mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-14 22:44:27 +08:00
0484cde1df
Stopping streaming on a camera pipeline at system suspend time, and restarting it at system resume time, requires coordinated action between the bridge driver and the camera sensor driver. This is handled by the bridge driver calling the sensor's .s_stream() handler at system suspend and resume time. There is thus no need for the sensor to independently implement system sleep PM operations. Drop them. The streaming field of the driver's private structure is now unused, drop it as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
1084 lines
22 KiB
C
1084 lines
22 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* imx214.c - imx214 sensor driver
|
|
*
|
|
* Copyright 2018 Qtechnology A/S
|
|
*
|
|
* Ricardo Ribalda <ribalda@kernel.org>
|
|
*/
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <media/media-entity.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-fwnode.h>
|
|
#include <media/v4l2-subdev.h>
|
|
|
|
#define IMX214_DEFAULT_CLK_FREQ 24000000
|
|
#define IMX214_DEFAULT_LINK_FREQ 480000000
|
|
#define IMX214_DEFAULT_PIXEL_RATE ((IMX214_DEFAULT_LINK_FREQ * 8LL) / 10)
|
|
#define IMX214_FPS 30
|
|
#define IMX214_MBUS_CODE MEDIA_BUS_FMT_SRGGB10_1X10
|
|
|
|
static const char * const imx214_supply_name[] = {
|
|
"vdda",
|
|
"vddd",
|
|
"vdddo",
|
|
};
|
|
|
|
#define IMX214_NUM_SUPPLIES ARRAY_SIZE(imx214_supply_name)
|
|
|
|
struct imx214 {
|
|
struct device *dev;
|
|
struct clk *xclk;
|
|
struct regmap *regmap;
|
|
|
|
struct v4l2_subdev sd;
|
|
struct media_pad pad;
|
|
struct v4l2_mbus_framefmt fmt;
|
|
struct v4l2_rect crop;
|
|
|
|
struct v4l2_ctrl_handler ctrls;
|
|
struct v4l2_ctrl *pixel_rate;
|
|
struct v4l2_ctrl *link_freq;
|
|
struct v4l2_ctrl *exposure;
|
|
struct v4l2_ctrl *unit_size;
|
|
|
|
struct regulator_bulk_data supplies[IMX214_NUM_SUPPLIES];
|
|
|
|
struct gpio_desc *enable_gpio;
|
|
|
|
/*
|
|
* Serialize control access, get/set format, get selection
|
|
* and start streaming.
|
|
*/
|
|
struct mutex mutex;
|
|
};
|
|
|
|
struct reg_8 {
|
|
u16 addr;
|
|
u8 val;
|
|
};
|
|
|
|
enum {
|
|
IMX214_TABLE_WAIT_MS = 0,
|
|
IMX214_TABLE_END,
|
|
IMX214_MAX_RETRIES,
|
|
IMX214_WAIT_MS
|
|
};
|
|
|
|
/*From imx214_mode_tbls.h*/
|
|
static const struct reg_8 mode_4096x2304[] = {
|
|
{0x0114, 0x03},
|
|
{0x0220, 0x00},
|
|
{0x0221, 0x11},
|
|
{0x0222, 0x01},
|
|
{0x0340, 0x0C},
|
|
{0x0341, 0x7A},
|
|
{0x0342, 0x13},
|
|
{0x0343, 0x90},
|
|
{0x0344, 0x00},
|
|
{0x0345, 0x38},
|
|
{0x0346, 0x01},
|
|
{0x0347, 0x98},
|
|
{0x0348, 0x10},
|
|
{0x0349, 0x37},
|
|
{0x034A, 0x0A},
|
|
{0x034B, 0x97},
|
|
{0x0381, 0x01},
|
|
{0x0383, 0x01},
|
|
{0x0385, 0x01},
|
|
{0x0387, 0x01},
|
|
{0x0900, 0x00},
|
|
{0x0901, 0x00},
|
|
{0x0902, 0x00},
|
|
{0x3000, 0x35},
|
|
{0x3054, 0x01},
