linux/drivers/gpu/drm/omapdrm/omap_drv.c
Javier Martinez Canillas 7fd7d70181
drm/omap: Add support for the nomodeset kernel parameter
According to disable Documentation/admin-guide/kernel-parameters.txt, this
parameter can be used to disable kernel modesetting.

DRM drivers will not perform display-mode changes or accelerated rendering
and only the system framebuffer will be available if it was set-up.

But only a few DRM drivers currently check for nomodeset, make this driver
to also support the command line parameter.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-31-javierm@redhat.com
2022-01-27 19:15:49 +01:00

952 lines
23 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
* Author: Rob Clark <rob@ti.com>
*/
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/sort.h>
#include <linux/sys_soc.h>
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_bridge.h>
#include <drm/drm_bridge_connector.h>
#include <drm/drm_drv.h>
#include <drm/drm_fb_helper.h>
#include <drm/drm_file.h>
#include <drm/drm_ioctl.h>
#include <drm/drm_panel.h>
#include <drm/drm_prime.h>
#include <drm/drm_probe_helper.h>
#include <drm/drm_vblank.h>
#include "omap_dmm_tiler.h"
#include "omap_drv.h"
#define DRIVER_NAME MODULE_NAME
#define DRIVER_DESC "OMAP DRM"
#define DRIVER_DATE "20110917"
#define DRIVER_MAJOR 1
#define DRIVER_MINOR 0
#define DRIVER_PATCHLEVEL 0
/*
* mode config funcs
*/
/* Notes about mapping DSS and DRM entities:
* CRTC: overlay
* encoder: manager.. with some extension to allow one primary CRTC
* and zero or more video CRTC's to be mapped to one encoder?
* connector: dssdev.. manager can be attached/detached from different
* devices
*/
static void omap_atomic_wait_for_completion(struct drm_device *dev,
struct drm_atomic_state *old_state)
{
struct drm_crtc_state *new_crtc_state;
struct drm_crtc *crtc;
unsigned int i;
int ret;
for_each_new_crtc_in_state(old_state, crtc, new_crtc_state, i) {
if (!new_crtc_state->active)
continue;
ret = omap_crtc_wait_pending(crtc);
if (!ret)
dev_warn(dev->dev,
"atomic complete timeout (pipe %u)!\n", i);
}
}
static void omap_atomic_commit_tail(struct drm_atomic_state *old_state)
{
struct drm_device *dev = old_state->dev;
struct omap_drm_private *priv = dev->dev_private;
bool fence_cookie = dma_fence_begin_signalling();
dispc_runtime_get(priv->dispc);
/* Apply the atomic update. */
drm_atomic_helper_commit_modeset_disables(dev, old_state);
if (priv->omaprev != 0x3430) {
/* With the current dss dispc implementation we have to enable
* the new modeset before we can commit planes. The dispc ovl
* configuration relies on the video mode configuration been
* written into the HW when the ovl configuration is
* calculated.
*
* This approach is not ideal because after a mode change the
* plane update is executed only after the first vblank
* interrupt. The dispc implementation should be fixed so that
* it is able use uncommitted drm state information.
*/
drm_atomic_helper_commit_modeset_enables(dev, old_state);
omap_atomic_wait_for_completion(dev, old_state);
drm_atomic_helper_commit_planes(dev, old_state, 0);
} else {
/*
* OMAP3 DSS seems to have issues with the work-around above,
* resulting in endless sync losts if a crtc is enabled without
* a plane. For now, skip the WA for OMAP3.
*/
drm_atomic_helper_commit_planes(dev, old_state, 0);
drm_atomic_helper_commit_modeset_enables(dev, old_state);
}
drm_atomic_helper_commit_hw_done(old_state);
dma_fence_end_signalling(fence_cookie);
/*
* Wait for completion of the page flips to ensure that old buffers
* can't be touched by the hardware anymore before cleaning up planes.
