mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-27 21:14:44 +08:00
ce9a53eb3d
There are several scenarios that keyboard can NOT wake up system from suspend, e.g., if a keyboard is depressed between system device suspend phase and device noirq suspend phase, the keyboard ISR will be called and both keyboard depress and release interrupts will be disabled, then keyboard will no longer be able to wake up system. Another scenario would be, if a keyboard is kept depressed, and then system goes into suspend, the expected behavior would be when keyboard is released, system will be waked up, but current implementation can NOT achieve that, because both depress and release interrupts are disabled in ISR, and the event check is still in progress. To fix these issues, need to make sure keyboard's depress or release interrupt is enabled after noirq device suspend phase, this patch moves the suspend/resume callback to noirq suspend/resume phase, and enable the corresponding interrupt according to current keyboard status. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
599 lines
16 KiB
C
599 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
//
|
|
// Driver for the IMX keypad port.
|
|
// Copyright (C) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/input/matrix_keypad.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/timer.h>
|
|
|
|
/*
|
|
* Keypad Controller registers (halfword)
|
|
*/
|
|
#define KPCR 0x00 /* Keypad Control Register */
|
|
|
|
#define KPSR 0x02 /* Keypad Status Register */
|
|
#define KBD_STAT_KPKD (0x1 << 0) /* Key Press Interrupt Status bit (w1c) */
|
|
#define KBD_STAT_KPKR (0x1 << 1) /* Key Release Interrupt Status bit (w1c) */
|
|
#define KBD_STAT_KDSC (0x1 << 2) /* Key Depress Synch Chain Status bit (w1c)*/
|
|
#define KBD_STAT_KRSS (0x1 << 3) /* Key Release Synch Status bit (w1c)*/
|
|
#define KBD_STAT_KDIE (0x1 << 8) /* Key Depress Interrupt Enable Status bit */
|
|
#define KBD_STAT_KRIE (0x1 << 9) /* Key Release Interrupt Enable */
|
|
#define KBD_STAT_KPPEN (0x1 << 10) /* Keypad Clock Enable */
|
|
|
|
#define KDDR 0x04 /* Keypad Data Direction Register */
|
|
#define KPDR 0x06 /* Keypad Data Register */
|
|
|
|
#define MAX_MATRIX_KEY_ROWS 8
|
|
#define MAX_MATRIX_KEY_COLS 8
|
|
#define MATRIX_ROW_SHIFT 3
|
|
|
|
#define MAX_MATRIX_KEY_NUM (MAX_MATRIX_KEY_ROWS * MAX_MATRIX_KEY_COLS)
|
|
|
|
struct imx_keypad {
|
|
|
|
struct clk *clk;
|
|
struct input_dev *input_dev;
|
|
void __iomem *mmio_base;
|
|
|
|
int irq;
|
|
struct timer_list check_matrix_timer;
|
|
|
|
/*
|
|
* The matrix is stable only if no changes are detected after
|
|
* IMX_KEYPAD_SCANS_FOR_STABILITY scans
|
|
*/
|
|
#define IMX_KEYPAD_SCANS_FOR_STABILITY 3
|
|
int stable_count;
|
|
|
|
bool enabled;
|
|
|
|
/* Masks for enabled rows/cols */
|
|
unsigned short rows_en_mask;
|
|
unsigned short cols_en_mask;
|
|
|
|
unsigned short keycodes[MAX_MATRIX_KEY_NUM];
|
|
|
|
/*
|
|
* Matrix states:
|
|
* -stable: achieved after a complete debounce process.
|
|
* -unstable: used in the debouncing process.
|
|
*/
|
|
unsigned short matrix_stable_state[MAX_MATRIX_KEY_COLS];
|
|
unsigned short matrix_unstable_state[MAX_MATRIX_KEY_COLS];
|
|
};
|
|
|
|
/* Scan the matrix and return the new state in *matrix_volatile_state. */
|
|
static void imx_keypad_scan_matrix(struct imx_keypad *keypad,
|
|
unsigned short *matrix_volatile_state)
|
|
{
|
|
int col;
|
|
unsigned short reg_val;
|
|
|
|
for (col = 0; col < MAX_MATRIX_KEY_COLS; col++) {
|
|
if ((keypad->cols_en_mask & (1 << col)) == 0)
|
|
continue;
|
|
/*
|
|
* Discharge keypad capacitance:
|
|
* 2. write 1s on column data.
