mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 08:14:15 +08:00
4cbf0cd6bf
This increases the maxmium supported frequency on 32-bit systems from 2^31 (signed long as used by clk_ops.round_rate, maximum value: approx. 2.14GHz) to 2^32 (unsigned long as used by clk_ops.determine_rate, maximum value: approx. 4.29GHz). On Meson8/8b/8m2 the HDMI PLL and it's OD (post-dividers) are capable of running at up to 2.97GHz. So switch the divider implementation in clk-regmap to clk_ops.determine_rate to support these higher frequencies on 32-bit systems. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210517203724.1006254-4-martin.blumenstingl@googlemail.com
454 lines
11 KiB
C
454 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2015 Endless Mobile, Inc.
|
|
* Author: Carlo Caione <carlo@endlessm.com>
|
|
*
|
|
* Copyright (c) 2018 Baylibre, SAS.
|
|
* Author: Jerome Brunet <jbrunet@baylibre.com>
|
|
*/
|
|
|
|
/*
|
|
* In the most basic form, a Meson PLL is composed as follows:
|
|
*
|
|
* PLL
|
|
* +--------------------------------+
|
|
* | |
|
|
* | +--+ |
|
|
* in >>-----[ /N ]--->| | +-----+ |
|
|
* | | |------| DCO |---->> out
|
|
* | +--------->| | +--v--+ |
|
|
* | | +--+ | |
|
|
* | | | |
|
|
* | +--[ *(M + (F/Fmax) ]<--+ |
|
|
* | |
|
|
* +--------------------------------+
|
|
*
|
|
* out = in * (m + frac / frac_max) / n
|
|
*/
|
|
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/math64.h>
|
|
#include <linux/module.h>
|
|
#include <linux/rational.h>
|
|
|
|
#include "clk-regmap.h"
|
|
#include "clk-pll.h"
|
|
|
|
static inline struct meson_clk_pll_data *
|
|
meson_clk_pll_data(struct clk_regmap *clk)
|
|
{
|
|
return (struct meson_clk_pll_data *)clk->data;
|
|
}
|
|
|
|
static int __pll_round_closest_mult(struct meson_clk_pll_data *pll)
|
|
{
|
|
if ((pll->flags & CLK_MESON_PLL_ROUND_CLOSEST) &&
|
|
!MESON_PARM_APPLICABLE(&pll->frac))
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned long __pll_params_to_rate(unsigned long parent_rate,
|
|
unsigned int m, unsigned int n,
|
|
unsigned int frac,
|
|
struct meson_clk_pll_data *pll)
|
|
{
|
|
u64 rate = (u64)parent_rate * m;
|
|
|
|
if (frac && MESON_PARM_APPLICABLE(&pll->frac)) {
|
|
u64 frac_rate = (u64)parent_rate * frac;
|
|
|
|
rate += DIV_ROUND_UP_ULL(frac_rate,
|
|
(1 << pll->frac.width));
|
|
}
|
|
|
|
return DIV_ROUND_UP_ULL(rate, n);
|
|
}
|
|
|
|
static unsigned long meson_clk_pll_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_regmap *clk = to_clk_regmap(hw);
|
|
struct meson_clk_pll_data *pll = meson_clk_pll_data(clk);
|
|
unsigned int m, n, frac;
|
|
|
|
n = meson_parm_read(clk->map, &pll->n);
|
|
|
|
/*
|
|
* On some HW, N is set to zero on init. This value is invalid as
|
|
* it would result in a division by zero. The rate can't be
|
|
* calculated in this case
|
|
*/
|
|
if (n == 0)
|
|
return 0;
|
|
|
|
m = meson_parm_read(clk->map, &pll->m);
|
|
|
|
frac = MESON_PARM_APPLICABLE(&pll->frac) ?
