
|
|
if (!dev_priv->fbdev->fb)
|
|
return NULL;
|
|
|
|
obj = dev_priv->fbdev->fb->obj;
|
|
BUG_ON(!obj);
|
|
|
|
fb = &dev_priv->fbdev->fb->base;
|
|
if (fb->pitches[0] < intel_framebuffer_pitch_for_width(mode->hdisplay,
|
|
fb->bits_per_pixel))
|
|
return NULL;
|
|
|
|
if (obj->base.size < mode->vdisplay * fb->pitches[0])
|
|
return NULL;
|
|
|
|
return fb;
|
|
#else
|
|
return NULL;
|
|
#endif
|
|
}
|
|
|
|
static int intel_modeset_setup_plane_state(struct drm_atomic_state *state,
|
|
struct drm_crtc *crtc,
|
|
struct drm_display_mode *mode,
|
|
struct drm_framebuffer *fb,
|
|
int x, int y)
|
|
{
|
|
struct drm_plane_state *plane_state;
|
|
int hdisplay, vdisplay;
|
|
int ret;
|
|
|
|
plane_state = drm_atomic_get_plane_state(state, crtc->primary);
|
|
if (IS_ERR(plane_state))
|
|
return PTR_ERR(plane_state);
|
|
|
|
if (mode)
|
|
drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay);
|
|
else
|
|
hdisplay = vdisplay = 0;
|
|
|
|
ret = drm_atomic_set_crtc_for_plane(plane_state, fb ? crtc : NULL);
|
|
if (ret)
|
|
return ret;
|
|
drm_atomic_set_fb_for_plane(plane_state, fb);
|
|
plane_state->crtc_x = 0;
|
|
plane_state->crtc_y = 0;
|
|
plane_state->crtc_w = hdisplay;
|
|
plane_state->crtc_h = vdisplay;
|
|
plane_state->src_x = x << 16;
|
|
plane_state->src_y = y << 16;
|
|
plane_state->src_w = hdisplay << 16;
|
|
plane_state->src_h = vdisplay << 16;
|
|
|
|
return 0;
|
|
}
|
|
|
|
bool intel_get_load_detect_pipe(struct drm_connector *connector,
|
|
struct drm_display_mode *mode,
|
|
struct intel_load_detect_pipe *old,
|
|
struct drm_modeset_acquire_ctx *ctx)
|
|
{
|
|
struct intel_crtc *intel_crtc;
|
|
struct intel_encoder *intel_encoder =
|
|
intel_attached_encoder(connector);
|
|
struct drm_crtc *possible_crtc;
|
|
struct drm_encoder *encoder = &intel_encoder->base;
|
|
struct drm_crtc *crtc = NULL;
|
|
struct drm_device *dev = encoder->dev;
|
|
struct drm_framebuffer *fb;
|
|
struct drm_mode_config *config = &dev->mode_config;
|
|
struct drm_atomic_state *state = NULL;
|
|
struct drm_connector_state *connector_state;
|
|
struct intel_crtc_state *crtc_state;
|
|
int ret, i = -1;
|
|
|
|
DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
|
|
connector->base.id, connector->name,
|
|
encoder->base.id, encoder->name);
|
|
|
|
retry:
|
|
ret = drm_modeset_lock(&config->connection_mutex, ctx);
|
|
if (ret)
|
|
goto fail;
|
|
|
|
/*
|
|
* Algorithm gets a little messy:
|
|
*
|
|
* - if the connector already has an assigned crtc, use it (but make
|
|
* sure it's on first)
|
|
*
|
|
* - try to find the first unused crtc that can drive this connector,
|
|
* and use that if we find one
|
|
*/
|
|
|
|
/* See if we already have a CRTC for this connector */
|
|
if (encoder->crtc) {
|
|
crtc = encoder->crtc;
|
|
|
|
ret = drm_modeset_lock(&crtc->mutex, ctx);
|
|
if (ret)
|
|
goto fail;
|
|
ret = drm_modeset_lock(&crtc->primary->mutex, ctx);
|
|
if (ret)
|
|
goto fail;
|
|
|
|
old->dpms_mode = connector->dpms;
|
|
old->load_detect_temp = false;
|
|
|
|
/* Make sure the crtc and connector are running */
|
|
if (connector->dpms != DRM_MODE_DPMS_ON)
|
|
connector->funcs->dpms(connector, DRM_MODE_DPMS_ON);
|
|
|
|
return true;
|
|
}
|
|
|
|
/* Find an unused one (if possible) */
|
|
for_each_crtc(dev, possible_crtc) {
|
|
i++;
|
|
if (!(encoder->possible_crtcs & (1 << i)))
|
|
continue;
|
|
if (possible_crtc->state->enable)
|
|
continue;
|
|
|
|
crtc = possible_crtc;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* If we didn't find an unused CRTC, don't use any.
|
|
*/
|
|
if (!crtc) {
|
|
DRM_DEBUG_KMS("no pipe available for load-detect\n");
|
|
goto fail;
|
|
}
|
|
|
|
ret = drm_modeset_lock(&crtc->mutex, ctx);
|
|
if (ret)
|
|
goto fail;
|
|
ret = drm_modeset_lock(&crtc->primary->mutex, ctx);
|
|
if (ret)
|
|
goto fail;
|
|
|
|
intel_crtc = to_intel_crtc(crtc);
|
|
old->dpms_mode = connector->dpms;
|
|
old->load_detect_temp = true;
|
|
old->release_fb = NULL;
|
|
|
|
state = drm_atomic_state_alloc(dev);
|
|
if (!state)
|
|
return false;
|
|
|
|
state->acquire_ctx = ctx;
|
|
|
|
connector_state = drm_atomic_get_connector_state(state, connector);
|
|
if (IS_ERR(connector_state)) {
|
|
ret = PTR_ERR(connector_state);
|
|
goto fail;
|
|
}
|
|
|
|
connector_state->crtc = crtc;
|
|
connector_state->best_encoder = &intel_encoder->base;
|
|
|
|
crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
|
|
if (IS_ERR(crtc_state)) {
|
|
ret = PTR_ERR(crtc_state);
|
|
goto fail;
|
|
}
|
|
|
|
crtc_state->base.active = crtc_state->base.enable = true;
|
|
|
|
if (!mode)
|
|
mode = &load_detect_mode;
|
|
|
|
/* We need a framebuffer large enough to accommodate all accesses
|
|
* that the plane may generate whilst we perform load detection.
|
|
* We can not rely on the fbcon either being present (we get called
|
|
* during its initialisation to detect all boot displays, or it may
|
|
* not even exist) or that it is large enough to satisfy the
|
|
* requested mode.
|
|
*/
|
|
fb = mode_fits_in_fbdev(dev, mode);
|
|
if (fb == NULL) {
|
|
DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
|
|
fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
|
|
old->release_fb = fb;
|
|
} else
|
|
DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
|
|
if (IS_ERR(fb)) {
|
|
DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n");
|
|
goto fail;
|
|
}
|
|
|
|
ret = intel_modeset_setup_plane_state(state, crtc, mode, fb, 0, 0);
|
|
if (ret)
|
|
goto fail;
|
|
|
|
drm_mode_copy(&crtc_state->base.mode, mode);
|
|
|
|
if (drm_atomic_commit(state)) {
|
|
DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
|
|
if (old->release_fb)
|
|
old->release_fb->funcs->destroy(old->release_fb);
|
|
goto fail;
|
|
}
|
|
crtc->primary->crtc = crtc;
|
|
|
|
/* let the connector get through one full cycle before testing */
|
|
intel_wait_for_vblank(dev, intel_crtc->pipe);
|
|
return true;
|
|
|
|
fail:
|
|
drm_atomic_state_free(state);
|
|
state = NULL;
|
|
|
|
if (ret == -EDEADLK) {
|
|
drm_modeset_backoff(ctx);
|
|
goto retry;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
void intel_release_load_detect_pipe(struct drm_connector *connector,
|
|
struct intel_load_detect_pipe *old,
|
|
struct drm_modeset_acquire_ctx *ctx)
|
|
{
|
|
struct drm_device *dev = connector->dev;
|
|
struct intel_encoder *intel_encoder =
|
|
intel_attached_encoder(connector);
|
|
struct drm_encoder *encoder = &intel_encoder->base;
|
|
struct drm_crtc *crtc = encoder->crtc;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct drm_atomic_state *state;
|
|
struct drm_connector_state *connector_state;
|
|
struct intel_crtc_state *crtc_state;
|
|
int ret;
|
|
|
|
DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
|
|
connector->base.id, connector->name,
|
|
encoder->base.id, encoder->name);
|
|
|
|
if (old->load_detect_temp) {
|
|
state = drm_atomic_state_alloc(dev);
|
|
if (!state)
|
|
goto fail;
|
|
|
|
state->acquire_ctx = ctx;
|
|
|
|
connector_state = drm_atomic_get_connector_state(state, connector);
|
|
if (IS_ERR(connector_state))
|
|
goto fail;
|
|
|
|
crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
|
|
if (IS_ERR(crtc_state))
|
|
goto fail;
|
|
|
|
connector_state->best_encoder = NULL;
|
|
connector_state->crtc = NULL;
|
|
|
|
crtc_state->base.enable = crtc_state->base.active = false;
|
|
|
|
ret = intel_modeset_setup_plane_state(state, crtc, NULL, NULL,
|
|
0, 0);
|
|
if (ret)
|
|
goto fail;
|
|
|
|
ret = drm_atomic_commit(state);
|
|
if (ret)
|
|
goto fail;
|
|
|
|
if (old->release_fb) {
|
|
drm_framebuffer_unregister_private(old->release_fb);
|
|
drm_framebuffer_unreference(old->release_fb);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/* Switch crtc and encoder back off if necessary */
|
|
if (old->dpms_mode != DRM_MODE_DPMS_ON)
|
|
connector->funcs->dpms(connector, old->dpms_mode);
|
|
|
|
return;
|
|
fail:
|
|
DRM_DEBUG_KMS("Couldn't release load detect pipe.\n");
|
|
drm_atomic_state_free(state);
|
|
}
|
|
|
|
static int i9xx_pll_refclk(struct drm_device *dev,
|
|
const struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 dpll = pipe_config->dpll_hw_state.dpll;
|
|
|
|
if ((dpll & PLL_REF_INPUT_MASK) == PLLB_REF_INPUT_SPREADSPECTRUMIN)
|
|
return dev_priv->vbt.lvds_ssc_freq;
|
|
else if (HAS_PCH_SPLIT(dev))
|
|
return 120000;
|
|
else if (!IS_GEN2(dev))
|
|
return 96000;
|
|
else
|
|
return 48000;
|
|
}
|
|
|
|
/* Returns the clock of the currently programmed mode of the given pipe. */
|
|
static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int pipe = pipe_config->cpu_transcoder;
|
|
u32 dpll = pipe_config->dpll_hw_state.dpll;
|
|
u32 fp;
|
|
intel_clock_t clock;
|
|
int port_clock;
|
|
int refclk = i9xx_pll_refclk(dev, pipe_config);
|
|
|
|
if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
|
|
fp = pipe_config->dpll_hw_state.fp0;
|
|
else
|
|
fp = pipe_config->dpll_hw_state.fp1;
|
|
|
|
clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
|
|
if (IS_PINEVIEW(dev)) {
|
|
clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1;
|
|
clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT;
|
|
} else {
|
|
clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
|
|
clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
|
|
}
|
|
|
|
if (!IS_GEN2(dev)) {
|
|
if (IS_PINEVIEW(dev))
|
|
clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >>
|
|
DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW);
|
|
else
|
|
clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
|
|
DPLL_FPA01_P1_POST_DIV_SHIFT);
|
|
|
|
switch (dpll & DPLL_MODE_MASK) {
|
|
case DPLLB_MODE_DAC_SERIAL:
|
|
clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
|
|
5 : 10;
|
|
break;
|
|
case DPLLB_MODE_LVDS:
|
|
clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
|
|
7 : 14;
|
|
break;
|
|
default:
|
|
DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
|
|
"mode\n", (int)(dpll & DPLL_MODE_MASK));
|
|
return;
|
|
}
|
|
|
|
if (IS_PINEVIEW(dev))
|
|
port_clock = pnv_calc_dpll_params(refclk, &clock);
|
|
else
|
|
port_clock = i9xx_calc_dpll_params(refclk, &clock);
|
|
} else {
|
|
u32 lvds = IS_I830(dev) ? 0 : I915_READ(LVDS);
|
|
bool is_lvds = (pipe == 1) && (lvds & LVDS_PORT_EN);
|
|
|
|
if (is_lvds) {
|
|
clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
|
|
DPLL_FPA01_P1_POST_DIV_SHIFT);
|
|
|
|
if (lvds & LVDS_CLKB_POWER_UP)
|
|
clock.p2 = 7;
|
|
else
|
|
clock.p2 = 14;
|
|
} else {
|
|
if (dpll & PLL_P1_DIVIDE_BY_TWO)
|
|
clock.p1 = 2;
|
|
else {
|
|
clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
|
|
DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
|
|
}
|
|
if (dpll & PLL_P2_DIVIDE_BY_4)
|
|
clock.p2 = 4;
|
|
else
|
|
clock.p2 = 2;
|
|
}
|
|
|
|
port_clock = i9xx_calc_dpll_params(refclk, &clock);
|
|
}
|
|
|
|
/*
|
|
* This value includes pixel_multiplier. We will use
|
|
* port_clock to compute adjusted_mode.crtc_clock in the
|
|
* encoder's get_config() function.
|
|
*/
|
|
pipe_config->port_clock = port_clock;
|
|
}
|
|
|
|
int intel_dotclock_calculate(int link_freq,
|
|
const struct intel_link_m_n *m_n)
|
|
{
|
|
/*
|
|
* The calculation for the data clock is:
|
|
* pixel_clock = ((m/n)*(link_clock * nr_lanes))/bpp
|
|
* But we want to avoid losing precison if possible, so:
|
|
* pixel_clock = ((m * link_clock * nr_lanes)/(n*bpp))
|
|
*
|
|
* and the link clock is simpler:
|
|
* link_clock = (m * link_clock) / n
|
|
*/
|
|
|
|
if (!m_n->link_n)
|
|
return 0;
|
|
|
|
return div_u64((u64)m_n->link_m * link_freq, m_n->link_n);
|
|
}
|
|
|
|
static void ironlake_pch_clock_get(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
|
|
/* read out port_clock from the DPLL */
|
|
i9xx_crtc_clock_get(crtc, pipe_config);
|
|
|
|
/*
|
|
* This value does not include pixel_multiplier.
|
|
* We will check that port_clock and adjusted_mode.crtc_clock
|
|
* agree once we know their relationship in the encoder's
|
|
* get_config() function.
|
|
*/
|
|
pipe_config->base.adjusted_mode.crtc_clock =
|
|
intel_dotclock_calculate(intel_fdi_link_freq(dev) * 10000,
|
|
&pipe_config->fdi_m_n);
|
|
}
|
|
|
|
/** Returns the currently programmed mode of the given pipe. */
|
|
struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
|
|
struct drm_crtc *crtc)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
|
|
struct drm_display_mode *mode;
|
|
struct intel_crtc_state pipe_config;
|
|
int htot = I915_READ(HTOTAL(cpu_transcoder));
|
|
int hsync = I915_READ(HSYNC(cpu_transcoder));
|
|
int vtot = I915_READ(VTOTAL(cpu_transcoder));
|
|
int vsync = I915_READ(VSYNC(cpu_transcoder));
|
|
enum pipe pipe = intel_crtc->pipe;
|
|
|
|
mode = kzalloc(sizeof(*mode), GFP_KERNEL);
|
|
if (!mode)
|
|
return NULL;
|
|
|
|
/*
|
|
* Construct a pipe_config sufficient for getting the clock info
|
|
* back out of crtc_clock_get.
|
|
*
|
|
* Note, if LVDS ever uses a non-1 pixel multiplier, we'll need
|
|
* to use a real value here instead.
|
|
*/
|
|
pipe_config.cpu_transcoder = (enum transcoder) pipe;
|
|
pipe_config.pixel_multiplier = 1;
|
|
pipe_config.dpll_hw_state.dpll = I915_READ(DPLL(pipe));
|
|
pipe_config.dpll_hw_state.fp0 = I915_READ(FP0(pipe));
|
|
pipe_config.dpll_hw_state.fp1 = I915_READ(FP1(pipe));
|
|
i9xx_crtc_clock_get(intel_crtc, &pipe_config);
|
|
|
|
mode->clock = pipe_config.port_clock / pipe_config.pixel_multiplier;
|
|
mode->hdisplay = (htot & 0xffff) + 1;
|
|
mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
|
|
mode->hsync_start = (hsync & 0xffff) + 1;
|
|
mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
|
|
mode->vdisplay = (vtot & 0xffff) + 1;
|
|
mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
|
|
mode->vsync_start = (vsync & 0xffff) + 1;
|
|
mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
|
|
|
|
drm_mode_set_name(mode);
|
|
|
|
return mode;
|
|
}
|
|
|
|
void intel_mark_busy(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (dev_priv->mm.busy)
|
|
return;
|
|
|
|
intel_runtime_pm_get(dev_priv);
|
|
i915_update_gfx_val(dev_priv);
|
|
if (INTEL_INFO(dev)->gen >= 6)
|
|
gen6_rps_busy(dev_priv);
|
|
dev_priv->mm.busy = true;
|
|
}
|
|
|
|
void intel_mark_idle(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (!dev_priv->mm.busy)
|
|
return;
|
|
|
|
dev_priv->mm.busy = false;
|
|
|
|
if (INTEL_INFO(dev)->gen >= 6)
|
|
gen6_rps_idle(dev->dev_private);
|
|
|
|
intel_runtime_pm_put(dev_priv);
|
|
}
|
|
|
|
static void intel_crtc_destroy(struct drm_crtc *crtc)
|
|
{
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct drm_device *dev = crtc->dev;
|
|
struct intel_unpin_work *work;
|
|
|
|
spin_lock_irq(&dev->event_lock);
|
|
work = intel_crtc->unpin_work;
|
|
intel_crtc->unpin_work = NULL;
|
|
spin_unlock_irq(&dev->event_lock);
|
|
|
|
if (work) {
|
|
cancel_work_sync(&work->work);
|
|
kfree(work);
|
|
}
|
|
|
|
drm_crtc_cleanup(crtc);
|
|
|
|
kfree(intel_crtc);
|
|
}
|
|
|
|
static void intel_unpin_work_fn(struct work_struct *__work)
|
|
{
|
|
struct intel_unpin_work *work =
|
|
container_of(__work, struct intel_unpin_work, work);
|
|
struct intel_crtc *crtc = to_intel_crtc(work->crtc);
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_plane *primary = crtc->base.primary;
|
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
intel_unpin_fb_obj(work->old_fb, primary->state);
|
|
drm_gem_object_unreference(&work->pending_flip_obj->base);
|
|
|
|
if (work->flip_queued_req)
|
|
i915_gem_request_assign(&work->flip_queued_req, NULL);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
intel_frontbuffer_flip_complete(dev, to_intel_plane(primary)->frontbuffer_bit);
|
|
drm_framebuffer_unreference(work->old_fb);
|
|
|
|
BUG_ON(atomic_read(&crtc->unpin_work_count) == 0);
|
|
atomic_dec(&crtc->unpin_work_count);
|
|
|
|
kfree(work);
|
|
}
|
|
|
|
static void do_intel_finish_page_flip(struct drm_device *dev,
|
|
struct drm_crtc *crtc)
|
|
{
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct intel_unpin_work *work;
|
|
unsigned long flags;
|
|
|
|
/* Ignore early vblank irqs */
|
|
if (intel_crtc == NULL)
|
|
return;
|
|
|
|
/*
|
|
* This is called both by irq handlers and the reset code (to complete
|
|
* lost pageflips) so needs the full irqsave spinlocks.
|
|
*/
|
|
spin_lock_irqsave(&dev->event_lock, flags);
|
|
work = intel_crtc->unpin_work;
|
|
|
|
/* Ensure we don't miss a work->pending update ... */
|
|
smp_rmb();
|
|
|
|
if (work == NULL || atomic_read(&work->pending) < INTEL_FLIP_COMPLETE) {
|
|
spin_unlock_irqrestore(&dev->event_lock, flags);
|
|
return;
|
|
}
|
|
|
|
page_flip_completed(intel_crtc);
|
|
|
|
spin_unlock_irqrestore(&dev->event_lock, flags);
|
|
}
|
|
|
|
void intel_finish_page_flip(struct drm_device *dev, int pipe)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
|
|
|
|
do_intel_finish_page_flip(dev, crtc);
|
|
}
|
|
|
|
void intel_finish_page_flip_plane(struct drm_device *dev, int plane)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_crtc *crtc = dev_priv->plane_to_crtc_mapping[plane];
|
|
|
|
do_intel_finish_page_flip(dev, crtc);
|
|
}
|
|
|
|
/* Is 'a' after or equal to 'b'? */
|
|
static bool g4x_flip_count_after_eq(u32 a, u32 b)
|
|
{
|
|
return !((a - b) & 0x80000000);
|
|
}
|
|
|
|
static bool page_flip_finished(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (i915_reset_in_progress(&dev_priv->gpu_error) ||
|
|
crtc->reset_counter != atomic_read(&dev_priv->gpu_error.reset_counter))
|
|
return true;
|
|
|
|
/*
|
|
* The relevant registers doen't exist on pre-ctg.
|
|
* As the flip done interrupt doesn't trigger for mmio
|
|
* flips on gmch platforms, a flip count check isn't
|
|
* really needed there. But since ctg has the registers,
|
|
* include it in the check anyway.
|
|
*/
|
|
if (INTEL_INFO(dev)->gen < 5 && !IS_G4X(dev))
|
|
return true;
|
|
|
|
/*
|
|
* A DSPSURFLIVE check isn't enough in case the mmio and CS flips
|
|
* used the same base address. In that case the mmio flip might
|
|
* have completed, but the CS hasn't even executed the flip yet.
|
|
*
|
|
* A flip count check isn't enough as the CS might have updated
|
|
* the base address just after start of vblank, but before we
|
|
* managed to process the interrupt. This means we'd complete the
|
|
* CS flip too soon.
|
|
*
|
|
* Combining both checks should get us a good enough result. It may
|
|
* still happen that the CS flip has been executed, but has not
|
|
* yet actually completed. But in case the base address is the same
|
|
* anyway, we don't really care.
|
|
*/
|
|
return (I915_READ(DSPSURFLIVE(crtc->plane)) & ~0xfff) ==
|
|
crtc->unpin_work->gtt_offset &&
|
|
g4x_flip_count_after_eq(I915_READ(PIPE_FLIPCOUNT_G4X(crtc->pipe)),
|
|
crtc->unpin_work->flip_count);
|
|
}
|
|
|
|
void intel_prepare_page_flip(struct drm_device *dev, int plane)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc =
|
|
to_intel_crtc(dev_priv->plane_to_crtc_mapping[plane]);
|
|
unsigned long flags;
|
|
|
|
|
|
/*
|
|
* This is called both by irq handlers and the reset code (to complete
|
|
* lost pageflips) so needs the full irqsave spinlocks.
|
|
*
|
|
* NB: An MMIO update of the plane base pointer will also
|
|
* generate a page-flip completion irq, i.e. every modeset
|
|
* is also accompanied by a spurious intel_prepare_page_flip().
|
|
*/
|
|
spin_lock_irqsave(&dev->event_lock, flags);
|
|
if (intel_crtc->unpin_work && page_flip_finished(intel_crtc))
|
|
atomic_inc_not_zero(&intel_crtc->unpin_work->pending);
|
|
spin_unlock_irqrestore(&dev->event_lock, flags);
|
|
}
|
|
|
|
static inline void intel_mark_page_flip_active(struct intel_unpin_work *work)
|
|
{
|
|
/* Ensure that the work item is consistent when activating it ... */
|
|
smp_wmb();
|
|
atomic_set(&work->pending, INTEL_FLIP_PENDING);
|
|
/* and that it is marked active as soon as the irq could fire. */
|
|
smp_wmb();
|
|
}
|
|
|
|
static int intel_gen2_queue_flip(struct drm_device *dev,
|
|
struct drm_crtc *crtc,
|
|
struct drm_framebuffer *fb,
|
|
struct drm_i915_gem_object *obj,
|
|
struct drm_i915_gem_request *req,
|
|
uint32_t flags)
|
|
{
|
|
struct intel_engine_cs *ring = req->ring;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
u32 flip_mask;
|
|
int ret;
|
|
|
|
ret = intel_ring_begin(req, 6);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Can't queue multiple flips, so wait for the previous
|
|
* one to finish before executing the next.
|
|
*/
|
|
if (intel_crtc->plane)
|
|
flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
|
|
else
|
|
flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
|
|
intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
|
|
intel_ring_emit(ring, MI_NOOP);
|
|
intel_ring_emit(ring, MI_DISPLAY_FLIP |
|
|
MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
|
|
intel_ring_emit(ring, fb->pitches[0]);
|
|
intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset);
|
|
intel_ring_emit(ring, 0); /* aux display base address, unused */
|
|
|
|
intel_mark_page_flip_active(intel_crtc->unpin_work);
|
|
return 0;
|
|
}
|
|
|
|
static int intel_gen3_queue_flip(struct drm_device *dev,
|
|
struct drm_crtc *crtc,
|
|
struct drm_framebuffer *fb,
|
|
struct drm_i915_gem_object *obj,
|
|
struct drm_i915_gem_request *req,
|
|
uint32_t flags)
|
|
{
|
|
struct intel_engine_cs *ring = req->ring;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
u32 flip_mask;
|
|
int ret;
|
|
|
|
ret = intel_ring_begin(req, 6);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (intel_crtc->plane)
|
|
flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
|
|
else
|
|
flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
|
|
intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
|
|
intel_ring_emit(ring, MI_NOOP);
|
|
intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 |
|
|
MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
|
|
intel_ring_emit(ring, fb->pitches[0]);
|
|
intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset);
|
|
intel_ring_emit(ring, MI_NOOP);
|
|
|
|
intel_mark_page_flip_active(intel_crtc->unpin_work);
|
|
return 0;
|
|
}
|
|
|
|
static int intel_gen4_queue_flip(struct drm_device *dev,
|
|
struct drm_crtc *crtc,
|
|
struct drm_framebuffer *fb,
|
|
struct drm_i915_gem_object *obj,
|
|
struct drm_i915_gem_request *req,
|
|
uint32_t flags)
|
|
{
|
|
struct intel_engine_cs *ring = req->ring;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
uint32_t pf, pipesrc;
|
|
int ret;
|
|
|
|
ret = intel_ring_begin(req, 4);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* i965+ uses the linear or tiled offsets from the
|
|
* Display Registers (which do not change across a page-flip)
|
|
* so we need only reprogram the base address.
|
|
*/
|
|
intel_ring_emit(ring, MI_DISPLAY_FLIP |
|
|
MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
|
|
intel_ring_emit(ring, fb->pitches[0]);
|
|
intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset |
|
|
obj->tiling_mode);
|
|
|
|
/* XXX Enabling the panel-fitter across page-flip is so far
|
|
* untested on non-native modes, so ignore it for now.
|
|
* pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
|
|
*/
|
|
pf = 0;
|
|
pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
|
|
intel_ring_emit(ring, pf | pipesrc);
|
|
|
|
intel_mark_page_flip_active(intel_crtc->unpin_work);
|
|
return 0;
|
|
}
|
|
|
|
static int intel_gen6_queue_flip(struct drm_device *dev,
|
|
struct drm_crtc *crtc,
|
|
struct drm_framebuffer *fb,
|
|
struct drm_i915_gem_object *obj,
|
|
struct drm_i915_gem_request *req,
|
|
uint32_t flags)
|
|
{
|
|
struct intel_engine_cs *ring = req->ring;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
uint32_t pf, pipesrc;
|
|
int ret;
|
|
|
|
ret = intel_ring_begin(req, 4);
|
|
if (ret)
|
|
return ret;
|
|
|
|
intel_ring_emit(ring, MI_DISPLAY_FLIP |
|
|
MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
|
|
intel_ring_emit(ring, fb->pitches[0] | obj->tiling_mode);
|
|
intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset);
|
|
|
|
/* Contrary to the suggestions in the documentation,
|
|
* "Enable Panel Fitter" does not seem to be required when page
|
|
* flipping with a non-native mode, and worse causes a normal
|
|
* modeset to fail.