|
|
* 3. configure columns as totem-pole to discharge capacitance.
|
|
* 4. configure columns as open-drain.
|
|
*/
|
|
reg_val = readw(keypad->mmio_base + KPDR);
|
|
reg_val |= 0xff00;
|
|
writew(reg_val, keypad->mmio_base + KPDR);
|
|
|
|
reg_val = readw(keypad->mmio_base + KPCR);
|
|
reg_val &= ~((keypad->cols_en_mask & 0xff) << 8);
|
|
writew(reg_val, keypad->mmio_base + KPCR);
|
|
|
|
udelay(2);
|
|
|
|
reg_val = readw(keypad->mmio_base + KPCR);
|
|
reg_val |= (keypad->cols_en_mask & 0xff) << 8;
|
|
writew(reg_val, keypad->mmio_base + KPCR);
|
|
|
|
/*
|
|
* 5. Write a single column to 0, others to 1.
|
|
* 6. Sample row inputs and save data.
|
|
* 7. Repeat steps 2 - 6 for remaining columns.
|
|
*/
|
|
reg_val = readw(keypad->mmio_base + KPDR);
|
|
reg_val &= ~(1 << (8 + col));
|
|
writew(reg_val, keypad->mmio_base + KPDR);
|
|
|
|
/*
|
|
* Delay added to avoid propagating the 0 from column to row
|
|
* when scanning.
|
|
*/
|
|
udelay(5);
|
|
|
|
/*
|
|
* 1s in matrix_volatile_state[col] means key pressures
|
|
* throw data from non enabled rows.
|
|
*/
|
|
reg_val = readw(keypad->mmio_base + KPDR);
|
|
matrix_volatile_state[col] = (~reg_val) & keypad->rows_en_mask;
|
|
}
|
|
|
|
/*
|
|
* Return in standby mode:
|
|
* 9. write 0s to columns
|
|
*/
|
|
reg_val = readw(keypad->mmio_base + KPDR);
|
|
reg_val &= 0x00ff;
|
|
writew(reg_val, keypad->mmio_base + KPDR);
|
|
}
|
|
|
|
/*
|
|
* Compare the new matrix state (volatile) with the stable one stored in
|
|
* keypad->matrix_stable_state and fire events if changes are detected.
|
|
*/
|
|
static void imx_keypad_fire_events(struct imx_keypad *keypad,
|
|
unsigned short *matrix_volatile_state)
|
|
{
|
|
struct input_dev *input_dev = keypad->input_dev;
|
|
int row, col;
|
|
|
|
for (col = 0; col < MAX_MATRIX_KEY_COLS; col++) {
|
|
unsigned short bits_changed;
|
|
int code;
|
|
|
|
if ((keypad->cols_en_mask & (1 << col)) == 0)
|
|
continue; /* Column is not enabled */
|
|
|
|
bits_changed = keypad->matrix_stable_state[col] ^
|
|
matrix_volatile_state[col];
|
|
|
|
if (bits_changed == 0)
|
|
continue; /* Column does not contain changes */
|
|
|
|
for (row = 0; row < MAX_MATRIX_KEY_ROWS; row++) {
|
|
if ((keypad->rows_en_mask & (1 << row)) == 0)
|
|
continue; /* Row is not enabled */
|
|
if ((bits_changed & (1 << row)) == 0)
|
|
continue; /* Row does not contain changes */
|
|
|
|
code = MATRIX_SCAN_CODE(row, col, MATRIX_ROW_SHIFT);
|
|
input_event(input_dev, EV_MSC, MSC_SCAN, code);
|
|
input_report_key(input_dev, keypad->keycodes[code],
|
|
matrix_volatile_state[col] & (1 << row));
|
|
dev_dbg(&input_dev->dev, "Event code: %d, val: %d",
|
|
keypad->keycodes[code],
|
|
matrix_volatile_state[col] & (1 << row));
|
|
}
|
|
}
|
|
input_sync(input_dev);
|
|
}
|
|
|
|
/*
|
|
* imx_keypad_check_for_events is the timer handler.
