mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-18 01:34:14 +08:00
aff0c42a78
This patch adds driver for mxl301rf OFDM tuner chips. It is used as an ISDB-T tuner in earthsoft pt3 cards. Note that this driver does not initilize the chip, because the initilization sequence / register setting is not disclosed. Thus, the driver assumes that the chips are initilized externally by its parent board driver before tuner_ops->init() are called, like in PT3 driver where the bridge chip contains the init sequence in its private memory and provides a command to trigger the sequence. Signed-off-by: Akihiro Tsukada <tskd08@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
350 lines
8.0 KiB
C
350 lines
8.0 KiB
C
/*
|
|
* MaxLinear MxL301RF OFDM tuner driver
|
|
*
|
|
* Copyright (C) 2014 Akihiro Tsukada <tskd08@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation version 2.
|
|
*
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
/*
|
|
* NOTICE:
|
|
* This driver is incomplete and lacks init/config of the chips,
|
|
* as the necessary info is not disclosed.
|
|
* Other features like get_if_frequency() are missing as well.
|
|
* It assumes that users of this driver (such as a PCI bridge of
|
|
* DTV receiver cards) properly init and configure the chip
|
|
* via I2C *before* calling this driver's init() function.
|
|
*
|
|
* Currently, PT3 driver is the only one that uses this driver,
|
|
* and contains init/config code in its firmware.
|
|
* Thus some part of the code might be dependent on PT3 specific config.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include "mxl301rf.h"
|
|
|
|
struct mxl301rf_state {
|
|
struct mxl301rf_config cfg;
|
|
struct i2c_client *i2c;
|
|
};
|
|
|
|
static struct mxl301rf_state *cfg_to_state(struct mxl301rf_config *c)
|
|
{
|
|
return container_of(c, struct mxl301rf_state, cfg);
|
|
}
|
|
|
|
static int raw_write(struct mxl301rf_state *state, const u8 *buf, int len)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_master_send(state->i2c, buf, len);
|
|
if (ret >= 0 && ret < len)
|
|
ret = -EIO;
|
|
return (ret == len) ? 0 : ret;
|
|
}
|
|
|
|
static int reg_write(struct mxl301rf_state *state, u8 reg, u8 val)
|
|
{
|
|
u8 buf[2] = { reg, val };
|
|
|
|
return raw_write(state, buf, 2);
|
|
}
|
|
|
|
static int reg_read(struct mxl301rf_state *state, u8 reg, u8 *val)
|
|
{
|
|
u8 wbuf[2] = { 0xfb, reg };
|
|
int ret;
|
|
|
|
ret = raw_write(state, wbuf, sizeof(wbuf));
|
|
if (ret == 0)
|
|
ret = i2c_master_recv(state->i2c, val, 1);
|
|
if (ret >= 0 && ret < 1)
|
|
ret = -EIO;
|
|
return (ret == 1) ? 0 : ret;
|
|
}
|
|
|
|
/* tuner_ops */
|
|
|
|
/* get RSSI and update propery cache, set to *out in % */
|
|
static int mxl301rf_get_rf_strength(struct dvb_frontend *fe, u16 *out)
|
|
{
|
|
struct mxl301rf_state *state;
|
|
int ret;
|
|
u8 rf_in1, rf_in2, rf_off1, rf_off2;
|
|
u16 rf_in, rf_off;
|
|
s64 level;
|
|
struct dtv_fe_stats *rssi;
|
|
|
|
rssi = &fe->dtv_property_cache.strength;
|
|
rssi->len = 1;
|
|
rssi->stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
*out = 0;
|
|
|
|
state = fe->tuner_priv;
|
|
ret = reg_write(state, 0x14, 0x01);
|
|
if (ret < 0)
|
|
return ret;
|
|
usleep_range(1000, 2000);
|
|
|
|
