mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-25 21:24:08 +08:00
8ac9d71d60
During development the define J1939_PGN_ADDRESS_REQUEST was renamed to
J1939_PGN_REQUEST. It was forgotten to adjust the documentation
accordingly.
This patch fixes the name of the symbol.
Reported-by: https://github.com/linux-can/can-utils/issues/159#issuecomment-556538798
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
423 lines
15 KiB
ReStructuredText
423 lines
15 KiB
ReStructuredText
.. SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
|
|
|
===================
|
|
J1939 Documentation
|
|
===================
|
|
|
|
Overview / What Is J1939
|
|
========================
|
|
|
|
SAE J1939 defines a higher layer protocol on CAN. It implements a more
|
|
sophisticated addressing scheme and extends the maximum packet size above 8
|
|
bytes. Several derived specifications exist, which differ from the original
|
|
J1939 on the application level, like MilCAN A, NMEA2000 and especially
|
|
ISO-11783 (ISOBUS). This last one specifies the so-called ETP (Extended
|
|
Transport Protocol) which is has been included in this implementation. This
|
|
results in a maximum packet size of ((2 ^ 24) - 1) * 7 bytes == 111 MiB.
|
|
|
|
Specifications used
|
|
-------------------
|
|
|
|
* SAE J1939-21 : data link layer
|
|
* SAE J1939-81 : network management
|
|
* ISO 11783-6 : Virtual Terminal (Extended Transport Protocol)
|
|
|
|
.. _j1939-motivation:
|
|
|
|
Motivation
|
|
==========
|
|
|
|
Given the fact there's something like SocketCAN with an API similar to BSD
|
|
sockets, we found some reasons to justify a kernel implementation for the
|
|
addressing and transport methods used by J1939.
|
|
|
|
* **Addressing:** when a process on an ECU communicates via J1939, it should
|
|
not necessarily know its source address. Although at least one process per
|
|
ECU should know the source address. Other processes should be able to reuse
|
|
that address. This way, address parameters for different processes
|
|
cooperating for the same ECU, are not duplicated. This way of working is
|
|
closely related to the UNIX concept where programs do just one thing, and do
|
|
it well.
|
|
|
|
* **Dynamic addressing:** Address Claiming in J1939 is time critical.
|
|
Furthermore data transport should be handled properly during the address
|
|
negotiation. Putting this functionality in the kernel eliminates it as a
|
|
requirement for _every_ user space process that communicates via J1939. This
|
|
results in a consistent J1939 bus with proper addressing.
|
|
|
|
* **Transport:** both TP & ETP reuse some PGNs to relay big packets over them.
|
|
Different processes may thus use the same TP & ETP PGNs without actually
|
|
knowing it. The individual TP & ETP sessions _must_ be serialized
|
|
(synchronized) between different processes. The kernel solves this problem
|
|
properly and eliminates the serialization (synchronization) as a requirement
|
|
for _every_ user space process that communicates via J1939.
|
|
|
|
J1939 defines some other features (relaying, gateway, fast packet transport,
|
|
...). In-kernel code for these would not contribute to protocol stability.
|
|
Therefore, these parts are left to user space.
|
|
|
|
The J1939 sockets operate on CAN network devices (see SocketCAN). Any J1939
|
|
user space library operating on CAN raw sockets will still operate properly.
|
|
Since such library does not communicate with the in-kernel implementation, care
|
|
must be taken that these two do not interfere. In practice, this means they
|
|
cannot share ECU addresses. A single ECU (or virtual ECU) address is used by
|
|
the library exclusively, or by the in-kernel system exclusively.
|
|
|
|
J1939 concepts
|
|
==============
|
|
|
|
PGN
|
|
---
|
|
|
|
The PGN (Parameter Group Number) is a number to identify a packet. The PGN
|
|
is composed as follows:
|
|
1 bit : Reserved Bit
|
|
1 bit : Data Page
|
|
8 bits : PF (PDU Format)
|
|
8 bits : PS (PDU Specific)
|
|
|
|
In J1939-21 distinction is made between PDU1 format (where PF < 240) and PDU2
|
|
format (where PF >= 240). Furthermore, when using PDU2 format, the PS-field
|
|
contains a so-called Group Extension, which is part of the PGN. When using PDU2
|
|
format, the Group Extension is set in the PS-field.
|
|
|
|
On the other hand, when using PDU1 format, the PS-field contains a so-called
|
|
Destination Address, which is _not_ part of the PGN. When communicating a PGN
|
|
from user space to kernel (or visa versa) and PDU2 format is used, the PS-field
|
|
of the PGN shall be set to zero. The Destination Address shall be set
|
|
elsewhere.