*/
omap_atomic_wait_for_completion(dev, old_state);
drm_atomic_helper_cleanup_planes(dev, old_state);
dispc_runtime_put(priv->dispc);
}
static int drm_atomic_state_normalized_zpos_cmp(const void *a, const void *b)
{
const struct drm_plane_state *sa = *(struct drm_plane_state **)a;
const struct drm_plane_state *sb = *(struct drm_plane_state **)b;
if (sa->normalized_zpos != sb->normalized_zpos)
return sa->normalized_zpos - sb->normalized_zpos;
else
return sa->plane->base.id - sb->plane->base.id;
}
/*
* This replaces the drm_atomic_normalize_zpos to handle the dual overlay case.
*
* Since both halves need to be 'appear' side by side the zpos is
* recalculated when dealing with dual overlay cases so that the other
* planes zpos is consistent.
*/
static int omap_atomic_update_normalize_zpos(struct drm_device *dev,
struct drm_atomic_state *state)
{
struct drm_crtc *crtc;
struct drm_crtc_state *old_state, *new_state;
struct drm_plane *plane;
int c, i, n, inc;
int total_planes = dev->mode_config.num_total_plane;
struct drm_plane_state **states;
int ret = 0;
states = kmalloc_array(total_planes, sizeof(*states), GFP_KERNEL);
if (!states)
return -ENOMEM;
for_each_oldnew_crtc_in_state(state, crtc, old_state, new_state, c) {
if (old_state->plane_mask == new_state->plane_mask &&
!new_state->zpos_changed)
continue;
/* Reset plane increment and index value for every crtc */
n = 0;
/*
* Normalization process might create new states for planes
* which normalized_zpos has to be recalculated.
*/
drm_for_each_plane_mask(plane, dev, new_state->plane_mask) {
struct drm_plane_state *plane_state =
drm_atomic_get_plane_state(new_state->state,
plane);
if (IS_ERR(plane_state)) {
ret = PTR_ERR(plane_state);
goto done;
}
states[n++] = plane_state;
}
sort(states, n, sizeof(*states),
drm_atomic_state_normalized_zpos_cmp, NULL);
for (i = 0, inc = 0; i < n; i++) {
plane = states[i]->plane;
states[i]->normalized_zpos = i + inc;
DRM_DEBUG_ATOMIC("[PLANE:%d:%s] updated normalized zpos value %d\n",
plane->base.id, plane->name,
states[i]->normalized_zpos);
if (is_omap_plane_dual_overlay(states[i]))
inc++;
}
new_state->zpos_changed = true;
}
done:
kfree(states);
return ret;
}
static int omap_atomic_check(struct drm_device *dev,
struct drm_atomic_state *state)
{
int ret;
ret = drm_atomic_helper_check(dev, state);
if (ret)
return ret;
if (dev->mode_config.normalize_zpos) {
ret = omap_atomic_update_normalize_zpos(dev, state);
if (ret)
return ret;
}
return 0;
}
static const struct drm_mode_config_helper_funcs omap_mode_config_helper_funcs = {
.atomic_commit_tail = omap_atomic_commit_tail,
};
static const struct drm_mode_config_funcs omap_mode_config_funcs = {
.fb_create = omap_framebuffer_create,
.output_poll_changed = drm_fb_helper_output_poll_changed,
.atomic_check = omap_atomic_check,
.atomic_commit = drm_atomic_helper_commit,
};
/* Global/shared object state funcs */
/*
* This is a helper that returns the private state currently in operation.
* Note that this would return the "old_state" if called in the atomic check
* path, and the "new_state" after the atomic swap has been done.
*/
struct omap_global_state *
omap_get_existing_global_state(struct omap_drm_private *priv)
{
return to_omap_global_state(priv->glob_obj.state);
}
/*
* This acquires the modeset lock set aside for global state, creates
* a new duplicated private object state.