|
|
{0x305C, 0x11},
|
|
|
|
{0x0112, 0x0A},
|
|
{0x0113, 0x0A},
|
|
{0x034C, 0x10},
|
|
{0x034D, 0x00},
|
|
{0x034E, 0x09},
|
|
{0x034F, 0x00},
|
|
{0x0401, 0x00},
|
|
{0x0404, 0x00},
|
|
{0x0405, 0x10},
|
|
{0x0408, 0x00},
|
|
{0x0409, 0x00},
|
|
{0x040A, 0x00},
|
|
{0x040B, 0x00},
|
|
{0x040C, 0x10},
|
|
{0x040D, 0x00},
|
|
{0x040E, 0x09},
|
|
{0x040F, 0x00},
|
|
|
|
{0x0301, 0x05},
|
|
{0x0303, 0x02},
|
|
{0x0305, 0x03},
|
|
{0x0306, 0x00},
|
|
{0x0307, 0x96},
|
|
{0x0309, 0x0A},
|
|
{0x030B, 0x01},
|
|
{0x0310, 0x00},
|
|
|
|
{0x0820, 0x12},
|
|
{0x0821, 0xC0},
|
|
{0x0822, 0x00},
|
|
{0x0823, 0x00},
|
|
|
|
{0x3A03, 0x09},
|
|
{0x3A04, 0x50},
|
|
{0x3A05, 0x01},
|
|
|
|
{0x0B06, 0x01},
|
|
{0x30A2, 0x00},
|
|
|
|
{0x30B4, 0x00},
|
|
|
|
{0x3A02, 0xFF},
|
|
|
|
{0x3011, 0x00},
|
|
{0x3013, 0x01},
|
|
|
|
{0x0202, 0x0C},
|
|
{0x0203, 0x70},
|
|
{0x0224, 0x01},
|
|
{0x0225, 0xF4},
|
|
|
|
{0x0204, 0x00},
|
|
{0x0205, 0x00},
|
|
{0x020E, 0x01},
|
|
{0x020F, 0x00},
|
|
{0x0210, 0x01},
|
|
{0x0211, 0x00},
|
|
{0x0212, 0x01},
|
|
{0x0213, 0x00},
|
|
{0x0214, 0x01},
|
|
{0x0215, 0x00},
|
|
{0x0216, 0x00},
|
|
{0x0217, 0x00},
|
|
|
|
{0x4170, 0x00},
|
|
{0x4171, 0x10},
|
|
{0x4176, 0x00},
|
|
{0x4177, 0x3C},
|
|
{0xAE20, 0x04},
|
|
{0xAE21, 0x5C},
|
|
|
|
{IMX214_TABLE_WAIT_MS, 10},
|
|
{0x0138, 0x01},
|
|
{IMX214_TABLE_END, 0x00}
|
|
};
|
|
|
|
static const struct reg_8 mode_1920x1080[] = {
|
|
{0x0114, 0x03},
|
|
{0x0220, 0x00},
|
|
{0x0221, 0x11},
|
|
{0x0222, 0x01},
|
|
{0x0340, 0x0C},
|
|
{0x0341, 0x7A},
|
|
{0x0342, 0x13},
|
|
{0x0343, 0x90},
|
|
{0x0344, 0x04},
|
|
{0x0345, 0x78},
|
|
{0x0346, 0x03},
|
|
{0x0347, 0xFC},
|
|
{0x0348, 0x0B},
|
|
{0x0349, 0xF7},
|
|
{0x034A, 0x08},
|
|
{0x034B, 0x33},
|
|
{0x0381, 0x01},
|
|
{0x0383, 0x01},
|
|
{0x0385, 0x01},
|
|
{0x0387, 0x01},
|
|
{0x0900, 0x00},
|
|
{0x0901, 0x00},
|
|
{0x0902, 0x00},
|
|
{0x3000, 0x35},
|
|
{0x3054, 0x01},
|
|
{0x305C, 0x11},
|
|
|
|
{0x0112, 0x0A},
|
|
{0x0113, 0x0A},
|
|
{0x034C, 0x07},
|
|
{0x034D, 0x80},
|
|
{0x034E, 0x04},
|
|
{0x034F, 0x38},
|
|
{0x0401, 0x00},
|
|
{0x0404, 0x00},
|
|
{0x0405, 0x10},
|
|
{0x0408, 0x00},
|
|
{0x0409, 0x00},
|
|
{0x040A, 0x00},
|
|
{0x040B, 0x00},
|
|
{0x040C, 0x07},
|
|
{0x040D, 0x80},
|
|
{0x040E, 0x04},
|
|
{0x040F, 0x38},
|
|
|
|
{0x0301, 0x05},
|
|
{0x0303, 0x02},
|
|
{0x0305, 0x03},
|
|
{0x0306, 0x00},
|
|
{0x0307, 0x96},
|
|
{0x0309, 0x0A},
|
|
{0x030B, 0x01},
|
|
{0x0310, 0x00},
|
|
|
|
{0x0820, 0x12},
|
|
{0x0821, 0xC0},
|
|
{0x0822, 0x00},
|
|
{0x0823, 0x00},
|
|
|
|
{0x3A03, 0x04},
|
|
{0x3A04, 0xF8},
|
|
{0x3A05, 0x02},
|
|
|
|
{0x0B06, 0x01},
|
|
{0x30A2, 0x00},
|
|
|
|
{0x30B4, 0x00},
|
|
|
|
{0x3A02, 0xFF},
|
|
|
|
{0x3011, 0x00},
|
|
{0x3013, 0x01},
|
|
|
|
{0x0202, 0x0C},
|
|
{0x0203, 0x70},
|
|
{0x0224, 0x01},
|
|
{0x0225, 0xF4},
|
|
|
|
{0x0204, 0x00},