|
|
*/
|
|
static void imx_keypad_check_for_events(struct timer_list *t)
|
|
{
|
|
struct imx_keypad *keypad = from_timer(keypad, t, check_matrix_timer);
|
|
unsigned short matrix_volatile_state[MAX_MATRIX_KEY_COLS];
|
|
unsigned short reg_val;
|
|
bool state_changed, is_zero_matrix;
|
|
int i;
|
|
|
|
memset(matrix_volatile_state, 0, sizeof(matrix_volatile_state));
|
|
|
|
imx_keypad_scan_matrix(keypad, matrix_volatile_state);
|
|
|
|
state_changed = false;
|
|
for (i = 0; i < MAX_MATRIX_KEY_COLS; i++) {
|
|
if ((keypad->cols_en_mask & (1 << i)) == 0)
|
|
continue;
|
|
|
|
if (keypad->matrix_unstable_state[i] ^ matrix_volatile_state[i]) {
|
|
state_changed = true;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If the matrix state is changed from the previous scan
|
|
* (Re)Begin the debouncing process, saving the new state in
|
|
* keypad->matrix_unstable_state.
|
|
* else
|
|
* Increase the count of number of scans with a stable state.
|
|
*/
|
|
if (state_changed) {
|
|
memcpy(keypad->matrix_unstable_state, matrix_volatile_state,
|
|
sizeof(matrix_volatile_state));
|
|
keypad->stable_count = 0;
|
|
} else
|
|
keypad->stable_count++;
|
|
|
|
/*
|
|
* If the matrix is not as stable as we want reschedule scan
|
|
* in the near future.
|
|
*/
|
|
if (keypad->stable_count < IMX_KEYPAD_SCANS_FOR_STABILITY) {
|
|
mod_timer(&keypad->check_matrix_timer,
|
|
jiffies + msecs_to_jiffies(10));
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* If the matrix state is stable, fire the events and save the new
|
|
* stable state. Note, if the matrix is kept stable for longer
|
|
* (keypad->stable_count > IMX_KEYPAD_SCANS_FOR_STABILITY) all
|
|
* events have already been generated.
|
|
*/
|
|
if (keypad->stable_count == IMX_KEYPAD_SCANS_FOR_STABILITY) {
|
|
imx_keypad_fire_events(keypad, matrix_volatile_state);
|
|
|
|
memcpy(keypad->matrix_stable_state, matrix_volatile_state,
|
|
sizeof(matrix_volatile_state));
|
|
}
|
|
|
|
is_zero_matrix = true;
|
|
for (i = 0; i < MAX_MATRIX_KEY_COLS; i++) {
|
|
if (matrix_volatile_state[i] != 0) {
|
|
is_zero_matrix = false;
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
if (is_zero_matrix) {
|
|
/*
|
|
* All keys have been released. Enable only the KDI
|
|
* interrupt for future key presses (clear the KDI
|
|
* status bit and its sync chain before that).
|
|
*/
|
|
reg_val = readw(keypad->mmio_base + KPSR);
|
|
reg_val |= KBD_STAT_KPKD | KBD_STAT_KDSC;
|
|
writew(reg_val, keypad->mmio_base + KPSR);
|
|
|
|
reg_val = readw(keypad->mmio_base + KPSR);
|
|
reg_val |= KBD_STAT_KDIE;
|
|
reg_val &= ~KBD_STAT_KRIE;
|
|
writew(reg_val, keypad->mmio_base + KPSR);
|
|
} else {
|
|
/*
|
|
* Some keys are still pressed. Schedule a rescan in
|
|
* attempt to detect multiple key presses and enable
|
|
* the KRI interrupt to react quickly to key release
|
|
* event.