*/
struct omap_global_state *__must_check
omap_get_global_state(struct drm_atomic_state *s)
{
struct omap_drm_private *priv = s->dev->dev_private;
struct drm_private_state *priv_state;
priv_state = drm_atomic_get_private_obj_state(s, &priv->glob_obj);
if (IS_ERR(priv_state))
return ERR_CAST(priv_state);
return to_omap_global_state(priv_state);
}
static struct drm_private_state *
omap_global_duplicate_state(struct drm_private_obj *obj)
{
struct omap_global_state *state;
state = kmemdup(obj->state, sizeof(*state), GFP_KERNEL);
if (!state)
return NULL;
__drm_atomic_helper_private_obj_duplicate_state(obj, &state->base);
return &state->base;
}
static void omap_global_destroy_state(struct drm_private_obj *obj,
struct drm_private_state *state)
{
struct omap_global_state *omap_state = to_omap_global_state(state);
kfree(omap_state);
}
static const struct drm_private_state_funcs omap_global_state_funcs = {
.atomic_duplicate_state = omap_global_duplicate_state,
.atomic_destroy_state = omap_global_destroy_state,
};
static int omap_global_obj_init(struct drm_device *dev)
{
struct omap_drm_private *priv = dev->dev_private;
struct omap_global_state *state;
state = kzalloc(sizeof(*state), GFP_KERNEL);
if (!state)
return -ENOMEM;
drm_atomic_private_obj_init(dev, &priv->glob_obj, &state->base,
&omap_global_state_funcs);
return 0;
}
static void omap_global_obj_fini(struct omap_drm_private *priv)
{
drm_atomic_private_obj_fini(&priv->glob_obj);
}
static void omap_disconnect_pipelines(struct drm_device *ddev)
{
struct omap_drm_private *priv = ddev->dev_private;
unsigned int i;
for (i = 0; i < priv->num_pipes; i++) {
struct omap_drm_pipeline *pipe = &priv->pipes[i];
omapdss_device_disconnect(NULL, pipe->output);
omapdss_device_put(pipe->output);
pipe->output = NULL;
}
memset(&priv->channels, 0, sizeof(priv->channels));
priv->num_pipes = 0;
}
static int omap_connect_pipelines(struct drm_device *ddev)
{
struct omap_drm_private *priv = ddev->dev_private;
struct omap_dss_device *output = NULL;
int r;
for_each_dss_output(output) {
r = omapdss_device_connect(priv->dss, NULL, output);
if (r == -EPROBE_DEFER) {
omapdss_device_put(output);
return r;
} else if (r) {
dev_warn(output->dev, "could not connect output %s\n",
output->name);
} else {
struct omap_drm_pipeline *pipe;
pipe = &priv->pipes[priv->num_pipes++];
pipe->output = omapdss_device_get(output);
if (priv->num_pipes == ARRAY_SIZE(priv->pipes)) {
/* To balance the 'for_each_dss_output' loop */
omapdss_device_put(output);
break;
}
}
}
return 0;
}
static int omap_compare_pipelines(const void *a, const void *b)
{
const struct omap_drm_pipeline *pipe1 = a;
const struct omap_drm_pipeline *pipe2 = b;
if (pipe1->alias_id > pipe2->alias_id)
return 1;
else if (pipe1->alias_id < pipe2->alias_id)
return -1;
return 0;
}
static int omap_modeset_init_properties(struct drm_device *dev)
{
struct omap_drm_private *priv = dev->dev_private;
unsigned int num_planes = dispc_get_num_ovls(priv->dispc);
priv->zorder_prop = drm_property_create_range(dev, 0, "zorder", 0,
num_planes - 1);
if (!priv->zorder_prop)
return -ENOMEM;
return 0;
}
static int omap_display_id(struct omap_dss_device *output)
{
struct device_node *node = NULL;
if (output->bridge) {
struct drm_bridge *bridge = output->bridge;
while (drm_bridge_get_next_bridge(bridge))
bridge = drm_bridge_get_next_bridge(bridge);
node = bridge->of_node;
}
return node ? of_alias_get_id(node, "display") : -ENODEV;
}
static int omap_modeset_init(struct drm_device *dev)
{
struct omap_drm_private *priv = dev->dev_private;
int num_ovls = dispc_get_num_ovls(priv->dispc);
int num_mgrs = dispc_get_num_mgrs(priv->dispc);
unsigned int i;
int ret;
u32 plane_crtc_mask;
if (!omapdss_stack_is_ready())
return -EPROBE_DEFER;
ret = omap_modeset_init_properties(dev);
if (ret < 0)
return ret;
/*
* This function creates exactly one connector, encoder, crtc,
* and primary plane per each connected dss-device. Each
* connector->encoder->crtc chain is expected to be separate
* and each crtc is connect to a single dss-channel. If the
* configuration does not match the expectations or exceeds
* the available resources, the configuration is rejected.