|
|
{0x0205, 0x00},
|
|
{0x020E, 0x01},
|
|
{0x020F, 0x00},
|
|
{0x0210, 0x01},
|
|
{0x0211, 0x00},
|
|
{0x0212, 0x01},
|
|
{0x0213, 0x00},
|
|
{0x0214, 0x01},
|
|
{0x0215, 0x00},
|
|
{0x0216, 0x00},
|
|
{0x0217, 0x00},
|
|
|
|
{0x4170, 0x00},
|
|
{0x4171, 0x10},
|
|
{0x4176, 0x00},
|
|
{0x4177, 0x3C},
|
|
{0xAE20, 0x04},
|
|
{0xAE21, 0x5C},
|
|
|
|
{IMX214_TABLE_WAIT_MS, 10},
|
|
{0x0138, 0x01},
|
|
{IMX214_TABLE_END, 0x00}
|
|
};
|
|
|
|
static const struct reg_8 mode_table_common[] = {
|
|
/* software reset */
|
|
|
|
/* software standby settings */
|
|
{0x0100, 0x00},
|
|
|
|
/* ATR setting */
|
|
{0x9300, 0x02},
|
|
|
|
/* external clock setting */
|
|
{0x0136, 0x18},
|
|
{0x0137, 0x00},
|
|
|
|
/* global setting */
|
|
/* basic config */
|
|
{0x0101, 0x00},
|
|
{0x0105, 0x01},
|
|
{0x0106, 0x01},
|
|
{0x4550, 0x02},
|
|
{0x4601, 0x00},
|
|
{0x4642, 0x05},
|
|
{0x6227, 0x11},
|
|
{0x6276, 0x00},
|
|
{0x900E, 0x06},
|
|
{0xA802, 0x90},
|
|
{0xA803, 0x11},
|
|
{0xA804, 0x62},
|
|
{0xA805, 0x77},
|
|
{0xA806, 0xAE},
|
|
{0xA807, 0x34},
|
|
{0xA808, 0xAE},
|
|
{0xA809, 0x35},
|
|
{0xA80A, 0x62},
|
|
{0xA80B, 0x83},
|
|
{0xAE33, 0x00},
|
|
|
|
/* analog setting */
|
|
{0x4174, 0x00},
|
|
{0x4175, 0x11},
|
|
{0x4612, 0x29},
|
|
{0x461B, 0x12},
|
|
{0x461F, 0x06},
|
|
{0x4635, 0x07},
|
|
{0x4637, 0x30},
|
|
{0x463F, 0x18},
|
|
{0x4641, 0x0D},
|
|
{0x465B, 0x12},
|
|
{0x465F, 0x11},
|
|
{0x4663, 0x11},
|
|
{0x4667, 0x0F},
|
|
{0x466F, 0x0F},
|
|
{0x470E, 0x09},
|
|
{0x4909, 0xAB},
|
|
{0x490B, 0x95},
|
|
{0x4915, 0x5D},
|
|
{0x4A5F, 0xFF},
|
|
{0x4A61, 0xFF},
|
|
{0x4A73, 0x62},
|
|
{0x4A85, 0x00},
|
|
{0x4A87, 0xFF},
|
|
|
|
/* embedded data */
|
|
{0x5041, 0x04},
|
|
{0x583C, 0x04},
|
|
{0x620E, 0x04},
|
|
{0x6EB2, 0x01},
|
|
{0x6EB3, 0x00},
|
|
{0x9300, 0x02},
|
|
|
|
/* imagequality */
|
|
/* HDR setting */
|
|
{0x3001, 0x07},
|
|
{0x6D12, 0x3F},
|
|
{0x6D13, 0xFF},
|
|
{0x9344, 0x03},
|
|
{0x9706, 0x10},
|
|
{0x9707, 0x03},
|
|
{0x9708, 0x03},
|
|
{0x9E04, 0x01},
|
|
{0x9E05, 0x00},
|
|
{0x9E0C, 0x01},
|
|
{0x9E0D, 0x02},
|
|
{0x9E24, 0x00},
|
|
{0x9E25, 0x8C},
|
|
{0x9E26, 0x00},
|
|
{0x9E27, 0x94},
|
|
{0x9E28, 0x00},
|
|
{0x9E29, 0x96},
|
|
|
|
/* CNR parameter setting */
|
|
{0x69DB, 0x01},
|
|
|
|
/* Moire reduction */
|
|
{0x6957, 0x01},
|
|
|
|
/* image enhancement */
|
|
{0x6987, 0x17},
|
|
{0x698A, 0x03},
|
|
{0x698B, 0x03},
|
|
|
|
/* white balanace */
|
|
{0x0B8E, 0x01},
|
|
{0x0B8F, 0x00},
|
|
{0x0B90, 0x01},
|
|
{0x0B91, 0x00},
|
|
{0x0B92, 0x01},
|
|
{0x0B93, 0x00},
|
|
{0x0B94, 0x01},
|
|
{0x0B95, 0x00},
|
|
|
|
/* ATR setting */
|
|
{0x6E50, 0x00},
|
|
{0x6E51, 0x32},
|
|
{0x9340, 0x00},
|
|
{0x9341, 0x3C},
|
|
{0x9342, 0x03},
|
|
{0x9343, 0xFF},
|
|
{IMX214_TABLE_END, 0x00}
|
|
};
|
|
|
|
/*
|
|
* Declare modes in order, from biggest
|
|
* to smallest height.
