mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-20 02:34:23 +08:00
cfbeb59c7a
Commit f9c2a0dc42
"mmc: dw_mmc: Fix PIO mode with support of highmem" introduced
a regression since v3.2 making the mmc_test hang on test #13
with a "Data starvation by host timeout" interrupt.
This is because, sg_mapping_iter is used to iterate through the
data which spans on multiple pages. The problem is detected on
unaligned data submission where the code previously checked for
!(sg_next(host->sg)) which is true because we only have a single
scatter/gather list which then expands to multiple pages.
Therefore, the driver incorrectly assumed that this was the last
list item and submitted unaligned data to the mmc device. This
overflowed the FIFO on the device before all the data were written
to it. The code was fixed to only submit unaligned data when we are
handling the last sg_miter item by checking whether we reached
the desired data length or not.
The patch was tested against mmc_test and all the tests passed.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2515 lines
61 KiB
C
2515 lines
61 KiB
C
/*
|
|
* Synopsys DesignWare Multimedia Card Interface driver
|
|
* (Based on NXP driver for lpc 31xx)
|
|
*
|
|
* Copyright (C) 2009 NXP Semiconductors
|
|
* Copyright (C) 2009, 2010 Imagination Technologies Ltd.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/blkdev.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/err.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/stat.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/mmc.h>
|
|
#include <linux/mmc/dw_mmc.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_gpio.h>
|
|
|
|
#include "dw_mmc.h"
|
|
|
|
/* Common flag combinations */
|
|
#define DW_MCI_DATA_ERROR_FLAGS (SDMMC_INT_DTO | SDMMC_INT_DCRC | \
|
|
SDMMC_INT_HTO | SDMMC_INT_SBE | \
|
|
SDMMC_INT_EBE)
|
|
#define DW_MCI_CMD_ERROR_FLAGS (SDMMC_INT_RTO | SDMMC_INT_RCRC | \
|
|
SDMMC_INT_RESP_ERR)
|
|
#define DW_MCI_ERROR_FLAGS (DW_MCI_DATA_ERROR_FLAGS | \
|
|
DW_MCI_CMD_ERROR_FLAGS | SDMMC_INT_HLE)
|
|
#define DW_MCI_SEND_STATUS 1
|
|
#define DW_MCI_RECV_STATUS 2
|
|
#define DW_MCI_DMA_THRESHOLD 16
|
|
|
|
#ifdef CONFIG_MMC_DW_IDMAC
|
|
struct idmac_desc {
|
|
u32 des0; /* Control Descriptor */
|
|
#define IDMAC_DES0_DIC BIT(1)
|
|
#define IDMAC_DES0_LD BIT(2)
|
|
#define IDMAC_DES0_FD BIT(3)
|
|
#define IDMAC_DES0_CH BIT(4)
|
|
#define IDMAC_DES0_ER BIT(5)
|
|
#define IDMAC_DES0_CES BIT(30)
|
|
#define IDMAC_DES0_OWN BIT(31)
|
|
|
|
u32 des1; /* Buffer sizes */
|
|
#define IDMAC_SET_BUFFER1_SIZE(d, s) \
|
|
((d)->des1 = ((d)->des1 & 0x03ffe000) | ((s) & 0x1fff))
|
|
|
|
u32 des2; /* buffer 1 physical address */
|
|
|
|
u32 des3; /* buffer 2 physical address */
|
|
};
|
|
#endif /* CONFIG_MMC_DW_IDMAC */
|
|
|
|
/**
|
|
* struct dw_mci_slot - MMC slot state
|
|
* @mmc: The mmc_host representing this slot.
|
|
* @host: The MMC controller this slot is using.
|
|
* @quirks: Slot-level quirks (DW_MCI_SLOT_QUIRK_XXX)
|
|
* @wp_gpio: If gpio_is_valid() we'll use this to read write protect.
|
|
* @ctype: Card type for this slot.
|
|
* @mrq: mmc_request currently being processed or waiting to be
|
|
* processed, or NULL when the slot is idle.
|
|
* @queue_node: List node for placing this node in the @queue list of
|
|
* &struct dw_mci.
|
|
* @clock: Clock rate configured by set_ios(). Protected by host->lock.
|
|
* @flags: Random state bits associated with the slot.
|
|
* @id: Number of this slot.
|
|
* @last_detect_state: Most recently observed card detect state.
|
|
*/
|
|
struct dw_mci_slot {
|
|
struct mmc_host *mmc;
|
|
struct dw_mci *host;
|
|
|
|
int quirks;
|
|
int wp_gpio;
|
|
|
|
u32 ctype;
|
|
|
|
struct mmc_request *mrq;
|
|
struct list_head queue_node;
|
|
|
|
unsigned int clock;
|
|
unsigned long flags;
|
|
#define DW_MMC_CARD_PRESENT 0
|
|
#define DW_MMC_CARD_NEED_INIT 1
|
|
int id;
|
|
int last_detect_state;
|
|
};
|
|
|
|
#if defined(CONFIG_DEBUG_FS)
|
|
static int dw_mci_req_show(struct seq_file *s, void *v)
|
|
{
|
|
struct dw_mci_slot *slot = s->private;
|
|
struct mmc_request *mrq;
|
|
struct mmc_command *cmd;
|
|
struct mmc_command *stop;
|
|
struct mmc_data *data;
|
|
|
|
/* Make sure we get a consistent snapshot */
|
|
spin_lock_bh(&slot->host->lock);
|
|
mrq = slot->mrq;
|
|
|
|
if (mrq) {
|
|
cmd = mrq->cmd;
|
|
data = mrq->data;
|
|
stop = mrq->stop;
|
|
|
|
if (cmd)
|
|
seq_printf(s,
|
|
"CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
|
|
cmd->opcode, cmd->arg, cmd->flags,
|
|
cmd->resp[0], cmd->resp[1], cmd->resp[2],
|
|
cmd->resp[2], cmd->error);
|
|
if (data)
|
|
seq_printf(s, "DATA %u / %u * %u flg %x err %d\n",
|
|
data->bytes_xfered, data->blocks,
|
|
data->blksz, data->flags, data->error);
|
|
if (stop)
|
|
seq_printf(s,
|
|
"CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
|
|
stop->opcode, stop->arg, stop->flags,
|
|
stop->resp[0], stop->resp[1], stop->resp[2],
|
|
stop->resp[2], stop->error);
|
|
}
|
|
|
|
spin_unlock_bh(&slot->host->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dw_mci_req_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, dw_mci_req_show, inode->i_private);
|
|
}
|
|
|
|
static const struct file_operations dw_mci_req_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = dw_mci_req_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
static int dw_mci_regs_show(struct seq_file *s, void *v)
|
|
{
|
|
seq_printf(s, "STATUS:\t0x%08x\n", SDMMC_STATUS);
|
|
seq_printf(s, "RINTSTS:\t0x%08x\n", SDMMC_RINTSTS);
|
|
seq_printf(s, "CMD:\t0x%08x\n", SDMMC_CMD);
|
|
seq_printf(s, "CTRL:\t0x%08x\n", SDMMC_CTRL);
|
|
seq_printf(s, "INTMASK:\t0x%08x\n", SDMMC_INTMASK);
|
|
seq_printf(s, "CLKENA:\t0x%08x\n", SDMMC_CLKENA);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dw_mci_regs_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, dw_mci_regs_show, inode->i_private);
|
|
}
|
|
|
|
static const struct file_operations dw_mci_regs_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = dw_mci_regs_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
static void dw_mci_init_debugfs(struct dw_mci_slot *slot)
|
|
{
|
|
struct mmc_host *mmc = slot->mmc;
|
|
struct dw_mci *host = slot->host;
|
|
struct dentry *root;
|
|
struct dentry *node;
|
|
|
|
root = mmc->debugfs_root;
|
|
if (!root)
|
|
return;
|
|
|
|
node = debugfs_create_file("regs", S_IRUSR, root, host,
|
|
&dw_mci_regs_fops);
|
|
if (!node)
|
|
goto err;
|
|
|
|
node = debugfs_create_file("req", S_IRUSR, root, slot,
|
|
&dw_mci_req_fops);
|
|
if (!node)
|
|
goto err;
|
|
|
|
node = debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state);
|
|
if (!node)
|
|
goto err;
|
|
|
|
node = debugfs_create_x32("pending_events", S_IRUSR, root,
|
|
(u32 *)&host->pending_events);
|
|
if (!node)
|
|
goto err;
|
|
|
|
node = debugfs_create_x32("completed_events", S_IRUSR, root,
|
|
(u32 *)&host->completed_events);
|
|
if (!node)
|
|
goto err;
|
|
|
|
return;
|
|
|
|
err:
|
|
dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n");
|
|
}
|
|
#endif /* defined(CONFIG_DEBUG_FS) */
|
|
|
|
static void dw_mci_set_timeout(struct dw_mci *host)
|
|
{
|
|
/* timeout (maximum) */
|
|
mci_writel(host, TMOUT, 0xffffffff);
|
|
}
|
|
|
|
static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd)
|
|
{
|
|
struct mmc_data *data;
|
|
struct dw_mci_slot *slot = mmc_priv(mmc);
|
|
const struct dw_mci_drv_data *drv_data = slot->host->drv_data;
|
|
u32 cmdr;
|
|
cmd->error = -EINPROGRESS;
|
|
|
|
cmdr = cmd->opcode;
|
|
|
|
if (cmdr == MMC_STOP_TRANSMISSION)
|
|
cmdr |= SDMMC_CMD_STOP;
|
|
else
|
|
cmdr |= SDMMC_CMD_PRV_DAT_WAIT;
|
|
|
|
if (cmd->flags & MMC_RSP_PRESENT) {
|
|
/* We expect a response, so set this bit */
|
|
cmdr |= SDMMC_CMD_RESP_EXP;
|
|
if (cmd->flags & MMC_RSP_136)
|
|
cmdr |= SDMMC_CMD_RESP_LONG;
|
|
}
|
|
|
|
if (cmd->flags & MMC_RSP_CRC)
|
|
cmdr |= SDMMC_CMD_RESP_CRC;
|
|
|
|
data = cmd->data;
|
|
if (data) {
|
|
cmdr |= SDMMC_CMD_DAT_EXP;
|
|
if (data->flags & MMC_DATA_STREAM)
|
|
cmdr |= SDMMC_CMD_STRM_MODE;
|
|
if (data->flags & MMC_DATA_WRITE)
|
|
cmdr |= SDMMC_CMD_DAT_WR;
|
|
}
|
|
|
|
if (drv_data && drv_data->prepare_command)
|
|
drv_data->prepare_command(slot->host, &cmdr);
|
|
|
|
return cmdr;
|
|
}
|
|
|
|
static void dw_mci_start_command(struct dw_mci *host,
|
|
struct mmc_command *cmd, u32 cmd_flags)
|
|
{
|
|
host->cmd = cmd;
|
|
dev_vdbg(host->dev,
|
|
"start command: ARGR=0x%08x CMDR=0x%08x\n",
|
|
cmd->arg, cmd_flags);
|
|
|
|
mci_writel(host, CMDARG, cmd->arg);
|
|
wmb();
|
|
|
|
mci_writel(host, CMD, cmd_flags | SDMMC_CMD_START);
|
|
}
|
|
|
|
static void send_stop_cmd(struct dw_mci *host, struct mmc_data *data)
|
|
{
|
|
dw_mci_start_command(host, data->stop, host->stop_cmdr);
|
|
}
|
|
|
|
/* DMA interface functions */
|
|
static void dw_mci_stop_dma(struct dw_mci *host)
|
|
{
|
|
if (host->using_dma) {
|
|
host->dma_ops->stop(host);
|
|
host->dma_ops->cleanup(host);
|
|
} else {
|
|
/* Data transfer was stopped by the interrupt handler */
|
|
set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
|
|
}
|
|
}
|
|
|
|
static int dw_mci_get_dma_dir(struct mmc_data *data)
|
|
{
|
|
if (data->flags & MMC_DATA_WRITE)
|
|
return DMA_TO_DEVICE;
|
|
else
|
|
return DMA_FROM_DEVICE;
|
|
}
|
|
|
|
#ifdef CONFIG_MMC_DW_IDMAC
|
|
static void dw_mci_dma_cleanup(struct dw_mci *host)
|
|
{
|
|
struct mmc_data *data = host->data;
|
|
|
|
if (data)
|
|
if (!data->host_cookie)
|
|
dma_unmap_sg(host->dev,
|
|
data->sg,
|
|
data->sg_len,
|
|
dw_mci_get_dma_dir(data));
|
|
}
|
|
|
|
static void dw_mci_idmac_stop_dma(struct dw_mci *host)
|
|
{
|
|
u32 temp;
|
|
|
|
/* Disable and reset the IDMAC interface */
|
|
temp = mci_readl(host, CTRL);
|
|
temp &= ~SDMMC_CTRL_USE_IDMAC;
|
|
temp |= SDMMC_CTRL_DMA_RESET;
|
|
mci_writel(host, CTRL, temp);
|
|
|
|
/* Stop the IDMAC running */
|
|
temp = mci_readl(host, BMOD);
|
|
temp &= ~(SDMMC_IDMAC_ENABLE | SDMMC_IDMAC_FB);
|
|
mci_writel(host, BMOD, temp);
|
|
}
|
|
|
|
static void dw_mci_idmac_complete_dma(struct dw_mci *host)
|
|
{
|
|
struct mmc_data *data = host->data;
|
|
|
|
dev_vdbg(host->dev, "DMA complete\n");
|
|
|
|
host->dma_ops->cleanup(host);
|
|
|
|
/*
|
|
* If the card was removed, data will be NULL. No point in trying to
|
|
* send the stop command or waiting for NBUSY in this case.
