mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-28 22:54:05 +08:00
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
98 lines
2.9 KiB
Plaintext
98 lines
2.9 KiB
Plaintext
Getting started quick
|
|
---------------------
|
|
|
|
- Select packet support in the block device section and UDF support in
|
|
the file system section.
|
|
|
|
- Compile and install kernel and modules, reboot.
|
|
|
|
- You need the udftools package (pktsetup, mkudffs, cdrwtool).
|
|
Download from http://sourceforge.net/projects/linux-udf/
|
|
|
|
- Grab a new CD-RW disc and format it (assuming CD-RW is hdc, substitute
|
|
as appropriate):
|
|
# cdrwtool -d /dev/hdc -q
|
|
|
|
- Setup your writer
|
|
# pktsetup dev_name /dev/hdc
|
|
|
|
- Now you can mount /dev/pktcdvd/dev_name and copy files to it. Enjoy!
|
|
# mount /dev/pktcdvd/dev_name /cdrom -t udf -o rw,noatime
|
|
|
|
|
|
Packet writing for DVD-RW media
|
|
-------------------------------
|
|
|
|
DVD-RW discs can be written to much like CD-RW discs if they are in
|
|
the so called "restricted overwrite" mode. To put a disc in restricted
|
|
overwrite mode, run:
|
|
|
|
# dvd+rw-format /dev/hdc
|
|
|
|
You can then use the disc the same way you would use a CD-RW disc:
|
|
|
|
# pktsetup dev_name /dev/hdc
|
|
# mount /dev/pktcdvd/dev_name /cdrom -t udf -o rw,noatime
|
|
|
|
|
|
Packet writing for DVD+RW media
|
|
-------------------------------
|
|
|
|
According to the DVD+RW specification, a drive supporting DVD+RW discs
|
|
shall implement "true random writes with 2KB granularity", which means
|
|
that it should be possible to put any filesystem with a block size >=
|
|
2KB on such a disc. For example, it should be possible to do:
|
|
|
|
# dvd+rw-format /dev/hdc (only needed if the disc has never
|
|
been formatted)
|
|
# mkudffs /dev/hdc
|
|
# mount /dev/hdc /cdrom -t udf -o rw,noatime
|
|
|
|
However, some drives don't follow the specification and expect the
|
|
host to perform aligned writes at 32KB boundaries. Other drives do
|
|
follow the specification, but suffer bad performance problems if the
|
|
writes are not 32KB aligned.
|
|
|
|
Both problems can be solved by using the pktcdvd driver, which always
|
|
generates aligned writes.
|
|
|
|
# dvd+rw-format /dev/hdc
|
|
# pktsetup dev_name /dev/hdc
|
|
# mkudffs /dev/pktcdvd/dev_name
|
|
# mount /dev/pktcdvd/dev_name /cdrom -t udf -o rw,noatime
|
|
|
|
|
|
Packet writing for DVD-RAM media
|
|
--------------------------------
|
|
|
|
DVD-RAM discs are random writable, so using the pktcdvd driver is not
|
|
necessary. However, using the pktcdvd driver can improve performance
|
|
in the same way it does for DVD+RW media.
|
|
|
|
|
|
Notes
|
|
-----
|
|
|
|
- CD-RW media can usually not be overwritten more than about 1000
|
|
times, so to avoid unnecessary wear on the media, you should always
|
|
use the noatime mount option.
|
|
|
|
- Defect management (ie automatic remapping of bad sectors) has not
|
|
been implemented yet, so you are likely to get at least some
|
|
filesystem corruption if the disc wears out.
|
|
|
|
- Since the pktcdvd driver makes the disc appear as a regular block
|
|
device with a 2KB block size, you can put any filesystem you like on
|
|
the disc. For example, run:
|
|
|
|
# /sbin/mke2fs /dev/pktcdvd/dev_name
|
|
|
|
to create an ext2 filesystem on the disc.
|
|
|
|
|
|
Links
|
|
-----
|
|
|
|
See http://fy.chalmers.se/~appro/linux/DVD+RW/ for more information
|
|
about DVD writing.
|