|
|
* pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE;
|
|
*/
|
|
pf = 0;
|
|
pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
|
|
intel_ring_emit(ring, pf | pipesrc);
|
|
|
|
intel_mark_page_flip_active(intel_crtc->unpin_work);
|
|
return 0;
|
|
}
|
|
|
|
static int intel_gen7_queue_flip(struct drm_device *dev,
|
|
struct drm_crtc *crtc,
|
|
struct drm_framebuffer *fb,
|
|
struct drm_i915_gem_object *obj,
|
|
struct drm_i915_gem_request *req,
|
|
uint32_t flags)
|
|
{
|
|
struct intel_engine_cs *ring = req->ring;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
uint32_t plane_bit = 0;
|
|
int len, ret;
|
|
|
|
switch (intel_crtc->plane) {
|
|
case PLANE_A:
|
|
plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_A;
|
|
break;
|
|
case PLANE_B:
|
|
plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_B;
|
|
break;
|
|
case PLANE_C:
|
|
plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_C;
|
|
break;
|
|
default:
|
|
WARN_ONCE(1, "unknown plane in flip command\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
len = 4;
|
|
if (ring->id == RCS) {
|
|
len += 6;
|
|
/*
|
|
* On Gen 8, SRM is now taking an extra dword to accommodate
|
|
* 48bits addresses, and we need a NOOP for the batch size to
|
|
* stay even.
|
|
*/
|
|
if (IS_GEN8(dev))
|
|
len += 2;
|
|
}
|
|
|
|
/*
|
|
* BSpec MI_DISPLAY_FLIP for IVB:
|
|
* "The full packet must be contained within the same cache line."
|
|
*
|
|
* Currently the LRI+SRM+MI_DISPLAY_FLIP all fit within the same
|
|
* cacheline, if we ever start emitting more commands before
|
|
* the MI_DISPLAY_FLIP we may need to first emit everything else,
|
|
* then do the cacheline alignment, and finally emit the
|
|
* MI_DISPLAY_FLIP.
|
|
*/
|
|
ret = intel_ring_cacheline_align(req);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = intel_ring_begin(req, len);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Unmask the flip-done completion message. Note that the bspec says that
|
|
* we should do this for both the BCS and RCS, and that we must not unmask
|
|
* more than one flip event at any time (or ensure that one flip message
|
|
* can be sent by waiting for flip-done prior to queueing new flips).
|
|
* Experimentation says that BCS works despite DERRMR masking all
|
|
* flip-done completion events and that unmasking all planes at once
|
|
* for the RCS also doesn't appear to drop events. Setting the DERRMR
|
|
* to zero does lead to lockups within MI_DISPLAY_FLIP.
|
|
*/
|
|
if (ring->id == RCS) {
|
|
intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(1));
|
|
intel_ring_emit_reg(ring, DERRMR);
|
|
intel_ring_emit(ring, ~(DERRMR_PIPEA_PRI_FLIP_DONE |
|
|
DERRMR_PIPEB_PRI_FLIP_DONE |
|
|
DERRMR_PIPEC_PRI_FLIP_DONE));
|
|
if (IS_GEN8(dev))
|
|
intel_ring_emit(ring, MI_STORE_REGISTER_MEM_GEN8 |
|
|
MI_SRM_LRM_GLOBAL_GTT);
|
|
else
|
|
intel_ring_emit(ring, MI_STORE_REGISTER_MEM |
|
|
MI_SRM_LRM_GLOBAL_GTT);
|
|
intel_ring_emit_reg(ring, DERRMR);
|
|
intel_ring_emit(ring, ring->scratch.gtt_offset + 256);
|
|
if (IS_GEN8(dev)) {
|
|
intel_ring_emit(ring, 0);
|
|
intel_ring_emit(ring, MI_NOOP);
|
|
}
|
|
}
|
|
|
|
intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | plane_bit);
|
|
intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode));
|
|
intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset);
|
|
intel_ring_emit(ring, (MI_NOOP));
|
|
|
|
intel_mark_page_flip_active(intel_crtc->unpin_work);
|
|
return 0;
|
|
}
|
|
|
|
static bool use_mmio_flip(struct intel_engine_cs *ring,
|
|
struct drm_i915_gem_object *obj)
|
|
{
|
|
/*
|
|
* This is not being used for older platforms, because
|
|
* non-availability of flip done interrupt forces us to use
|
|
* CS flips. Older platforms derive flip done using some clever
|
|
* tricks involving the flip_pending status bits and vblank irqs.
|
|
* So using MMIO flips there would disrupt this mechanism.
|
|
*/
|
|
|
|
if (ring == NULL)
|
|
return true;
|
|
|
|
if (INTEL_INFO(ring->dev)->gen < 5)
|
|
return false;
|
|
|
|
if (i915.use_mmio_flip < 0)
|
|
return false;
|
|
else if (i915.use_mmio_flip > 0)
|
|
return true;
|
|
else if (i915.enable_execlists)
|
|
return true;
|
|
else
|
|
return ring != i915_gem_request_get_ring(obj->last_write_req);
|
|
}
|
|
|
|
static void skl_do_mmio_flip(struct intel_crtc *intel_crtc,
|
|
unsigned int rotation,
|
|
struct intel_unpin_work *work)
|
|
{
|
|
struct drm_device *dev = intel_crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_framebuffer *fb = intel_crtc->base.primary->fb;
|
|
const enum pipe pipe = intel_crtc->pipe;
|
|
u32 ctl, stride, tile_height;
|
|
|
|
ctl = I915_READ(PLANE_CTL(pipe, 0));
|
|
ctl &= ~PLANE_CTL_TILED_MASK;
|
|
switch (fb->modifier[0]) {
|
|
case DRM_FORMAT_MOD_NONE:
|
|
break;
|
|
case I915_FORMAT_MOD_X_TILED:
|
|
ctl |= PLANE_CTL_TILED_X;
|
|
break;
|
|
case I915_FORMAT_MOD_Y_TILED:
|
|
ctl |= PLANE_CTL_TILED_Y;
|
|
break;
|
|
case I915_FORMAT_MOD_Yf_TILED:
|
|
ctl |= PLANE_CTL_TILED_YF;
|
|
break;
|
|
default:
|
|
MISSING_CASE(fb->modifier[0]);
|
|
}
|
|
|
|
/*
|
|
* The stride is either expressed as a multiple of 64 bytes chunks for
|
|
* linear buffers or in number of tiles for tiled buffers.
|
|
*/
|
|
if (intel_rotation_90_or_270(rotation)) {
|
|
/* stride = Surface height in tiles */
|
|
tile_height = intel_tile_height(dev, fb->pixel_format,
|
|
fb->modifier[0], 0);
|
|
stride = DIV_ROUND_UP(fb->height, tile_height);
|
|
} else {
|
|
stride = fb->pitches[0] /
|
|
intel_fb_stride_alignment(dev, fb->modifier[0],
|
|
fb->pixel_format);
|
|
}
|
|
|
|
/*
|
|
* Both PLANE_CTL and PLANE_STRIDE are not updated on vblank but on
|
|
* PLANE_SURF updates, the update is then guaranteed to be atomic.
|
|
*/
|
|
I915_WRITE(PLANE_CTL(pipe, 0), ctl);
|
|
I915_WRITE(PLANE_STRIDE(pipe, 0), stride);
|
|
|
|
I915_WRITE(PLANE_SURF(pipe, 0), work->gtt_offset);
|
|
POSTING_READ(PLANE_SURF(pipe, 0));
|
|
}
|
|
|
|
static void ilk_do_mmio_flip(struct intel_crtc *intel_crtc,
|
|
struct intel_unpin_work *work)
|
|
{
|
|
struct drm_device *dev = intel_crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_framebuffer *intel_fb =
|
|
to_intel_framebuffer(intel_crtc->base.primary->fb);
|
|
struct drm_i915_gem_object *obj = intel_fb->obj;
|
|
i915_reg_t reg = DSPCNTR(intel_crtc->plane);
|
|
u32 dspcntr;
|
|
|
|
dspcntr = I915_READ(reg);
|
|
|
|
if (obj->tiling_mode != I915_TILING_NONE)
|
|
dspcntr |= DISPPLANE_TILED;
|
|
else
|
|
dspcntr &= ~DISPPLANE_TILED;
|
|
|
|
I915_WRITE(reg, dspcntr);
|
|
|
|
I915_WRITE(DSPSURF(intel_crtc->plane), work->gtt_offset);
|
|
POSTING_READ(DSPSURF(intel_crtc->plane));
|
|
}
|
|
|
|
/*
|
|
* XXX: This is the temporary way to update the plane registers until we get
|
|
* around to using the usual plane update functions for MMIO flips
|
|
*/
|
|
static void intel_do_mmio_flip(struct intel_mmio_flip *mmio_flip)
|
|
{
|
|
struct intel_crtc *crtc = mmio_flip->crtc;
|
|
struct intel_unpin_work *work;
|
|
|
|
spin_lock_irq(&crtc->base.dev->event_lock);
|
|
work = crtc->unpin_work;
|
|
spin_unlock_irq(&crtc->base.dev->event_lock);
|
|
if (work == NULL)
|
|
return;
|
|
|
|
intel_mark_page_flip_active(work);
|
|
|
|
intel_pipe_update_start(crtc);
|
|
|
|
if (INTEL_INFO(mmio_flip->i915)->gen >= 9)
|
|
skl_do_mmio_flip(crtc, mmio_flip->rotation, work);
|
|
else
|
|
/* use_mmio_flip() retricts MMIO flips to ilk+ */
|
|
ilk_do_mmio_flip(crtc, work);
|
|
|
|
intel_pipe_update_end(crtc);
|
|
}
|
|
|
|
static void intel_mmio_flip_work_func(struct work_struct *work)
|
|
{
|
|
struct intel_mmio_flip *mmio_flip =
|
|
container_of(work, struct intel_mmio_flip, work);
|
|
|
|
if (mmio_flip->req) {
|
|
WARN_ON(__i915_wait_request(mmio_flip->req,
|
|
mmio_flip->crtc->reset_counter,
|
|
false, NULL,
|
|
&mmio_flip->i915->rps.mmioflips));
|
|
i915_gem_request_unreference__unlocked(mmio_flip->req);
|
|
}
|
|
|
|
intel_do_mmio_flip(mmio_flip);
|
|
kfree(mmio_flip);
|
|
}
|
|
|
|
static int intel_queue_mmio_flip(struct drm_device *dev,
|
|
struct drm_crtc *crtc,
|
|
struct drm_i915_gem_object *obj)
|
|
{
|
|
struct intel_mmio_flip *mmio_flip;
|
|
|
|
mmio_flip = kmalloc(sizeof(*mmio_flip), GFP_KERNEL);
|
|
if (mmio_flip == NULL)
|
|
return -ENOMEM;
|
|
|
|
mmio_flip->i915 = to_i915(dev);
|
|
mmio_flip->req = i915_gem_request_reference(obj->last_write_req);
|
|
mmio_flip->crtc = to_intel_crtc(crtc);
|
|
mmio_flip->rotation = crtc->primary->state->rotation;
|
|
|
|
INIT_WORK(&mmio_flip->work, intel_mmio_flip_work_func);
|
|
schedule_work(&mmio_flip->work);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int intel_default_queue_flip(struct drm_device *dev,
|
|
struct drm_crtc *crtc,
|
|
struct drm_framebuffer *fb,
|
|
struct drm_i915_gem_object *obj,
|
|
struct drm_i915_gem_request *req,
|
|
uint32_t flags)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
|
|
static bool __intel_pageflip_stall_check(struct drm_device *dev,
|
|
struct drm_crtc *crtc)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct intel_unpin_work *work = intel_crtc->unpin_work;
|
|
u32 addr;
|
|
|
|
if (atomic_read(&work->pending) >= INTEL_FLIP_COMPLETE)
|
|
return true;
|
|
|
|
if (atomic_read(&work->pending) < INTEL_FLIP_PENDING)
|
|
return false;
|
|
|
|
if (!work->enable_stall_check)
|
|
return false;
|
|
|
|
if (work->flip_ready_vblank == 0) {
|
|
if (work->flip_queued_req &&
|
|
!i915_gem_request_completed(work->flip_queued_req, true))
|
|
return false;
|
|
|
|
work->flip_ready_vblank = drm_crtc_vblank_count(crtc);
|
|
}
|
|
|
|
if (drm_crtc_vblank_count(crtc) - work->flip_ready_vblank < 3)
|
|
return false;
|
|
|
|
/* Potential stall - if we see that the flip has happened,
|
|
* assume a missed interrupt. */
|
|
if (INTEL_INFO(dev)->gen >= 4)
|
|
addr = I915_HI_DISPBASE(I915_READ(DSPSURF(intel_crtc->plane)));
|
|
else
|
|
addr = I915_READ(DSPADDR(intel_crtc->plane));
|
|
|
|
/* There is a potential issue here with a false positive after a flip
|
|
* to the same address. We could address this by checking for a
|
|
* non-incrementing frame counter.
|
|
*/
|
|
return addr == work->gtt_offset;
|
|
}
|
|
|
|
void intel_check_page_flip(struct drm_device *dev, int pipe)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct intel_unpin_work *work;
|
|
|
|
WARN_ON(!in_interrupt());
|
|
|
|
if (crtc == NULL)
|
|
return;
|
|
|
|
spin_lock(&dev->event_lock);
|
|
work = intel_crtc->unpin_work;
|
|
if (work != NULL && __intel_pageflip_stall_check(dev, crtc)) {
|
|
WARN_ONCE(1, "Kicking stuck page flip: queued at %d, now %d\n",
|
|
work->flip_queued_vblank, drm_vblank_count(dev, pipe));
|
|
page_flip_completed(intel_crtc);
|
|
work = NULL;
|
|
}
|
|
if (work != NULL &&
|
|
drm_vblank_count(dev, pipe) - work->flip_queued_vblank > 1)
|
|
intel_queue_rps_boost_for_request(dev, work->flip_queued_req);
|
|
spin_unlock(&dev->event_lock);
|
|
}
|
|
|
|
static int intel_crtc_page_flip(struct drm_crtc *crtc,
|
|
struct drm_framebuffer *fb,
|
|
struct drm_pending_vblank_event *event,
|
|
uint32_t page_flip_flags)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_framebuffer *old_fb = crtc->primary->fb;
|
|
struct drm_i915_gem_object *obj = intel_fb_obj(fb);
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct drm_plane *primary = crtc->primary;
|
|
enum pipe pipe = intel_crtc->pipe;
|
|
struct intel_unpin_work *work;
|
|
struct intel_engine_cs *ring;
|
|
bool mmio_flip;
|
|
struct drm_i915_gem_request *request = NULL;
|
|
int ret;
|
|
|
|
/*
|
|
* drm_mode_page_flip_ioctl() should already catch this, but double
|
|
* check to be safe. In the future we may enable pageflipping from
|
|
* a disabled primary plane.
|
|
*/
|
|
if (WARN_ON(intel_fb_obj(old_fb) == NULL))
|
|
return -EBUSY;
|
|
|
|
/* Can't change pixel format via MI display flips. */
|
|
if (fb->pixel_format != crtc->primary->fb->pixel_format)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* TILEOFF/LINOFF registers can't be changed via MI display flips.
|
|
* Note that pitch changes could also affect these register.
|
|
*/
|
|
if (INTEL_INFO(dev)->gen > 3 &&
|
|
(fb->offsets[0] != crtc->primary->fb->offsets[0] ||
|
|
fb->pitches[0] != crtc->primary->fb->pitches[0]))
|
|
return -EINVAL;
|
|
|
|
if (i915_terminally_wedged(&dev_priv->gpu_error))
|
|
goto out_hang;
|
|
|
|
work = kzalloc(sizeof(*work), GFP_KERNEL);
|
|
if (work == NULL)
|
|
return -ENOMEM;
|
|
|
|
work->event = event;
|
|
work->crtc = crtc;
|
|
work->old_fb = old_fb;
|
|
INIT_WORK(&work->work, intel_unpin_work_fn);
|
|
|
|
ret = drm_crtc_vblank_get(crtc);
|
|
if (ret)
|
|
goto free_work;
|
|
|
|
/* We borrow the event spin lock for protecting unpin_work */
|
|
spin_lock_irq(&dev->event_lock);
|
|
if (intel_crtc->unpin_work) {
|
|
/* Before declaring the flip queue wedged, check if
|
|
* the hardware completed the operation behind our backs.
|
|
*/
|
|
if (__intel_pageflip_stall_check(dev, crtc)) {
|
|
DRM_DEBUG_DRIVER("flip queue: previous flip completed, continuing\n");
|
|
page_flip_completed(intel_crtc);
|
|
} else {
|
|
DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
|
|
spin_unlock_irq(&dev->event_lock);
|
|
|
|
drm_crtc_vblank_put(crtc);
|
|
kfree(work);
|
|
return -EBUSY;
|
|
}
|
|
}
|
|
intel_crtc->unpin_work = work;
|
|
spin_unlock_irq(&dev->event_lock);
|
|
|
|
if (atomic_read(&intel_crtc->unpin_work_count) >= 2)
|
|
flush_workqueue(dev_priv->wq);
|
|
|
|
/* Reference the objects for the scheduled work. */
|
|
drm_framebuffer_reference(work->old_fb);
|
|
drm_gem_object_reference(&obj->base);
|
|
|
|
crtc->primary->fb = fb;
|
|
update_state_fb(crtc->primary);
|
|
|
|
work->pending_flip_obj = obj;
|
|
|
|
ret = i915_mutex_lock_interruptible(dev);
|
|
if (ret)
|
|
goto cleanup;
|
|
|
|
atomic_inc(&intel_crtc->unpin_work_count);
|
|
intel_crtc->reset_counter = atomic_read(&dev_priv->gpu_error.reset_counter);
|
|
|
|
if (INTEL_INFO(dev)->gen >= 5 || IS_G4X(dev))
|
|
work->flip_count = I915_READ(PIPE_FLIPCOUNT_G4X(pipe)) + 1;
|
|
|
|
if (IS_VALLEYVIEW(dev)) {
|
|
ring = &dev_priv->ring[BCS];
|
|
if (obj->tiling_mode != intel_fb_obj(work->old_fb)->tiling_mode)
|
|
/* vlv: DISPLAY_FLIP fails to change tiling */
|
|
ring = NULL;
|
|
} else if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) {
|
|
ring = &dev_priv->ring[BCS];
|
|
} else if (INTEL_INFO(dev)->gen >= 7) {
|
|
ring = i915_gem_request_get_ring(obj->last_write_req);
|
|
if (ring == NULL || ring->id != RCS)
|
|
ring = &dev_priv->ring[BCS];
|
|
} else {
|
|
ring = &dev_priv->ring[RCS];
|
|
}
|
|
|
|
mmio_flip = use_mmio_flip(ring, obj);
|
|
|
|
/* When using CS flips, we want to emit semaphores between rings.
|
|
* However, when using mmio flips we will create a task to do the
|
|
* synchronisation, so all we want here is to pin the framebuffer
|
|
* into the display plane and skip any waits.
|
|
*/
|
|
if (!mmio_flip) {
|
|
ret = i915_gem_object_sync(obj, ring, &request);
|
|
if (ret)
|
|
goto cleanup_pending;
|
|
}
|
|
|
|
ret = intel_pin_and_fence_fb_obj(crtc->primary, fb,
|
|
crtc->primary->state);
|
|
if (ret)
|
|
goto cleanup_pending;
|
|
|
|
work->gtt_offset = intel_plane_obj_offset(to_intel_plane(primary),
|
|
obj, 0);
|
|
work->gtt_offset += intel_crtc->dspaddr_offset;
|
|
|
|
if (mmio_flip) {
|
|
ret = intel_queue_mmio_flip(dev, crtc, obj);
|
|
if (ret)
|
|
goto cleanup_unpin;
|
|
|
|
i915_gem_request_assign(&work->flip_queued_req,
|
|
obj->last_write_req);
|
|
} else {
|
|
if (!request) {
|
|
ret = i915_gem_request_alloc(ring, ring->default_context, &request);
|
|
if (ret)
|
|
goto cleanup_unpin;
|
|
}
|
|
|
|
ret = dev_priv->display.queue_flip(dev, crtc, fb, obj, request,
|
|
page_flip_flags);
|
|
if (ret)
|
|
goto cleanup_unpin;
|
|
|
|
i915_gem_request_assign(&work->flip_queued_req, request);
|
|
}
|
|
|
|
if (request)
|
|
i915_add_request_no_flush(request);
|
|
|
|
work->flip_queued_vblank = drm_crtc_vblank_count(crtc);
|
|
work->enable_stall_check = true;
|
|
|
|
i915_gem_track_fb(intel_fb_obj(work->old_fb), obj,
|
|
to_intel_plane(primary)->frontbuffer_bit);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
intel_fbc_disable_crtc(intel_crtc);
|
|
intel_frontbuffer_flip_prepare(dev,
|
|
to_intel_plane(primary)->frontbuffer_bit);
|
|
|
|
trace_i915_flip_request(intel_crtc->plane, obj);
|
|
|
|
return 0;
|
|
|
|
cleanup_unpin:
|
|
intel_unpin_fb_obj(fb, crtc->primary->state);
|
|
cleanup_pending:
|
|
if (request)
|
|
i915_gem_request_cancel(request);
|
|
atomic_dec(&intel_crtc->unpin_work_count);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
cleanup:
|
|
crtc->primary->fb = old_fb;
|
|
update_state_fb(crtc->primary);
|
|
|
|
drm_gem_object_unreference_unlocked(&obj->base);
|
|
drm_framebuffer_unreference(work->old_fb);
|
|
|
|
spin_lock_irq(&dev->event_lock);
|
|
intel_crtc->unpin_work = NULL;
|
|
spin_unlock_irq(&dev->event_lock);
|
|
|
|
drm_crtc_vblank_put(crtc);
|
|
free_work:
|
|
kfree(work);
|
|
|
|
if (ret == -EIO) {
|
|
struct drm_atomic_state *state;
|
|
struct drm_plane_state *plane_state;
|
|
|
|
out_hang:
|
|
state = drm_atomic_state_alloc(dev);
|
|
if (!state)
|
|
return -ENOMEM;
|
|
state->acquire_ctx = drm_modeset_legacy_acquire_ctx(crtc);
|
|
|
|
retry:
|
|
plane_state = drm_atomic_get_plane_state(state, primary);
|
|
ret = PTR_ERR_OR_ZERO(plane_state);
|
|
if (!ret) {
|
|
drm_atomic_set_fb_for_plane(plane_state, fb);
|
|
|
|
ret = drm_atomic_set_crtc_for_plane(plane_state, crtc);
|
|
if (!ret)
|
|
ret = drm_atomic_commit(state);
|
|
}
|
|
|
|
if (ret == -EDEADLK) {
|
|
drm_modeset_backoff(state->acquire_ctx);
|
|
drm_atomic_state_clear(state);
|
|
goto retry;
|
|
}
|
|
|
|
if (ret)
|
|
drm_atomic_state_free(state);
|
|
|
|
if (ret == 0 && event) {
|
|
spin_lock_irq(&dev->event_lock);
|
|
drm_send_vblank_event(dev, pipe, event);
|
|
spin_unlock_irq(&dev->event_lock);
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
|
|
/**
|
|
* intel_wm_need_update - Check whether watermarks need updating
|
|
* @plane: drm plane
|
|
* @state: new plane state
|
|
*
|
|
* Check current plane state versus the new one to determine whether
|
|
* watermarks need to be recalculated.
|
|
*
|
|
* Returns true or false.
|
|
*/
|
|
static bool intel_wm_need_update(struct drm_plane *plane,
|
|
struct drm_plane_state *state)
|
|
{
|
|
struct intel_plane_state *new = to_intel_plane_state(state);
|
|
struct intel_plane_state *cur = to_intel_plane_state(plane->state);
|
|
|
|
/* Update watermarks on tiling or size changes. */
|
|
if (!plane->state->fb || !state->fb ||
|
|
plane->state->fb->modifier[0] != state->fb->modifier[0] ||
|
|
plane->state->rotation != state->rotation ||
|
|
drm_rect_width(&new->src) != drm_rect_width(&cur->src) ||
|
|
drm_rect_height(&new->src) != drm_rect_height(&cur->src) ||
|
|
drm_rect_width(&new->dst) != drm_rect_width(&cur->dst) ||
|
|
drm_rect_height(&new->dst) != drm_rect_height(&cur->dst))
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
static bool needs_scaling(struct intel_plane_state *state)
|
|
{
|
|
int src_w = drm_rect_width(&state->src) >> 16;
|
|
int src_h = drm_rect_height(&state->src) >> 16;
|
|
int dst_w = drm_rect_width(&state->dst);
|
|
int dst_h = drm_rect_height(&state->dst);
|
|
|
|
return (src_w != dst_w || src_h != dst_h);
|
|
}
|
|
|
|
int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
|
|
struct drm_plane_state *plane_state)
|
|
{
|
|
struct drm_crtc *crtc = crtc_state->crtc;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct drm_plane *plane = plane_state->plane;
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_plane_state *old_plane_state =
|
|
to_intel_plane_state(plane->state);
|
|
int idx = intel_crtc->base.base.id, ret;
|
|
int i = drm_plane_index(plane);
|
|
bool mode_changed = needs_modeset(crtc_state);
|
|
bool was_crtc_enabled = crtc->state->active;
|
|
bool is_crtc_enabled = crtc_state->active;
|
|
bool turn_off, turn_on, visible, was_visible;
|
|
struct drm_framebuffer *fb = plane_state->fb;
|
|
|
|
if (crtc_state && INTEL_INFO(dev)->gen >= 9 &&
|
|
plane->type != DRM_PLANE_TYPE_CURSOR) {
|
|
ret = skl_update_scaler_plane(
|
|
to_intel_crtc_state(crtc_state),
|
|
to_intel_plane_state(plane_state));
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
was_visible = old_plane_state->visible;
|
|
visible = to_intel_plane_state(plane_state)->visible;
|
|
|
|
if (!was_crtc_enabled && WARN_ON(was_visible))
|
|
was_visible = false;
|
|
|
|
if (!is_crtc_enabled && WARN_ON(visible))
|
|
visible = false;
|
|
|
|
if (!was_visible && !visible)
|
|
return 0;
|
|
|
|
turn_off = was_visible && (!visible || mode_changed);
|
|
turn_on = visible && (!was_visible || mode_changed);
|
|
|
|
DRM_DEBUG_ATOMIC("[CRTC:%i] has [PLANE:%i] with fb %i\n", idx,
|
|
plane->base.id, fb ? fb->base.id : -1);
|
|
|
|
DRM_DEBUG_ATOMIC("[PLANE:%i] visible %i -> %i, off %i, on %i, ms %i\n",
|
|
plane->base.id, was_visible, visible,
|
|
turn_off, turn_on, mode_changed);
|
|
|
|
if (turn_on) {
|
|
intel_crtc->atomic.update_wm_pre = true;
|
|
/* must disable cxsr around plane enable/disable */
|
|
if (plane->type != DRM_PLANE_TYPE_CURSOR) {
|
|
intel_crtc->atomic.disable_cxsr = true;
|
|
/* to potentially re-enable cxsr */
|
|
intel_crtc->atomic.wait_vblank = true;
|
|
intel_crtc->atomic.update_wm_post = true;
|
|
}
|
|
} else if (turn_off) {
|
|
intel_crtc->atomic.update_wm_post = true;
|
|
/* must disable cxsr around plane enable/disable */
|
|
if (plane->type != DRM_PLANE_TYPE_CURSOR) {
|
|
if (is_crtc_enabled)
|
|
intel_crtc->atomic.wait_vblank = true;
|
|
intel_crtc->atomic.disable_cxsr = true;
|
|
}
|
|
} else if (intel_wm_need_update(plane, plane_state)) {
|
|
intel_crtc->atomic.update_wm_pre = true;
|
|
}
|
|
|
|
if (visible || was_visible)
|
|
intel_crtc->atomic.fb_bits |=
|
|
to_intel_plane(plane)->frontbuffer_bit;
|
|
|
|
switch (plane->type) {
|
|
case DRM_PLANE_TYPE_PRIMARY:
|
|
intel_crtc->atomic.pre_disable_primary = turn_off;
|
|
intel_crtc->atomic.post_enable_primary = turn_on;
|
|
|
|
if (turn_off) {
|
|
/*
|
|
* FIXME: Actually if we will still have any other
|
|
* plane enabled on the pipe we could let IPS enabled
|
|
* still, but for now lets consider that when we make
|
|
* primary invisible by setting DSPCNTR to 0 on
|
|
* update_primary_plane function IPS needs to be
|
|
* disable.