|
|
*/
|
|
mod_timer(&keypad->check_matrix_timer,
|
|
jiffies + msecs_to_jiffies(60));
|
|
|
|
reg_val = readw(keypad->mmio_base + KPSR);
|
|
reg_val |= KBD_STAT_KPKR | KBD_STAT_KRSS;
|
|
writew(reg_val, keypad->mmio_base + KPSR);
|
|
|
|
reg_val = readw(keypad->mmio_base + KPSR);
|
|
reg_val |= KBD_STAT_KRIE;
|
|
reg_val &= ~KBD_STAT_KDIE;
|
|
writew(reg_val, keypad->mmio_base + KPSR);
|
|
}
|
|
}
|
|
|
|
static irqreturn_t imx_keypad_irq_handler(int irq, void *dev_id)
|
|
{
|
|
struct imx_keypad *keypad = dev_id;
|
|
unsigned short reg_val;
|
|
|
|
reg_val = readw(keypad->mmio_base + KPSR);
|
|
|
|
/* Disable both interrupt types */
|
|
reg_val &= ~(KBD_STAT_KRIE | KBD_STAT_KDIE);
|
|
/* Clear interrupts status bits */
|
|
reg_val |= KBD_STAT_KPKR | KBD_STAT_KPKD;
|
|
writew(reg_val, keypad->mmio_base + KPSR);
|
|
|
|
if (keypad->enabled) {
|
|
/* The matrix is supposed to be changed */
|
|
keypad->stable_count = 0;
|
|
|
|
/* Schedule the scanning procedure near in the future */
|
|
mod_timer(&keypad->check_matrix_timer,
|
|
jiffies + msecs_to_jiffies(2));
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void imx_keypad_config(struct imx_keypad *keypad)
|
|
{
|
|
unsigned short reg_val;
|
|
|
|
/*
|
|
* Include enabled rows in interrupt generation (KPCR[7:0])
|
|
* Configure keypad columns as open-drain (KPCR[15:8])
|
|
*/
|
|
reg_val = readw(keypad->mmio_base + KPCR);
|
|
reg_val |= keypad->rows_en_mask & 0xff; /* rows */
|
|
reg_val |= (keypad->cols_en_mask & 0xff) << 8; /* cols */
|
|
writew(reg_val, keypad->mmio_base + KPCR);
|
|
|
|
/* Write 0's to KPDR[15:8] (Colums) */
|
|
reg_val = readw(keypad->mmio_base + KPDR);
|
|
reg_val &= 0x00ff;
|
|
writew(reg_val, keypad->mmio_base + KPDR);
|
|
|
|
/* Configure columns as output, rows as input (KDDR[15:0]) */
|
|
writew(0xff00, keypad->mmio_base + KDDR);
|
|
|
|
/*
|
|
* Clear Key Depress and Key Release status bit.
|
|
* Clear both synchronizer chain.
|
|
*/
|
|
reg_val = readw(keypad->mmio_base + KPSR);
|
|
reg_val |= KBD_STAT_KPKR | KBD_STAT_KPKD |
|
|
KBD_STAT_KDSC | KBD_STAT_KRSS;
|
|
writew(reg_val, keypad->mmio_base + KPSR);
|
|
|
|
/* Enable KDI and disable KRI (avoid false release events). */
|
|
reg_val |= KBD_STAT_KDIE;
|
|
reg_val &= ~KBD_STAT_KRIE;
|
|
writew(reg_val, keypad->mmio_base + KPSR);
|
|
}
|
|
|
|
static void imx_keypad_inhibit(struct imx_keypad *keypad)
|
|
{
|
|
unsigned short reg_val;
|
|
|
|
/* Inhibit KDI and KRI interrupts. */
|
|
reg_val = readw(keypad->mmio_base + KPSR);
|
|
reg_val &= ~(KBD_STAT_KRIE | KBD_STAT_KDIE);
|
|
reg_val |= KBD_STAT_KPKR | KBD_STAT_KPKD;
|
|
writew(reg_val, keypad->mmio_base + KPSR);
|
|
|
|
/* Colums as open drain and disable all rows */
|
|
reg_val = (keypad->cols_en_mask & 0xff) << 8;
|
|
writew(reg_val, keypad->mmio_base + KPCR);
|
|
}
|
|
|
|
static void imx_keypad_close(struct input_dev *dev)
|
|
{
|
|
struct imx_keypad *keypad = input_get_drvdata(dev);
|
|
|
|
dev_dbg(&dev->dev, ">%s\n", __func__);
|
|
|
|
/* Mark keypad as being inactive */
|
|
keypad->enabled = false;
|
|
synchronize_irq(keypad->irq);
|
|