|
|
meson_parm_read(clk->map, &pll->frac) :
|
|
0;
|
|
|
|
return __pll_params_to_rate(parent_rate, m, n, frac, pll);
|
|
}
|
|
|
|
static unsigned int __pll_params_with_frac(unsigned long rate,
|
|
unsigned long parent_rate,
|
|
unsigned int m,
|
|
unsigned int n,
|
|
struct meson_clk_pll_data *pll)
|
|
{
|
|
unsigned int frac_max = (1 << pll->frac.width);
|
|
u64 val = (u64)rate * n;
|
|
|
|
/* Bail out if we are already over the requested rate */
|
|
if (rate < parent_rate * m / n)
|
|
return 0;
|
|
|
|
if (pll->flags & CLK_MESON_PLL_ROUND_CLOSEST)
|
|
val = DIV_ROUND_CLOSEST_ULL(val * frac_max, parent_rate);
|
|
else
|
|
val = div_u64(val * frac_max, parent_rate);
|
|
|
|
val -= m * frac_max;
|
|
|
|
return min((unsigned int)val, (frac_max - 1));
|
|
}
|
|
|
|
static bool meson_clk_pll_is_better(unsigned long rate,
|
|
unsigned long best,
|
|
unsigned long now,
|
|
struct meson_clk_pll_data *pll)
|
|
{
|
|
if (__pll_round_closest_mult(pll)) {
|
|
/* Round Closest */
|
|
if (abs(now - rate) < abs(best - rate))
|
|
return true;
|
|
} else {
|
|
/* Round down */
|
|
if (now <= rate && best < now)
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static int meson_clk_get_pll_table_index(unsigned int index,
|
|
unsigned int *m,
|
|
unsigned int *n,
|
|
struct meson_clk_pll_data *pll)
|
|
{
|
|
if (!pll->table[index].n)
|
|
return -EINVAL;
|
|
|
|
*m = pll->table[index].m;
|
|
*n = pll->table[index].n;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int meson_clk_get_pll_range_m(unsigned long rate,
|
|
unsigned long parent_rate,
|
|
unsigned int n,
|
|
struct meson_clk_pll_data *pll)
|
|
{
|
|
u64 val = (u64)rate * n;
|
|
|
|
if (__pll_round_closest_mult(pll))
|
|
return DIV_ROUND_CLOSEST_ULL(val, parent_rate);
|
|
|
|
return div_u64(val, parent_rate);
|
|
}
|
|
|
|
static int meson_clk_get_pll_range_index(unsigned long rate,
|
|
unsigned long parent_rate,
|
|
unsigned int index,
|
|
unsigned int *m,
|
|
unsigned int *n,
|
|
struct meson_clk_pll_data *pll)
|
|
{
|
|
*n = index + 1;
|
|
|
|
/* Check the predivider range */
|
|
if (*n >= (1 << pll->n.width))
|
|
return -EINVAL;
|
|
|
|
if (*n == 1) {
|
|
/* Get the boundaries out the way */
|
|
if (rate <= pll->range->min * parent_rate) {
|
|
*m = pll->range->min;
|
|
return -ENODATA;
|
|
} else if (rate >= pll->range->max * parent_rate) {
|
|
*m = pll->range->max;
|
|
return -ENODATA;
|
|
}
|
|
}
|
|
|
|
*m = meson_clk_get_pll_range_m(rate, parent_rate, *n, pll);
|
|
|
|
/* the pre-divider gives a multiplier too big - stop */
|
|
if (*m >= (1 << pll->m.width))
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int meson_clk_get_pll_get_index(unsigned long rate,
|
|
unsigned long parent_rate,
|
|
unsigned int index,
|
|
unsigned int *m,
|
|
unsigned int *n,
|
|
struct meson_clk_pll_data *pll)
|
|
{
|
|
if (pll->range)
|
|
return meson_clk_get_pll_range_index(rate, parent_rate,
|
|
index, m, n, pll);
|
|
else if (pll->table)
|
|
return meson_clk_get_pll_table_index(index, m, n, pll);
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int meson_clk_get_pll_settings(unsigned long rate,
|
|
unsigned long parent_rate,
|
|
unsigned int *best_m,
|
|
unsigned int *best_n,
|
|
struct meson_clk_pll_data *pll)
|
|
{
|
|
unsigned long best = 0, now = 0;