|
|
*/
|
|
intel_crtc->atomic.disable_ips = true;
|
|
|
|
intel_crtc->atomic.disable_fbc = true;
|
|
}
|
|
|
|
/*
|
|
* FBC does not work on some platforms for rotated
|
|
* planes, so disable it when rotation is not 0 and
|
|
* update it when rotation is set back to 0.
|
|
*
|
|
* FIXME: This is redundant with the fbc update done in
|
|
* the primary plane enable function except that that
|
|
* one is done too late. We eventually need to unify
|
|
* this.
|
|
*/
|
|
|
|
if (visible &&
|
|
INTEL_INFO(dev)->gen <= 4 && !IS_G4X(dev) &&
|
|
dev_priv->fbc.crtc == intel_crtc &&
|
|
plane_state->rotation != BIT(DRM_ROTATE_0))
|
|
intel_crtc->atomic.disable_fbc = true;
|
|
|
|
/*
|
|
* BDW signals flip done immediately if the plane
|
|
* is disabled, even if the plane enable is already
|
|
* armed to occur at the next vblank :(
|
|
*/
|
|
if (turn_on && IS_BROADWELL(dev))
|
|
intel_crtc->atomic.wait_vblank = true;
|
|
|
|
intel_crtc->atomic.update_fbc |= visible || mode_changed;
|
|
break;
|
|
case DRM_PLANE_TYPE_CURSOR:
|
|
break;
|
|
case DRM_PLANE_TYPE_OVERLAY:
|
|
/*
|
|
* WaCxSRDisabledForSpriteScaling:ivb
|
|
*
|
|
* cstate->update_wm was already set above, so this flag will
|
|
* take effect when we commit and program watermarks.
|
|
*/
|
|
if (IS_IVYBRIDGE(dev) &&
|
|
needs_scaling(to_intel_plane_state(plane_state)) &&
|
|
!needs_scaling(old_plane_state)) {
|
|
to_intel_crtc_state(crtc_state)->disable_lp_wm = true;
|
|
} else if (turn_off && !mode_changed) {
|
|
intel_crtc->atomic.wait_vblank = true;
|
|
intel_crtc->atomic.update_sprite_watermarks |=
|
|
1 << i;
|
|
}
|
|
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static bool encoders_cloneable(const struct intel_encoder *a,
|
|
const struct intel_encoder *b)
|
|
{
|
|
/* masks could be asymmetric, so check both ways */
|
|
return a == b || (a->cloneable & (1 << b->type) &&
|
|
b->cloneable & (1 << a->type));
|
|
}
|
|
|
|
static bool check_single_encoder_cloning(struct drm_atomic_state *state,
|
|
struct intel_crtc *crtc,
|
|
struct intel_encoder *encoder)
|
|
{
|
|
struct intel_encoder *source_encoder;
|
|
struct drm_connector *connector;
|
|
struct drm_connector_state *connector_state;
|
|
int i;
|
|
|
|
for_each_connector_in_state(state, connector, connector_state, i) {
|
|
if (connector_state->crtc != &crtc->base)
|
|
continue;
|
|
|
|
source_encoder =
|
|
to_intel_encoder(connector_state->best_encoder);
|
|
if (!encoders_cloneable(encoder, source_encoder))
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool check_encoder_cloning(struct drm_atomic_state *state,
|
|
struct intel_crtc *crtc)
|
|
{
|
|
struct intel_encoder *encoder;
|
|
struct drm_connector *connector;
|
|
struct drm_connector_state *connector_state;
|
|
int i;
|
|
|
|
for_each_connector_in_state(state, connector, connector_state, i) {
|
|
if (connector_state->crtc != &crtc->base)
|
|
continue;
|
|
|
|
encoder = to_intel_encoder(connector_state->best_encoder);
|
|
if (!check_single_encoder_cloning(state, crtc, encoder))
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static int intel_crtc_atomic_check(struct drm_crtc *crtc,
|
|
struct drm_crtc_state *crtc_state)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct intel_crtc_state *pipe_config =
|
|
to_intel_crtc_state(crtc_state);
|
|
struct drm_atomic_state *state = crtc_state->state;
|
|
int ret;
|
|
bool mode_changed = needs_modeset(crtc_state);
|
|
|
|
if (mode_changed && !check_encoder_cloning(state, intel_crtc)) {
|
|
DRM_DEBUG_KMS("rejecting invalid cloning configuration\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (mode_changed && !crtc_state->active)
|
|
intel_crtc->atomic.update_wm_post = true;
|
|
|
|
if (mode_changed && crtc_state->enable &&
|
|
dev_priv->display.crtc_compute_clock &&
|
|
!WARN_ON(pipe_config->shared_dpll != DPLL_ID_PRIVATE)) {
|
|
ret = dev_priv->display.crtc_compute_clock(intel_crtc,
|
|
pipe_config);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = 0;
|
|
if (dev_priv->display.compute_pipe_wm) {
|
|
ret = dev_priv->display.compute_pipe_wm(intel_crtc, state);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
if (INTEL_INFO(dev)->gen >= 9) {
|
|
if (mode_changed)
|
|
ret = skl_update_scaler_crtc(pipe_config);
|
|
|
|
if (!ret)
|
|
ret = intel_atomic_setup_scalers(dev, intel_crtc,
|
|
pipe_config);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct drm_crtc_helper_funcs intel_helper_funcs = {
|
|
.mode_set_base_atomic = intel_pipe_set_base_atomic,
|
|
.load_lut = intel_crtc_load_lut,
|
|
.atomic_begin = intel_begin_crtc_commit,
|
|
.atomic_flush = intel_finish_crtc_commit,
|
|
.atomic_check = intel_crtc_atomic_check,
|
|
};
|
|
|
|
static void intel_modeset_update_connector_atomic_state(struct drm_device *dev)
|
|
{
|
|
struct intel_connector *connector;
|
|
|
|
for_each_intel_connector(dev, connector) {
|
|
if (connector->base.encoder) {
|
|
connector->base.state->best_encoder =
|
|
connector->base.encoder;
|
|
connector->base.state->crtc =
|
|
connector->base.encoder->crtc;
|
|
} else {
|
|
connector->base.state->best_encoder = NULL;
|
|
connector->base.state->crtc = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
connected_sink_compute_bpp(struct intel_connector *connector,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
int bpp = pipe_config->pipe_bpp;
|
|
|
|
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] checking for sink bpp constrains\n",
|
|
connector->base.base.id,
|
|
connector->base.name);
|
|
|
|
/* Don't use an invalid EDID bpc value */
|
|
if (connector->base.display_info.bpc &&
|
|
connector->base.display_info.bpc * 3 < bpp) {
|
|
DRM_DEBUG_KMS("clamping display bpp (was %d) to EDID reported max of %d\n",
|
|
bpp, connector->base.display_info.bpc*3);
|
|
pipe_config->pipe_bpp = connector->base.display_info.bpc*3;
|
|
}
|
|
|
|
/* Clamp bpp to 8 on screens without EDID 1.4 */
|
|
if (connector->base.display_info.bpc == 0 && bpp > 24) {
|
|
DRM_DEBUG_KMS("clamping display bpp (was %d) to default limit of 24\n",
|
|
bpp);
|
|
pipe_config->pipe_bpp = 24;
|
|
}
|
|
}
|
|
|
|
static int
|
|
compute_baseline_pipe_bpp(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_atomic_state *state;
|
|
struct drm_connector *connector;
|
|
struct drm_connector_state *connector_state;
|
|
int bpp, i;
|
|
|
|
if ((IS_G4X(dev) || IS_VALLEYVIEW(dev)))
|
|
bpp = 10*3;
|
|
else if (INTEL_INFO(dev)->gen >= 5)
|
|
bpp = 12*3;
|
|
else
|
|
bpp = 8*3;
|
|
|
|
|
|
pipe_config->pipe_bpp = bpp;
|
|
|
|
state = pipe_config->base.state;
|
|
|
|
/* Clamp display bpp to EDID value */
|
|
for_each_connector_in_state(state, connector, connector_state, i) {
|
|
if (connector_state->crtc != &crtc->base)
|
|
continue;
|
|
|
|
connected_sink_compute_bpp(to_intel_connector(connector),
|
|
pipe_config);
|
|
}
|
|
|
|
return bpp;
|
|
}
|
|
|
|
static void intel_dump_crtc_timings(const struct drm_display_mode *mode)
|
|
{
|
|
DRM_DEBUG_KMS("crtc timings: %d %d %d %d %d %d %d %d %d, "
|
|
"type: 0x%x flags: 0x%x\n",
|
|
mode->crtc_clock,
|
|
mode->crtc_hdisplay, mode->crtc_hsync_start,
|
|
mode->crtc_hsync_end, mode->crtc_htotal,
|
|
mode->crtc_vdisplay, mode->crtc_vsync_start,
|
|
mode->crtc_vsync_end, mode->crtc_vtotal, mode->type, mode->flags);
|
|
}
|
|
|
|
static void intel_dump_pipe_config(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *pipe_config,
|
|
const char *context)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_plane *plane;
|
|
struct intel_plane *intel_plane;
|
|
struct intel_plane_state *state;
|
|
struct drm_framebuffer *fb;
|
|
|
|
DRM_DEBUG_KMS("[CRTC:%d]%s config %p for pipe %c\n", crtc->base.base.id,
|
|
context, pipe_config, pipe_name(crtc->pipe));
|
|
|
|
DRM_DEBUG_KMS("cpu_transcoder: %c\n", transcoder_name(pipe_config->cpu_transcoder));
|
|
DRM_DEBUG_KMS("pipe bpp: %i, dithering: %i\n",
|
|
pipe_config->pipe_bpp, pipe_config->dither);
|
|
DRM_DEBUG_KMS("fdi/pch: %i, lanes: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
|
|
pipe_config->has_pch_encoder,
|
|
pipe_config->fdi_lanes,
|
|
pipe_config->fdi_m_n.gmch_m, pipe_config->fdi_m_n.gmch_n,
|
|
pipe_config->fdi_m_n.link_m, pipe_config->fdi_m_n.link_n,
|
|
pipe_config->fdi_m_n.tu);
|
|
DRM_DEBUG_KMS("dp: %i, lanes: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
|
|
pipe_config->has_dp_encoder,
|
|
pipe_config->lane_count,
|
|
pipe_config->dp_m_n.gmch_m, pipe_config->dp_m_n.gmch_n,
|
|
pipe_config->dp_m_n.link_m, pipe_config->dp_m_n.link_n,
|
|
pipe_config->dp_m_n.tu);
|
|
|
|
DRM_DEBUG_KMS("dp: %i, lanes: %i, gmch_m2: %u, gmch_n2: %u, link_m2: %u, link_n2: %u, tu2: %u\n",
|
|
pipe_config->has_dp_encoder,
|
|
pipe_config->lane_count,
|
|
pipe_config->dp_m2_n2.gmch_m,
|
|
pipe_config->dp_m2_n2.gmch_n,
|
|
pipe_config->dp_m2_n2.link_m,
|
|
pipe_config->dp_m2_n2.link_n,
|
|
pipe_config->dp_m2_n2.tu);
|
|
|
|
DRM_DEBUG_KMS("audio: %i, infoframes: %i\n",
|
|
pipe_config->has_audio,
|
|
pipe_config->has_infoframe);
|
|
|
|
DRM_DEBUG_KMS("requested mode:\n");
|
|
drm_mode_debug_printmodeline(&pipe_config->base.mode);
|
|
DRM_DEBUG_KMS("adjusted mode:\n");
|
|
drm_mode_debug_printmodeline(&pipe_config->base.adjusted_mode);
|
|
intel_dump_crtc_timings(&pipe_config->base.adjusted_mode);
|
|
DRM_DEBUG_KMS("port clock: %d\n", pipe_config->port_clock);
|
|
DRM_DEBUG_KMS("pipe src size: %dx%d\n",
|
|
pipe_config->pipe_src_w, pipe_config->pipe_src_h);
|
|
DRM_DEBUG_KMS("num_scalers: %d, scaler_users: 0x%x, scaler_id: %d\n",
|
|
crtc->num_scalers,
|
|
pipe_config->scaler_state.scaler_users,
|
|
pipe_config->scaler_state.scaler_id);
|
|
DRM_DEBUG_KMS("gmch pfit: control: 0x%08x, ratios: 0x%08x, lvds border: 0x%08x\n",
|
|
pipe_config->gmch_pfit.control,
|
|
pipe_config->gmch_pfit.pgm_ratios,
|
|
pipe_config->gmch_pfit.lvds_border_bits);
|
|
DRM_DEBUG_KMS("pch pfit: pos: 0x%08x, size: 0x%08x, %s\n",
|
|
pipe_config->pch_pfit.pos,
|
|
pipe_config->pch_pfit.size,
|
|
pipe_config->pch_pfit.enabled ? "enabled" : "disabled");
|
|
DRM_DEBUG_KMS("ips: %i\n", pipe_config->ips_enabled);
|
|
DRM_DEBUG_KMS("double wide: %i\n", pipe_config->double_wide);
|
|
|
|
if (IS_BROXTON(dev)) {
|
|
DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: ebb0: 0x%x, ebb4: 0x%x,"
|
|
"pll0: 0x%x, pll1: 0x%x, pll2: 0x%x, pll3: 0x%x, "
|
|
"pll6: 0x%x, pll8: 0x%x, pll9: 0x%x, pll10: 0x%x, pcsdw12: 0x%x\n",
|
|
pipe_config->ddi_pll_sel,
|
|
pipe_config->dpll_hw_state.ebb0,
|
|
pipe_config->dpll_hw_state.ebb4,
|
|
pipe_config->dpll_hw_state.pll0,
|
|
pipe_config->dpll_hw_state.pll1,
|
|
pipe_config->dpll_hw_state.pll2,
|
|
pipe_config->dpll_hw_state.pll3,
|
|
pipe_config->dpll_hw_state.pll6,
|
|
pipe_config->dpll_hw_state.pll8,
|
|
pipe_config->dpll_hw_state.pll9,
|
|
pipe_config->dpll_hw_state.pll10,
|
|
pipe_config->dpll_hw_state.pcsdw12);
|
|
} else if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
|
|
DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: "
|
|
"ctrl1: 0x%x, cfgcr1: 0x%x, cfgcr2: 0x%x\n",
|
|
pipe_config->ddi_pll_sel,
|
|
pipe_config->dpll_hw_state.ctrl1,
|
|
pipe_config->dpll_hw_state.cfgcr1,
|
|
pipe_config->dpll_hw_state.cfgcr2);
|
|
} else if (HAS_DDI(dev)) {
|
|
DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: wrpll: 0x%x\n",
|
|
pipe_config->ddi_pll_sel,
|
|
pipe_config->dpll_hw_state.wrpll);
|
|
} else {
|
|
DRM_DEBUG_KMS("dpll_hw_state: dpll: 0x%x, dpll_md: 0x%x, "
|
|
"fp0: 0x%x, fp1: 0x%x\n",
|
|
pipe_config->dpll_hw_state.dpll,
|
|
pipe_config->dpll_hw_state.dpll_md,
|
|
pipe_config->dpll_hw_state.fp0,
|
|
pipe_config->dpll_hw_state.fp1);
|
|
}
|
|
|
|
DRM_DEBUG_KMS("planes on this crtc\n");
|
|
list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
|
|
intel_plane = to_intel_plane(plane);
|
|
if (intel_plane->pipe != crtc->pipe)
|
|
continue;
|
|
|
|
state = to_intel_plane_state(plane->state);
|
|
fb = state->base.fb;
|
|
if (!fb) {
|
|
DRM_DEBUG_KMS("%s PLANE:%d plane: %u.%u idx: %d "
|
|
"disabled, scaler_id = %d\n",
|
|
plane->type == DRM_PLANE_TYPE_CURSOR ? "CURSOR" : "STANDARD",
|
|
plane->base.id, intel_plane->pipe,
|
|
(crtc->base.primary == plane) ? 0 : intel_plane->plane + 1,
|
|
drm_plane_index(plane), state->scaler_id);
|
|
continue;
|
|
}
|
|
|
|
DRM_DEBUG_KMS("%s PLANE:%d plane: %u.%u idx: %d enabled",
|
|
plane->type == DRM_PLANE_TYPE_CURSOR ? "CURSOR" : "STANDARD",
|
|
plane->base.id, intel_plane->pipe,
|
|
crtc->base.primary == plane ? 0 : intel_plane->plane + 1,
|
|
drm_plane_index(plane));
|
|
DRM_DEBUG_KMS("\tFB:%d, fb = %ux%u format = 0x%x",
|
|
fb->base.id, fb->width, fb->height, fb->pixel_format);
|
|
DRM_DEBUG_KMS("\tscaler:%d src (%u, %u) %ux%u dst (%u, %u) %ux%u\n",
|
|
state->scaler_id,
|
|
state->src.x1 >> 16, state->src.y1 >> 16,
|
|
drm_rect_width(&state->src) >> 16,
|
|
drm_rect_height(&state->src) >> 16,
|
|
state->dst.x1, state->dst.y1,
|
|
drm_rect_width(&state->dst), drm_rect_height(&state->dst));
|
|
}
|
|
}
|
|
|
|
static bool check_digital_port_conflicts(struct drm_atomic_state *state)
|
|
{
|
|
struct drm_device *dev = state->dev;
|
|
struct intel_encoder *encoder;
|
|
struct drm_connector *connector;
|
|
struct drm_connector_state *connector_state;
|
|
unsigned int used_ports = 0;
|
|
int i;
|
|
|
|
/*
|
|
* Walk the connector list instead of the encoder
|
|
* list to detect the problem on ddi platforms
|
|
* where there's just one encoder per digital port.
|
|
*/
|
|
for_each_connector_in_state(state, connector, connector_state, i) {
|
|
if (!connector_state->best_encoder)
|
|
continue;
|
|
|
|
encoder = to_intel_encoder(connector_state->best_encoder);
|
|
|
|
WARN_ON(!connector_state->crtc);
|
|
|
|
switch (encoder->type) {
|
|
unsigned int port_mask;
|
|
case INTEL_OUTPUT_UNKNOWN:
|
|
if (WARN_ON(!HAS_DDI(dev)))
|
|
break;
|
|
case INTEL_OUTPUT_DISPLAYPORT:
|
|
case INTEL_OUTPUT_HDMI:
|
|
case INTEL_OUTPUT_EDP:
|
|
port_mask = 1 << enc_to_dig_port(&encoder->base)->port;
|
|
|
|
/* the same port mustn't appear more than once */
|
|
if (used_ports & port_mask)
|
|
return false;
|
|
|
|
used_ports |= port_mask;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static void
|
|
clear_intel_crtc_state(struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct drm_crtc_state tmp_state;
|
|
struct intel_crtc_scaler_state scaler_state;
|
|
struct intel_dpll_hw_state dpll_hw_state;
|
|
enum intel_dpll_id shared_dpll;
|
|
uint32_t ddi_pll_sel;
|
|
bool force_thru;
|
|
|
|
/* FIXME: before the switch to atomic started, a new pipe_config was
|
|
* kzalloc'd. Code that depends on any field being zero should be
|
|
* fixed, so that the crtc_state can be safely duplicated. For now,
|
|
* only fields that are know to not cause problems are preserved. */
|
|
|
|
tmp_state = crtc_state->base;
|
|
scaler_state = crtc_state->scaler_state;
|
|
shared_dpll = crtc_state->shared_dpll;
|
|
dpll_hw_state = crtc_state->dpll_hw_state;
|
|
ddi_pll_sel = crtc_state->ddi_pll_sel;
|
|
force_thru = crtc_state->pch_pfit.force_thru;
|
|
|
|
memset(crtc_state, 0, sizeof *crtc_state);
|
|
|
|
crtc_state->base = tmp_state;
|
|
crtc_state->scaler_state = scaler_state;
|
|
crtc_state->shared_dpll = shared_dpll;
|
|
crtc_state->dpll_hw_state = dpll_hw_state;
|
|
crtc_state->ddi_pll_sel = ddi_pll_sel;
|
|
crtc_state->pch_pfit.force_thru = force_thru;
|
|
}
|
|
|
|
static int
|
|
intel_modeset_pipe_config(struct drm_crtc *crtc,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_atomic_state *state = pipe_config->base.state;
|
|
struct intel_encoder *encoder;
|
|
struct drm_connector *connector;
|
|
struct drm_connector_state *connector_state;
|
|
int base_bpp, ret = -EINVAL;
|
|
int i;
|
|
bool retry = true;
|
|
|
|
clear_intel_crtc_state(pipe_config);
|
|
|
|
pipe_config->cpu_transcoder =
|
|
(enum transcoder) to_intel_crtc(crtc)->pipe;
|
|
|
|
/*
|
|
* Sanitize sync polarity flags based on requested ones. If neither
|
|
* positive or negative polarity is requested, treat this as meaning
|
|
* negative polarity.
|
|
*/
|
|
if (!(pipe_config->base.adjusted_mode.flags &
|
|
(DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NHSYNC)))
|
|
pipe_config->base.adjusted_mode.flags |= DRM_MODE_FLAG_NHSYNC;
|
|
|
|
if (!(pipe_config->base.adjusted_mode.flags &
|
|
(DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC)))
|
|
pipe_config->base.adjusted_mode.flags |= DRM_MODE_FLAG_NVSYNC;
|
|
|
|
base_bpp = compute_baseline_pipe_bpp(to_intel_crtc(crtc),
|
|
pipe_config);
|
|
if (base_bpp < 0)
|
|
goto fail;
|
|
|
|
/*
|
|
* Determine the real pipe dimensions. Note that stereo modes can
|
|
* increase the actual pipe size due to the frame doubling and
|
|
* insertion of additional space for blanks between the frame. This
|
|
* is stored in the crtc timings. We use the requested mode to do this
|
|
* computation to clearly distinguish it from the adjusted mode, which
|
|
* can be changed by the connectors in the below retry loop.
|
|
*/
|
|
drm_crtc_get_hv_timing(&pipe_config->base.mode,
|
|
&pipe_config->pipe_src_w,
|
|
&pipe_config->pipe_src_h);
|
|
|
|
encoder_retry:
|
|
/* Ensure the port clock defaults are reset when retrying. */
|
|
pipe_config->port_clock = 0;
|
|
pipe_config->pixel_multiplier = 1;
|
|
|
|
/* Fill in default crtc timings, allow encoders to overwrite them. */
|
|
drm_mode_set_crtcinfo(&pipe_config->base.adjusted_mode,
|
|
CRTC_STEREO_DOUBLE);
|
|
|
|
/* Pass our mode to the connectors and the CRTC to give them a chance to
|
|
* adjust it according to limitations or connector properties, and also
|
|
* a chance to reject the mode entirely.
|
|
*/
|
|
for_each_connector_in_state(state, connector, connector_state, i) {
|
|
if (connector_state->crtc != crtc)
|
|
continue;
|
|
|
|
encoder = to_intel_encoder(connector_state->best_encoder);
|
|
|
|
if (!(encoder->compute_config(encoder, pipe_config))) {
|
|
DRM_DEBUG_KMS("Encoder config failure\n");
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
/* Set default port clock if not overwritten by the encoder. Needs to be
|
|
* done afterwards in case the encoder adjusts the mode. */
|
|
if (!pipe_config->port_clock)
|
|
pipe_config->port_clock = pipe_config->base.adjusted_mode.crtc_clock
|
|
* pipe_config->pixel_multiplier;
|
|
|
|
ret = intel_crtc_compute_config(to_intel_crtc(crtc), pipe_config);
|
|
if (ret < 0) {
|
|
DRM_DEBUG_KMS("CRTC fixup failed\n");
|
|
goto fail;
|
|
}
|
|
|
|
if (ret == RETRY) {
|
|
if (WARN(!retry, "loop in pipe configuration computation\n")) {
|
|
ret = -EINVAL;
|
|
goto fail;
|
|
}
|
|
|
|
DRM_DEBUG_KMS("CRTC bw constrained, retrying\n");
|
|
retry = false;
|
|
goto encoder_retry;
|
|
}
|
|
|
|
/* Dithering seems to not pass-through bits correctly when it should, so
|
|
* only enable it on 6bpc panels. */
|
|
pipe_config->dither = pipe_config->pipe_bpp == 6*3;
|
|
DRM_DEBUG_KMS("hw max bpp: %i, pipe bpp: %i, dithering: %i\n",
|
|
base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
|
|
|
|
fail:
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
intel_modeset_update_crtc_state(struct drm_atomic_state *state)
|
|
{
|
|
struct drm_crtc *crtc;
|
|
struct drm_crtc_state *crtc_state;
|
|
int i;
|
|
|
|
/* Double check state. */
|
|
for_each_crtc_in_state(state, crtc, crtc_state, i) {
|
|
to_intel_crtc(crtc)->config = to_intel_crtc_state(crtc->state);
|
|
|
|
/* Update hwmode for vblank functions */
|
|
if (crtc->state->active)
|
|
crtc->hwmode = crtc->state->adjusted_mode;
|
|
else
|
|
crtc->hwmode.crtc_clock = 0;
|
|
|
|
/*
|
|
* Update legacy state to satisfy fbc code. This can
|
|
* be removed when fbc uses the atomic state.