|
|
*/
|
|
if (data) {
|
|
set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
|
|
tasklet_schedule(&host->tasklet);
|
|
}
|
|
}
|
|
|
|
static void dw_mci_translate_sglist(struct dw_mci *host, struct mmc_data *data,
|
|
unsigned int sg_len)
|
|
{
|
|
int i;
|
|
struct idmac_desc *desc = host->sg_cpu;
|
|
|
|
for (i = 0; i < sg_len; i++, desc++) {
|
|
unsigned int length = sg_dma_len(&data->sg[i]);
|
|
u32 mem_addr = sg_dma_address(&data->sg[i]);
|
|
|
|
/* Set the OWN bit and disable interrupts for this descriptor */
|
|
desc->des0 = IDMAC_DES0_OWN | IDMAC_DES0_DIC | IDMAC_DES0_CH;
|
|
|
|
/* Buffer length */
|
|
IDMAC_SET_BUFFER1_SIZE(desc, length);
|
|
|
|
/* Physical address to DMA to/from */
|
|
desc->des2 = mem_addr;
|
|
}
|
|
|
|
/* Set first descriptor */
|
|
desc = host->sg_cpu;
|
|
desc->des0 |= IDMAC_DES0_FD;
|
|
|
|
/* Set last descriptor */
|
|
desc = host->sg_cpu + (i - 1) * sizeof(struct idmac_desc);
|
|
desc->des0 &= ~(IDMAC_DES0_CH | IDMAC_DES0_DIC);
|
|
desc->des0 |= IDMAC_DES0_LD;
|
|
|
|
wmb();
|
|
}
|
|
|
|
static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
|
|
{
|
|
u32 temp;
|
|
|
|
dw_mci_translate_sglist(host, host->data, sg_len);
|
|
|
|
/* Select IDMAC interface */
|
|
temp = mci_readl(host, CTRL);
|
|
temp |= SDMMC_CTRL_USE_IDMAC;
|
|
mci_writel(host, CTRL, temp);
|
|
|
|
wmb();
|
|
|
|
/* Enable the IDMAC */
|
|
temp = mci_readl(host, BMOD);
|
|
temp |= SDMMC_IDMAC_ENABLE | SDMMC_IDMAC_FB;
|
|
mci_writel(host, BMOD, temp);
|
|
|
|
/* Start it running */
|
|
mci_writel(host, PLDMND, 1);
|
|
}
|
|
|
|
static int dw_mci_idmac_init(struct dw_mci *host)
|
|
{
|
|
struct idmac_desc *p;
|
|
int i;
|
|
|
|
/* Number of descriptors in the ring buffer */
|
|
host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc);
|
|
|
|
/* Forward link the descriptor list */
|
|
for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++, p++)
|
|
p->des3 = host->sg_dma + (sizeof(struct idmac_desc) * (i + 1));
|
|
|
|
/* Set the last descriptor as the end-of-ring descriptor */
|
|
p->des3 = host->sg_dma;
|
|
p->des0 = IDMAC_DES0_ER;
|
|
|
|
mci_writel(host, BMOD, SDMMC_IDMAC_SWRESET);
|
|
|
|
/* Mask out interrupts - get Tx & Rx complete only */
|
|
mci_writel(host, IDINTEN, SDMMC_IDMAC_INT_NI | SDMMC_IDMAC_INT_RI |
|
|
SDMMC_IDMAC_INT_TI);
|
|
|
|
/* Set the descriptor base address */
|
|
mci_writel(host, DBADDR, host->sg_dma);
|
|
return 0;
|
|
}
|
|
|
|
static const struct dw_mci_dma_ops dw_mci_idmac_ops = {
|
|
.init = dw_mci_idmac_init,
|
|
.start = dw_mci_idmac_start_dma,
|
|
.stop = dw_mci_idmac_stop_dma,
|
|
.complete = dw_mci_idmac_complete_dma,
|
|
.cleanup = dw_mci_dma_cleanup,
|
|
};
|
|
#endif /* CONFIG_MMC_DW_IDMAC */
|
|
|
|
static int dw_mci_pre_dma_transfer(struct dw_mci *host,
|
|
struct mmc_data *data,
|
|
bool next)
|
|
{
|
|
struct scatterlist *sg;
|
|
unsigned int i, sg_len;
|
|
|
|
if (!next && data->host_cookie)
|
|
return data->host_cookie;
|
|
|
|
/*
|
|
* We don't do DMA on "complex" transfers, i.e. with
|
|
* non-word-aligned buffers or lengths. Also, we don't bother
|
|
* with all the DMA setup overhead for short transfers.
|
|
*/
|
|
if (data->blocks * data->blksz < DW_MCI_DMA_THRESHOLD)
|
|
return -EINVAL;
|
|
|
|
if (data->blksz & 3)
|
|
return -EINVAL;
|
|
|
|
for_each_sg(data->sg, sg, data->sg_len, i) {
|
|
if (sg->offset & 3 || sg->length & 3)
|
|
return -EINVAL;
|
|
}
|
|
|
|
sg_len = dma_map_sg(host->dev,
|
|
data->sg,
|
|
data->sg_len,
|
|
dw_mci_get_dma_dir(data));
|
|
if (sg_len == 0)
|
|
return -EINVAL;
|
|
|
|
if (next)
|
|
data->host_cookie = sg_len;
|
|
|
|
return sg_len;
|
|
}
|
|
|
|
static void dw_mci_pre_req(struct mmc_host *mmc,
|
|
struct mmc_request *mrq,
|
|
bool is_first_req)
|
|
{
|
|
struct dw_mci_slot *slot = mmc_priv(mmc);
|
|
struct mmc_data *data = mrq->data;
|
|
|
|
if (!slot->host->use_dma || !data)
|
|
return;
|
|
|
|
if (data->host_cookie) {
|
|
data->host_cookie = 0;
|
|
return;
|
|
}
|
|
|
|
if (dw_mci_pre_dma_transfer(slot->host, mrq->data, 1) < 0)
|
|
data->host_cookie = 0;
|
|
}
|
|
|
|
static void dw_mci_post_req(struct mmc_host *mmc,
|
|
struct mmc_request *mrq,
|
|
int err)
|
|
{
|
|
struct dw_mci_slot *slot = mmc_priv(mmc);
|
|
struct mmc_data *data = mrq->data;
|
|
|
|
if (!slot->host->use_dma || !data)
|
|
return;
|
|
|
|
if (data->host_cookie)
|
|
dma_unmap_sg(slot->host->dev,
|
|
data->sg,
|
|
data->sg_len,
|
|
dw_mci_get_dma_dir(data));
|
|
data->host_cookie = 0;
|
|
}
|
|
|
|
static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
|
|
{
|
|
int sg_len;
|
|
u32 temp;
|
|
|
|
host->using_dma = 0;
|
|
|
|
/* If we don't have a channel, we can't do DMA */
|
|
if (!host->use_dma)
|
|
return -ENODEV;
|
|
|
|
sg_len = dw_mci_pre_dma_transfer(host, data, 0);
|
|
if (sg_len < 0) {
|
|
host->dma_ops->stop(host);
|
|
return sg_len;
|
|
}
|
|
|
|
host->using_dma = 1;
|
|
|
|
dev_vdbg(host->dev,
|
|
"sd sg_cpu: %#lx sg_dma: %#lx sg_len: %d\n",
|
|
(unsigned long)host->sg_cpu, (unsigned long)host->sg_dma,
|
|
sg_len);
|
|
|
|
/* Enable the DMA interface */
|
|
temp = mci_readl(host, CTRL);
|
|
temp |= SDMMC_CTRL_DMA_ENABLE;
|
|
mci_writel(host, CTRL, temp);
|
|
|
|
/* Disable RX/TX IRQs, let DMA handle it */
|
|
temp = mci_readl(host, INTMASK);
|
|
temp &= ~(SDMMC_INT_RXDR | SDMMC_INT_TXDR);
|
|
mci_writel(host, INTMASK, temp);
|
|
|
|
host->dma_ops->start(host, sg_len);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dw_mci_submit_data(struct dw_mci *host, struct mmc_data *data)
|
|
{
|
|
u32 temp;
|
|
|
|
data->error = -EINPROGRESS;
|
|
|
|
WARN_ON(host->data);
|
|
host->sg = NULL;
|
|
host->data = data;
|
|
|
|
if (data->flags & MMC_DATA_READ)
|
|
host->dir_status = DW_MCI_RECV_STATUS;
|
|
else
|
|
host->dir_status = DW_MCI_SEND_STATUS;
|
|
|
|
if (dw_mci_submit_data_dma(host, data)) {
|
|
int flags = SG_MITER_ATOMIC;
|
|
if (host->data->flags & MMC_DATA_READ)
|
|
flags |= SG_MITER_TO_SG;
|
|
else
|
|
flags |= SG_MITER_FROM_SG;
|
|
|
|
sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
|
|
host->sg = data->sg;
|
|
host->part_buf_start = 0;
|
|
host->part_buf_count = 0;
|
|
|
|
mci_writel(host, RINTSTS, SDMMC_INT_TXDR | SDMMC_INT_RXDR);
|
|
temp = mci_readl(host, INTMASK);
|
|
temp |= SDMMC_INT_TXDR | SDMMC_INT_RXDR;
|
|
mci_writel(host, INTMASK, temp);
|
|
|
|
temp = mci_readl(host, CTRL);
|
|
temp &= ~SDMMC_CTRL_DMA_ENABLE;
|
|
mci_writel(host, CTRL, temp);
|
|
}
|
|
}
|
|
|
|
static void mci_send_cmd(struct dw_mci_slot *slot, u32 cmd, u32 arg)
|
|
{
|
|
struct dw_mci *host = slot->host;
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(500);
|
|
unsigned int cmd_status = 0;
|
|
|
|
mci_writel(host, CMDARG, arg);
|
|
wmb();
|
|
mci_writel(host, CMD, SDMMC_CMD_START | cmd);
|
|
|
|
while (time_before(jiffies, timeout)) {
|
|
cmd_status = mci_readl(host, CMD);
|
|
if (!(cmd_status & SDMMC_CMD_START))
|
|
return;
|
|
}
|
|
dev_err(&slot->mmc->class_dev,
|
|
"Timeout sending command (cmd %#x arg %#x status %#x)\n",
|
|
cmd, arg, cmd_status);
|
|
}
|
|
|
|
static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit)
|
|
{
|
|
struct dw_mci *host = slot->host;
|
|
u32 div;
|
|
u32 clk_en_a;
|
|
|
|
if (slot->clock != host->current_speed || force_clkinit) {
|
|
div = host->bus_hz / slot->clock;
|
|
if (host->bus_hz % slot->clock && host->bus_hz > slot->clock)
|
|
/*
|
|
* move the + 1 after the divide to prevent
|
|
* over-clocking the card.