|
|
unsigned int i, m, n;
|
|
int ret;
|
|
|
|
for (i = 0, ret = 0; !ret; i++) {
|
|
ret = meson_clk_get_pll_get_index(rate, parent_rate,
|
|
i, &m, &n, pll);
|
|
if (ret == -EINVAL)
|
|
break;
|
|
|
|
now = __pll_params_to_rate(parent_rate, m, n, 0, pll);
|
|
if (meson_clk_pll_is_better(rate, best, now, pll)) {
|
|
best = now;
|
|
*best_m = m;
|
|
*best_n = n;
|
|
|
|
if (now == rate)
|
|
break;
|
|
}
|
|
}
|
|
|
|
return best ? 0 : -EINVAL;
|
|
}
|
|
|
|
static int meson_clk_pll_determine_rate(struct clk_hw *hw,
|
|
struct clk_rate_request *req)
|
|
{
|
|
struct clk_regmap *clk = to_clk_regmap(hw);
|
|
struct meson_clk_pll_data *pll = meson_clk_pll_data(clk);
|
|
unsigned int m, n, frac;
|
|
unsigned long round;
|
|
int ret;
|
|
|
|
ret = meson_clk_get_pll_settings(req->rate, req->best_parent_rate,
|
|
&m, &n, pll);
|
|
if (ret)
|
|
return ret;
|
|
|
|
round = __pll_params_to_rate(req->best_parent_rate, m, n, 0, pll);
|
|
|
|
if (!MESON_PARM_APPLICABLE(&pll->frac) || req->rate == round) {
|
|
req->rate = round;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The rate provided by the setting is not an exact match, let's
|
|
* try to improve the result using the fractional parameter
|
|
*/
|
|
frac = __pll_params_with_frac(req->rate, req->best_parent_rate, m, n, pll);
|
|
req->rate = __pll_params_to_rate(req->best_parent_rate, m, n, frac, pll);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int meson_clk_pll_wait_lock(struct clk_hw *hw)
|
|
{
|
|
struct clk_regmap *clk = to_clk_regmap(hw);
|
|
struct meson_clk_pll_data *pll = meson_clk_pll_data(clk);
|
|
int delay = 24000000;
|
|
|
|
do {
|
|
/* Is the clock locked now ? */
|
|
if (meson_parm_read(clk->map, &pll->l))
|
|
return 0;
|
|
|
|
delay--;
|
|
} while (delay > 0);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int meson_clk_pll_init(struct clk_hw *hw)
|
|
{
|
|
struct clk_regmap *clk = to_clk_regmap(hw);
|
|
struct meson_clk_pll_data *pll = meson_clk_pll_data(clk);
|
|
|
|
if (pll->init_count) {
|
|
meson_parm_write(clk->map, &pll->rst, 1);
|
|
regmap_multi_reg_write(clk->map, pll->init_regs,
|
|
pll->init_count);
|
|
meson_parm_write(clk->map, &pll->rst, 0);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int meson_clk_pll_is_enabled(struct clk_hw *hw)
|
|
{
|
|
struct clk_regmap *clk = to_clk_regmap(hw);
|
|
struct meson_clk_pll_data *pll = meson_clk_pll_data(clk);
|
|
|
|
if (meson_parm_read(clk->map, &pll->rst) ||
|
|
!meson_parm_read(clk->map, &pll->en) ||
|
|
!meson_parm_read(clk->map, &pll->l))
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int meson_clk_pcie_pll_enable(struct clk_hw *hw)
|
|
{
|
|
meson_clk_pll_init(hw);
|
|
|
|
if (meson_clk_pll_wait_lock(hw))
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int meson_clk_pll_enable(struct clk_hw *hw)
|
|
{
|
|
struct clk_regmap *clk = to_clk_regmap(hw);
|
|
struct meson_clk_pll_data *pll = meson_clk_pll_data(clk);
|
|
|
|
/* do nothing if the PLL is already enabled */
|
|
if (clk_hw_is_enabled(hw))
|
|
return 0;
|
|
|
|
/* Make sure the pll is in reset */
|
|
meson_parm_write(clk->map, &pll->rst, 1);
|
|
|
|
/* Enable the pll */
|
|
meson_parm_write(clk->map, &pll->en, 1);
|
|
|
|
/* Take the pll out reset */
|
|
meson_parm_write(clk->map, &pll->rst, 0);