|
|
*/
|
|
if (drm_atomic_get_existing_plane_state(state, crtc->primary)) {
|
|
struct drm_plane_state *plane_state = crtc->primary->state;
|
|
|
|
crtc->primary->fb = plane_state->fb;
|
|
crtc->x = plane_state->src_x >> 16;
|
|
crtc->y = plane_state->src_y >> 16;
|
|
}
|
|
}
|
|
}
|
|
|
|
static bool intel_fuzzy_clock_check(int clock1, int clock2)
|
|
{
|
|
int diff;
|
|
|
|
if (clock1 == clock2)
|
|
return true;
|
|
|
|
if (!clock1 || !clock2)
|
|
return false;
|
|
|
|
diff = abs(clock1 - clock2);
|
|
|
|
if (((((diff + clock1 + clock2) * 100)) / (clock1 + clock2)) < 105)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
#define for_each_intel_crtc_masked(dev, mask, intel_crtc) \
|
|
list_for_each_entry((intel_crtc), \
|
|
&(dev)->mode_config.crtc_list, \
|
|
base.head) \
|
|
if (mask & (1 <<(intel_crtc)->pipe))
|
|
|
|
static bool
|
|
intel_compare_m_n(unsigned int m, unsigned int n,
|
|
unsigned int m2, unsigned int n2,
|
|
bool exact)
|
|
{
|
|
if (m == m2 && n == n2)
|
|
return true;
|
|
|
|
if (exact || !m || !n || !m2 || !n2)
|
|
return false;
|
|
|
|
BUILD_BUG_ON(DATA_LINK_M_N_MASK > INT_MAX);
|
|
|
|
if (m > m2) {
|
|
while (m > m2) {
|
|
m2 <<= 1;
|
|
n2 <<= 1;
|
|
}
|
|
} else if (m < m2) {
|
|
while (m < m2) {
|
|
m <<= 1;
|
|
n <<= 1;
|
|
}
|
|
}
|
|
|
|
return m == m2 && n == n2;
|
|
}
|
|
|
|
static bool
|
|
intel_compare_link_m_n(const struct intel_link_m_n *m_n,
|
|
struct intel_link_m_n *m2_n2,
|
|
bool adjust)
|
|
{
|
|
if (m_n->tu == m2_n2->tu &&
|
|
intel_compare_m_n(m_n->gmch_m, m_n->gmch_n,
|
|
m2_n2->gmch_m, m2_n2->gmch_n, !adjust) &&
|
|
intel_compare_m_n(m_n->link_m, m_n->link_n,
|
|
m2_n2->link_m, m2_n2->link_n, !adjust)) {
|
|
if (adjust)
|
|
*m2_n2 = *m_n;
|
|
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static bool
|
|
intel_pipe_config_compare(struct drm_device *dev,
|
|
struct intel_crtc_state *current_config,
|
|
struct intel_crtc_state *pipe_config,
|
|
bool adjust)
|
|
{
|
|
bool ret = true;
|
|
|
|
#define INTEL_ERR_OR_DBG_KMS(fmt, ...) \
|
|
do { \
|
|
if (!adjust) \
|
|
DRM_ERROR(fmt, ##__VA_ARGS__); \
|
|
else \
|
|
DRM_DEBUG_KMS(fmt, ##__VA_ARGS__); \
|
|
} while (0)
|
|
|
|
#define PIPE_CONF_CHECK_X(name) \
|
|
if (current_config->name != pipe_config->name) { \
|
|
INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
|
|
"(expected 0x%08x, found 0x%08x)\n", \
|
|
current_config->name, \
|
|
pipe_config->name); \
|
|
ret = false; \
|
|
}
|
|
|
|
#define PIPE_CONF_CHECK_I(name) \
|
|
if (current_config->name != pipe_config->name) { \
|
|
INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
|
|
"(expected %i, found %i)\n", \
|
|
current_config->name, \
|
|
pipe_config->name); \
|
|
ret = false; \
|
|
}
|
|
|
|
#define PIPE_CONF_CHECK_M_N(name) \
|
|
if (!intel_compare_link_m_n(¤t_config->name, \
|
|
&pipe_config->name,\
|
|
adjust)) { \
|
|
INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
|
|
"(expected tu %i gmch %i/%i link %i/%i, " \
|
|
"found tu %i, gmch %i/%i link %i/%i)\n", \
|
|
current_config->name.tu, \
|
|
current_config->name.gmch_m, \
|
|
current_config->name.gmch_n, \
|
|
current_config->name.link_m, \
|
|
current_config->name.link_n, \
|
|
pipe_config->name.tu, \
|
|
pipe_config->name.gmch_m, \
|
|
pipe_config->name.gmch_n, \
|
|
pipe_config->name.link_m, \
|
|
pipe_config->name.link_n); \
|
|
ret = false; \
|
|
}
|
|
|
|
#define PIPE_CONF_CHECK_M_N_ALT(name, alt_name) \
|
|
if (!intel_compare_link_m_n(¤t_config->name, \
|
|
&pipe_config->name, adjust) && \
|
|
!intel_compare_link_m_n(¤t_config->alt_name, \
|
|
&pipe_config->name, adjust)) { \
|
|
INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
|
|
"(expected tu %i gmch %i/%i link %i/%i, " \
|
|
"or tu %i gmch %i/%i link %i/%i, " \
|
|
"found tu %i, gmch %i/%i link %i/%i)\n", \
|
|
current_config->name.tu, \
|
|
current_config->name.gmch_m, \
|
|
current_config->name.gmch_n, \
|
|
current_config->name.link_m, \
|
|
current_config->name.link_n, \
|
|
current_config->alt_name.tu, \
|
|
current_config->alt_name.gmch_m, \
|
|
current_config->alt_name.gmch_n, \
|
|
current_config->alt_name.link_m, \
|
|
current_config->alt_name.link_n, \
|
|
pipe_config->name.tu, \
|
|
pipe_config->name.gmch_m, \
|
|
pipe_config->name.gmch_n, \
|
|
pipe_config->name.link_m, \
|
|
pipe_config->name.link_n); \
|
|
ret = false; \
|
|
}
|
|
|
|
/* This is required for BDW+ where there is only one set of registers for
|
|
* switching between high and low RR.
|
|
* This macro can be used whenever a comparison has to be made between one
|
|
* hw state and multiple sw state variables.
|
|
*/
|
|
#define PIPE_CONF_CHECK_I_ALT(name, alt_name) \
|
|
if ((current_config->name != pipe_config->name) && \
|
|
(current_config->alt_name != pipe_config->name)) { \
|
|
INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
|
|
"(expected %i or %i, found %i)\n", \
|
|
current_config->name, \
|
|
current_config->alt_name, \
|
|
pipe_config->name); \
|
|
ret = false; \
|
|
}
|
|
|
|
#define PIPE_CONF_CHECK_FLAGS(name, mask) \
|
|
if ((current_config->name ^ pipe_config->name) & (mask)) { \
|
|
INTEL_ERR_OR_DBG_KMS("mismatch in " #name "(" #mask ") " \
|
|
"(expected %i, found %i)\n", \
|
|
current_config->name & (mask), \
|
|
pipe_config->name & (mask)); \
|
|
ret = false; \
|
|
}
|
|
|
|
#define PIPE_CONF_CHECK_CLOCK_FUZZY(name) \
|
|
if (!intel_fuzzy_clock_check(current_config->name, pipe_config->name)) { \
|
|
INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
|
|
"(expected %i, found %i)\n", \
|
|
current_config->name, \
|
|
pipe_config->name); \
|
|
ret = false; \
|
|
}
|
|
|
|
#define PIPE_CONF_QUIRK(quirk) \
|
|
((current_config->quirks | pipe_config->quirks) & (quirk))
|
|
|
|
PIPE_CONF_CHECK_I(cpu_transcoder);
|
|
|
|
PIPE_CONF_CHECK_I(has_pch_encoder);
|
|
PIPE_CONF_CHECK_I(fdi_lanes);
|
|
PIPE_CONF_CHECK_M_N(fdi_m_n);
|
|
|
|
PIPE_CONF_CHECK_I(has_dp_encoder);
|
|
PIPE_CONF_CHECK_I(lane_count);
|
|
|
|
if (INTEL_INFO(dev)->gen < 8) {
|
|
PIPE_CONF_CHECK_M_N(dp_m_n);
|
|
|
|
PIPE_CONF_CHECK_I(has_drrs);
|
|
if (current_config->has_drrs)
|
|
PIPE_CONF_CHECK_M_N(dp_m2_n2);
|
|
} else
|
|
PIPE_CONF_CHECK_M_N_ALT(dp_m_n, dp_m2_n2);
|
|
|
|
PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hdisplay);
|
|
PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_htotal);
|
|
PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hblank_start);
|
|
PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hblank_end);
|
|
PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hsync_start);
|
|
PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hsync_end);
|
|
|
|
PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vdisplay);
|
|
PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vtotal);
|
|
PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vblank_start);
|
|
PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vblank_end);
|
|
PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vsync_start);
|
|
PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vsync_end);
|
|
|
|
PIPE_CONF_CHECK_I(pixel_multiplier);
|
|
PIPE_CONF_CHECK_I(has_hdmi_sink);
|
|
if ((INTEL_INFO(dev)->gen < 8 && !IS_HASWELL(dev)) ||
|
|
IS_VALLEYVIEW(dev))
|
|
PIPE_CONF_CHECK_I(limited_color_range);
|
|
PIPE_CONF_CHECK_I(has_infoframe);
|
|
|
|
PIPE_CONF_CHECK_I(has_audio);
|
|
|
|
PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
|
|
DRM_MODE_FLAG_INTERLACE);
|
|
|
|
if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS)) {
|
|
PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
|
|
DRM_MODE_FLAG_PHSYNC);
|
|
PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
|
|
DRM_MODE_FLAG_NHSYNC);
|
|
PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
|
|
DRM_MODE_FLAG_PVSYNC);
|
|
PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
|
|
DRM_MODE_FLAG_NVSYNC);
|
|
}
|
|
|
|
PIPE_CONF_CHECK_X(gmch_pfit.control);
|
|
/* pfit ratios are autocomputed by the hw on gen4+ */
|
|
if (INTEL_INFO(dev)->gen < 4)
|
|
PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios);
|
|
PIPE_CONF_CHECK_X(gmch_pfit.lvds_border_bits);
|
|
|
|
if (!adjust) {
|
|
PIPE_CONF_CHECK_I(pipe_src_w);
|
|
PIPE_CONF_CHECK_I(pipe_src_h);
|
|
|
|
PIPE_CONF_CHECK_I(pch_pfit.enabled);
|
|
if (current_config->pch_pfit.enabled) {
|
|
PIPE_CONF_CHECK_X(pch_pfit.pos);
|
|
PIPE_CONF_CHECK_X(pch_pfit.size);
|
|
}
|
|
|
|
PIPE_CONF_CHECK_I(scaler_state.scaler_id);
|
|
}
|
|
|
|
/* BDW+ don't expose a synchronous way to read the state */
|
|
if (IS_HASWELL(dev))
|
|
PIPE_CONF_CHECK_I(ips_enabled);
|
|
|
|
PIPE_CONF_CHECK_I(double_wide);
|
|
|
|
PIPE_CONF_CHECK_X(ddi_pll_sel);
|
|
|
|
PIPE_CONF_CHECK_I(shared_dpll);
|
|
PIPE_CONF_CHECK_X(dpll_hw_state.dpll);
|
|
PIPE_CONF_CHECK_X(dpll_hw_state.dpll_md);
|
|
PIPE_CONF_CHECK_X(dpll_hw_state.fp0);
|
|
PIPE_CONF_CHECK_X(dpll_hw_state.fp1);
|
|
PIPE_CONF_CHECK_X(dpll_hw_state.wrpll);
|
|
PIPE_CONF_CHECK_X(dpll_hw_state.ctrl1);
|
|
PIPE_CONF_CHECK_X(dpll_hw_state.cfgcr1);
|
|
PIPE_CONF_CHECK_X(dpll_hw_state.cfgcr2);
|
|
|
|
if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5)
|
|
PIPE_CONF_CHECK_I(pipe_bpp);
|
|
|
|
PIPE_CONF_CHECK_CLOCK_FUZZY(base.adjusted_mode.crtc_clock);
|
|
PIPE_CONF_CHECK_CLOCK_FUZZY(port_clock);
|
|
|
|
#undef PIPE_CONF_CHECK_X
|
|
#undef PIPE_CONF_CHECK_I
|
|
#undef PIPE_CONF_CHECK_I_ALT
|
|
#undef PIPE_CONF_CHECK_FLAGS
|
|
#undef PIPE_CONF_CHECK_CLOCK_FUZZY
|
|
#undef PIPE_CONF_QUIRK
|
|
#undef INTEL_ERR_OR_DBG_KMS
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void check_wm_state(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct skl_ddb_allocation hw_ddb, *sw_ddb;
|
|
struct intel_crtc *intel_crtc;
|
|
int plane;
|
|
|
|
if (INTEL_INFO(dev)->gen < 9)
|
|
return;
|
|
|
|
skl_ddb_get_hw_state(dev_priv, &hw_ddb);
|
|
sw_ddb = &dev_priv->wm.skl_hw.ddb;
|
|
|
|
for_each_intel_crtc(dev, intel_crtc) {
|
|
struct skl_ddb_entry *hw_entry, *sw_entry;
|
|
const enum pipe pipe = intel_crtc->pipe;
|
|
|
|
if (!intel_crtc->active)
|
|
continue;
|
|
|
|
/* planes */
|
|
for_each_plane(dev_priv, pipe, plane) {
|
|
hw_entry = &hw_ddb.plane[pipe][plane];
|
|
sw_entry = &sw_ddb->plane[pipe][plane];
|
|
|
|
if (skl_ddb_entry_equal(hw_entry, sw_entry))
|
|
continue;
|
|
|
|
DRM_ERROR("mismatch in DDB state pipe %c plane %d "
|
|
"(expected (%u,%u), found (%u,%u))\n",
|
|
pipe_name(pipe), plane + 1,
|
|
sw_entry->start, sw_entry->end,
|
|
hw_entry->start, hw_entry->end);
|
|
}
|
|
|
|
/* cursor */
|
|
hw_entry = &hw_ddb.plane[pipe][PLANE_CURSOR];
|
|
sw_entry = &sw_ddb->plane[pipe][PLANE_CURSOR];
|
|
|
|
if (skl_ddb_entry_equal(hw_entry, sw_entry))
|
|
continue;
|
|
|
|
DRM_ERROR("mismatch in DDB state pipe %c cursor "
|
|
"(expected (%u,%u), found (%u,%u))\n",
|
|
pipe_name(pipe),
|
|
sw_entry->start, sw_entry->end,
|
|
hw_entry->start, hw_entry->end);
|
|
}
|
|
}
|
|
|
|
static void
|
|
check_connector_state(struct drm_device *dev,
|
|
struct drm_atomic_state *old_state)
|
|
{
|
|
struct drm_connector_state *old_conn_state;
|
|
struct drm_connector *connector;
|
|
int i;
|
|
|
|
for_each_connector_in_state(old_state, connector, old_conn_state, i) {
|
|
struct drm_encoder *encoder = connector->encoder;
|
|
struct drm_connector_state *state = connector->state;
|
|
|
|
/* This also checks the encoder/connector hw state with the
|
|
* ->get_hw_state callbacks. */
|
|
intel_connector_check_state(to_intel_connector(connector));
|
|
|
|
I915_STATE_WARN(state->best_encoder != encoder,
|
|
"connector's atomic encoder doesn't match legacy encoder\n");
|
|
}
|
|
}
|
|
|
|
static void
|
|
check_encoder_state(struct drm_device *dev)
|
|
{
|
|
struct intel_encoder *encoder;
|
|
struct intel_connector *connector;
|
|
|
|
for_each_intel_encoder(dev, encoder) {
|
|
bool enabled = false;
|
|
enum pipe pipe;
|
|
|
|
DRM_DEBUG_KMS("[ENCODER:%d:%s]\n",
|
|
encoder->base.base.id,
|
|
encoder->base.name);
|
|
|
|
for_each_intel_connector(dev, connector) {
|
|
if (connector->base.state->best_encoder != &encoder->base)
|
|
continue;
|
|
enabled = true;
|
|
|
|
I915_STATE_WARN(connector->base.state->crtc !=
|
|
encoder->base.crtc,
|
|
"connector's crtc doesn't match encoder crtc\n");
|
|
}
|
|
|
|
I915_STATE_WARN(!!encoder->base.crtc != enabled,
|
|
"encoder's enabled state mismatch "
|
|
"(expected %i, found %i)\n",
|
|
!!encoder->base.crtc, enabled);
|
|
|
|
if (!encoder->base.crtc) {
|
|
bool active;
|
|
|
|
active = encoder->get_hw_state(encoder, &pipe);
|
|
I915_STATE_WARN(active,
|
|
"encoder detached but still enabled on pipe %c.\n",
|
|
pipe_name(pipe));
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
check_crtc_state(struct drm_device *dev, struct drm_atomic_state *old_state)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_encoder *encoder;
|
|
struct drm_crtc_state *old_crtc_state;
|
|
struct drm_crtc *crtc;
|
|
int i;
|
|
|
|
for_each_crtc_in_state(old_state, crtc, old_crtc_state, i) {
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct intel_crtc_state *pipe_config, *sw_config;
|
|
bool active;
|
|
|
|
if (!needs_modeset(crtc->state) &&
|
|
!to_intel_crtc_state(crtc->state)->update_pipe)
|
|
continue;
|
|
|
|
__drm_atomic_helper_crtc_destroy_state(crtc, old_crtc_state);
|
|
pipe_config = to_intel_crtc_state(old_crtc_state);
|
|
memset(pipe_config, 0, sizeof(*pipe_config));
|
|
pipe_config->base.crtc = crtc;
|
|
pipe_config->base.state = old_state;
|
|
|
|
DRM_DEBUG_KMS("[CRTC:%d]\n",
|
|
crtc->base.id);
|
|
|
|
active = dev_priv->display.get_pipe_config(intel_crtc,
|
|
pipe_config);
|
|
|
|
/* hw state is inconsistent with the pipe quirk */
|
|
if ((intel_crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
|
|
(intel_crtc->pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
|
|
active = crtc->state->active;
|
|
|
|
I915_STATE_WARN(crtc->state->active != active,
|
|
"crtc active state doesn't match with hw state "
|
|
"(expected %i, found %i)\n", crtc->state->active, active);
|
|
|
|
I915_STATE_WARN(intel_crtc->active != crtc->state->active,
|
|
"transitional active state does not match atomic hw state "
|
|
"(expected %i, found %i)\n", crtc->state->active, intel_crtc->active);
|
|
|
|
for_each_encoder_on_crtc(dev, crtc, encoder) {
|
|
enum pipe pipe;
|
|
|
|
active = encoder->get_hw_state(encoder, &pipe);
|
|
I915_STATE_WARN(active != crtc->state->active,
|
|
"[ENCODER:%i] active %i with crtc active %i\n",
|
|
encoder->base.base.id, active, crtc->state->active);
|
|
|
|
I915_STATE_WARN(active && intel_crtc->pipe != pipe,
|
|
"Encoder connected to wrong pipe %c\n",
|
|
pipe_name(pipe));
|
|
|
|
if (active)
|
|
encoder->get_config(encoder, pipe_config);
|
|
}
|
|
|
|
if (!crtc->state->active)
|
|
continue;
|
|
|
|
sw_config = to_intel_crtc_state(crtc->state);
|
|
if (!intel_pipe_config_compare(dev, sw_config,
|
|
pipe_config, false)) {
|
|
I915_STATE_WARN(1, "pipe state doesn't match!\n");
|
|
intel_dump_pipe_config(intel_crtc, pipe_config,
|
|
"[hw state]");
|
|
intel_dump_pipe_config(intel_crtc, sw_config,
|
|
"[sw state]");
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
check_shared_dpll_state(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *crtc;
|
|
struct intel_dpll_hw_state dpll_hw_state;
|
|
int i;
|
|
|
|
for (i = 0; i < dev_priv->num_shared_dpll; i++) {
|
|
struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
|
|
int enabled_crtcs = 0, active_crtcs = 0;
|
|
bool active;
|
|
|
|
memset(&dpll_hw_state, 0, sizeof(dpll_hw_state));
|
|
|
|
DRM_DEBUG_KMS("%s\n", pll->name);
|
|
|
|
active = pll->get_hw_state(dev_priv, pll, &dpll_hw_state);
|
|
|
|
I915_STATE_WARN(pll->active > hweight32(pll->config.crtc_mask),
|
|
"more active pll users than references: %i vs %i\n",
|
|
pll->active, hweight32(pll->config.crtc_mask));
|
|
I915_STATE_WARN(pll->active && !pll->on,
|
|
"pll in active use but not on in sw tracking\n");
|
|
I915_STATE_WARN(pll->on && !pll->active,
|
|
"pll in on but not on in use in sw tracking\n");
|
|
I915_STATE_WARN(pll->on != active,
|
|
"pll on state mismatch (expected %i, found %i)\n",
|
|
pll->on, active);
|
|
|
|
for_each_intel_crtc(dev, crtc) {
|
|
if (crtc->base.state->enable && intel_crtc_to_shared_dpll(crtc) == pll)
|
|
enabled_crtcs++;
|
|
if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll)
|
|
active_crtcs++;
|
|
}
|
|
I915_STATE_WARN(pll->active != active_crtcs,
|
|
"pll active crtcs mismatch (expected %i, found %i)\n",
|
|
pll->active, active_crtcs);
|
|
I915_STATE_WARN(hweight32(pll->config.crtc_mask) != enabled_crtcs,
|
|
"pll enabled crtcs mismatch (expected %i, found %i)\n",
|
|
hweight32(pll->config.crtc_mask), enabled_crtcs);
|
|
|
|
I915_STATE_WARN(pll->on && memcmp(&pll->config.hw_state, &dpll_hw_state,
|
|
sizeof(dpll_hw_state)),
|
|
"pll hw state mismatch\n");
|
|
}
|
|
}
|
|
|
|
static void
|
|
intel_modeset_check_state(struct drm_device *dev,
|
|
struct drm_atomic_state *old_state)
|
|
{
|
|
check_wm_state(dev);
|
|
check_connector_state(dev, old_state);
|
|
check_encoder_state(dev);
|
|
check_crtc_state(dev, old_state);
|
|
check_shared_dpll_state(dev);
|
|
}
|
|
|
|
void ironlake_check_encoder_dotclock(const struct intel_crtc_state *pipe_config,
|
|
int dotclock)
|
|
{
|
|
/*
|
|
* FDI already provided one idea for the dotclock.
|
|
* Yell if the encoder disagrees.
|
|
*/
|
|
WARN(!intel_fuzzy_clock_check(pipe_config->base.adjusted_mode.crtc_clock, dotclock),
|
|
"FDI dotclock and encoder dotclock mismatch, fdi: %i, encoder: %i\n",
|
|
pipe_config->base.adjusted_mode.crtc_clock, dotclock);
|
|
}
|
|
|
|
static void update_scanline_offset(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
|
|
/*
|
|
* The scanline counter increments at the leading edge of hsync.
|
|
*
|
|
* On most platforms it starts counting from vtotal-1 on the
|
|
* first active line. That means the scanline counter value is
|
|
* always one less than what we would expect. Ie. just after
|
|
* start of vblank, which also occurs at start of hsync (on the
|
|
* last active line), the scanline counter will read vblank_start-1.
|
|
*
|
|
* On gen2 the scanline counter starts counting from 1 instead
|
|
* of vtotal-1, so we have to subtract one (or rather add vtotal-1
|
|
* to keep the value positive), instead of adding one.
|
|
*
|
|
* On HSW+ the behaviour of the scanline counter depends on the output
|
|
* type. For DP ports it behaves like most other platforms, but on HDMI
|
|
* there's an extra 1 line difference. So we need to add two instead of
|
|
* one to the value.
|
|
*/
|
|
if (IS_GEN2(dev)) {
|
|
const struct drm_display_mode *adjusted_mode = &crtc->config->base.adjusted_mode;
|
|
int vtotal;
|
|
|
|
vtotal = adjusted_mode->crtc_vtotal;
|
|
if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
|
|
vtotal /= 2;
|
|
|
|
crtc->scanline_offset = vtotal - 1;
|
|
} else if (HAS_DDI(dev) &&
|
|
intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI)) {
|
|
crtc->scanline_offset = 2;
|
|
} else
|
|
crtc->scanline_offset = 1;
|
|
}
|
|
|
|
static void intel_modeset_clear_plls(struct drm_atomic_state *state)
|
|
{
|
|
struct drm_device *dev = state->dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct intel_shared_dpll_config *shared_dpll = NULL;
|
|
struct intel_crtc *intel_crtc;
|
|
struct intel_crtc_state *intel_crtc_state;
|
|
struct drm_crtc *crtc;
|
|
struct drm_crtc_state *crtc_state;
|
|
int i;
|
|
|
|
if (!dev_priv->display.crtc_compute_clock)
|
|
return;
|
|
|
|
for_each_crtc_in_state(state, crtc, crtc_state, i) {
|
|
int dpll;
|
|
|
|
intel_crtc = to_intel_crtc(crtc);
|
|
intel_crtc_state = to_intel_crtc_state(crtc_state);
|
|
dpll = intel_crtc_state->shared_dpll;
|
|
|
|
if (!needs_modeset(crtc_state) || dpll == DPLL_ID_PRIVATE)
|
|
continue;
|
|
|
|
intel_crtc_state->shared_dpll = DPLL_ID_PRIVATE;
|
|
|
|
if (!shared_dpll)
|
|
shared_dpll = intel_atomic_get_shared_dpll_state(state);
|
|
|
|
shared_dpll[dpll].crtc_mask &= ~(1 << intel_crtc->pipe);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* This implements the workaround described in the "notes" section of the mode
|
|
* set sequence documentation. When going from no pipes or single pipe to
|
|
* multiple pipes, and planes are enabled after the pipe, we need to wait at
|
|
* least 2 vblanks on the first pipe before enabling planes on the second pipe.
|
|
*/
|
|
static int haswell_mode_set_planes_workaround(struct drm_atomic_state *state)
|
|
{
|
|
struct drm_crtc_state *crtc_state;
|
|
struct intel_crtc *intel_crtc;
|
|
struct drm_crtc *crtc;
|
|
struct intel_crtc_state *first_crtc_state = NULL;
|
|
struct intel_crtc_state *other_crtc_state = NULL;
|
|
enum pipe first_pipe = INVALID_PIPE, enabled_pipe = INVALID_PIPE;
|
|
int i;
|
|
|
|
/* look at all crtc's that are going to be enabled in during modeset */
|
|
for_each_crtc_in_state(state, crtc, crtc_state, i) {
|
|
intel_crtc = to_intel_crtc(crtc);
|
|
|
|
if (!crtc_state->active || !needs_modeset(crtc_state))
|
|
continue;
|
|
|
|
if (first_crtc_state) {
|
|
other_crtc_state = to_intel_crtc_state(crtc_state);
|
|
break;
|
|
} else {
|
|
first_crtc_state = to_intel_crtc_state(crtc_state);
|
|
first_pipe = intel_crtc->pipe;
|
|
}
|
|
}
|
|
|
|
/* No workaround needed? */
|
|
if (!first_crtc_state)
|
|
return 0;
|
|
|
|
/* w/a possibly needed, check how many crtc's are already enabled. */
|
|
for_each_intel_crtc(state->dev, intel_crtc) {
|
|
struct intel_crtc_state *pipe_config;
|
|
|
|
pipe_config = intel_atomic_get_crtc_state(state, intel_crtc);
|
|
if (IS_ERR(pipe_config))
|
|
return PTR_ERR(pipe_config);
|
|
|
|
pipe_config->hsw_workaround_pipe = INVALID_PIPE;
|
|
|
|
if (!pipe_config->base.active ||
|
|
needs_modeset(&pipe_config->base))
|
|
continue;
|
|
|
|
/* 2 or more enabled crtcs means no need for w/a */
|
|
if (enabled_pipe != INVALID_PIPE)
|
|
return 0;
|
|
|
|
enabled_pipe = intel_crtc->pipe;
|
|
}
|
|
|
|
if (enabled_pipe != INVALID_PIPE)
|
|
first_crtc_state->hsw_workaround_pipe = enabled_pipe;
|
|
else if (other_crtc_state)
|
|
other_crtc_state->hsw_workaround_pipe = first_pipe;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int intel_modeset_all_pipes(struct drm_atomic_state *state)
|
|
{
|
|
struct drm_crtc *crtc;
|
|
struct drm_crtc_state *crtc_state;
|
|
int ret = 0;
|
|
|
|
/* add all active pipes to the state */
|
|
for_each_crtc(state->dev, crtc) {
|
|
crtc_state = drm_atomic_get_crtc_state(state, crtc);
|
|
if (IS_ERR(crtc_state))
|
|
return PTR_ERR(crtc_state);
|
|
|
|
if (!crtc_state->active || needs_modeset(crtc_state))
|
|
continue;
|
|
|
|
crtc_state->mode_changed = true;
|
|
|
|
ret = drm_atomic_add_affected_connectors(state, crtc);
|
|
if (ret)
|
|
break;
|
|
|
|
ret = drm_atomic_add_affected_planes(state, crtc);
|
|
if (ret)
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int intel_modeset_checks(struct drm_atomic_state *state)
|
|
{
|
|
struct drm_device *dev = state->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int ret;
|
|
|
|
if (!check_digital_port_conflicts(state)) {
|
|
DRM_DEBUG_KMS("rejecting conflicting digital port configuration\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* See if the config requires any additional preparation, e.g.