|
|
*/
|
|
div += 1;
|
|
|
|
div = (host->bus_hz != slot->clock) ? DIV_ROUND_UP(div, 2) : 0;
|
|
|
|
dev_info(&slot->mmc->class_dev,
|
|
"Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ"
|
|
" div = %d)\n", slot->id, host->bus_hz, slot->clock,
|
|
div ? ((host->bus_hz / div) >> 1) : host->bus_hz, div);
|
|
|
|
/* disable clock */
|
|
mci_writel(host, CLKENA, 0);
|
|
mci_writel(host, CLKSRC, 0);
|
|
|
|
/* inform CIU */
|
|
mci_send_cmd(slot,
|
|
SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0);
|
|
|
|
/* set clock to desired speed */
|
|
mci_writel(host, CLKDIV, div);
|
|
|
|
/* inform CIU */
|
|
mci_send_cmd(slot,
|
|
SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0);
|
|
|
|
/* enable clock; only low power if no SDIO */
|
|
clk_en_a = SDMMC_CLKEN_ENABLE << slot->id;
|
|
if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->id)))
|
|
clk_en_a |= SDMMC_CLKEN_LOW_PWR << slot->id;
|
|
mci_writel(host, CLKENA, clk_en_a);
|
|
|
|
/* inform CIU */
|
|
mci_send_cmd(slot,
|
|
SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0);
|
|
|
|
host->current_speed = slot->clock;
|
|
}
|
|
|
|
/* Set the current slot bus width */
|
|
mci_writel(host, CTYPE, (slot->ctype << slot->id));
|
|
}
|
|
|
|
static void __dw_mci_start_request(struct dw_mci *host,
|
|
struct dw_mci_slot *slot,
|
|
struct mmc_command *cmd)
|
|
{
|
|
struct mmc_request *mrq;
|
|
struct mmc_data *data;
|
|
u32 cmdflags;
|
|
|
|
mrq = slot->mrq;
|
|
if (host->pdata->select_slot)
|
|
host->pdata->select_slot(slot->id);
|
|
|
|
host->cur_slot = slot;
|
|
host->mrq = mrq;
|
|
|
|
host->pending_events = 0;
|
|
host->completed_events = 0;
|
|
host->data_status = 0;
|
|
|
|
data = cmd->data;
|
|
if (data) {
|
|
dw_mci_set_timeout(host);
|
|
mci_writel(host, BYTCNT, data->blksz*data->blocks);
|
|
mci_writel(host, BLKSIZ, data->blksz);
|
|
}
|
|
|
|
cmdflags = dw_mci_prepare_command(slot->mmc, cmd);
|
|
|
|
/* this is the first command, send the initialization clock */
|
|
if (test_and_clear_bit(DW_MMC_CARD_NEED_INIT, &slot->flags))
|
|
cmdflags |= SDMMC_CMD_INIT;
|
|
|
|
if (data) {
|
|
dw_mci_submit_data(host, data);
|
|
wmb();
|
|
}
|
|
|
|
dw_mci_start_command(host, cmd, cmdflags);
|
|
|
|
if (mrq->stop)
|
|
host->stop_cmdr = dw_mci_prepare_command(slot->mmc, mrq->stop);
|
|
}
|
|
|
|
static void dw_mci_start_request(struct dw_mci *host,
|
|
struct dw_mci_slot *slot)
|
|
{
|
|
struct mmc_request *mrq = slot->mrq;
|
|
struct mmc_command *cmd;
|
|
|
|
cmd = mrq->sbc ? mrq->sbc : mrq->cmd;
|
|
__dw_mci_start_request(host, slot, cmd);
|
|
}
|
|
|
|
/* must be called with host->lock held */
|
|
static void dw_mci_queue_request(struct dw_mci *host, struct dw_mci_slot *slot,
|
|
struct mmc_request *mrq)
|
|
{
|
|
dev_vdbg(&slot->mmc->class_dev, "queue request: state=%d\n",
|
|
host->state);
|
|
|
|
slot->mrq = mrq;
|
|
|
|
if (host->state == STATE_IDLE) {
|
|
host->state = STATE_SENDING_CMD;
|
|
dw_mci_start_request(host, slot);
|
|
} else {
|
|
list_add_tail(&slot->queue_node, &host->queue);
|
|
}
|
|
}
|
|
|
|
static void dw_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
|
|
{
|
|
struct dw_mci_slot *slot = mmc_priv(mmc);
|
|
struct dw_mci *host = slot->host;
|
|
|
|
WARN_ON(slot->mrq);
|
|
|
|
/*
|
|
* The check for card presence and queueing of the request must be
|
|
* atomic, otherwise the card could be removed in between and the
|
|
* request wouldn't fail until another card was inserted.
|
|
*/
|
|
spin_lock_bh(&host->lock);
|
|
|
|
if (!test_bit(DW_MMC_CARD_PRESENT, &slot->flags)) {
|
|
spin_unlock_bh(&host->lock);
|
|
mrq->cmd->error = -ENOMEDIUM;
|
|
mmc_request_done(mmc, mrq);
|
|
return;
|
|
}
|
|
|
|
dw_mci_queue_request(host, slot, mrq);
|
|
|
|
spin_unlock_bh(&host->lock);
|
|
}
|
|
|
|
static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
{
|
|
struct dw_mci_slot *slot = mmc_priv(mmc);
|
|
const struct dw_mci_drv_data *drv_data = slot->host->drv_data;
|
|
u32 regs;
|
|
|
|
switch (ios->bus_width) {
|
|
case MMC_BUS_WIDTH_4:
|
|
slot->ctype = SDMMC_CTYPE_4BIT;
|
|
break;
|
|
case MMC_BUS_WIDTH_8:
|
|
slot->ctype = SDMMC_CTYPE_8BIT;
|
|
break;
|
|
default:
|
|
/* set default 1 bit mode */
|
|
slot->ctype = SDMMC_CTYPE_1BIT;
|
|
}
|
|
|
|
regs = mci_readl(slot->host, UHS_REG);
|
|
|
|
/* DDR mode set */
|
|
if (ios->timing == MMC_TIMING_UHS_DDR50)
|
|
regs |= ((0x1 << slot->id) << 16);
|
|
else
|
|
regs &= ~((0x1 << slot->id) << 16);
|
|
|
|
mci_writel(slot->host, UHS_REG, regs);
|
|
|
|
if (ios->clock) {
|
|
/*
|
|
* Use mirror of ios->clock to prevent race with mmc
|
|
* core ios update when finding the minimum.
|
|
*/
|
|
slot->clock = ios->clock;
|
|
}
|
|
|
|
if (drv_data && drv_data->set_ios)
|
|
drv_data->set_ios(slot->host, ios);
|
|
|
|
/* Slot specific timing and width adjustment */
|
|
dw_mci_setup_bus(slot, false);
|
|
|
|
switch (ios->power_mode) {
|
|
case MMC_POWER_UP:
|
|
set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags);
|
|
/* Power up slot */
|
|
if (slot->host->pdata->setpower)
|
|
slot->host->pdata->setpower(slot->id, mmc->ocr_avail);
|
|
break;
|
|
case MMC_POWER_OFF:
|
|
/* Power down slot */
|
|
if (slot->host->pdata->setpower)
|
|
slot->host->pdata->setpower(slot->id, 0);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int dw_mci_get_ro(struct mmc_host *mmc)
|
|
{
|
|
int read_only;
|
|
struct dw_mci_slot *slot = mmc_priv(mmc);
|
|
struct dw_mci_board *brd = slot->host->pdata;
|
|
|
|
/* Use platform get_ro function, else try on board write protect */
|
|
if (slot->quirks & DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT)
|
|
read_only = 0;
|
|
else if (brd->get_ro)
|
|
read_only = brd->get_ro(slot->id);
|
|
else if (gpio_is_valid(slot->wp_gpio))
|
|
read_only = gpio_get_value(slot->wp_gpio);
|
|
else
|
|
read_only =
|
|
mci_readl(slot->host, WRTPRT) & (1 << slot->id) ? 1 : 0;
|
|
|
|
dev_dbg(&mmc->class_dev, "card is %s\n",
|
|
read_only ? "read-only" : "read-write");
|
|
|
|
return read_only;
|
|
}
|
|
|
|
static int dw_mci_get_cd(struct mmc_host *mmc)
|
|
{
|
|
int present;
|
|
struct dw_mci_slot *slot = mmc_priv(mmc);
|
|
struct dw_mci_board *brd = slot->host->pdata;
|
|
|
|
/* Use platform get_cd function, else try onboard card detect */
|
|
if (brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
|
|
present = 1;
|
|
else if (brd->get_cd)
|
|
present = !brd->get_cd(slot->id);
|
|
else
|
|
present = (mci_readl(slot->host, CDETECT) & (1 << slot->id))
|
|
== 0 ? 1 : 0;
|
|
|
|
if (present)
|
|
dev_dbg(&mmc->class_dev, "card is present\n");
|
|
else
|
|
dev_dbg(&mmc->class_dev, "card is not present\n");
|
|
|
|
return present;
|
|
}
|
|
|
|
/*
|
|
* Disable lower power mode.
|
|
*
|
|
* Low power mode will stop the card clock when idle. According to the
|
|
* description of the CLKENA register we should disable low power mode
|
|
* for SDIO cards if we need SDIO interrupts to work.
|
|
*
|
|
* This function is fast if low power mode is already disabled.
|
|
*/
|
|
static void dw_mci_disable_low_power(struct dw_mci_slot *slot)
|
|
{
|
|
struct dw_mci *host = slot->host;
|
|
u32 clk_en_a;
|
|
const u32 clken_low_pwr = SDMMC_CLKEN_LOW_PWR << slot->id;
|
|
|
|
clk_en_a = mci_readl(host, CLKENA);
|
|
|
|
if (clk_en_a & clken_low_pwr) {
|
|
mci_writel(host, CLKENA, clk_en_a & ~clken_low_pwr);
|
|
mci_send_cmd(slot, SDMMC_CMD_UPD_CLK |
|
|
SDMMC_CMD_PRV_DAT_WAIT, 0);
|
|
}
|
|
}
|
|
|
|
static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb)
|
|
{
|
|
struct dw_mci_slot *slot = mmc_priv(mmc);
|
|
struct dw_mci *host = slot->host;
|
|
u32 int_mask;
|
|
|
|
/* Enable/disable Slot Specific SDIO interrupt */
|
|
int_mask = mci_readl(host, INTMASK);
|
|
if (enb) {
|
|
/*
|
|
* Turn off low power mode if it was enabled. This is a bit of
|
|
* a heavy operation and we disable / enable IRQs a lot, so
|
|
* we'll leave low power mode disabled and it will get
|
|
* re-enabled again in dw_mci_setup_bus().
