linux/drivers/iio/dac/cio-dac.c
Greg Kroah-Hartman fba51482b6 1st set of IIO new device support, features and cleanups for the 6.4 cycle.
New device support
 * bosch,bmp280
   - Add support for BMP580 - includes significant refactoring and general
     driver cleanup + support for non-volatile memory for trimming and config
     parameters.
 * rohm BU27034
   - New driver for this 3 channel ambient light sensor.
   - New support library for devices where both integration time and
     amplifier gain are configurable.  In these cases a scale change
     may require changing bother underlying values. This library module
     provides code to help with this.
 * st,accel
   - Add support for IIS328DQ (ID only as compatible wtih LIS331DL)
 * st,lsm6dsx
   - Add support for ASM330LHB automotive MEMS sensor.
 * ti,ads1100, ads1000
   - New driver for these 16 bit ADCs.
 * ti,tmp117
   - Add support for older tmp116 device. Includes some general driver cleanup.
 
 Staging driver drops
 * adi,ade7854
   - Driver was a very long way from compliant with IIO infrastructure and ABI.
     If anyone wants a non staging version of this driver they are better off
     starting from scratch. Hence drop it and the associated meter.h header.
 
 Features
 * adi,ad7441r
   - Add DT binding to set sink current for digital input.
 * semtech,sx9324,9360
   - Support older register mapping from firmware designed for windows.
 
 Core improvements.
 * Move iio_trigger_poll() docs to next to the implementation and add a note
   on expected caller context.
 * Rename iio_trigger_poll_chained() to iio_trigger_poll_nested() so
   as to use more standard / common terminology.
 * Improve main ABI docs references to offset and scale for raw values by
   making them consistent and clear.
 
 Cleanups and minor fixes:
 * adi,ad5592r
   - Add GPIO names - useful for debug.
 * adi,ad7441r
   - Fix current input, loop powered mode configuration setup.
 * adi,adis16475
   - Fix wrong commented value for minimum advised lower rate.
 * adi,admv1013
   - Use devm_clk_get_enabled() to reduce boilerplate.
 * adi,ads1210
   - Fix wrong bits for writing config register (late fix and has
     been broken a long time so not rushed upstream)
 * amlogic,meson-saradc
   - Improve cleanup in error handling if BL30 handshake fails.
 * apex-embedded,stx104
   - Migrate to regmap and use regmap_read_poll_timeout() to neatly handle
     retries.
   - Add local mutex to close various races.
   - Use define U16_MAX rather than value for limit.
   - Improve code readability with minor reorganization.
 * atmel,ad91-sama5d2
   - Drop trivial dead code.
 * kionix,kx022a
   - Drop unused structure element.
 * linear,ltc2983
   - Reorganize bindings doc to enable unevaluatedProperties to be set
     in one place for all child nodes.
   - Make binding for adi,custom-thermocouple accept signed values.
 * maxim,max44000
   - Add OF Device matching (of_match_table was not correctly set).
 * maxim,max5522
   - Missing static
 * measurement-computing,cio-dac
   - Fix wrong part name in comments.
   - Migrate to regmap.
   - Improve includes by replacing bitops.h with more direct bits.h
 * qcom,pm8xxx-xoadc
   - Remove a check that can never fail.
 * renesas,rcar-gyroadc
   - DT binding documentation improvements.
   - Tidy up an unused warning with __maybe_unused.
 * semtech,sx_common
   - Drop docs for a structure element that doesn't exist.
 * semtech,sx9500
   - Drop ACPI_PTR() and of_match_ptr() protections that just complicate
     the code / block some firmware registration types that would otherwise
     work.
 * sensiron,sps30
   - Comment formatting tidy up.
 * st,sensors
   - Drop duplicate text in DT binding.
 * st,stm32-adc
   - Add some missing static markings.
 * ti,ads1100
   - Use correct return code in dev_err_probe() call.
 * x-powers,axp20x_adc - precursor series to simplify addition of AXP192.
   - General code cleanup / minor refactoring for better readabilty of code.
   - Switch from boolean value to mask for adc_en2 field to avoid hard coding
     a mask that will be different in AXP192
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmQ0QiIRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0Foh8dhAAlUDsEWKoYc2DMXs//UVh5ortcD/tVMDj
 +Oe6c92vTvZaritF9JN5fS5oO48d2Qx7VC8mIZvsCgLdloYtM8qns8KwPU8W589j
 Mdaq2e/p+CCVLxn+RttiINk7C/okXmc6nh21TABYgaHbi1Yzu0LooTobrdd5GHZX
 l+5n8diTgebkKWLKHtR/Wo0hZVdFtrxOb+bP6Lu+yjwUhlvmnuC18OPthDHBwss1
 3nWL5sAR8DWKTKPwmWl1pnn5fuZXxAnxYhsgzMiC/dNrv4GfjV76xFvwdFG97Qc4
 Qifo/t6AM6g7HplfRjtdGXGnew8RBj9jzw3W8NUzb/7UF0ywF+6KHBrgWVKLumsW
 uGsLGQsOoCVmycnppUZSZV0eI5qT+WS6GT0XucB3wlUriS56YgpMU/RVo9iE8yUd
 VqjacBJrh1SUIPQKXAGb1dlrfgxGRUFcDxea/XuqzXZIn4U3JM1wb0awIlfcrTNm
 4EdVH9r6lwU/7KcrVC10iZz5ZMFy15wNmCl4+Sn56QNIekXYMXFCHsoZs64UMuhU
 leczQdEp/wEG1p0mWdrpC4aEsMfK27RSbTh8AS3LiPHqI9FD+Jg+wULF6wpMIHvY
 rm4kxlznTdKsYOiHsOkYXCi06kS5k2SqQHtbKS3jiSsCw30eX6xzVjG8szivFIS5
 KEKqxRs1BxM=
 =xxs6
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