|
|
* to adjust global state with pipes off. We need to do this
|
|
* here so we can get the modeset_pipe updated config for the new
|
|
* mode set on this crtc. For other crtcs we need to use the
|
|
* adjusted_mode bits in the crtc directly.
|
|
*/
|
|
if (dev_priv->display.modeset_calc_cdclk) {
|
|
unsigned int cdclk;
|
|
|
|
ret = dev_priv->display.modeset_calc_cdclk(state);
|
|
|
|
cdclk = to_intel_atomic_state(state)->cdclk;
|
|
if (!ret && cdclk != dev_priv->cdclk_freq)
|
|
ret = intel_modeset_all_pipes(state);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
} else
|
|
to_intel_atomic_state(state)->cdclk = dev_priv->cdclk_freq;
|
|
|
|
intel_modeset_clear_plls(state);
|
|
|
|
if (IS_HASWELL(dev))
|
|
return haswell_mode_set_planes_workaround(state);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Handle calculation of various watermark data at the end of the atomic check
|
|
* phase. The code here should be run after the per-crtc and per-plane 'check'
|
|
* handlers to ensure that all derived state has been updated.
|
|
*/
|
|
static void calc_watermark_data(struct drm_atomic_state *state)
|
|
{
|
|
struct drm_device *dev = state->dev;
|
|
struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
|
|
struct drm_crtc *crtc;
|
|
struct drm_crtc_state *cstate;
|
|
struct drm_plane *plane;
|
|
struct drm_plane_state *pstate;
|
|
|
|
/*
|
|
* Calculate watermark configuration details now that derived
|
|
* plane/crtc state is all properly updated.
|
|
*/
|
|
drm_for_each_crtc(crtc, dev) {
|
|
cstate = drm_atomic_get_existing_crtc_state(state, crtc) ?:
|
|
crtc->state;
|
|
|
|
if (cstate->active)
|
|
intel_state->wm_config.num_pipes_active++;
|
|
}
|
|
drm_for_each_legacy_plane(plane, dev) {
|
|
pstate = drm_atomic_get_existing_plane_state(state, plane) ?:
|
|
plane->state;
|
|
|
|
if (!to_intel_plane_state(pstate)->visible)
|
|
continue;
|
|
|
|
intel_state->wm_config.sprites_enabled = true;
|
|
if (pstate->crtc_w != pstate->src_w >> 16 ||
|
|
pstate->crtc_h != pstate->src_h >> 16)
|
|
intel_state->wm_config.sprites_scaled = true;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* intel_atomic_check - validate state object
|
|
* @dev: drm device
|
|
* @state: state to validate
|
|
*/
|
|
static int intel_atomic_check(struct drm_device *dev,
|
|
struct drm_atomic_state *state)
|
|
{
|
|
struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
|
|
struct drm_crtc *crtc;
|
|
struct drm_crtc_state *crtc_state;
|
|
int ret, i;
|
|
bool any_ms = false;
|
|
|
|
ret = drm_atomic_helper_check_modeset(dev, state);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for_each_crtc_in_state(state, crtc, crtc_state, i) {
|
|
struct intel_crtc_state *pipe_config =
|
|
to_intel_crtc_state(crtc_state);
|
|
|
|
/* Catch I915_MODE_FLAG_INHERITED */
|
|
if (crtc_state->mode.private_flags != crtc->state->mode.private_flags)
|
|
crtc_state->mode_changed = true;
|
|
|
|
if (!crtc_state->enable) {
|
|
if (needs_modeset(crtc_state))
|
|
any_ms = true;
|
|
continue;
|
|
}
|
|
|
|
if (!needs_modeset(crtc_state))
|
|
continue;
|
|
|
|
/* FIXME: For only active_changed we shouldn't need to do any
|
|
* state recomputation at all. */
|
|
|
|
ret = drm_atomic_add_affected_connectors(state, crtc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = intel_modeset_pipe_config(crtc, pipe_config);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (intel_pipe_config_compare(state->dev,
|
|
to_intel_crtc_state(crtc->state),
|
|
pipe_config, true)) {
|
|
crtc_state->mode_changed = false;
|
|
to_intel_crtc_state(crtc_state)->update_pipe = true;
|
|
}
|
|
|
|
if (needs_modeset(crtc_state)) {
|
|
any_ms = true;
|
|
|
|
ret = drm_atomic_add_affected_planes(state, crtc);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config,
|
|
needs_modeset(crtc_state) ?
|
|
"[modeset]" : "[fastset]");
|
|
}
|
|
|
|
if (any_ms) {
|
|
ret = intel_modeset_checks(state);
|
|
|
|
if (ret)
|
|
return ret;
|
|
} else
|
|
intel_state->cdclk = to_i915(state->dev)->cdclk_freq;
|
|
|
|
ret = drm_atomic_helper_check_planes(state->dev, state);
|
|
if (ret)
|
|
return ret;
|
|
|
|
calc_watermark_data(state);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int intel_atomic_prepare_commit(struct drm_device *dev,
|
|
struct drm_atomic_state *state,
|
|
bool async)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_plane_state *plane_state;
|
|
struct drm_crtc_state *crtc_state;
|
|
struct drm_plane *plane;
|
|
struct drm_crtc *crtc;
|
|
int i, ret;
|
|
|
|
if (async) {
|
|
DRM_DEBUG_KMS("i915 does not yet support async commit\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
for_each_crtc_in_state(state, crtc, crtc_state, i) {
|
|
ret = intel_crtc_wait_for_pending_flips(crtc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (atomic_read(&to_intel_crtc(crtc)->unpin_work_count) >= 2)
|
|
flush_workqueue(dev_priv->wq);
|
|
}
|
|
|
|
ret = mutex_lock_interruptible(&dev->struct_mutex);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = drm_atomic_helper_prepare_planes(dev, state);
|
|
if (!ret && !async && !i915_reset_in_progress(&dev_priv->gpu_error)) {
|
|
u32 reset_counter;
|
|
|
|
reset_counter = atomic_read(&dev_priv->gpu_error.reset_counter);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
for_each_plane_in_state(state, plane, plane_state, i) {
|
|
struct intel_plane_state *intel_plane_state =
|
|
to_intel_plane_state(plane_state);
|
|
|
|
if (!intel_plane_state->wait_req)
|
|
continue;
|
|
|
|
ret = __i915_wait_request(intel_plane_state->wait_req,
|
|
reset_counter, true,
|
|
NULL, NULL);
|
|
|
|
/* Swallow -EIO errors to allow updates during hw lockup. */
|
|
if (ret == -EIO)
|
|
ret = 0;
|
|
|
|
if (ret)
|
|
break;
|
|
}
|
|
|
|
if (!ret)
|
|
return 0;
|
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
drm_atomic_helper_cleanup_planes(dev, state);
|
|
}
|
|
|
|
mutex_unlock(&dev->struct_mutex);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* intel_atomic_commit - commit validated state object
|
|
* @dev: DRM device
|
|
* @state: the top-level driver state object
|
|
* @async: asynchronous commit
|
|
*
|
|
* This function commits a top-level state object that has been validated
|
|
* with drm_atomic_helper_check().
|
|
*
|
|
* FIXME: Atomic modeset support for i915 is not yet complete. At the moment
|
|
* we can only handle plane-related operations and do not yet support
|
|
* asynchronous commit.
|
|
*
|
|
* RETURNS
|
|
* Zero for success or -errno.
|
|
*/
|
|
static int intel_atomic_commit(struct drm_device *dev,
|
|
struct drm_atomic_state *state,
|
|
bool async)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_crtc_state *crtc_state;
|
|
struct drm_crtc *crtc;
|
|
int ret = 0;
|
|
int i;
|
|
bool any_ms = false;
|
|
|
|
ret = intel_atomic_prepare_commit(dev, state, async);
|
|
if (ret) {
|
|
DRM_DEBUG_ATOMIC("Preparing state failed with %i\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
drm_atomic_helper_swap_state(dev, state);
|
|
dev_priv->wm.config = to_intel_atomic_state(state)->wm_config;
|
|
|
|
for_each_crtc_in_state(state, crtc, crtc_state, i) {
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
|
|
if (!needs_modeset(crtc->state))
|
|
continue;
|
|
|
|
any_ms = true;
|
|
intel_pre_plane_update(intel_crtc);
|
|
|
|
if (crtc_state->active) {
|
|
intel_crtc_disable_planes(crtc, crtc_state->plane_mask);
|
|
dev_priv->display.crtc_disable(crtc);
|
|
intel_crtc->active = false;
|
|
intel_disable_shared_dpll(intel_crtc);
|
|
}
|
|
}
|
|
|
|
/* Only after disabling all output pipelines that will be changed can we
|
|
* update the the output configuration. */
|
|
intel_modeset_update_crtc_state(state);
|
|
|
|
if (any_ms) {
|
|
intel_shared_dpll_commit(state);
|
|
|
|
drm_atomic_helper_update_legacy_modeset_state(state->dev, state);
|
|
modeset_update_crtc_power_domains(state);
|
|
}
|
|
|
|
/* Now enable the clocks, plane, pipe, and connectors that we set up. */
|
|
for_each_crtc_in_state(state, crtc, crtc_state, i) {
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
bool modeset = needs_modeset(crtc->state);
|
|
bool update_pipe = !modeset &&
|
|
to_intel_crtc_state(crtc->state)->update_pipe;
|
|
unsigned long put_domains = 0;
|
|
|
|
if (modeset)
|
|
intel_display_power_get(dev_priv, POWER_DOMAIN_MODESET);
|
|
|
|
if (modeset && crtc->state->active) {
|
|
update_scanline_offset(to_intel_crtc(crtc));
|
|
dev_priv->display.crtc_enable(crtc);
|
|
}
|
|
|
|
if (update_pipe) {
|
|
put_domains = modeset_get_crtc_power_domains(crtc);
|
|
|
|
/* make sure intel_modeset_check_state runs */
|
|
any_ms = true;
|
|
}
|
|
|
|
if (!modeset)
|
|
intel_pre_plane_update(intel_crtc);
|
|
|
|
if (crtc->state->active &&
|
|
(crtc->state->planes_changed || update_pipe))
|
|
drm_atomic_helper_commit_planes_on_crtc(crtc_state);
|
|
|
|
if (put_domains)
|
|
modeset_put_power_domains(dev_priv, put_domains);
|
|
|
|
intel_post_plane_update(intel_crtc);
|
|
|
|
if (modeset)
|
|
intel_display_power_put(dev_priv, POWER_DOMAIN_MODESET);
|
|
}
|
|
|
|
/* FIXME: add subpixel order */
|
|
|
|
drm_atomic_helper_wait_for_vblanks(dev, state);
|
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
drm_atomic_helper_cleanup_planes(dev, state);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
if (any_ms)
|
|
intel_modeset_check_state(dev, state);
|
|
|
|
drm_atomic_state_free(state);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void intel_crtc_restore_mode(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_atomic_state *state;
|
|
struct drm_crtc_state *crtc_state;
|
|
int ret;
|
|
|
|
state = drm_atomic_state_alloc(dev);
|
|
if (!state) {
|
|
DRM_DEBUG_KMS("[CRTC:%d] crtc restore failed, out of memory",
|
|
crtc->base.id);
|
|
return;
|
|
}
|
|
|
|
state->acquire_ctx = drm_modeset_legacy_acquire_ctx(crtc);
|
|
|
|
retry:
|
|
crtc_state = drm_atomic_get_crtc_state(state, crtc);
|
|
ret = PTR_ERR_OR_ZERO(crtc_state);
|
|
if (!ret) {
|
|
if (!crtc_state->active)
|
|
goto out;
|
|
|
|
crtc_state->mode_changed = true;
|
|
ret = drm_atomic_commit(state);
|
|
}
|
|
|
|
if (ret == -EDEADLK) {
|
|
drm_atomic_state_clear(state);
|
|
drm_modeset_backoff(state->acquire_ctx);
|
|
goto retry;
|
|
}
|
|
|
|
if (ret)
|
|
out:
|
|
drm_atomic_state_free(state);
|
|
}
|
|
|
|
#undef for_each_intel_crtc_masked
|
|
|
|
static const struct drm_crtc_funcs intel_crtc_funcs = {
|
|
.gamma_set = intel_crtc_gamma_set,
|
|
.set_config = drm_atomic_helper_set_config,
|
|
.destroy = intel_crtc_destroy,
|
|
.page_flip = intel_crtc_page_flip,
|
|
.atomic_duplicate_state = intel_crtc_duplicate_state,
|
|
.atomic_destroy_state = intel_crtc_destroy_state,
|
|
};
|
|
|
|
static bool ibx_pch_dpll_get_hw_state(struct drm_i915_private *dev_priv,
|
|
struct intel_shared_dpll *pll,
|
|
struct intel_dpll_hw_state *hw_state)
|
|
{
|
|
uint32_t val;
|
|
|
|
if (!intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_PLLS))
|
|
return false;
|
|
|
|
val = I915_READ(PCH_DPLL(pll->id));
|
|
hw_state->dpll = val;
|
|
hw_state->fp0 = I915_READ(PCH_FP0(pll->id));
|
|
hw_state->fp1 = I915_READ(PCH_FP1(pll->id));
|
|
|
|
return val & DPLL_VCO_ENABLE;
|
|
}
|
|
|
|
static void ibx_pch_dpll_mode_set(struct drm_i915_private *dev_priv,
|
|
struct intel_shared_dpll *pll)
|
|
{
|
|
I915_WRITE(PCH_FP0(pll->id), pll->config.hw_state.fp0);
|
|
I915_WRITE(PCH_FP1(pll->id), pll->config.hw_state.fp1);
|
|
}
|
|
|
|
static void ibx_pch_dpll_enable(struct drm_i915_private *dev_priv,
|
|
struct intel_shared_dpll *pll)
|
|
{
|
|
/* PCH refclock must be enabled first */
|
|
ibx_assert_pch_refclk_enabled(dev_priv);
|
|
|
|
I915_WRITE(PCH_DPLL(pll->id), pll->config.hw_state.dpll);
|
|
|
|
/* Wait for the clocks to stabilize. */
|
|
POSTING_READ(PCH_DPLL(pll->id));
|
|
udelay(150);
|
|
|
|
/* The pixel multiplier can only be updated once the
|
|
* DPLL is enabled and the clocks are stable.
|
|
*
|
|
* So write it again.
|
|
*/
|
|
I915_WRITE(PCH_DPLL(pll->id), pll->config.hw_state.dpll);
|
|
POSTING_READ(PCH_DPLL(pll->id));
|
|
udelay(200);
|
|
}
|
|
|
|
static void ibx_pch_dpll_disable(struct drm_i915_private *dev_priv,
|
|
struct intel_shared_dpll *pll)
|
|
{
|
|
struct drm_device *dev = dev_priv->dev;
|
|
struct intel_crtc *crtc;
|
|
|
|
/* Make sure no transcoder isn't still depending on us. */
|
|
for_each_intel_crtc(dev, crtc) {
|
|
if (intel_crtc_to_shared_dpll(crtc) == pll)
|
|
assert_pch_transcoder_disabled(dev_priv, crtc->pipe);
|
|
}
|
|
|
|
I915_WRITE(PCH_DPLL(pll->id), 0);
|
|
POSTING_READ(PCH_DPLL(pll->id));
|
|
udelay(200);
|
|
}
|
|
|
|
static char *ibx_pch_dpll_names[] = {
|
|
"PCH DPLL A",
|
|
"PCH DPLL B",
|
|
};
|
|
|
|
static void ibx_pch_dpll_init(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int i;
|
|
|
|
dev_priv->num_shared_dpll = 2;
|
|
|
|
for (i = 0; i < dev_priv->num_shared_dpll; i++) {
|
|
dev_priv->shared_dplls[i].id = i;
|
|
dev_priv->shared_dplls[i].name = ibx_pch_dpll_names[i];
|
|
dev_priv->shared_dplls[i].mode_set = ibx_pch_dpll_mode_set;
|
|
dev_priv->shared_dplls[i].enable = ibx_pch_dpll_enable;
|
|
dev_priv->shared_dplls[i].disable = ibx_pch_dpll_disable;
|
|
dev_priv->shared_dplls[i].get_hw_state =
|
|
ibx_pch_dpll_get_hw_state;
|
|
}
|
|
}
|
|
|
|
static void intel_shared_dpll_init(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (HAS_DDI(dev))
|
|
intel_ddi_pll_init(dev);
|
|
else if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
|
|
ibx_pch_dpll_init(dev);
|
|
else
|
|
dev_priv->num_shared_dpll = 0;
|
|
|
|
BUG_ON(dev_priv->num_shared_dpll > I915_NUM_PLLS);
|
|
}
|
|
|
|
/**
|
|
* intel_prepare_plane_fb - Prepare fb for usage on plane
|
|
* @plane: drm plane to prepare for
|
|
* @fb: framebuffer to prepare for presentation
|
|
*
|
|
* Prepares a framebuffer for usage on a display plane. Generally this
|
|
* involves pinning the underlying object and updating the frontbuffer tracking
|
|
* bits. Some older platforms need special physical address handling for
|
|
* cursor planes.
|
|
*
|
|
* Must be called with struct_mutex held.
|
|
*
|
|
* Returns 0 on success, negative error code on failure.
|
|
*/
|
|
int
|
|
intel_prepare_plane_fb(struct drm_plane *plane,
|
|
const struct drm_plane_state *new_state)
|
|
{
|
|
struct drm_device *dev = plane->dev;
|
|
struct drm_framebuffer *fb = new_state->fb;
|
|
struct intel_plane *intel_plane = to_intel_plane(plane);
|
|
struct drm_i915_gem_object *obj = intel_fb_obj(fb);
|
|
struct drm_i915_gem_object *old_obj = intel_fb_obj(plane->state->fb);
|
|
int ret = 0;
|
|
|
|
if (!obj && !old_obj)
|
|
return 0;
|
|
|
|
if (old_obj) {
|
|
struct drm_crtc_state *crtc_state =
|
|
drm_atomic_get_existing_crtc_state(new_state->state, plane->state->crtc);
|
|
|
|
/* Big Hammer, we also need to ensure that any pending
|
|
* MI_WAIT_FOR_EVENT inside a user batch buffer on the
|
|
* current scanout is retired before unpinning the old
|
|
* framebuffer. Note that we rely on userspace rendering
|
|
* into the buffer attached to the pipe they are waiting
|
|
* on. If not, userspace generates a GPU hang with IPEHR
|
|
* point to the MI_WAIT_FOR_EVENT.
|
|
*
|
|
* This should only fail upon a hung GPU, in which case we
|
|
* can safely continue.
|
|
*/
|
|
if (needs_modeset(crtc_state))
|
|
ret = i915_gem_object_wait_rendering(old_obj, true);
|
|
|
|
/* Swallow -EIO errors to allow updates during hw lockup. */
|
|
if (ret && ret != -EIO)
|
|
return ret;
|
|
}
|
|
|
|
if (!obj) {
|
|
ret = 0;
|
|
} else if (plane->type == DRM_PLANE_TYPE_CURSOR &&
|
|
INTEL_INFO(dev)->cursor_needs_physical) {
|
|
int align = IS_I830(dev) ? 16 * 1024 : 256;
|
|
ret = i915_gem_object_attach_phys(obj, align);
|
|
if (ret)
|
|
DRM_DEBUG_KMS("failed to attach phys object\n");
|
|
} else {
|
|
ret = intel_pin_and_fence_fb_obj(plane, fb, new_state);
|
|
}
|
|
|
|
if (ret == 0) {
|
|
if (obj) {
|
|
struct intel_plane_state *plane_state =
|
|
to_intel_plane_state(new_state);
|
|
|
|
i915_gem_request_assign(&plane_state->wait_req,
|
|
obj->last_write_req);
|
|
}
|
|
|
|
i915_gem_track_fb(old_obj, obj, intel_plane->frontbuffer_bit);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* intel_cleanup_plane_fb - Cleans up an fb after plane use
|
|
* @plane: drm plane to clean up for
|
|
* @fb: old framebuffer that was on plane
|
|
*
|
|
* Cleans up a framebuffer that has just been removed from a plane.
|
|
*
|
|
* Must be called with struct_mutex held.
|
|
*/
|
|
void
|
|
intel_cleanup_plane_fb(struct drm_plane *plane,
|
|
const struct drm_plane_state *old_state)
|
|
{
|
|
struct drm_device *dev = plane->dev;
|
|
struct intel_plane *intel_plane = to_intel_plane(plane);
|
|
struct intel_plane_state *old_intel_state;
|
|
struct drm_i915_gem_object *old_obj = intel_fb_obj(old_state->fb);
|
|
struct drm_i915_gem_object *obj = intel_fb_obj(plane->state->fb);
|
|
|
|
old_intel_state = to_intel_plane_state(old_state);
|
|
|
|
if (!obj && !old_obj)
|
|
return;
|
|
|
|
if (old_obj && (plane->type != DRM_PLANE_TYPE_CURSOR ||
|
|
!INTEL_INFO(dev)->cursor_needs_physical))
|
|
intel_unpin_fb_obj(old_state->fb, old_state);
|
|
|
|
/* prepare_fb aborted? */
|
|
if ((old_obj && (old_obj->frontbuffer_bits & intel_plane->frontbuffer_bit)) ||
|
|
(obj && !(obj->frontbuffer_bits & intel_plane->frontbuffer_bit)))
|
|
i915_gem_track_fb(old_obj, obj, intel_plane->frontbuffer_bit);
|
|
|
|
i915_gem_request_assign(&old_intel_state->wait_req, NULL);
|
|
|
|
}
|
|
|
|
int
|
|
skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state)
|
|
{
|
|
int max_scale;
|
|
struct drm_device *dev;
|
|
struct drm_i915_private *dev_priv;
|
|
int crtc_clock, cdclk;
|
|
|
|
if (!intel_crtc || !crtc_state)
|
|
return DRM_PLANE_HELPER_NO_SCALING;
|
|
|
|
dev = intel_crtc->base.dev;
|
|
dev_priv = dev->dev_private;
|
|
crtc_clock = crtc_state->base.adjusted_mode.crtc_clock;
|
|
cdclk = to_intel_atomic_state(crtc_state->base.state)->cdclk;
|
|
|
|
if (WARN_ON_ONCE(!crtc_clock || cdclk < crtc_clock))
|
|
return DRM_PLANE_HELPER_NO_SCALING;
|
|
|
|
/*
|
|
* skl max scale is lower of:
|
|
* close to 3 but not 3, -1 is for that purpose
|
|
* or
|
|
* cdclk/crtc_clock
|
|
*/
|
|
max_scale = min((1 << 16) * 3 - 1, (1 << 8) * ((cdclk << 8) / crtc_clock));
|
|
|
|
return max_scale;
|
|
}
|
|
|
|
static int
|
|
intel_check_primary_plane(struct drm_plane *plane,
|
|
struct intel_crtc_state *crtc_state,
|
|
struct intel_plane_state *state)
|
|
{
|
|
struct drm_crtc *crtc = state->base.crtc;
|
|
struct drm_framebuffer *fb = state->base.fb;
|
|
int min_scale = DRM_PLANE_HELPER_NO_SCALING;
|
|
int max_scale = DRM_PLANE_HELPER_NO_SCALING;
|
|
bool can_position = false;
|
|
|
|
/* use scaler when colorkey is not required */
|
|
if (INTEL_INFO(plane->dev)->gen >= 9 &&
|
|
state->ckey.flags == I915_SET_COLORKEY_NONE) {
|
|
min_scale = 1;
|
|
max_scale = skl_max_scale(to_intel_crtc(crtc), crtc_state);
|
|
can_position = true;
|
|
}
|
|
|
|
return drm_plane_helper_check_update(plane, crtc, fb, &state->src,
|
|
&state->dst, &state->clip,
|
|
min_scale, max_scale,
|
|
can_position, true,
|
|
&state->visible);
|
|
}
|
|
|
|
static void
|
|
intel_commit_primary_plane(struct drm_plane *plane,
|
|
struct intel_plane_state *state)
|
|
{
|
|
struct drm_crtc *crtc = state->base.crtc;
|
|
struct drm_framebuffer *fb = state->base.fb;
|
|
struct drm_device *dev = plane->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
crtc = crtc ? crtc : plane->crtc;
|
|
|
|
dev_priv->display.update_primary_plane(crtc, fb,
|
|
state->src.x1 >> 16,
|
|
state->src.y1 >> 16);
|
|
}
|
|
|
|
static void
|
|
intel_disable_primary_plane(struct drm_plane *plane,
|
|
struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = plane->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
dev_priv->display.update_primary_plane(crtc, NULL, 0, 0);
|
|
}
|
|
|
|
static void intel_begin_crtc_commit(struct drm_crtc *crtc,
|
|
struct drm_crtc_state *old_crtc_state)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct intel_crtc_state *old_intel_state =
|
|
to_intel_crtc_state(old_crtc_state);
|
|
bool modeset = needs_modeset(crtc->state);
|
|
|
|
if (intel_crtc->atomic.update_wm_pre)
|
|
intel_update_watermarks(crtc);
|
|
|
|
/* Perform vblank evasion around commit operation */
|
|
intel_pipe_update_start(intel_crtc);
|
|
|
|
if (modeset)
|
|
return;
|
|
|
|
if (to_intel_crtc_state(crtc->state)->update_pipe)
|
|
intel_update_pipe_config(intel_crtc, old_intel_state);
|
|
else if (INTEL_INFO(dev)->gen >= 9)
|
|
skl_detach_scalers(intel_crtc);
|
|
}
|
|
|
|
static void intel_finish_crtc_commit(struct drm_crtc *crtc,
|
|
struct drm_crtc_state *old_crtc_state)
|
|
{
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
|
|
intel_pipe_update_end(intel_crtc);
|
|
}
|
|
|
|
/**
|
|
* intel_plane_destroy - destroy a plane
|
|
* @plane: plane to destroy
|
|
*
|
|
* Common destruction function for all types of planes (primary, cursor,
|
|
* sprite).