ret = reg_read(state, 0x18, &rf_in1);
|
|
if (ret == 0)
|
|
ret = reg_read(state, 0x19, &rf_in2);
|
|
if (ret == 0)
|
|
ret = reg_read(state, 0xd6, &rf_off1);
|
|
if (ret == 0)
|
|
ret = reg_read(state, 0xd7, &rf_off2);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
rf_in = (rf_in2 & 0x07) << 8 | rf_in1;
|
|
rf_off = (rf_off2 & 0x0f) << 5 | (rf_off1 >> 3);
|
|
level = rf_in - rf_off - (113 << 3); /* x8 dBm */
|
|
level = level * 1000 / 8;
|
|
rssi->stat[0].svalue = level;
|
|
rssi->stat[0].scale = FE_SCALE_DECIBEL;
|
|
/* *out = (level - min) * 100 / (max - min) */
|
|
*out = (rf_in - rf_off + (1 << 9) - 1) * 100 / ((5 << 9) - 2);
|
|
return 0;
|
|
}
|
|
|
|
/* spur shift parameters */
|
|
struct shf {
|
|
u32 freq; /* Channel center frequency */
|
|
u32 ofst_th; /* Offset frequency threshold */
|
|
u8 shf_val; /* Spur shift value */
|
|
u8 shf_dir; /* Spur shift direction */
|
|
};
|
|
|
|
static const struct shf shf_tab[] = {
|
|
{ 64500, 500, 0x92, 0x07 },
|
|
{ 191500, 300, 0xe2, 0x07 },
|
|
{ 205500, 500, 0x2c, 0x04 },
|
|
{ 212500, 500, 0x1e, 0x04 },
|
|
{ 226500, 500, 0xd4, 0x07 },
|
|
{ 99143, 500, 0x9c, 0x07 },
|
|
{ 173143, 500, 0xd4, 0x07 },
|
|
{ 191143, 300, 0xd4, 0x07 },
|
|
{ 207143, 500, 0xce, 0x07 },
|
|
{ 225143, 500, 0xce, 0x07 },
|
|
{ 243143, 500, 0xd4, 0x07 },
|
|
{ 261143, 500, 0xd4, 0x07 },
|
|
{ 291143, 500, 0xd4, 0x07 },
|
|
{ 339143, 500, 0x2c, 0x04 },
|
|
{ 117143, 500, 0x7a, 0x07 },
|
|
{ 135143, 300, 0x7a, 0x07 },
|
|
{ 153143, 500, 0x01, 0x07 }
|
|
};
|
|
|
|
struct reg_val {
|
|
u8 reg;
|
|
u8 val;
|
|
} __attribute__ ((__packed__));
|
|
|
|
static const struct reg_val set_idac[] = {
|
|
{ 0x0d, 0x00 },
|
|
{ 0x0c, 0x67 },
|
|
{ 0x6f, 0x89 },
|
|
{ 0x70, 0x0c },
|
|
{ 0x6f, 0x8a },
|
|
{ 0x70, 0x0e },
|
|
{ 0x6f, 0x8b },
|
|
{ 0x70, 0x1c },
|
|
};
|
|
|
|
static int mxl301rf_set_params(struct dvb_frontend *fe)
|
|
{
|
|
struct reg_val tune0[] = {
|
|
{ 0x13, 0x00 }, /* abort tuning */
|
|
{ 0x3b, 0xc0 },
|
|
{ 0x3b, 0x80 },
|
|
{ 0x10, 0x95 }, /* BW */
|
|
{ 0x1a, 0x05 },
|
|
{ 0x61, 0x00 }, /* spur shift value (placeholder) */
|
|
{ 0x62, 0xa0 } /* spur shift direction (placeholder) */
|
|
};
|
|
|
|
struct reg_val tune1[] = {
|
|
{ 0x11, 0x40 }, /* RF frequency L (placeholder) */
|
|
{ 0x12, 0x0e }, /* RF frequency H (placeholder) */
|
|
{ 0x13, 0x01 } /* start tune */
|
|
};
|
|
|
|
struct mxl301rf_state *state;
|
|
u32 freq;
|
|
u16 f;
|
|
u32 tmp, div;
|
|
int i, ret;
|
|
|
|
state = fe->tuner_priv;
|
|
freq = fe->dtv_property_cache.frequency;
|
|
|
|
/* spur shift function (for analog) */
|
|
for (i = 0; i < ARRAY_SIZE(shf_tab); i++) {
|
|
if (freq >= (shf_tab[i].freq - shf_tab[i].ofst_th) * 1000 &&
|
|
freq <= (shf_tab[i].freq + shf_tab[i].ofst_th) * 1000) {
|
|
tune0[5].val = shf_tab[i].shf_val;
|
|
tune0[6].val = 0xa0 | shf_tab[i].shf_dir;
|
|
break;
|
|
}
|
|
}
|
|
ret = raw_write(state, (u8 *) tune0, sizeof(tune0));
|
|
if (ret < 0)
|
|
goto failed;
|
|
usleep_range(3000, 4000);
|
|
|
|
/* convert freq to 10.6 fixed point float [MHz] */
|
|
f = freq / 1000000;
|
|
tmp = freq % 1000000;
|
|
div = 1000000;
|
|
for (i = 0; i < 6; i++) {
|
|
f <<= 1;
|
|
div >>= 1;
|
|
if (tmp > div) {
|
|
tmp -= div;
|
|
f |= 1;