1st set of IIO new device support, features and cleanups for the 6.4 cycle.

New device support
* bosch,bmp280
  - Add support for BMP580 - includes significant refactoring and general
    driver cleanup + support for non-volatile memory for trimming and config
    parameters.
* rohm BU27034
  - New driver for this 3 channel ambient light sensor.
  - New support library for devices where both integration time and
    amplifier gain are configurable.  In these cases a scale change
    may require changing bother underlying values. This library module
    provides code to help with this.
* st,accel
  - Add support for IIS328DQ (ID only as compatible wtih LIS331DL)
* st,lsm6dsx
  - Add support for ASM330LHB automotive MEMS sensor.
* ti,ads1100, ads1000
  - New driver for these 16 bit ADCs.
* ti,tmp117
  - Add support for older tmp116 device. Includes some general driver cleanup.

Staging driver drops
* adi,ade7854
  - Driver was a very long way from compliant with IIO infrastructure and ABI.
    If anyone wants a non staging version of this driver they are better off
    starting from scratch. Hence drop it and the associated meter.h header.

Features
* adi,ad7441r
  - Add DT binding to set sink current for digital input.
* semtech,sx9324,9360
  - Support older register mapping from firmware designed for windows.

Core improvements.
* Move iio_trigger_poll() docs to next to the implementation and add a note
  on expected caller context.
* Rename iio_trigger_poll_chained() to iio_trigger_poll_nested() so
  as to use more standard / common terminology.
* Improve main ABI docs references to offset and scale for raw values by
  making them consistent and clear.