|
|
|
|
Regarding PGN mapping to 29-bit CAN identifier, the Destination Address shall
|
|
be get/set from/to the appropriate bits of the identifier by the kernel.
|
|
|
|
|
|
Addressing
|
|
----------
|
|
|
|
Both static and dynamic addressing methods can be used.
|
|
|
|
For static addresses, no extra checks are made by the kernel, and provided
|
|
addresses are considered right. This responsibility is for the OEM or system
|
|
integrator.
|
|
|
|
For dynamic addressing, so-called Address Claiming, extra support is foreseen
|
|
in the kernel. In J1939 any ECU is known by it's 64-bit NAME. At the moment of
|
|
a successful address claim, the kernel keeps track of both NAME and source
|
|
address being claimed. This serves as a base for filter schemes. By default,
|
|
packets with a destination that is not locally, will be rejected.
|
|
|
|
Mixed mode packets (from a static to a dynamic address or vice versa) are
|
|
allowed. The BSD sockets define separate API calls for getting/setting the
|
|
local & remote address and are applicable for J1939 sockets.
|
|
|
|
Filtering
|
|
---------
|
|
|
|
J1939 defines white list filters per socket that a user can set in order to
|
|
receive a subset of the J1939 traffic. Filtering can be based on:
|
|
|
|
* SA
|
|
* SOURCE_NAME
|
|
* PGN
|
|
|
|
When multiple filters are in place for a single socket, and a packet comes in
|
|
that matches several of those filters, the packet is only received once for
|
|
that socket.
|
|
|
|
How to Use J1939
|
|
================
|
|
|
|
API Calls
|
|
---------
|
|
|
|
On CAN, you first need to open a socket for communicating over a CAN network.
|
|
To use J1939, #include <linux/can/j1939.h>. From there, <linux/can.h> will be
|
|
included too. To open a socket, use:
|
|
|
|
.. code-block:: C
|
|
|
|
s = socket(PF_CAN, SOCK_DGRAM, CAN_J1939);
|
|
|
|
J1939 does use SOCK_DGRAM sockets. In the J1939 specification, connections are
|
|
mentioned in the context of transport protocol sessions. These still deliver
|
|
packets to the other end (using several CAN packets). SOCK_STREAM is not
|
|
supported.
|
|
|
|
After the successful creation of the socket, you would normally use the bind(2)
|
|
and/or connect(2) system call to bind the socket to a CAN interface. After
|
|
binding and/or connecting the socket, you can read(2) and write(2) from/to the
|
|
socket or use send(2), sendto(2), sendmsg(2) and the recv*() counterpart
|
|
operations on the socket as usual. There are also J1939 specific socket options
|
|
described below.
|
|
|
|
In order to send data, a bind(2) must have been successful. bind(2) assigns a
|
|
local address to a socket.
|
|
|
|
Different from CAN is that the payload data is just the data that get send,
|
|
without it's header info. The header info is derived from the sockaddr supplied
|
|
to bind(2), connect(2), sendto(2) and recvfrom(2). A write(2) with size 4 will
|
|
result in a packet with 4 bytes.
|
|
|
|
The sockaddr structure has extensions for use with J1939 as specified below:
|
|
|
|
.. code-block:: C
|
|
|
|
struct sockaddr_can {
|
|
sa_family_t can_family;
|
|
int can_ifindex;
|
|
union {
|
|
struct {
|
|
__u64 name;
|
|
/* pgn:
|
|
* 8 bit: PS in PDU2 case, else 0
|
|
* 8 bit: PF
|
|
* 1 bit: DP
|
|
* 1 bit: reserved
|
|
*/
|
|
__u32 pgn;
|
|
__u8 addr;
|
|
} j1939;
|
|
} can_addr;
|
|
}
|
|
|
|
can_family & can_ifindex serve the same purpose as for other SocketCAN sockets.
|
|
|
|
can_addr.j1939.pgn specifies the PGN (max 0x3ffff). Individual bits are
|
|
specified above.
|
|
|
|
can_addr.j1939.name contains the 64-bit J1939 NAME.
|
|
|
|
can_addr.j1939.addr contains the address.
|
|
|
|
The bind(2) system call assigns the local address, i.e. the source address when
|
|
sending packages. If a PGN during bind(2) is set, it's used as a RX filter.
|
|
I.e. only packets with a matching PGN are received. If an ADDR or NAME is set
|
|
it is used as a receive filter, too. It will match the destination NAME or ADDR
|
|
of the incoming packet. The NAME filter will work only if appropriate Address
|
|
Claiming for this name was done on the CAN bus and registered/cached by the
|
|
kernel.