|
|
*/
|
|
dw_mci_disable_low_power(slot);
|
|
|
|
mci_writel(host, INTMASK,
|
|
(int_mask | SDMMC_INT_SDIO(slot->id)));
|
|
} else {
|
|
mci_writel(host, INTMASK,
|
|
(int_mask & ~SDMMC_INT_SDIO(slot->id)));
|
|
}
|
|
}
|
|
|
|
static const struct mmc_host_ops dw_mci_ops = {
|
|
.request = dw_mci_request,
|
|
.pre_req = dw_mci_pre_req,
|
|
.post_req = dw_mci_post_req,
|
|
.set_ios = dw_mci_set_ios,
|
|
.get_ro = dw_mci_get_ro,
|
|
.get_cd = dw_mci_get_cd,
|
|
.enable_sdio_irq = dw_mci_enable_sdio_irq,
|
|
};
|
|
|
|
static void dw_mci_request_end(struct dw_mci *host, struct mmc_request *mrq)
|
|
__releases(&host->lock)
|
|
__acquires(&host->lock)
|
|
{
|
|
struct dw_mci_slot *slot;
|
|
struct mmc_host *prev_mmc = host->cur_slot->mmc;
|
|
|
|
WARN_ON(host->cmd || host->data);
|
|
|
|
host->cur_slot->mrq = NULL;
|
|
host->mrq = NULL;
|
|
if (!list_empty(&host->queue)) {
|
|
slot = list_entry(host->queue.next,
|
|
struct dw_mci_slot, queue_node);
|
|
list_del(&slot->queue_node);
|
|
dev_vdbg(host->dev, "list not empty: %s is next\n",
|
|
mmc_hostname(slot->mmc));
|
|
host->state = STATE_SENDING_CMD;
|
|
dw_mci_start_request(host, slot);
|
|
} else {
|
|
dev_vdbg(host->dev, "list empty\n");
|
|
host->state = STATE_IDLE;
|
|
}
|
|
|
|
spin_unlock(&host->lock);
|
|
mmc_request_done(prev_mmc, mrq);
|
|
spin_lock(&host->lock);
|
|
}
|
|
|
|
static void dw_mci_command_complete(struct dw_mci *host, struct mmc_command *cmd)
|
|
{
|
|
u32 status = host->cmd_status;
|
|
|
|
host->cmd_status = 0;
|
|
|
|
/* Read the response from the card (up to 16 bytes) */
|
|
if (cmd->flags & MMC_RSP_PRESENT) {
|
|
if (cmd->flags & MMC_RSP_136) {
|
|
cmd->resp[3] = mci_readl(host, RESP0);
|
|
cmd->resp[2] = mci_readl(host, RESP1);
|
|
cmd->resp[1] = mci_readl(host, RESP2);
|
|
cmd->resp[0] = mci_readl(host, RESP3);
|
|
} else {
|
|
cmd->resp[0] = mci_readl(host, RESP0);
|
|
cmd->resp[1] = 0;
|
|
cmd->resp[2] = 0;
|
|
cmd->resp[3] = 0;
|
|
}
|
|
}
|
|
|
|
if (status & SDMMC_INT_RTO)
|
|
cmd->error = -ETIMEDOUT;
|
|
else if ((cmd->flags & MMC_RSP_CRC) && (status & SDMMC_INT_RCRC))
|
|
cmd->error = -EILSEQ;
|
|
else if (status & SDMMC_INT_RESP_ERR)
|
|
cmd->error = -EIO;
|
|
else
|
|
cmd->error = 0;
|
|
|
|
if (cmd->error) {
|
|
/* newer ip versions need a delay between retries */
|
|
if (host->quirks & DW_MCI_QUIRK_RETRY_DELAY)
|
|
mdelay(20);
|
|
|
|
if (cmd->data) {
|
|
dw_mci_stop_dma(host);
|
|
host->data = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void dw_mci_tasklet_func(unsigned long priv)
|
|
{
|
|
struct dw_mci *host = (struct dw_mci *)priv;
|
|
struct mmc_data *data;
|
|
struct mmc_command *cmd;
|
|
enum dw_mci_state state;
|
|
enum dw_mci_state prev_state;
|
|
u32 status, ctrl;
|
|
|
|
spin_lock(&host->lock);
|
|
|
|
state = host->state;
|
|
data = host->data;
|
|
|
|
do {
|
|
prev_state = state;
|
|
|
|
switch (state) {
|
|
case STATE_IDLE:
|
|
break;
|
|
|
|
case STATE_SENDING_CMD:
|
|
if (!test_and_clear_bit(EVENT_CMD_COMPLETE,
|
|
&host->pending_events))
|
|
break;
|
|
|
|
cmd = host->cmd;
|
|
host->cmd = NULL;
|
|
set_bit(EVENT_CMD_COMPLETE, &host->completed_events);
|
|
dw_mci_command_complete(host, cmd);
|
|
if (cmd == host->mrq->sbc && !cmd->error) {
|
|
prev_state = state = STATE_SENDING_CMD;
|
|
__dw_mci_start_request(host, host->cur_slot,
|
|
host->mrq->cmd);
|
|
goto unlock;
|
|
}
|
|
|
|
if (!host->mrq->data || cmd->error) {
|
|
dw_mci_request_end(host, host->mrq);
|
|
goto unlock;
|
|
}
|
|
|
|
prev_state = state = STATE_SENDING_DATA;
|
|
/* fall through */
|
|
|
|
case STATE_SENDING_DATA:
|
|
if (test_and_clear_bit(EVENT_DATA_ERROR,
|
|
&host->pending_events)) {
|
|
dw_mci_stop_dma(host);
|
|
if (data->stop)
|
|
send_stop_cmd(host, data);
|
|
state = STATE_DATA_ERROR;
|
|
break;
|
|
}
|
|
|
|
if (!test_and_clear_bit(EVENT_XFER_COMPLETE,
|
|
&host->pending_events))
|
|
break;
|
|
|
|
set_bit(EVENT_XFER_COMPLETE, &host->completed_events);
|
|
prev_state = state = STATE_DATA_BUSY;
|
|
/* fall through */
|
|
|
|
case STATE_DATA_BUSY:
|
|
if (!test_and_clear_bit(EVENT_DATA_COMPLETE,
|
|
&host->pending_events))
|
|
break;
|
|
|
|
host->data = NULL;
|
|
set_bit(EVENT_DATA_COMPLETE, &host->completed_events);
|
|
status = host->data_status;
|
|
|
|
if (status & DW_MCI_DATA_ERROR_FLAGS) {
|
|
if (status & SDMMC_INT_DTO) {
|
|
data->error = -ETIMEDOUT;
|
|
} else if (status & SDMMC_INT_DCRC) {
|
|
data->error = -EILSEQ;
|
|
} else if (status & SDMMC_INT_EBE &&
|
|
host->dir_status ==
|
|
DW_MCI_SEND_STATUS) {
|
|
/*
|
|
* No data CRC status was returned.
|
|
* The number of bytes transferred will
|
|
* be exaggerated in PIO mode.
|
|
*/
|
|
data->bytes_xfered = 0;
|
|
data->error = -ETIMEDOUT;
|
|
} else {
|
|
dev_err(host->dev,
|
|
"data FIFO error "
|
|
"(status=%08x)\n",
|
|
status);
|
|
data->error = -EIO;
|
|
}
|
|
/*
|
|
* After an error, there may be data lingering
|
|
* in the FIFO, so reset it - doing so
|
|
* generates a block interrupt, hence setting
|
|
* the scatter-gather pointer to NULL.
|
|
*/
|
|
sg_miter_stop(&host->sg_miter);
|
|
host->sg = NULL;
|
|
ctrl = mci_readl(host, CTRL);
|
|
ctrl |= SDMMC_CTRL_FIFO_RESET;
|
|
mci_writel(host, CTRL, ctrl);
|
|
} else {
|
|
data->bytes_xfered = data->blocks * data->blksz;
|
|
data->error = 0;
|
|
}
|
|
|
|
if (!data->stop) {
|
|
dw_mci_request_end(host, host->mrq);
|
|
goto unlock;
|
|
}
|
|
|
|
if (host->mrq->sbc && !data->error) {
|
|
data->stop->error = 0;
|
|
dw_mci_request_end(host, host->mrq);
|
|
goto unlock;
|
|
}
|
|
|
|
prev_state = state = STATE_SENDING_STOP;
|
|
if (!data->error)
|
|
send_stop_cmd(host, data);
|
|
/* fall through */
|
|
|
|
case STATE_SENDING_STOP:
|
|
if (!test_and_clear_bit(EVENT_CMD_COMPLETE,
|
|
&host->pending_events))
|
|
break;
|
|
|
|
host->cmd = NULL;
|
|
dw_mci_command_complete(host, host->mrq->stop);
|
|
dw_mci_request_end(host, host->mrq);
|
|
goto unlock;
|
|
|
|
case STATE_DATA_ERROR:
|
|
if (!test_and_clear_bit(EVENT_XFER_COMPLETE,
|
|
&host->pending_events))
|
|
break;
|
|
|
|
state = STATE_DATA_BUSY;
|
|
break;
|
|
}
|
|
} while (state != prev_state);
|
|
|
|
host->state = state;
|
|
unlock:
|
|
spin_unlock(&host->lock);
|
|
|
|
}
|
|
|
|
/* push final bytes to part_buf, only use during push */
|
|
static void dw_mci_set_part_bytes(struct dw_mci *host, void *buf, int cnt)
|
|
{
|
|
memcpy((void *)&host->part_buf, buf, cnt);
|
|
host->part_buf_count = cnt;
|
|
}
|
|
|
|
/* append bytes to part_buf, only use during push */
|
|
static int dw_mci_push_part_bytes(struct dw_mci *host, void *buf, int cnt)
|
|
{
|
|
cnt = min(cnt, (1 << host->data_shift) - host->part_buf_count);
|
|
memcpy((void *)&host->part_buf + host->part_buf_count, buf, cnt);
|
|
host->part_buf_count += cnt;
|
|
return cnt;
|
|
}
|
|
|
|
/* pull first bytes from part_buf, only use during pull */
|
|
static int dw_mci_pull_part_bytes(struct dw_mci *host, void *buf, int cnt)
|
|
{
|
|
cnt = min(cnt, (int)host->part_buf_count);
|
|
if (cnt) {
|
|
memcpy(buf, (void *)&host->part_buf + host->part_buf_start,
|
|
cnt);
|
|
host->part_buf_count -= cnt;
|
|
host->part_buf_start += cnt;
|
|
}
|
|
return cnt;
|
|
}
|
|
|
|
/* pull final bytes from the part_buf, assuming it's just been filled */
|
|
static void dw_mci_pull_final_bytes(struct dw_mci *host, void *buf, int cnt)
|
|
{
|
|
memcpy(buf, &host->part_buf, cnt);
|
|
host->part_buf_start = cnt;
|
|
host->part_buf_count = (1 << host->data_shift) - cnt;
|
|
}
|
|
|
|
static void dw_mci_push_data16(struct dw_mci *host, void *buf, int cnt)
|
|
{
|
|
struct mmc_data *data = host->data;
|
|
int init_cnt = cnt;
|
|
|
|
/* try and push anything in the part_buf */
|
|
if (unlikely(host->part_buf_count)) {
|
|
int len = dw_mci_push_part_bytes(host, buf, cnt);
|
|
buf += len;
|
|
cnt -= len;
|
|
if (host->part_buf_count == 2) {
|
|
mci_writew(host, DATA(host->data_offset),
|
|
host->part_buf16);
|
|
host->part_buf_count = 0;
|
|
}
|
|
}
|
|
#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
|
|
if (unlikely((unsigned long)buf & 0x1)) {
|
|
while (cnt >= 2) {
|
|
u16 aligned_buf[64];
|
|
int len = min(cnt & -2, (int)sizeof(aligned_buf));
|
|
int items = len >> 1;
|
|
int i;
|
|
/* memcpy from input buffer into aligned buffer */
|
|
memcpy(aligned_buf, buf, len);
|
|
buf += len;
|
|
cnt -= len;
|
|
/* push data from aligned buffer into fifo */
|
|
for (i = 0; i < items; ++i)
|
|
mci_writew(host, DATA(host->data_offset),
|
|
aligned_buf[i]);
|
|
}
|
|
} else
|
|
#endif
|
|
{
|
|
u16 *pdata = buf;
|
|
for (; cnt >= 2; cnt -= 2)
|
|
mci_writew(host, DATA(host->data_offset), *pdata++);
|
|
buf = pdata;
|
|
}
|
|
/* put anything remaining in the part_buf */
|
|
if (cnt) {
|
|
dw_mci_set_part_bytes(host, buf, cnt);
|
|
/* Push data if we have reached the expected data length */
|
|
if ((data->bytes_xfered + init_cnt) ==
|
|
(data->blksz * data->blocks))
|
|
mci_writew(host, DATA(host->data_offset),
|
|
host->part_buf16);
|
|
}
|
|
}
|
|
|
|
static void dw_mci_pull_data16(struct dw_mci *host, void *buf, int cnt)
|
|
{
|
|
#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
|
|
if (unlikely((unsigned long)buf & 0x1)) {
|
|
while (cnt >= 2) {