|
|
*/
|
|
static const struct imx214_mode {
|
|
u32 width;
|
|
u32 height;
|
|
const struct reg_8 *reg_table;
|
|
} imx214_modes[] = {
|
|
{
|
|
.width = 4096,
|
|
.height = 2304,
|
|
.reg_table = mode_4096x2304,
|
|
},
|
|
{
|
|
.width = 1920,
|
|
.height = 1080,
|
|
.reg_table = mode_1920x1080,
|
|
},
|
|
};
|
|
|
|
static inline struct imx214 *to_imx214(struct v4l2_subdev *sd)
|
|
{
|
|
return container_of(sd, struct imx214, sd);
|
|
}
|
|
|
|
static int __maybe_unused imx214_power_on(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct imx214 *imx214 = to_imx214(sd);
|
|
int ret;
|
|
|
|
ret = regulator_bulk_enable(IMX214_NUM_SUPPLIES, imx214->supplies);
|
|
if (ret < 0) {
|
|
dev_err(imx214->dev, "failed to enable regulators: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
usleep_range(2000, 3000);
|
|
|
|
ret = clk_prepare_enable(imx214->xclk);
|
|
if (ret < 0) {
|
|
regulator_bulk_disable(IMX214_NUM_SUPPLIES, imx214->supplies);
|
|
dev_err(imx214->dev, "clk prepare enable failed\n");
|
|
return ret;
|
|
}
|
|
|
|
gpiod_set_value_cansleep(imx214->enable_gpio, 1);
|
|
usleep_range(12000, 15000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused imx214_power_off(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct imx214 *imx214 = to_imx214(sd);
|
|
|
|
gpiod_set_value_cansleep(imx214->enable_gpio, 0);
|
|
|
|
clk_disable_unprepare(imx214->xclk);
|
|
|
|
regulator_bulk_disable(IMX214_NUM_SUPPLIES, imx214->supplies);
|
|
usleep_range(10, 20);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx214_enum_mbus_code(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_mbus_code_enum *code)
|
|
{
|
|
if (code->index > 0)
|
|
return -EINVAL;
|
|
|
|
code->code = IMX214_MBUS_CODE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx214_enum_frame_size(struct v4l2_subdev *subdev,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_frame_size_enum *fse)
|
|
{
|
|
if (fse->code != IMX214_MBUS_CODE)
|
|
return -EINVAL;
|
|
|
|
if (fse->index >= ARRAY_SIZE(imx214_modes))
|
|
return -EINVAL;
|
|
|
|
fse->min_width = fse->max_width = imx214_modes[fse->index].width;
|
|
fse->min_height = fse->max_height = imx214_modes[fse->index].height;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
static int imx214_s_register(struct v4l2_subdev *subdev,
|
|
const struct v4l2_dbg_register *reg)
|
|
{
|
|
struct imx214 *imx214 = container_of(subdev, struct imx214, sd);
|
|
|
|
return regmap_write(imx214->regmap, reg->reg, reg->val);
|
|
}
|
|
|
|
static int imx214_g_register(struct v4l2_subdev *subdev,
|
|
struct v4l2_dbg_register *reg)
|
|
{
|
|
struct imx214 *imx214 = container_of(subdev, struct imx214, sd);
|
|
unsigned int aux;
|
|
int ret;
|
|
|
|
reg->size = 1;
|
|
ret = regmap_read(imx214->regmap, reg->reg, &aux);
|
|
reg->val = aux;
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
static const struct v4l2_subdev_core_ops imx214_core_ops = {
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
.g_register = imx214_g_register,
|
|
.s_register = imx214_s_register,
|
|
#endif
|
|
};
|
|
|
|
static struct v4l2_mbus_framefmt *
|
|
__imx214_get_pad_format(struct imx214 *imx214,
|
|
struct v4l2_subdev_state *sd_state,
|
|
unsigned int pad,
|
|
enum v4l2_subdev_format_whence which)
|
|
{
|
|
switch (which) {
|
|
case V4L2_SUBDEV_FORMAT_TRY:
|
|
return v4l2_subdev_get_try_format(&imx214->sd, sd_state, pad);
|
|
case V4L2_SUBDEV_FORMAT_ACTIVE:
|
|
return &imx214->fmt;
|
|
default:
|
|
return NULL;
|
|
}
|
|
}
|
|
|
|
static int imx214_get_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_format *format)
|
|
{
|
|
struct imx214 *imx214 = to_imx214(sd);
|
|
|
|
mutex_lock(&imx214->mutex);
|
|
format->format = *__imx214_get_pad_format(imx214, sd_state,
|
|
format->pad,
|