|
|
}
|
|
}
|
|
if (tmp > 7812)
|
|
f++;
|
|
tune1[0].val = f & 0xff;
|
|
tune1[1].val = f >> 8;
|
|
ret = raw_write(state, (u8 *) tune1, sizeof(tune1));
|
|
if (ret < 0)
|
|
goto failed;
|
|
msleep(31);
|
|
|
|
ret = reg_write(state, 0x1a, 0x0d);
|
|
if (ret < 0)
|
|
goto failed;
|
|
ret = raw_write(state, (u8 *) set_idac, sizeof(set_idac));
|
|
if (ret < 0)
|
|
goto failed;
|
|
return 0;
|
|
|
|
failed:
|
|
dev_warn(&state->i2c->dev, "(%s) failed. [adap%d-fe%d]\n",
|
|
__func__, fe->dvb->num, fe->id);
|
|
return ret;
|
|
}
|
|
|
|
static const struct reg_val standby_data[] = {
|
|
{ 0x01, 0x00 },
|
|
{ 0x13, 0x00 }
|
|
};
|
|
|
|
static int mxl301rf_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct mxl301rf_state *state;
|
|
int ret;
|
|
|
|
state = fe->tuner_priv;
|
|
ret = raw_write(state, (u8 *)standby_data, sizeof(standby_data));
|
|
if (ret < 0)
|
|
dev_warn(&state->i2c->dev, "(%s) failed. [adap%d-fe%d]\n",
|
|
__func__, fe->dvb->num, fe->id);
|
|
return ret;
|
|
}
|
|
|
|
|
|
/* init sequence is not public.
|
|
* the parent must have init'ed the device.
|
|
* just wake up here.
|
|
*/
|
|
static int mxl301rf_init(struct dvb_frontend *fe)
|
|
{
|
|
struct mxl301rf_state *state;
|
|
int ret;
|
|
|
|
state = fe->tuner_priv;
|
|
|
|
ret = reg_write(state, 0x01, 0x01);
|
|
if (ret < 0) {
|
|
dev_warn(&state->i2c->dev, "(%s) failed. [adap%d-fe%d]\n",
|
|
__func__, fe->dvb->num, fe->id);
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* I2C driver functions */
|
|
|
|
static const struct dvb_tuner_ops mxl301rf_ops = {
|
|
.info = {
|
|
.name = "MaxLinear MxL301RF",
|
|
|
|
.frequency_min = 93000000,
|
|
.frequency_max = 803142857,
|
|
},
|
|
|
|
.init = mxl301rf_init,
|
|
.sleep = mxl301rf_sleep,
|
|
|
|
.set_params = mxl301rf_set_params,
|
|
.get_rf_strength = mxl301rf_get_rf_strength,
|
|
};
|
|
|
|
|
|
static int mxl301rf_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct mxl301rf_state *state;
|
|
struct mxl301rf_config *cfg;
|
|
struct dvb_frontend *fe;
|
|
|
|
state = kzalloc(sizeof(*state), GFP_KERNEL);
|
|
if (!state)
|
|
return -ENOMEM;
|
|
|
|
state->i2c = client;
|
|
cfg = client->dev.platform_data;
|
|
|
|
memcpy(&state->cfg, cfg, sizeof(state->cfg));
|
|
fe = cfg->fe;
|
|
fe->tuner_priv = state;
|
|
memcpy(&fe->ops.tuner_ops, &mxl301rf_ops, sizeof(mxl301rf_ops));
|
|
|
|
i2c_set_clientdata(client, &state->cfg);
|
|
dev_info(&client->dev, "MaxLinear MxL301RF attached.\n");
|
|
return 0;
|
|
}
|
|
|
|
static int mxl301rf_remove(struct i2c_client *client)
|
|
{
|
|
struct mxl301rf_state *state;
|
|
|
|
state = cfg_to_state(i2c_get_clientdata(client));
|
|
state->cfg.fe->tuner_priv = NULL;
|
|
kfree(state);
|
|
return 0;
|
|
}
|
|
|
|
|
|
static const struct i2c_device_id mxl301rf_id[] = {
|
|
{"mxl301rf", 0},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, mxl301rf_id);
|
|
|
|
static struct i2c_driver mxl301rf_driver = {
|
|
.driver = {
|
|
.name = "mxl301rf",
|
|
},
|
|
.probe = mxl301rf_probe,
|
|
.remove = mxl301rf_remove,
|
|
.id_table = mxl301rf_id,
|
|
};
|
|
|
|
module_i2c_driver(mxl301rf_driver);
|
|
|
|
MODULE_DESCRIPTION("MaxLinear MXL301RF tuner");
|
|
MODULE_AUTHOR("Akihiro TSUKADA");
|
|
MODULE_LICENSE("GPL");
|