del_timer_sync(&keypad->check_matrix_timer);
|
|
|
|
imx_keypad_inhibit(keypad);
|
|
|
|
/* Disable clock unit */
|
|
clk_disable_unprepare(keypad->clk);
|
|
}
|
|
|
|
static int imx_keypad_open(struct input_dev *dev)
|
|
{
|
|
struct imx_keypad *keypad = input_get_drvdata(dev);
|
|
int error;
|
|
|
|
dev_dbg(&dev->dev, ">%s\n", __func__);
|
|
|
|
/* Enable the kpp clock */
|
|
error = clk_prepare_enable(keypad->clk);
|
|
if (error)
|
|
return error;
|
|
|
|
/* We became active from now */
|
|
keypad->enabled = true;
|
|
|
|
imx_keypad_config(keypad);
|
|
|
|
/* Sanity control, not all the rows must be actived now. */
|
|
if ((readw(keypad->mmio_base + KPDR) & keypad->rows_en_mask) == 0) {
|
|
dev_err(&dev->dev,
|
|
"too many keys pressed, control pins initialisation\n");
|
|
goto open_err;
|
|
}
|
|
|
|
return 0;
|
|
|
|
open_err:
|
|
imx_keypad_close(dev);
|
|
return -EIO;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id imx_keypad_of_match[] = {
|
|
{ .compatible = "fsl,imx21-kpp", },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, imx_keypad_of_match);
|
|
#endif
|
|
|
|
static int imx_keypad_probe(struct platform_device *pdev)
|
|
{
|
|
const struct matrix_keymap_data *keymap_data =
|
|
dev_get_platdata(&pdev->dev);
|
|
struct imx_keypad *keypad;
|
|
struct input_dev *input_dev;
|
|
struct resource *res;
|
|
int irq, error, i, row, col;
|
|
|
|
if (!keymap_data && !pdev->dev.of_node) {
|
|
dev_err(&pdev->dev, "no keymap defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
dev_err(&pdev->dev, "no irq defined in platform data\n");
|
|
return irq;
|
|
}
|
|
|
|
input_dev = devm_input_allocate_device(&pdev->dev);
|
|
if (!input_dev) {
|
|
dev_err(&pdev->dev, "failed to allocate the input device\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad), GFP_KERNEL);
|
|
if (!keypad) {
|
|
dev_err(&pdev->dev, "not enough memory for driver data\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
keypad->input_dev = input_dev;
|
|
keypad->irq = irq;
|
|
keypad->stable_count = 0;
|
|
|
|
timer_setup(&keypad->check_matrix_timer,
|
|
imx_keypad_check_for_events, 0);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
keypad->mmio_base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(keypad->mmio_base))
|
|
return PTR_ERR(keypad->mmio_base);
|
|
|
|
keypad->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(keypad->clk)) {
|
|
dev_err(&pdev->dev, "failed to get keypad clock\n");
|
|
return PTR_ERR(keypad->clk);
|
|
}
|
|
|
|
/* Init the Input device */
|
|
input_dev->name = pdev->name;
|
|
input_dev->id.bustype = BUS_HOST;
|
|
input_dev->dev.parent = &pdev->dev;
|
|
input_dev->open = imx_keypad_open;
|
|
input_dev->close = imx_keypad_close;
|
|
|
|
error = matrix_keypad_build_keymap(keymap_data, NULL,
|
|
MAX_MATRIX_KEY_ROWS,
|
|
MAX_MATRIX_KEY_COLS,
|
|
keypad->keycodes, input_dev);
|
|
if (error) {
|
|
dev_err(&pdev->dev, "failed to build keymap\n");
|
|
return error;
|
|
}
|
|
|
|
/* Search for rows and cols enabled */
|
|
for (row = 0; row < MAX_MATRIX_KEY_ROWS; row++) {
|
|
for (col = 0; col < MAX_MATRIX_KEY_COLS; col++) {
|
|