|
|
*/
|
|
void intel_plane_destroy(struct drm_plane *plane)
|
|
{
|
|
struct intel_plane *intel_plane = to_intel_plane(plane);
|
|
drm_plane_cleanup(plane);
|
|
kfree(intel_plane);
|
|
}
|
|
|
|
const struct drm_plane_funcs intel_plane_funcs = {
|
|
.update_plane = drm_atomic_helper_update_plane,
|
|
.disable_plane = drm_atomic_helper_disable_plane,
|
|
.destroy = intel_plane_destroy,
|
|
.set_property = drm_atomic_helper_plane_set_property,
|
|
.atomic_get_property = intel_plane_atomic_get_property,
|
|
.atomic_set_property = intel_plane_atomic_set_property,
|
|
.atomic_duplicate_state = intel_plane_duplicate_state,
|
|
.atomic_destroy_state = intel_plane_destroy_state,
|
|
|
|
};
|
|
|
|
static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
|
|
int pipe)
|
|
{
|
|
struct intel_plane *primary;
|
|
struct intel_plane_state *state;
|
|
const uint32_t *intel_primary_formats;
|
|
unsigned int num_formats;
|
|
|
|
primary = kzalloc(sizeof(*primary), GFP_KERNEL);
|
|
if (primary == NULL)
|
|
return NULL;
|
|
|
|
state = intel_create_plane_state(&primary->base);
|
|
if (!state) {
|
|
kfree(primary);
|
|
return NULL;
|
|
}
|
|
primary->base.state = &state->base;
|
|
|
|
primary->can_scale = false;
|
|
primary->max_downscale = 1;
|
|
if (INTEL_INFO(dev)->gen >= 9) {
|
|
primary->can_scale = true;
|
|
state->scaler_id = -1;
|
|
}
|
|
primary->pipe = pipe;
|
|
primary->plane = pipe;
|
|
primary->frontbuffer_bit = INTEL_FRONTBUFFER_PRIMARY(pipe);
|
|
primary->check_plane = intel_check_primary_plane;
|
|
primary->commit_plane = intel_commit_primary_plane;
|
|
primary->disable_plane = intel_disable_primary_plane;
|
|
if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4)
|
|
primary->plane = !pipe;
|
|
|
|
if (INTEL_INFO(dev)->gen >= 9) {
|
|
intel_primary_formats = skl_primary_formats;
|
|
num_formats = ARRAY_SIZE(skl_primary_formats);
|
|
} else if (INTEL_INFO(dev)->gen >= 4) {
|
|
intel_primary_formats = i965_primary_formats;
|
|
num_formats = ARRAY_SIZE(i965_primary_formats);
|
|
} else {
|
|
intel_primary_formats = i8xx_primary_formats;
|
|
num_formats = ARRAY_SIZE(i8xx_primary_formats);
|
|
}
|
|
|
|
drm_universal_plane_init(dev, &primary->base, 0,
|
|
&intel_plane_funcs,
|
|
intel_primary_formats, num_formats,
|
|
DRM_PLANE_TYPE_PRIMARY);
|
|
|
|
if (INTEL_INFO(dev)->gen >= 4)
|
|
intel_create_rotation_property(dev, primary);
|
|
|
|
drm_plane_helper_add(&primary->base, &intel_plane_helper_funcs);
|
|
|
|
return &primary->base;
|
|
}
|
|
|
|
void intel_create_rotation_property(struct drm_device *dev, struct intel_plane *plane)
|
|
{
|
|
if (!dev->mode_config.rotation_property) {
|
|
unsigned long flags = BIT(DRM_ROTATE_0) |
|
|
BIT(DRM_ROTATE_180);
|
|
|
|
if (INTEL_INFO(dev)->gen >= 9)
|
|
flags |= BIT(DRM_ROTATE_90) | BIT(DRM_ROTATE_270);
|
|
|
|
dev->mode_config.rotation_property =
|
|
drm_mode_create_rotation_property(dev, flags);
|
|
}
|
|
if (dev->mode_config.rotation_property)
|
|
drm_object_attach_property(&plane->base.base,
|
|
dev->mode_config.rotation_property,
|
|
plane->base.state->rotation);
|
|
}
|
|
|
|
static int
|
|
intel_check_cursor_plane(struct drm_plane *plane,
|
|
struct intel_crtc_state *crtc_state,
|
|
struct intel_plane_state *state)
|
|
{
|
|
struct drm_crtc *crtc = crtc_state->base.crtc;
|
|
struct drm_framebuffer *fb = state->base.fb;
|
|
struct drm_i915_gem_object *obj = intel_fb_obj(fb);
|
|
unsigned stride;
|
|
int ret;
|
|
|
|
ret = drm_plane_helper_check_update(plane, crtc, fb, &state->src,
|
|
&state->dst, &state->clip,
|
|
DRM_PLANE_HELPER_NO_SCALING,
|
|
DRM_PLANE_HELPER_NO_SCALING,
|
|
true, true, &state->visible);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* if we want to turn off the cursor ignore width and height */
|
|
if (!obj)
|
|
return 0;
|
|
|
|
/* Check for which cursor types we support */
|
|
if (!cursor_size_ok(plane->dev, state->base.crtc_w, state->base.crtc_h)) {
|
|
DRM_DEBUG("Cursor dimension %dx%d not supported\n",
|
|
state->base.crtc_w, state->base.crtc_h);
|
|
return -EINVAL;
|
|
}
|
|
|
|
stride = roundup_pow_of_two(state->base.crtc_w) * 4;
|
|
if (obj->base.size < stride * state->base.crtc_h) {
|
|
DRM_DEBUG_KMS("buffer is too small\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (fb->modifier[0] != DRM_FORMAT_MOD_NONE) {
|
|
DRM_DEBUG_KMS("cursor cannot be tiled\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
intel_disable_cursor_plane(struct drm_plane *plane,
|
|
struct drm_crtc *crtc)
|
|
{
|
|
intel_crtc_update_cursor(crtc, false);
|
|
}
|
|
|
|
static void
|
|
intel_commit_cursor_plane(struct drm_plane *plane,
|
|
struct intel_plane_state *state)
|
|
{
|
|
struct drm_crtc *crtc = state->base.crtc;
|
|
struct drm_device *dev = plane->dev;
|
|
struct intel_crtc *intel_crtc;
|
|
struct drm_i915_gem_object *obj = intel_fb_obj(state->base.fb);
|
|
uint32_t addr;
|
|
|
|
crtc = crtc ? crtc : plane->crtc;
|
|
intel_crtc = to_intel_crtc(crtc);
|
|
|
|
if (intel_crtc->cursor_bo == obj)
|
|
goto update;
|
|
|
|
if (!obj)
|
|
addr = 0;
|
|
else if (!INTEL_INFO(dev)->cursor_needs_physical)
|
|
addr = i915_gem_obj_ggtt_offset(obj);
|
|
else
|
|
addr = obj->phys_handle->busaddr;
|
|
|
|
intel_crtc->cursor_addr = addr;
|
|
intel_crtc->cursor_bo = obj;
|
|
|
|
update:
|
|
intel_crtc_update_cursor(crtc, state->visible);
|
|
}
|
|
|
|
static struct drm_plane *intel_cursor_plane_create(struct drm_device *dev,
|
|
int pipe)
|
|
{
|
|
struct intel_plane *cursor;
|
|
struct intel_plane_state *state;
|
|
|
|
cursor = kzalloc(sizeof(*cursor), GFP_KERNEL);
|
|
if (cursor == NULL)
|
|
return NULL;
|
|
|
|
state = intel_create_plane_state(&cursor->base);
|
|
if (!state) {
|
|
kfree(cursor);
|
|
return NULL;
|
|
}
|
|
cursor->base.state = &state->base;
|
|
|
|
cursor->can_scale = false;
|
|
cursor->max_downscale = 1;
|
|
cursor->pipe = pipe;
|
|
cursor->plane = pipe;
|
|
cursor->frontbuffer_bit = INTEL_FRONTBUFFER_CURSOR(pipe);
|
|
cursor->check_plane = intel_check_cursor_plane;
|
|
cursor->commit_plane = intel_commit_cursor_plane;
|
|
cursor->disable_plane = intel_disable_cursor_plane;
|
|
|
|
drm_universal_plane_init(dev, &cursor->base, 0,
|
|
&intel_plane_funcs,
|
|
intel_cursor_formats,
|
|
ARRAY_SIZE(intel_cursor_formats),
|
|
DRM_PLANE_TYPE_CURSOR);
|
|
|
|
if (INTEL_INFO(dev)->gen >= 4) {
|
|
if (!dev->mode_config.rotation_property)
|
|
dev->mode_config.rotation_property =
|
|
drm_mode_create_rotation_property(dev,
|
|
BIT(DRM_ROTATE_0) |
|
|
BIT(DRM_ROTATE_180));
|
|
if (dev->mode_config.rotation_property)
|
|
drm_object_attach_property(&cursor->base.base,
|
|
dev->mode_config.rotation_property,
|
|
state->base.rotation);
|
|
}
|
|
|
|
if (INTEL_INFO(dev)->gen >=9)
|
|
state->scaler_id = -1;
|
|
|
|
drm_plane_helper_add(&cursor->base, &intel_plane_helper_funcs);
|
|
|
|
return &cursor->base;
|
|
}
|
|
|
|
static void skl_init_scalers(struct drm_device *dev, struct intel_crtc *intel_crtc,
|
|
struct intel_crtc_state *crtc_state)
|
|
{
|
|
int i;
|
|
struct intel_scaler *intel_scaler;
|
|
struct intel_crtc_scaler_state *scaler_state = &crtc_state->scaler_state;
|
|
|
|
for (i = 0; i < intel_crtc->num_scalers; i++) {
|
|
intel_scaler = &scaler_state->scalers[i];
|
|
intel_scaler->in_use = 0;
|
|
intel_scaler->mode = PS_SCALER_MODE_DYN;
|
|
}
|
|
|
|
scaler_state->scaler_id = -1;
|
|
}
|
|
|
|
static void intel_crtc_init(struct drm_device *dev, int pipe)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc;
|
|
struct intel_crtc_state *crtc_state = NULL;
|
|
struct drm_plane *primary = NULL;
|
|
struct drm_plane *cursor = NULL;
|
|
int i, ret;
|
|
|
|
intel_crtc = kzalloc(sizeof(*intel_crtc), GFP_KERNEL);
|
|
if (intel_crtc == NULL)
|
|
return;
|
|
|
|
crtc_state = kzalloc(sizeof(*crtc_state), GFP_KERNEL);
|
|
if (!crtc_state)
|
|
goto fail;
|
|
intel_crtc->config = crtc_state;
|
|
intel_crtc->base.state = &crtc_state->base;
|
|
crtc_state->base.crtc = &intel_crtc->base;
|
|
|
|
/* initialize shared scalers */
|
|
if (INTEL_INFO(dev)->gen >= 9) {
|
|
if (pipe == PIPE_C)
|
|
intel_crtc->num_scalers = 1;
|
|
else
|
|
intel_crtc->num_scalers = SKL_NUM_SCALERS;
|
|
|
|
skl_init_scalers(dev, intel_crtc, crtc_state);
|
|
}
|
|
|
|
primary = intel_primary_plane_create(dev, pipe);
|
|
if (!primary)
|
|
goto fail;
|
|
|
|
cursor = intel_cursor_plane_create(dev, pipe);
|
|
if (!cursor)
|
|
goto fail;
|
|
|
|
ret = drm_crtc_init_with_planes(dev, &intel_crtc->base, primary,
|
|
cursor, &intel_crtc_funcs);
|
|
if (ret)
|
|
goto fail;
|
|
|
|
drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
|
|
for (i = 0; i < 256; i++) {
|
|
intel_crtc->lut_r[i] = i;
|
|
intel_crtc->lut_g[i] = i;
|
|
intel_crtc->lut_b[i] = i;
|
|
}
|
|
|
|
/*
|
|
* On gen2/3 only plane A can do fbc, but the panel fitter and lvds port
|
|
* is hooked to pipe B. Hence we want plane A feeding pipe B.
|
|
*/
|
|
intel_crtc->pipe = pipe;
|
|
intel_crtc->plane = pipe;
|
|
if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4) {
|
|
DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
|
|
intel_crtc->plane = !pipe;
|
|
}
|
|
|
|
intel_crtc->cursor_base = ~0;
|
|
intel_crtc->cursor_cntl = ~0;
|
|
intel_crtc->cursor_size = ~0;
|
|
|
|
intel_crtc->wm.cxsr_allowed = true;
|
|
|
|
BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
|
|
dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL);
|
|
dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
|
|
dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
|
|
|
|
drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
|
|
|
|
WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe);
|
|
return;
|
|
|
|
fail:
|
|
if (primary)
|
|
drm_plane_cleanup(primary);
|
|
if (cursor)
|
|
drm_plane_cleanup(cursor);
|
|
kfree(crtc_state);
|
|
kfree(intel_crtc);
|
|
}
|
|
|
|
enum pipe intel_get_pipe_from_connector(struct intel_connector *connector)
|
|
{
|
|
struct drm_encoder *encoder = connector->base.encoder;
|
|
struct drm_device *dev = connector->base.dev;
|
|
|
|
WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
|
|
|
|
if (!encoder || WARN_ON(!encoder->crtc))
|
|
return INVALID_PIPE;
|
|
|
|
return to_intel_crtc(encoder->crtc)->pipe;
|
|
}
|
|
|
|
int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
|
|
struct drm_file *file)
|
|
{
|
|
struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
|
|
struct drm_crtc *drmmode_crtc;
|
|
struct intel_crtc *crtc;
|
|
|
|
drmmode_crtc = drm_crtc_find(dev, pipe_from_crtc_id->crtc_id);
|
|
|
|
if (!drmmode_crtc) {
|
|
DRM_ERROR("no such CRTC id\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
crtc = to_intel_crtc(drmmode_crtc);
|
|
pipe_from_crtc_id->pipe = crtc->pipe;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int intel_encoder_clones(struct intel_encoder *encoder)
|
|
{
|
|
struct drm_device *dev = encoder->base.dev;
|
|
struct intel_encoder *source_encoder;
|
|
int index_mask = 0;
|
|
int entry = 0;
|
|
|
|
for_each_intel_encoder(dev, source_encoder) {
|
|
if (encoders_cloneable(encoder, source_encoder))
|
|
index_mask |= (1 << entry);
|
|
|
|
entry++;
|
|
}
|
|
|
|
return index_mask;
|
|
}
|
|
|
|
static bool has_edp_a(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (!IS_MOBILE(dev))
|
|
return false;
|
|
|
|
if ((I915_READ(DP_A) & DP_DETECTED) == 0)
|
|
return false;
|
|
|
|
if (IS_GEN5(dev) && (I915_READ(FUSE_STRAP) & ILK_eDP_A_DISABLE))
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool intel_crt_present(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (INTEL_INFO(dev)->gen >= 9)
|
|
return false;
|
|
|
|
if (IS_HSW_ULT(dev) || IS_BDW_ULT(dev))
|
|
return false;
|
|
|
|
if (IS_CHERRYVIEW(dev))
|
|
return false;
|
|
|
|
if (IS_VALLEYVIEW(dev) && !dev_priv->vbt.int_crt_support)
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static void intel_setup_outputs(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_encoder *encoder;
|
|
bool dpd_is_edp = false;
|
|
|
|
intel_lvds_init(dev);
|
|
|
|
if (intel_crt_present(dev))
|
|
intel_crt_init(dev);
|
|
|
|
if (IS_BROXTON(dev)) {
|
|
/*
|
|
* FIXME: Broxton doesn't support port detection via the
|
|
* DDI_BUF_CTL_A or SFUSE_STRAP registers, find another way to
|
|
* detect the ports.
|
|
*/
|
|
intel_ddi_init(dev, PORT_A);
|
|
intel_ddi_init(dev, PORT_B);
|
|
intel_ddi_init(dev, PORT_C);
|
|
} else if (HAS_DDI(dev)) {
|
|
int found;
|
|
|
|
/*
|
|
* Haswell uses DDI functions to detect digital outputs.
|
|
* On SKL pre-D0 the strap isn't connected, so we assume
|
|
* it's there.
|
|
*/
|
|
found = I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_INIT_DISPLAY_DETECTED;
|
|
/* WaIgnoreDDIAStrap: skl */
|
|
if (found || IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
|
|
intel_ddi_init(dev, PORT_A);
|
|
|
|
/* DDI B, C and D detection is indicated by the SFUSE_STRAP
|
|
* register */
|
|
found = I915_READ(SFUSE_STRAP);
|
|
|
|
if (found & SFUSE_STRAP_DDIB_DETECTED)
|
|
intel_ddi_init(dev, PORT_B);
|
|
if (found & SFUSE_STRAP_DDIC_DETECTED)
|
|
intel_ddi_init(dev, PORT_C);
|
|
if (found & SFUSE_STRAP_DDID_DETECTED)
|
|
intel_ddi_init(dev, PORT_D);
|
|
/*
|
|
* On SKL we don't have a way to detect DDI-E so we rely on VBT.
|
|
*/
|
|
if ((IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) &&
|
|
(dev_priv->vbt.ddi_port_info[PORT_E].supports_dp ||
|
|
dev_priv->vbt.ddi_port_info[PORT_E].supports_dvi ||
|
|
dev_priv->vbt.ddi_port_info[PORT_E].supports_hdmi))
|
|
intel_ddi_init(dev, PORT_E);
|
|
|
|
} else if (HAS_PCH_SPLIT(dev)) {
|
|
int found;
|
|
dpd_is_edp = intel_dp_is_edp(dev, PORT_D);
|
|
|
|
if (has_edp_a(dev))
|
|
intel_dp_init(dev, DP_A, PORT_A);
|
|
|
|
if (I915_READ(PCH_HDMIB) & SDVO_DETECTED) {
|
|
/* PCH SDVOB multiplex with HDMIB */
|
|
found = intel_sdvo_init(dev, PCH_SDVOB, PORT_B);
|
|
if (!found)
|
|
intel_hdmi_init(dev, PCH_HDMIB, PORT_B);
|
|
if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
|
|
intel_dp_init(dev, PCH_DP_B, PORT_B);
|
|
}
|
|
|
|
if (I915_READ(PCH_HDMIC) & SDVO_DETECTED)
|
|
intel_hdmi_init(dev, PCH_HDMIC, PORT_C);
|
|
|
|
if (!dpd_is_edp && I915_READ(PCH_HDMID) & SDVO_DETECTED)
|
|
intel_hdmi_init(dev, PCH_HDMID, PORT_D);
|
|
|
|
if (I915_READ(PCH_DP_C) & DP_DETECTED)
|
|
intel_dp_init(dev, PCH_DP_C, PORT_C);
|
|
|
|
if (I915_READ(PCH_DP_D) & DP_DETECTED)
|
|
intel_dp_init(dev, PCH_DP_D, PORT_D);
|
|
} else if (IS_VALLEYVIEW(dev)) {
|
|
/*
|
|
* The DP_DETECTED bit is the latched state of the DDC
|
|
* SDA pin at boot. However since eDP doesn't require DDC
|
|
* (no way to plug in a DP->HDMI dongle) the DDC pins for
|
|
* eDP ports may have been muxed to an alternate function.
|
|
* Thus we can't rely on the DP_DETECTED bit alone to detect
|
|
* eDP ports. Consult the VBT as well as DP_DETECTED to
|
|
* detect eDP ports.
|
|
*/
|
|
if (I915_READ(VLV_HDMIB) & SDVO_DETECTED &&
|
|
!intel_dp_is_edp(dev, PORT_B))
|
|
intel_hdmi_init(dev, VLV_HDMIB, PORT_B);
|
|
if (I915_READ(VLV_DP_B) & DP_DETECTED ||
|
|
intel_dp_is_edp(dev, PORT_B))
|
|
intel_dp_init(dev, VLV_DP_B, PORT_B);
|
|
|
|
if (I915_READ(VLV_HDMIC) & SDVO_DETECTED &&
|
|
!intel_dp_is_edp(dev, PORT_C))
|
|
intel_hdmi_init(dev, VLV_HDMIC, PORT_C);
|
|
if (I915_READ(VLV_DP_C) & DP_DETECTED ||
|
|
intel_dp_is_edp(dev, PORT_C))
|
|
intel_dp_init(dev, VLV_DP_C, PORT_C);
|
|
|
|
if (IS_CHERRYVIEW(dev)) {
|
|
/* eDP not supported on port D, so don't check VBT */
|
|
if (I915_READ(CHV_HDMID) & SDVO_DETECTED)
|
|
intel_hdmi_init(dev, CHV_HDMID, PORT_D);
|
|
if (I915_READ(CHV_DP_D) & DP_DETECTED)
|
|
intel_dp_init(dev, CHV_DP_D, PORT_D);
|
|
}
|
|
|
|
intel_dsi_init(dev);
|
|
} else if (!IS_GEN2(dev) && !IS_PINEVIEW(dev)) {
|
|
bool found = false;
|
|
|
|
if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
|
|
DRM_DEBUG_KMS("probing SDVOB\n");
|
|
found = intel_sdvo_init(dev, GEN3_SDVOB, PORT_B);
|
|
if (!found && IS_G4X(dev)) {
|
|
DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
|
|
intel_hdmi_init(dev, GEN4_HDMIB, PORT_B);
|
|
}
|
|
|
|
if (!found && IS_G4X(dev))
|
|
intel_dp_init(dev, DP_B, PORT_B);
|
|
}
|
|
|
|
/* Before G4X SDVOC doesn't have its own detect register */
|
|
|
|
if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
|
|
DRM_DEBUG_KMS("probing SDVOC\n");
|
|
found = intel_sdvo_init(dev, GEN3_SDVOC, PORT_C);
|
|
}
|
|
|
|
if (!found && (I915_READ(GEN3_SDVOC) & SDVO_DETECTED)) {
|
|
|
|
if (IS_G4X(dev)) {
|
|
DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
|
|
intel_hdmi_init(dev, GEN4_HDMIC, PORT_C);
|
|
}
|
|
if (IS_G4X(dev))
|
|
intel_dp_init(dev, DP_C, PORT_C);
|
|
}
|
|
|
|
if (IS_G4X(dev) &&
|
|
(I915_READ(DP_D) & DP_DETECTED))
|
|
intel_dp_init(dev, DP_D, PORT_D);
|
|
} else if (IS_GEN2(dev))
|
|
intel_dvo_init(dev);
|
|
|
|
if (SUPPORTS_TV(dev))
|
|
intel_tv_init(dev);
|
|
|
|
intel_psr_init(dev);
|
|
|
|
for_each_intel_encoder(dev, encoder) {
|
|
encoder->base.possible_crtcs = encoder->crtc_mask;
|
|
encoder->base.possible_clones =
|
|
intel_encoder_clones(encoder);
|
|
}
|
|
|
|
intel_init_pch_refclk(dev);
|
|
|
|
drm_helper_move_panel_connectors_to_head(dev);
|
|
}
|
|
|
|
static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
|
|
{
|
|
struct drm_device *dev = fb->dev;
|
|
struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
|
|
|
|
drm_framebuffer_cleanup(fb);
|
|
mutex_lock(&dev->struct_mutex);
|
|
WARN_ON(!intel_fb->obj->framebuffer_references--);
|
|
drm_gem_object_unreference(&intel_fb->obj->base);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
kfree(intel_fb);
|
|
}
|
|
|
|
static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
|
|
struct drm_file *file,
|
|
unsigned int *handle)
|
|
{
|
|
struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
|
|
struct drm_i915_gem_object *obj = intel_fb->obj;
|
|
|
|
return drm_gem_handle_create(file, &obj->base, handle);
|
|
}
|
|
|
|
static int intel_user_framebuffer_dirty(struct drm_framebuffer *fb,
|
|
struct drm_file *file,
|
|
unsigned flags, unsigned color,
|
|
struct drm_clip_rect *clips,
|
|
unsigned num_clips)
|
|
{
|
|
struct drm_device *dev = fb->dev;
|
|
struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
|
|
struct drm_i915_gem_object *obj = intel_fb->obj;
|
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
intel_fb_obj_flush(obj, false, ORIGIN_DIRTYFB);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct drm_framebuffer_funcs intel_fb_funcs = {
|
|
.destroy = intel_user_framebuffer_destroy,
|
|
.create_handle = intel_user_framebuffer_create_handle,
|
|
.dirty = intel_user_framebuffer_dirty,
|
|
};
|
|
|
|
static
|
|
u32 intel_fb_pitch_limit(struct drm_device *dev, uint64_t fb_modifier,
|
|
uint32_t pixel_format)
|
|
{
|
|
u32 gen = INTEL_INFO(dev)->gen;
|
|
|
|
if (gen >= 9) {
|
|
/* "The stride in bytes must not exceed the of the size of 8K
|
|
* pixels and 32K bytes."
|
|
*/
|
|
return min(8192*drm_format_plane_cpp(pixel_format, 0), 32768);
|
|
} else if (gen >= 5 && !IS_VALLEYVIEW(dev)) {
|
|
return 32*1024;
|
|
} else if (gen >= 4) {
|
|
if (fb_modifier == I915_FORMAT_MOD_X_TILED)
|
|
return 16*1024;
|
|
else
|
|
return 32*1024;
|
|
} else if (gen >= 3) {
|
|
if (fb_modifier == I915_FORMAT_MOD_X_TILED)
|
|
return 8*1024;
|
|
else
|
|
return 16*1024;
|
|
} else {
|
|
/* XXX DSPC is limited to 4k tiled */
|
|
return 8*1024;
|
|
}
|
|
}
|
|
|
|
static int intel_framebuffer_init(struct drm_device *dev,
|
|
struct intel_framebuffer *intel_fb,
|
|
struct drm_mode_fb_cmd2 *mode_cmd,
|
|
struct drm_i915_gem_object *obj)
|
|
{
|
|
unsigned int aligned_height;
|
|
int ret;
|
|
u32 pitch_limit, stride_alignment;
|
|
|
|
WARN_ON(!mutex_is_locked(&dev->struct_mutex));
|
|
|
|
if (mode_cmd->flags & DRM_MODE_FB_MODIFIERS) {
|
|
/* Enforce that fb modifier and tiling mode match, but only for
|
|
* X-tiled. This is needed for FBC. */
|
|
if (!!(obj->tiling_mode == I915_TILING_X) !=
|
|
!!(mode_cmd->modifier[0] == I915_FORMAT_MOD_X_TILED)) {
|
|
DRM_DEBUG("tiling_mode doesn't match fb modifier\n");
|
|
return -EINVAL;
|
|
}
|
|
} else {
|
|
if (obj->tiling_mode == I915_TILING_X)
|
|
mode_cmd->modifier[0] = I915_FORMAT_MOD_X_TILED;
|
|
else if (obj->tiling_mode == I915_TILING_Y) {
|
|
DRM_DEBUG("No Y tiling for legacy addfb\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/* Passed in modifier sanity checking. */
|
|
switch (mode_cmd->modifier[0]) {
|
|
case I915_FORMAT_MOD_Y_TILED:
|
|
case I915_FORMAT_MOD_Yf_TILED:
|
|
if (INTEL_INFO(dev)->gen < 9) {
|
|
DRM_DEBUG("Unsupported tiling 0x%llx!\n",
|
|
mode_cmd->modifier[0]);
|
|
return -EINVAL;
|
|
}
|
|
case DRM_FORMAT_MOD_NONE:
|
|
case I915_FORMAT_MOD_X_TILED:
|
|
break;
|
|
default:
|
|
DRM_DEBUG("Unsupported fb modifier 0x%llx!\n",
|
|
mode_cmd->modifier[0]);
|
|
return -EINVAL;
|
|
}
|
|
|
|
stride_alignment = intel_fb_stride_alignment(dev, mode_cmd->modifier[0],
|
|
mode_cmd->pixel_format);
|
|
if (mode_cmd->pitches[0] & (stride_alignment - 1)) {
|
|
DRM_DEBUG("pitch (%d) must be at least %u byte aligned\n",
|
|
mode_cmd->pitches[0], stride_alignment);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pitch_limit = intel_fb_pitch_limit(dev, mode_cmd->modifier[0],
|
|
mode_cmd->pixel_format);
|
|
if (mode_cmd->pitches[0] > pitch_limit) {
|
|
DRM_DEBUG("%s pitch (%u) must be at less than %d\n",
|
|
mode_cmd->modifier[0] != DRM_FORMAT_MOD_NONE ?