Cleanups and minor fixes:
* adi,ad5592r
  - Add GPIO names - useful for debug.
* adi,ad7441r
  - Fix current input, loop powered mode configuration setup.
* adi,adis16475
  - Fix wrong commented value for minimum advised lower rate.
* adi,admv1013
  - Use devm_clk_get_enabled() to reduce boilerplate.
* adi,ads1210
  - Fix wrong bits for writing config register (late fix and has
    been broken a long time so not rushed upstream)
* amlogic,meson-saradc
  - Improve cleanup in error handling if BL30 handshake fails.
* apex-embedded,stx104
  - Migrate to regmap and use regmap_read_poll_timeout() to neatly handle
    retries.
  - Add local mutex to close various races.
  - Use define U16_MAX rather than value for limit.
  - Improve code readability with minor reorganization.
* atmel,ad91-sama5d2
  - Drop trivial dead code.
* kionix,kx022a
  - Drop unused structure element.
* linear,ltc2983
  - Reorganize bindings doc to enable unevaluatedProperties to be set
    in one place for all child nodes.
  - Make binding for adi,custom-thermocouple accept signed values.
* maxim,max44000
  - Add OF Device matching (of_match_table was not correctly set).
* maxim,max5522
  - Missing static
* measurement-computing,cio-dac
  - Fix wrong part name in comments.
  - Migrate to regmap.
  - Improve includes by replacing bitops.h with more direct bits.h
* qcom,pm8xxx-xoadc
  - Remove a check that can never fail.
* renesas,rcar-gyroadc
  - DT binding documentation improvements.
  - Tidy up an unused warning with __maybe_unused.
* semtech,sx_common
  - Drop docs for a structure element that doesn't exist.
* semtech,sx9500
  - Drop ACPI_PTR() and of_match_ptr() protections that just complicate
    the code / block some firmware registration types that would otherwise
    work.
* sensiron,sps30
  - Comment formatting tidy up.
* st,sensors
  - Drop duplicate text in DT binding.
* st,stm32-adc
  - Add some missing static markings.
* ti,ads1100
  - Use correct return code in dev_err_probe() call.
* x-powers,axp20x_adc - precursor series to simplify addition of AXP192.
  - General code cleanup / minor refactoring for better readabilty of code.
  - Switch from boolean value to mask for adc_en2 field to avoid hard coding
    a mask that will be different in AXP192

* tag 'iio-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (63 commits)
  MAINTAINERS: Add ROHM BU27034
  iio: light: ROHM BU27034 Ambient Light Sensor
  dt-bindings: iio: light: Support ROHM BU27034
  MAINTAINERS: Add IIO gain-time-scale helpers
  iio: light: Add gain-time-scale helpers
  doc: Make sysfs-bus-iio doc more exact
  iio: dac: set variable max5522_channels storage-class-specifier to static
  dt-bindings: iio: temperature: ltc2983: Make 'adi,custom-thermocouple' signed
  dt-bindings: iio: temperature: ltc2983: Fix child node unevaluated properties
  iio: addac: stx104: Use regmap_read_poll_timeout() for conversion poll
  iio: addac: stx104: Migrate to the regmap API
  iio: addac: stx104: Improve indentation in stx104_write_raw()
  iio: addac: stx104: Use define rather than hardcoded limit for write val
  iio: addac: stx104: Fix race condition when converting analog-to-digital
  iio: addac: stx104: Fix race condition for stx104_write_raw()
  dt-bindings: iio: st-sensors: Fix repeated text
  staging: iio: resolver: ads1210: fix config mode
  iio: adc: ti-ads1100: fix error code in probe()
  iio: accel: add support for IIS328DQ variant
  dt-bindings: iio: st-sensors: Add IIS328DQ accelerometer
  ...
2023-04-12 09:45:34 +02:00