|
|
/* pull data from fifo into aligned buffer */
|
|
u16 aligned_buf[64];
|
|
int len = min(cnt & -2, (int)sizeof(aligned_buf));
|
|
int items = len >> 1;
|
|
int i;
|
|
for (i = 0; i < items; ++i)
|
|
aligned_buf[i] = mci_readw(host,
|
|
DATA(host->data_offset));
|
|
/* memcpy from aligned buffer into output buffer */
|
|
memcpy(buf, aligned_buf, len);
|
|
buf += len;
|
|
cnt -= len;
|
|
}
|
|
} else
|
|
#endif
|
|
{
|
|
u16 *pdata = buf;
|
|
for (; cnt >= 2; cnt -= 2)
|
|
*pdata++ = mci_readw(host, DATA(host->data_offset));
|
|
buf = pdata;
|
|
}
|
|
if (cnt) {
|
|
host->part_buf16 = mci_readw(host, DATA(host->data_offset));
|
|
dw_mci_pull_final_bytes(host, buf, cnt);
|
|
}
|
|
}
|
|
|
|
static void dw_mci_push_data32(struct dw_mci *host, void *buf, int cnt)
|
|
{
|
|
struct mmc_data *data = host->data;
|
|
int init_cnt = cnt;
|
|
|
|
/* try and push anything in the part_buf */
|
|
if (unlikely(host->part_buf_count)) {
|
|
int len = dw_mci_push_part_bytes(host, buf, cnt);
|
|
buf += len;
|
|
cnt -= len;
|
|
if (host->part_buf_count == 4) {
|
|
mci_writel(host, DATA(host->data_offset),
|
|
host->part_buf32);
|
|
host->part_buf_count = 0;
|
|
}
|
|
}
|
|
#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
|
|
if (unlikely((unsigned long)buf & 0x3)) {
|
|
while (cnt >= 4) {
|
|
u32 aligned_buf[32];
|
|
int len = min(cnt & -4, (int)sizeof(aligned_buf));
|
|
int items = len >> 2;
|
|
int i;
|
|
/* memcpy from input buffer into aligned buffer */
|
|
memcpy(aligned_buf, buf, len);
|
|
buf += len;
|
|
cnt -= len;
|
|
/* push data from aligned buffer into fifo */
|
|
for (i = 0; i < items; ++i)
|
|
mci_writel(host, DATA(host->data_offset),
|
|
aligned_buf[i]);
|
|
}
|
|
} else
|
|
#endif
|
|
{
|
|
u32 *pdata = buf;
|
|
for (; cnt >= 4; cnt -= 4)
|
|
mci_writel(host, DATA(host->data_offset), *pdata++);
|
|
buf = pdata;
|
|
}
|
|
/* put anything remaining in the part_buf */
|
|
if (cnt) {
|
|
dw_mci_set_part_bytes(host, buf, cnt);
|
|
/* Push data if we have reached the expected data length */
|
|
if ((data->bytes_xfered + init_cnt) ==
|
|
(data->blksz * data->blocks))
|
|
mci_writel(host, DATA(host->data_offset),
|
|
host->part_buf32);
|
|
}
|
|
}
|
|
|
|
static void dw_mci_pull_data32(struct dw_mci *host, void *buf, int cnt)
|
|
{
|
|
#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
|
|
if (unlikely((unsigned long)buf & 0x3)) {
|
|
while (cnt >= 4) {
|
|
/* pull data from fifo into aligned buffer */
|
|
u32 aligned_buf[32];
|
|
int len = min(cnt & -4, (int)sizeof(aligned_buf));
|
|
int items = len >> 2;
|
|
int i;
|
|
for (i = 0; i < items; ++i)
|
|
aligned_buf[i] = mci_readl(host,
|
|
DATA(host->data_offset));
|
|
/* memcpy from aligned buffer into output buffer */
|
|
memcpy(buf, aligned_buf, len);
|
|
buf += len;
|
|
cnt -= len;
|
|
}
|
|
} else
|
|
#endif
|
|
{
|
|
u32 *pdata = buf;
|
|
for (; cnt >= 4; cnt -= 4)
|
|
*pdata++ = mci_readl(host, DATA(host->data_offset));
|
|
buf = pdata;
|
|
}
|
|
if (cnt) {
|
|
host->part_buf32 = mci_readl(host, DATA(host->data_offset));
|
|
dw_mci_pull_final_bytes(host, buf, cnt);
|
|
}
|
|
}
|
|
|
|
static void dw_mci_push_data64(struct dw_mci *host, void *buf, int cnt)
|
|
{
|
|
struct mmc_data *data = host->data;
|
|
int init_cnt = cnt;
|
|
|
|
/* try and push anything in the part_buf */
|
|
if (unlikely(host->part_buf_count)) {
|
|
int len = dw_mci_push_part_bytes(host, buf, cnt);
|
|
buf += len;
|
|
cnt -= len;
|
|
if (host->part_buf_count == 8) {
|
|
mci_writew(host, DATA(host->data_offset),
|
|
host->part_buf);
|
|
host->part_buf_count = 0;
|
|
}
|
|
}
|
|
#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
|
|
if (unlikely((unsigned long)buf & 0x7)) {
|
|
while (cnt >= 8) {
|
|
u64 aligned_buf[16];
|
|
int len = min(cnt & -8, (int)sizeof(aligned_buf));
|
|
int items = len >> 3;
|
|
int i;
|
|
/* memcpy from input buffer into aligned buffer */
|
|
memcpy(aligned_buf, buf, len);
|
|
buf += len;
|
|
cnt -= len;
|
|
/* push data from aligned buffer into fifo */
|
|
for (i = 0; i < items; ++i)
|
|
mci_writeq(host, DATA(host->data_offset),
|
|
aligned_buf[i]);
|
|
}
|
|
} else
|
|
#endif
|
|
{
|
|
u64 *pdata = buf;
|
|
for (; cnt >= 8; cnt -= 8)
|
|
mci_writeq(host, DATA(host->data_offset), *pdata++);
|
|
buf = pdata;
|
|
}
|
|
/* put anything remaining in the part_buf */
|
|
if (cnt) {
|
|
dw_mci_set_part_bytes(host, buf, cnt);
|
|
/* Push data if we have reached the expected data length */
|
|
if ((data->bytes_xfered + init_cnt) ==
|
|
(data->blksz * data->blocks))
|
|
mci_writeq(host, DATA(host->data_offset),
|
|
host->part_buf);
|
|
}
|
|
}
|
|
|
|
static void dw_mci_pull_data64(struct dw_mci *host, void *buf, int cnt)
|
|
{
|
|
#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
|
|
if (unlikely((unsigned long)buf & 0x7)) {
|
|
while (cnt >= 8) {
|
|
/* pull data from fifo into aligned buffer */
|
|
u64 aligned_buf[16];
|
|
int len = min(cnt & -8, (int)sizeof(aligned_buf));
|
|
int items = len >> 3;
|
|
int i;
|
|
for (i = 0; i < items; ++i)
|
|
aligned_buf[i] = mci_readq(host,
|
|
DATA(host->data_offset));
|
|
/* memcpy from aligned buffer into output buffer */
|
|
memcpy(buf, aligned_buf, len);
|
|
buf += len;
|
|
cnt -= len;
|
|
}
|
|
} else
|
|
#endif
|
|
{
|
|
u64 *pdata = buf;
|
|
for (; cnt >= 8; cnt -= 8)
|
|
*pdata++ = mci_readq(host, DATA(host->data_offset));
|
|
buf = pdata;
|
|
}
|
|
if (cnt) {
|
|
host->part_buf = mci_readq(host, DATA(host->data_offset));
|
|
dw_mci_pull_final_bytes(host, buf, cnt);
|
|
}
|
|
}
|
|
|
|
static void dw_mci_pull_data(struct dw_mci *host, void *buf, int cnt)
|
|
{
|
|
int len;
|
|
|
|
/* get remaining partial bytes */
|
|
len = dw_mci_pull_part_bytes(host, buf, cnt);
|
|
if (unlikely(len == cnt))
|
|
return;
|
|
buf += len;
|
|
cnt -= len;
|
|
|
|
/* get the rest of the data */
|
|
host->pull_data(host, buf, cnt);
|
|
}
|
|
|
|
static void dw_mci_read_data_pio(struct dw_mci *host, bool dto)
|
|
{
|
|
struct sg_mapping_iter *sg_miter = &host->sg_miter;
|
|
void *buf;
|
|
unsigned int offset;
|
|
struct mmc_data *data = host->data;
|
|
int shift = host->data_shift;
|
|
u32 status;
|
|
unsigned int len;
|
|
unsigned int remain, fcnt;
|
|
|
|
do {
|
|
if (!sg_miter_next(sg_miter))
|
|
goto done;
|
|
|
|
host->sg = sg_miter->piter.sg;
|
|
buf = sg_miter->addr;
|
|
remain = sg_miter->length;
|
|
offset = 0;
|
|
|
|
do {
|
|
fcnt = (SDMMC_GET_FCNT(mci_readl(host, STATUS))
|
|
<< shift) + host->part_buf_count;
|
|
len = min(remain, fcnt);
|
|
if (!len)
|
|
break;
|
|
dw_mci_pull_data(host, (void *)(buf + offset), len);
|
|
data->bytes_xfered += len;
|
|
offset += len;
|
|
remain -= len;
|
|
} while (remain);
|
|
|
|
sg_miter->consumed = offset;
|
|
status = mci_readl(host, MINTSTS);
|
|
mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
|
|
/* if the RXDR is ready read again */
|
|
} while ((status & SDMMC_INT_RXDR) ||
|
|
(dto && SDMMC_GET_FCNT(mci_readl(host, STATUS))));
|
|
|
|
if (!remain) {
|
|
if (!sg_miter_next(sg_miter))
|
|
goto done;
|
|
sg_miter->consumed = 0;
|
|
}
|
|
sg_miter_stop(sg_miter);
|
|
return;
|
|
|
|
done:
|
|
sg_miter_stop(sg_miter);
|
|
host->sg = NULL;
|
|
smp_wmb();
|
|
set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
|
|
}
|
|
|
|
static void dw_mci_write_data_pio(struct dw_mci *host)
|
|
{
|
|
struct sg_mapping_iter *sg_miter = &host->sg_miter;
|
|
void *buf;
|
|
unsigned int offset;
|
|
struct mmc_data *data = host->data;
|
|
int shift = host->data_shift;
|
|
u32 status;
|
|
unsigned int len;
|
|
unsigned int fifo_depth = host->fifo_depth;
|
|
unsigned int remain, fcnt;
|
|
|
|
do {
|
|
if (!sg_miter_next(sg_miter))
|
|
goto done;
|
|
|
|
host->sg = sg_miter->piter.sg;
|
|
buf = sg_miter->addr;
|
|
remain = sg_miter->length;
|
|
offset = 0;
|
|
|
|
do {
|
|
fcnt = ((fifo_depth -
|
|
SDMMC_GET_FCNT(mci_readl(host, STATUS)))
|
|
<< shift) - host->part_buf_count;
|
|
len = min(remain, fcnt);
|
|
if (!len)
|
|
break;
|
|
host->push_data(host, (void *)(buf + offset), len);
|
|
data->bytes_xfered += len;
|
|
offset += len;
|
|
remain -= len;
|
|
} while (remain);
|
|
|
|
sg_miter->consumed = offset;
|
|
status = mci_readl(host, MINTSTS);
|
|
mci_writel(host, RINTSTS, SDMMC_INT_TXDR);
|
|
} while (status & SDMMC_INT_TXDR); /* if TXDR write again */
|
|
|
|
if (!remain) {
|
|
if (!sg_miter_next(sg_miter))
|
|
goto done;
|
|
sg_miter->consumed = 0;
|
|
}
|
|
sg_miter_stop(sg_miter);
|
|
return;
|
|
|
|
done:
|
|
sg_miter_stop(sg_miter);
|
|
host->sg = NULL;
|
|
smp_wmb();
|
|
set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
|
|
}
|
|
|
|
static void dw_mci_cmd_interrupt(struct dw_mci *host, u32 status)
|
|
{
|
|
if (!host->cmd_status)
|
|
host->cmd_status = status;
|
|
|
|
smp_wmb();
|
|
|
|
set_bit(EVENT_CMD_COMPLETE, &host->pending_events);
|
|
tasklet_schedule(&host->tasklet);
|
|
}
|
|
|
|
static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct dw_mci *host = dev_id;
|
|
u32 pending;
|
|
int i;
|
|
|
|
pending = mci_readl(host, MINTSTS); /* read-only mask reg */
|
|
|
|
if (pending) {
|
|
|
|
/*
|
|
* DTO fix - version 2.10a and below, and only if internal DMA
|
|
* is configured.