*/
ret = omap_connect_pipelines(dev);
if (ret < 0)
return ret;
if (priv->num_pipes > num_mgrs || priv->num_pipes > num_ovls) {
dev_err(dev->dev, "%s(): Too many connected displays\n",
__func__);
return -EINVAL;
}
/* Create all planes first. They can all be put to any CRTC. */
plane_crtc_mask = (1 << priv->num_pipes) - 1;
for (i = 0; i < num_ovls; i++) {
enum drm_plane_type type = i < priv->num_pipes
? DRM_PLANE_TYPE_PRIMARY
: DRM_PLANE_TYPE_OVERLAY;
struct drm_plane *plane;
if (WARN_ON(priv->num_planes >= ARRAY_SIZE(priv->planes)))
return -EINVAL;
plane = omap_plane_init(dev, i, type, plane_crtc_mask);
if (IS_ERR(plane))
return PTR_ERR(plane);
priv->planes[priv->num_planes++] = plane;
}
/*
* Create the encoders, attach the bridges and get the pipeline alias
* IDs.
*/
for (i = 0; i < priv->num_pipes; i++) {
struct omap_drm_pipeline *pipe = &priv->pipes[i];
int id;
pipe->encoder = omap_encoder_init(dev, pipe->output);
if (!pipe->encoder)
return -ENOMEM;
if (pipe->output->bridge) {
ret = drm_bridge_attach(pipe->encoder,
pipe->output->bridge, NULL,
DRM_BRIDGE_ATTACH_NO_CONNECTOR);
if (ret < 0)
return ret;
}
id = omap_display_id(pipe->output);
pipe->alias_id = id >= 0 ? id : i;
}
/* Sort the pipelines by DT aliases. */
sort(priv->pipes, priv->num_pipes, sizeof(priv->pipes[0]),
omap_compare_pipelines, NULL);
/*
* Populate the pipeline lookup table by DISPC channel. Only one display
* is allowed per channel.
*/
for (i = 0; i < priv->num_pipes; ++i) {
struct omap_drm_pipeline *pipe = &priv->pipes[i];
enum omap_channel channel = pipe->output->dispc_channel;
if (WARN_ON(priv->channels[channel] != NULL))
return -EINVAL;
priv->channels[channel] = pipe;
}
/* Create the connectors and CRTCs. */
for (i = 0; i < priv->num_pipes; i++) {
struct omap_drm_pipeline *pipe = &priv->pipes[i];
struct drm_encoder *encoder = pipe->encoder;
struct drm_crtc *crtc;
pipe->connector = drm_bridge_connector_init(dev, encoder);
if (IS_ERR(pipe->connector)) {
dev_err(priv->dev,
"unable to create bridge connector for %s\n",
pipe->output->name);
return PTR_ERR(pipe->connector);
}
drm_connector_attach_encoder(pipe->connector, encoder);
crtc = omap_crtc_init(dev, pipe, priv->planes[i]);
if (IS_ERR(crtc))
return PTR_ERR(crtc);
encoder->possible_crtcs = 1 << i;
pipe->crtc = crtc;
}
DBG("registered %u planes, %u crtcs/encoders/connectors\n",
priv->num_planes, priv->num_pipes);
dev->mode_config.min_width = 8;
dev->mode_config.min_height = 2;
/*
* Note: these values are used for multiple independent things:
* connector mode filtering, buffer sizes, crtc sizes...
