linux/arch/arm/mach-omap2/vc.h
Kevin Hilman ce8ebe0dfb OMAP3+: voltage domain: move PMIC struct from vdd_info into struct voltagedomain
Move structure containing PMIC configurable settings into struct
voltagedomain.  In the process, rename from omap_volt_pmic_info to
omap_voltdm_pmic (_info suffix is not helpful.)

No functional changes.

Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15 12:08:57 -07:00

117 lines
3.8 KiB
C

/*
* OMAP3/4 Voltage Controller (VC) structure and macro definitions
*
* Copyright (C) 2007, 2010 Texas Instruments, Inc.
* Rajendra Nayak <rnayak@ti.com>
* Lesly A M <x0080970@ti.com>
* Thara Gopinath <thara@ti.com>
*
* Copyright (C) 2008, 2011 Nokia Corporation
* Kalle Jokiniemi
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*/
#ifndef __ARCH_ARM_MACH_OMAP2_VC_H
#define __ARCH_ARM_MACH_OMAP2_VC_H
#include <linux/kernel.h>
struct voltagedomain;
/**
* struct omap_vc_common - per-VC register/bitfield data
* @cmd_on_mask: ON bitmask in PRM_VC_CMD_VAL* register
* @valid: VALID bitmask in PRM_VC_BYPASS_VAL register
* @smps_sa_reg: Offset of PRM_VC_SMPS_SA reg from PRM start
* @smps_volra_reg: Offset of PRM_VC_SMPS_VOL_RA reg from PRM start
* @smps_cmdra_reg: Offset of PRM_VC_SMPS_CMD_RA reg from PRM start
* @bypass_val_reg: Offset of PRM_VC_BYPASS_VAL reg from PRM start
* @data_shift: DATA field shift in PRM_VC_BYPASS_VAL register
* @slaveaddr_shift: SLAVEADDR field shift in PRM_VC_BYPASS_VAL register
* @regaddr_shift: REGADDR field shift in PRM_VC_BYPASS_VAL register
* @cmd_on_shift: ON field shift in PRM_VC_CMD_VAL_* register
* @cmd_onlp_shift: ONLP field shift in PRM_VC_CMD_VAL_* register
* @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register
* @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register
* @cfg_channel_reg: VC channel configuration register
*
* XXX One of cmd_on_mask and cmd_on_shift are not needed
* XXX VALID should probably be a shift, not a mask
*/
struct omap_vc_common {
u32 cmd_on_mask;
u32 valid;
u8 smps_sa_reg;
u8 smps_volra_reg;
u8 smps_cmdra_reg;
u8 bypass_val_reg;
u8 data_shift;
u8 slaveaddr_shift;
u8 regaddr_shift;
u8 cmd_on_shift;
u8 cmd_onlp_shift;
u8 cmd_ret_shift;
u8 cmd_off_shift;
u8 cfg_channel_reg;
};
/* omap_vc_channel.flags values */
#define OMAP_VC_CHANNEL_DEFAULT BIT(0)
/**
* struct omap_vc_channel - VC per-instance data
* @i2c_slave_addr: I2C slave address of PMIC for this VC channel
* @volt_reg_addr: voltage configuration register address
* @cmd_reg_addr: command configuration register address
* @setup_time: setup time (in sys_clk cycles) of regulator for this channel
* @cfg_channel: current value of VC channel configuration register
*
* @common: pointer to VC common data for this platform
* @smps_sa_mask: i2c slave address bitmask in the PRM_VC_SMPS_SA register
* @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register
* @smps_cmdra_mask: CMDRA* bitmask in the PRM_VC_CMD_RA register
* @cmdval_reg: register for on/ret/off voltage level values for this channel
* @cfg_channel_sa_shift: bit shift for slave address cfg_channel register
* @flags: VC channel-specific flags (optional)
*/
struct omap_vc_channel {
/* channel state */
u16 i2c_slave_addr;
u16 volt_reg_addr;
u16 cmd_reg_addr;
u16 setup_time;
u8 cfg_channel;
/* register access data */
const struct omap_vc_common *common;
u32 smps_sa_mask;
u32 smps_volra_mask;
u32 smps_cmdra_mask;
u8 cmdval_reg;
u8 cfg_channel_sa_shift;
u8 flags;
};
extern struct omap_vc_channel omap3_vc_mpu;
extern struct omap_vc_channel omap3_vc_core;
extern struct omap_vc_channel omap4_vc_mpu;
extern struct omap_vc_channel omap4_vc_iva;
extern struct omap_vc_channel omap4_vc_core;
void omap_vc_init_channel(struct voltagedomain *voltdm);
int omap_vc_pre_scale(struct voltagedomain *voltdm,
unsigned long target_volt,
u8 *target_vsel, u8 *current_vsel);
void omap_vc_post_scale(struct voltagedomain *voltdm,
unsigned long target_volt,
u8 target_vsel, u8 current_vsel);
int omap_vc_bypass_scale(struct voltagedomain *voltdm,
unsigned long target_volt);
#endif