|
|
*/
|
|
if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO) {
|
|
if (!pending &&
|
|
((mci_readl(host, STATUS) >> 17) & 0x1fff))
|
|
pending |= SDMMC_INT_DATA_OVER;
|
|
}
|
|
|
|
if (pending & DW_MCI_CMD_ERROR_FLAGS) {
|
|
mci_writel(host, RINTSTS, DW_MCI_CMD_ERROR_FLAGS);
|
|
host->cmd_status = pending;
|
|
smp_wmb();
|
|
set_bit(EVENT_CMD_COMPLETE, &host->pending_events);
|
|
}
|
|
|
|
if (pending & DW_MCI_DATA_ERROR_FLAGS) {
|
|
/* if there is an error report DATA_ERROR */
|
|
mci_writel(host, RINTSTS, DW_MCI_DATA_ERROR_FLAGS);
|
|
host->data_status = pending;
|
|
smp_wmb();
|
|
set_bit(EVENT_DATA_ERROR, &host->pending_events);
|
|
tasklet_schedule(&host->tasklet);
|
|
}
|
|
|
|
if (pending & SDMMC_INT_DATA_OVER) {
|
|
mci_writel(host, RINTSTS, SDMMC_INT_DATA_OVER);
|
|
if (!host->data_status)
|
|
host->data_status = pending;
|
|
smp_wmb();
|
|
if (host->dir_status == DW_MCI_RECV_STATUS) {
|
|
if (host->sg != NULL)
|
|
dw_mci_read_data_pio(host, true);
|
|
}
|
|
set_bit(EVENT_DATA_COMPLETE, &host->pending_events);
|
|
tasklet_schedule(&host->tasklet);
|
|
}
|
|
|
|
if (pending & SDMMC_INT_RXDR) {
|
|
mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
|
|
if (host->dir_status == DW_MCI_RECV_STATUS && host->sg)
|
|
dw_mci_read_data_pio(host, false);
|
|
}
|
|
|
|
if (pending & SDMMC_INT_TXDR) {
|
|
mci_writel(host, RINTSTS, SDMMC_INT_TXDR);
|
|
if (host->dir_status == DW_MCI_SEND_STATUS && host->sg)
|
|
dw_mci_write_data_pio(host);
|
|
}
|
|
|
|
if (pending & SDMMC_INT_CMD_DONE) {
|
|
mci_writel(host, RINTSTS, SDMMC_INT_CMD_DONE);
|
|
dw_mci_cmd_interrupt(host, pending);
|
|
}
|
|
|
|
if (pending & SDMMC_INT_CD) {
|
|
mci_writel(host, RINTSTS, SDMMC_INT_CD);
|
|
queue_work(host->card_workqueue, &host->card_work);
|
|
}
|
|
|
|
/* Handle SDIO Interrupts */
|
|
for (i = 0; i < host->num_slots; i++) {
|
|
struct dw_mci_slot *slot = host->slot[i];
|
|
if (pending & SDMMC_INT_SDIO(i)) {
|
|
mci_writel(host, RINTSTS, SDMMC_INT_SDIO(i));
|
|
mmc_signal_sdio_irq(slot->mmc);
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
#ifdef CONFIG_MMC_DW_IDMAC
|
|
/* Handle DMA interrupts */
|
|
pending = mci_readl(host, IDSTS);
|
|
if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
|
|
mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI);
|
|
mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
|
|
host->dma_ops->complete(host);
|
|
}
|
|
#endif
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void dw_mci_work_routine_card(struct work_struct *work)
|
|
{
|
|
struct dw_mci *host = container_of(work, struct dw_mci, card_work);
|
|
int i;
|
|
|
|
for (i = 0; i < host->num_slots; i++) {
|
|
struct dw_mci_slot *slot = host->slot[i];
|
|
struct mmc_host *mmc = slot->mmc;
|
|
struct mmc_request *mrq;
|
|
int present;
|
|
u32 ctrl;
|
|
|
|
present = dw_mci_get_cd(mmc);
|
|
while (present != slot->last_detect_state) {
|
|
dev_dbg(&slot->mmc->class_dev, "card %s\n",
|
|
present ? "inserted" : "removed");
|
|
|
|
spin_lock_bh(&host->lock);
|
|
|
|
/* Card change detected */
|
|
slot->last_detect_state = present;
|
|
|
|
/* Mark card as present if applicable */
|
|
if (present != 0)
|
|
set_bit(DW_MMC_CARD_PRESENT, &slot->flags);
|
|
|
|
/* Clean up queue if present */
|
|
mrq = slot->mrq;
|
|
if (mrq) {
|
|
if (mrq == host->mrq) {
|
|
host->data = NULL;
|
|
host->cmd = NULL;
|
|
|
|
switch (host->state) {
|
|
case STATE_IDLE:
|
|
break;
|
|
case STATE_SENDING_CMD:
|
|
mrq->cmd->error = -ENOMEDIUM;
|
|
if (!mrq->data)
|
|
break;
|
|
/* fall through */
|
|
case STATE_SENDING_DATA:
|
|
mrq->data->error = -ENOMEDIUM;
|
|
dw_mci_stop_dma(host);
|
|
break;
|
|
case STATE_DATA_BUSY:
|
|
case STATE_DATA_ERROR:
|
|
if (mrq->data->error == -EINPROGRESS)
|
|
mrq->data->error = -ENOMEDIUM;
|
|
if (!mrq->stop)
|
|
break;
|
|
/* fall through */
|
|
case STATE_SENDING_STOP:
|
|
mrq->stop->error = -ENOMEDIUM;
|
|
break;
|
|
}
|
|
|
|
dw_mci_request_end(host, mrq);
|
|
} else {
|
|
list_del(&slot->queue_node);
|
|
mrq->cmd->error = -ENOMEDIUM;
|
|
if (mrq->data)
|
|
mrq->data->error = -ENOMEDIUM;
|
|
if (mrq->stop)
|
|
mrq->stop->error = -ENOMEDIUM;
|
|
|
|
spin_unlock(&host->lock);
|
|
mmc_request_done(slot->mmc, mrq);
|
|
spin_lock(&host->lock);
|
|
}
|
|
}
|
|
|
|
/* Power down slot */
|
|
if (present == 0) {
|
|
clear_bit(DW_MMC_CARD_PRESENT, &slot->flags);
|
|
|
|
/*
|
|
* Clear down the FIFO - doing so generates a
|
|
* block interrupt, hence setting the
|
|
* scatter-gather pointer to NULL.
|
|
*/
|
|
sg_miter_stop(&host->sg_miter);
|
|
host->sg = NULL;
|
|
|
|
ctrl = mci_readl(host, CTRL);
|
|
ctrl |= SDMMC_CTRL_FIFO_RESET;
|
|
mci_writel(host, CTRL, ctrl);
|
|
|
|
#ifdef CONFIG_MMC_DW_IDMAC
|
|
ctrl = mci_readl(host, BMOD);
|
|
/* Software reset of DMA */
|
|
ctrl |= SDMMC_IDMAC_SWRESET;
|
|
mci_writel(host, BMOD, ctrl);
|
|
#endif
|
|
|
|
}
|
|
|
|
spin_unlock_bh(&host->lock);
|
|
|
|
present = dw_mci_get_cd(mmc);
|
|
}
|
|
|
|
mmc_detect_change(slot->mmc,
|
|
msecs_to_jiffies(host->pdata->detect_delay_ms));
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
/* given a slot id, find out the device node representing that slot */
|
|
static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot)
|
|
{
|
|
struct device_node *np;
|
|
const __be32 *addr;
|
|
int len;
|
|
|
|
if (!dev || !dev->of_node)
|
|
return NULL;
|
|
|
|
for_each_child_of_node(dev->of_node, np) {
|
|
addr = of_get_property(np, "reg", &len);
|
|
if (!addr || (len < sizeof(int)))
|
|
continue;
|
|
if (be32_to_cpup(addr) == slot)
|
|
return np;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static struct dw_mci_of_slot_quirks {
|
|
char *quirk;
|
|
int id;
|
|
} of_slot_quirks[] = {
|
|
{
|
|
.quirk = "disable-wp",
|
|
.id = DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT,
|
|
},
|
|
};
|
|
|
|
static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot)
|
|
{
|
|
struct device_node *np = dw_mci_of_find_slot_node(dev, slot);
|
|
int quirks = 0;
|
|
int idx;
|
|
|
|
/* get quirks */
|
|
for (idx = 0; idx < ARRAY_SIZE(of_slot_quirks); idx++)
|
|
if (of_get_property(np, of_slot_quirks[idx].quirk, NULL))
|
|
quirks |= of_slot_quirks[idx].id;
|
|
|
|
return quirks;
|
|
}
|
|
|
|
/* find out bus-width for a given slot */
|
|
static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot)
|
|
{
|
|
struct device_node *np = dw_mci_of_find_slot_node(dev, slot);
|
|
u32 bus_wd = 1;
|
|
|
|
if (!np)
|
|
return 1;
|
|
|
|
if (of_property_read_u32(np, "bus-width", &bus_wd))
|
|
dev_err(dev, "bus-width property not found, assuming width"
|
|
" as 1\n");
|
|
return bus_wd;
|
|
}
|
|
|
|
/* find the write protect gpio for a given slot; or -1 if none specified */
|
|
static int dw_mci_of_get_wp_gpio(struct device *dev, u8 slot)
|
|
{
|
|
struct device_node *np = dw_mci_of_find_slot_node(dev, slot);
|
|
int gpio;
|
|
|
|
if (!np)
|
|
return -EINVAL;
|
|
|
|
gpio = of_get_named_gpio(np, "wp-gpios", 0);
|
|
|
|
/* Having a missing entry is valid; return silently */
|
|
if (!gpio_is_valid(gpio))
|
|
return -EINVAL;
|
|
|
|
if (devm_gpio_request(dev, gpio, "dw-mci-wp")) {
|
|
dev_warn(dev, "gpio [%d] request failed\n", gpio);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return gpio;
|
|
}
|
|
#else /* CONFIG_OF */
|
|
static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot)
|
|
{
|
|
return 0;
|
|
}
|
|
static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot)
|
|
{
|
|
return 1;
|
|
}
|
|
static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot)
|
|
{
|
|
return NULL;
|
|
}
|
|
static int dw_mci_of_get_wp_gpio(struct device *dev, u8 slot)
|
|
{
|
|
return -EINVAL;
|
|
}
|
|
#endif /* CONFIG_OF */
|
|
|
|
static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
|
|
{
|
|
struct mmc_host *mmc;
|
|
struct dw_mci_slot *slot;
|
|
const struct dw_mci_drv_data *drv_data = host->drv_data;
|
|
int ctrl_id, ret;
|
|
u8 bus_width;
|
|
|
|
mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), host->dev);
|
|
if (!mmc)
|
|
return -ENOMEM;
|
|
|
|
slot = mmc_priv(mmc);
|
|
slot->id = id;
|
|
slot->mmc = mmc;
|
|
slot->host = host;
|
|
host->slot[id] = slot;
|
|
|
|
slot->quirks = dw_mci_of_get_slot_quirks(host->dev, slot->id);
|
|
|
|
mmc->ops = &dw_mci_ops;
|
|
mmc->f_min = DIV_ROUND_UP(host->bus_hz, 510);
|
|
mmc->f_max = host->bus_hz;
|
|
|
|
if (host->pdata->get_ocr)
|
|
mmc->ocr_avail = host->pdata->get_ocr(id);
|
|
else
|
|
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
|
|
/*
|
|
* Start with slot power disabled, it will be enabled when a card
|
|
* is detected.