* Use big enough values here to cover all use cases, and do more
* specific checking in the respective code paths.
*/
dev->mode_config.max_width = 8192;
dev->mode_config.max_height = 8192;
/* We want the zpos to be normalized */
dev->mode_config.normalize_zpos = true;
dev->mode_config.funcs = &omap_mode_config_funcs;
dev->mode_config.helper_private = &omap_mode_config_helper_funcs;
drm_mode_config_reset(dev);
omap_drm_irq_install(dev);
return 0;
}
static void omap_modeset_fini(struct drm_device *ddev)
{
omap_drm_irq_uninstall(ddev);
drm_mode_config_cleanup(ddev);
}
/*
* Enable the HPD in external components if supported
*/
static void omap_modeset_enable_external_hpd(struct drm_device *ddev)
{
struct omap_drm_private *priv = ddev->dev_private;
unsigned int i;
for (i = 0; i < priv->num_pipes; i++) {
struct drm_connector *connector = priv->pipes[i].connector;
if (!connector)
continue;
if (priv->pipes[i].output->bridge)
drm_bridge_connector_enable_hpd(connector);
}
}
/*
* Disable the HPD in external components if supported
*/
static void omap_modeset_disable_external_hpd(struct drm_device *ddev)
{
struct omap_drm_private *priv = ddev->dev_private;
unsigned int i;
for (i = 0; i < priv->num_pipes; i++) {
struct drm_connector *connector = priv->pipes[i].connector;
if (!connector)
continue;
if (priv->pipes[i].output->bridge)
drm_bridge_connector_disable_hpd(connector);
}
}
/*
* drm ioctl funcs
*/
static int ioctl_get_param(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct omap_drm_private *priv = dev->dev_private;
struct drm_omap_param *args = data;
DBG("%p: param=%llu", dev, args->param);
switch (args->param) {
case OMAP_PARAM_CHIPSET_ID:
args->value = priv->omaprev;
break;
default:
DBG("unknown parameter %lld", args->param);
return -EINVAL;
}
return 0;
}
#define OMAP_BO_USER_MASK 0x00ffffff /* flags settable by userspace */
static int ioctl_gem_new(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_omap_gem_new *args = data;
u32 flags = args->flags & OMAP_BO_USER_MASK;
VERB("%p:%p: size=0x%08x, flags=%08x", dev, file_priv,
args->size.bytes, flags);
return omap_gem_new_handle(dev, file_priv, args->size, flags,
&args->handle);
}
static int ioctl_gem_info(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_omap_gem_info *args = data;
struct drm_gem_object *obj;
int ret = 0;
VERB("%p:%p: handle=%d", dev, file_priv, args->handle);
obj = drm_gem_object_lookup(file_priv, args->handle);
if (!obj)
return -ENOENT;
args->size = omap_gem_mmap_size(obj);
args->offset = omap_gem_mmap_offset(obj);
drm_gem_object_put(obj);
return ret;
}
static const struct drm_ioctl_desc ioctls[DRM_COMMAND_END - DRM_COMMAND_BASE] = {
DRM_IOCTL_DEF_DRV(OMAP_GET_PARAM, ioctl_get_param,
DRM_RENDER_ALLOW),
DRM_IOCTL_DEF_DRV(OMAP_SET_PARAM, drm_invalid_op,
DRM_AUTH | DRM_MASTER | DRM_ROOT_ONLY),
DRM_IOCTL_DEF_DRV(OMAP_GEM_NEW, ioctl_gem_new,
DRM_RENDER_ALLOW),
/* Deprecated, to be removed. */
DRM_IOCTL_DEF_DRV(OMAP_GEM_CPU_PREP, drm_noop,
DRM_RENDER_ALLOW),
/* Deprecated, to be removed. */
DRM_IOCTL_DEF_DRV(OMAP_GEM_CPU_FINI, drm_noop,