i = MATRIX_SCAN_CODE(row, col, MATRIX_ROW_SHIFT);
|
|
if (keypad->keycodes[i] != KEY_RESERVED) {
|
|
keypad->rows_en_mask |= 1 << row;
|
|
keypad->cols_en_mask |= 1 << col;
|
|
}
|
|
}
|
|
}
|
|
dev_dbg(&pdev->dev, "enabled rows mask: %x\n", keypad->rows_en_mask);
|
|
dev_dbg(&pdev->dev, "enabled cols mask: %x\n", keypad->cols_en_mask);
|
|
|
|
__set_bit(EV_REP, input_dev->evbit);
|
|
input_set_capability(input_dev, EV_MSC, MSC_SCAN);
|
|
input_set_drvdata(input_dev, keypad);
|
|
|
|
/* Ensure that the keypad will stay dormant until opened */
|
|
error = clk_prepare_enable(keypad->clk);
|
|
if (error)
|
|
return error;
|
|
imx_keypad_inhibit(keypad);
|
|
clk_disable_unprepare(keypad->clk);
|
|
|
|
error = devm_request_irq(&pdev->dev, irq, imx_keypad_irq_handler, 0,
|
|
pdev->name, keypad);
|
|
if (error) {
|
|
dev_err(&pdev->dev, "failed to request IRQ\n");
|
|
return error;
|
|
}
|
|
|
|
/* Register the input device */
|
|
error = input_register_device(input_dev);
|
|
if (error) {
|
|
dev_err(&pdev->dev, "failed to register input device\n");
|
|
return error;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, keypad);
|
|
device_init_wakeup(&pdev->dev, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused imx_kbd_noirq_suspend(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct imx_keypad *kbd = platform_get_drvdata(pdev);
|
|
struct input_dev *input_dev = kbd->input_dev;
|
|
unsigned short reg_val = readw(kbd->mmio_base + KPSR);
|
|
|
|
/* imx kbd can wake up system even clock is disabled */
|
|
mutex_lock(&input_dev->mutex);
|
|
|
|
if (input_dev->users)
|
|
clk_disable_unprepare(kbd->clk);
|
|
|
|
mutex_unlock(&input_dev->mutex);
|
|
|
|
if (device_may_wakeup(&pdev->dev)) {
|
|
if (reg_val & KBD_STAT_KPKD)
|
|
reg_val |= KBD_STAT_KRIE;
|
|
if (reg_val & KBD_STAT_KPKR)
|
|
reg_val |= KBD_STAT_KDIE;
|
|
writew(reg_val, kbd->mmio_base + KPSR);
|
|
|
|
enable_irq_wake(kbd->irq);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused imx_kbd_noirq_resume(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct imx_keypad *kbd = platform_get_drvdata(pdev);
|
|
struct input_dev *input_dev = kbd->input_dev;
|
|
int ret = 0;
|
|
|
|
if (device_may_wakeup(&pdev->dev))
|
|
disable_irq_wake(kbd->irq);
|
|
|
|
mutex_lock(&input_dev->mutex);
|
|
|
|
if (input_dev->users) {
|
|
ret = clk_prepare_enable(kbd->clk);
|
|
if (ret)
|
|
goto err_clk;
|
|
}
|
|
|
|
err_clk:
|
|
mutex_unlock(&input_dev->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct dev_pm_ops imx_kbd_pm_ops = {
|
|
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(imx_kbd_noirq_suspend, imx_kbd_noirq_resume)
|
|
};
|
|
|
|
static struct platform_driver imx_keypad_driver = {
|
|
.driver = {
|
|
.name = "imx-keypad",
|
|
.pm = &imx_kbd_pm_ops,
|
|
.of_match_table = of_match_ptr(imx_keypad_of_match),
|
|
},
|
|
.probe = imx_keypad_probe,
|
|
};
|
|
module_platform_driver(imx_keypad_driver);
|
|
|
|
MODULE_AUTHOR("Alberto Panizzo <maramaopercheseimorto@gmail.com>");
|
|
MODULE_DESCRIPTION("IMX Keypad Port Driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:imx-keypad");
|