|
|
*/
|
|
if (host->pdata->setpower)
|
|
host->pdata->setpower(id, 0);
|
|
|
|
if (host->pdata->caps)
|
|
mmc->caps = host->pdata->caps;
|
|
|
|
if (host->pdata->pm_caps)
|
|
mmc->pm_caps = host->pdata->pm_caps;
|
|
|
|
if (host->dev->of_node) {
|
|
ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
|
|
if (ctrl_id < 0)
|
|
ctrl_id = 0;
|
|
} else {
|
|
ctrl_id = to_platform_device(host->dev)->id;
|
|
}
|
|
if (drv_data && drv_data->caps)
|
|
mmc->caps |= drv_data->caps[ctrl_id];
|
|
|
|
if (host->pdata->caps2)
|
|
mmc->caps2 = host->pdata->caps2;
|
|
|
|
if (host->pdata->get_bus_wd)
|
|
bus_width = host->pdata->get_bus_wd(slot->id);
|
|
else if (host->dev->of_node)
|
|
bus_width = dw_mci_of_get_bus_wd(host->dev, slot->id);
|
|
else
|
|
bus_width = 1;
|
|
|
|
if (drv_data && drv_data->setup_bus) {
|
|
struct device_node *slot_np;
|
|
slot_np = dw_mci_of_find_slot_node(host->dev, slot->id);
|
|
ret = drv_data->setup_bus(host, slot_np, bus_width);
|
|
if (ret)
|
|
goto err_setup_bus;
|
|
}
|
|
|
|
switch (bus_width) {
|
|
case 8:
|
|
mmc->caps |= MMC_CAP_8_BIT_DATA;
|
|
case 4:
|
|
mmc->caps |= MMC_CAP_4_BIT_DATA;
|
|
}
|
|
|
|
if (host->pdata->quirks & DW_MCI_QUIRK_HIGHSPEED)
|
|
mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
|
|
|
|
if (host->pdata->blk_settings) {
|
|
mmc->max_segs = host->pdata->blk_settings->max_segs;
|
|
mmc->max_blk_size = host->pdata->blk_settings->max_blk_size;
|
|
mmc->max_blk_count = host->pdata->blk_settings->max_blk_count;
|
|
mmc->max_req_size = host->pdata->blk_settings->max_req_size;
|
|
mmc->max_seg_size = host->pdata->blk_settings->max_seg_size;
|
|
} else {
|
|
/* Useful defaults if platform data is unset. */
|
|
#ifdef CONFIG_MMC_DW_IDMAC
|
|
mmc->max_segs = host->ring_size;
|
|
mmc->max_blk_size = 65536;
|
|
mmc->max_blk_count = host->ring_size;
|
|
mmc->max_seg_size = 0x1000;
|
|
mmc->max_req_size = mmc->max_seg_size * mmc->max_blk_count;
|
|
#else
|
|
mmc->max_segs = 64;
|
|
mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */
|
|
mmc->max_blk_count = 512;
|
|
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
|
|
mmc->max_seg_size = mmc->max_req_size;
|
|
#endif /* CONFIG_MMC_DW_IDMAC */
|
|
}
|
|
|
|
host->vmmc = devm_regulator_get(mmc_dev(mmc), "vmmc");
|
|
if (IS_ERR(host->vmmc)) {
|
|
pr_info("%s: no vmmc regulator found\n", mmc_hostname(mmc));
|
|
host->vmmc = NULL;
|
|
} else
|
|
regulator_enable(host->vmmc);
|
|
|
|
if (dw_mci_get_cd(mmc))
|
|
set_bit(DW_MMC_CARD_PRESENT, &slot->flags);
|
|
else
|
|
clear_bit(DW_MMC_CARD_PRESENT, &slot->flags);
|
|
|
|
slot->wp_gpio = dw_mci_of_get_wp_gpio(host->dev, slot->id);
|
|
|
|
ret = mmc_add_host(mmc);
|
|
if (ret)
|
|
goto err_setup_bus;
|
|
|
|
#if defined(CONFIG_DEBUG_FS)
|
|
dw_mci_init_debugfs(slot);
|
|
#endif
|
|
|
|
/* Card initially undetected */
|
|
slot->last_detect_state = 0;
|
|
|
|
/*
|
|
* Card may have been plugged in prior to boot so we
|
|
* need to run the detect tasklet
|
|
*/
|
|
queue_work(host->card_workqueue, &host->card_work);
|
|
|
|
return 0;
|
|
|
|
err_setup_bus:
|
|
mmc_free_host(mmc);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
|
|
{
|
|
/* Shutdown detect IRQ */
|
|
if (slot->host->pdata->exit)
|
|
slot->host->pdata->exit(id);
|
|
|
|
/* Debugfs stuff is cleaned up by mmc core */
|
|
mmc_remove_host(slot->mmc);
|
|
slot->host->slot[id] = NULL;
|
|
mmc_free_host(slot->mmc);
|
|
}
|
|
|
|
static void dw_mci_init_dma(struct dw_mci *host)
|
|
{
|
|
/* Alloc memory for sg translation */
|
|
host->sg_cpu = dmam_alloc_coherent(host->dev, PAGE_SIZE,
|
|
&host->sg_dma, GFP_KERNEL);
|
|
if (!host->sg_cpu) {
|
|
dev_err(host->dev, "%s: could not alloc DMA memory\n",
|
|
__func__);
|
|
goto no_dma;
|
|
}
|
|
|
|
/* Determine which DMA interface to use */
|
|
#ifdef CONFIG_MMC_DW_IDMAC
|
|
host->dma_ops = &dw_mci_idmac_ops;
|
|
dev_info(host->dev, "Using internal DMA controller.\n");
|
|
#endif
|
|
|
|
if (!host->dma_ops)
|
|
goto no_dma;
|
|
|
|
if (host->dma_ops->init && host->dma_ops->start &&
|
|
host->dma_ops->stop && host->dma_ops->cleanup) {
|
|
if (host->dma_ops->init(host)) {
|
|
dev_err(host->dev, "%s: Unable to initialize "
|
|
"DMA Controller.\n", __func__);
|
|
goto no_dma;
|
|
}
|
|
} else {
|
|
dev_err(host->dev, "DMA initialization not found.\n");
|
|
goto no_dma;
|
|
}
|
|
|
|
host->use_dma = 1;
|
|
return;
|
|
|
|
no_dma:
|
|
dev_info(host->dev, "Using PIO mode.\n");
|
|
host->use_dma = 0;
|
|
return;
|
|
}
|
|
|
|
static bool mci_wait_reset(struct device *dev, struct dw_mci *host)
|
|
{
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(500);
|
|
unsigned int ctrl;
|
|
|
|
mci_writel(host, CTRL, (SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET |
|
|
SDMMC_CTRL_DMA_RESET));
|
|
|
|
/* wait till resets clear */
|
|
do {
|
|
ctrl = mci_readl(host, CTRL);
|
|
if (!(ctrl & (SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET |
|
|
SDMMC_CTRL_DMA_RESET)))
|
|
return true;
|
|
} while (time_before(jiffies, timeout));
|
|
|
|
dev_err(dev, "Timeout resetting block (ctrl %#x)\n", ctrl);
|
|
|
|
return false;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static struct dw_mci_of_quirks {
|
|
char *quirk;
|
|
int id;
|
|
} of_quirks[] = {
|
|
{
|
|
.quirk = "supports-highspeed",
|
|
.id = DW_MCI_QUIRK_HIGHSPEED,
|
|
}, {
|
|
.quirk = "broken-cd",
|
|
.id = DW_MCI_QUIRK_BROKEN_CARD_DETECTION,
|
|
},
|
|
};
|
|
|
|
static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
|
|
{
|
|
struct dw_mci_board *pdata;
|
|
struct device *dev = host->dev;
|
|
struct device_node *np = dev->of_node;
|
|
const struct dw_mci_drv_data *drv_data = host->drv_data;
|
|
int idx, ret;
|
|
|
|
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
|
|
if (!pdata) {
|
|
dev_err(dev, "could not allocate memory for pdata\n");
|
|
return ERR_PTR(-ENOMEM);
|
|
}
|
|
|
|
/* find out number of slots supported */
|
|
if (of_property_read_u32(dev->of_node, "num-slots",
|
|
&pdata->num_slots)) {
|
|
dev_info(dev, "num-slots property not found, "
|
|
"assuming 1 slot is available\n");
|
|
pdata->num_slots = 1;
|
|
}
|
|
|
|
/* get quirks */
|
|
for (idx = 0; idx < ARRAY_SIZE(of_quirks); idx++)
|
|
if (of_get_property(np, of_quirks[idx].quirk, NULL))
|
|
pdata->quirks |= of_quirks[idx].id;
|
|
|
|
if (of_property_read_u32(np, "fifo-depth", &pdata->fifo_depth))
|
|
dev_info(dev, "fifo-depth property not found, using "
|
|
"value of FIFOTH register as default\n");
|
|
|
|
of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms);
|
|
|
|
if (drv_data && drv_data->parse_dt) {
|
|
ret = drv_data->parse_dt(host);
|
|
if (ret)
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
if (of_find_property(np, "keep-power-in-suspend", NULL))
|
|
pdata->pm_caps |= MMC_PM_KEEP_POWER;
|
|
|
|
if (of_find_property(np, "enable-sdio-wakeup", NULL))
|
|
pdata->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
|
|
|
|
return pdata;
|
|
}
|
|
|
|
#else /* CONFIG_OF */
|
|
static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
|
|
{
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
#endif /* CONFIG_OF */
|
|
|
|
int dw_mci_probe(struct dw_mci *host)
|
|
{
|
|
const struct dw_mci_drv_data *drv_data = host->drv_data;
|
|
int width, i, ret = 0;
|
|
u32 fifo_size;
|
|
int init_slots = 0;
|
|
|
|
if (!host->pdata) {
|
|
host->pdata = dw_mci_parse_dt(host);
|
|
if (IS_ERR(host->pdata)) {
|
|
dev_err(host->dev, "platform data not available\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (!host->pdata->select_slot && host->pdata->num_slots > 1) {
|
|
dev_err(host->dev,
|
|
"Platform data must supply select_slot function\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
host->biu_clk = devm_clk_get(host->dev, "biu");
|
|
if (IS_ERR(host->biu_clk)) {
|
|
dev_dbg(host->dev, "biu clock not available\n");
|
|
} else {
|
|
ret = clk_prepare_enable(host->biu_clk);
|
|
if (ret) {
|
|
dev_err(host->dev, "failed to enable biu clock\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
host->ciu_clk = devm_clk_get(host->dev, "ciu");
|
|
if (IS_ERR(host->ciu_clk)) {
|
|
dev_dbg(host->dev, "ciu clock not available\n");
|
|
} else {
|
|
ret = clk_prepare_enable(host->ciu_clk);
|
|
if (ret) {
|
|
dev_err(host->dev, "failed to enable ciu clock\n");
|
|
goto err_clk_biu;
|
|
}
|
|
}
|
|
|
|
if (IS_ERR(host->ciu_clk))
|
|
host->bus_hz = host->pdata->bus_hz;
|
|
else
|
|
host->bus_hz = clk_get_rate(host->ciu_clk);
|
|
|
|
if (drv_data && drv_data->setup_clock) {
|
|
ret = drv_data->setup_clock(host);
|
|
if (ret) {
|
|
dev_err(host->dev,
|
|
"implementation specific clock setup failed\n");
|
|
goto err_clk_ciu;
|
|
}
|
|
}
|
|
|
|
if (!host->bus_hz) {
|
|
dev_err(host->dev,
|
|
"Platform data must supply bus speed\n");
|
|
ret = -ENODEV;
|
|
goto err_clk_ciu;
|
|
}
|
|
|
|
host->quirks = host->pdata->quirks;
|
|
|
|
spin_lock_init(&host->lock);
|
|
INIT_LIST_HEAD(&host->queue);
|
|
|
|
/*
|
|
* Get the host data width - this assumes that HCON has been set with
|
|
* the correct values.