|
|
|
|
On the other hand connect(2) assigns the remote address, i.e. the destination
|
|
address. The PGN from connect(2) is used as the default PGN when sending
|
|
packets. If ADDR or NAME is set it will be used as the default destination ADDR
|
|
or NAME. Further a set ADDR or NAME during connect(2) is used as a receive
|
|
filter. It will match the source NAME or ADDR of the incoming packet.
|
|
|
|
Both write(2) and send(2) will send a packet with local address from bind(2) and
|
|
the remote address from connect(2). Use sendto(2) to overwrite the destination
|
|
address.
|
|
|
|
If can_addr.j1939.name is set (!= 0) the NAME is looked up by the kernel and
|
|
the corresponding ADDR is used. If can_addr.j1939.name is not set (== 0),
|
|
can_addr.j1939.addr is used.
|
|
|
|
When creating a socket, reasonable defaults are set. Some options can be
|
|
modified with setsockopt(2) & getsockopt(2).
|
|
|
|
RX path related options:
|
|
|
|
- SO_J1939_FILTER - configure array of filters
|
|
- SO_J1939_PROMISC - disable filters set by bind(2) and connect(2)
|
|
|
|
By default no broadcast packets can be send or received. To enable sending or
|
|
receiving broadcast packets use the socket option SO_BROADCAST:
|
|
|
|
.. code-block:: C
|
|
|
|
int value = 1;
|
|
setsockopt(sock, SOL_SOCKET, SO_BROADCAST, &value, sizeof(value));
|
|
|
|
The following diagram illustrates the RX path:
|
|
|
|
.. code::
|
|
|
|
+--------------------+
|
|
| incoming packet |
|
|
+--------------------+
|
|
|
|
|
V
|
|
+--------------------+
|
|
| SO_J1939_PROMISC? |
|
|
+--------------------+
|
|
| |
|
|
no | | yes
|
|
| |
|
|
.---------' `---------.
|
|
| |
|
|
+---------------------------+ |
|
|
| bind() + connect() + | |
|
|
| SOCK_BROADCAST filter | |
|
|
+---------------------------+ |
|
|
| |
|
|
|<---------------------'
|
|
V
|
|
+---------------------------+
|
|
| SO_J1939_FILTER |
|
|
+---------------------------+
|
|
|
|
|
V
|
|
+---------------------------+
|
|
| socket recv() |
|
|
+---------------------------+
|
|
|
|
TX path related options:
|
|
SO_J1939_SEND_PRIO - change default send priority for the socket
|
|
|
|
Message Flags during send() and Related System Calls
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
send(2), sendto(2) and sendmsg(2) take a 'flags' argument. Currently
|
|
supported flags are:
|
|
|
|
* MSG_DONTWAIT, i.e. non-blocking operation.
|
|
|
|
recvmsg(2)
|
|
^^^^^^^^^^
|
|
|
|
In most cases recvmsg(2) is needed if you want to extract more information than
|
|
recvfrom(2) can provide. For example package priority and timestamp. The
|
|
Destination Address, name and packet priority (if applicable) are attached to
|
|
the msghdr in the recvmsg(2) call. They can be extracted using cmsg(3) macros,
|
|
with cmsg_level == SOL_J1939 && cmsg_type == SCM_J1939_DEST_ADDR,
|
|
SCM_J1939_DEST_NAME or SCM_J1939_PRIO. The returned data is a uint8_t for
|
|
priority and dst_addr, and uint64_t for dst_name.
|
|
|
|
.. code-block:: C
|
|
|
|
uint8_t priority, dst_addr;
|
|
uint64_t dst_name;
|
|
|
|
for (cmsg = CMSG_FIRSTHDR(&msg); cmsg; cmsg = CMSG_NXTHDR(&msg, cmsg)) {
|
|
switch (cmsg->cmsg_level) {
|
|
case SOL_CAN_J1939:
|
|
if (cmsg->cmsg_type == SCM_J1939_DEST_ADDR)
|
|
dst_addr = *CMSG_DATA(cmsg);
|
|
else if (cmsg->cmsg_type == SCM_J1939_DEST_NAME)
|
|
memcpy(&dst_name, CMSG_DATA(cmsg), cmsg->cmsg_len - CMSG_LEN(0));
|
|
else if (cmsg->cmsg_type == SCM_J1939_PRIO)
|
|
priority = *CMSG_DATA(cmsg);
|
|
break;
|
|
}
|
|
}
|
|
|
|
Dynamic Addressing
|
|
------------------
|
|
|
|
Distinction has to be made between using the claimed address and doing an
|
|
address claim. To use an already claimed address, one has to fill in the
|
|
j1939.name member and provide it to bind(2). If the name had claimed an address
|
|
earlier, all further messages being sent will use that address. And the
|
|
j1939.addr member will be ignored.