|
|
"tiled" : "linear",
|
|
mode_cmd->pitches[0], pitch_limit);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (mode_cmd->modifier[0] == I915_FORMAT_MOD_X_TILED &&
|
|
mode_cmd->pitches[0] != obj->stride) {
|
|
DRM_DEBUG("pitch (%d) must match tiling stride (%d)\n",
|
|
mode_cmd->pitches[0], obj->stride);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Reject formats not supported by any plane early. */
|
|
switch (mode_cmd->pixel_format) {
|
|
case DRM_FORMAT_C8:
|
|
case DRM_FORMAT_RGB565:
|
|
case DRM_FORMAT_XRGB8888:
|
|
case DRM_FORMAT_ARGB8888:
|
|
break;
|
|
case DRM_FORMAT_XRGB1555:
|
|
if (INTEL_INFO(dev)->gen > 3) {
|
|
DRM_DEBUG("unsupported pixel format: %s\n",
|
|
drm_get_format_name(mode_cmd->pixel_format));
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
case DRM_FORMAT_ABGR8888:
|
|
if (!IS_VALLEYVIEW(dev) && INTEL_INFO(dev)->gen < 9) {
|
|
DRM_DEBUG("unsupported pixel format: %s\n",
|
|
drm_get_format_name(mode_cmd->pixel_format));
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
case DRM_FORMAT_XBGR8888:
|
|
case DRM_FORMAT_XRGB2101010:
|
|
case DRM_FORMAT_XBGR2101010:
|
|
if (INTEL_INFO(dev)->gen < 4) {
|
|
DRM_DEBUG("unsupported pixel format: %s\n",
|
|
drm_get_format_name(mode_cmd->pixel_format));
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
case DRM_FORMAT_ABGR2101010:
|
|
if (!IS_VALLEYVIEW(dev)) {
|
|
DRM_DEBUG("unsupported pixel format: %s\n",
|
|
drm_get_format_name(mode_cmd->pixel_format));
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
case DRM_FORMAT_YUYV:
|
|
case DRM_FORMAT_UYVY:
|
|
case DRM_FORMAT_YVYU:
|
|
case DRM_FORMAT_VYUY:
|
|
if (INTEL_INFO(dev)->gen < 5) {
|
|
DRM_DEBUG("unsupported pixel format: %s\n",
|
|
drm_get_format_name(mode_cmd->pixel_format));
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
default:
|
|
DRM_DEBUG("unsupported pixel format: %s\n",
|
|
drm_get_format_name(mode_cmd->pixel_format));
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* FIXME need to adjust LINOFF/TILEOFF accordingly. */
|
|
if (mode_cmd->offsets[0] != 0)
|
|
return -EINVAL;
|
|
|
|
aligned_height = intel_fb_align_height(dev, mode_cmd->height,
|
|
mode_cmd->pixel_format,
|
|
mode_cmd->modifier[0]);
|
|
/* FIXME drm helper for size checks (especially planar formats)? */
|
|
if (obj->base.size < aligned_height * mode_cmd->pitches[0])
|
|
return -EINVAL;
|
|
|
|
drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd);
|
|
intel_fb->obj = obj;
|
|
intel_fb->obj->framebuffer_references++;
|
|
|
|
ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
|
|
if (ret) {
|
|
DRM_ERROR("framebuffer init failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct drm_framebuffer *
|
|
intel_user_framebuffer_create(struct drm_device *dev,
|
|
struct drm_file *filp,
|
|
struct drm_mode_fb_cmd2 *mode_cmd)
|
|
{
|
|
struct drm_framebuffer *fb;
|
|
struct drm_i915_gem_object *obj;
|
|
|
|
obj = to_intel_bo(drm_gem_object_lookup(dev, filp,
|
|
mode_cmd->handles[0]));
|
|
if (&obj->base == NULL)
|
|
return ERR_PTR(-ENOENT);
|
|
|
|
fb = intel_framebuffer_create(dev, mode_cmd, obj);
|
|
if (IS_ERR(fb))
|
|
drm_gem_object_unreference_unlocked(&obj->base);
|
|
|
|
return fb;
|
|
}
|
|
|
|
#ifndef CONFIG_DRM_FBDEV_EMULATION
|
|
static inline void intel_fbdev_output_poll_changed(struct drm_device *dev)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
static const struct drm_mode_config_funcs intel_mode_funcs = {
|
|
.fb_create = intel_user_framebuffer_create,
|
|
.output_poll_changed = intel_fbdev_output_poll_changed,
|
|
.atomic_check = intel_atomic_check,
|
|
.atomic_commit = intel_atomic_commit,
|
|
.atomic_state_alloc = intel_atomic_state_alloc,
|
|
.atomic_state_clear = intel_atomic_state_clear,
|
|
};
|
|
|
|
/* Set up chip specific display functions */
|
|
static void intel_init_display(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (HAS_PCH_SPLIT(dev) || IS_G4X(dev))
|
|
dev_priv->display.find_dpll = g4x_find_best_dpll;
|
|
else if (IS_CHERRYVIEW(dev))
|
|
dev_priv->display.find_dpll = chv_find_best_dpll;
|
|
else if (IS_VALLEYVIEW(dev))
|
|
dev_priv->display.find_dpll = vlv_find_best_dpll;
|
|
else if (IS_PINEVIEW(dev))
|
|
dev_priv->display.find_dpll = pnv_find_best_dpll;
|
|
else
|
|
dev_priv->display.find_dpll = i9xx_find_best_dpll;
|
|
|
|
if (INTEL_INFO(dev)->gen >= 9) {
|
|
dev_priv->display.get_pipe_config = haswell_get_pipe_config;
|
|
dev_priv->display.get_initial_plane_config =
|
|
skylake_get_initial_plane_config;
|
|
dev_priv->display.crtc_compute_clock =
|
|
haswell_crtc_compute_clock;
|
|
dev_priv->display.crtc_enable = haswell_crtc_enable;
|
|
dev_priv->display.crtc_disable = haswell_crtc_disable;
|
|
dev_priv->display.update_primary_plane =
|
|
skylake_update_primary_plane;
|
|
} else if (HAS_DDI(dev)) {
|
|
dev_priv->display.get_pipe_config = haswell_get_pipe_config;
|
|
dev_priv->display.get_initial_plane_config =
|
|
ironlake_get_initial_plane_config;
|
|
dev_priv->display.crtc_compute_clock =
|
|
haswell_crtc_compute_clock;
|
|
dev_priv->display.crtc_enable = haswell_crtc_enable;
|
|
dev_priv->display.crtc_disable = haswell_crtc_disable;
|
|
dev_priv->display.update_primary_plane =
|
|
ironlake_update_primary_plane;
|
|
} else if (HAS_PCH_SPLIT(dev)) {
|
|
dev_priv->display.get_pipe_config = ironlake_get_pipe_config;
|
|
dev_priv->display.get_initial_plane_config =
|
|
ironlake_get_initial_plane_config;
|
|
dev_priv->display.crtc_compute_clock =
|
|
ironlake_crtc_compute_clock;
|
|
dev_priv->display.crtc_enable = ironlake_crtc_enable;
|
|
dev_priv->display.crtc_disable = ironlake_crtc_disable;
|
|
dev_priv->display.update_primary_plane =
|
|
ironlake_update_primary_plane;
|
|
} else if (IS_VALLEYVIEW(dev)) {
|
|
dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
|
|
dev_priv->display.get_initial_plane_config =
|
|
i9xx_get_initial_plane_config;
|
|
dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
|
|
dev_priv->display.crtc_enable = valleyview_crtc_enable;
|
|
dev_priv->display.crtc_disable = i9xx_crtc_disable;
|
|
dev_priv->display.update_primary_plane =
|
|
i9xx_update_primary_plane;
|
|
} else {
|
|
dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
|
|
dev_priv->display.get_initial_plane_config =
|
|
i9xx_get_initial_plane_config;
|
|
dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
|
|
dev_priv->display.crtc_enable = i9xx_crtc_enable;
|
|
dev_priv->display.crtc_disable = i9xx_crtc_disable;
|
|
dev_priv->display.update_primary_plane =
|
|
i9xx_update_primary_plane;
|
|
}
|
|
|
|
/* Returns the core display clock speed */
|
|
if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
|
|
dev_priv->display.get_display_clock_speed =
|
|
skylake_get_display_clock_speed;
|
|
else if (IS_BROXTON(dev))
|
|
dev_priv->display.get_display_clock_speed =
|
|
broxton_get_display_clock_speed;
|
|
else if (IS_BROADWELL(dev))
|
|
dev_priv->display.get_display_clock_speed =
|
|
broadwell_get_display_clock_speed;
|
|
else if (IS_HASWELL(dev))
|
|
dev_priv->display.get_display_clock_speed =
|
|
haswell_get_display_clock_speed;
|
|
else if (IS_VALLEYVIEW(dev))
|
|
dev_priv->display.get_display_clock_speed =
|
|
valleyview_get_display_clock_speed;
|
|
else if (IS_GEN5(dev))
|
|
dev_priv->display.get_display_clock_speed =
|
|
ilk_get_display_clock_speed;
|
|
else if (IS_I945G(dev) || IS_BROADWATER(dev) ||
|
|
IS_GEN6(dev) || IS_IVYBRIDGE(dev))
|
|
dev_priv->display.get_display_clock_speed =
|
|
i945_get_display_clock_speed;
|
|
else if (IS_GM45(dev))
|
|
dev_priv->display.get_display_clock_speed =
|
|
gm45_get_display_clock_speed;
|
|
else if (IS_CRESTLINE(dev))
|
|
dev_priv->display.get_display_clock_speed =
|
|
i965gm_get_display_clock_speed;
|
|
else if (IS_PINEVIEW(dev))
|
|
dev_priv->display.get_display_clock_speed =
|
|
pnv_get_display_clock_speed;
|
|
else if (IS_G33(dev) || IS_G4X(dev))
|
|
dev_priv->display.get_display_clock_speed =
|
|
g33_get_display_clock_speed;
|
|
else if (IS_I915G(dev))
|
|
dev_priv->display.get_display_clock_speed =
|
|
i915_get_display_clock_speed;
|
|
else if (IS_I945GM(dev) || IS_845G(dev))
|
|
dev_priv->display.get_display_clock_speed =
|
|
i9xx_misc_get_display_clock_speed;
|
|
else if (IS_PINEVIEW(dev))
|
|
dev_priv->display.get_display_clock_speed =
|
|
pnv_get_display_clock_speed;
|
|
else if (IS_I915GM(dev))
|
|
dev_priv->display.get_display_clock_speed =
|
|
i915gm_get_display_clock_speed;
|
|
else if (IS_I865G(dev))
|
|
dev_priv->display.get_display_clock_speed =
|
|
i865_get_display_clock_speed;
|
|
else if (IS_I85X(dev))
|
|
dev_priv->display.get_display_clock_speed =
|
|
i85x_get_display_clock_speed;
|
|
else { /* 830 */
|
|
WARN(!IS_I830(dev), "Unknown platform. Assuming 133 MHz CDCLK\n");
|
|
dev_priv->display.get_display_clock_speed =
|
|
i830_get_display_clock_speed;
|
|
}
|
|
|
|
if (IS_GEN5(dev)) {
|
|
dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
|
|
} else if (IS_GEN6(dev)) {
|
|
dev_priv->display.fdi_link_train = gen6_fdi_link_train;
|
|
} else if (IS_IVYBRIDGE(dev)) {
|
|
/* FIXME: detect B0+ stepping and use auto training */
|
|
dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
|
|
} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
|
|
dev_priv->display.fdi_link_train = hsw_fdi_link_train;
|
|
if (IS_BROADWELL(dev)) {
|
|
dev_priv->display.modeset_commit_cdclk =
|
|
broadwell_modeset_commit_cdclk;
|
|
dev_priv->display.modeset_calc_cdclk =
|
|
broadwell_modeset_calc_cdclk;
|
|
}
|
|
} else if (IS_VALLEYVIEW(dev)) {
|
|
dev_priv->display.modeset_commit_cdclk =
|
|
valleyview_modeset_commit_cdclk;
|
|
dev_priv->display.modeset_calc_cdclk =
|
|
valleyview_modeset_calc_cdclk;
|
|
} else if (IS_BROXTON(dev)) {
|
|
dev_priv->display.modeset_commit_cdclk =
|
|
broxton_modeset_commit_cdclk;
|
|
dev_priv->display.modeset_calc_cdclk =
|
|
broxton_modeset_calc_cdclk;
|
|
}
|
|
|
|
switch (INTEL_INFO(dev)->gen) {
|
|
case 2:
|
|
dev_priv->display.queue_flip = intel_gen2_queue_flip;
|
|
break;
|
|
|
|
case 3:
|
|
dev_priv->display.queue_flip = intel_gen3_queue_flip;
|
|
break;
|
|
|
|
case 4:
|
|
case 5:
|
|
dev_priv->display.queue_flip = intel_gen4_queue_flip;
|
|
break;
|
|
|
|
case 6:
|
|
dev_priv->display.queue_flip = intel_gen6_queue_flip;
|
|
break;
|
|
case 7:
|
|
case 8: /* FIXME(BDW): Check that the gen8 RCS flip works. */
|
|
dev_priv->display.queue_flip = intel_gen7_queue_flip;
|
|
break;
|
|
case 9:
|
|
/* Drop through - unsupported since execlist only. */
|
|
default:
|
|
/* Default just returns -ENODEV to indicate unsupported */
|
|
dev_priv->display.queue_flip = intel_default_queue_flip;
|
|
}
|
|
|
|
mutex_init(&dev_priv->pps_mutex);
|
|
}
|
|
|
|
/*
|
|
* Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend,
|
|
* resume, or other times. This quirk makes sure that's the case for
|
|
* affected systems.
|
|
*/
|
|
static void quirk_pipea_force(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
dev_priv->quirks |= QUIRK_PIPEA_FORCE;
|
|
DRM_INFO("applying pipe a force quirk\n");
|
|
}
|
|
|
|
static void quirk_pipeb_force(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
dev_priv->quirks |= QUIRK_PIPEB_FORCE;
|
|
DRM_INFO("applying pipe b force quirk\n");
|
|
}
|
|
|
|
/*
|
|
* Some machines (Lenovo U160) do not work with SSC on LVDS for some reason
|
|
*/
|
|
static void quirk_ssc_force_disable(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE;
|
|
DRM_INFO("applying lvds SSC disable quirk\n");
|
|
}
|
|
|
|
/*
|
|
* A machine (e.g. Acer Aspire 5734Z) may need to invert the panel backlight
|
|
* brightness value
|
|
*/
|
|
static void quirk_invert_brightness(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
dev_priv->quirks |= QUIRK_INVERT_BRIGHTNESS;
|
|
DRM_INFO("applying inverted panel brightness quirk\n");
|
|
}
|
|
|
|
/* Some VBT's incorrectly indicate no backlight is present */
|
|
static void quirk_backlight_present(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
dev_priv->quirks |= QUIRK_BACKLIGHT_PRESENT;
|
|
DRM_INFO("applying backlight present quirk\n");
|
|
}
|
|
|
|
struct intel_quirk {
|
|
int device;
|
|
int subsystem_vendor;
|
|
int subsystem_device;
|
|
void (*hook)(struct drm_device *dev);
|
|
};
|
|
|
|
/* For systems that don't have a meaningful PCI subdevice/subvendor ID */
|
|
struct intel_dmi_quirk {
|
|
void (*hook)(struct drm_device *dev);
|
|
const struct dmi_system_id (*dmi_id_list)[];
|
|
};
|
|
|
|
static int intel_dmi_reverse_brightness(const struct dmi_system_id *id)
|
|
{
|
|
DRM_INFO("Backlight polarity reversed on %s\n", id->ident);
|
|
return 1;
|
|
}
|
|
|
|
static const struct intel_dmi_quirk intel_dmi_quirks[] = {
|
|
{
|
|
.dmi_id_list = &(const struct dmi_system_id[]) {
|
|
{
|
|
.callback = intel_dmi_reverse_brightness,
|
|
.ident = "NCR Corporation",
|
|
.matches = {DMI_MATCH(DMI_SYS_VENDOR, "NCR Corporation"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, ""),
|
|
},
|
|
},
|
|
{ } /* terminating entry */
|
|
},
|
|
.hook = quirk_invert_brightness,
|
|
},
|
|
};
|
|
|
|
static struct intel_quirk intel_quirks[] = {
|
|
/* Toshiba Protege R-205, S-209 needs pipe A force quirk */
|
|
{ 0x2592, 0x1179, 0x0001, quirk_pipea_force },
|
|
|
|
/* ThinkPad T60 needs pipe A force quirk (bug #16494) */
|
|
{ 0x2782, 0x17aa, 0x201a, quirk_pipea_force },
|
|
|
|
/* 830 needs to leave pipe A & dpll A up */
|
|
{ 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
|
|
|
|
/* 830 needs to leave pipe B & dpll B up */
|
|
{ 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipeb_force },
|
|
|
|
/* Lenovo U160 cannot use SSC on LVDS */
|
|
{ 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable },
|
|
|
|
/* Sony Vaio Y cannot use SSC on LVDS */
|
|
{ 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable },
|
|
|
|
/* Acer Aspire 5734Z must invert backlight brightness */
|
|
{ 0x2a42, 0x1025, 0x0459, quirk_invert_brightness },
|
|
|
|
/* Acer/eMachines G725 */
|
|
{ 0x2a42, 0x1025, 0x0210, quirk_invert_brightness },
|
|
|
|
/* Acer/eMachines e725 */
|
|
{ 0x2a42, 0x1025, 0x0212, quirk_invert_brightness },
|
|
|
|
/* Acer/Packard Bell NCL20 */
|
|
{ 0x2a42, 0x1025, 0x034b, quirk_invert_brightness },
|
|
|
|
/* Acer Aspire 4736Z */
|
|
{ 0x2a42, 0x1025, 0x0260, quirk_invert_brightness },
|
|
|
|
/* Acer Aspire 5336 */
|
|
{ 0x2a42, 0x1025, 0x048a, quirk_invert_brightness },
|
|
|
|
/* Acer C720 and C720P Chromebooks (Celeron 2955U) have backlights */
|
|
{ 0x0a06, 0x1025, 0x0a11, quirk_backlight_present },
|
|
|
|
/* Acer C720 Chromebook (Core i3 4005U) */
|
|
{ 0x0a16, 0x1025, 0x0a11, quirk_backlight_present },
|
|
|
|
/* Apple Macbook 2,1 (Core 2 T7400) */
|
|
{ 0x27a2, 0x8086, 0x7270, quirk_backlight_present },
|
|
|
|
/* Toshiba CB35 Chromebook (Celeron 2955U) */
|
|
{ 0x0a06, 0x1179, 0x0a88, quirk_backlight_present },
|
|
|
|
/* HP Chromebook 14 (Celeron 2955U) */
|
|
{ 0x0a06, 0x103c, 0x21ed, quirk_backlight_present },
|
|
|
|
/* Dell Chromebook 11 */
|
|
{ 0x0a06, 0x1028, 0x0a35, quirk_backlight_present },
|
|
};
|
|
|
|
static void intel_init_quirks(struct drm_device *dev)
|
|
{
|
|
struct pci_dev *d = dev->pdev;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) {
|
|
struct intel_quirk *q = &intel_quirks[i];
|
|
|
|
if (d->device == q->device &&
|
|
(d->subsystem_vendor == q->subsystem_vendor ||
|
|
q->subsystem_vendor == PCI_ANY_ID) &&
|
|
(d->subsystem_device == q->subsystem_device ||
|
|
q->subsystem_device == PCI_ANY_ID))
|
|
q->hook(dev);
|
|
}
|
|
for (i = 0; i < ARRAY_SIZE(intel_dmi_quirks); i++) {
|
|
if (dmi_check_system(*intel_dmi_quirks[i].dmi_id_list) != 0)
|
|
intel_dmi_quirks[i].hook(dev);
|
|
}
|
|
}
|
|
|
|
/* Disable the VGA plane that we never use */
|
|
static void i915_disable_vga(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u8 sr1;
|
|
i915_reg_t vga_reg = i915_vgacntrl_reg(dev);
|
|
|
|
/* WaEnableVGAAccessThroughIOPort:ctg,elk,ilk,snb,ivb,vlv,hsw */
|
|
vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
|
|
outb(SR01, VGA_SR_INDEX);
|
|
sr1 = inb(VGA_SR_DATA);
|
|
outb(sr1 | 1<<5, VGA_SR_DATA);
|
|
vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
|
|
udelay(300);
|
|
|
|
I915_WRITE(vga_reg, VGA_DISP_DISABLE);
|
|
POSTING_READ(vga_reg);
|
|
}
|
|
|
|
void intel_modeset_init_hw(struct drm_device *dev)
|
|
{
|
|
intel_update_cdclk(dev);
|
|
intel_prepare_ddi(dev);
|
|
intel_init_clock_gating(dev);
|
|
intel_enable_gt_powersave(dev);
|
|
}
|
|
|
|
void intel_modeset_init(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int sprite, ret;
|
|
enum pipe pipe;
|
|
struct intel_crtc *crtc;
|
|
|
|
drm_mode_config_init(dev);
|
|
|
|
dev->mode_config.min_width = 0;
|
|
dev->mode_config.min_height = 0;
|
|
|
|
dev->mode_config.preferred_depth = 24;
|
|
dev->mode_config.prefer_shadow = 1;
|
|
|
|
dev->mode_config.allow_fb_modifiers = true;
|
|
|
|
dev->mode_config.funcs = &intel_mode_funcs;
|
|
|
|
intel_init_quirks(dev);
|
|
|
|
intel_init_pm(dev);
|
|
|
|
if (INTEL_INFO(dev)->num_pipes == 0)
|
|
return;
|
|
|
|
/*
|
|
* There may be no VBT; and if the BIOS enabled SSC we can
|
|
* just keep using it to avoid unnecessary flicker. Whereas if the
|
|
* BIOS isn't using it, don't assume it will work even if the VBT
|
|
* indicates as much.
|
|
*/
|
|
if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
|
|
bool bios_lvds_use_ssc = !!(I915_READ(PCH_DREF_CONTROL) &
|
|
DREF_SSC1_ENABLE);
|
|
|
|
if (dev_priv->vbt.lvds_use_ssc != bios_lvds_use_ssc) {
|
|
DRM_DEBUG_KMS("SSC %sabled by BIOS, overriding VBT which says %sabled\n",
|
|
bios_lvds_use_ssc ? "en" : "dis",
|
|
dev_priv->vbt.lvds_use_ssc ? "en" : "dis");
|
|
dev_priv->vbt.lvds_use_ssc = bios_lvds_use_ssc;
|
|
}
|
|
}
|
|
|
|
intel_init_display(dev);
|
|
intel_init_audio(dev);
|
|
|
|
if (IS_GEN2(dev)) {
|
|
dev->mode_config.max_width = 2048;
|
|
dev->mode_config.max_height = 2048;
|
|
} else if (IS_GEN3(dev)) {
|
|
dev->mode_config.max_width = 4096;
|
|
dev->mode_config.max_height = 4096;
|
|
} else {
|
|
dev->mode_config.max_width = 8192;
|
|
dev->mode_config.max_height = 8192;
|
|
}
|
|
|
|
if (IS_845G(dev) || IS_I865G(dev)) {
|
|
dev->mode_config.cursor_width = IS_845G(dev) ? 64 : 512;
|
|
dev->mode_config.cursor_height = 1023;
|
|
} else if (IS_GEN2(dev)) {
|
|
dev->mode_config.cursor_width = GEN2_CURSOR_WIDTH;
|
|
dev->mode_config.cursor_height = GEN2_CURSOR_HEIGHT;
|
|
} else {
|
|
dev->mode_config.cursor_width = MAX_CURSOR_WIDTH;
|
|
dev->mode_config.cursor_height = MAX_CURSOR_HEIGHT;
|
|
}
|
|
|
|
dev->mode_config.fb_base = dev_priv->gtt.mappable_base;
|
|
|
|
DRM_DEBUG_KMS("%d display pipe%s available.\n",
|
|
INTEL_INFO(dev)->num_pipes,
|
|
INTEL_INFO(dev)->num_pipes > 1 ? "s" : "");
|
|
|
|
for_each_pipe(dev_priv, pipe) {
|
|
intel_crtc_init(dev, pipe);
|
|
for_each_sprite(dev_priv, pipe, sprite) {
|
|
ret = intel_plane_init(dev, pipe, sprite);
|
|
if (ret)
|
|
DRM_DEBUG_KMS("pipe %c sprite %c init failed: %d\n",
|
|
pipe_name(pipe), sprite_name(pipe, sprite), ret);
|
|
}
|
|
}
|
|
|
|
intel_update_czclk(dev_priv);
|
|
intel_update_cdclk(dev);
|
|
|
|
intel_shared_dpll_init(dev);
|
|
|
|
/* Just disable it once at startup */
|
|
i915_disable_vga(dev);
|
|
intel_setup_outputs(dev);
|
|
|
|
drm_modeset_lock_all(dev);
|
|
intel_modeset_setup_hw_state(dev);
|
|
drm_modeset_unlock_all(dev);
|
|
|
|
for_each_intel_crtc(dev, crtc) {
|
|
struct intel_initial_plane_config plane_config = {};
|
|
|
|
if (!crtc->active)
|
|
continue;
|
|
|
|
/*
|
|
* Note that reserving the BIOS fb up front prevents us
|
|
* from stuffing other stolen allocations like the ring
|
|
* on top. This prevents some ugliness at boot time, and
|
|
* can even allow for smooth boot transitions if the BIOS
|
|
* fb is large enough for the active pipe configuration.
|
|
*/
|
|
dev_priv->display.get_initial_plane_config(crtc,
|
|
&plane_config);
|
|
|
|
/*
|
|
* If the fb is shared between multiple heads, we'll
|
|
* just get the first one.
|
|
*/
|
|
intel_find_initial_plane_obj(crtc, &plane_config);
|
|
}
|
|
}
|
|
|
|
static void intel_enable_pipe_a(struct drm_device *dev)
|
|
{
|
|
struct intel_connector *connector;
|
|
struct drm_connector *crt = NULL;
|
|
struct intel_load_detect_pipe load_detect_temp;
|
|
struct drm_modeset_acquire_ctx *ctx = dev->mode_config.acquire_ctx;
|
|
|
|
/* We can't just switch on the pipe A, we need to set things up with a
|
|
* proper mode and output configuration. As a gross hack, enable pipe A
|
|
* by enabling the load detect pipe once. */
|
|
for_each_intel_connector(dev, connector) {
|
|
if (connector->encoder->type == INTEL_OUTPUT_ANALOG) {
|
|
crt = &connector->base;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!crt)
|
|
return;
|
|
|
|
if (intel_get_load_detect_pipe(crt, NULL, &load_detect_temp, ctx))
|
|
intel_release_load_detect_pipe(crt, &load_detect_temp, ctx);
|
|
}
|
|
|
|
static bool
|
|
intel_check_plane_mapping(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 val;
|
|
|
|
if (INTEL_INFO(dev)->num_pipes == 1)
|
|
return true;
|
|
|
|
val = I915_READ(DSPCNTR(!crtc->plane));
|
|
|
|
if ((val & DISPLAY_PLANE_ENABLE) &&
|
|
(!!(val & DISPPLANE_SEL_PIPE_MASK) == crtc->pipe))
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool intel_crtc_has_encoders(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct intel_encoder *encoder;
|
|
|
|
for_each_encoder_on_crtc(dev, &crtc->base, encoder)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
static void intel_sanitize_crtc(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
i915_reg_t reg = PIPECONF(crtc->config->cpu_transcoder);
|
|
|
|
/* Clear any frame start delays used for debugging left by the BIOS */
|
|
I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK);
|
|
|
|
/* restore vblank interrupts to correct state */
|
|
drm_crtc_vblank_reset(&crtc->base);
|
|
if (crtc->active) {
|
|
struct intel_plane *plane;
|
|
|
|
drm_crtc_vblank_on(&crtc->base);
|
|
|
|
/* Disable everything but the primary plane */
|
|
for_each_intel_plane_on_crtc(dev, crtc, plane) {
|
|
if (plane->base.type == DRM_PLANE_TYPE_PRIMARY)
|
|
continue;
|
|
|
|
plane->disable_plane(&plane->base, &crtc->base);
|
|
}
|
|
}
|
|
|
|
/* We need to sanitize the plane -> pipe mapping first because this will
|
|
* disable the crtc (and hence change the state) if it is wrong. Note
|
|
* that gen4+ has a fixed plane -> pipe mapping. */
|
|
if (INTEL_INFO(dev)->gen < 4 && !intel_check_plane_mapping(crtc)) {
|
|
bool plane;
|
|
|
|
DRM_DEBUG_KMS("[CRTC:%d] wrong plane connection detected!\n",
|
|
crtc->base.base.id);
|
|
|
|
/* Pipe has the wrong plane attached and the plane is active.