|
format->which);
|
|
mutex_unlock(&imx214->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct v4l2_rect *
|
|
__imx214_get_pad_crop(struct imx214 *imx214,
|
|
struct v4l2_subdev_state *sd_state,
|
|
unsigned int pad, enum v4l2_subdev_format_whence which)
|
|
{
|
|
switch (which) {
|
|
case V4L2_SUBDEV_FORMAT_TRY:
|
|
return v4l2_subdev_get_try_crop(&imx214->sd, sd_state, pad);
|
|
case V4L2_SUBDEV_FORMAT_ACTIVE:
|
|
return &imx214->crop;
|
|
default:
|
|
return NULL;
|
|
}
|
|
}
|
|
|
|
static int imx214_set_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_format *format)
|
|
{
|
|
struct imx214 *imx214 = to_imx214(sd);
|
|
struct v4l2_mbus_framefmt *__format;
|
|
struct v4l2_rect *__crop;
|
|
const struct imx214_mode *mode;
|
|
|
|
mutex_lock(&imx214->mutex);
|
|
|
|
__crop = __imx214_get_pad_crop(imx214, sd_state, format->pad,
|
|
format->which);
|
|
|
|
mode = v4l2_find_nearest_size(imx214_modes,
|
|
ARRAY_SIZE(imx214_modes), width, height,
|
|
format->format.width,
|
|
format->format.height);
|
|
|
|
__crop->width = mode->width;
|
|
__crop->height = mode->height;
|
|
|
|
__format = __imx214_get_pad_format(imx214, sd_state, format->pad,
|
|
format->which);
|
|
__format->width = __crop->width;
|
|
__format->height = __crop->height;
|
|
__format->code = IMX214_MBUS_CODE;
|
|
__format->field = V4L2_FIELD_NONE;
|
|
__format->colorspace = V4L2_COLORSPACE_SRGB;
|
|
__format->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(__format->colorspace);
|
|
__format->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true,
|
|
__format->colorspace, __format->ycbcr_enc);
|
|
__format->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(__format->colorspace);
|
|
|
|
format->format = *__format;
|
|
|
|
mutex_unlock(&imx214->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx214_get_selection(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_selection *sel)
|
|
{
|
|
struct imx214 *imx214 = to_imx214(sd);
|
|
|
|
if (sel->target != V4L2_SEL_TGT_CROP)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&imx214->mutex);
|
|
sel->r = *__imx214_get_pad_crop(imx214, sd_state, sel->pad,
|
|
sel->which);
|
|
mutex_unlock(&imx214->mutex);
|
|
return 0;
|
|
}
|
|
|
|
static int imx214_entity_init_cfg(struct v4l2_subdev *subdev,
|
|
struct v4l2_subdev_state *sd_state)
|
|
{
|
|
struct v4l2_subdev_format fmt = { };
|
|
|
|
fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
|
|
fmt.format.width = imx214_modes[0].width;
|
|
fmt.format.height = imx214_modes[0].height;
|
|
|
|
imx214_set_format(subdev, sd_state, &fmt);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx214_set_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct imx214 *imx214 = container_of(ctrl->handler,
|
|
struct imx214, ctrls);
|
|
u8 vals[2];
|
|
int ret;
|
|
|
|
/*
|
|
* Applying V4L2 control value only happens
|
|
* when power is up for streaming
|
|
*/
|
|
if (!pm_runtime_get_if_in_use(imx214->dev))
|
|
return 0;
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_EXPOSURE:
|
|
vals[1] = ctrl->val;
|
|
vals[0] = ctrl->val >> 8;
|
|
ret = regmap_bulk_write(imx214->regmap, 0x202, vals, 2);
|
|
if (ret < 0)
|
|
dev_err(imx214->dev, "Error %d\n", ret);
|
|
ret = 0;
|
|
break;
|
|
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
pm_runtime_put(imx214->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct v4l2_ctrl_ops imx214_ctrl_ops = {
|
|
.s_ctrl = imx214_set_ctrl,
|
|
};
|
|
|
|
#define MAX_CMD 4
|
|
static int imx214_write_table(struct imx214 *imx214,
|
|
const struct reg_8 table[])
|
|
{
|
|
u8 vals[MAX_CMD];
|
|
int i;
|
|
int ret;
|
|
|
|
for (; table->addr != IMX214_TABLE_END ; table++) {
|
|
if (table->addr == IMX214_TABLE_WAIT_MS) {
|
|
usleep_range(table->val * 1000,
|
|