|
|
|
|
An exception on this is PGN 0x0ee00. This is the "Address Claim/Cannot Claim
|
|
Address" message and the kernel will use the j1939.addr member for that PGN if
|
|
necessary.
|
|
|
|
To claim an address following code example can be used:
|
|
|
|
.. code-block:: C
|
|
|
|
struct sockaddr_can baddr = {
|
|
.can_family = AF_CAN,
|
|
.can_addr.j1939 = {
|
|
.name = name,
|
|
.addr = J1939_IDLE_ADDR,
|
|
.pgn = J1939_NO_PGN, /* to disable bind() rx filter for PGN */
|
|
},
|
|
.can_ifindex = if_nametoindex("can0"),
|
|
};
|
|
|
|
bind(sock, (struct sockaddr *)&baddr, sizeof(baddr));
|
|
|
|
/* for Address Claiming broadcast must be allowed */
|
|
int value = 1;
|
|
setsockopt(sock, SOL_SOCKET, SO_BROADCAST, &value, sizeof(value));
|
|
|
|
/* configured advanced RX filter with PGN needed for Address Claiming */
|
|
const struct j1939_filter filt[] = {
|
|
{
|
|
.pgn = J1939_PGN_ADDRESS_CLAIMED,
|
|
.pgn_mask = J1939_PGN_PDU1_MAX,
|
|
}, {
|
|
.pgn = J1939_PGN_REQUEST,
|
|
.pgn_mask = J1939_PGN_PDU1_MAX,
|
|
}, {
|
|
.pgn = J1939_PGN_ADDRESS_COMMANDED,
|
|
.pgn_mask = J1939_PGN_MAX,
|
|
},
|
|
};
|
|
|
|
setsockopt(sock, SOL_CAN_J1939, SO_J1939_FILTER, &filt, sizeof(filt));
|
|
|
|
uint64_t dat = htole64(name);
|
|
const struct sockaddr_can saddr = {
|
|
.can_family = AF_CAN,
|
|
.can_addr.j1939 = {
|
|
.pgn = J1939_PGN_ADDRESS_CLAIMED,
|
|
.addr = J1939_NO_ADDR,
|
|
},
|
|
};
|
|
|
|
/* Afterwards do a sendto(2) with data set to the NAME (Little Endian). If the
|
|
* NAME provided, does not match the j1939.name provided to bind(2), EPROTO
|
|
* will be returned.
|
|
*/
|
|
sendto(sock, dat, sizeof(dat), 0, (const struct sockaddr *)&saddr, sizeof(saddr));
|
|
|
|
If no-one else contests the address claim within 250ms after transmission, the
|
|
kernel marks the NAME-SA assignment as valid. The valid assignment will be kept
|
|
among other valid NAME-SA assignments. From that point, any socket bound to the
|
|
NAME can send packets.
|
|
|
|
If another ECU claims the address, the kernel will mark the NAME-SA expired.
|
|
No socket bound to the NAME can send packets (other than address claims). To
|
|
claim another address, some socket bound to NAME, must bind(2) again, but with
|
|
only j1939.addr changed to the new SA, and must then send a valid address claim
|
|
packet. This restarts the state machine in the kernel (and any other
|
|
participant on the bus) for this NAME.
|
|
|
|
can-utils also include the jacd tool, so it can be used as code example or as
|
|
default Address Claiming daemon.
|
|
|
|
Send Examples
|
|
-------------
|
|
|
|
Static Addressing
|
|
^^^^^^^^^^^^^^^^^
|
|
|
|
This example will send a PGN (0x12300) from SA 0x20 to DA 0x30.
|
|
|
|
Bind:
|
|
|
|
.. code-block:: C
|
|
|
|
struct sockaddr_can baddr = {
|
|
.can_family = AF_CAN,
|
|
.can_addr.j1939 = {
|
|
.name = J1939_NO_NAME,
|
|
.addr = 0x20,
|
|
.pgn = J1939_NO_PGN,
|
|
},
|
|
.can_ifindex = if_nametoindex("can0"),
|
|
};
|
|
|
|
bind(sock, (struct sockaddr *)&baddr, sizeof(baddr));
|
|
|
|
Now, the socket 'sock' is bound to the SA 0x20. Since no connect(2) was called,
|
|
at this point we can use only sendto(2) or sendmsg(2).
|
|
|
|
Send:
|
|
|
|
.. code-block:: C
|
|
|
|
const struct sockaddr_can saddr = {
|
|
.can_family = AF_CAN,
|
|
.can_addr.j1939 = {
|
|
.name = J1939_NO_NAME;
|
|
.pgn = 0x30,
|
|
.addr = 0x12300,
|
|
},
|
|
};
|
|
|
|
sendto(sock, dat, sizeof(dat), 0, (const struct sockaddr *)&saddr, sizeof(saddr));
|