|
|
* Temporarily change the plane mapping and disable everything
|
|
* ... */
|
|
plane = crtc->plane;
|
|
to_intel_plane_state(crtc->base.primary->state)->visible = true;
|
|
crtc->plane = !plane;
|
|
intel_crtc_disable_noatomic(&crtc->base);
|
|
crtc->plane = plane;
|
|
}
|
|
|
|
if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
|
|
crtc->pipe == PIPE_A && !crtc->active) {
|
|
/* BIOS forgot to enable pipe A, this mostly happens after
|
|
* resume. Force-enable the pipe to fix this, the update_dpms
|
|
* call below we restore the pipe to the right state, but leave
|
|
* the required bits on. */
|
|
intel_enable_pipe_a(dev);
|
|
}
|
|
|
|
/* Adjust the state of the output pipe according to whether we
|
|
* have active connectors/encoders. */
|
|
if (!intel_crtc_has_encoders(crtc))
|
|
intel_crtc_disable_noatomic(&crtc->base);
|
|
|
|
if (crtc->active != crtc->base.state->active) {
|
|
struct intel_encoder *encoder;
|
|
|
|
/* This can happen either due to bugs in the get_hw_state
|
|
* functions or because of calls to intel_crtc_disable_noatomic,
|
|
* or because the pipe is force-enabled due to the
|
|
* pipe A quirk. */
|
|
DRM_DEBUG_KMS("[CRTC:%d] hw state adjusted, was %s, now %s\n",
|
|
crtc->base.base.id,
|
|
crtc->base.state->enable ? "enabled" : "disabled",
|
|
crtc->active ? "enabled" : "disabled");
|
|
|
|
WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, NULL) < 0);
|
|
crtc->base.state->active = crtc->active;
|
|
crtc->base.enabled = crtc->active;
|
|
|
|
/* Because we only establish the connector -> encoder ->
|
|
* crtc links if something is active, this means the
|
|
* crtc is now deactivated. Break the links. connector
|
|
* -> encoder links are only establish when things are
|
|
* actually up, hence no need to break them. */
|
|
WARN_ON(crtc->active);
|
|
|
|
for_each_encoder_on_crtc(dev, &crtc->base, encoder)
|
|
encoder->base.crtc = NULL;
|
|
}
|
|
|
|
if (crtc->active || HAS_GMCH_DISPLAY(dev)) {
|
|
/*
|
|
* We start out with underrun reporting disabled to avoid races.
|
|
* For correct bookkeeping mark this on active crtcs.
|
|
*
|
|
* Also on gmch platforms we dont have any hardware bits to
|
|
* disable the underrun reporting. Which means we need to start
|
|
* out with underrun reporting disabled also on inactive pipes,
|
|
* since otherwise we'll complain about the garbage we read when
|
|
* e.g. coming up after runtime pm.
|
|
*
|
|
* No protection against concurrent access is required - at
|
|
* worst a fifo underrun happens which also sets this to false.
|
|
*/
|
|
crtc->cpu_fifo_underrun_disabled = true;
|
|
crtc->pch_fifo_underrun_disabled = true;
|
|
}
|
|
}
|
|
|
|
static void intel_sanitize_encoder(struct intel_encoder *encoder)
|
|
{
|
|
struct intel_connector *connector;
|
|
struct drm_device *dev = encoder->base.dev;
|
|
bool active = false;
|
|
|
|
/* We need to check both for a crtc link (meaning that the
|
|
* encoder is active and trying to read from a pipe) and the
|
|
* pipe itself being active. */
|
|
bool has_active_crtc = encoder->base.crtc &&
|
|
to_intel_crtc(encoder->base.crtc)->active;
|
|
|
|
for_each_intel_connector(dev, connector) {
|
|
if (connector->base.encoder != &encoder->base)
|
|
continue;
|
|
|
|
active = true;
|
|
break;
|
|
}
|
|
|
|
if (active && !has_active_crtc) {
|
|
DRM_DEBUG_KMS("[ENCODER:%d:%s] has active connectors but no active pipe!\n",
|
|
encoder->base.base.id,
|
|
encoder->base.name);
|
|
|
|
/* Connector is active, but has no active pipe. This is
|
|
* fallout from our resume register restoring. Disable
|
|
* the encoder manually again. */
|
|
if (encoder->base.crtc) {
|
|
DRM_DEBUG_KMS("[ENCODER:%d:%s] manually disabled\n",
|
|
encoder->base.base.id,
|
|
encoder->base.name);
|
|
encoder->disable(encoder);
|
|
if (encoder->post_disable)
|
|
encoder->post_disable(encoder);
|
|
}
|
|
encoder->base.crtc = NULL;
|
|
|
|
/* Inconsistent output/port/pipe state happens presumably due to
|
|
* a bug in one of the get_hw_state functions. Or someplace else
|
|
* in our code, like the register restore mess on resume. Clamp
|
|
* things to off as a safer default. */
|
|
for_each_intel_connector(dev, connector) {
|
|
if (connector->encoder != encoder)
|
|
continue;
|
|
connector->base.dpms = DRM_MODE_DPMS_OFF;
|
|
connector->base.encoder = NULL;
|
|
}
|
|
}
|
|
/* Enabled encoders without active connectors will be fixed in
|
|
* the crtc fixup. */
|
|
}
|
|
|
|
void i915_redisable_vga_power_on(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
i915_reg_t vga_reg = i915_vgacntrl_reg(dev);
|
|
|
|
if (!(I915_READ(vga_reg) & VGA_DISP_DISABLE)) {
|
|
DRM_DEBUG_KMS("Something enabled VGA plane, disabling it\n");
|
|
i915_disable_vga(dev);
|
|
}
|
|
}
|
|
|
|
void i915_redisable_vga(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
/* This function can be called both from intel_modeset_setup_hw_state or
|
|
* at a very early point in our resume sequence, where the power well
|
|
* structures are not yet restored. Since this function is at a very
|
|
* paranoid "someone might have enabled VGA while we were not looking"
|
|
* level, just check if the power well is enabled instead of trying to
|
|
* follow the "don't touch the power well if we don't need it" policy
|
|
* the rest of the driver uses. */
|
|
if (!intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_VGA))
|
|
return;
|
|
|
|
i915_redisable_vga_power_on(dev);
|
|
}
|
|
|
|
static bool primary_get_hw_state(struct intel_plane *plane)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
|
|
|
|
return I915_READ(DSPCNTR(plane->plane)) & DISPLAY_PLANE_ENABLE;
|
|
}
|
|
|
|
/* FIXME read out full plane state for all planes */
|
|
static void readout_plane_state(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_plane *primary = crtc->base.primary;
|
|
struct intel_plane_state *plane_state =
|
|
to_intel_plane_state(primary->state);
|
|
|
|
plane_state->visible = crtc->active &&
|
|
primary_get_hw_state(to_intel_plane(primary));
|
|
|
|
if (plane_state->visible)
|
|
crtc->base.state->plane_mask |= 1 << drm_plane_index(primary);
|
|
}
|
|
|
|
static void intel_modeset_readout_hw_state(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
enum pipe pipe;
|
|
struct intel_crtc *crtc;
|
|
struct intel_encoder *encoder;
|
|
struct intel_connector *connector;
|
|
int i;
|
|
|
|
for_each_intel_crtc(dev, crtc) {
|
|
__drm_atomic_helper_crtc_destroy_state(&crtc->base, crtc->base.state);
|
|
memset(crtc->config, 0, sizeof(*crtc->config));
|
|
crtc->config->base.crtc = &crtc->base;
|
|
|
|
crtc->active = dev_priv->display.get_pipe_config(crtc,
|
|
crtc->config);
|
|
|
|
crtc->base.state->active = crtc->active;
|
|
crtc->base.enabled = crtc->active;
|
|
|
|
readout_plane_state(crtc);
|
|
|
|
DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n",
|
|
crtc->base.base.id,
|
|
crtc->active ? "enabled" : "disabled");
|
|
}
|
|
|
|
for (i = 0; i < dev_priv->num_shared_dpll; i++) {
|
|
struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
|
|
|
|
pll->on = pll->get_hw_state(dev_priv, pll,
|
|
&pll->config.hw_state);
|
|
pll->active = 0;
|
|
pll->config.crtc_mask = 0;
|
|
for_each_intel_crtc(dev, crtc) {
|
|
if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll) {
|
|
pll->active++;
|
|
pll->config.crtc_mask |= 1 << crtc->pipe;
|
|
}
|
|
}
|
|
|
|
DRM_DEBUG_KMS("%s hw state readout: crtc_mask 0x%08x, on %i\n",
|
|
pll->name, pll->config.crtc_mask, pll->on);
|
|
|
|
if (pll->config.crtc_mask)
|
|
intel_display_power_get(dev_priv, POWER_DOMAIN_PLLS);
|
|
}
|
|
|
|
for_each_intel_encoder(dev, encoder) {
|
|
pipe = 0;
|
|
|
|
if (encoder->get_hw_state(encoder, &pipe)) {
|
|
crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
|
|
encoder->base.crtc = &crtc->base;
|
|
encoder->get_config(encoder, crtc->config);
|
|
} else {
|
|
encoder->base.crtc = NULL;
|
|
}
|
|
|
|
DRM_DEBUG_KMS("[ENCODER:%d:%s] hw state readout: %s, pipe %c\n",
|
|
encoder->base.base.id,
|
|
encoder->base.name,
|
|
encoder->base.crtc ? "enabled" : "disabled",
|
|
pipe_name(pipe));
|
|
}
|
|
|
|
for_each_intel_connector(dev, connector) {
|
|
if (connector->get_hw_state(connector)) {
|
|
connector->base.dpms = DRM_MODE_DPMS_ON;
|
|
connector->base.encoder = &connector->encoder->base;
|
|
} else {
|
|
connector->base.dpms = DRM_MODE_DPMS_OFF;
|
|
connector->base.encoder = NULL;
|
|
}
|
|
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] hw state readout: %s\n",
|
|
connector->base.base.id,
|
|
connector->base.name,
|
|
connector->base.encoder ? "enabled" : "disabled");
|
|
}
|
|
|
|
for_each_intel_crtc(dev, crtc) {
|
|
crtc->base.hwmode = crtc->config->base.adjusted_mode;
|
|
|
|
memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
|
|
if (crtc->base.state->active) {
|
|
intel_mode_from_pipe_config(&crtc->base.mode, crtc->config);
|
|
intel_mode_from_pipe_config(&crtc->base.state->adjusted_mode, crtc->config);
|
|
WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, &crtc->base.mode));
|
|
|
|
/*
|
|
* The initial mode needs to be set in order to keep
|
|
* the atomic core happy. It wants a valid mode if the
|
|
* crtc's enabled, so we do the above call.
|
|
*
|
|
* At this point some state updated by the connectors
|
|
* in their ->detect() callback has not run yet, so
|
|
* no recalculation can be done yet.
|
|
*
|
|
* Even if we could do a recalculation and modeset
|
|
* right now it would cause a double modeset if
|
|
* fbdev or userspace chooses a different initial mode.
|
|
*
|
|
* If that happens, someone indicated they wanted a
|
|
* mode change, which means it's safe to do a full
|
|
* recalculation.
|
|
*/
|
|
crtc->base.state->mode.private_flags = I915_MODE_FLAG_INHERITED;
|
|
|
|
drm_calc_timestamping_constants(&crtc->base, &crtc->base.hwmode);
|
|
update_scanline_offset(crtc);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Scan out the current hw modeset state,
|
|
* and sanitizes it to the current state
|
|
*/
|
|
static void
|
|
intel_modeset_setup_hw_state(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
enum pipe pipe;
|
|
struct intel_crtc *crtc;
|
|
struct intel_encoder *encoder;
|
|
int i;
|
|
|
|
intel_modeset_readout_hw_state(dev);
|
|
|
|
/* HW state is read out, now we need to sanitize this mess. */
|
|
for_each_intel_encoder(dev, encoder) {
|
|
intel_sanitize_encoder(encoder);
|
|
}
|
|
|
|
for_each_pipe(dev_priv, pipe) {
|
|
crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
|
|
intel_sanitize_crtc(crtc);
|
|
intel_dump_pipe_config(crtc, crtc->config,
|
|
"[setup_hw_state]");
|
|
}
|
|
|
|
intel_modeset_update_connector_atomic_state(dev);
|
|
|
|
for (i = 0; i < dev_priv->num_shared_dpll; i++) {
|
|
struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
|
|
|
|
if (!pll->on || pll->active)
|
|
continue;
|
|
|
|
DRM_DEBUG_KMS("%s enabled but not in use, disabling\n", pll->name);
|
|
|
|
pll->disable(dev_priv, pll);
|
|
pll->on = false;
|
|
}
|
|
|
|
if (IS_VALLEYVIEW(dev))
|
|
vlv_wm_get_hw_state(dev);
|
|
else if (IS_GEN9(dev))
|
|
skl_wm_get_hw_state(dev);
|
|
else if (HAS_PCH_SPLIT(dev))
|
|
ilk_wm_get_hw_state(dev);
|
|
|
|
for_each_intel_crtc(dev, crtc) {
|
|
unsigned long put_domains;
|
|
|
|
put_domains = modeset_get_crtc_power_domains(&crtc->base);
|
|
if (WARN_ON(put_domains))
|
|
modeset_put_power_domains(dev_priv, put_domains);
|
|
}
|
|
intel_display_set_init_power(dev_priv, false);
|
|
}
|
|
|
|
void intel_display_resume(struct drm_device *dev)
|
|
{
|
|
struct drm_atomic_state *state = drm_atomic_state_alloc(dev);
|
|
struct intel_connector *conn;
|
|
struct intel_plane *plane;
|
|
struct drm_crtc *crtc;
|
|
int ret;
|
|
|
|
if (!state)
|
|
return;
|
|
|
|
state->acquire_ctx = dev->mode_config.acquire_ctx;
|
|
|
|
/* preserve complete old state, including dpll */
|
|
intel_atomic_get_shared_dpll_state(state);
|
|
|
|
for_each_crtc(dev, crtc) {
|
|
struct drm_crtc_state *crtc_state =
|
|
drm_atomic_get_crtc_state(state, crtc);
|
|
|
|
ret = PTR_ERR_OR_ZERO(crtc_state);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* force a restore */
|
|
crtc_state->mode_changed = true;
|
|
}
|
|
|
|
for_each_intel_plane(dev, plane) {
|
|
ret = PTR_ERR_OR_ZERO(drm_atomic_get_plane_state(state, &plane->base));
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
for_each_intel_connector(dev, conn) {
|
|
ret = PTR_ERR_OR_ZERO(drm_atomic_get_connector_state(state, &conn->base));
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
intel_modeset_setup_hw_state(dev);
|
|
|
|
i915_redisable_vga(dev);
|
|
ret = drm_atomic_commit(state);
|
|
if (!ret)
|
|
return;
|
|
|
|
err:
|
|
DRM_ERROR("Restoring old state failed with %i\n", ret);
|
|
drm_atomic_state_free(state);
|
|
}
|
|
|
|
void intel_modeset_gem_init(struct drm_device *dev)
|
|
{
|
|
struct drm_crtc *c;
|
|
struct drm_i915_gem_object *obj;
|
|
int ret;
|
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
intel_init_gt_powersave(dev);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
intel_modeset_init_hw(dev);
|
|
|
|
intel_setup_overlay(dev);
|
|
|
|
/*
|
|
* Make sure any fbs we allocated at startup are properly
|
|
* pinned & fenced. When we do the allocation it's too early
|
|
* for this.
|
|
*/
|
|
for_each_crtc(dev, c) {
|
|
obj = intel_fb_obj(c->primary->fb);
|
|
if (obj == NULL)
|
|
continue;
|
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
ret = intel_pin_and_fence_fb_obj(c->primary,
|
|
c->primary->fb,
|
|
c->primary->state);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
if (ret) {
|
|
DRM_ERROR("failed to pin boot fb on pipe %d\n",
|
|
to_intel_crtc(c)->pipe);
|
|
drm_framebuffer_unreference(c->primary->fb);
|
|
c->primary->fb = NULL;
|
|
c->primary->crtc = c->primary->state->crtc = NULL;
|
|
update_state_fb(c->primary);
|
|
c->state->plane_mask &= ~(1 << drm_plane_index(c->primary));
|
|
}
|
|
}
|
|
|
|
intel_backlight_register(dev);
|
|
}
|
|
|
|
void intel_connector_unregister(struct intel_connector *intel_connector)
|
|
{
|
|
struct drm_connector *connector = &intel_connector->base;
|
|
|
|
intel_panel_destroy_backlight(connector);
|
|
drm_connector_unregister(connector);
|
|
}
|
|
|
|
void intel_modeset_cleanup(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_connector *connector;
|
|
|
|
intel_disable_gt_powersave(dev);
|
|
|
|
intel_backlight_unregister(dev);
|
|
|
|
/*
|
|
* Interrupts and polling as the first thing to avoid creating havoc.
|
|
* Too much stuff here (turning of connectors, ...) would
|
|
* experience fancy races otherwise.
|
|
*/
|
|
intel_irq_uninstall(dev_priv);
|
|
|
|
/*
|
|
* Due to the hpd irq storm handling the hotplug work can re-arm the
|
|
* poll handlers. Hence disable polling after hpd handling is shut down.
|
|
*/
|
|
drm_kms_helper_poll_fini(dev);
|
|
|
|
intel_unregister_dsm_handler();
|
|
|
|
intel_fbc_disable(dev_priv);
|
|
|
|
/* flush any delayed tasks or pending work */
|
|
flush_scheduled_work();
|
|
|
|
/* destroy the backlight and sysfs files before encoders/connectors */
|
|
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
|
|
struct intel_connector *intel_connector;
|
|
|
|
intel_connector = to_intel_connector(connector);
|
|
intel_connector->unregister(intel_connector);
|
|
}
|
|
|
|
drm_mode_config_cleanup(dev);
|
|
|
|
intel_cleanup_overlay(dev);
|
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
intel_cleanup_gt_powersave(dev);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
}
|
|
|
|
/*
|
|
* Return which encoder is currently attached for connector.
|
|
*/
|
|
struct drm_encoder *intel_best_encoder(struct drm_connector *connector)
|
|
{
|
|
return &intel_attached_encoder(connector)->base;
|
|
}
|
|
|
|
void intel_connector_attach_encoder(struct intel_connector *connector,
|
|
struct intel_encoder *encoder)
|
|
{
|
|
connector->encoder = encoder;
|
|
drm_mode_connector_attach_encoder(&connector->base,
|
|
&encoder->base);
|
|
}
|
|
|
|
/*
|
|
* set vga decode state - true == enable VGA decode
|
|
*/
|
|
int intel_modeset_vga_set_state(struct drm_device *dev, bool state)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
unsigned reg = INTEL_INFO(dev)->gen >= 6 ? SNB_GMCH_CTRL : INTEL_GMCH_CTRL;
|
|
u16 gmch_ctrl;
|
|
|
|
if (pci_read_config_word(dev_priv->bridge_dev, reg, &gmch_ctrl)) {
|
|
DRM_ERROR("failed to read control word\n");
|
|
return -EIO;
|
|
}
|
|
|
|
if (!!(gmch_ctrl & INTEL_GMCH_VGA_DISABLE) == !state)
|
|
return 0;
|
|
|
|
if (state)
|
|
gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE;
|
|
else
|
|
gmch_ctrl |= INTEL_GMCH_VGA_DISABLE;
|
|
|
|
if (pci_write_config_word(dev_priv->bridge_dev, reg, gmch_ctrl)) {
|
|
DRM_ERROR("failed to write control word\n");
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct intel_display_error_state {
|
|
|
|
u32 power_well_driver;
|
|
|
|
int num_transcoders;
|
|
|
|
struct intel_cursor_error_state {
|
|
u32 control;
|
|
u32 position;
|
|
u32 base;
|
|
u32 size;
|
|
} cursor[I915_MAX_PIPES];
|
|
|
|
struct intel_pipe_error_state {
|
|
bool power_domain_on;
|
|
u32 source;
|
|
u32 stat;
|
|
} pipe[I915_MAX_PIPES];
|
|
|
|
struct intel_plane_error_state {
|
|
u32 control;
|
|
u32 stride;
|
|
u32 size;
|
|
u32 pos;
|
|
u32 addr;
|
|
u32 surface;
|
|
u32 tile_offset;
|
|
} plane[I915_MAX_PIPES];
|
|
|
|
struct intel_transcoder_error_state {
|
|
bool power_domain_on;
|
|
enum transcoder cpu_transcoder;
|
|
|
|
u32 conf;
|
|
|
|
u32 htotal;
|
|
u32 hblank;
|
|
u32 hsync;
|
|
u32 vtotal;
|
|
u32 vblank;
|
|
u32 vsync;
|
|
} transcoder[4];
|
|
};
|
|
|
|
struct intel_display_error_state *
|
|
intel_display_capture_error_state(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_display_error_state *error;
|
|
int transcoders[] = {
|
|
TRANSCODER_A,
|
|
TRANSCODER_B,
|
|
TRANSCODER_C,
|
|
TRANSCODER_EDP,
|
|
};
|
|
int i;
|
|
|
|
if (INTEL_INFO(dev)->num_pipes == 0)
|
|
return NULL;
|
|
|
|
error = kzalloc(sizeof(*error), GFP_ATOMIC);
|
|
if (error == NULL)
|
|
return NULL;
|
|
|
|
if (IS_HASWELL(dev) || IS_BROADWELL(dev))
|
|
error->power_well_driver = I915_READ(HSW_PWR_WELL_DRIVER);
|
|
|
|
for_each_pipe(dev_priv, i) {
|
|
error->pipe[i].power_domain_on =
|
|
__intel_display_power_is_enabled(dev_priv,
|
|
POWER_DOMAIN_PIPE(i));
|
|
if (!error->pipe[i].power_domain_on)
|
|
continue;
|
|
|
|
error->cursor[i].control = I915_READ(CURCNTR(i));
|
|
error->cursor[i].position = I915_READ(CURPOS(i));
|
|
error->cursor[i].base = I915_READ(CURBASE(i));
|
|
|
|
error->plane[i].control = I915_READ(DSPCNTR(i));
|
|
error->plane[i].stride = I915_READ(DSPSTRIDE(i));
|
|
if (INTEL_INFO(dev)->gen <= 3) {
|
|
error->plane[i].size = I915_READ(DSPSIZE(i));
|
|
error->plane[i].pos = I915_READ(DSPPOS(i));
|
|
}
|
|
if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
|
|
error->plane[i].addr = I915_READ(DSPADDR(i));
|
|
if (INTEL_INFO(dev)->gen >= 4) {
|
|
error->plane[i].surface = I915_READ(DSPSURF(i));
|
|
error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i));
|
|
}
|
|
|
|
error->pipe[i].source = I915_READ(PIPESRC(i));
|
|
|
|
if (HAS_GMCH_DISPLAY(dev))
|
|
error->pipe[i].stat = I915_READ(PIPESTAT(i));
|
|
}
|
|
|
|
error->num_transcoders = INTEL_INFO(dev)->num_pipes;
|
|
if (HAS_DDI(dev_priv->dev))
|
|
error->num_transcoders++; /* Account for eDP. */
|
|
|
|
for (i = 0; i < error->num_transcoders; i++) {
|
|
enum transcoder cpu_transcoder = transcoders[i];
|
|
|
|
error->transcoder[i].power_domain_on =
|
|
__intel_display_power_is_enabled(dev_priv,
|
|
POWER_DOMAIN_TRANSCODER(cpu_transcoder));
|
|
if (!error->transcoder[i].power_domain_on)
|
|
continue;
|
|
|
|
error->transcoder[i].cpu_transcoder = cpu_transcoder;
|
|
|
|
error->transcoder[i].conf = I915_READ(PIPECONF(cpu_transcoder));
|
|
error->transcoder[i].htotal = I915_READ(HTOTAL(cpu_transcoder));
|
|
error->transcoder[i].hblank = I915_READ(HBLANK(cpu_transcoder));
|
|
error->transcoder[i].hsync = I915_READ(HSYNC(cpu_transcoder));
|
|
error->transcoder[i].vtotal = I915_READ(VTOTAL(cpu_transcoder));
|
|
error->transcoder[i].vblank = I915_READ(VBLANK(cpu_transcoder));
|
|
error->transcoder[i].vsync = I915_READ(VSYNC(cpu_transcoder));
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
#define err_printf(e, ...) i915_error_printf(e, __VA_ARGS__)
|
|
|
|
void
|
|
intel_display_print_error_state(struct drm_i915_error_state_buf *m,
|
|
struct drm_device *dev,
|
|
struct intel_display_error_state *error)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int i;
|
|
|
|
if (!error)
|
|
return;
|
|
|
|
err_printf(m, "Num Pipes: %d\n", INTEL_INFO(dev)->num_pipes);
|
|
if (IS_HASWELL(dev) || IS_BROADWELL(dev))
|
|
err_printf(m, "PWR_WELL_CTL2: %08x\n",
|
|
error->power_well_driver);
|
|
for_each_pipe(dev_priv, i) {
|
|
err_printf(m, "Pipe [%d]:\n", i);
|
|
err_printf(m, " Power: %s\n",
|
|
error->pipe[i].power_domain_on ? "on" : "off");
|
|
err_printf(m, " SRC: %08x\n", error->pipe[i].source);
|
|
err_printf(m, " STAT: %08x\n", error->pipe[i].stat);
|
|
|
|
err_printf(m, "Plane [%d]:\n", i);
|
|
err_printf(m, " CNTR: %08x\n", error->plane[i].control);
|
|
err_printf(m, " STRIDE: %08x\n", error->plane[i].stride);
|
|
if (INTEL_INFO(dev)->gen <= 3) {
|
|
err_printf(m, " SIZE: %08x\n", error->plane[i].size);
|
|
err_printf(m, " POS: %08x\n", error->plane[i].pos);
|
|
}
|
|
if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
|
|
err_printf(m, " ADDR: %08x\n", error->plane[i].addr);
|
|
if (INTEL_INFO(dev)->gen >= 4) {
|
|
err_printf(m, " SURF: %08x\n", error->plane[i].surface);
|
|
err_printf(m, " TILEOFF: %08x\n", error->plane[i].tile_offset);
|
|
}
|
|
|
|
err_printf(m, "Cursor [%d]:\n", i);
|
|
err_printf(m, " CNTR: %08x\n", error->cursor[i].control);
|
|
err_printf(m, " POS: %08x\n", error->cursor[i].position);
|
|
err_printf(m, " BASE: %08x\n", error->cursor[i].base);
|
|
}
|
|
|
|
for (i = 0; i < error->num_transcoders; i++) {
|
|
err_printf(m, "CPU transcoder: %c\n",
|
|
transcoder_name(error->transcoder[i].cpu_transcoder));
|
|
err_printf(m, " Power: %s\n",
|
|
error->transcoder[i].power_domain_on ? "on" : "off");
|
|
err_printf(m, " CONF: %08x\n", error->transcoder[i].conf);
|
|
err_printf(m, " HTOTAL: %08x\n", error->transcoder[i].htotal);
|
|
err_printf(m, " HBLANK: %08x\n", error->transcoder[i].hblank);
|
|
err_printf(m, " HSYNC: %08x\n", error->transcoder[i].hsync);
|
|
err_printf(m, " VTOTAL: %08x\n", error->transcoder[i].vtotal);
|
|
err_printf(m, " VBLANK: %08x\n", error->transcoder[i].vblank);
|
|
err_printf(m, " VSYNC: %08x\n", error->transcoder[i].vsync);
|
|
}
|
|
}
|
|
|
|
void intel_modeset_preclose(struct drm_device *dev, struct drm_file *file)
|
|
{
|
|
struct intel_crtc *crtc;
|
|
|
|
for_each_intel_crtc(dev, crtc) {
|
|
struct intel_unpin_work *work;
|
|
|
|
spin_lock_irq(&dev->event_lock);
|
|
|
|
work = crtc->unpin_work;
|
|
|
|
if (work && work->event &&
|
|
work->event->base.file_priv == file) {
|
|
kfree(work->event);
|
|
work->event = NULL;
|
|
}
|
|
|
|
spin_unlock_irq(&dev->event_lock);
|
|
}
|
|
}
|