DRM_RENDER_ALLOW),
DRM_IOCTL_DEF_DRV(OMAP_GEM_INFO, ioctl_gem_info,
DRM_RENDER_ALLOW),
};
/*
* drm driver funcs
*/
static int dev_open(struct drm_device *dev, struct drm_file *file)
{
file->driver_priv = NULL;
DBG("open: dev=%p, file=%p", dev, file);
return 0;
}
static const struct file_operations omapdriver_fops = {
.owner = THIS_MODULE,
.open = drm_open,
.unlocked_ioctl = drm_ioctl,
.compat_ioctl = drm_compat_ioctl,
.release = drm_release,
.mmap = omap_gem_mmap,
.poll = drm_poll,
.read = drm_read,
.llseek = noop_llseek,
};
static const struct drm_driver omap_drm_driver = {
.driver_features = DRIVER_MODESET | DRIVER_GEM |
DRIVER_ATOMIC | DRIVER_RENDER,
.open = dev_open,
.lastclose = drm_fb_helper_lastclose,
#ifdef CONFIG_DEBUG_FS
.debugfs_init = omap_debugfs_init,
#endif
.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
.gem_prime_import = omap_gem_prime_import,
.dumb_create = omap_gem_dumb_create,
.dumb_map_offset = omap_gem_dumb_map_offset,
.ioctls = ioctls,
.num_ioctls = DRM_OMAP_NUM_IOCTLS,
.fops = &omapdriver_fops,
.name = DRIVER_NAME,
.desc = DRIVER_DESC,
.date = DRIVER_DATE,
.major = DRIVER_MAJOR,
.minor = DRIVER_MINOR,
.patchlevel = DRIVER_PATCHLEVEL,
};
static const struct soc_device_attribute omapdrm_soc_devices[] = {
{ .family = "OMAP3", .data = (void *)0x3430 },
{ .family = "OMAP4", .data = (void *)0x4430 },
{ .family = "OMAP5", .data = (void *)0x5430 },
{ .family = "DRA7", .data = (void *)0x0752 },
{ /* sentinel */ }
};
static int omapdrm_init(struct omap_drm_private *priv, struct device *dev)
{
const struct soc_device_attribute *soc;
struct dss_pdata *pdata = dev->platform_data;
struct drm_device *ddev;
int ret;
DBG("%s", dev_name(dev));
if (drm_firmware_drivers_only())
return -ENODEV;
/* Allocate and initialize the DRM device. */
ddev = drm_dev_alloc(&omap_drm_driver, dev);
if (IS_ERR(ddev))
return PTR_ERR(ddev);
priv->ddev = ddev;
ddev->dev_private = priv;
priv->dev = dev;
priv->dss = pdata->dss;
priv->dispc = dispc_get_dispc(priv->dss);
priv->dss->mgr_ops_priv = priv;
soc = soc_device_match(omapdrm_soc_devices);
priv->omaprev = soc ? (uintptr_t)soc->data : 0;
priv->wq = alloc_ordered_workqueue("omapdrm", 0);
mutex_init(&priv->list_lock);
INIT_LIST_HEAD(&priv->obj_list);
/* Get memory bandwidth limits */
priv->max_bandwidth = dispc_get_memory_bandwidth_limit(priv->dispc);
omap_gem_init(ddev);
drm_mode_config_init(ddev);
ret = omap_global_obj_init(ddev);
if (ret)
goto err_gem_deinit;
ret = omap_hwoverlays_init(priv);
if (ret)
goto err_free_priv_obj;
ret = omap_modeset_init(ddev);
if (ret) {
dev_err(priv->dev, "omap_modeset_init failed: ret=%d\n", ret);
goto err_free_overlays;
}
/* Initialize vblank handling, start with all CRTCs disabled. */
ret = drm_vblank_init(ddev, priv->num_pipes);
if (ret) {
dev_err(priv->dev, "could not init vblank\n");
goto err_cleanup_modeset;
}
omap_fbdev_init(ddev);
drm_kms_helper_poll_init(ddev);
omap_modeset_enable_external_hpd(ddev);
/*
* Register the DRM device with the core and the connectors with
* sysfs.