|
|
*/
|
|
i = (mci_readl(host, HCON) >> 7) & 0x7;
|
|
if (!i) {
|
|
host->push_data = dw_mci_push_data16;
|
|
host->pull_data = dw_mci_pull_data16;
|
|
width = 16;
|
|
host->data_shift = 1;
|
|
} else if (i == 2) {
|
|
host->push_data = dw_mci_push_data64;
|
|
host->pull_data = dw_mci_pull_data64;
|
|
width = 64;
|
|
host->data_shift = 3;
|
|
} else {
|
|
/* Check for a reserved value, and warn if it is */
|
|
WARN((i != 1),
|
|
"HCON reports a reserved host data width!\n"
|
|
"Defaulting to 32-bit access.\n");
|
|
host->push_data = dw_mci_push_data32;
|
|
host->pull_data = dw_mci_pull_data32;
|
|
width = 32;
|
|
host->data_shift = 2;
|
|
}
|
|
|
|
/* Reset all blocks */
|
|
if (!mci_wait_reset(host->dev, host))
|
|
return -ENODEV;
|
|
|
|
host->dma_ops = host->pdata->dma_ops;
|
|
dw_mci_init_dma(host);
|
|
|
|
/* Clear the interrupts for the host controller */
|
|
mci_writel(host, RINTSTS, 0xFFFFFFFF);
|
|
mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */
|
|
|
|
/* Put in max timeout */
|
|
mci_writel(host, TMOUT, 0xFFFFFFFF);
|
|
|
|
/*
|
|
* FIFO threshold settings RxMark = fifo_size / 2 - 1,
|
|
* Tx Mark = fifo_size / 2 DMA Size = 8
|
|
*/
|
|
if (!host->pdata->fifo_depth) {
|
|
/*
|
|
* Power-on value of RX_WMark is FIFO_DEPTH-1, but this may
|
|
* have been overwritten by the bootloader, just like we're
|
|
* about to do, so if you know the value for your hardware, you
|
|
* should put it in the platform data.
|
|
*/
|
|
fifo_size = mci_readl(host, FIFOTH);
|
|
fifo_size = 1 + ((fifo_size >> 16) & 0xfff);
|
|
} else {
|
|
fifo_size = host->pdata->fifo_depth;
|
|
}
|
|
host->fifo_depth = fifo_size;
|
|
host->fifoth_val = ((0x2 << 28) | ((fifo_size/2 - 1) << 16) |
|
|
((fifo_size/2) << 0));
|
|
mci_writel(host, FIFOTH, host->fifoth_val);
|
|
|
|
/* disable clock to CIU */
|
|
mci_writel(host, CLKENA, 0);
|
|
mci_writel(host, CLKSRC, 0);
|
|
|
|
/*
|
|
* In 2.40a spec, Data offset is changed.
|
|
* Need to check the version-id and set data-offset for DATA register.
|
|
*/
|
|
host->verid = SDMMC_GET_VERID(mci_readl(host, VERID));
|
|
dev_info(host->dev, "Version ID is %04x\n", host->verid);
|
|
|
|
if (host->verid < DW_MMC_240A)
|
|
host->data_offset = DATA_OFFSET;
|
|
else
|
|
host->data_offset = DATA_240A_OFFSET;
|
|
|
|
tasklet_init(&host->tasklet, dw_mci_tasklet_func, (unsigned long)host);
|
|
host->card_workqueue = alloc_workqueue("dw-mci-card",
|
|
WQ_MEM_RECLAIM | WQ_NON_REENTRANT, 1);
|
|
if (!host->card_workqueue)
|
|
goto err_dmaunmap;
|
|
INIT_WORK(&host->card_work, dw_mci_work_routine_card);
|
|
ret = devm_request_irq(host->dev, host->irq, dw_mci_interrupt,
|
|
host->irq_flags, "dw-mci", host);
|
|
if (ret)
|
|
goto err_workqueue;
|
|
|
|
if (host->pdata->num_slots)
|
|
host->num_slots = host->pdata->num_slots;
|
|
else
|
|
host->num_slots = ((mci_readl(host, HCON) >> 1) & 0x1F) + 1;
|
|
|
|
/*
|
|
* Enable interrupts for command done, data over, data empty, card det,
|
|
* receive ready and error such as transmit, receive timeout, crc error
|
|
*/
|
|
mci_writel(host, RINTSTS, 0xFFFFFFFF);
|
|
mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER |
|
|
SDMMC_INT_TXDR | SDMMC_INT_RXDR |
|
|
DW_MCI_ERROR_FLAGS | SDMMC_INT_CD);
|
|
mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); /* Enable mci interrupt */
|
|
|
|
dev_info(host->dev, "DW MMC controller at irq %d, "
|
|
"%d bit host data width, "
|
|
"%u deep fifo\n",
|
|
host->irq, width, fifo_size);
|
|
|
|
/* We need at least one slot to succeed */
|
|
for (i = 0; i < host->num_slots; i++) {
|
|
ret = dw_mci_init_slot(host, i);
|
|
if (ret)
|
|
dev_dbg(host->dev, "slot %d init failed\n", i);
|
|
else
|
|
init_slots++;
|
|
}
|
|
|
|
if (init_slots) {
|
|
dev_info(host->dev, "%d slots initialized\n", init_slots);
|
|
} else {
|
|
dev_dbg(host->dev, "attempted to initialize %d slots, "
|
|
"but failed on all\n", host->num_slots);
|
|
goto err_workqueue;
|
|
}
|
|
|
|
if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO)
|
|
dev_info(host->dev, "Internal DMAC interrupt fix enabled.\n");
|
|
|
|
return 0;
|
|
|
|
err_workqueue:
|
|
destroy_workqueue(host->card_workqueue);
|
|
|
|
err_dmaunmap:
|
|
if (host->use_dma && host->dma_ops->exit)
|
|
host->dma_ops->exit(host);
|
|
|
|
if (host->vmmc)
|
|
regulator_disable(host->vmmc);
|
|
|
|
err_clk_ciu:
|
|
if (!IS_ERR(host->ciu_clk))
|
|
clk_disable_unprepare(host->ciu_clk);
|
|
|
|
err_clk_biu:
|
|
if (!IS_ERR(host->biu_clk))
|
|
clk_disable_unprepare(host->biu_clk);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(dw_mci_probe);
|
|
|
|
void dw_mci_remove(struct dw_mci *host)
|
|
{
|
|
int i;
|
|
|
|
mci_writel(host, RINTSTS, 0xFFFFFFFF);
|
|
mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */
|
|
|
|
for (i = 0; i < host->num_slots; i++) {
|
|
dev_dbg(host->dev, "remove slot %d\n", i);
|
|
if (host->slot[i])
|
|
dw_mci_cleanup_slot(host->slot[i], i);
|
|
}
|
|
|
|
/* disable clock to CIU */
|
|
mci_writel(host, CLKENA, 0);
|
|
mci_writel(host, CLKSRC, 0);
|
|
|
|
destroy_workqueue(host->card_workqueue);
|
|
|
|
if (host->use_dma && host->dma_ops->exit)
|
|
host->dma_ops->exit(host);
|
|
|
|
if (host->vmmc)
|
|
regulator_disable(host->vmmc);
|
|
|
|
if (!IS_ERR(host->ciu_clk))
|
|
clk_disable_unprepare(host->ciu_clk);
|
|
|
|
if (!IS_ERR(host->biu_clk))
|
|
clk_disable_unprepare(host->biu_clk);
|
|
}
|
|
EXPORT_SYMBOL(dw_mci_remove);
|
|
|
|
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
/*
|
|
* TODO: we should probably disable the clock to the card in the suspend path.
|
|
*/
|
|
int dw_mci_suspend(struct dw_mci *host)
|
|
{
|
|
int i, ret = 0;
|
|
|
|
for (i = 0; i < host->num_slots; i++) {
|
|
struct dw_mci_slot *slot = host->slot[i];
|
|
if (!slot)
|
|
continue;
|
|
ret = mmc_suspend_host(slot->mmc);
|
|
if (ret < 0) {
|
|
while (--i >= 0) {
|
|
slot = host->slot[i];
|
|
if (slot)
|
|
mmc_resume_host(host->slot[i]->mmc);
|
|
}
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (host->vmmc)
|
|
regulator_disable(host->vmmc);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(dw_mci_suspend);
|
|
|
|
int dw_mci_resume(struct dw_mci *host)
|
|
{
|
|
int i, ret;
|
|
|
|
if (host->vmmc)
|
|
regulator_enable(host->vmmc);
|
|
|
|
if (!mci_wait_reset(host->dev, host)) {
|
|
ret = -ENODEV;
|
|
return ret;
|
|
}
|
|
|
|
if (host->use_dma && host->dma_ops->init)
|
|
host->dma_ops->init(host);
|
|
|
|
/* Restore the old value at FIFOTH register */
|
|
mci_writel(host, FIFOTH, host->fifoth_val);
|
|
|
|
mci_writel(host, RINTSTS, 0xFFFFFFFF);
|
|
mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER |
|
|
SDMMC_INT_TXDR | SDMMC_INT_RXDR |
|
|
DW_MCI_ERROR_FLAGS | SDMMC_INT_CD);
|
|
mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE);
|
|
|
|
for (i = 0; i < host->num_slots; i++) {
|
|
struct dw_mci_slot *slot = host->slot[i];
|
|
if (!slot)
|
|
continue;
|
|
if (slot->mmc->pm_flags & MMC_PM_KEEP_POWER) {
|
|
dw_mci_set_ios(slot->mmc, &slot->mmc->ios);
|
|
dw_mci_setup_bus(slot, true);
|
|
}
|
|
|
|
ret = mmc_resume_host(host->slot[i]->mmc);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(dw_mci_resume);
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static int __init dw_mci_init(void)
|
|
{
|
|
printk(KERN_INFO "Synopsys Designware Multimedia Card Interface Driver");
|
|
return 0;
|
|
}
|
|
|
|
static void __exit dw_mci_exit(void)
|
|
{
|
|
}
|
|
|
|
module_init(dw_mci_init);
|
|
module_exit(dw_mci_exit);
|
|
|
|
MODULE_DESCRIPTION("DW Multimedia Card Interface driver");
|
|
MODULE_AUTHOR("NXP Semiconductor VietNam");
|
|
MODULE_AUTHOR("Imagination Technologies Ltd");
|
|
MODULE_LICENSE("GPL v2");
|