table->val * 1000 + 500);
|
|
continue;
|
|
}
|
|
|
|
for (i = 0; i < MAX_CMD; i++) {
|
|
if (table[i].addr != (table[0].addr + i))
|
|
break;
|
|
vals[i] = table[i].val;
|
|
}
|
|
|
|
ret = regmap_bulk_write(imx214->regmap, table->addr, vals, i);
|
|
|
|
if (ret) {
|
|
dev_err(imx214->dev, "write_table error: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
table += i - 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx214_start_streaming(struct imx214 *imx214)
|
|
{
|
|
const struct imx214_mode *mode;
|
|
int ret;
|
|
|
|
mutex_lock(&imx214->mutex);
|
|
ret = imx214_write_table(imx214, mode_table_common);
|
|
if (ret < 0) {
|
|
dev_err(imx214->dev, "could not sent common table %d\n", ret);
|
|
goto error;
|
|
}
|
|
|
|
mode = v4l2_find_nearest_size(imx214_modes,
|
|
ARRAY_SIZE(imx214_modes), width, height,
|
|
imx214->fmt.width, imx214->fmt.height);
|
|
ret = imx214_write_table(imx214, mode->reg_table);
|
|
if (ret < 0) {
|
|
dev_err(imx214->dev, "could not sent mode table %d\n", ret);
|
|
goto error;
|
|
}
|
|
ret = __v4l2_ctrl_handler_setup(&imx214->ctrls);
|
|
if (ret < 0) {
|
|
dev_err(imx214->dev, "could not sync v4l2 controls\n");
|
|
goto error;
|
|
}
|
|
ret = regmap_write(imx214->regmap, 0x100, 1);
|
|
if (ret < 0) {
|
|
dev_err(imx214->dev, "could not sent start table %d\n", ret);
|
|
goto error;
|
|
}
|
|
|
|
mutex_unlock(&imx214->mutex);
|
|
return 0;
|
|
|
|
error:
|
|
mutex_unlock(&imx214->mutex);
|
|
return ret;
|
|
}
|
|
|
|
static int imx214_stop_streaming(struct imx214 *imx214)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_write(imx214->regmap, 0x100, 0);
|
|
if (ret < 0)
|
|
dev_err(imx214->dev, "could not sent stop table %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int imx214_s_stream(struct v4l2_subdev *subdev, int enable)
|
|
{
|
|
struct imx214 *imx214 = to_imx214(subdev);
|
|
int ret;
|
|
|
|
if (enable) {
|
|
ret = pm_runtime_resume_and_get(imx214->dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = imx214_start_streaming(imx214);
|
|
if (ret < 0)
|
|
goto err_rpm_put;
|
|
} else {
|
|
ret = imx214_stop_streaming(imx214);
|
|
if (ret < 0)
|
|
goto err_rpm_put;
|
|
pm_runtime_put(imx214->dev);
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_rpm_put:
|
|
pm_runtime_put(imx214->dev);
|
|
return ret;
|
|
}
|
|
|
|
static int imx214_g_frame_interval(struct v4l2_subdev *subdev,
|
|
struct v4l2_subdev_frame_interval *fival)
|
|
{
|
|
fival->interval.numerator = 1;
|
|
fival->interval.denominator = IMX214_FPS;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx214_enum_frame_interval(struct v4l2_subdev *subdev,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_frame_interval_enum *fie)
|
|
{
|
|
const struct imx214_mode *mode;
|
|
|
|
if (fie->index != 0)
|
|
return -EINVAL;
|
|
|
|
mode = v4l2_find_nearest_size(imx214_modes,
|
|
ARRAY_SIZE(imx214_modes), width, height,
|
|
fie->width, fie->height);
|
|
|
|
fie->code = IMX214_MBUS_CODE;
|
|
fie->width = mode->width;
|
|
fie->height = mode->height;
|
|
fie->interval.numerator = 1;
|
|
fie->interval.denominator = IMX214_FPS;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct v4l2_subdev_video_ops imx214_video_ops = {
|
|
.s_stream = imx214_s_stream,
|
|
.g_frame_interval = imx214_g_frame_interval,
|
|
.s_frame_interval = imx214_g_frame_interval,
|
|
};
|
|
|
|
static const struct v4l2_subdev_pad_ops imx214_subdev_pad_ops = {
|
|
.enum_mbus_code = imx214_enum_mbus_code,
|
|
.enum_frame_size = imx214_enum_frame_size,
|
|
.enum_frame_interval = imx214_enum_frame_interval,
|
|
.get_fmt = imx214_get_format,
|
|
.set_fmt = imx214_set_format,
|
|
.get_selection = imx214_get_selection,
|
|
.init_cfg = imx214_entity_init_cfg,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops imx214_subdev_ops = {