*/
ret = drm_dev_register(ddev, 0);
if (ret)
goto err_cleanup_helpers;
return 0;
err_cleanup_helpers:
omap_modeset_disable_external_hpd(ddev);
drm_kms_helper_poll_fini(ddev);
omap_fbdev_fini(ddev);
err_cleanup_modeset:
omap_modeset_fini(ddev);
err_free_overlays:
omap_hwoverlays_destroy(priv);
err_free_priv_obj:
omap_global_obj_fini(priv);
err_gem_deinit:
drm_mode_config_cleanup(ddev);
omap_gem_deinit(ddev);
destroy_workqueue(priv->wq);
omap_disconnect_pipelines(ddev);
drm_dev_put(ddev);
return ret;
}
static void omapdrm_cleanup(struct omap_drm_private *priv)
{
struct drm_device *ddev = priv->ddev;
DBG("");
drm_dev_unregister(ddev);
omap_modeset_disable_external_hpd(ddev);
drm_kms_helper_poll_fini(ddev);
omap_fbdev_fini(ddev);
drm_atomic_helper_shutdown(ddev);
omap_modeset_fini(ddev);
omap_hwoverlays_destroy(priv);
omap_global_obj_fini(priv);
drm_mode_config_cleanup(ddev);
omap_gem_deinit(ddev);
destroy_workqueue(priv->wq);
omap_disconnect_pipelines(ddev);
drm_dev_put(ddev);
}
static int pdev_probe(struct platform_device *pdev)
{
struct omap_drm_private *priv;
int ret;
ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
if (ret) {
dev_err(&pdev->dev, "Failed to set the DMA mask\n");
return ret;
}
/* Allocate and initialize the driver private structure. */
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
platform_set_drvdata(pdev, priv);
ret = omapdrm_init(priv, &pdev->dev);
if (ret < 0)
kfree(priv);
return ret;
}
static int pdev_remove(struct platform_device *pdev)
{
struct omap_drm_private *priv = platform_get_drvdata(pdev);
omapdrm_cleanup(priv);
kfree(priv);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int omap_drm_suspend(struct device *dev)
{
struct omap_drm_private *priv = dev_get_drvdata(dev);
struct drm_device *drm_dev = priv->ddev;
return drm_mode_config_helper_suspend(drm_dev);
}
static int omap_drm_resume(struct device *dev)
{
struct omap_drm_private *priv = dev_get_drvdata(dev);
struct drm_device *drm_dev = priv->ddev;
drm_mode_config_helper_resume(drm_dev);
return omap_gem_resume(drm_dev);
}
#endif
static SIMPLE_DEV_PM_OPS(omapdrm_pm_ops, omap_drm_suspend, omap_drm_resume);
static struct platform_driver pdev = {
.driver = {
.name = "omapdrm",
.pm = &omapdrm_pm_ops,
},
.probe = pdev_probe,
.remove = pdev_remove,
};
static struct platform_driver * const drivers[] = {
&omap_dmm_driver,
&pdev,
};
static int __init omap_drm_init(void)
{
int r;
DBG("init");
r = omap_dss_init();
if (r)
return r;
r = platform_register_drivers(drivers, ARRAY_SIZE(drivers));
if (r) {
omap_dss_exit();
return r;
}
return 0;
}
static void __exit omap_drm_fini(void)
{
DBG("fini");
platform_unregister_drivers(drivers, ARRAY_SIZE(drivers));
omap_dss_exit();
}
module_init(omap_drm_init);
module_exit(omap_drm_fini);
MODULE_AUTHOR("Rob Clark <rob@ti.com>");
MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
MODULE_DESCRIPTION("OMAP DRM Display Driver");
MODULE_ALIAS("platform:" DRIVER_NAME);
MODULE_LICENSE("GPL v2");