162 lines
4.2 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* IIO driver for the Measurement Computing CIO-DAC
* Copyright (C) 2016 William Breathitt Gray
*
* This driver supports the following Measurement Computing devices: CIO-DAC16,
* CIO-DAC08, and PC104-DAC06.
*/
#include <linux/bits.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/iio/iio.h>
#include <linux/iio/types.h>
#include <linux/isa.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/regmap.h>
#include <linux/types.h>
#define CIO_DAC_NUM_CHAN 16
#define CIO_DAC_CHAN(chan) { \
.type = IIO_VOLTAGE, \
.channel = chan, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.indexed = 1, \
.output = 1 \
}
#define CIO_DAC_EXTENT 32
static unsigned int base[max_num_isa_dev(CIO_DAC_EXTENT)];
static unsigned int num_cio_dac;
module_param_hw_array(base, uint, ioport, &num_cio_dac, 0);
MODULE_PARM_DESC(base, "Measurement Computing CIO-DAC base addresses");
#define CIO_DAC_BASE 0x00
#define CIO_DAC_CHANNEL_STRIDE 2
static bool cio_dac_precious_reg(struct device *dev, unsigned int reg)
{
/*
* All registers are considered precious; if the XFER jumper is set on
* the device, then no update occurs until a DAC register is read.
*/
return true;
}
static const struct regmap_config cio_dac_regmap_config = {
.reg_bits = 16,
.reg_stride = 2,
.val_bits = 16,
.io_port = true,
.max_register = 0x1F,
.precious_reg = cio_dac_precious_reg,
};
/**
* struct cio_dac_iio - IIO device private data structure
* @map: Regmap for the device
*/
struct cio_dac_iio {
struct regmap *map;
};
static int cio_dac_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val, int *val2, long mask)
{
struct cio_dac_iio *const priv = iio_priv(indio_dev);
const unsigned int offset = chan->channel * CIO_DAC_CHANNEL_STRIDE;
int err;
unsigned int dac_val;
if (mask != IIO_CHAN_INFO_RAW)
return -EINVAL;
err = regmap_read(priv->map, CIO_DAC_BASE + offset, &dac_val);
if (err)
return err;
*val = dac_val;
return IIO_VAL_INT;
}
static int cio_dac_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int val, int val2, long mask)
{
struct cio_dac_iio *const priv = iio_priv(indio_dev);
const unsigned int offset = chan->channel * CIO_DAC_CHANNEL_STRIDE;
if (mask != IIO_CHAN_INFO_RAW)
return -EINVAL;
/* DAC can only accept up to a 12-bit value */
if ((unsigned int)val > 4095)
return -EINVAL;
return regmap_write(priv->map, CIO_DAC_BASE + offset, val);
}
static const struct iio_info cio_dac_info = {
.read_raw = cio_dac_read_raw,
.write_raw = cio_dac_write_raw
};
static const struct iio_chan_spec cio_dac_channels[CIO_DAC_NUM_CHAN] = {
CIO_DAC_CHAN(0), CIO_DAC_CHAN(1), CIO_DAC_CHAN(2), CIO_DAC_CHAN(3),
CIO_DAC_CHAN(4), CIO_DAC_CHAN(5), CIO_DAC_CHAN(6), CIO_DAC_CHAN(7),
CIO_DAC_CHAN(8), CIO_DAC_CHAN(9), CIO_DAC_CHAN(10), CIO_DAC_CHAN(11),
CIO_DAC_CHAN(12), CIO_DAC_CHAN(13), CIO_DAC_CHAN(14), CIO_DAC_CHAN(15)
};
static int cio_dac_probe(struct device *dev, unsigned int id)
{
struct iio_dev *indio_dev;
struct cio_dac_iio *priv;
void __iomem *regs;
indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
if (!indio_dev)
return -ENOMEM;
if (!devm_request_region(dev, base[id], CIO_DAC_EXTENT,
dev_name(dev))) {
dev_err(dev, "Unable to request port addresses (0x%X-0x%X)\n",
base[id], base[id] + CIO_DAC_EXTENT);
return -EBUSY;
}
regs = devm_ioport_map(dev, base[id], CIO_DAC_EXTENT);
if (!regs)
return -ENOMEM;
priv = iio_priv(indio_dev);
priv->map = devm_regmap_init_mmio(dev, regs, &cio_dac_regmap_config);
if (IS_ERR(priv->map))
return dev_err_probe(dev, PTR_ERR(priv->map),
"Unable to initialize register map\n");
indio_dev->info = &cio_dac_info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = cio_dac_channels;
indio_dev->num_channels = CIO_DAC_NUM_CHAN;
indio_dev->name = dev_name(dev);
return devm_iio_device_register(dev, indio_dev);
}
static struct isa_driver cio_dac_driver = {
.probe = cio_dac_probe,
.driver = {
.name = "cio-dac"
}
};
module_isa_driver(cio_dac_driver, num_cio_dac);
MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
MODULE_DESCRIPTION("Measurement Computing CIO-DAC IIO driver");
MODULE_LICENSE("GPL v2");