|
|
.core = &imx214_core_ops,
|
|
.video = &imx214_video_ops,
|
|
.pad = &imx214_subdev_pad_ops,
|
|
};
|
|
|
|
static const struct regmap_config sensor_regmap_config = {
|
|
.reg_bits = 16,
|
|
.val_bits = 8,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
};
|
|
|
|
static int imx214_get_regulators(struct device *dev, struct imx214 *imx214)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < IMX214_NUM_SUPPLIES; i++)
|
|
imx214->supplies[i].supply = imx214_supply_name[i];
|
|
|
|
return devm_regulator_bulk_get(dev, IMX214_NUM_SUPPLIES,
|
|
imx214->supplies);
|
|
}
|
|
|
|
static int imx214_parse_fwnode(struct device *dev)
|
|
{
|
|
struct fwnode_handle *endpoint;
|
|
struct v4l2_fwnode_endpoint bus_cfg = {
|
|
.bus_type = V4L2_MBUS_CSI2_DPHY,
|
|
};
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL);
|
|
if (!endpoint) {
|
|
dev_err(dev, "endpoint node not found\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = v4l2_fwnode_endpoint_alloc_parse(endpoint, &bus_cfg);
|
|
if (ret) {
|
|
dev_err(dev, "parsing endpoint node failed\n");
|
|
goto done;
|
|
}
|
|
|
|
for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++)
|
|
if (bus_cfg.link_frequencies[i] == IMX214_DEFAULT_LINK_FREQ)
|
|
break;
|
|
|
|
if (i == bus_cfg.nr_of_link_frequencies) {
|
|
dev_err(dev, "link-frequencies %d not supported, Please review your DT\n",
|
|
IMX214_DEFAULT_LINK_FREQ);
|
|
ret = -EINVAL;
|
|
goto done;
|
|
}
|
|
|
|
done:
|
|
v4l2_fwnode_endpoint_free(&bus_cfg);
|
|
fwnode_handle_put(endpoint);
|
|
return ret;
|
|
}
|
|
|
|
static int imx214_probe(struct i2c_client *client)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct imx214 *imx214;
|
|
static const s64 link_freq[] = {
|
|
IMX214_DEFAULT_LINK_FREQ,
|
|
};
|
|
static const struct v4l2_area unit_size = {
|
|
.width = 1120,
|
|
.height = 1120,
|
|
};
|
|
int ret;
|
|
|
|
ret = imx214_parse_fwnode(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
imx214 = devm_kzalloc(dev, sizeof(*imx214), GFP_KERNEL);
|
|
if (!imx214)
|
|
return -ENOMEM;
|
|
|
|
imx214->dev = dev;
|
|
|
|
imx214->xclk = devm_clk_get(dev, NULL);
|
|
if (IS_ERR(imx214->xclk)) {
|
|
dev_err(dev, "could not get xclk");
|
|
return PTR_ERR(imx214->xclk);
|
|
}
|
|
|
|
ret = clk_set_rate(imx214->xclk, IMX214_DEFAULT_CLK_FREQ);
|
|
if (ret) {
|
|
dev_err(dev, "could not set xclk frequency\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = imx214_get_regulators(dev, imx214);
|
|
if (ret < 0) {
|
|
dev_err(dev, "cannot get regulators\n");
|
|
return ret;
|
|
}
|
|
|
|
imx214->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
|
|
if (IS_ERR(imx214->enable_gpio)) {
|
|
dev_err(dev, "cannot get enable gpio\n");
|
|
return PTR_ERR(imx214->enable_gpio);
|
|
}
|
|
|
|
imx214->regmap = devm_regmap_init_i2c(client, &sensor_regmap_config);
|
|
if (IS_ERR(imx214->regmap)) {
|
|
dev_err(dev, "regmap init failed\n");
|
|
return PTR_ERR(imx214->regmap);
|
|
}
|
|
|
|
v4l2_i2c_subdev_init(&imx214->sd, client, &imx214_subdev_ops);
|
|
|
|
/*
|
|
* Enable power initially, to avoid warnings
|
|
* from clk_disable on power_off
|
|
*/
|
|
imx214_power_on(imx214->dev);
|
|
|
|
pm_runtime_set_active(imx214->dev);
|
|
pm_runtime_enable(imx214->dev);
|
|
pm_runtime_idle(imx214->dev);
|
|
|
|
v4l2_ctrl_handler_init(&imx214->ctrls, 3);
|
|
|
|
imx214->pixel_rate = v4l2_ctrl_new_std(&imx214->ctrls, NULL,
|
|
V4L2_CID_PIXEL_RATE, 0,
|
|
IMX214_DEFAULT_PIXEL_RATE, 1,
|
|
IMX214_DEFAULT_PIXEL_RATE);
|
|
imx214->link_freq = v4l2_ctrl_new_int_menu(&imx214->ctrls, NULL,
|
|
V4L2_CID_LINK_FREQ,
|
|
ARRAY_SIZE(link_freq) - 1,
|
|
0, link_freq);
|
|
if (imx214->link_freq)
|
|
imx214->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
|
|
/*
|
|
* WARNING!