|
|
|
|
if (meson_clk_pll_wait_lock(hw))
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void meson_clk_pll_disable(struct clk_hw *hw)
|
|
{
|
|
struct clk_regmap *clk = to_clk_regmap(hw);
|
|
struct meson_clk_pll_data *pll = meson_clk_pll_data(clk);
|
|
|
|
/* Put the pll is in reset */
|
|
meson_parm_write(clk->map, &pll->rst, 1);
|
|
|
|
/* Disable the pll */
|
|
meson_parm_write(clk->map, &pll->en, 0);
|
|
}
|
|
|
|
static int meson_clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_regmap *clk = to_clk_regmap(hw);
|
|
struct meson_clk_pll_data *pll = meson_clk_pll_data(clk);
|
|
unsigned int enabled, m, n, frac = 0;
|
|
unsigned long old_rate;
|
|
int ret;
|
|
|
|
if (parent_rate == 0 || rate == 0)
|
|
return -EINVAL;
|
|
|
|
old_rate = clk_hw_get_rate(hw);
|
|
|
|
ret = meson_clk_get_pll_settings(rate, parent_rate, &m, &n, pll);
|
|
if (ret)
|
|
return ret;
|
|
|
|
enabled = meson_parm_read(clk->map, &pll->en);
|
|
if (enabled)
|
|
meson_clk_pll_disable(hw);
|
|
|
|
meson_parm_write(clk->map, &pll->n, n);
|
|
meson_parm_write(clk->map, &pll->m, m);
|
|
|
|
if (MESON_PARM_APPLICABLE(&pll->frac)) {
|
|
frac = __pll_params_with_frac(rate, parent_rate, m, n, pll);
|
|
meson_parm_write(clk->map, &pll->frac, frac);
|
|
}
|
|
|
|
/* If the pll is stopped, bail out now */
|
|
if (!enabled)
|
|
return 0;
|
|
|
|
ret = meson_clk_pll_enable(hw);
|
|
if (ret) {
|
|
pr_warn("%s: pll did not lock, trying to restore old rate %lu\n",
|
|
__func__, old_rate);
|
|
/*
|
|
* FIXME: Do we really need/want this HACK ?
|
|
* It looks unsafe. what happens if the clock gets into a
|
|
* broken state and we can't lock back on the old_rate ? Looks
|
|
* like an infinite recursion is possible
|
|
*/
|
|
meson_clk_pll_set_rate(hw, old_rate, parent_rate);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* The Meson G12A PCIE PLL is fined tuned to deliver a very precise
|
|
* 100MHz reference clock for the PCIe Analog PHY, and thus requires
|
|
* a strict register sequence to enable the PLL.
|
|
* To simplify, re-use the _init() op to enable the PLL and keep
|
|
* the other ops except set_rate since the rate is fixed.
|
|
*/
|
|
const struct clk_ops meson_clk_pcie_pll_ops = {
|
|
.recalc_rate = meson_clk_pll_recalc_rate,
|
|
.determine_rate = meson_clk_pll_determine_rate,
|
|
.is_enabled = meson_clk_pll_is_enabled,
|
|
.enable = meson_clk_pcie_pll_enable,
|
|
.disable = meson_clk_pll_disable
|
|
};
|
|
EXPORT_SYMBOL_GPL(meson_clk_pcie_pll_ops);
|
|
|
|
const struct clk_ops meson_clk_pll_ops = {
|
|
.init = meson_clk_pll_init,
|
|
.recalc_rate = meson_clk_pll_recalc_rate,
|
|
.determine_rate = meson_clk_pll_determine_rate,
|
|
.set_rate = meson_clk_pll_set_rate,
|
|
.is_enabled = meson_clk_pll_is_enabled,
|
|
.enable = meson_clk_pll_enable,
|
|
.disable = meson_clk_pll_disable
|
|
};
|
|
EXPORT_SYMBOL_GPL(meson_clk_pll_ops);
|
|
|
|
const struct clk_ops meson_clk_pll_ro_ops = {
|
|
.recalc_rate = meson_clk_pll_recalc_rate,
|
|
.is_enabled = meson_clk_pll_is_enabled,
|
|
};
|
|
EXPORT_SYMBOL_GPL(meson_clk_pll_ro_ops);
|
|
|
|
MODULE_DESCRIPTION("Amlogic PLL driver");
|
|
MODULE_AUTHOR("Carlo Caione <carlo@endlessm.com>");
|
|
MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
|
|
MODULE_LICENSE("GPL v2");
|