|
|
* Values obtained reverse engineering blobs and/or devices.
|
|
* Ranges and functionality might be wrong.
|
|
*
|
|
* Sony, please release some register set documentation for the
|
|
* device.
|
|
*
|
|
* Yours sincerely, Ricardo.
|
|
*/
|
|
imx214->exposure = v4l2_ctrl_new_std(&imx214->ctrls, &imx214_ctrl_ops,
|
|
V4L2_CID_EXPOSURE,
|
|
0, 3184, 1, 0x0c70);
|
|
|
|
imx214->unit_size = v4l2_ctrl_new_std_compound(&imx214->ctrls,
|
|
NULL,
|
|
V4L2_CID_UNIT_CELL_SIZE,
|
|
v4l2_ctrl_ptr_create((void *)&unit_size));
|
|
ret = imx214->ctrls.error;
|
|
if (ret) {
|
|
dev_err(&client->dev, "%s control init failed (%d)\n",
|
|
__func__, ret);
|
|
goto free_ctrl;
|
|
}
|
|
|
|
imx214->sd.ctrl_handler = &imx214->ctrls;
|
|
mutex_init(&imx214->mutex);
|
|
imx214->ctrls.lock = &imx214->mutex;
|
|
|
|
imx214->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
|
|
imx214->pad.flags = MEDIA_PAD_FL_SOURCE;
|
|
imx214->sd.dev = &client->dev;
|
|
imx214->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
|
|
|
|
ret = media_entity_pads_init(&imx214->sd.entity, 1, &imx214->pad);
|
|
if (ret < 0) {
|
|
dev_err(dev, "could not register media entity\n");
|
|
goto free_ctrl;
|
|
}
|
|
|
|
imx214_entity_init_cfg(&imx214->sd, NULL);
|
|
|
|
ret = v4l2_async_register_subdev_sensor(&imx214->sd);
|
|
if (ret < 0) {
|
|
dev_err(dev, "could not register v4l2 device\n");
|
|
goto free_entity;
|
|
}
|
|
|
|
return 0;
|
|
|
|
free_entity:
|
|
media_entity_cleanup(&imx214->sd.entity);
|
|
free_ctrl:
|
|
mutex_destroy(&imx214->mutex);
|
|
v4l2_ctrl_handler_free(&imx214->ctrls);
|
|
pm_runtime_disable(imx214->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void imx214_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct imx214 *imx214 = to_imx214(sd);
|
|
|
|
v4l2_async_unregister_subdev(&imx214->sd);
|
|
media_entity_cleanup(&imx214->sd.entity);
|
|
v4l2_ctrl_handler_free(&imx214->ctrls);
|
|
|
|
pm_runtime_disable(&client->dev);
|
|
pm_runtime_set_suspended(&client->dev);
|
|
|
|
mutex_destroy(&imx214->mutex);
|
|
}
|
|
|
|
static const struct of_device_id imx214_of_match[] = {
|
|
{ .compatible = "sony,imx214" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, imx214_of_match);
|
|
|
|
static const struct dev_pm_ops imx214_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(imx214_power_off, imx214_power_on, NULL)
|
|
};
|
|
|
|
static struct i2c_driver imx214_i2c_driver = {
|
|
.driver = {
|
|
.of_match_table = imx214_of_match,
|
|
.pm = &imx214_pm_ops,
|
|
.name = "imx214",
|
|
},
|
|
.probe = imx214_probe,
|
|
.remove = imx214_remove,
|
|
};
|
|
|
|
module_i2c_driver(imx214_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("Sony IMX214 Camera driver");
|
|
MODULE_AUTHOR("Ricardo Ribalda <ribalda@kernel.org>");
|
|
MODULE_LICENSE("GPL v2");
|